summaryrefslogtreecommitdiffstats
path: root/arch/cris
AgeCommit message (Collapse)AuthorFilesLines
2016-05-24Merge tag 'for-linus-20160523' of git://git.infradead.org/linux-mtdLinus Torvalds2-0/+2
Pull MTD updates from Brian Norris: "First cycle with Boris as NAND maintainer! Many (most) bullets stolen from him. Generic: - Migrated NAND LED trigger to be a generic MTD trigger NAND: - Introduction of the "ECC algorithm" concept, to avoid overloading the ECC mode field too much more - Replaced the nand_ecclayout infrastructure with something a little more flexible (finally!) and future proof - Rework of the OMAP GPMC and NAND drivers; the TI folks pulled some of this into their own tree as well - Prepare the sunxi NAND driver to receive DMA support - Handle bitflips in erased pages on GPMI revisions that do not support this in hardware. SPI NOR: - Start using the spi_flash_read() API for SPI drivers that support it (i.e., SPI drivers with special memory-mapped flash modes) And other small scattered improvments" * tag 'for-linus-20160523' of git://git.infradead.org/linux-mtd: (155 commits) mtd: spi-nor: support GigaDevice gd25lq64c mtd: nand_bch: fix spelling of "probably" mtd: brcmnand: respect ECC algorithm set by NAND subsystem gpmi-nand: Handle ECC Errors in erased pages Documentation: devicetree: deprecate "soft_bch" nand-ecc-mode value mtd: nand: add support for "nand-ecc-algo" DT property mtd: mtd: drop NAND_ECC_SOFT_BCH enum value mtd: drop support for NAND_ECC_SOFT_BCH as "soft_bch" mapping mtd: nand: read ECC algorithm from the new field mtd: nand: fsmc: validate ECC setup by checking algorithm directly mtd: nand: set ECC algorithm to Hamming on fallback staging: mt29f_spinand: set ECC algorithm explicitly CRIS v32: nand: set ECC algorithm explicitly mtd: nand: atmel: set ECC algorithm explicitly mtd: nand: davinci: set ECC algorithm explicitly mtd: nand: bf5xx: set ECC algorithm explicitly mtd: nand: omap2: Fix high memory dma prefetch transfer mtd: nand: omap2: Start dma request before enabling prefetch mtd: nandsim: add __init attribute mtd: nand: move of_get_nand_xxx() helpers into nand_base.c ...
2016-05-20printk/nmi: generic solution for safe printk in NMIPetr Mladek1-0/+1
printk() takes some locks and could not be used a safe way in NMI context. The chance of a deadlock is real especially when printing stacks from all CPUs. This particular problem has been addressed on x86 by the commit a9edc8809328 ("x86/nmi: Perform a safe NMI stack trace on all CPUs"). The patchset brings two big advantages. First, it makes the NMI backtraces safe on all architectures for free. Second, it makes all NMI messages almost safe on all architectures (the temporary buffer is limited. We still should keep the number of messages in NMI context at minimum). Note that there already are several messages printed in NMI context: WARN_ON(in_nmi()), BUG_ON(in_nmi()), anything being printed out from MCE handlers. These are not easy to avoid. This patch reuses most of the code and makes it generic. It is useful for all messages and architectures that support NMI. The alternative printk_func is set when entering and is reseted when leaving NMI context. It queues IRQ work to copy the messages into the main ring buffer in a safe context. __printk_nmi_flush() copies all available messages and reset the buffer. Then we could use a simple cmpxchg operations to get synchronized with writers. There is also used a spinlock to get synchronized with other flushers. We do not longer use seq_buf because it depends on external lock. It would be hard to make all supported operations safe for a lockless use. It would be confusing and error prone to make only some operations safe. The code is put into separate printk/nmi.c as suggested by Steven Rostedt. It needs a per-CPU buffer and is compiled only on architectures that call nmi_enter(). This is achieved by the new HAVE_NMI Kconfig flag. The are MN10300 and Xtensa architectures. We need to clean up NMI handling there first. Let's do it separately. The patch is heavily based on the draft from Peter Zijlstra, see https://lkml.org/lkml/2015/6/10/327 [arnd@arndb.de: printk-nmi: use %zu format string for size_t] [akpm@linux-foundation.org: min_t->min - all types are size_t here] Signed-off-by: Petr Mladek <pmladek@suse.com> Suggested-by: Peter Zijlstra <peterz@infradead.org> Suggested-by: Steven Rostedt <rostedt@goodmis.org> Cc: Jan Kara <jack@suse.cz> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> [arm part] Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jiri Kosina <jkosina@suse.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: David Miller <davem@davemloft.net> Cc: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20exit_thread: accept a task parameter to be exitedJiri Slaby1-2/+2
We need to call exit_thread from copy_process in a fail path. So make it accept task_struct as a parameter. [v2] * s390: exit_thread_runtime_instr doesn't make sense to be called for non-current tasks. * arm: fix the comment in vfp_thread_copy * change 'me' to 'tsk' for task_struct * now we can change only archs that actually have exit_thread [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: "David S. Miller" <davem@davemloft.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Chris Zankel <chris@zankel.net> Cc: David Howells <dhowells@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Jonas Bonn <jonas@southpole.se> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Mikael Starvik <starvik@axis.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@arm.linux.org.uk> Cc: Steven Miao <realmz6@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20exit_thread: remove empty bodiesJiri Slaby2-9/+1
Define HAVE_EXIT_THREAD for archs which want to do something in exit_thread. For others, let's define exit_thread as an empty inline. This is a cleanup before we change the prototype of exit_thread to accept a task parameter. [akpm@linux-foundation.org: fix mips] Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: "David S. Miller" <davem@davemloft.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Chris Zankel <chris@zankel.net> Cc: David Howells <dhowells@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Jonas Bonn <jonas@southpole.se> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Mikael Starvik <starvik@axis.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@arm.linux.org.uk> Cc: Steven Miao <realmz6@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-17Merge tag 'gpio-v4.7-1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for kernel cycle v4.7: Core infrastructural changes: - Support for natively single-ended GPIO driver stages. This means that if the hardware has registers to configure open drain or open source configuration, we use that rather than (as we did before) try to emulate it by switching the line to an input to get high impedance. This is also documented throughly in Documentation/gpio/driver.txt for those of you who did not understand one word of what I just wrote. - Start to do away with the unnecessarily complex and unitelligible ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB, another evolutional artifact from the time when the GPIO subsystem was unmaintained. Archs can now just select GPIOLIB and be done with it, cleanups to arches will trickle in for the next kernel. Some minor archs ACKed the changes immediately so these are included in this pull request. - Advancing the use of the data pointer inside the GPIO device for storing driver data by switching the PowerPC, Super-H Unicore and a few other subarches or subsystem drivers in ALSA SoC, Input, serial, SSB, staging etc to use it. - The initialization now reads the input/output state of the GPIO lines, so that each GPIO descriptor knows - if this callback is implemented - whether the line is input or output. This also reflects nicely in userspace "lsgpio". - It is now possible to name GPIO producer names, line names, from the device tree. (Platform data has been supported for a while). I bet we will get a similar mechanism for ACPI one of those days. This makes is possible to get sensible producer names for e.g. GPIO rails in "lsgpio" in userspace. New drivers: - New driver for the Loongson1. - The XLP driver now supports Broadcom Vulcan ARM64. - The IT87 driver now supports IT8620 and IT8628. - The PCA953X driver now supports Galileo Gen2. Driver improvements: - MCP23S08 was switched to use the gpiolib irqchip helpers and now also suppors level-triggered interrupts. - 74x164 and RCAR now supports the .set_multiple() callback - AMDPT was converted to use generic GPIO. - TC3589x, TPS65218, SX150X, F7188X, MENZ127, VX855, WM831X, WM8994 support the new single ended callback for open drain and in some cases open source. - Implement the .get_direction() callback for a few more drivers like PL061, Xgene. Cleanups: - Paul Gortmaker combed through the drivers and de-modularized those who are not really modules. - Move the GPIO poweroff DT bindings to the power subdir where they belong. - Rename gpio-generic.c to gpio-mmio.c, which is much more to the point. That's what it is handling, nothing more, nothing less" * tag 'gpio-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (126 commits) MIPS: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB gpio: zevio: make it explicitly non-modular gpio: timberdale: make it explicitly non-modular gpio: stmpe: make it explicitly non-modular gpio: sodaville: make it explicitly non-modular pinctrl: sh-pfc: Let gpio_chip.to_irq() return zero on error gpio: dwapb: Add ACPI device ID for DWAPB GPIO controller on X-Gene platforms gpio: dt-bindings: add wd,mbl-gpio bindings gpio: of: make it possible to name GPIO lines gpio: make gpiod_to_irq() return negative for NO_IRQ gpio: xgene: implement .get_direction() gpio: xgene: Enable ACPI support for X-Gene GFC GPIO driver gpio: tegra: Implement gpio_get_direction callback gpio: set up initial state from .get_direction() gpio: rename gpio-generic.c into gpio-mmio.c gpio: generic: fix GPIO_GENERIC_PLATFORM is set to module case gpio: dwapb: add gpio-signaled acpi event support gpio: dwapb: convert device node to fwnode gpio: dwapb: remove name from dwapb_port_property gpio/qoriq: select IRQ_DOMAIN ...
2016-05-05CRIS v32: nand: set ECC algorithm explicitlyRafał Miłecki2-0/+2
This is part of process deprecating NAND_ECC_SOFT_BCH (and switching to enum nand_ecc_algo). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Mikael Starvik <starvik@axis.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-04-26cris: do away with ARCH_REQUIRE_GPIOLIBLinus Walleij1-1/+1
Replace "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB" as this can now be selected directly. Cc: Michael Büsch <m@bues.ch> Cc: Mikael Starvik <starvik@axis.com> Cc: linux-cris-kernel@axis.com Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-18cris: Fix misspellings in comments.Adam Buchbinder5-5/+5
Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-03-20Merge branch 'mm-pkeys-for-linus' of ↵Linus Torvalds1-6/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 protection key support from Ingo Molnar: "This tree adds support for a new memory protection hardware feature that is available in upcoming Intel CPUs: 'protection keys' (pkeys). There's a background article at LWN.net: https://lwn.net/Articles/643797/ The gist is that protection keys allow the encoding of user-controllable permission masks in the pte. So instead of having a fixed protection mask in the pte (which needs a system call to change and works on a per page basis), the user can map a (handful of) protection mask variants and can change the masks runtime relatively cheaply, without having to change every single page in the affected virtual memory range. This allows the dynamic switching of the protection bits of large amounts of virtual memory, via user-space instructions. It also allows more precise control of MMU permission bits: for example the executable bit is separate from the read bit (see more about that below). This tree adds the MM infrastructure and low level x86 glue needed for that, plus it adds a high level API to make use of protection keys - if a user-space application calls: mmap(..., PROT_EXEC); or mprotect(ptr, sz, PROT_EXEC); (note PROT_EXEC-only, without PROT_READ/WRITE), the kernel will notice this special case, and will set a special protection key on this memory range. It also sets the appropriate bits in the Protection Keys User Rights (PKRU) register so that the memory becomes unreadable and unwritable. So using protection keys the kernel is able to implement 'true' PROT_EXEC on x86 CPUs: without protection keys PROT_EXEC implies PROT_READ as well. Unreadable executable mappings have security advantages: they cannot be read via information leaks to figure out ASLR details, nor can they be scanned for ROP gadgets - and they cannot be used by exploits for data purposes either. We know about no user-space code that relies on pure PROT_EXEC mappings today, but binary loaders could start making use of this new feature to map binaries and libraries in a more secure fashion. There is other pending pkeys work that offers more high level system call APIs to manage protection keys - but those are not part of this pull request. Right now there's a Kconfig that controls this feature (CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS) that is default enabled (like most x86 CPU feature enablement code that has no runtime overhead), but it's not user-configurable at the moment. If there's any serious problem with this then we can make it configurable and/or flip the default" * 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits) x86/mm/pkeys: Fix mismerge of protection keys CPUID bits mm/pkeys: Fix siginfo ABI breakage caused by new u64 field x86/mm/pkeys: Fix access_error() denial of writes to write-only VMA mm/core, x86/mm/pkeys: Add execute-only protection keys support x86/mm/pkeys: Create an x86 arch_calc_vm_prot_bits() for VMA flags x86/mm/pkeys: Allow kernel to modify user pkey rights register x86/fpu: Allow setting of XSAVE state x86/mm: Factor out LDT init from context init mm/core, x86/mm/pkeys: Add arch_validate_pkey() mm/core, arch, powerpc: Pass a protection key in to calc_vm_flag_bits() x86/mm/pkeys: Actually enable Memory Protection Keys in the CPU x86/mm/pkeys: Add Kconfig prompt to existing config option x86/mm/pkeys: Dump pkey from VMA in /proc/pid/smaps x86/mm/pkeys: Dump PKRU with other kernel registers mm/core, x86/mm/pkeys: Differentiate instruction fetches x86/mm/pkeys: Optimize fault handling in access_error() mm/core: Do not enforce PKEY permissions on remote mm access um, pkeys: Add UML arch_*_access_permitted() methods mm/gup, x86/mm/pkeys: Check VMAs and PTEs for protection keys x86/mm/gup: Simplify get_user_pages() PTE bit handling ...
2016-03-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds3-6/+5
Pull networking updates from David Miller: "Highlights: 1) Support more Realtek wireless chips, from Jes Sorenson. 2) New BPF types for per-cpu hash and arrap maps, from Alexei Starovoitov. 3) Make several TCP sysctls per-namespace, from Nikolay Borisov. 4) Allow the use of SO_REUSEPORT in order to do per-thread processing of incoming TCP/UDP connections. The muxing can be done using a BPF program which hashes the incoming packet. From Craig Gallek. 5) Add a multiplexer for TCP streams, to provide a messaged based interface. BPF programs can be used to determine the message boundaries. From Tom Herbert. 6) Add 802.1AE MACSEC support, from Sabrina Dubroca. 7) Avoid factorial complexity when taking down an inetdev interface with lots of configured addresses. We were doing things like traversing the entire address less for each address removed, and flushing the entire netfilter conntrack table for every address as well. 8) Add and use SKB bulk free infrastructure, from Jesper Brouer. 9) Allow offloading u32 classifiers to hardware, and implement for ixgbe, from John Fastabend. 10) Allow configuring IRQ coalescing parameters on a per-queue basis, from Kan Liang. 11) Extend ethtool so that larger link mode masks can be supported. From David Decotigny. 12) Introduce devlink, which can be used to configure port link types (ethernet vs Infiniband, etc.), port splitting, and switch device level attributes as a whole. From Jiri Pirko. 13) Hardware offload support for flower classifiers, from Amir Vadai. 14) Add "Local Checksum Offload". Basically, for a tunneled packet the checksum of the outer header is 'constant' (because with the checksum field filled into the inner protocol header, the payload of the outer frame checksums to 'zero'), and we can take advantage of that in various ways. From Edward Cree" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1548 commits) bonding: fix bond_get_stats() net: bcmgenet: fix dma api length mismatch net/mlx4_core: Fix backward compatibility on VFs phy: mdio-thunder: Fix some Kconfig typos lan78xx: add ndo_get_stats64 lan78xx: handle statistics counter rollover RDS: TCP: Remove unused constant RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket net: smc911x: convert pxa dma to dmaengine team: remove duplicate set of flag IFF_MULTICAST bonding: remove duplicate set of flag IFF_MULTICAST net: fix a comment typo ethernet: micrel: fix some error codes ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use it bpf, dst: add and use dst_tclassid helper bpf: make skb->tc_classid also readable net: mvneta: bm: clarify dependencies cls_bpf: reset class and reuse major in da ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c ldmvsw: Add ldmvsw.c driver code ...
2016-03-13ipv4: Update parameters for csum_tcpudp_magic to their original typesAlexander Duyck3-6/+5
This patch updates all instances of csum_tcpudp_magic and csum_tcpudp_nofold to reflect the types that are usually used as the source inputs. For example the protocol field is populated based on nexthdr which is actually an unsigned 8 bit value. The length is usually populated based on skb->len which is an unsigned integer. This addresses an issue in which the IPv6 function csum_ipv6_magic was generating a checksum using the full 32b of skb->len while csum_tcpudp_magic was only using the lower 16 bits. As a result we could run into issues when attempting to adjust the checksum as there was no protocol agnostic way to update it. With this change the value is still truncated as many architectures use "(len + proto) << 8", however this truncation only occurs for values greater than 16776960 in length and as such is unlikely to occur as we stop the inner headers at ~64K in size. I did have to make a few minor changes in the arm, mn10300, nios2, and score versions of the function in order to support these changes as they were either using things such as an OR to combine the protocol and length, or were using ntohs to convert the length which would have truncated the value. I also updated a few spots in terms of whitespace and type differences for the addresses. Most of this was just to make sure all of the definitions were in sync going forward. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07PCI: Move pci_dma_* helpers to common codeChristoph Hellwig1-3/+0
For a long time all architectures implement the pci_dma_* functions using the generic DMA API, and they all use the same header to do so. Move this header, pci-dma-compat.h, to include/linux and include it from the generic pci.h instead of having each arch duplicate this include. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-02-16mm/gup: Switch all callers of get_user_pages() to not pass tsk/mmDave Hansen1-6/+2
We will soon modify the vanilla get_user_pages() so it can no longer be used on mm/tasks other than 'current/current->mm', which is by far the most common way it is called. For now, we allow the old-style calls, but warn when they are used. (implemented in previous patch) This patch switches all callers of: get_user_pages() get_user_pages_unlocked() get_user_pages_locked() to stop passing tsk/mm so they will no longer see the warnings. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: jack@suse.cz Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20160212210156.113E9407@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-21Merge branch 'akpm' (patches from Andrew)Linus Torvalds2-166/+49
Merge third patch-bomb from Andrew Morton: "I'm pretty much done for -rc1 now: - the rest of MM, basically - lib/ updates - checkpatch, epoll, hfs, fatfs, ptrace, coredump, exit - cpu_mask simplifications - kexec, rapidio, MAINTAINERS etc, etc. - more dma-mapping cleanups/simplifications from hch" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (109 commits) MAINTAINERS: add/fix git URLs for various subsystems mm: memcontrol: add "sock" to cgroup2 memory.stat mm: memcontrol: basic memory statistics in cgroup2 memory controller mm: memcontrol: do not uncharge old page in page cache replacement Documentation: cgroup: add memory.swap.{current,max} description mm: free swap cache aggressively if memcg swap is full mm: vmscan: do not scan anon pages if memcg swap limit is hit swap.h: move memcg related stuff to the end of the file mm: memcontrol: replace mem_cgroup_lruvec_online with mem_cgroup_online mm: vmscan: pass memcg to get_scan_count() mm: memcontrol: charge swap to cgroup2 mm: memcontrol: clean up alloc, online, offline, free functions mm: memcontrol: flatten struct cg_proto mm: memcontrol: rein in the CONFIG space madness net: drop tcp_memcontrol.c mm: memcontrol: introduce CONFIG_MEMCG_LEGACY_KMEM mm: memcontrol: allow to disable kmem accounting for cgroup2 mm: memcontrol: account "kmem" consumers in cgroup2 memory controller mm: memcontrol: move kmem accounting code to CONFIG_MEMCG mm: memcontrol: separate kmem code from legacy tcp accounting code ...
2016-01-21Merge tag 'cris-for-4.5' of ↵Linus Torvalds4-15/+20
git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris Pull CRIS updates from Jesper Nilsson: "Just some fixups for section mismatches from Guenter" * tag 'cris-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris: cris: Fix section mismatches in architecture startup code cris: debugport: Fix section mismatches
2016-01-20dma-mapping: always provide the dma_map_ops based implementationChristoph Hellwig2-3/+0
Move the generic implementation to <linux/dma-mapping.h> now that all architectures support it and remove the HAVE_DMA_ATTR Kconfig symbol now that everyone supports them. [valentinrothberg@gmail.com: remove leftovers in Kconfig] Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Helge Deller <deller@gmx.de> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Steven Miao <realmz6@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-20cris: convert to dma_map_opsChristoph Hellwig3-165/+51
Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-12-18cris: nand: remove useless mtd->priv = chip assignmentsBoris BREZILLON2-6/+0
mtd_to_nand() now uses the container_of() approach to transform an mtd_info pointer into a nand_chip one. Drop useless mtd->priv assignments from NAND controller drivers. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-12-18cris: nand: use the mtd instance embedded in struct nand_chipBoris BREZILLON2-4/+2
struct nand_chip now embeds an mtd device. Patch all drivers to make use of this mtd instance instead of using the instance embedded in their private struct or dynamically allocated. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-12-15cris: Fix section mismatches in architecture startup codeGuenter Roeck3-4/+9
Section mismatches can now result in build failures. As result, cris:allnoconfig fails to build as follows. WARNING: modpost: Found 7 section mismatch(es). To see full details build your kernel with: 'make CONFIG_DEBUG_SECTION_MISMATCH=y' FATAL: modpost: Section mismatches detected. Set CONFIG_SECTION_MISMATCH_WARN_ONLY=y to allow them. Part of the problem is that references from .text to .init.text are not permitted, and such references are used in cris startup code. Since references from .head.text to .init.text are permitted, move cris startup code to a new section .head.text. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-12-15cris: debugport: Fix section mismatchesGuenter Roeck1-11/+11
Section mismatches can now cause build failures, such as for cris:allnoconfig. Rename affected variables to end with _console to make section mismatch checks happy. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-12-08cris: nand: make use of mtd_to_nand() where appropriateBoris BREZILLON2-2/+2
mtd_to_nand() was recently introduced to avoid direct accesses to the mtd->priv field. Update all CRIS specific implementations to use this helper. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-11-02cris: Drop reference to get_cmos_time()Guenter Roeck1-2/+0
Function get_cmos_time() was removed with commit 657926a83df9 ("cris: time: Cleanup of persistent clock stuff"). The remaining reference to it may cause the following build error. arch/cris/kernel/built-in.o:(___ksymtab+get_cmos_time+0x0): undefined reference to `get_cmos_time' Makefile:946: recipe for target 'vmlinux' failed Fixes: 657926a83df9 ("cris: time: Cleanup of persistent clock stuff") Cc: Xunlei Pang <pang.xunlei@linaro.org> Cc: Rabin Vincent <rabin@rab.in> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jesper Nilsson <jespern@axis.com>
2015-11-02CRIS: Drop code related to obsolete or unused kconfigsJesper Nilsson10-313/+5
Drop all code related to Kconfigs that don't exist. Fix one Kconfig where it was actually typo:ed (ETRAX_KGB_PORT2) Drop content related to CRIS v32 SoCs from etraxgpio.h headerfile, all use of GPIO for both ETRAX FS and ARTPEC-3 should now be through standard gpiolib instead. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-11-02cris: time: Cleanup of persistent clock stuffXunlei Pang2-26/+0
- Remove update_persistent_clock(), as it does nothing now. - Remove read_persistent_clock(), let it fall back to the weak version. Cc: Mikael Starvik <starvik@axis.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Acked-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jespern@axis.com>
2015-11-02cris: re-use helpers to dump data in hex formatAndy Shevchenko1-34/+6
There are native helpers such as print_hex_byte() and %*ph specifier to dump data in hex format. Re-use them instead of a custom approach. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jesper Nilsson <jespern@axis.com>
2015-11-02CRIS v32: remove old GPIO and LEDs codeRabin Vincent13-2702/+4
Since we now have a gpiolib driver, remove this code: The gpio-etraxfs driver (along with things like gpio-keys-polled for polling support) replaces the GIO driver implementations in mach-a3 and mach-fs. The various generic external chip drivers replace the "virtual gpio" parts. The generic gpio-leds driver replaces the LED handling. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jespern@axis.com>
2015-11-02CRIS v32: remove I2C bitbanging driverRabin Vincent4-786/+0
Now that we have a gpiolib GPIO driver, the generic i2c-gpio driver provides this functionality. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jespern@axis.com>
2015-11-02CRIS v32: add ARTPEC-3 and P1343 device treesRabin Vincent2-0/+122
Add a device tree for the Axis P1343 with the ARTPEC-3 SoC and on-board LEDs and RTC. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jespern@axis.com>
2015-11-02CRIS v32: dev88: add GPIO, LEDs, RTC, temp sensorRabin Vincent2-0/+57
Add the GPIO driver to the device tree and, using it, support for the LEDs and the RTC chip (via I2C-GPIO), as well as the temperature sensor (via SPI-GPIO). Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jespern@axis.com>
2015-11-02CRIS: add dt-bindings symlinkRabin Vincent1-0/+1
Add a dt-bindings symlink to get DT include files, as on other architectures. See c58299a ("kbuild: create an "include chroot" for DT bindings") for the details. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jespern@axis.com>
2015-11-02CRIS v32: increase NR_IRQSRabin Vincent2-3/+3
Increase NR_IQRS so we can fit in GPIO interrupts. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jespern@axis.com>
2015-11-02cris: arch-v10: kgdb: Add '__used' for static variable is_dyn_brkpChen Gang1-1/+1
Within one C file, current gcc can optimize the global static variables according to the C code, but it will skip assembly code -- it will pass them to gas directly. if the static variable is used between C code and assembly code in one C file (e.g. is_dyn_brkp in kgdb.c), it needs '__used' to let gcc know it should be still used, or gcc may remove it for optimization. The related error in this case: LD init/built-in.o arch/cris/arch-v10/kernel/built-in.o: In function `kgdb_handle_breakpoint': (.text+0x2aca): undefined reference to `is_dyn_brkp' arch/cris/arch-v10/kernel/built-in.o: In function `is_static': kgdb.c:(.text+0x2ada): undefined reference to `is_dyn_brkp' Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Jesper Nilsson <jespern@axis.com>
2015-11-02cris: arch-v10: kgdb: Use BAR instead of DTP0 for register P12Chen Gang1-2/+2
For arch-v10, there is no DTP0 register, and at present, assembler know BAR, so use BAR instead of DTP0, the related error (with allmodconfig): CC arch/cris/arch-v10/kernel/kgdb.o {standard input}: Assembler messages: {standard input}:6: Error: Illegal operands {standard input}:6: Error: Illegal operands Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Acked-by: Hans-Peter Nilsson <hp@axis.com> Signed-off-by: Jesper Nilsson <jespern@axis.com>
2015-11-02cris: kgdb: use native hex2binAndy Shevchenko2-108/+71
There are kernel native helpers to convert hex ascii to the binary format: hex_to_bin() and hex2bin(). Thus, no need to reimplement them customly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jesper Nilsson <jespern@axis.com>
2015-10-04Merge branch 'strscpy' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile Pull strscpy string copy function implementation from Chris Metcalf. Chris sent this during the merge window, but I waffled back and forth on the pull request, which is why it's going in only now. The new "strscpy()" function is definitely easier to use and more secure than either strncpy() or strlcpy(), both of which are horrible nasty interfaces that have serious and irredeemable problems. strncpy() has a useless return value, and doesn't NUL-terminate an overlong result. To make matters worse, it pads a short result with zeroes, which is a performance disaster if you have big buffers. strlcpy(), by contrast, is a mis-designed "fix" for strlcpy(), lacking the insane NUL padding, but having a differently broken return value which returns the original length of the source string. Which means that it will read characters past the count from the source buffer, and you have to trust the source to be properly terminated. It also makes error handling fragile, since the test for overflow is unnecessarily subtle. strscpy() avoids both these problems, guaranteeing the NUL termination (but not excessive padding) if the destination size wasn't zero, and making the overflow condition very obvious by returning -E2BIG. It also doesn't read past the size of the source, and can thus be used for untrusted source data too. So why did I waffle about this for so long? Every time we introduce a new-and-improved interface, people start doing these interminable series of trivial conversion patches. And every time that happens, somebody does some silly mistake, and the conversion patch to the improved interface actually makes things worse. Because the patch is mindnumbing and trivial, nobody has the attention span to look at it carefully, and it's usually done over large swatches of source code which means that not every conversion gets tested. So I'm pulling the strscpy() support because it *is* a better interface. But I will refuse to pull mindless conversion patches. Use this in places where it makes sense, but don't do trivial patches to fix things that aren't actually known to be broken. * 'strscpy' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: use global strscpy() rather than private copy string: provide strscpy() Make asm/word-at-a-time.h available on all architectures
2015-09-05CRISv10: delete unused lib/dmacopy.cRabin Vincent1-42/+0
This file is never built. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jespern@axis.com>
2015-09-05CRISv10: delete unused lib/old_checksum.cRabin Vincent1-86/+0
This file is never built. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05CRIS: fix switch_mm() lockdep splatRabin Vincent1-1/+8
With lockdep support implemented on CRISv32, we get the following splat. switch_mm() can be called both from the scheduler() (with interrupts disabled) and from flush_old_exec (via activate_mm()), with interrupts enabled. Fix it by disabling interrupts in activate_mm(), similar to powerpc and hexagon. t====================================================== [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ] 3.19.0-08802-g20bc9f1-dirty #323 Not tainted ------------------------------------------------------ init/1 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: (mmu_context_lock){+.+...}, at: [<c0009290>] switch_mm+0x22/0xc6 and this task is already holding: (&rq->lock){-.-.-.}, at: [<c01a0756>] __schedule+0x5e/0x648 which would create a new lock dependency: (&rq->lock){-.-.-.} -> (mmu_context_lock){+.+...} but this new dependency connects a HARDIRQ-irq-safe lock: (&rq->lock){-.-.-.} ... which became HARDIRQ-irq-safe at: [<c002b03c>] scheduler_tick+0x28/0x5e [<c0007c6c>] timer_interrupt+0x4e/0x6a [<c0043ac4>] handle_irq_event_percpu+0x54/0x13c [<c004343c>] generic_handle_irq+0x2a/0x36 to a HARDIRQ-irq-unsafe lock: (mmu_context_lock){+.+...} ... which became HARDIRQ-irq-unsafe at: ... [<c0039e60>] __lock_acquire+0x8f8/0x1d9c [<c0009290>] switch_mm+0x22/0xc6 [<c009c260>] flush_old_exec+0x500/0x5d4 [<c00da4c6>] load_elf_phdrs+0x7a/0x84 [<c00dbdb0>] load_elf_binary+0x21c/0x13b4 [<c009cdb6>] do_execve+0x22/0x2c [<c001dcf2>] ____call_usermodehelper+0x0/0x154 [<c000581e>] ret_from_kernel_thread+0xe/0x14 other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(mmu_context_lock); local_irq_disable(); lock(&rq->lock); lock(mmu_context_lock); <Interrupt> lock(&rq->lock); *** DEADLOCK *** 1 lock held by init/1: #0: (&rq->lock){-.-.-.}, at: [<c01a0756>] __schedule+0x5e/0x648 Call Trace: [<c019fe9e>] printk+0x0/0x4e [<c00368f8>] print_shortest_lock_dependencies+0x0/0x15c [<c0048628>] print_stack_trace+0x0/0x88 [<c0038912>] __lock_is_held+0x3e/0x5e [<c003b894>] lock_acquire+0x8a/0xcc [<c01a50c4>] _raw_spin_lock+0x44/0x7a [<c0009290>] switch_mm+0x22/0xc6 [<c01a06f8>] __schedule+0x0/0x648 [<c01a0d76>] schedule+0x36/0x7c [<c0037d04>] trace_hardirqs_on+0x0/0x1e [<c0004e18>] do_work_pending+0x30/0xd4 [<c000591a>] _work_pending+0xe/0x12 Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05CRISv32: enable LOCKDEP_SUPPORTRabin Vincent1-0/+4
Now that we have stack tracing and irq flags tracing support, we can also enable lockdep support Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05CRIS: add STACKTRACE_SUPPORTRabin Vincent4-0/+88
Add stacktrace support, which is required for lockdep and tracing. The stack tracing simply looks at all kernel text symbols found on the stack, similar to the trap stack dumping code, which can also be converted to use this. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05CRISv32: annotate irq enable in idle loopRabin Vincent1-2/+2
Use a call to local_irq_enable() instead of incline asm so that the irqsoff latency tracer knows that interrupts are enabled here. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05CRISv32: add support for irqflags tracingRabin Vincent3-1/+20
Add support irqflags tracing, which is required for things like lockdep and ftrace. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05CRIS: UAPI: use generic types.hRabin Vincent3-13/+1
CRIS' types.h is functionally identical to the asm-generic version. Effective diff: +#ifndef _ASM_GENERIC_TYPES_H +#define _ASM_GENERIC_TYPES_H + #include <asm-generic/int-ll64.h> + +#endif Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05CRIS: UAPI: use generic shmbuf.hRabin Vincent2-42/+1
CRIS' shmbuf.h is equivalent to the asm-generic verison. Effective diff: -#ifndef _CRIS_SHMBUF_H -#define _CRIS_SHMBUF_H +#ifndef __ASM_GENERIC_SHMBUF_H +#define __ASM_GENERIC_SHMBUF_H + +#include <asm/bitsperlong.h> struct ipc64_perm shm_perm; size_t shm_segsz; __kernel_time_t shm_atime; +#if __BITS_PER_LONG != 64 unsigned long __unused1; +#endif __kernel_time_t shm_dtime; +#if __BITS_PER_LONG != 64 unsigned long __unused2; +#endif __kernel_time_t shm_ctime; +#if __BITS_PER_LONG != 64 unsigned long __unused3; +#endif __kernel_pid_t shm_cpid; __kernel_pid_t shm_lpid; - unsigned long shm_nattch; - unsigned long __unused4; - unsigned long __unused5; + __kernel_ulong_t shm_nattch; + __kernel_ulong_t __unused4; + __kernel_ulong_t __unused5; }; struct shminfo64 { - unsigned long shmmax; - unsigned long shmmin; - unsigned long shmmni; - unsigned long shmseg; - unsigned long shmall; - unsigned long __unused1; - unsigned long __unused2; - unsigned long __unused3; - unsigned long __unused4; + __kernel_ulong_t shmmax; + __kernel_ulong_t shmmin; + __kernel_ulong_t shmmni; + __kernel_ulong_t shmseg; + __kernel_ulong_t shmall; + __kernel_ulong_t __unused1; + __kernel_ulong_t __unused2; + __kernel_ulong_t __unused3; + __kernel_ulong_t __unused4; }; #endif Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05CRIS: UAPI: use generic msgbuf.hRabin Vincent2-33/+1
CRIS' msgbuf.h is equivalent to the asm-generic version. Effective diff: -#ifndef _CRIS_MSGBUF_H -#define _CRIS_MSGBUF_H - - +#ifndef __ASM_GENERIC_MSGBUF_H +#define __ASM_GENERIC_MSGBUF_H +#include <asm/bitsperlong.h> struct msqid64_ds { struct ipc64_perm msg_perm; __kernel_time_t msg_stime; +#if __BITS_PER_LONG != 64 unsigned long __unused1; +#endif __kernel_time_t msg_rtime; +#if __BITS_PER_LONG != 64 unsigned long __unused2; +#endif __kernel_time_t msg_ctime; +#if __BITS_PER_LONG != 64 unsigned long __unused3; - unsigned long msg_cbytes; - unsigned long msg_qnum; - unsigned long msg_qbytes; +#endif + __kernel_ulong_t msg_cbytes; + __kernel_ulong_t msg_qnum; + __kernel_ulong_t msg_qbytes; __kernel_pid_t msg_lspid; __kernel_pid_t msg_lrpid; - unsigned long __unused4; - unsigned long __unused5; + __kernel_ulong_t __unused4; + __kernel_ulong_t __unused5; }; #endif Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05CRIS: UAPI: use generic socket.hRabin Vincent2-92/+1
CRIS' socket.h is equivalent to the asm-generic version. Effective diff: -#ifndef _ASM_SOCKET_H -#define _ASM_SOCKET_H - - +#ifndef __ASM_GENERIC_SOCKET_H +#define __ASM_GENERIC_SOCKET_H #include <asm/sockios.h> #define SO_LINGER 13 #define SO_BSDCOMPAT 14 #define SO_REUSEPORT 15 +#ifndef SO_PASSCRED #define SO_PASSCRED 16 #define SO_PEERCRED 17 #define SO_RCVLOWAT 18 #define SO_SNDLOWAT 19 #define SO_RCVTIMEO 20 #define SO_SNDTIMEO 21 +#endif #define SO_SECURITY_AUTHENTICATION 22 Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05CRIS: UAPI: use generic sembuf.hRabin Vincent2-25/+1
CRIS's sembuf.h is equivalent to the asm-generic version. Effective diff: -#ifndef _CRIS_SEMBUF_H -#define _CRIS_SEMBUF_H +#ifndef __ASM_GENERIC_SEMBUF_H +#define __ASM_GENERIC_SEMBUF_H +#include <asm/bitsperlong.h> struct semid64_ds { struct ipc64_perm sem_perm; __kernel_time_t sem_otime; +#if __BITS_PER_LONG != 64 unsigned long __unused1; +#endif __kernel_time_t sem_ctime; +#if __BITS_PER_LONG != 64 unsigned long __unused2; +#endif unsigned long sem_nsems; unsigned long __unused3; unsigned long __unused4; Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05CRIS: UAPI: use generic sockios.hRabin Vincent2-13/+1
CRIS' sockios.h is equivalent to the asm-generic version. Effective diff: -#ifndef __ARCH_CRIS_SOCKIOS__ -#define __ARCH_CRIS_SOCKIOS__ +#ifndef __ASM_GENERIC_SOCKIOS_H +#define __ASM_GENERIC_SOCKIOS_H Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05CRIS: UAPI: use generic auxvec.hRabin Vincent2-4/+1
CRIS's auxvec.h is empty just like the asm-generic version. Effective diff: -#ifndef __ASMCRIS_AUXVEC_H -#define __ASMCRIS_AUXVEC_H +#ifndef __ASM_GENERIC_AUXVEC_H +#define __ASM_GENERIC_AUXVEC_H + Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>