summaryrefslogtreecommitdiffstats
path: root/arch/ia64
AgeCommit message (Collapse)AuthorFilesLines
2014-10-08Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-35/+14
Pull KVM updates from Paolo Bonzini: "Fixes and features for 3.18. Apart from the usual cleanups, here is the summary of new features: - s390 moves closer towards host large page support - PowerPC has improved support for debugging (both inside the guest and via gdbstub) and support for e6500 processors - ARM/ARM64 support read-only memory (which is necessary to put firmware in emulated NOR flash) - x86 has the usual emulator fixes and nested virtualization improvements (including improved Windows support on Intel and Jailhouse hypervisor support on AMD), adaptive PLE which helps overcommitting of huge guests. Also included are some patches that make KVM more friendly to memory hot-unplug, and fixes for rare caching bugs. Two patches have trivial mm/ parts that were acked by Rik and Andrew. Note: I will soon switch to a subkey for signing purposes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (157 commits) kvm: do not handle APIC access page if in-kernel irqchip is not in use KVM: s390: count vcpu wakeups in stat.halt_wakeup KVM: s390/facilities: allow TOD-CLOCK steering facility bit KVM: PPC: BOOK3S: HV: CMA: Reserve cma region only in hypervisor mode arm/arm64: KVM: Report correct FSC for unsupported fault types arm/arm64: KVM: Fix VTTBR_BADDR_MASK and pgd alloc kvm: Fix kvm_get_page_retry_io __gup retval check arm/arm64: KVM: Fix set_clear_sgi_pend_reg offset kvm: x86: Unpin and remove kvm_arch->apic_access_page kvm: vmx: Implement set_apic_access_page_addr kvm: x86: Add request bit to reload APIC access page address kvm: Add arch specific mmu notifier for page invalidation kvm: Rename make_all_cpus_request() to kvm_make_all_cpus_request() and make it non-static kvm: Fix page ageing bugs kvm/x86/mmu: Pass gfn and level to rmapp callback. x86: kvm: use alternatives for VMCALL vs. VMMCALL if kernel text is read-only kvm: x86: use macros to compute bank MSRs KVM: x86: Remove debug assertion of non-PAE reserved bits kvm: don't take vcpu mutex for obviously invalid vcpu ioctls kvm: Faults which trigger IO release the mmap_sem ...
2014-09-23[IA64] refresh arch/ia64/configs/* using "make savedefconfig"Tony Luck6-83/+29
Prompted by a change to drivers/scsi/Kconfig which used to do a "select NET" but now does a "depends on NET". This meant that some configurations ended up without CONFIG_NET=y Signed-off-by Tony Luck <tony.luck@intel.com>
2014-09-19Merge tag 'pci-v3.17-fixes-2' of ↵Linus Torvalds1-23/+1
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "These fix: - Boot video device detection on dual-GPU Apple systems - Hotplug fiascos on VGA switcheroo with radeon & nouveau drivers - Boot hang on Freescale i.MX6 systems - Excessive "no hotplug settings from platform" warnings In particular: Enumeration - Don't default exclusively to first video device (Bruno Prémont) PCI device hotplug - Remove "no hotplug settings from platform" warning (Bjorn Helgaas) - Add pci_ignore_hotplug() for VGA switcheroo (Bjorn Helgaas) Freescale i.MX6 - Put LTSSM in "Detect" state before disabling (Lucas Stach)" * tag 'pci-v3.17-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: vgaarb: Drop obsolete #ifndef vgaarb: Don't default exclusively to first video device with mem+io ACPIPHP / radeon / nouveau: Remove acpi_bus_no_hotplug() PCI: Remove "no hotplug settings from platform" warning PCI: Add pci_ignore_hotplug() to ignore hotplug events for a device PCI: imx6: Put LTSSM in "Detect" state before disabling it MAINTAINERS: Add Lucas Stach as co-maintainer for i.MX6 PCI driver
2014-09-16vgaarb: Don't default exclusively to first video device with mem+ioBruno Prémont1-23/+1
Commit 20cde694027e ("x86, ia64: Move EFI_FB vga_default_device() initialization to pci_vga_fixup()") moved boot video device detection from efifb to x86 and ia64 pci/fixup.c. For dual-GPU Apple computers above change represents a regression as code in efifb did forcefully override vga_default_device while the merge did not (vgaarb happens prior to PCI fixup). To improve on initial device selection by vgaarb (it cannot know if PCI device not behind bridges see/decode legacy VGA I/O or not), move the screen_info based check from pci_video_fixup() to vgaarb's init function and use it to refine/override decision taken while adding the individual PCI VGA devices. This way PCI fixup has no reason to adjust vga_default_device anymore but can depend on its value for flagging shadowed VBIOS. This has the nice benefit of removing duplicated code but does introduce a #if defined() block in vgaarb. Not all architectures have screen_info and would cause compile to fail without it. Link: https://bugzilla.kernel.org/show_bug.cgi?id=84461 Reported-and-Tested-By: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Matthew Garrett <matthew.garrett@nebula.com> CC: stable@vger.kernel.org # v3.5+
2014-09-15ia64: Fix syscall number for memfd_createTony Luck1-1/+1
Cut & paste typo from the line above. Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-29kexec: remove CONFIG_KEXEC dependency on cryptoVivek Goyal1-2/+0
New system call depends on crypto. As it did not have a separate config option, CONFIG_KEXEC was modified to select CRYPTO and CRYPTO_SHA256. But now previous patch introduced a new config option for new syscall. So CONFIG_KEXEC does not require crypto. Remove that dependency. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Shaun Ruffell <sruffell@digium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-29KVM: remove garbage arg to *hardware_{en,dis}ableRadim Krčmář1-2/+2
In the beggining was on_each_cpu(), which required an unused argument to kvm_arch_ops.hardware_{en,dis}able, but this was soon forgotten. Remove unnecessary arguments that stem from this. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-29KVM: static inline empty kvm_arch functionsRadim Krčmář2-30/+12
Using static inline is going to save few bytes and cycles. For example on powerpc, the difference is 700 B after stripping. (5 kB before) This patch also deals with two overlooked empty functions: kvm_arch_flush_shadow was not removed from arch/mips/kvm/mips.c 2df72e9bc KVM: split kvm_arch_flush_shadow and kvm_arch_sched_in never made it into arch/ia64/kvm/kvm-ia64.c. e790d9ef6 KVM: add kvm_arch_sched_in Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-29KVM: forward declare structs in kvm_types.hPaolo Bonzini1-3/+0
Opaque KVM structs are useful for prototypes in asm/kvm_host.h, to avoid "'struct foo' declared inside parameter list" warnings (and consequent breakage due to conflicting types). Move them from individual files to a generic place in linux/kvm_types.h. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-18[IA64] Wire up memfd_create() system callTony Luck3-1/+3
Yet another system call. This one added by: commit 9183df25fe7b194563db3fec6dc3202a5855839c shm: add memfd_create() syscall Signed-off-by: Tony Luck <tony.luck@intel.com>
2014-08-14Merge branch 'kbuild' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild updates from Michal Marek: - make clean also considers $(extra-m) and $(extra-) to be consistent - cleanup and fixes in scripts/Makefile.host - allow to override the name of the Python 2 executable with make PYTHON=... (only needed for ia64 in practice) - option to split debugingo into *.dwo files to save disk space if the compiler supports it (CONFIG_DEBUG_INFO_SPLIT) - option to use dwarf4 debuginfo if the compiler supports it (CONFIG_DEBUG_INFO_DWARF4) - fix for disabling certain warnings with clang - fix for unneeded rebuild with dash when a command contains backslashes * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kbuild: Fix handling of backslashes in *.cmd files kbuild, LLVMLinux: Supress warnings unless W=1-3 Kbuild: Add a option to enable dwarf4 v2 kbuild: Support split debug info v4 kbuild: allow to override Python command name kbuild: clean-up and bug fix of scripts/Makefile.host kbuild: clean up scripts/Makefile.host kbuild: drop shared library support from Makefile.host kbuild: fix a bug of C++ host program handling kbuild: fix a typo in scripts/Makefile.host scripts/Makefile.clean: clean also $(extra-m) and $(extra-)
2014-08-09Merge branch 'signal-cleanup' of ↵Linus Torvalds1-25/+21
git://git.kernel.org/pub/scm/linux/kernel/git/rw/misc Pull arch signal handling cleanup from Richard Weinberger: "This patch series moves all remaining archs to the get_signal(), signal_setup_done() and sigsp() functions. Currently these archs use open coded variants of the said functions. Further, unused parameters get removed from get_signal_to_deliver(), tracehook_signal_handler() and signal_delivered(). At the end of the day we save around 500 lines of code." * 'signal-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/misc: (43 commits) powerpc: Use sigsp() openrisc: Use sigsp() mn10300: Use sigsp() mips: Use sigsp() microblaze: Use sigsp() metag: Use sigsp() m68k: Use sigsp() m32r: Use sigsp() hexagon: Use sigsp() frv: Use sigsp() cris: Use sigsp() c6x: Use sigsp() blackfin: Use sigsp() avr32: Use sigsp() arm64: Use sigsp() arc: Use sigsp() sas_ss_flags: Remove nested ternary if Rip out get_signal_to_deliver() Clean up signal_delivered() tracehook_signal_handler: Remove sig, info, ka and regs ...
2014-08-09Merge tag 'please-pull-getrandom' of ↵Linus Torvalds3-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull ia64 system call update from Tony Luck: "Wire up getrandom system call for ia64" * tag 'please-pull-getrandom' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: [IA64] Wire up getrandom() system call
2014-08-08Merge branch 'akpm' (second patchbomb from Andrew Morton)Linus Torvalds6-22/+37
Merge more incoming from Andrew Morton: "Two new syscalls: memfd_create in "shm: add memfd_create() syscall" kexec_file_load in "kexec: implementation of new syscall kexec_file_load" And: - Most (all?) of the rest of MM - Lots of the usual misc bits - fs/autofs4 - drivers/rtc - fs/nilfs - procfs - fork.c, exec.c - more in lib/ - rapidio - Janitorial work in filesystems: fs/ufs, fs/reiserfs, fs/adfs, fs/cramfs, fs/romfs, fs/qnx6. - initrd/initramfs work - "file sealing" and the memfd_create() syscall, in tmpfs - add pci_zalloc_consistent, use it in lots of places - MAINTAINERS maintenance - kexec feature work" * emailed patches from Andrew Morton <akpm@linux-foundation.org: (193 commits) MAINTAINERS: update nomadik patterns MAINTAINERS: update usb/gadget patterns MAINTAINERS: update DMA BUFFER SHARING patterns kexec: verify the signature of signed PE bzImage kexec: support kexec/kdump on EFI systems kexec: support for kexec on panic using new system call kexec-bzImage64: support for loading bzImage using 64bit entry kexec: load and relocate purgatory at kernel load time purgatory: core purgatory functionality purgatory/sha256: provide implementation of sha256 in purgaotory context kexec: implementation of new syscall kexec_file_load kexec: new syscall kexec_file_load() declaration kexec: make kexec_segment user buffer pointer a union resource: provide new functions to walk through resources kexec: use common function for kimage_normal_alloc() and kimage_crash_alloc() kexec: move segment verification code in a separate function kexec: rename unusebale_pages to unusable_pages kernel: build bin2c based on config option CONFIG_BUILD_BIN2C bin2c: move bin2c in scripts/basic shm: wait for pins to be released when sealing ...
2014-08-08kexec: load and relocate purgatory at kernel load timeVivek Goyal1-0/+2
Load purgatory code in RAM and relocate it based on the location. Relocation code has been inspired by module relocation code and purgatory relocation code in kexec-tools. Also compute the checksums of loaded kexec segments and store them in purgatory. Arch independent code provides this functionality so that arch dependent bootloaders can make use of it. Helper functions are provided to get/set symbol values in purgatory which are used by bootloaders later to set things like stack and entry point of second kernel etc. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Dave Young <dyoung@redhat.com> Cc: WANG Chao <chaowang@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08arm64,ia64,ppc,s390,sh,tile,um,x86,mm: remove default gate areaAndy Lutomirski2-0/+33
The core mm code will provide a default gate area based on FIXADDR_USER_START and FIXADDR_USER_END if !defined(__HAVE_ARCH_GATE_AREA) && defined(AT_SYSINFO_EHDR). This default is only useful for ia64. arm64, ppc, s390, sh, tile, 64-bit UML, and x86_32 have their own code just to disable it. arm, 32-bit UML, and x86_64 have gate areas, but they have their own implementations. This gets rid of the default and moves the code into ia64. This should save some code on architectures without a gate area: it's now possible to inline the gate_area functions in the default case. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Acked-by: Nathan Lynch <nathan_lynch@mentor.com> Acked-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [in principle] Acked-by: Richard Weinberger <richard@nod.at> [for um] Acked-by: Will Deacon <will.deacon@arm.com> [for arm64] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Nathan Lynch <Nathan_Lynch@mentor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08lib/scatterlist: make ARCH_HAS_SG_CHAIN an actual KconfigLaura Abbott3-7/+2
Rather than have architectures #define ARCH_HAS_SG_CHAIN in an architecture specific scatterlist.h, make it a proper Kconfig option and use that instead. At same time, remove the header files are are now mostly useless and just include asm-generic/scatterlist.h. [sfr@canb.auug.org.au: powerpc files now need asm/dma.h] Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> [x86] Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [powerpc] Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08rtc: ia64: allow other architectures to use EFI RTCMark Salter1-15/+0
Currently, the rtc-efi driver is restricted to ia64 only. Newer architectures with EFI support may want to also use that driver. This patch moves the platform device setup from ia64 into drivers/rtc and allow any architecture with CONFIG_EFI=y to use the rtc-efi driver. Signed-off-by: Mark Salter <msalter@redhat.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-1/+2
Pull second round of KVM changes from Paolo Bonzini: "Here are the PPC and ARM changes for KVM, which I separated because they had small conflicts (respectively within KVM documentation, and with 3.16-rc changes). Since they were all within the subsystem, I took care of them. Stephen Rothwell reported some snags in PPC builds, but they are all fixed now; the latest linux-next report was clean. New features for ARM include: - KVM VGIC v2 emulation on GICv3 hardware - Big-Endian support for arm/arm64 (guest and host) - Debug Architecture support for arm64 (arm32 is on Christoffer's todo list) And for PPC: - Book3S: Good number of LE host fixes, enable HV on LE - Book3S HV: Add in-guest debug support This release drops support for KVM on the PPC440. As a result, the PPC merge removes more lines than it adds. :) I also included an x86 change, since Davidlohr tied it to an independent bug report and the reporter quickly provided a Tested-by; there was no reason to wait for -rc2" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (122 commits) KVM: Move more code under CONFIG_HAVE_KVM_IRQFD KVM: nVMX: fix "acknowledge interrupt on exit" when APICv is in use KVM: nVMX: Fix nested vmexit ack intr before load vmcs01 KVM: PPC: Enable IRQFD support for the XICS interrupt controller KVM: Give IRQFD its own separate enabling Kconfig option KVM: Move irq notifier implementation into eventfd.c KVM: Move all accesses to kvm::irq_routing into irqchip.c KVM: irqchip: Provide and use accessors for irq routing table KVM: Don't keep reference to irq routing table in irqfd struct KVM: PPC: drop duplicate tracepoint arm64: KVM: fix 64bit CP15 VM access for 32bit guests KVM: arm64: GICv3: mandate page-aligned GICV region arm64: KVM: GICv3: move system register access to msr_s/mrs_s KVM: PPC: PR: Handle FSCR feature deselects KVM: PPC: HV: Remove generic instruction emulation KVM: PPC: BOOKEHV: rename e500hv_spr to bookehv_spr KVM: PPC: Remove DCR handling KVM: PPC: Expose helper functions for data/inst faults KVM: PPC: Separate loadstore emulation from priv emulation KVM: PPC: Handle magic page in kvmppc_ld/st ...
2014-08-06Merge branch 'akpm' (patchbomb from Andrew Morton)Linus Torvalds1-1/+2
Merge incoming from Andrew Morton: - Various misc things. - arch/sh updates. - Part of ocfs2. Review is slow. - Slab updates. - Most of -mm. - printk updates. - lib/ updates. - checkpatch updates. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (226 commits) checkpatch: update $declaration_macros, add uninitialized_var checkpatch: warn on missing spaces in broken up quoted checkpatch: fix false positives for --strict "space after cast" test checkpatch: fix false positive MISSING_BREAK warnings with --file checkpatch: add test for native c90 types in unusual order checkpatch: add signed generic types checkpatch: add short int to c variable types checkpatch: add for_each tests to indentation and brace tests checkpatch: fix brace style misuses of else and while checkpatch: add --fix option for a couple OPEN_BRACE misuses checkpatch: use the correct indentation for which() checkpatch: add fix_insert_line and fix_delete_line helpers checkpatch: add ability to insert and delete lines to patch/file checkpatch: add an index variable for fixed lines checkpatch: warn on break after goto or return with same tab indentation checkpatch: emit a warning on file add/move/delete checkpatch: add test for commit id formatting style in commit log checkpatch: emit fewer kmalloc_array/kcalloc conversion warnings checkpatch: improve "no space after cast" test checkpatch: allow multiple const * types ...
2014-08-06Merge tag 'pm+acpi-3.17-rc1' of ↵Linus Torvalds3-4/+6
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "Again, ACPICA leads the pack (47 commits), followed by cpufreq (18 commits) and system suspend/hibernation (9 commits). From the new code perspective, the ACPICA update brings ACPI 5.1 to the table, including a new device configuration object called _DSD (Device Specific Data) that will hopefully help us to operate device properties like Device Trees do (at least to some extent) and changes related to supporting ACPI on ARM. Apart from that we have hibernation changes making it use radix trees to store memory bitmaps which should speed up some operations carried out by it quite significantly. We also have some power management changes related to suspend-to-idle (the "freeze" sleep state) support and more preliminary changes needed to support ACPI on ARM (outside of ACPICA). The rest is fixes and cleanups pretty much everywhere. Specifics: - ACPICA update to upstream version 20140724. That includes ACPI 5.1 material (support for the _CCA and _DSD predefined names, changes related to the DMAR and PCCT tables and ARM support among other things) and cleanups related to using ACPICA's header files. A major part of it is related to acpidump and the core code used by that utility. Changes from Bob Moore, David E Box, Lv Zheng, Sascha Wildner, Tomasz Nowicki, Hanjun Guo. - Radix trees for memory bitmaps used by the hibernation core from Joerg Roedel. - Support for waking up the system from suspend-to-idle (also known as the "freeze" sleep state) using ACPI-based PCI wakeup signaling (Rafael J Wysocki). - Fixes for issues related to ACPI button events (Rafael J Wysocki). - New device ID for an ACPI-enumerated device included into the Wildcat Point PCH from Jie Yang. - ACPI video updates related to backlight handling from Hans de Goede and Linus Torvalds. - Preliminary changes needed to support ACPI on ARM from Hanjun Guo and Graeme Gregory. - ACPI PNP core cleanups from Arjun Sreedharan and Zhang Rui. - Cleanups related to ACPI_COMPANION() and ACPI_HANDLE() macros (Rafael J Wysocki). - ACPI-based device hotplug cleanups from Wei Yongjun and Rafael J Wysocki. - Cleanups and improvements related to system suspend from Lan Tianyu, Randy Dunlap and Rafael J Wysocki. - ACPI battery cleanup from Wei Yongjun. - cpufreq core fixes from Viresh Kumar. - Elimination of a deadband effect from the cpufreq ondemand governor and intel_pstate driver cleanups from Stratos Karafotis. - 350MHz CPU support for the powernow-k6 cpufreq driver from Mikulas Patocka. - Fix for the imx6 cpufreq driver from Anson Huang. - cpuidle core and governor cleanups from Daniel Lezcano, Sandeep Tripathy and Mohammad Merajul Islam Molla. - Build fix for the big_little cpuidle driver from Sachin Kamat. - Configuration fix for the Operation Performance Points (OPP) framework from Mark Brown. - APM cleanup from Jean Delvare. - cpupower utility fixes and cleanups from Peter Senna Tschudin, Andrey Utkin, Himangi Saraogi, Rickard Strandqvist, Thomas Renninger" * tag 'pm+acpi-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (118 commits) ACPI / LPSS: add LPSS device for Wildcat Point PCH ACPI / PNP: Replace faulty is_hex_digit() by isxdigit() ACPICA: Update version to 20140724. ACPICA: ACPI 5.1: Update for PCCT table changes. ACPICA/ARM: ACPI 5.1: Update for GTDT table changes. ACPICA/ARM: ACPI 5.1: Update for MADT changes. ACPICA/ARM: ACPI 5.1: Update for FADT changes. ACPICA: ACPI 5.1: Support for the _CCA predifined name. ACPICA: ACPI 5.1: New notify value for System Affinity Update. ACPICA: ACPI 5.1: Support for the _DSD predefined name. ACPICA: Debug object: Add current value of Timer() to debug line prefix. ACPICA: acpihelp: Add UUID support, restructure some existing files. ACPICA: Utilities: Fix local printf issue. ACPICA: Tables: Update for DMAR table changes. ACPICA: Remove some extraneous printf arguments. ACPICA: Update for comments/formatting. No functional changes. ACPICA: Disassembler: Add support for the ToUUID opererator (macro). ACPICA: Remove a redundant cast to acpi_size for ACPI_OFFSET() macro. ACPICA: Work around an ancient GCC bug. ACPI / processor: Make it possible to get local x2apic id via _MAT ...
2014-08-06memory-hotplug: ia64: suitable memory should go to ZONE_MOVABLEWang Nan1-1/+2
This patch introduces zone_for_memory() to arch_add_memory() on ia64 to ensure new, higher memory added into ZONE_MOVABLE if movable zone has already setup. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: "Mel Gorman" <mgorman@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06[IA64] Wire up getrandom() system callTony Luck3-1/+3
See commit c6e9d6f38894798696f23c8084ca7edbf16ee895 random: introduce getrandom(2) system call for all the details (and even a manual page!) Signed-off-by: Tony Luck <tony.luck@intel.com>
2014-08-06ia64: Use get_signal() signal_setup_done()Richard Weinberger1-25/+21
Use the more generic functions get_signal() signal_setup_done() for signal delivery. This inverts also the return codes of force_sigsegv_info() and setup_frame() to follow the kernel convention. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-08-05Merge branch 'timers-core-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer and time updates from Thomas Gleixner: "A rather large update of timers, timekeeping & co - Core timekeeping code is year-2038 safe now for 32bit machines. Now we just need to fix all in kernel users and the gazillion of user space interfaces which rely on timespec/timeval :) - Better cache layout for the timekeeping internal data structures. - Proper nanosecond based interfaces for in kernel users. - Tree wide cleanup of code which wants nanoseconds but does hoops and loops to convert back and forth from timespecs. Some of it definitely belongs into the ugly code museum. - Consolidation of the timekeeping interface zoo. - A fast NMI safe accessor to clock monotonic for tracing. This is a long standing request to support correlated user/kernel space traces. With proper NTP frequency correction it's also suitable for correlation of traces accross separate machines. - Checkpoint/restart support for timerfd. - A few NOHZ[_FULL] improvements in the [hr]timer code. - Code move from kernel to kernel/time of all time* related code. - New clocksource/event drivers from the ARM universe. I'm really impressed that despite an architected timer in the newer chips SoC manufacturers insist on inventing new and differently broken SoC specific timers. [ Ed. "Impressed"? I don't think that word means what you think it means ] - Another round of code move from arch to drivers. Looks like most of the legacy mess in ARM regarding timers is sorted out except for a few obnoxious strongholds. - The usual updates and fixlets all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits) timekeeping: Fixup typo in update_vsyscall_old definition clocksource: document some basic timekeeping concepts timekeeping: Use cached ntp_tick_length when accumulating error timekeeping: Rework frequency adjustments to work better w/ nohz timekeeping: Minor fixup for timespec64->timespec assignment ftrace: Provide trace clocks monotonic timekeeping: Provide fast and NMI safe access to CLOCK_MONOTONIC seqcount: Add raw_write_seqcount_latch() seqcount: Provide raw_read_seqcount() timekeeping: Use tk_read_base as argument for timekeeping_get_ns() timekeeping: Create struct tk_read_base and use it in struct timekeeper timekeeping: Restructure the timekeeper some more clocksource: Get rid of cycle_last clocksource: Move cycle_last validation to core code clocksource: Make delta calculation a function wireless: ath9k: Get rid of timespec conversions drm: vmwgfx: Use nsec based interfaces drm: i915: Use nsec based interfaces timekeeping: Provide ktime_get_raw() hangcheck-timer: Use ktime_get_ns() ...
2014-08-05KVM: Give IRQFD its own separate enabling Kconfig optionPaul Mackerras1-0/+1
Currently, the IRQFD code is conditional on CONFIG_HAVE_KVM_IRQ_ROUTING. So that we can have the IRQFD code compiled in without having the IRQ routing code, this creates a new CONFIG_HAVE_KVM_IRQFD, makes the IRQFD code conditional on it instead of CONFIG_HAVE_KVM_IRQ_ROUTING, and makes all the platforms that currently select HAVE_KVM_IRQ_ROUTING also select HAVE_KVM_IRQFD. Signed-off-by: Paul Mackerras <paulus@samba.org> Tested-by: Eric Auger <eric.auger@linaro.org> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-05Merge tag 'signed-kvm-ppc-next' of git://github.com/agraf/linux-2.6 into kvmPaolo Bonzini1-1/+1
Patch queue for ppc - 2014-08-01 Highlights in this release include: - BookE: Rework instruction fetch, not racy anymore now - BookE HV: Fix ONE_REG accessors for some in-hardware registers - Book3S: Good number of LE host fixes, enable HV on LE - Book3S: Some misc bug fixes - Book3S HV: Add in-guest debug support - Book3S HV: Preload cache lines on context switch - Remove 440 support Alexander Graf (31): KVM: PPC: Book3s PR: Disable AIL mode with OPAL KVM: PPC: Book3s HV: Fix tlbie compile error KVM: PPC: Book3S PR: Handle hyp doorbell exits KVM: PPC: Book3S PR: Fix ABIv2 on LE KVM: PPC: Book3S PR: Fix sparse endian checks PPC: Add asm helpers for BE 32bit load/store KVM: PPC: Book3S HV: Make HTAB code LE host aware KVM: PPC: Book3S HV: Access guest VPA in BE KVM: PPC: Book3S HV: Access host lppaca and shadow slb in BE KVM: PPC: Book3S HV: Access XICS in BE KVM: PPC: Book3S HV: Fix ABIv2 on LE KVM: PPC: Book3S HV: Enable for little endian hosts KVM: PPC: Book3S: Move vcore definition to end of kvm_arch struct KVM: PPC: Deflect page write faults properly in kvmppc_st KVM: PPC: Book3S: Stop PTE lookup on write errors KVM: PPC: Book3S: Add hack for split real mode KVM: PPC: Book3S: Make magic page properly 4k mappable KVM: PPC: Remove 440 support KVM: Rename and add argument to check_extension KVM: Allow KVM_CHECK_EXTENSION on the vm fd KVM: PPC: Book3S: Provide different CAPs based on HV or PR mode KVM: PPC: Implement kvmppc_xlate for all targets KVM: PPC: Move kvmppc_ld/st to common code KVM: PPC: Remove kvmppc_bad_hva() KVM: PPC: Use kvm_read_guest in kvmppc_ld KVM: PPC: Handle magic page in kvmppc_ld/st KVM: PPC: Separate loadstore emulation from priv emulation KVM: PPC: Expose helper functions for data/inst faults KVM: PPC: Remove DCR handling KVM: PPC: HV: Remove generic instruction emulation KVM: PPC: PR: Handle FSCR feature deselects Alexey Kardashevskiy (1): KVM: PPC: Book3S: Fix LPCR one_reg interface Aneesh Kumar K.V (4): KVM: PPC: BOOK3S: PR: Fix PURR and SPURR emulation KVM: PPC: BOOK3S: PR: Emulate virtual timebase register KVM: PPC: BOOK3S: PR: Emulate instruction counter KVM: PPC: BOOK3S: HV: Update compute_tlbie_rb to handle 16MB base page Anton Blanchard (2): KVM: PPC: Book3S HV: Fix ABIv2 indirect branch issue KVM: PPC: Assembly functions exported to modules need _GLOBAL_TOC() Bharat Bhushan (10): kvm: ppc: bookehv: Added wrapper macros for shadow registers kvm: ppc: booke: Use the shared struct helpers of SRR0 and SRR1 kvm: ppc: booke: Use the shared struct helpers of SPRN_DEAR kvm: ppc: booke: Add shared struct helpers of SPRN_ESR kvm: ppc: booke: Use the shared struct helpers for SPRN_SPRG0-7 kvm: ppc: Add SPRN_EPR get helper function kvm: ppc: bookehv: Save restore SPRN_SPRG9 on guest entry exit KVM: PPC: Booke-hv: Add one reg interface for SPRG9 KVM: PPC: Remove comment saying SPRG1 is used for vcpu pointer KVM: PPC: BOOKEHV: rename e500hv_spr to bookehv_spr Michael Neuling (1): KVM: PPC: Book3S HV: Add H_SET_MODE hcall handling Mihai Caraman (8): KVM: PPC: e500mc: Enhance tlb invalidation condition on vcpu schedule KVM: PPC: e500: Fix default tlb for victim hint KVM: PPC: e500: Emulate power management control SPR KVM: PPC: e500mc: Revert "add load inst fixup" KVM: PPC: Book3e: Add TLBSEL/TSIZE defines for MAS0/1 KVM: PPC: Book3s: Remove kvmppc_read_inst() function KVM: PPC: Allow kvmppc_get_last_inst() to fail KVM: PPC: Bookehv: Get vcpu's last instruction for emulation Paul Mackerras (4): KVM: PPC: Book3S: Controls for in-kernel sPAPR hypercall handling KVM: PPC: Book3S: Allow only implemented hcalls to be enabled or disabled KVM: PPC: Book3S PR: Take SRCU read lock around RTAS kvm_read_guest() call KVM: PPC: Book3S: Make kvmppc_ld return a more accurate error indication Stewart Smith (2): Split out struct kvmppc_vcore creation to separate function Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8 Conflicts: Documentation/virtual/kvm/api.txt
2014-08-04Merge branch 'x86-efi-for-linus' of ↵Linus Torvalds2-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI changes from Ingo Molnar: "Main changes in this cycle are: - arm64 efi stub fixes, preservation of FP/SIMD registers across firmware calls, and conversion of the EFI stub code into a static library - Ard Biesheuvel - Xen EFI support - Daniel Kiper - Support for autoloading the efivars driver - Lee, Chun-Yi - Use the PE/COFF headers in the x86 EFI boot stub to request that the stub be loaded with CONFIG_PHYSICAL_ALIGN alignment - Michael Brown - Consolidate all the x86 EFI quirks into one file - Saurabh Tangri - Additional error logging in x86 EFI boot stub - Ulf Winkelvos - Support loading initrd above 4G in EFI boot stub - Yinghai Lu - EFI reboot patches for ACPI hardware reduced platforms" * 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits) efi/arm64: Handle missing virtual mapping for UEFI System Table arch/x86/xen: Silence compiler warnings xen: Silence compiler warnings x86/efi: Request desired alignment via the PE/COFF headers x86/efi: Add better error logging to EFI boot stub efi: Autoload efivars efi: Update stale locking comment for struct efivars arch/x86: Remove efi_set_rtc_mmss() arch/x86: Replace plain strings with constants xen: Put EFI machinery in place xen: Define EFI related stuff arch/x86: Remove redundant set_bit(EFI_MEMMAP) call arch/x86: Remove redundant set_bit(EFI_SYSTEM_TABLES) call efi: Introduce EFI_PARAVIRT flag arch/x86: Do not access EFI memory map if it is not available efi: Use early_mem*() instead of early_io*() arch/ia64: Define early_memunmap() x86/reboot: Add EFI reboot quirk for ACPI Hardware Reduced flag efi/reboot: Allow powering off machines using EFI efi/reboot: Add generic wrapper around EfiResetSystem() ...
2014-08-04Merge branch 'locking-core-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: "The main changes in this cycle are: - big rtmutex and futex cleanup and robustification from Thomas Gleixner - mutex optimizations and refinements from Jason Low - arch_mutex_cpu_relax() removal and related cleanups - smaller lockdep tweaks" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) arch, locking: Ciao arch_mutex_cpu_relax() locking/lockdep: Only ask for /proc/lock_stat output when available locking/mutexes: Optimize mutex trylock slowpath locking/mutexes: Try to acquire mutex only if it is unlocked locking/mutexes: Delete the MUTEX_SHOW_NO_WAITER macro locking/mutexes: Correct documentation on mutex optimistic spinning rtmutex: Make the rtmutex tester depend on BROKEN futex: Simplify futex_lock_pi_atomic() and make it more robust futex: Split out the first waiter attachment from lookup_pi_state() futex: Split out the waiter check from lookup_pi_state() futex: Use futex_top_waiter() in lookup_pi_state() futex: Make unlock_pi more robust rtmutex: Avoid pointless requeueing in the deadlock detection chain walk rtmutex: Cleanup deadlock detector debug logic rtmutex: Confine deadlock logic to futex rtmutex: Simplify remove_waiter() rtmutex: Document pi chain walk rtmutex: Clarify the boost/deboost part rtmutex: No need to keep task ref for lock owner check rtmutex: Simplify and document try_to_take_rtmutex() ...
2014-08-04Merge tag 'please-pull-misc-3.17' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull ia64 cleanups from Tony Luck: "Miscellaneous ia64 specific cleanup" * tag 'please-pull-misc-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: [IA64] sn: Do not needlessly convert between pointers and integers [IA64] sn: Fix zeroing of PDAs
2014-08-04Merge tag 'pci-v3.17-changes' of ↵Linus Torvalds1-0/+22
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "I'll be on vacation until Aug 11, and I suspect the merge window will open before then, so I'm sending this to you early. There are more things I'd like to get into v3.17, so I hope to send another pull request soon after I return. The most notable pieces here are: - Support BARs up to 128GB (up from 8GB) - Fix SR-IOV resource assignment when we fail to expand a resource - Rework pciehp to handle a common hardware erratum - Cleanup MSI - Fix NIC renaming issue - Fix VGA default device issue on EFI systems - Fix ASPM configuration (previously we didn't enable it as expected) Alex Williamson has graciously agreed to take care of any major issues with this if you take it before I return. Details: Resource management - Support BAR sizes up to 128GB (Yinghai Lu) - Keep original resource if we fail to expand it (Guo Chao) - Return conventional error values from pci_revert_fw_address() (Bjorn Helgaas) - Tidy resource assignment messages (Bjorn Helgaas) - Don't exclude low BIOS area for non-PCI cards (Christoph Schulz) PCI device hotplug - Prevent NULL dereference during pciehp probe (Andreas Noever) - Make pciehp pcie_wait_cmd() self-contained (Bjorn Helgaas) - Wait for pciehp hotplug command completion lazily (Bjorn Helgaas) - Compute pciehp timeout from hotplug command start time (Bjorn Helgaas) - Remove pciehp assumptions about which commands cause completion events (Bjorn Helgaas) - Clear pciehp Data Link Layer State Changed during init (Myron Stowe) - Remove pciehp struct controller.no_cmd_complete (Rajat Jain) - Remove cpqphp unnecessary null test (Fabian Frederick) - Remove "invalid IRQ" warning for hot-added PCIe ports (Jiang Liu) IOMMU - Add DMA alias quirk for Intel 82801 bridge (Alex Williamson) MSI - Add internal msix_clear_and_set_ctrl() (Yijing Wang) - Remove unused msi_enabled_mask() (Yijing Wang) - Cache Multiple Message Capable in struct msi_desc (Yijing Wang) - Add msi_setup_entry() to clean up initialization (Yijing Wang) - Remove unused msi_remove_pci_irq_vectors() (Yijing Wang) - Retrieve first MSI IRQ from msi_desc rather than pci_dev (Yijing Wang) - Remove unused list access in __pci_restore_msix_state() (Yijing Wang) - Use irq_get_msi_desc() to simplify code (Yijing Wang) Generic host bridge driver - Fix GPL v2 license string typo (Bjorn Helgaas) Marvell MVEBU - Fix GPL v2 license string typo (Thierry Reding) NVIDIA Tegra - Use correct initial HW settings (Phil Edworthy) - Remove rcar_pcie_setup_window() resource argument (Phil Edworthy) - Fix GPL v2 license string typo (Thierry Reding) Renesas R-Car - Remove redundant config accessor register checks (Sergei Shtylyov) - Fix GPL v2 license string typo (Bjorn Helgaas) Virtualization - Factor secondary bus reset logic (Gavin Shan) - Remove duplicate powerpc reset logic (Gavin Shan) Miscellaneous - Rework default VGA detection for EFI (Bruno Prémont) - Fix sysfs "acpi_index" and "label" errors for NIC renaming (Simone Gotti) - Configure ASPM at pci_enable_device()-time (Vidya Sagar) - Add include/linux/pci_ids.h include guard (Rasmus Villemoes)" * tag 'pci-v3.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (38 commits) PCI/MSI: Use irq_get_msi_desc() to simplify code PCI/MSI: Remove unused list access in __pci_restore_msix_state() PCI/MSI: Retrieve first MSI IRQ from msi_desc rather than pci_dev PCI/MSI: Remove unused function msi_remove_pci_irq_vectors() PCI/MSI: Add msi_setup_entry() to clean up MSI initialization PCI: Configure ASPM when enabling device x86: don't exclude low BIOS area when allocating address space for non-PCI cards PCI: generic: Fix GPL v2 license string typo PCI: rcar: Fix GPL v2 license string typo PCI: tegra: Fix GPL v2 license string typo PCI: mvebu: Fix GPL v2 license string typo PCI: Add include guard to include/linux/pci_ids.h x86, ia64: Move EFI_FB vga_default_device() initialization to pci_vga_fixup() PCI: Tidy resource assignment messages PCI: Return conventional error values from pci_revert_fw_address() PCI: Cleanup control flow PCI: Support BAR sizes up to 128GB PCI: cpqphp: Remove unnecessary null test before debugfs_remove() PCI: pciehp: Clear Data Link Layer State Changed during init PCI: Add bridge DMA alias quirk for Intel 82801 bridge ...
2014-07-30timekeeping: Fixup typo in update_vsyscall_old definitionJohn Stultz1-1/+1
In commit 4a0e637738f0 ("clocksource: Get rid of cycle_last"), currently in the -tip tree, there was a small typo where cycles_t was used intstead of cycle_t. This broke ppc64 builds. Fix this by using the proper cycle_t type for this usage, in both the definition and the ia64 implementation. Now, having both cycle_t and cycles_t types seems like a very bad idea just asking for these sorts of issues. But that will be a cleanup for another day. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1406349439-11785-1-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-07-29[IA64] sn: Do not needlessly convert between pointers and integersThierry Reding1-2/+2
The nasid_to_try variable is an array of integers, so plain integers can be used when assigning values to the elements rather than casting a NULL pointer to an integer, which results in the following warning from GCC: arch/ia64/sn/kernel/bte.c:117:22: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] nasid_to_try[1] = (int)NULL; ^ arch/ia64/sn/kernel/bte.c:125:22: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] nasid_to_try[1] = (int)NULL; ^ Replace (int)NULL with a simple 0 to silence these warnings. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2014-07-29[IA64] sn: Fix zeroing of PDAsThierry Reding1-1/+1
The code uses a the following to zero out a PDA: memset(pda, 0, sizeof(pda)); But sizeof(pda) will return the size of a pointer rather than the size of the structure pointed to. This triggers the following warning from GCC: arch/ia64/sn/kernel/setup.c:582:23: warning: argument to 'sizeof' in 'memset' call is the same pointer type 'struct pda_s *' as the destination; expected 'struct pda_s' or an explicit length [-Wsizeof-pointer-memaccess] memset(pda, 0, sizeof(pda)); ^ Fix this by passing in the size of the structure using sizeof(*pda) instead. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2014-07-28KVM: Rename and add argument to check_extensionAlexander Graf1-1/+1
In preparation to make the check_extension function available to VM scope we add a struct kvm * argument to the function header and rename the function accordingly. It will still be called from the /dev/kvm fd, but with a NULL argument for struct kvm *. Signed-off-by: Alexander Graf <agraf@suse.de> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-27Merge branch 'acpi-config'Rafael J. Wysocki2-0/+6
* acpi-config: ACPI / processor: Introduce ARCH_MIGHT_HAVE_ACPI_PDC ACPI: Don't use acpi_lapic in ACPI core code ACPI: add config for BIOS table scan
2014-07-23clocksource: Get rid of cycle_lastThomas Gleixner1-2/+2
cycle_last was added to the clocksource to support the TSC validation. We moved that to the core code, so we can get rid of the extra copy. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: John Stultz <john.stultz@linaro.org>
2014-07-23ACPICA: Linux: Add support to exclude <asm/acenv.h> inclusion.Lv Zheng1-4/+0
The forthcoming patch will make <acpi/acpi.h> to be visible to all kernel source code. Thus for the architectures that do not support ACPI and haven't implemented <asm/acenv.h>, we need to make it excluded. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-21ACPI / processor: Introduce ARCH_MIGHT_HAVE_ACPI_PDCHanjun Guo1-0/+1
The use of _PDC is deprecated in ACPI 3.0 in favor of _OSC, as ARM platform is supported only in ACPI 5.0 or higher version, _PDC will not be used in ARM platform, so make Make _PDC only for platforms with Intel CPUs. Introduce ARCH_MIGHT_HAVE_ACPI_PDC and move _PDC related code in ACPI processor driver into a single file processor_pdc.c, make x86 and ia64 select it when ACPI is enabled. This patch also use pr_* to replace printk to fix the checkpatch warning and factor acpi_processor_alloc_pdc() a little bit to avoid duplicate pr_err() code. Suggested-by: Robert Richter <rric@kernel.org> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-21ACPI: Don't use acpi_lapic in ACPI core codeGraeme Gregory1-0/+5
Now ARM64 support is being added to ACPI so architecture specific values can not be used in core ACPI code. Following on the patch "ACPI / processor: Check if LAPIC is present during initialization" which uses acpi_lapic in acpi_processor.c, on ARM64 platform, GIC is used instead of local APIC, so acpi_lapic is not a suitable value for ARM64. What is actually important at this point is if there is/are CPU entry/entries (Local APIC/SAPIC, GICC) in MADT, so introduce acpi_has_cpu_in_madt() to be arch specific and generic. Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-18arch/ia64: Define early_memunmap()Daniel Kiper1-0/+1
This is odd to use early_iounmap() function do tear down mapping created by early_memremap() function, even if it works right now, because they belong to different set of functions. The former is I/O related function and the later is memory related. So, create early_memunmap() macro which in real is early_iounmap(). This thing will help to not confuse code readers longer by mixing functions from different classes. EFI patches following this patch uses that functionality. Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-07-18efi/reboot: Add generic wrapper around EfiResetSystem()Matt Fleming1-1/+1
Implement efi_reboot(), which is really just a wrapper around the EfiResetSystem() EFI runtime service, but it does at least allow us to funnel all callers through a single location. It also simplifies the callsites since users no longer need to check to see whether EFI_RUNTIME_SERVICES are enabled. Cc: Tony Luck <tony.luck@intel.com> Tested-by: Mark Salter <msalter@redhat.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-07-18kbuild: allow to override Python command nameMasahiro Yamada1-1/+1
The specification of Python 3 is largely different from that of Python 2. For example, arch/ia64/scripts/unwcheck.py seems to be written in Python 2, not compatible with Python 3. It is not a good idea to invoke python scripts with the hard-coded command name 'python'. The command 'python' could possibly be Python 3 on some systems. For that case, it is reasonable to allow to override the command name by giving 'PYTHON=python2' from the command line. The 'python' in arch/ia64/Makefile should be replaced with '$(PYTHON)'. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: linux-ia64@vger.kernel.org Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-07-17arch, locking: Ciao arch_mutex_cpu_relax()Davidlohr Bueso1-0/+1
The arch_mutex_cpu_relax() function, introduced by 34b133f, is hacky and ugly. It was added a few years ago to address the fact that common cpu_relax() calls include yielding on s390, and thus impact the optimistic spinning functionality of mutexes. Nowadays we use this function well beyond mutexes: rwsem, qrwlock, mcs and lockref. Since the macro that defines the call is in the mutex header, any users must include mutex.h and the naming is misleading as well. This patch (i) renames the call to cpu_relax_lowlatency ("relax, but only if you can do it with very low latency") and (ii) defines it in each arch's asm/processor.h local header, just like for regular cpu_relax functions. On all archs, except s390, cpu_relax_lowlatency is simply cpu_relax, and thus we can take it out of mutex.h. While this can seem redundant, I believe it is a good choice as it allows us to move out arch specific logic from generic locking primitives and enables future(?) archs to transparently define it, similarly to System Z. Signed-off-by: Davidlohr Bueso <davidlohr@hp.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Anton Blanchard <anton@samba.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Bharat Bhushan <r65777@freescale.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Chris Zankel <chris@zankel.net> Cc: David Howells <dhowells@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Cc: Dominik Dingel <dingel@linux.vnet.ibm.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Joe Perches <joe@perches.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Joseph Myers <joseph@codesourcery.com> Cc: Kees Cook <keescook@chromium.org> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Mikael Starvik <starvik@axis.com> Cc: Nicolas Pitre <nico@linaro.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Qiaowei Ren <qiaowei.ren@intel.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Steven Miao <realmz6@gmail.com> Cc: Steven Rostedt <srostedt@redhat.com> Cc: Stratos Karafotis <stratosk@semaphore.gr> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vasily Kulikov <segoon@openwall.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Cc: Waiman Long <Waiman.Long@hp.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: adi-buildroot-devel@lists.sourceforge.net Cc: linux390@de.ibm.com Cc: linux-alpha@vger.kernel.org Cc: linux-am33-list@redhat.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-c6x-dev@linux-c6x.org Cc: linux-cris-kernel@axis.com Cc: linux-hexagon@vger.kernel.org Cc: linux-ia64@vger.kernel.org Cc: linux@lists.openrisc.net Cc: linux-m32r-ja@ml.linux-m32r.org Cc: linux-m32r@ml.linux-m32r.org Cc: linux-m68k@lists.linux-m68k.org Cc: linux-metag@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-s390@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: linux-xtensa@linux-xtensa.org Cc: sparclinux@vger.kernel.org Link: http://lkml.kernel.org/r/1404079773.2619.4.camel@buesod1.americas.hpqcorp.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-10x86, ia64: Move EFI_FB vga_default_device() initialization to pci_vga_fixup()Bruno Prémont1-0/+22
Commit b4aa0163056b ("efifb: Implement vga_default_device() (v2)") added efifb vga_default_device() so EFI systems that do not load shadow VBIOS or setup VGA get proper value for boot_vga PCI sysfs attribute on the corresponding PCI device. Xorg doesn't detect devices when boot_vga=0, e.g., on some EFI systems such as MacBookAir2,1. Xorg detects the GPU and finds the DRI device but then bails out with "no devices detected". Note: When vga_default_device() is set boot_vga PCI sysfs attribute reflects its state. When unset this attribute is 1 whenever IORESOURCE_ROM_SHADOW flag is set. With introduction of sysfb/simplefb/simpledrm efifb is getting obsolete while having native drivers for the GPU also makes selecting sysfb/efifb optional. Remove the efifb implementation of vga_default_device() and initialize vgaarb's vga_default_device() with the PCI GPU that matches boot screen_info in pci_fixup_video(). [bhelgaas: remove unused "dev" in efifb_setup()] Fixes: b4aa0163056b ("efifb: Implement vga_default_device() (v2)") Tested-by: Anibal Francisco Martinez Cortina <linuxkid.zeuz@gmail.com> Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Matthew Garrett <matthew.garrett@nebula.com> CC: stable@vger.kernel.org # v3.5+
2014-06-23ia64: arch/ia64/include/uapi/asm/fcntl.h needs personality.hAndrew Morton1-0/+1
fs/notify/fanotify/fanotify_user.c: In function 'SYSC_fanotify_init': fs/notify/fanotify/fanotify_user.c:726: error: implicit declaration of function 'personality' fs/notify/fanotify/fanotify_user.c:726: error: 'PER_LINUX32' undeclared (first use in this function) fs/notify/fanotify/fanotify_user.c:726: error: (Each undeclared identifier is reported only once fs/notify/fanotify/fanotify_user.c:726: error: for each function it appears in.) Reported-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Will Woods <wwoods@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: <stable@vger.kernel.org> [3.15.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-16ACPI / ia64 / sba_iommu: Restore the working initialization orderingRafael J. Wysocki1-27/+37
Commit 66345d5f79fc (ACPI / ia64 / sba_iommu: Use ACPI scan handler for device discovery) changed the ordering of SBA (System Bus Adapter) IOMMU initialization with respect to the PCI host bridge initialization which broke things inadvertently, because the SBA IOMMU initialization code has to run after the PCI host bridge has been initialized. Fix that by reworking the SBA IOMMU ACPI scan handler so that it claims the discovered matching ACPI device objects without attempting to initialize anything and move the entire SBA IOMMU initialization to sba_init() that runs after the PCI bus has been enumerated. Link: https://bugzilla.kernel.org/show_bug.cgi?id=76691 Fixes: 66345d5f79fc (ACPI / ia64 / sba_iommu: Use ACPI scan handler for device discovery) Reported-and-tested-by: Émeric Maschino <emeric.maschino@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: 3.11+ <stable@vger.kernel.org> # 3.11+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-06-06ia64: convert use of typedef ctl_table to struct ctl_tableJoe Perches2-5/+5
This typedef is unnecessary and should just be removed. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04Merge branch 'akpm' (patchbomb from Andrew) into nextLinus Torvalds2-6/+2
Merge misc updates from Andrew Morton: - a few fixes for 3.16. Cc'ed to stable so they'll get there somehow. - various misc fixes and cleanups - most of the ocfs2 queue. Review is slow... - most of MM. The MM queue is pretty huge this time, but not much in the way of feature work. - some tweaks under kernel/ - printk maintenance work - updates to lib/ - checkpatch updates - tweaks to init/ * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (276 commits) fs/autofs4/dev-ioctl.c: add __init to autofs_dev_ioctl_init fs/ncpfs/getopt.c: replace simple_strtoul by kstrtoul init/main.c: remove an ifdef kthreads: kill CLONE_KERNEL, change kernel_thread(kernel_init) to avoid CLONE_SIGHAND init/main.c: add initcall_blacklist kernel parameter init/main.c: don't use pr_debug() fs/binfmt_flat.c: make old_reloc() static fs/binfmt_elf.c: fix bool assignements fs/efs: convert printk(KERN_DEBUG to pr_debug fs/efs: add pr_fmt / use __func__ fs/efs: convert printk to pr_foo() scripts/checkpatch.pl: device_initcall is not the only __initcall substitute checkpatch: check stable email address checkpatch: warn on unnecessary void function return statements checkpatch: prefer kstrto<foo> to sscanf(buf, "%<lhuidx>", &bar); checkpatch: add warning for kmalloc/kzalloc with multiply checkpatch: warn on #defines ending in semicolon checkpatch: make --strict a default for files in drivers/net and net/ checkpatch: always warn on missing blank line after variable declaration block checkpatch: fix wildcard DT compatible string checking ...
2014-06-04mm: disable zone_reclaim_mode by defaultMel Gorman1-1/+2
When it was introduced, zone_reclaim_mode made sense as NUMA distances punished and workloads were generally partitioned to fit into a NUMA node. NUMA machines are now common but few of the workloads are NUMA-aware and it's routine to see major performance degradation due to zone_reclaim_mode being enabled but relatively few can identify the problem. Those that require zone_reclaim_mode are likely to be able to detect when it needs to be enabled and tune appropriately so lets have a sensible default for the bulk of users. This patch (of 2): zone_reclaim_mode causes processes to prefer reclaiming memory from local node instead of spilling over to other nodes. This made sense initially when NUMA machines were almost exclusively HPC and the workload was partitioned into nodes. The NUMA penalties were sufficiently high to justify reclaiming the memory. On current machines and workloads it is often the case that zone_reclaim_mode destroys performance but not all users know how to detect this. Favour the common case and disable it by default. Users that are sophisticated enough to know they need zone_reclaim_mode will detect it. Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>