summaryrefslogtreecommitdiffstats
path: root/arch/ia64
AgeCommit message (Collapse)AuthorFilesLines
2010-10-24Merge branch 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-0/+1
* 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (321 commits) KVM: Drop CONFIG_DMAR dependency around kvm_iommu_map_pages KVM: Fix signature of kvm_iommu_map_pages stub KVM: MCE: Send SRAR SIGBUS directly KVM: MCE: Add MCG_SER_P into KVM_MCE_CAP_SUPPORTED KVM: fix typo in copyright notice KVM: Disable interrupts around get_kernel_ns() KVM: MMU: Avoid sign extension in mmu_alloc_direct_roots() pae root address KVM: MMU: move access code parsing to FNAME(walk_addr) function KVM: MMU: audit: check whether have unsync sps after root sync KVM: MMU: audit: introduce audit_printk to cleanup audit code KVM: MMU: audit: unregister audit tracepoints before module unloaded KVM: MMU: audit: fix vcpu's spte walking KVM: MMU: set access bit for direct mapping KVM: MMU: cleanup for error mask set while walk guest page table KVM: MMU: update 'root_hpa' out of loop in PAE shadow path KVM: x86 emulator: Eliminate compilation warning in x86_decode_insn() KVM: x86: Fix constant type in kvm_get_time_scale KVM: VMX: Add AX to list of registers clobbered by guest switch KVM guest: Move a printk that's using the clock before it's ready KVM: x86: TSC catchup mode ...
2010-10-24KVM: ia64: define kvm_lapic_enabled() to fix a compile errorTakuya Yoshikawa1-0/+1
The following patch commit 57ce1659316f4ca298919649f9b1b55862ac3826 KVM: x86: In DM_LOWEST, only deliver interrupts to vcpus with enabled LAPIC's ignored the fact that kvm_irq_delivery_to_apic() was also used by ia64. We define kvm_lapic_enabled() to fix a compile error caused by this. This will have the same effect as reverting the problematic patch for ia64. Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds2-99/+2
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (49 commits) serial8250: ratelimit "too much work" error serial: bfin_sport_uart: speed up sport RX sample rate to be 3% faster serial: abstraction for 8250 legacy ports serial/imx: check that the buffer is non-empty before sending it out serial: mfd: add more baud rates support jsm: Remove the uart port on errors Alchemy: Add UART PM methods. 8250: allow platforms to override PM hook. altera_uart: Don't use plain integer as NULL pointer altera_uart: Fix missing prototype for registering an early console altera_uart: Fixup type usage of port flags altera_uart: Make it possible to use Altera UART and 8250 ports together altera_uart: Add support for different address strides altera_uart: Add support for getting mapbase and IRQ from resources altera_uart: Add support for polling mode (IRQ-less) serial: Factor out uart_poll_timeout() from 8250 driver serial: mark the 8250 driver as maintained serial: 8250: Don't delay after transmitter is ready. tty: MAINTAINERS: add drivers/serial/jsm/ as maintained driver vcs: invoke the vt update callback when /dev/vcs* is written to ...
2010-10-22Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bklLinus Torvalds2-0/+3
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: vfs: make no_llseek the default vfs: don't use BKL in default_llseek llseek: automatically add .llseek fop libfs: use generic_file_llseek for simple_attr mac80211: disallow seeks in minstrel debug code lirc: make chardev nonseekable viotape: use noop_llseek raw: use explicit llseek file operations ibmasmfs: use generic_file_llseek spufs: use llseek in all file operations arm/omap: use generic_file_llseek in iommu_debug lkdtm: use generic_file_llseek in debugfs net/wireless: use generic_file_llseek in debugfs drm: use noop_llseek
2010-10-22tty: icount changeover for other main devicesAlan Cox1-11/+1
Again basically cut and paste Convert the main driver set to use the hooks for GICOUNT Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22ioctl: Use asm-generic/ioctls.h on ia64 (enables termiox)Jeff Mahoney1-88/+1
This patch converts ia64 to use asm-generic/ioctls.h instead of its own version. The differences between the arch-specific version and the generic version are as follows: - The generic version adds TIOCSRS485 and TIOCGRS485, which are unused by any driver available on this architecture. - The generic version adds support for termiox Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-irqflagsLinus Torvalds2-76/+94
* git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-irqflags: Fix IRQ flag handling naming MIPS: Add missing #inclusions of <linux/irq.h> smc91x: Add missing #inclusion of <linux/irq.h> Drop a couple of unnecessary asm/system.h inclusions SH: Add missing consts to sys_execve() declaration Blackfin: Rename IRQ flags handling functions Blackfin: Add missing dep to asm/irqflags.h Blackfin: Rename DES PC2() symbol to avoid collision Blackfin: Split the BF532 BFIN_*_FIO_FLAG() functions to their own header Blackfin: Split PLL code from mach-specific cdef headers
2010-10-21Merge branch 'release' of ↵Linus Torvalds14-300/+113
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Cannot use register_percpu_irq() from ia64_mca_init() [IA64] Initialize interrupts later (from init_IRQ()) [IA64] enable ARCH_DMA_ADDR_T_64BIT [IA64] ioc3_serial: release resources in error return path [IA64] Stop using the deprecated __do_IRQ() code path [IA64] Remove unnecessary casts of private_data in perfmon.c [IA64] Fix missing iounmap in error path in cyclone.c [IA64] salinfo: sema_init instead of init_MUTEX [IA64] xen: use ARRAY_SIZE macro in xen_pv_ops.c [IA64] Use static const char * const in palinfo.c [IA64] remove asm/compat.h [IA64] Add CONFIG_STACKTRACE_SUPPORT [IA64] Move local_softirq_pending() definition [IA64] iommu: Add a dummy iommu_table.h file in IA64. [IA64] unwind - optimise linked-list searches for modules [IA64] unwind: remove preprocesser noise, and correct comment
2010-10-21Merge branch 'x86-iommu-for-linus' of ↵Linus Torvalds1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, iommu: Update header comments with appropriate naming ia64, iommu: Add a dummy iommu_table.h file in IA64. x86, iommu: Fix IOMMU_INIT alignment rules x86, doc: Adding comments about .iommu_table and its neighbors. x86, iommu: Utilize the IOMMU_INIT macros functionality. x86, VT-d: Make Intel VT-d IOMMU use IOMMU_INIT_* macros. x86, GART/AMD-VI: Make AMD GART and IOMMU use IOMMU_INIT_* macros. x86, calgary: Make Calgary IOMMU use IOMMU_INIT_* macros. x86, xen-swiotlb: Make Xen-SWIOTLB use IOMMU_INIT_* macros. x86, swiotlb: Make SWIOTLB use IOMMU_INIT_* macros. x86, swiotlb: Simplify SWIOTLB pci_swiotlb_detect routine. x86, iommu: Add proper dependency sort routine (and sanity check). x86, iommu: Make all IOMMU's detection routines return a value. x86, iommu: Add IOMMU_INIT macros, .iommu_table section, and iommu_table_entry structure
2010-10-21Merge branch 'irq-core-for-linus' of ↵Linus Torvalds2-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (96 commits) apic, x86: Use BIOS settings for IBS and MCE threshold interrupt LVT offsets apic, x86: Check if EILVT APIC registers are available (AMD only) x86: ioapic: Call free_irte only if interrupt remapping enabled arm: Use ARCH_IRQ_INIT_FLAGS genirq, ARM: Fix boot on ARM platforms genirq: Fix CONFIG_GENIRQ_NO_DEPRECATED=y build x86: Switch sparse_irq allocations to GFP_KERNEL genirq: Switch sparse_irq allocator to GFP_KERNEL genirq: Make sparse_lock a mutex x86: lguest: Use new irq allocator genirq: Remove the now unused sparse irq leftovers genirq: Sanitize dynamic irq handling genirq: Remove arch_init_chip_data() x86: xen: Sanitise sparse_irq handling x86: Use sane enumeration x86: uv: Clean up the direct access to irq_desc x86: Make io_apic.c local functions static genirq: Remove irq_2_iommu x86: Speed up the irq_remapped check in hot pathes intr_remap: Simplify the code further ... Fix up trivial conflicts in arch/x86/Kconfig
2010-10-21Merge branch 'sched-core-for-linus' of ↵Linus Torvalds1-4/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (29 commits) sched: Export account_system_vtime() sched: Call tick_check_idle before __irq_enter sched: Remove irq time from available CPU power sched: Do not account irq time to current task x86: Add IRQ_TIME_ACCOUNTING sched: Add IRQ_TIME_ACCOUNTING, finer accounting of irq time sched: Add a PF flag for ksoftirqd identification sched: Consolidate account_system_vtime extern declaration sched: Fix softirq time accounting sched: Drop group_capacity to 1 only if local group has extra capacity sched: Force balancing on newidle balance if local group has capacity sched: Set group_imb only a task can be pulled from the busiest cpu sched: Do not consider SCHED_IDLE tasks to be cache hot sched: Drop all load weight manipulation for RT tasks sched: Create special class for stop/migrate work sched: Unindent labels sched: Comment updates: fix default latency and granularity numbers tracing/sched: Add sched_pi_setprio tracepoint sched: Give CPU bound RT tasks preference sched: Try not to migrate higher priority RT tasks ...
2010-10-19[IA64] Move local_softirq_pending() definitionTony Luck1-6/+5
Ugly #include dependencies. We need to have local_softirq_pending() defined before it gets used in <linux/interrupt.h>. But <asm/hardirq.h> provides the definition *after* this #include chain: <linux/irq.h> <asm/irq.h> <asm/hw_irq.h> <linux/interrupt.h> Signed-off-by: Tony Luck <tony.luck@intel.com> [ cherry-picked from the ia64 tree to fix "2bf2160: irq: Add tracepoint to softirq_raise" ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-18sched: Consolidate account_system_vtime extern declarationVenkatesh Pallipadi1-4/+0
Just a minor cleanup patch that makes things easier to the following patches. No functionality change in this patch. Signed-off-by: Venkatesh Pallipadi <venki@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1286237003-12406-3-git-send-email-venki@google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-15llseek: automatically add .llseek fopArnd Bergmann2-0/+3
All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-10-12Merge branches 'release', 'drop_do_IRQ', 'fix_early_irq', 'misc-2.6.37', ↵Tony Luck16-300/+111
'next-fixes', 'optimize-unwind', 'remove-compat-h' and 'stack_trace' into release
2010-10-12dmar: Convert to new irq chip functionsThomas Gleixner1-2/+2
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <dwmw2@infradead.org>
2010-10-12pci: Convert msi to new irq_chip functionsThomas Gleixner2-4/+4
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Tony Luck <tony.luck@intel.com> Cc: Russell King <linux@arm.linux.org.uk>
2010-10-08ia64, iommu: Add a dummy iommu_table.h file in IA64.Konrad Rzeszutek Wilk1-0/+6
We don't need a complex IOMMU dependency list on IA64 so we just define the IOMMU_* macro which is used the DMAR driver, as a dummy. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> LKML-Reference: <1286564028-2352-2-git-send-email-konrad.wilk@oracle.com> Reported-by: Tony Luck <tony.luck@intel.com> Tested-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-10-07[IA64] Cannot use register_percpu_irq() from ia64_mca_init()Tony Luck1-19/+19
This is called before early_irq_init() which will clobber any registrations made too early. Move the calls to ia64_mca_late_init(). Signed-off-by: Tony Luck <tomy.luck@intel.com>
2010-10-07Fix IRQ flag handling namingDavid Howells2-76/+94
Fix the IRQ flag handling naming. In linux/irqflags.h under one configuration, it maps: local_irq_enable() -> raw_local_irq_enable() local_irq_disable() -> raw_local_irq_disable() local_irq_save() -> raw_local_irq_save() ... and under the other configuration, it maps: raw_local_irq_enable() -> local_irq_enable() raw_local_irq_disable() -> local_irq_disable() raw_local_irq_save() -> local_irq_save() ... This is quite confusing. There should be one set of names expected of the arch, and this should be wrapped to give another set of names that are expected by users of this facility. Change this to have the arch provide: flags = arch_local_save_flags() flags = arch_local_irq_save() arch_local_irq_restore(flags) arch_local_irq_disable() arch_local_irq_enable() arch_irqs_disabled_flags(flags) arch_irqs_disabled() arch_safe_halt() Then linux/irqflags.h wraps these to provide: raw_local_save_flags(flags) raw_local_irq_save(flags) raw_local_irq_restore(flags) raw_local_irq_disable() raw_local_irq_enable() raw_irqs_disabled_flags(flags) raw_irqs_disabled() raw_safe_halt() with type checking on the flags 'arguments', and then wraps those to provide: local_save_flags(flags) local_irq_save(flags) local_irq_restore(flags) local_irq_disable() local_irq_enable() irqs_disabled_flags(flags) irqs_disabled() safe_halt() with tracing included if enabled. The arch functions can now all be inline functions rather than some of them having to be macros. Signed-off-by: David Howells <dhowells@redhat.com> [X86, FRV, MN10300] Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [Tile] Signed-off-by: Michal Simek <monstr@monstr.eu> [Microblaze] Tested-by: Catalin Marinas <catalin.marinas@arm.com> [ARM] Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [AVR] Acked-by: Tony Luck <tony.luck@intel.com> [IA-64] Acked-by: Hirokazu Takata <takata@linux-m32r.org> [M32R] Acked-by: Greg Ungerer <gerg@uclinux.org> [M68K/M68KNOMMU] Acked-by: Ralf Baechle <ralf@linux-mips.org> [MIPS] Acked-by: Kyle McMartin <kyle@mcmartin.ca> [PA-RISC] Acked-by: Paul Mackerras <paulus@samba.org> [PowerPC] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [S390] Acked-by: Chen Liqin <liqin.chen@sunplusct.com> [Score] Acked-by: Matt Fleming <matt@console-pimps.org> [SH] Acked-by: David S. Miller <davem@davemloft.net> [Sparc] Acked-by: Chris Zankel <chris@zankel.net> [Xtensa] Reviewed-by: Richard Henderson <rth@twiddle.net> [Alpha] Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> [H8300] Cc: starvik@axis.com [CRIS] Cc: jesper.nilsson@axis.com [CRIS] Cc: linux-cris-kernel@axis.com
2010-10-05[IA64] Initialize interrupts later (from init_IRQ())Tony Luck3-51/+5
Thomas Gleixner is cleaning up the generic irq code, and ia64 ran into problems because it calls register_intr() before early_irq_init() is called. Move the call to acpi_boot_init() from setup_arch() to init_IRQ(). As a bonus - moving the call later means we no longer need the hacks in iosapic.c to switch between the bootmem and regular allocator - we can just used kzalloc() for allocation. Signed-off-by: Tony Luck <tony.luck@intel.com>
2010-10-01[IA64] enable ARCH_DMA_ADDR_T_64BITFUJITA Tomonori1-0/+3
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2010-09-27[IA64] Stop using the deprecated __do_IRQ() code pathTony Luck3-6/+13
Thomas Gleixner <tglx@linutronix.de> wrote: >__do_IRQ() has been deprecated after a two years migration phase in >commit 0e57aa1. Since then another 18 months have gone by ... Mostly trivial stuff for this. The only tricky part was realizing that the new handler_*_irq() paths do not use desc->chip->end(irq). Not a problem for the edge case as the ia64 iosapic routine for that was nop(). But the "level" case handled interrupt migration there. Just use a slightly modified version of the "end" routine as "unmask" for the level triggered case. Signed-off-by: Tony Luck <tony.luck@intel.com>
2010-09-23[IA64] Remove unnecessary casts of private_data in perfmon.cJoe Perches1-6/+6
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2010-09-23[IA64] Fix missing iounmap in error path in cyclone.cJulia Lawall1-1/+1
By moving the iounmap up above the test, it takes place whether the test succeeds or fails. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Tony Luck <tony.luck@intel.com>
2010-09-23[IA64] salinfo: sema_init instead of init_MUTEXThomas Gleixner1-1/+1
Get rid of init_MUTEX[_LOCKED]() and use sema_init() instead. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Tony Luck <tony.luck@intel.com>
2010-09-23[IA64] xen: use ARRAY_SIZE macro in xen_pv_ops.cNikitas Angelinas1-3/+2
Replace sizeof(xen_branch_target) / sizeof(xen_branch_target[0]) with ARRAY_SIZE(xen_branch_target) in arch/ia64/xen/xen_pv_ops.c Signed-off-by: Nikitas Angelinas <nikitasangelinas@gmail.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2010-09-23[IA64] Use static const char * const in palinfo.cJoe Perches1-1/+1
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2010-09-23[IA64] remove asm/compat.hTony Luck1-208/+0
Missed this file in commit 32974ad4907cdde6c9de612cd1b2ee0568fb9409 [IA64] Remove COMPAT_IA32 support It is no longer needed, so remove it. Signed-off-by: Tony Luck <tony.luck@intel.com>
2010-09-23[IA64] Add CONFIG_STACKTRACE_SUPPORTTony Luck3-0/+43
Several Linux features are dependent on stack trace support. Add it so they can be enabled. Signed-off-by: Tony Luck <tony.luck@intel.com>
2010-09-20[IA64] Move local_softirq_pending() definitionTony Luck1-6/+5
Ugly #include dependencies. We need to have local_softirq_pending() defined before it gets used in <linux/interrupt.h>. But <asm/hardirq.h> provides the definition *after* this #include chain: <linux/irq.h> <asm/irq.h> <asm/hw_irq.h> <linux/interrupt.h> Signed-off-by: Tony Luck <tony.luck@intel.com>
2010-09-20[IA64] iommu: Add a dummy iommu_table.h file in IA64.Konrad Rzeszutek Wilk1-0/+6
We don't need a comlex IOMMU dependency list on IA64 so we just define the IOMMU_* macro as a dummy. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2010-09-16Merge branch 'release' of ↵Linus Torvalds1-31/+11
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Optimize ticket spinlocks in fsys_rt_sigprocmask
2010-09-15[IA64] Optimize ticket spinlocks in fsys_rt_sigprocmaskPetr Tesarik1-31/+11
Tony's fix (f574c843191728d9407b766a027f779dcd27b272) has a small bug, it incorrectly uses "r3" as a scratch register in the first of the two unlock paths ... it is also inefficient. Optimize the fast path again. Signed-off-by: Petr Tesarik <ptesarik@suse.cz> Signed-off-by: Tony Luck <tony.luck@intel.com>
2010-09-14compat: Make compat_alloc_user_space() incorporate the access_ok()H. Peter Anvin1-1/+1
compat_alloc_user_space() expects the caller to independently call access_ok() to verify the returned area. A missing call could introduce problems on some architectures. This patch incorporates the access_ok() check into compat_alloc_user_space() and also adds a sanity check on the length. The existing compat_alloc_user_space() implementations are renamed arch_compat_alloc_user_space() and are used as part of the implementation of the new global function. This patch assumes NULL will cause __get_user()/__put_user() to either fail or access userspace on all architectures. This should be followed by checking the return value of compat_access_user_space() for NULL in the callers, at which time the access_ok() in the callers can also be removed. Reported-by: Ben Hawkes <hawkes@sota.gen.nz> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Tony Luck <tony.luck@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: James Bottomley <jejb@parisc-linux.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: <stable@kernel.org>
2010-09-14[IA64] unwind - optimise linked-list searches for modulesPhil Carmody1-1/+16
It's clear from the comment in the code about keeping the kernel's unwind table at the front of the list that some attention has been paid to access patterns. Tests on other architectures have shown that a move-to-front optimisation improves searches dramatically. Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2010-09-14[IA64] unwind: remove preprocesser noise, and correct commentPhil Carmody1-3/+3
The expression in the comment was mis-bracketted. There was also no need to introduce a coding-style breaking macro for a single use, so just made it a static const. Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2010-09-09[IA64] fix siglockTony Luck1-7/+39
When ia64 converted to using ticket locks, an inline implementation of trylock/unlock in fsys.S was missed. This was not noticed because in most circumstances it simply resulted in using the slow path because the siglock was apparently not available (under old spinlock rules). Problems occur when the ticket spinlock has value 0x0 (when first initialised, or when it wraps around). At this point the fsys.S code acquires the lock (changing the 0x0 to 0x1. If another process attempts to get the lock at this point, it will change the value from 0x1 to 0x2 (using new ticket lock rules). Then the fsys.S code will free the lock using old spinlock rules by writing 0x0 to it. From here a variety of bad things can happen. Signed-off-by: Tony Luck <tony.luck@intel.com>
2010-08-28Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: pxa27x_keypad - remove input_free_device() in pxa27x_keypad_remove() Input: mousedev - fix regression of inverting axes Input: uinput - add devname alias to allow module on-demand load Input: hil_kbd - fix compile error USB: drop tty argument from usb_serial_handle_sysrq_char() Input: sysrq - drop tty argument form handle_sysrq() Input: sysrq - drop tty argument from sysrq ops handlers
2010-08-21Input: sysrq - drop tty argument form handle_sysrq()Dmitry Torokhov1-1/+1
Sysrq operations do not accept tty argument anymore so no need to pass it to us. [Stephen Rothwell <sfr@canb.auug.org.au>: fix build breakage in drm code caused by sysrq using bool but not including linux/types.h] [Sachin Sant <sachinp@in.ibm.com>: fix build breakage in s390 keyboadr driver] Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-08-18[IA64] Fix build error: conflicting types for ‘sys_execve’Tony Luck1-2/+0
arch/ia64/kernel/process.c:636: error: conflicting types for ‘sys_execve’ commit d7627467b7a8dd6944885290a03a07ceb28c10eb Make do_execve() take a const filename pointer Missed the declaration of sys_execve in the ia64 asm/unistd.h (perhaps because there is no reason for it to be there ... it might be a left over from the COMPAT code?). Just delete the conflicting version. Signed-off-by: Tony Luck <tony.luck@intel.com>
2010-08-17Make do_execve() take a const filename pointerDavid Howells1-1/+3
Make do_execve() take a const filename pointer so that kernel_execve() compiles correctly on ARM: arch/arm/kernel/sys_arm.c:88: warning: passing argument 1 of 'do_execve' discards qualifiers from pointer target type This also requires the argv and envp arguments to be consted twice, once for the pointer array and once for the strings the array points to. This is because do_execve() passes a pointer to the filename (now const) to copy_strings_kernel(). A simpler alternative would be to cast the filename pointer in do_execve() when it's passed to copy_strings_kernel(). do_execve() may not change any of the strings it is passed as part of the argv or envp lists as they are some of them in .rodata, so marking these strings as const should be fine. Further kernel_execve() and sys_execve() need to be changed to match. This has been test built on x86_64, frv, arm and mips. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-14defconfig reductionSam Ravnborg7-858/+851
Use the defconfig files generated by "make savedefconfig" for remaining defconfig files. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2010-08-14archs: replace unifdef-y with header-ySam Ravnborg1-5/+4
unifdef-y and header-y have same semantic, so drop unifdef-y Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2010-08-13Merge branch 'release' of ↵Linus Torvalds3-5/+11
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Add latest crop of syscalls [IA64] Fix 64-bit atomic routines to return "long"
2010-08-13[IA64] Add latest crop of syscallsTony Luck2-1/+7
Three new syscalls for 2.6.36: prlimit64, fanotify_init and fanotify_mark. Wire up the ia64 syscall table for them. Signed-off-by: Tony Luck <tony.luck@intel.com>
2010-08-13Mark arguments to certain syscalls as being constDavid Howells2-2/+2
Mark arguments to certain system calls as being const where they should be but aren't. The list includes: (*) The filename arguments of various stat syscalls, execve(), various utimes syscalls and some mount syscalls. (*) The filename arguments of some syscall helpers relating to the above. (*) The buffer argument of various write syscalls. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-13[IA64] Fix 64-bit atomic routines to return "long"Tony Luck1-4/+4
These have been broken (returning "int") since the dawn of time. But there were no users that needed the whole value until commit 424acaaeb3a3932d64a9b4bd59df6cf72c22d8f3 rwsem: wake queued readers when writer blocks on active read lock made this change: - (rwsem_atomic_update(0, sem) & RWSEM_ACTIVE_MASK)) - /* Someone grabbed the sem already */ + rwsem_atomic_update(0, sem) < RWSEM_WAITING_BIAS) + /* Someone grabbed the sem for write already */ RWSEM_ACTIVE_MASK is 0xffffffffL, so the old code only looked at the low order 32-bits. The new code needs to see all 64 bits. Signed-off-by: Tony Luck <tony.luck@intel.com>
2010-08-12[IA64] Fix rwsem: RWSEM_WAITING_BIAS must not be unsigned.Tony Luck1-3/+3
Some nice improvements were made to rwsem in commit: 424acaaeb3a3932d64a9b4bd59df6cf72c22d8f3 rwsem: wake queued readers when writer blocks on active read lock but this change overlooked that ia64 had defined RWSEM_WAITING_BIAS as an unsigned value, while the new code required a signed value (as it is in every other architecture). This fix suggested by the original patch author: Michel Lespinasse. Signed-off-by: Tony Luck <tony.luck@intel.com>
2010-08-11Merge branch 'for-linus' of ↵Linus Torvalds1-7/+8
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: isofs: Fix lseek() to position beyond 4 GB vfs: remove unused MNT_STRICTATIME vfs: show unreachable paths in getcwd and proc vfs: only add " (deleted)" where necessary vfs: add prepend_path() helper vfs: __d_path: dont prepend the name of the root dentry ia64: perfmon: add d_dname method vfs: add helpers to get root and pwd cachefiles: use path_get instead of lone dget fs/sysv/super.c: add support for non-PDP11 v7 filesystems V7: Adjust sanity checks for some volumes Add v7 alias v9fs: fixup for inode_setattr being removed Manual merge to take Al's version of the fs/sysv/super.c file: it merged cleanly, but Al had removed an unnecessary header include, so his side was better.
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 18:02:48 +0000