summaryrefslogtreecommitdiffstats
path: root/arch/m68k/atari
AgeCommit message (Collapse)AuthorFilesLines
2018-10-31mm: remove include/linux/bootmem.hMike Rapoport1-1/+1
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31memblock: replace alloc_bootmem_low_pages with memblock_alloc_lowMike Rapoport1-1/+2
The alloc_bootmem_low_pages() function allocates PAGE_SIZE aligned regions from low memory. memblock_alloc_low() with alignment set to PAGE_SIZE does exactly the same thing. The conversion is done using the following semantic patch: @@ expression e; @@ - alloc_bootmem_low_pages(e) + memblock_alloc_low(e, PAGE_SIZE) Link: http://lkml.kernel.org/r/1536927045-23536-19-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-29m68k: Remove unused set_clock_mmss() helpersArnd Bergmann2-68/+0
Commit 397ac99c6cef ("m68k: remove dead timer code") removed set_rtc_mmss() because it was unused in 2012. However, this was itself the only user of the mach_set_clock_mmss() callback and the many implementations of that callback, which are equally unused. This removes all of those as well. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2017-02-12m68k/atari: Modernize printing of kernel messagesGeert Uytterhoeven2-35/+35
- Convert from printk() to pr_*(), - Add missing continuations, to fix user-visible breakage, - Drop useless WARNING prefix, - Move trailing spaces to start of continuations. Note that the "Keyboard overrun" message will now only be generated when the kernel has been compiled for debugging. Fixes: 4bcc595ccd80decb ("printk: reinstate KERN_CONT for printing continuation lines") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2016-12-09m68k/atari: Use seq_puts() in atari_get_hardware_list()Markus Elfring1-1/+1
A string which did not contain a data format specification should be put into a sequence. Thus use the corresponding function "seq_puts". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2016-09-19m68k: Use IS_ENABLED() instead of checking for built-in or moduleGeert Uytterhoeven1-1/+1
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2016-01-10m68k/atari, m68k/sun3: Fix SCSI platform device registration when driver is ↵Finn Thain1-2/+2
modular Fixes: 3ff228af84b5 ("atari_scsi: Convert to platform device") Fixes: 0d31f8759109 ("sun3_scsi: Convert to platform device") Reported-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2015-01-15m68k/atari: Remove obsolete IRQ_TYPE_*Geert Uytterhoeven3-6/+4
IRQ_TYPE_SLOW, IRQ_TYPE_FAST, and IRQ_TYPE_PRIO are no longer used by the Atari platform interrupt code since commit 734085651c9b80aa ("[PATCH] m68k: convert atari irq code") in v2.6.18-rc1, so drop them. Note that their values have been reused for different purposes (IRQ_TYPE_NONE, IRQ_TYPE_EDGE_RISING, and IRQ_TYPE_EDGE_FALLING) since commit 6a6de9ef5850d063 ("[PATCH] genirq: core") in v2.6.18-rc1. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2015-01-13m68k/atari: Remove obsolete keyboard_tasklet schedulingGeert Uytterhoeven1-1/+0
If CONFIG_VT=n: arch/m68k/atari/built-in.o: In function `atari_keyboard_interrupt': atakeyb.c:(.text+0x1846): undefined reference to `keyboard_tasklet' atakeyb.c:(.text+0x1852): undefined reference to `keyboard_tasklet' I think the keyboard_tasklet scheduling is no longer needed, as I believe it's handled by drivers/tty/vt/keyboard.c based on events received from the input subsystem. So just remove it. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Michael Schmitz <schmitz@debian.org>
2015-01-11m68k/atari: atakeyb.c - Remove some unused functionsRickard Strandqvist1-66/+0
Remove some functions that are not used anywhere: atari_kbd_leds() ikbd_exec() ikbd_mem_read() ikbd_mem_write() ikbd_clock_get() ikbd_clock_set() ikbd_pause() ikbd_resume() This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2014-11-20atari_scsi: Convert to platform deviceFinn Thain1-0/+27
Convert atari_scsi to platform device and eliminate scsi_register(). Validate __setup options later on so that module options are checked as well. Remove the comment about the scsi mid-layer disabling the host irq as it is no longer true (AFAICT). Also remove the obsolete slow interrupt stuff (IRQ_TYPE_SLOW == 0 anyway). Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-20atari_scsi: Fix atari_scsi deadlocks on FalconFinn Thain1-21/+40
Don't disable irqs when waiting for the ST DMA "lock"; its release may require an interrupt. Introduce stdma_try_lock() for use in soft irq context. atari_scsi now tells the SCSI mid-layer to defer queueing a command if the ST DMA lock is not available, as per Michael's patch: http://marc.info/?l=linux-m68k&m=139095335824863&w=2 The falcon_got_lock variable is race prone: we can't disable IRQs while waiting to acquire the lock, so after acquiring it there must be some interval during which falcon_got_lock remains false. Introduce stdma_is_locked_by() to replace falcon_got_lock. The falcon_got_lock tests in the EH handlers are incorrect these days. It can happen that an EH handler is called after a command completes normally. Remove these checks along with falcon_got_lock. Also remove the complicated and racy fairness wait queues. If fairness is an issue (when SCSI competes with IDE for the ST DMA interrupt), the solution is likely to be a lower value for host->can_queue. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-14m68k/atari - stram: Add missing #include <linux/ioport.h>Geert Uytterhoeven1-0/+1
If CONFIG_BLOCK=n: arch/m68k/atari/stram.c:44: error: variable ‘stram_pool’ has initializer but incomplete type arch/m68k/atari/stram.c:45: error: unknown field ‘name’ specified in initializer arch/m68k/atari/stram.c:46: warning: excess elements in struct initializer arch/m68k/atari/stram.c:46: warning: (near initialization for ‘stram_pool’) arch/m68k/atari/stram.c: In function ‘atari_stram_reserve_pages’: arch/m68k/atari/stram.c:97: error: invalid use of undefined type ‘struct resource’ ... Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2014-05-26m68k/atari - stram: alloc ST-RAM pool even if kernel not in ST-RAMMichael Schmitz1-17/+54
With the kernel loaded to FastRAM (TT-RAM), none of the ST-RAM address range is mapped by init_mem, and ST-RAM is not accessible through the normal allocation pathways as a result. Implement ST-RAM pool allocation to be based on physical addresses always (it already was when the kernel was loaded in ST-RAM). Return kernel virtual addresses as per normal. The current test for the kernel residing in ST-RAM always returns true. Use the bootinfo memory chunk order instead - with the kernel in FastRAM, ST-RAM (phys. 0x0) is not the first chunk. In case the kernel is running from FastRAM, delay mapping of ST-RAM pool until after mem_init. Provide helper functions for those users of ST-RAM that need to be aware of the backing physical addresses. Kudos to Geert for his hints on getting this started. Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2014-03-20m68k: atari: Fix the last kernel_stat.h falloutThomas Gleixner1-0/+1
Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-01-13m68k/irq - Use polled IRQ flag for MFP timer cascaded interruptsMichael Schmitz1-0/+3
Some Atari hardware has no capacity to raise interrupts (e.g. network or USB adapter hardware attached via ROM port). The driver interrupt routine is called from a timer interrupt (timer D) in these cases, using chained device specific pseudo interrupts (IRQ_MFP_TIMER1 ff.) These interrupts will more often than not, return IRQ_NONE as there is not always work for the device handler when called. Too many unhandled interrupts will result in the interrupt being disabled by the stuck interrupt watchdog. As preferred option to flag interrupts as needing exclusion from the watchdog mechanism, tglx added the IRQ_IS_POLLED flag for use in such a case. Currently, two interrupts need to use this flag. Add more users as needed. Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-12-08m68k/amiga,atari: Fix specifying multiple debug= parametersGeert Uytterhoeven1-1/+4
Since commit d6713b4091a99fa2af2fabdcd2f3fb97f32ecf2e ("m68k: early parameter support"), the user can specify multiple debug consoles using the "debug=" kernel command line parameter. However, as there's only a single struct console object, which is reused, it would actually register the same console object multiple times, causing the following warning: WARNING: CPU: 0 PID: 0 at kernel/printk/printk.c:2233 register_console+0x36/ console 'debug0' already registered Make sure to register the console object only once, to avoid the warning. Note that still only one console (the one corresponding to the last "debug=" parameter) will be active at the same time, as the .write() method of the already registered console object is overwritten by a subsequent "debug=" parameter. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-11-26m68k/UAPI: Use proper types (endianness/size) in <asm/bootinfo*.h>Geert Uytterhoeven1-4/+5
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-11-26m68k/UAPI: Disintegrate arch/m68k/include/asm/bootinfo.hGeert Uytterhoeven1-0/+1
Export the bootinfo definitions that are used by bootstrap loaders, and split them up in generic and platform-specific parts. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-04-16m68k/atari: USB - add platform devices for EtherNAT/NetUSBee ISP1160 HCDMichael Schmitz1-6/+129
Add platform devices used by the isp116x-hcd driver for EtherNAT and NetUSBee. Note that the NetUSBee also contains a RTL8019 Ethernet chip, so its platform device is used to cover the EtherNEC case, too. Register definitions thanks to David Galvez <dgalvez75@gmail.com> [Geert] Conditionalize isp1160_delay() definition Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-04-16m68k/atari: EtherNAT - add interrupt chip definition for CPLD interruptsMichael Schmitz1-0/+82
Add a dedicated interrupt chip definition for the EtherNAT CPLD interrupts. SMC91C111 and ISP1160 chips have separate interrupts that can be enabled and disabled in a CPLD register at offset 0x23 from the card base. Note the CPLD interrupt control register is mapped on demand, whenever any interrupt enable/disable action is requested. The EtherNAT USB driver still needs interrupts disabled around reset and start actions. In particular, we cannot entirely rely on the irq_startup being called first. The smc91x and isp116x-hcd drivers will use this feature. Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-04-16m68k/atari: EtherNEC - add platform device supportMichael Schmitz1-1/+53
Add platform device for the Atari ROM port ethernet adapter, EtherNEC. This platform device will be used by the ne.c driver. [Geert] Conditionalize platform device data structures Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-04-16m68k/atari: EtherNAT - platform device and IRQ support codeMichael Schmitz1-0/+64
Add platform device and interrupt definitions necessary for the EtherNAT Ethernet/USB adapter for the Falcon extension port. EtherNAT interrupt numbers are 139/140 so the max. interrupt number for Atari has to be increased. [Geert] Conditionalize platform device data structures Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-04-16m68k/atari: use dedicated irq_chip for timer D interruptsMichael Schmitz1-0/+70
Add a special irq_chip for the Atari MFP timer D interrupt, which is used as a polling timer for EtherNEC and NetUSBee Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-12-24m68k: set arch_gettimeoffset directlyStephen Warren2-5/+5
remove m68k's mach_gettimeoffset function pointer, and instead directly set the arch_gettimeoffset function pointer. This requires multiplying all function results by 1000, since the removed m68k_gettimeoffset() did this. Also, s/unsigned long/u32/ just to make the function prototypes exactly match that of arch_gettimeoffset. Cc: Joshua Thompson <funaho@jurai.org> Cc: Sam Creasey <sammy@sammy.net> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Phil Blundell <philb@gnu.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-22m68k/atari: Change VME irq numbers from unsigned long to unsigned intGeert Uytterhoeven1-2/+2
Device interrupts numbers were changed to unsigned int in 1997, the year IRQ_MACHSPEC was killed as well. Also kill a related cast while we're at it. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: netdev@vger.kernel.org
2012-03-28Disintegrate asm/system.h for M68KDavid Howells3-3/+0
Disintegrate asm/system.h for M68K. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Greg Ungerer <gerg@uclinux.org> cc: linux-m68k@lists.linux-m68k.org
2012-01-22m68k: Fix assembler constraint to prevent overeager gcc optimisationAndreas Schwab1-4/+4
Passing the address of a variable as an operand to an asm statement doesn't mark the value of this variable as used, so gcc may optimize its initialisation away. Fix this by using the "m" constraint instead. Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: stable@vger.kernel.org
2011-12-10m68k/atari: Move declaration of atari_SCC_reset_done to header fileGeert Uytterhoeven2-3/+0
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/irq: Remove obsolete support for user vector interrupt fixupsGeert Uytterhoeven1-1/+1
It was used on Apollo only, before its conversion to genirq. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/atari: Remove code and comments about different irq typesGeert Uytterhoeven1-236/+0
This code was obsoleted during the irq restructuring in 2006. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/irq: Add m68k_setup_irq_controller()Geert Uytterhoeven1-1/+2
This is a wrapper around m68k_setup_irq_chip() that discards its dummy second parameter, to ease the future transition to genirq. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/irq: Switch irq_chip methods to "struct irq_data *data"Geert Uytterhoeven1-8/+22
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2011-11-08m68k/irq: Rename irq_controller to irq_chipGeert Uytterhoeven1-8/+7
Make it more similar to the genirq version: - Remove lock (unused as we don't do SMP anyway), - Prepend methods with irq_, - Make irq_startup() return unsigned int. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2011-10-31m68k: Add export.h to the m68k specific files as requiredPaul Gortmaker1-0/+1
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-07-30m68k/atari: Reserve some ST-RAM early on for device buffer useMichael Schmitz1-285/+69
Based on an original patch from Michael Schmitz: Because mem_init() is now called before device init, devices that rely on ST-RAM may find all ST-RAM already allocated to other users by the time device init happens. In particular, a large initrd RAM disk may use up enough of ST-RAM to cause atari_stram_alloc() to resort to __get_dma_pages() allocation. In the current state of Atari memory management, all of RAM is marked DMA capable, so __get_dma_pages() may well return RAM that is not in actual fact DMA capable. Using this for frame buffer or SCSI DMA buffer causes subtle failure. The ST-RAM allocator has been changed to allocate memory from a pool of reserved ST-RAM of configurable size, set aside on ST-RAM init (i.e. before mem_init()). As long as this pool is not exhausted, allocation of real ST-RAM can be guaranteed. Other changes: - Replace the custom allocator in the ST-RAM pool by the existing allocator in the resource subsystem, - Remove mem_init_done and its hook, as memory init is now done before device init, - Remove /proc/stram, as ST-RAM usage now shows up under /proc/iomem, e.g. 005f2000-006f1fff : ST-RAM Pool 005f2000-0063dfff : atafb 0063e000-00641fff : ataflop 00642000-00642fff : SCSI Signed-off-by: Michael Schmitz <schmitz@debian.org> [Andreas Schwab <schwab@linux-m68k.org>: Use memparse()] [Geert: Use the resource subsystem instead of a custom allocator] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-05-19input/atari: Use the correct mouse interrupt hookMichael Schmitz1-5/+2
The Atari keyboard driver calls atari_mouse_interrupt_hook if it's set, not atari_input_mouse_interrupt_hook. Fix below. [geert] Killed off atari_mouse_interrupt_hook completely, after fixing another incorrect assignment in atarimouse.c. Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-05-19m68k/atari: Do not use "/" in interrupt namesGeert Uytterhoeven2-2/+2
It may trigger a warning in fs/proc/generic.c:__xlate_proc_name() when trying to add an entry for the interrupt handler to sysfs. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-03-31Fix common misspellingsLucas De Marchi1-1/+1
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-01-23m68k/atari: Rename "scc" to "atari_scc"Geert Uytterhoeven3-10/+10
It's a way too generic name for a global #define and conflicts with a variable with the same name, causing build errors like: | drivers/staging/brcm80211/brcmfmac/../util/siutils.c: In function ‘_si_clkctl_cc’: | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1364: error: expected identifier or ‘(’ before ‘volatile’ | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1364: error: expected ‘)’ before ‘(’ token | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1421: error: incompatible types in assignment | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1422: error: invalid operands to binary & | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1423: error: invalid operands to binary & | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1424: error: invalid operands to binary | | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: incompatible type for argument 4 of ‘bcmsdh_reg_write’ | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1428: error: invalid operands to binary & | make[8]: *** [drivers/staging/brcm80211/brcmfmac/../util/siutils.o] Error 1 Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-02-09tree-wide: Assorted spelling fixesDaniel Mack1-1/+1
In particular, several occurances of funny versions of 'success', 'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address', 'beginning', 'desirable', 'separate' and 'necessary' are fixed. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Joe Perches <joe@perches.com> Cc: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-02-22m68k: atari - Rename "mfp" to "st_mfp"Geert Uytterhoeven5-26/+26
http://kisskb.ellerman.id.au/kisskb/buildresult/72115/: | net/mac80211/ieee80211_i.h:327: error: syntax error before 'volatile' | net/mac80211/ieee80211_i.h:350: error: syntax error before '}' token | net/mac80211/ieee80211_i.h:455: error: field 'sta' has incomplete type | distcc[19430] ERROR: compile net/mac80211/main.c on sprygo/32 failed This is caused by | # define mfp ((*(volatile struct MFP*)MFP_BAS)) in arch/m68k/include/asm/atarihw.h, which conflicts with the new "mfp" enum in net/mac80211/ieee80211_i.h. Rename "mfp" to "st_mfp", as it's a way too generic name for a global #define. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-12m68k: atari core - Kill warn_unused_result warningsGeert Uytterhoeven3-6/+13
warning: ignoring return value of 'request_irq', declared with attribute warn_unused_result Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-01-12m68k: Kill several external declarations in source filesGeert Uytterhoeven1-1/+0
- Replace external declarations by proper includes where availiable. The accesses to some symbols had to be modified, as before they were declared using e.g. "extern int _end", while asm-generic/sections.h uses e.g. "extern char _end[]" - Remove unused or superfluous external declarations Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2008-10-23proc: move /proc/stram to m68k-specific codeAlexey Dobriyan1-6/+22
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2008-10-23proc: move /proc/hardware to m68k-specific codeAlexey Dobriyan1-8/+7
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2008-10-14m68k: Remove the broken Hades supportAdrian Bunk4-472/+14
This patch removes the Hades support that was marked as BROKEN 5 years ago. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14m68k: Define rtc_lock on AtariGeert Uytterhoeven1-0/+3
The nvram and rtc-cmos drivers use the spinlock rtc_lock to protect against concurrent accesses to the CMOS memory. As m68k doesn't support SMP or preempt yet, the spinlock calls tend to get optimized away, but not for all configurations, causing in some rare cases: | ERROR: "rtc_lock" [drivers/rtc/rtc-cmos.ko] undefined! | ERROR: "rtc_lock" [drivers/char/nvram.ko] undefined! Add the spinlock to the Atari core code to avoid this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14m68k: Remove unused atari_kbd_translate()Geert Uytterhoeven1-12/+0
If CONFIG_VT=n, I get: | arch/m68k/atari/built-in.o: In function `atari_kbd_translate': | arch/m68k/atari/atakeyb.c:640: undefined reference to `shift_state' Just remove atari_kbd_translate(), as it's unused. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14m68k: use bcd2bin/bin2bcdAdrian Bunk1-17/+18
This patch changes m68k to use the new bcd2bin/bin2bcd functions instead of the obsolete BCD_TO_BIN/BIN_TO_BCD/BCD2BIN/BIN2BCD macros. It also remove local bcd2bin/bin2bcd implementations in favor of the global ones. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 19:04:15 +0000