summaryrefslogtreecommitdiffstats
path: root/arch/m68k/apollo
AgeCommit message (Collapse)AuthorFilesLines
2022-02-21m68k: Add asm/config.hLaurent Vivier1-0/+1
To avoid 'warning: no previous prototype for' errors, declare all the parse_bootinfo and config function prototypes into asm/config.h and include it in arch/m68k/kernel/setup_mm.c and arch/m68k/*/config.c. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Link: https://lore.kernel.org/r/20220121200738.2577697-2-laurent@vivier.eu Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2020-12-16Merge tag 'asm-generic-timers-5.11' of ↵Linus Torvalds1-6/+5
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic cross-architecture timer cleanup from Arnd Bergmann: "This cleans up two ancient timer features that were never completed in the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET. There was only one user left for the ARCH_USES_GETTIMEOFFSET variant of clocksource implementations, the ARM EBSA110 platform. Rather than changing to use modern timekeeping, we remove the platform entirely as Russell no longer uses his machine and nobody else seems to have one any more. The conditional code for using arch_gettimeoffset() is removed as a result. For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms not using clockevent drivers: parisc, ia64, most of m68k, and one Arm platform. These all do timer ticks slighly differently, and this gets cleaned up to the point they at least all call the same helper function. Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in Kconfig, the polarity is now reversed, with the few remaining ones selecting LEGACY_TIMER_TICK instead" * tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: timekeeping: default GENERIC_CLOCKEVENTS to enabled timekeeping: remove xtime_update m68k: remove timer_interrupt() function m68k: change remaining timers to legacy_timer_tick m68k: m68328: use legacy_timer_tick() m68k: sun3/sun3c: use legacy_timer_tick m68k: split heartbeat out of timer function m68k: coldfire: use legacy_timer_tick() parisc: use legacy_timer_tick ARM: rpc: use legacy_timer_tick ia64: convert to legacy_timer_tick timekeeping: add CONFIG_LEGACY_TIMER_TICK timekeeping: remove arch_gettimeoffset net: remove am79c961a driver ARM: remove ebsa110 platform
2020-11-02m68k: Remove unused mach_max_dma_addressLaurent Vivier1-1/+0
This information is unused since the discontinuous memory support has been introduced in 2007. Fixes: 12d810c1b8c2 ("m68k: discontinuous memory support") Signed-off-by: Laurent Vivier <laurent@vivier.eu> Link: https://lore.kernel.org/r/20201009095621.833192-1-laurent@vivier.eu Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2020-10-30m68k: remove timer_interrupt() functionArnd Bergmann1-2/+2
This gets passed to a number of init functions, but is ignored everywhere, so remove the function and change the mach_sched_init callback to take no arguments. Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-30m68k: change remaining timers to legacy_timer_tickArnd Bergmann1-4/+2
There are nine more machines that each have their own timer interrupt calling the m68k timer_interrupt() function through an indirect pointer. This function is now the same as legacy_timer_tick, so just call that directly and select the corresponding Kconfig symbol. Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-30m68k: split heartbeat out of timer functionArnd Bergmann1-0/+1
The heartbeat functionality is mostly separate from the actual timer interrupt handling, and it is only used on five platforms. Split it out into a separate function and call that directly from the timer irq on those platforms. Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-09mm: don't include asm/pgtable.h if linux/mm.h is already includedMike Rapoport1-1/+0
Patch series "mm: consolidate definitions of page table accessors", v2. The low level page table accessors (pXY_index(), pXY_offset()) are duplicated across all architectures and sometimes more than once. For instance, we have 31 definition of pgd_offset() for 25 supported architectures. Most of these definitions are actually identical and typically it boils down to, e.g. static inline unsigned long pmd_index(unsigned long address) { return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1); } static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address) { return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address); } These definitions can be shared among 90% of the arches provided XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined. For architectures that really need a custom version there is always possibility to override the generic version with the usual ifdefs magic. These patches introduce include/linux/pgtable.h that replaces include/asm-generic/pgtable.h and add the definitions of the page table accessors to the new header. This patch (of 12): The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the functions involving page table manipulations, e.g. pte_alloc() and pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h> in the files that include <linux/mm.h>. The include statements in such cases are remove with a simple loop: for f in $(git grep -l "include <linux/mm.h>") ; do sed -i -e '/include <asm\/pgtable.h>/ d' $f done Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Mike Rapoport <rppt@kernel.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-25m68k: apollo, q40, sun3, sun3x: Remove arch_gettimeoffset implementationsFinn Thain1-7/+0
These dummy implementations are no better than default_arch_gettimeoffset() so remove them. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-01-21m68k/apollo: Fix comment in MakefileJonathan Neuschäfer1-1/+1
This comment has been wrong since before git. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2018-07-29m68k: Remove unused set_clock_mmss() helpersArnd Bergmann1-8/+0
Commit 397ac99c6cef ("m68k: remove dead timer code") removed set_rtc_mmss() because it was unused in 2012. However, this was itself the only user of the mach_set_clock_mmss() callback and the many implementations of that callback, which are equally unused. This removes all of those as well. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2018-05-22m68k: Fix off-by-one calendar monthFinn Thain1-3/+5
This fixes a bug in read_persistent_clock() which causes the system clock to lag the Real Time Clock by one month. The problem was noticed on a Mac, but theoretically it must also affect Atari, BVME6000 and Q40. The tm_mon value in the struct rtc_time passed to mach_hwclk() is zero-based, and atari_mste_hwclk(), atari_tt_hwclk(), bvme6000_hwclk(), mac_hwclk() and q40_hwclk() all make this adjustment. Unfortunately, dn_dummy_hwclk(), mvme147_hwclk(), mvme16x_hwclk(), sun3_hwclk() and sun3x_hwclk() fail to decrement tm_mon. Also m68328_hwclk() assumes a one-based tm_mon. Bring these platforms into line and fix read_persistent_clock() so it works correctly on all m68k platforms. The datasheets for the RTC devices found on the affected platforms all confirm that the year is stored as a value in the range 0-99 and the month is stored as a value in the range 1-12. Please refer to the datasheets for MC146818 (Apollo), DS1643 (MVME), ICM7170 (Sun 3) and M48T02 (Sun 3x). Reported-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2-0/+2
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-04char/genrtc: remove m68k supportArnd Bergmann1-1/+0
The asm/rtc.h header is only used for the old gen_rtc driver that has been replaced by rtc-generic. According to Geert Uytterhoeven, nobody has used the old driver on m68k for a long time, so we can now just remove the header file and disallow the driver in Kconfig. All files that used to include asm/rtc.h are now changed so they include the headers that were used implicitly through asm/rtc.h. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2014-05-28m68k/apollo: Convert printk to pr_foo()Fabian Frederick1-10/+10
no level printk converted to pr_info This is untested Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-11-26m68k/UAPI: Use proper types (endianness/size) in <asm/bootinfo*.h>Geert Uytterhoeven1-7/+8
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-11-26m68k/UAPI: Disintegrate arch/m68k/include/asm/bootinfo.hGeert Uytterhoeven1-0/+1
Export the bootinfo definitions that are used by bootstrap loaders, and split them up in generic and platform-specific parts. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-11-26m68k: Mark functions only called from setup_arch() __initGeert Uytterhoeven1-5/+5
Some functions that are only called (indirectly) from setup_arch() lack __init annotations. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-12-24m68k: set arch_gettimeoffset directlyStephen Warren1-5/+4
remove m68k's mach_gettimeoffset function pointer, and instead directly set the arch_gettimeoffset function pointer. This requires multiplying all function results by 1000, since the removed m68k_gettimeoffset() did this. Also, s/unsigned long/u32/ just to make the function prototypes exactly match that of arch_gettimeoffset. Cc: Joshua Thompson <funaho@jurai.org> Cc: Sam Creasey <sammy@sammy.net> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Phil Blundell <philb@gnu.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-07-22m68k/apollo: Rename "timer" to "apollo_timer"Geert Uytterhoeven1-8/+8
In file included from include/linux/kgdb.h:17, from include/linux/fb.h:8, from drivers/video/dnfb.c:15: include/linux/serial_8250.h:71: error: expected identifier or ‘(’ before numeric constant include/linux/serial_8250.h:72: error: expected ‘;’ before ‘struct’ make[1]: *** [drivers/video/dnfb.o] Error 1 This is caused by #define timer (IO_BASE + timer_physaddr) in <asm/apollohw.h>, which conflicts with the new "timer" struct member in <linux/serial_8250.h>. Rename "timer" to "apollo_timer", as it's a way too generic name for a global #define. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> -- http://kisskb.ellerman.id.au/kisskb/buildresult/6739606/
2012-03-28Disintegrate asm/system.h for M68KDavid Howells1-1/+0
Disintegrate asm/system.h for M68K. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Greg Ungerer <gerg@uclinux.org> cc: linux-m68k@lists.linux-m68k.org
2011-11-08m68k/irq: Remove obsolete support for user vector interrupt fixupsGeert Uytterhoeven1-1/+1
It was used on Apollo only, before its conversion to genirq. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/irq: Remove obsolete m68k irq frameworkGeert Uytterhoeven1-22/+0
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/apollo: Convert Apollo to genirqGeert Uytterhoeven1-2/+23
Replace the custom user vector interrupt handler that calls do_IRQ() and does an EOI by handle_fasteoi_irq(). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Peter De Schrijver <p2@debian.org>
2011-11-08m68k/irq: Rename {,__}m68k_handle_int()Geert Uytterhoeven1-1/+1
- Rename m68k_handle_int() to generic_handle_irq(), and drop the unneeded asmlinkage, - Rename __m68k_handle_int() to do_IRQ(). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/irq: Add m68k_setup_irq_controller()Geert Uytterhoeven1-1/+2
This is a wrapper around m68k_setup_irq_chip() that discards its dummy second parameter, to ease the future transition to genirq. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/irq: Switch irq_chip methods to "struct irq_data *data"Geert Uytterhoeven1-2/+6
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2011-11-08m68k/irq: Rename irq_controller to irq_chipGeert Uytterhoeven1-6/+5
Make it more similar to the genirq version: - Remove lock (unused as we don't do SMP anyway), - Prepend methods with irq_, - Make irq_startup() return unsigned int. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2009-01-12m68k: apollo core - Kill warn_unused_result warningsGeert Uytterhoeven1-1/+2
warning: ignoring return value of 'request_irq', declared with attribute warn_unused_result Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-01-12m68k: Kill several external declarations in source filesGeert Uytterhoeven1-4/+0
- Replace external declarations by proper includes where availiable. The accesses to some symbols had to be modified, as before they were declared using e.g. "extern int _end", while asm-generic/sections.h uses e.g. "extern char _end[]" - Remove unused or superfluous external declarations Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2007-07-20m68k: missing __initAl Viro2-3/+3
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07SPIN_LOCK_UNLOCKED cleanup in arch/m68kMilind Arun Choudhary1-1/+1
SPIN_LOCK_UNLOCKED cleanup,use __SPIN_LOCK_UNLOCKED instead Signed-off-by: Milind Arun Choudhary <milindchoudhary@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-10-09[PATCH] m68k/Apollo: Remove obsolete arch/m68k/apollo/dma.cGeert Uytterhoeven1-50/+0
Remove unused arch/m68k/apollo/dma.c, which was obsoleted by the move to the generic DMA API. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-09IRQ: Use the new typedef for interrupt handler function pointersDavid Howells1-3/+3
Use the new typedef for interrupt handler function pointers rather than actually spelling out the full thing each time. This was scripted with the following small shell script: #!/bin/sh egrep -nHrl -e 'irqreturn_t[ ]*[(][*]' $* | while read i do echo $i perl -pi -e 's/irqreturn_t\s*[(]\s*[*]\s*([_a-zA-Z0-9]*)\s*[)]\s*[(]\s*int\s*,\s*void\s*[*]\s*[)]/irq_handler_t \1/g' $i || exit $? done Signed-Off-By: David Howells <dhowells@redhat.com>
2006-10-07[PATCH] m68k pt_regs fixesAl Viro2-8/+8
m68k_handle_int() split in two functions: __m68k_handle_int() takes pt_regs * and does set_irq_regs(); m68k_handle_int() doesn't get pt_regs *. Places where we used to call m68k_handle_int() recursively with the same pt_regs have simply lost the second argument, the rest is switched to __m68k_handle_int(). The rest of patch is just dropping pt_regs * where needed. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel1-1/+0
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-25[PATCH] m68k: convert apollo irq codeRoman Zippel2-128/+33
Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] m68k: Add the generic dma API functionsRoman Zippel1-1/+1
Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12[PATCH] m68k: Moved initialisation of conswitchp from subarches to global ↵Al Viro1-3/+0
arch setup Signed-off-by: Kars de Jong <jongk@linux-m68k.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds4-0/+485
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-13 03:31:29 +0000