summaryrefslogtreecommitdiffstats
path: root/arch/c6x
AgeCommit message (Collapse)AuthorFilesLines
2020-06-10Merge tag 'clk-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This time around we have four lines of diff in the core framework, removing a function that isn't used anymore. Otherwise the main new thing for the common clk framework is that it is selectable in the Kconfig language now. Hopefully this will let clk drivers and clk consumers be testable on more than the architectures that support the clk framework. The goal is to introduce some Kunit tests for the framework. Outside of the core framework we have the usual set of various driver updates and non-critical fixes. The dirstat shows that the new Baikal-T1 driver is the largest addition this time around in terms of lines of code. After that the x86 (Intel), Qualcomm, and Mediatek drivers introduce many lines to support new or upcoming SoCs. After that the dirstat shows the usual suspects working on their SoC support by fixing minor bugs, correcting data and converting some of their DT bindings to YAML. Core: - Allow the COMMON_CLK config to be selectable New Drivers: - Clk driver for Baikal-T1 SoCs - Mediatek MT6765 clock support - Support for Intel Agilex clks - Add support for X1830 and X1000 Ingenic SoC clk controllers - Add support for the new Renesas RZ/G1H (R8A7742) SoC - Add support for Qualcomm's MSM8939 Generic Clock Controller Updates: - Support IDT VersaClock 5P49V5925 - Bunch of updates for HSDK clock generation unit (CGU) driver - Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver - Enable supply regulators for GPU gdscs on Qualcomm SoCs - Add support for Si5342, Si5344 and Si5345 chips - Support custom flags in Xilinx zynq firmware - Various small fixes to the Xilinx clk driver - A single minor rounding fix for the legacy Allwinner clock support - A few patches from Abel Vesa as preparation of adding audiomix clock support on i.MX - A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and clk-pllv3 drivers - Drop dependency on ARM64 for i.MX8M clock driver, to support aarch32 mode on aarch64 hardware - A series from Peng Fan to improve i.MX8M clock drivers, using composite clock for core and bus clk slice - Set a better parent clock for flexcan on i.MX6UL to support CiA102 defined bit rates - A couple changes for EMC frequency scaling on Tegra210 - Support for CPU frequency scaling on Tegra20/Tegra30 - New clk gate for CSI test pattern generator on Tegra210 - Regression fixes for Samsung exynos542x and exynos5433 SoCs - Use of fallthrough; attribute for Samsung s3c24xx - Updates and fixup HDMI and video clocks on Meson8b - Fixup reset polarity on Meson8b - Fix GPU glitch free mux switch on Meson gx and g12 - A minor fix for the currently unused suspend/resume handling on Renesas RZ/A1 and RZ/A2 - Two more conversions of Renesas DT bindings to json-schema - Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (155 commits) clk: mediatek: Remove ifr{0,1}_cfg_regs structures clk: baikal-t1: remove redundant assignment to variable 'divider' clk: baikal-t1: fix spelling mistake "Uncompatible" -> "Incompatible" dt-bindings: clock: Add a missing include to MMP Audio Clock binding dt: Add bindings for IDT VersaClock 5P49V5925 clk: vc5: Add support for IDT VersaClock 5P49V6965 clk: Add Baikal-T1 CCU Dividers driver clk: Add Baikal-T1 CCU PLLs driver dt-bindings: clk: Add Baikal-T1 CCU Dividers binding dt-bindings: clk: Add Baikal-T1 CCU PLLs binding clk: mediatek: assign the initial value to clk_init_data of mtk_mux clk: mediatek: Add MT6765 clock support clk: mediatek: add mt6765 clock IDs dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC CLK: HSDK: CGU: add support for 148.5MHz clock CLK: HSDK: CGU: support PLL bypassing CLK: HSDK: CGU: check if PLL is bypassed first clk: clk-si5341: Add support for the Si5345 series ...
2020-06-09mm: consolidate pte_index() and pte_offset_*() definitionsMike Rapoport1-1/+0
All architectures define pte_index() as (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1) and all architectures define pte_offset_kernel() as an entry in the array of PTEs indexed by the pte_index(). For the most architectures the pte_offset_kernel() implementation relies on the availability of pmd_page_vaddr() that converts a PMD entry value to the virtual address of the page containing PTEs array. Let's move x86 definitions of the PTE accessors to the generic place in <linux/pgtable.h> and then simply drop the respective definitions from the other architectures. The architectures that didn't provide pmd_page_vaddr() are updated to have that defined. The generic implementation of pte_offset_kernel() can be overridden by an architecture and alpha makes use of this because it has special ordering requirements for its version of pte_offset_kernel(). [rppt@linux.ibm.com: v2] Link: http://lkml.kernel.org/r/20200514170327.31389-11-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-12-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-13-rppt@kernel.org [akpm@linux-foundation.org: fix x86 warning] [sfr@canb.auug.org.au: fix powerpc build] Link: http://lkml.kernel.org/r/20200607153443.GB738695@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-10-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09mm: introduce include/linux/pgtable.hMike Rapoport1-2/+0
The include/linux/pgtable.h is going to be the home of generic page table manipulation functions. Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and make the latter include asm/pgtable.h. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09kernel: rename show_stack_loglvl() => show_stack()Dmitry Safonov1-6/+1
Now the last users of show_stack() got converted to use an explicit log level, show_stack_loglvl() can drop it's redundant suffix and become once again well known show_stack(). Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20200418201944.482088-51-dima@arista.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09c6x: add show_stack_loglvl()Dmitry Safonov1-7/+14
Currently, the log-level of show_stack() depends on a platform realization. It creates situations where the headers are printed with lower log level or higher than the stacktrace (depending on a platform or user). Furthermore, it forces the logic decision from user to an architecture side. In result, some users as sysrq/kdb/etc are doing tricks with temporary rising console_loglevel while printing their messages. And in result it not only may print unwanted messages from other CPUs, but also omit printing at all in the unlucky case where the printk() was deferred. Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier approach than introducing more printk buffers. Also, it will consolidate printings with headers. Introduce show_stack_loglvl(), that eventually will substitute show_stack(). [1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#u Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com> Cc: Mark Salter <msalter@redhat.com> Link: http://lkml.kernel.org/r/20200418201944.482088-12-dima@arista.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-08c6x: use asm-generic/cacheflush.hChristoph Hellwig1-18/+1
C6x needs almost no cache flushing routines of its own. Rely on asm-generic/cacheflush.h for the defaults. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com> Link: http://lkml.kernel.org/r/20200515143646.3857579-11-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03mm: free_area_init: use maximal zone PFNs rather than zone sizesMike Rapoport1-5/+3
Currently, architectures that use free_area_init() to initialize memory map and node and zone structures need to calculate zone and hole sizes. We can use free_area_init_nodes() instead and let it detect the zone boundaries while the architectures will only have to supply the possible limits for the zones. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Hoan Tran <hoan@os.amperecomputing.com> [arm64] Reviewed-by: Baoquan He <bhe@redhat.com> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200412194859.12663-5-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-29take the dummy csum_and_copy_from_user() into net/checksum.hAl Viro1-22/+0
now that can be done conveniently - all non-trivial cases have _HAVE_ARCH_COPY_AND_CSUM_FROM_USER defined, so the fallback in net/checksum.h is used only for dummy (copy_from_user, then csum_partial) implementation. Allowing us to get rid of all dummy instances, both of csum_and_copy_from_user() and csum_partial_copy_from_user(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-05clk: Allow the common clk framework to be selectableStephen Boyd1-0/+1
Enable build testing and configuration control of the common clk framework so that more code coverage and testing can be done on the common clk framework across various architectures. This also nicely removes the requirement that architectures must select the framework when they don't use it in architecture code. There's one snag with doing this, and that's making sure that randconfig builds don't select this option when some architecture or platform implements 'struct clk' outside of the common clk framework. Introduce a new config option 'HAVE_LEGACY_CLK' to indicate those platforms that haven't migrated to the common clk framework and therefore shouldn't be allowed to select this new config option. Also add a note that we hope one day to remove this config entirely. Based on a patch by Mark Brown <broonie@kernel.org>. Cc: Mark Brown <broonie@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Russell King <linux@armlinux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: <linux-mips@vger.kernel.org> Cc: <linux-c6x-dev@linux-c6x.org> Cc: <linux-m68k@lists.linux-m68k.org> Cc: <linux-arm-kernel@lists.infradead.org> Cc: <linux-sh@vger.kernel.org> Link: https://lore.kernel.org/r/1470915049-15249-1-git-send-email-broonie@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20200409064416.83340-8-sboyd@kernel.org Reviewed-by: Mark Brown <broonie@kernel.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2020-04-10mm/vma: define a default value for VM_DATA_DEFAULT_FLAGSAnshuman Khandual1-4/+1
There are many platforms with exact same value for VM_DATA_DEFAULT_FLAGS This creates a default value for VM_DATA_DEFAULT_FLAGS in line with the existing VM_STACK_DEFAULT_FLAGS. While here, also define some more macros with standard VMA access flag combinations that are used frequently across many platforms. Apart from simplification, this reduces code duplication as well. Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Salter <msalter@redhat.com> Cc: Guo Ren <guoren@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Brian Cain <bcain@codeaurora.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paulburton@kernel.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Rich Felker <dalias@libc.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jeff Dike <jdike@addtoit.com> Cc: Chris Zankel <chris@zankel.net> Link: http://lkml.kernel.org/r/1583391014-8170-2-git-send-email-anshuman.khandual@arm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-64/+1
Pull SCSI updates from James Bottomley: "This series has a huge amount of churn because it pulls in Mauro's doc update changing all our txt files to rst ones. Excluding that, we have the usual driver updates (qla2xxx, ufs, lpfc, zfcp, ibmvfc, pm80xx, aacraid), a treewide update for scnprintf and some other minor updates. The major core change is Hannes moving functions out of the aacraid driver and into the core" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (223 commits) scsi: aic7xxx: aic97xx: Remove FreeBSD-specific code scsi: ufs: Do not rely on prefetched data scsi: dc395x: remove dc395x_bios_param scsi: libiscsi: Fix error count for active session scsi: hpsa: correct race condition in offload enabled scsi: message: fusion: Replace zero-length array with flexible-array member scsi: qedi: Add PCI shutdown handler support scsi: qedi: Add MFW error recovery process scsi: ufs: Enable block layer runtime PM for well-known logical units scsi: ufs-qcom: Override devfreq parameters scsi: ufshcd: Let vendor override devfreq parameters scsi: ufshcd: Update the set frequency to devfreq scsi: ufs: Resume ufs host before accessing ufs device scsi: ufs-mediatek: customize the delay for enabling host scsi: ufs: make HCE polling more compact to improve initialization latency scsi: ufs: allow custom delay prior to host enabling scsi: ufs-mediatek: use common delay function scsi: ufs: introduce common and flexible delay function scsi: ufs: use an enum for host capabilities scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc() ...
2020-04-02asm-generic: make more kernel-space headers mandatoryMasahiro Yamada1-37/+0
Change a header to mandatory-y if both of the following are met: [1] At least one architecture (except um) specifies it as generic-y in arch/*/include/asm/Kbuild [2] Every architecture (except um) either has its own implementation (arch/*/include/asm/*.h) or specifies it as generic-y in arch/*/include/asm/Kbuild This commit was generated by the following shell script. ----------------------------------->8----------------------------------- arches=$(cd arch; ls -1 | sed -e '/Kconfig/d' -e '/um/d') tmpfile=$(mktemp) grep "^mandatory-y +=" include/asm-generic/Kbuild > $tmpfile find arch -path 'arch/*/include/asm/Kbuild' | xargs sed -n 's/^generic-y += \(.*\)/\1/p' | sort -u | while read header do mandatory=yes for arch in $arches do if ! grep -q "generic-y += $header" arch/$arch/include/asm/Kbuild && ! [ -f arch/$arch/include/asm/$header ]; then mandatory=no break fi done if [ "$mandatory" = yes ]; then echo "mandatory-y += $header" >> $tmpfile for arch in $arches do sed -i "/generic-y += $header/d" arch/$arch/include/asm/Kbuild done fi done sed -i '/^mandatory-y +=/d' include/asm-generic/Kbuild LANG=C sort $tmpfile >> include/asm-generic/Kbuild ----------------------------------->8----------------------------------- One obvious benefit is the diff stat: 25 files changed, 52 insertions(+), 557 deletions(-) It is tedious to list generic-y for each arch that needs it. So, mandatory-y works like a fallback default (by just wrapping asm-generic one) when arch does not have a specific header implementation. See the following commits: def3f7cefe4e81c296090e1722a76551142c227c a1b39bae16a62ce4aae02d958224f19316d98b24 It is tedious to convert headers one by one, so I processed by a shell script. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Arnd Bergmann <arnd@arndb.de> Link: http://lkml.kernel.org/r/20200210175452.5030-1-masahiroy@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-29c6x: Replace setup_irq() by request_irq()afzal mohammed1-8/+3
request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready. setup_irq() was required in older kernels as the memory allocator was not available during early boot. Hence replace setup_irq() by request_irq(). Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/56e991e920ce5806771fab892574cba89a3d413f.1585320721.git.afzal.mohd.ma@gmail.com
2020-03-16scsi: c6x: Include <linux/unaligned/generic.h> instead of duplicating itBart Van Assche1-64/+1
Use the generic __{get,put}_unaligned_[bl]e() definitions instead of duplicating these. Since a later patch will add more definitions into <linux/unaligned/generic.h>, this patch ensures that these definitions have to be added only once. See also commit a7f626c1948a ("C6X: headers"). See also commit 6510d41954dc ("kernel: Move arches to use common unaligned access"). Link: https://lore.kernel.org/r/20200313203102.16613-3-bvanassche@acm.org Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Mark Salter <msalter@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-28Merge branch 'sched-core-for-linus' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "These were the main changes in this cycle: - More -rt motivated separation of CONFIG_PREEMPT and CONFIG_PREEMPTION. - Add more low level scheduling topology sanity checks and warnings to filter out nonsensical topologies that break scheduling. - Extend uclamp constraints to influence wakeup CPU placement - Make the RT scheduler more aware of asymmetric topologies and CPU capacities, via uclamp metrics, if CONFIG_UCLAMP_TASK=y - Make idle CPU selection more consistent - Various fixes, smaller cleanups, updates and enhancements - please see the git log for details" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits) sched/fair: Define sched_idle_cpu() only for SMP configurations sched/topology: Assert non-NUMA topology masks don't (partially) overlap idle: fix spelling mistake "iterrupts" -> "interrupts" sched/fair: Remove redundant call to cpufreq_update_util() sched/psi: create /proc/pressure and /proc/pressure/{io|memory|cpu} only when psi enabled sched/fair: Fix sgc->{min,max}_capacity calculation for SD_OVERLAP sched/fair: calculate delta runnable load only when it's needed sched/cputime: move rq parameter in irqtime_account_process_tick stop_machine: Make stop_cpus() static sched/debug: Reset watchdog on all CPUs while processing sysrq-t sched/core: Fix size of rq::uclamp initialization sched/uclamp: Fix a bug in propagating uclamp value in new cgroups sched/fair: Load balance aggressively for SCHED_IDLE CPUs sched/fair : Improve update_sd_pick_busiest for spare capacity case watchdog: Remove soft_lockup_hrtimer_cnt and related code sched/rt: Make RT capacity-aware sched/fair: Make EAS wakeup placement consider uclamp restrictions sched/fair: Make task_fits_capacity() consider uclamp restrictions sched/uclamp: Rename uclamp_util_with() into uclamp_rq_util_with() sched/uclamp: Make uclamp util helpers use and return UL values ...
2019-12-25Merge tag 'v5.5-rc3' into sched/core, to pick up fixesIngo Molnar1-1/+1
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-12-10mm/vmalloc: Add empty <asm/vmalloc.h> headers and use them from ↵Ingo Molnar1-0/+4
<linux/vmalloc.h> In the x86 MM code we'd like to untangle various types of historic header dependency spaghetti, but for this we'd need to pass to the generic vmalloc code various vmalloc related defines that customarily come via the <asm/page.h> low level arch header. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-12-08sched/rt, c6x: Use CONFIG_PREEMPTIONThomas Gleixner1-4/+4
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT. Both PREEMPT and PREEMPT_RT require the same functionality which today depends on CONFIG_PREEMPT. Switch the entry code over to use CONFIG_PREEMPTION. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Salter <msalter@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-c6x-dev@linux-c6x.org Link: https://lore.kernel.org/r/20191015191821.11479-6-bigeasy@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-12-04c6x: use pgtable-nopud instead of 4level-fixupMike Rapoport1-1/+1
c6x is a nommu architecture and does not require fixup for upper layers of the page tables because it is already handled by the generic nommu implementation. Replace usage of include/asm-generic/4level-fixup.h with include/asm-generic/pgtable-nopud.h Link: http://lkml.kernel.org/r/1572938135-31886-4-git-send-email-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Anatoly Pugachev <matorola@gmail.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Peter Rosin <peda@axentia.se> Cc: Richard Weinberger <richard@nod.at> Cc: Rolf Eike Beer <eike-kernel@sf-tec.de> Cc: Russell King <linux@armlinux.org.uk> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Sam Creasey <sammy@sammy.net> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-11-28Merge branch 'master' of ↵Linus Torvalds1-7/+7
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux; tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - improve dma-debug scalability (Eric Dumazet) - tiny dma-debug cleanup (Dan Carpenter) - check for vmap memory in dma_map_single (Kees Cook) - check for dma_addr_t overflows in dma-direct when using DMA offsets (Nicolas Saenz Julienne) - switch the x86 sta2x11 SOC to use more generic DMA code (Nicolas Saenz Julienne) - fix arm-nommu dma-ranges handling (Vladimir Murzin) - use __initdata in CMA (Shyam Saini) - replace the bus dma mask with a limit (Nicolas Saenz Julienne) - merge the remapping helpers into the main dma-direct flow (me) - switch xtensa to the generic dma remap handling (me) - various cleanups around dma_capable (me) - remove unused dev arguments to various dma-noncoherent helpers (me) * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux: * tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping: (22 commits) dma-mapping: treat dev->bus_dma_mask as a DMA limit dma-direct: exclude dma_direct_map_resource from the min_low_pfn check dma-direct: don't check swiotlb=force in dma_direct_map_resource dma-debug: clean up put_hash_bucket() powerpc: remove support for NULL dev in __phys_to_dma / __dma_to_phys dma-direct: avoid a forward declaration for phys_to_dma dma-direct: unify the dma_capable definitions dma-mapping: drop the dev argument to arch_sync_dma_for_* x86/PCI: sta2x11: use default DMA address translation dma-direct: check for overflows on 32 bit DMA addresses dma-debug: increase HASH_SIZE dma-debug: reorder struct dma_debug_entry fields xtensa: use the generic uncached segment support dma-mapping: merge the generic remapping helpers into dma-direct dma-direct: provide mmap and get_sgtable method overrides dma-direct: remove the dma_handle argument to __dma_direct_alloc_pages dma-direct: remove __dma_direct_free_pages usb: core: Remove redundant vmap checks kernel: dma-contiguous: mark CMA parameters __initdata/__initconst dma-debug: add a schedule point in debug_dma_dump_mappings() ...
2019-11-20dma-mapping: drop the dev argument to arch_sync_dma_for_*Christoph Hellwig1-7/+7
These are pure cache maintainance routines, so drop the unused struct device argument. Signed-off-by: Christoph Hellwig <hch@lst.de> Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2019-11-04c6x: Move EXCEPTION_TABLE to RO_DATA segmentKees Cook1-2/+3
Since the EXCEPTION_TABLE is read-only, collapse it into RO_DATA. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux-alpha@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-c6x-dev@linux-c6x.org Cc: linux-ia64@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-s390@vger.kernel.org Cc: Mark Salter <msalter@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Rick Edgecombe <rick.p.edgecombe@intel.com> Cc: Segher Boessenkool <segher@kernel.crashing.org> Cc: Will Deacon <will@kernel.org> Cc: x86-ml <x86@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20191029211351.13243-20-keescook@chromium.org
2019-11-04vmlinux.lds.h: Replace RO_DATA_SECTION with RO_DATAKees Cook1-1/+1
Finish renaming RO_DATA_SECTION to RO_DATA. (Calling this a "section" is a lie, since it's multiple sections and section flags cannot be applied to the macro.) Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> # s390 Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: linux-alpha@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-c6x-dev@linux-c6x.org Cc: linux-ia64@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Rick Edgecombe <rick.p.edgecombe@intel.com> Cc: Segher Boessenkool <segher@kernel.crashing.org> Cc: Will Deacon <will@kernel.org> Cc: x86-ml <x86@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20191029211351.13243-13-keescook@chromium.org
2019-11-04vmlinux.lds.h: Move NOTES into RO_DATAKees Cook1-1/+0
The .notes section should be non-executable read-only data. As such, move it to the RO_DATA macro instead of being per-architecture defined. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> # s390 Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: linux-alpha@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-c6x-dev@linux-c6x.org Cc: linux-ia64@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Rick Edgecombe <rick.p.edgecombe@intel.com> Cc: Segher Boessenkool <segher@kernel.crashing.org> Cc: Will Deacon <will@kernel.org> Cc: x86-ml <x86@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20191029211351.13243-11-keescook@chromium.org
2019-09-24mm: consolidate pgtable_cache_init() and pgd_cache_init()Mike Rapoport1-5/+0
Both pgtable_cache_init() and pgd_cache_init() are used to initialize kmem cache for page table allocations on several architectures that do not use PAGE_SIZE tables for one or more levels of the page table hierarchy. Most architectures do not implement these functions and use __weak default NOP implementation of pgd_cache_init(). Since there is no such default for pgtable_cache_init(), its empty stub is duplicated among most architectures. Rename the definitions of pgd_cache_init() to pgtable_cache_init() and drop empty stubs of pgtable_cache_init(). Link: http://lkml.kernel.org/r/1566457046-22637-1-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Will Deacon <will@kernel.org> [arm64] Acked-by: Thomas Gleixner <tglx@linutronix.de> [x86] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-04dma-mapping: remove CONFIG_ARCH_NO_COHERENT_DMA_MMAPChristoph Hellwig1-1/+0
CONFIG_ARCH_NO_COHERENT_DMA_MMAP is now functionally identical to !CONFIG_MMU, so remove the separate symbol. The only difference is that arm did not set it for !CONFIG_MMU, but arm uses a separate dma mapping implementation including its own mmap method, which is handled by moving the CONFIG_MMU check in dma_can_mmap so that is only applies to the dma-direct case, just as the other ifdefs for it. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
2019-07-10Merge branch 'for-next' of ↵Linus Torvalds2-6/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68nommu updates from Greg Ungerer: "A series of cleanups for the FLAT format binary loader, binfmt_flat, from Christoph. The end goal is to support no-MMU on RISC-V, and the last patch enables that" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: riscv: add binfmt_flat support binfmt_flat: don't offset the data start binfmt_flat: move the MAX_SHARED_LIBS definition to binfmt_flat.c binfmt_flat: remove the persistent argument from flat_get_addr_from_rp binfmt_flat: provide an asm-generic/flat.h binfmt_flat: make support for old format binaries optional binfmt_flat: add a ARCH_HAS_BINFMT_FLAT option binfmt_flat: add endianess annotations binfmt_flat: use fixed size type for the on-disk format binfmt_flat: consolidate two version of flat_v2_reloc_t binfmt_flat: remove the unused OLD_FLAT_FLAG_RAM definition binfmt_flat: remove the uapi <linux/flat.h> header binfmt_flat: replace flat_argvp_envp_on_stack with a Kconfig variable binfmt_flat: remove flat_old_ram_flag binfmt_flat: provide a default version of flat_get_relocate_addr binfmt_flat: remove flat_set_persistent binfmt_flat: remove flat_reloc_valid
2019-07-09Merge tag 'docs-5.3' of git://git.lwn.net/linuxLinus Torvalds1-1/+1
Pull Documentation updates from Jonathan Corbet: "It's been a relatively busy cycle for docs: - A fair pile of RST conversions, many from Mauro. These create more than the usual number of simple but annoying merge conflicts with other trees, unfortunately. He has a lot more of these waiting on the wings that, I think, will go to you directly later on. - A new document on how to use merges and rebases in kernel repos, and one on Spectre vulnerabilities. - Various improvements to the build system, including automatic markup of function() references because some people, for reasons I will never understand, were of the opinion that :c:func:``function()`` is unattractive and not fun to type. - We now recommend using sphinx 1.7, but still support back to 1.4. - Lots of smaller improvements, warning fixes, typo fixes, etc" * tag 'docs-5.3' of git://git.lwn.net/linux: (129 commits) docs: automarkup.py: ignore exceptions when seeking for xrefs docs: Move binderfs to admin-guide Disable Sphinx SmartyPants in HTML output doc: RCU callback locks need only _bh, not necessarily _irq docs: format kernel-parameters -- as code Doc : doc-guide : Fix a typo platform: x86: get rid of a non-existent document Add the RCU docs to the core-api manual Documentation: RCU: Add TOC tree hooks Documentation: RCU: Rename txt files to rst Documentation: RCU: Convert RCU UP systems to reST Documentation: RCU: Convert RCU linked list to reST Documentation: RCU: Convert RCU basic concepts to reST docs: filesystems: Remove uneeded .rst extension on toctables scripts/sphinx-pre-install: fix out-of-tree build docs: zh_CN: submitting-drivers.rst: Remove a duplicated Documentation/ Documentation: PGP: update for newer HW devices Documentation: Add section about CPU vulnerabilities for Spectre Documentation: platform: Delete x86-laptop-drivers.txt docs: Note that :c:func: should no longer be used ...
2019-07-08Merge branch 'siginfo-linus' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull force_sig() argument change from Eric Biederman: "A source of error over the years has been that force_sig has taken a task parameter when it is only safe to use force_sig with the current task. The force_sig function is built for delivering synchronous signals such as SIGSEGV where the userspace application caused a synchronous fault (such as a page fault) and the kernel responded with a signal. Because the name force_sig does not make this clear, and because the force_sig takes a task parameter the function force_sig has been abused for sending other kinds of signals over the years. Slowly those have been fixed when the oopses have been tracked down. This set of changes fixes the remaining abusers of force_sig and carefully rips out the task parameter from force_sig and friends making this kind of error almost impossible in the future" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits) signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus signal: Remove the signal number and task parameters from force_sig_info signal: Factor force_sig_info_to_task out of force_sig_info signal: Generate the siginfo in force_sig signal: Move the computation of force into send_signal and correct it. signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal signal: Remove the task parameter from force_sig_fault signal: Use force_sig_fault_to_task for the two calls that don't deliver to current signal: Explicitly call force_sig_fault on current signal/unicore32: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from ptrace_break signal/nds32: Remove tsk parameter from send_sigtrap signal/riscv: Remove tsk parameter from do_trap signal/sh: Remove tsk parameter from force_sig_info_fault signal/um: Remove task parameter from send_sigtrap signal/x86: Remove task parameter from send_sigtrap signal: Remove task parameter from force_sig_mceerr signal: Remove task parameter from force_sig signal: Remove task parameter from force_sigsegv ...
2019-06-24binfmt_flat: remove the persistent argument from flat_get_addr_from_rpChristoph Hellwig1-1/+1
The argument is never used. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2019-06-24binfmt_flat: add a ARCH_HAS_BINFMT_FLAT optionChristoph Hellwig1-0/+1
Allow architectures to opt into ARCH_HAS_BINFMT_FLAT support instead of assuming that all nommu ports support the format. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2019-06-24binfmt_flat: replace flat_argvp_envp_on_stack with a Kconfig variableChristoph Hellwig1-1/+0
This will eventually allow us to kill the need for an <asm/flat.h> for many cases. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2019-06-24binfmt_flat: remove flat_old_ram_flagChristoph Hellwig1-1/+0
Instead add a Kconfig variable that only h8300 selects. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2019-06-24binfmt_flat: provide a default version of flat_get_relocate_addrChristoph Hellwig1-1/+0
This way only the two architectures that do masking need to provide the helper. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2019-06-24binfmt_flat: remove flat_set_persistentChristoph Hellwig1-1/+0
This helper is a no-op on all architectures, remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2019-06-24binfmt_flat: remove flat_reloc_validChristoph Hellwig1-1/+0
This helper is the same for all architectures, open code it in the only caller. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner51-211/+51
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-14docs: kbuild: convert docs to ReST and rename to *.rstMauro Carvalho Chehab1-1/+1
The kbuild documentation clearly shows that the documents there are written at different times: some use markdown, some use their own peculiar logic to split sections. Convert everything to ReST without affecting too much the author's style and avoiding adding uneeded markups. The conversion is actually: - add blank lines and identation in order to identify paragraphs; - fix tables markups; - add some lists markups; - mark literal blocks; - adjust title markups. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-05-30treewide: Add SPDX license identifier - KbuildGreg Kroah-Hartman2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0 Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156Thomas Gleixner15-195/+15
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner9-49/+9
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-29signal: Remove the task parameter from force_sig_faultEric W. Biederman1-1/+1
As synchronous exceptions really only make sense against the current task (otherwise how are you synchronous) remove the task parameter from from force_sig_fault to make it explicit that is what is going on. The two known exceptions that deliver a synchronous exception to a stopped ptraced task have already been changed to force_sig_fault_to_task. The callers have been changed with the following emacs regular expression (with obvious variations on the architectures that take more arguments) to avoid typos: force_sig_fault[(]\([^,]+\)[,]\([^,]+\)[,]\([^,]+\)[,]\W+current[)] -> force_sig_fault(\1,\2,\3) Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-27signal: Remove task parameter from force_sigEric W. Biederman1-1/+1
All of the remaining callers pass current into force_sig so remove the task parameter to make this obvious and to make misuse more difficult in the future. This also makes it clear force_sig passes current into force_sig_info. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 36Thomas Gleixner1-5/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public licence as published by the free software foundation either version 2 of the licence or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 114 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520170857.552531963@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner3-0/+3
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-16Merge tag 'asm-generic-nommu' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull nommu generic uaccess updates from Arnd Bergmann: "asm-generic: kill <asm/segment.h> and improve nommu generic uaccess helpers Christoph Hellwig writes: This is a series doing two somewhat interwinded things. It improves the asm-generic nommu uaccess helper to optionally be entirely generic and not require any arch helpers for the actual uaccess. For the generic uaccess.h to actually be generically useful I also had to kill off the mess we made of <asm/segment.h>, which really shouldn't exist on most architectures" * tag 'asm-generic-nommu' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: asm-generic: optimize generic uaccess for 8-byte loads and stores asm-generic: provide entirely generic nommu uaccess arch: mostly remove <asm/segment.h> asm-generic: don't include <asm/segment.h> from <asm/uaccess.h>
2019-05-14init: provide a generic free_initmem implementationMike Rapoport1-5/+0
Patch series "provide a generic free_initmem implementation", v2. Many architectures implement free_initmem() in exactly the same or very similar way: they wrap the call to free_initmem_default() with sometimes different 'poison' parameter. These patches switch those architectures to use a generic implementation that does free_initmem_default(POISON_FREE_INITMEM). This was inspired by Christoph's patches for free_initrd_mem [1] and I shamelessly copied changelog entries from his patches :) [1] https://lore.kernel.org/lkml/20190213174621.29297-1-hch@lst.de/ This patch (of 2): For most architectures free_initmem just a wrapper for the same free_initmem_default(-1) call. Provide that as a generic implementation marked __weak. Link: http://lkml.kernel.org/r/1550515285-17446-2-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Richard Kuo <rkuo@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14initramfs: provide a generic free_initrd_mem implementationChristoph Hellwig1-7/+0
For most architectures free_initrd_mem just expands to the same free_reserved_area call. Provide that as a generic implementation marked __weak. Link: http://lkml.kernel.org/r/20190213174621.29297-8-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> [arm64] Cc: Steven Price <steven.price@arm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-07Merge tag 'audit-pr-20190507' of ↵Linus Torvalds1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit updates from Paul Moore: "We've got a reasonably broad set of audit patches for the v5.2 merge window, the highlights are below: - The biggest change, and the source of all the arch/* changes, is the patchset from Dmitry to help enable some of the work he is doing around PTRACE_GET_SYSCALL_INFO. To be honest, including this in the audit tree is a bit of a stretch, but it does help move audit a little further along towards proper syscall auditing for all arches, and everyone else seemed to agree that audit was a "good" spot for this to land (or maybe they just didn't want to merge it? dunno.). - We can now audit time/NTP adjustments. - We continue the work to connect associated audit records into a single event" * tag 'audit-pr-20190507' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: (21 commits) audit: fix a memory leak bug ntp: Audit NTP parameters adjustment timekeeping: Audit clock adjustments audit: purge unnecessary list_empty calls audit: link integrity evm_write_xattrs record to syscall event syscall_get_arch: add "struct task_struct *" argument unicore32: define syscall_get_arch() Move EM_UNICORE to uapi/linux/elf-em.h nios2: define syscall_get_arch() nds32: define syscall_get_arch() Move EM_NDS32 to uapi/linux/elf-em.h m68k: define syscall_get_arch() hexagon: define syscall_get_arch() Move EM_HEXAGON to uapi/linux/elf-em.h h8300: define syscall_get_arch() c6x: define syscall_get_arch() arc: define syscall_get_arch() Move EM_ARCOMPACT and EM_ARCV2 to uapi/linux/elf-em.h audit: Make audit_log_cap and audit_copy_inode static audit: connect LOGIN record to its syscall record ...
2019-05-06Merge tag 'arm64-mmiowb' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull mmiowb removal from Will Deacon: "Remove Mysterious Macro Intended to Obscure Weird Behaviours (mmiowb()) Remove mmiowb() from the kernel memory barrier API and instead, for architectures that need it, hide the barrier inside spin_unlock() when MMIO has been performed inside the critical section. The only relatively recent changes have been addressing review comments on the documentation, which is in a much better shape thanks to the efforts of Ben and Ingo. I was initially planning to split this into two pull requests so that you could run the coccinelle script yourself, however it's been plain sailing in linux-next so I've just included the whole lot here to keep things simple" * tag 'arm64-mmiowb' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (23 commits) docs/memory-barriers.txt: Update I/O section to be clearer about CPU vs thread docs/memory-barriers.txt: Fix style, spacing and grammar in I/O section arch: Remove dummy mmiowb() definitions from arch code net/ethernet/silan/sc92031: Remove stale comment about mmiowb() i40iw: Redefine i40iw_mmiowb() to do nothing scsi/qla1280: Remove stale comment about mmiowb() drivers: Remove explicit invocations of mmiowb() drivers: Remove useless trailing comments from mmiowb() invocations Documentation: Kill all references to mmiowb() riscv/mmiowb: Hook up mmwiob() implementation to asm-generic code powerpc/mmiowb: Hook up mmwiob() implementation to asm-generic code ia64/mmiowb: Add unconditional mmiowb() to arch_spin_unlock() mips/mmiowb: Add unconditional mmiowb() to arch_spin_unlock() sh/mmiowb: Add unconditional mmiowb() to arch_spin_unlock() m68k/io: Remove useless definition of mmiowb() nds32/io: Remove useless definition of mmiowb() x86/io: Remove useless definition of mmiowb() arm64/io: Remove useless definition of mmiowb() ARM/io: Remove useless definition of mmiowb() mmiowb: Hook up mmiowb helpers to spinlocks and generic I/O accessors ...