summaryrefslogtreecommitdiffstats
path: root/arch/csky/kernel
AgeCommit message (Collapse)AuthorFilesLines
2020-01-29Merge tag 'tty-5.6-rc1' of ↵Linus Torvalds1-4/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here are the big set of tty and serial driver updates for 5.6-rc1 Included in here are: - dummy_con cleanups (touches lots of arch code) - sysrq logic cleanups (touches lots of serial drivers) - samsung driver fixes (wasn't really being built) - conmakeshash move to tty subdir out of scripts - lots of small tty/serial driver updates All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits) tty: n_hdlc: Use flexible-array member and struct_size() helper tty: baudrate: SPARC supports few more baud rates tty: baudrate: Synchronise baud_table[] and baud_bits[] tty: serial: meson_uart: Add support for kernel debugger serial: imx: fix a race condition in receive path serial: 8250_bcm2835aux: Document struct bcm2835aux_data serial: 8250_bcm2835aux: Use generic remapping code serial: 8250_bcm2835aux: Allocate uart_8250_port on stack serial: 8250_bcm2835aux: Suppress register_port error on -EPROBE_DEFER serial: 8250_bcm2835aux: Suppress clk_get error on -EPROBE_DEFER serial: 8250_bcm2835aux: Fix line mismatch on driver unbind serial_core: Remove unused member in uart_port vt: Correct comment documenting do_take_over_console() vt: Delete comment referencing non-existent unbind_con_driver() arch/xtensa/setup: Drop dummy_con initialization arch/x86/setup: Drop dummy_con initialization arch/unicore32/setup: Drop dummy_con initialization arch/sparc/setup: Drop dummy_con initialization arch/sh/setup: Drop dummy_con initialization arch/s390/setup: Drop dummy_con initialization ...
2020-01-14arch/csky/setup: Drop dummy_con initializationArvind Sankar1-4/+0
con_init in tty/vt.c will now set conswitchp to dummy_con if it's unset. Drop it from arch setup code. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20191218214506.49252-9-nivedita@alum.mit.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-08sched/rt, csky: Use CONFIG_PREEMPTIONThomas Gleixner1-2/+2
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT. Both PREEMPT and PREEMPT_RT require the same functionality which today depends on CONFIG_PREEMPT. Switch the entry code over to use CONFIG_PREEMPTION. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Guo Ren <guoren@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20191015191821.11479-7-bigeasy@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-04vmlinux.lds.h: Replace RW_DATA_SECTION with RW_DATAKees Cook1-1/+1
Rename RW_DATA_SECTION to RW_DATA. (Calling this a "section" is a lie, since it's multiple sections and section flags cannot be applied to the macro.) Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> # s390 Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: linux-alpha@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-c6x-dev@linux-c6x.org Cc: linux-ia64@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Rick Edgecombe <rick.p.edgecombe@intel.com> Cc: Segher Boessenkool <segher@kernel.crashing.org> Cc: Will Deacon <will@kernel.org> Cc: x86-ml <x86@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20191029211351.13243-14-keescook@chromium.org
2019-11-04vmlinux.lds.h: Replace RO_DATA_SECTION with RO_DATAKees Cook1-1/+1
Finish renaming RO_DATA_SECTION to RO_DATA. (Calling this a "section" is a lie, since it's multiple sections and section flags cannot be applied to the macro.) Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> # s390 Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: linux-alpha@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-c6x-dev@linux-c6x.org Cc: linux-ia64@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Rick Edgecombe <rick.p.edgecombe@intel.com> Cc: Segher Boessenkool <segher@kernel.crashing.org> Cc: Will Deacon <will@kernel.org> Cc: x86-ml <x86@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20191029211351.13243-13-keescook@chromium.org
2019-11-04vmlinux.lds.h: Move NOTES into RO_DATAKees Cook1-1/+0
The .notes section should be non-executable read-only data. As such, move it to the RO_DATA macro instead of being per-architecture defined. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> # s390 Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: linux-alpha@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-c6x-dev@linux-c6x.org Cc: linux-ia64@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Rick Edgecombe <rick.p.edgecombe@intel.com> Cc: Segher Boessenkool <segher@kernel.crashing.org> Cc: Will Deacon <will@kernel.org> Cc: x86-ml <x86@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20191029211351.13243-11-keescook@chromium.org
2019-09-30csky: Move static keyword to the front of declarationKrzysztof Wilczynski1-1/+1
Move the static keyword to the front of declaration of csky_pmu_of_device_ids, and resolve the following compiler warning that can be seen when building with warnings enabled (W=1): arch/csky/kernel/perf_event.c:1340:1: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Guo Ren <guoren@kernel.org>
2019-09-30csky: entry: Remove unneeded need_resched() loopValentin Schneider1-4/+0
Since the enabling and disabling of IRQs within preempt_schedule_irq() is contained in a need_resched() loop, we don't need the outer arch code loop. Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Guo Ren <guoren@kernel.org>
2019-09-30csky: Fixup csky_pmu.max_period assignmentMao Han1-1/+1
The csky_pmu.max_period has type u64, and BIT() can only return 32 bits unsigned long on C-SKY. The initialization for max_period will be incorrect when count_width is bigger than 32. Use BIT_ULL() Signed-off-by: Mao Han <han_mao@c-sky.com> Signed-off-by: Guo Ren <ren_guo@c-sky.com>
2019-09-30csky: Fixup add zero_fp fixup perf backtrace panicGuo Ren2-21/+31
We need set fp zero to let backtrace know the end. The patch fixup perf callchain panic problem, because backtrace didn't know what is the end of fp. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Reported-by: Mao Han <han_mao@c-sky.com>
2019-07-19Merge tag 'csky-for-linus-5.3-rc1' of git://github.com/c-sky/csky-linuxLinus Torvalds3-37/+380
Pull arch/csky pupdates from Guo Ren: "This round of csky subsystem gives two features (ASID algorithm update, Perf pmu record support) and some fixups. ASID updates: - Revert mmu ASID mechanism - Add new asid lib code from arm - Use generic asid algorithm to implement switch_mm - Improve tlb operation with help of asid Perf pmu record support: - Init pmu as a device - Add count-width property for csky pmu - Add pmu interrupt support - Fix perf record in kernel/user space - dt-bindings: Add csky PMU bindings Fixes: - Fixup no panic in kernel for some traps - Fixup some error count in 810 & 860. - Fixup abiv1 memset error" * tag 'csky-for-linus-5.3-rc1' of git://github.com/c-sky/csky-linux: csky: Fixup abiv1 memset error csky: Improve tlb operation with help of asid csky: Use generic asid algorithm to implement switch_mm csky: Add new asid lib code from arm csky: Revert mmu ASID mechanism dt-bindings: csky: Add csky PMU bindings dt-bindings: interrupt-controller: Update csky mpintc csky: Fixup some error count in 810 & 860. csky: Fix perf record in kernel/user space csky: Add pmu interrupt support csky: Add count-width property for csky pmu csky: Init pmu as a device csky: Fixup no panic in kernel for some traps csky: Select intc & timer drivers
2019-07-19csky: Revert mmu ASID mechanismGuo Ren1-2/+0
Current C-SKY ASID mechanism is from mips and it doesn't work well with multi-cores. ASID per core mechanism is not suitable for C-SKY SMP tlb maintain operations, eg: tlbi.vas need share the same asid in all processors and it'll invalid the tlb entry in all cores with the same asid. This patch is prepare for new ASID mechanism. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Arnd Bergmann <arnd@arndb.de>
2019-07-19csky: Fixup some error count in 810 & 860.Guo Ren1-6/+54
CK810 pmu only support event with index 0-8 and 0xd; CK860 only support event 1~4, 0xa~0x1b. So do not register unsupport event to hardware cache event, which may leader to unknown behavior. Signed-off-by: Mao Han <han_mao@c-sky.com> Signed-off-by: Guo Ren <ren_guo@c-sky.com>
2019-07-19csky: Fix perf record in kernel/user spaceMao Han1-12/+14
csky_pmu_event_init is called several times during the perf record initialzation. After configure the event counter in either kernel space or user space, csky_pmu_event_init is called twice with no attr specified. Configuration will be overwritten with sampling in both kernel space and user space. --all-kernel/--all-user is useless without this patch applied. Signed-off-by: Mao Han <han_mao@c-sky.com> Signed-off-by: Guo Ren <guoren@kernel.org>
2019-07-19csky: Add pmu interrupt supportMao Han1-15/+246
This patch add interrupt request and handler for csky pmu. perf can record on hardware event with this patch applied. Signed-off-by: Mao Han <han_mao@c-sky.com> Signed-off-by: Guo Ren <guoren@kernel.org>
2019-07-19csky: Add count-width property for csky pmuMao Han1-1/+14
The csky pmu counter may have different io width. When the counter is smaller then 64 bits and counter value is smaller than the old value, it will result to a extremely large delta value. So the sampled value should be extend to 64 bits to avoid this, the extension bits base on the count-width property from dts. Signed-off-by: Mao Han <han_mao@c-sky.com> Signed-off-by: Guo Ren <guoren@kernel.org>
2019-07-19csky: Init pmu as a deviceMao Han1-2/+48
This patch change the csky pmu initialization from arch init to device init. The pmu can be configued with information from device tree(pmu device name, irq number and etc.). Signed-off-by: Mao Han <han_mao@c-sky.com> Signed-off-by: Guo Ren <guoren@kernel.org>
2019-07-19csky: Fixup no panic in kernel for some trapsGuo Ren1-0/+5
These traps couldn't be hanppen in kernel and we must panic there not send a signal to userspace. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Arnd Bergmann <arnd@arndb.de>
2019-07-08Merge branch 'siginfo-linus' of ↵Linus Torvalds2-4/+2
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull force_sig() argument change from Eric Biederman: "A source of error over the years has been that force_sig has taken a task parameter when it is only safe to use force_sig with the current task. The force_sig function is built for delivering synchronous signals such as SIGSEGV where the userspace application caused a synchronous fault (such as a page fault) and the kernel responded with a signal. Because the name force_sig does not make this clear, and because the force_sig takes a task parameter the function force_sig has been abused for sending other kinds of signals over the years. Slowly those have been fixed when the oopses have been tracked down. This set of changes fixes the remaining abusers of force_sig and carefully rips out the task parameter from force_sig and friends making this kind of error almost impossible in the future" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits) signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus signal: Remove the signal number and task parameters from force_sig_info signal: Factor force_sig_info_to_task out of force_sig_info signal: Generate the siginfo in force_sig signal: Move the computation of force into send_signal and correct it. signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal signal: Remove the task parameter from force_sig_fault signal: Use force_sig_fault_to_task for the two calls that don't deliver to current signal: Explicitly call force_sig_fault on current signal/unicore32: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from ptrace_break signal/nds32: Remove tsk parameter from send_sigtrap signal/riscv: Remove tsk parameter from do_trap signal/sh: Remove tsk parameter from force_sig_info_fault signal/um: Remove task parameter from send_sigtrap signal/x86: Remove task parameter from send_sigtrap signal: Remove task parameter from force_sig_mceerr signal: Remove task parameter from force_sig signal: Remove task parameter from force_sigsegv ...
2019-06-26csky: Fixup libgcc unwind errorGuo Ren1-0/+5
The struct rt_sigframe is also defined in libgcc/config/csky/linux-unwind.h of gcc. Although there is no use for the first three word space, we must keep them the same with linux-unwind.h for member position. The BUG is found in glibc test with the tst-cancel02. The BUG is from commit:bf2416829362 of linux-5.2-rc1 merge window. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Signed-off-by: Mao Han <han_mao@c-sky.com> Cc: Arnd Bergmann <arnd@arndb.de>
2019-05-29signal: Remove the task parameter from force_sig_faultEric W. Biederman1-1/+1
As synchronous exceptions really only make sense against the current task (otherwise how are you synchronous) remove the task parameter from from force_sig_fault to make it explicit that is what is going on. The two known exceptions that deliver a synchronous exception to a stopped ptraced task have already been changed to force_sig_fault_to_task. The callers have been changed with the following emacs regular expression (with obvious variations on the architectures that take more arguments) to avoid typos: force_sig_fault[(]\([^,]+\)[,]\([^,]+\)[,]\([^,]+\)[,]\W+current[)] -> force_sig_fault(\1,\2,\3) Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-27signal: Remove task parameter from force_sigEric W. Biederman1-3/+1
All of the remaining callers pass current into force_sig so remove the task parameter to make this obvious and to make misuse more difficult in the future. This also makes it clear force_sig passes current into force_sig_info. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-22csky/syscall_trace: Fixup return processing flowGuo Ren1-1/+2
The function tracehook_report_syscall_entry's return value is __must_check attribute. We should add return processing flow in ptrace.c and set the syscall number to -1 when failed just like riscv's. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Arnd Bergmann <arnd@arndb.de>
2019-04-22csky: Add support for perf registers samplingMao Han2-0/+41
This patch implements the perf registers sampling and validation API for csky arch. The valid registers and their register ID are defined in perf_regs.h. Perf tool can backtrace in userspace with unwind library and the registers/user stack dump support. Signed-off-by: Mao Han <han_mao@c-sky.com> Signed-off-by: Guo Ren <ren_guo@c-sky.com>
2019-04-22csky: Use va_pa_offset instead of phys_offsetGuo Ren2-5/+5
The name of phys_offset is so common for global export and it may conflict with some local name. So change phys_offset to va_pa_offset which also used by riscv. Also use __pa() and __va() instead of using phys_offset directly. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Arnd Bergmann <arnd@arndb.de>
2019-04-22csky: Support vmlinux bootup with MMU offGuo Ren2-56/+11
Modify SETUP_MMU macro to fit on both MMU-on or MMU-off enviornment and vmlinux could bootup from MMU off enviornment for some cases. Unify the style of _start and _start_smp_secondary in head.S to make head.S looks more concise and easy to understand. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Arnd Bergmann <arnd@arndb.de>
2019-04-22csky: Support dynamic start physical addressGuo Ren2-2/+9
Before this patch csky-linux need CONFIG_RAM_BASE to determine start physical address. Now we use phys_offset variable to replace the macro of PHYS_OFFSET and we setup phys_offset with real physical address which is determined during startup in head.S. With this patch we needn't re-compile kernel for different start physical address. ie: 0x0 / 0xc0000000 start physical address could use the same vmlinux, be care different start address must be 512MB aligned. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Arnd Bergmann <arnd@arndb.de>
2019-04-22csky: Reconstruct signal processingGuo Ren3-260/+146
Linux kernel has provided some apis for arch signal's implementation. For example: restore_saved_sigmask() set_current_blocked() restore_altstack() But in last version of csky signal.c didn't use them and some codes are confusing, so reconstruct signal.c with reference to riscv's code. Now csky signal.c implementation are very close to riscv and we can get the following benefits: - Clear code structure - The signal code of riscv and csky can be reviewed together - Promoting the unification of arch's signal implementation Also modified the related code in entry.S Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Arnd Bergmann <arnd@arndb.de>
2019-04-22csky: Use in_syscall & forget_syscall instead of r11_sigGuo Ren2-16/+10
We could use regs->sr 16-24 bits to detect syscall: VEC_TRAP0 and r11_sig is no necessary for current implementation. In this patch, we implement the in_syscall and forget_syscall which are inspired from arm & nds32, but csky pt_regs has no syscall_num element and we just set zero to regs->sr's vector-bits-field instead. For ret_from_fork, current task was forked from parent which is in syscall progress and its regs->sr has been already setted with VEC_TRAP0. See: arch/csky/kernel/process.c: copy_thread() Signed-off-by: Guo Ren <ren_guo@c-sky.com>
2019-04-22csky: Update syscall_trace_enter/exit implementationGuo Ren2-40/+35
Previous syscall_trace implementation couldn't support AUDITSYSCALL and SYSCALL_TRACEPOINTS. Now we redesign it to support audit_syscall and syscall_tracepoints just like other archs'. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Dmitry V. Levin <ldv@altlinux.org> Cc: Arnd Bergmann <arnd@arndb.de>
2019-04-22csky: Add perf callchain supportMao Han2-0/+120
This patch add support for perf callchain sampling on csky platform. As fp is used to unwind the stack, the program being sampled and the C library need to be compiled with -mbacktrace for user callchains, kernel callchains require CONFIG_STACKTRACE = y. Changelog: - Coding convention with Christoph's advice for riscv's. Signed-off-by: Mao Han <han_mao@c-sky.com> Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Christoph Hellwig <hch@infradead.org>
2019-04-22csky/ftrace: Add dynamic function tracer (include graph tracer)Guo Ren1-2/+146
Support dynamic ftrace including dynamic graph tracer. Gcc-csky with -pg will produce call site in every function prologue and we can use these call site to hook trace function. gcc with -pg origin call site: push lr jbsr _mcount nop32 nop32 If the (callee - caller)'s offset is in range of bsr instruction, we'll modify code with: push lr bsr _mcount nop32 nop32 Else if the (callee - caller)'s offset is out of bsr instrunction, we'll modify code with: push lr movih r26, ... ori r26, ... jsr r26 (r26 is reserved for jsr link reg in csky abiv2 spec.) Signed-off-by: Guo Ren <ren_guo@c-sky.com>
2019-02-13csky: Fixup dead loop in show_stackGuo Ren1-0/+4
When STACKTRACE is enabled, we must pass fp as stack for unwind, otherwise random value in stack will casue a dead loop. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Reported-by: Lu Baoquan <lu.baoquan@intellif.com>
2019-02-13csky: coding convention: Use task_stack_pageGuo Ren1-1/+2
Use task_stack_page instead of p->stack to get stack. Follow the coding convention style. Also for init_stack, the same with other archs. Signed-off-by: Guo Ren <ren_guo@c-sky.com>
2019-02-13csky: Fixup wrong pt_regs sizeGuo Ren1-1/+2
The bug is from commit 2054f4af1957 ("csky: bugfix gdb coredump error.") We change the ELF_NGREG to ELF_NGREG - 2 to fit gdb&gcc define, but forgot modify ptrace regset. Now coredump use ELF_NRGEG to parse GPRs and ptrace use pt_regs_regset, so there are two different reg_sets for userspace. Signed-off-by: Guo Ren <ren_guo@c-sky.com>
2019-01-10csky: fixup compile error with CPU 810.Guo Ren1-1/+1
This bug is from commit f553aa1c13cb ("csky: fixup relocation error with 807 & 860"). I forgot to compile with 810 for that patch. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-08csky: fixup relocation error with 807 & 860Guo Ren1-16/+22
810 doesn't support jsri instruction and csky-as will leave jsri + nop for relocation. Module-probe need replace them with lrw + jsr. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Hui Kai <huikai@acoinfo.com>
2019-01-05Merge tag 'csky-for-linus-4.21' of git://github.com/c-sky/csky-linuxLinus Torvalds12-144/+1265
Pull arch/csky updates from Guo Ren: "Here are three main features (cpu_hotplug, basic ftrace, basic perf) and some bugfixes: Features: - Add CPU-hotplug support for SMP - Add ftrace with function trace and function graph trace - Add Perf support - Add EM_CSKY_OLD 39 - optimize kernel panic print. - remove syscall_exit_work Bugfixes: - fix abiv2 mmap(... O_SYNC) failure - fix gdb coredump error - remove vdsp implement for kernel - fix qemu failure to bootup sometimes - fix ftrace call-graph panic - fix device tree node reference leak - remove meaningless header-y - fix save hi,lo,dspcr regs in switch_stack - remove unused members in processor.h" * tag 'csky-for-linus-4.21' of git://github.com/c-sky/csky-linux: csky: Add perf support for C-SKY csky: Add EM_CSKY_OLD 39 clocksource/drivers/c-sky: fixup ftrace call-graph panic csky: ftrace call graph supported. csky: basic ftrace supported csky: remove unused members in processor.h csky: optimize kernel panic print. csky: stacktrace supported. csky: CPU-hotplug supported for SMP clocksource/drivers/c-sky: fixup qemu fail to bootup sometimes. csky: fixup save hi,lo,dspcr regs in switch_stack. csky: remove syscall_exit_work csky: fixup remove vdsp implement for kernel. csky: bugfix gdb coredump error. csky: fixup abiv2 mmap(... O_SYNC) failed. csky: define syscall_get_arch() elf-em.h: add EM_CSKY csky: remove meaningless header-y csky: Don't leak device tree node reference
2019-01-03Remove 'type' argument from access_ok() functionLinus Torvalds1-1/+1
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-02csky: Add perf support for C-SKYGuo Ren2-0/+1032
This adds basic perf support for all C-SKY CPUs. Hardware events are only supported by 807/810/860. Signed-off-by: Guo Ren <ren_guo@c-sky.com>
2018-12-31csky: ftrace call graph supported.Guo Ren1-11/+37
With csky-gcc -pg -mbacktrace, ftrace call graph supported. Signed-off-by: Guo Ren <ren_guo@c-sky.com>
2018-12-31csky: basic ftrace supportedGuo Ren2-0/+29
When gcc with -pg, it'll add _mcount stub in every function. We need implement the _mcount in kernel and ftrace depends on stackstrace. To do: call-graph, dynamic ftrace Signed-off-by: Guo Ren <ren_guo@c-sky.com>
2018-12-31csky: remove unused members in processor.hGuo Ren5-25/+0
Cleanup struct cpuinfo_csky and struct thread_struct, remove all esp0 related code. We could get pt_regs from sp and backtrace could use fp in switch_stack. Signed-off-by: Guo Ren <ren_guo@c-sky.com>
2018-12-31csky: optimize kernel panic print.Guo Ren2-54/+39
Use STACKTRACE to optimize panic print more pretty and align registers printing. Signed-off-by: Guo Ren <ren_guo@c-sky.com>
2018-12-31csky: stacktrace supported.Guo Ren3-12/+75
The gcc option "-mbacktrace" will push fp(r8),lr into stack and we could unwind the stack with: fp = *fp lr = (unsigned int *)fp[1] Signed-off-by: Guo Ren <ren_guo@c-sky.com>
2018-12-31csky: CPU-hotplug supported for SMPGuo Ren1-15/+56
This is a simple implement of CPU-hotplug for power saving. CPU use wait instruction to enter power saving mode and waiting for IPI wakeup signal. Signed-off-by: Guo Ren <ren_guo@c-sky.com>
2018-12-31csky: fixup save hi,lo,dspcr regs in switch_stack.Guo Ren3-25/+3
HI, LO, DSPCR registers are 807/810 related regs and no need for 610/860. All of the regs must be saved in pt_regs and switch_stack. This patch fixup saving dspcr reg in switch_stack and pt_regs. Signed-off-by: Guo Ren <ren_guo@c-sky.com>
2018-12-31csky: remove syscall_exit_workGuo Ren1-12/+4
Remove syscall_exit_work and union all to ret_from_exception. Signed-off-by: Guo Ren <ren_guo@c-sky.com>
2018-12-30csky: Don't leak device tree node referenceYangtao Li1-1/+1
of_find_node_by_type() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. setup_smp() doesn't do that, so fix it by converting to for_each_of_cpu_node(). Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Guo Ren <guoren@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-20 03:28:33 +0000