summaryrefslogtreecommitdiffstats
path: root/arch/blackfin/mach-bf537
AgeCommit message (Collapse)AuthorFilesLines
2013-05-07Platform Nand: Set the GPIO for NAND read as inputAaron Wu1-0/+1
This patch is from Frank.Shew,fshew@geometrics.com to fix the following problem:having extremely slow responses with the NAND due to timeouts on the ready status signal, which eventually caused the watchdog to time out. Signed-off-by: Aaron Wu <Aaron.Wu@analog.com> Signed-off-by: Steven Miao <realmz6@gmail.com>
2012-12-13blackfin: anomaly: add anomaly 16000030 for bf5xxSonic Zhang1-0/+1
Drivers common to both bf5xx and bf60x chip families may use this anomaly id. So add it to bf5xx header files also. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-10-09Merge branch 'for-linus' of ↵Linus Torvalds2-6/+126
git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin Pull blackfin update from Bob Liu. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin: Blackfin: smp: add smp_mb() to keep coherency Blackfin: drop irq enable in init_arch_irq() Blackfin: fix wrong place disabled irq Blackfin: update defconfig for bf609-ezkit Blackfin: add bf548 v0.4 revision Blackfin: bf60x: Add bf608 and bf609 specific perpheral MMRs Blackfin: cpufreq: fix dpm_state_table Blackfin: bfin_gpio: proc: fix return value Blackfin: CM-BF537E: Update SPORT support in board file. Blackfin: bf537: fix lq035 platform device name Blackfin: bf533-ezkit: enable flash drivers by default
2012-10-08Blackfin: CM-BF537E: Update SPORT support in board file.Harald Krapfenbauer1-5/+125
Signed-off-by: Harald Krapfenbauer <harald.krapfenbauer@bluetechnix.at> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-10-08Blackfin: bf537: fix lq035 platform device nameScott Jiang1-1/+1
Lq035 fb driver uses KBUILD_MODNAME which is bf537_lq035 instead of bf537-lq035. Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-08-17blackfin: add platform device for ad1836 machine driverScott Jiang1-0/+20
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-16arch: Use eth_random_addrJoe Perches1-1/+1
Convert the existing uses of random_ether_addr to the new eth_random_addr. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-21blackfin: twi: Move TWI peripheral pin request array to platform dataSonic Zhang6-0/+30
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21blackfin: license: Change ADI BSD licenseSonic Zhang3-4/+3
Change ADI BSD license to standart 3 clause BSD license for some blackfin arch code requested by ADI Legal. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21blackfin: bf537-stamp: update board file for platform bfin_sport deviceAaron Wu1-8/+53
Blackfin sport driver has been rewrited update board file according. Signed-off-by: Aaron Wu <Aaron.Wu@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21blackfin: twi: move twi bit mask macro to twi head fileSonic Zhang1-69/+0
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-03-21Blackfin: pnav: delete duplicate linux/export.h includeDanny Kukawka1-1/+0
arch/blackfin/mach-bf537/boards/pnav10.c includes 'linux/export.h' twice. No need to include the file a second time in a #ifdef block if already included at top. Remove the duplicate. Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-03-21arch/blackfin: don't generate random mac in bfin_get_ether_addr()Danny Kukawka6-14/+12
Changed bfin_get_ether_addr() to return a state and to set no random mac address if the board don't provide one. Let the caller of bfin_get_ether_addr() set a random mac address if the return value is not 0. v2: don't set random mac in bfin_get_ether_addr() Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-03-21bfin: add bfin_ad73311_machine platform deviceBob Liu1-0/+20
we can pass sport enable pin through platform data if customer board has reset pin, add it in ad73311_gpio array and modify id to 2 Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-03-21blackfin: bf537: stamp: update board file for 193xBob Liu1-2/+2
Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-01-09blackfin: bf537: add capture supportBob Liu1-0/+70
Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-01-09blackfin: bf537: change num_chipselect for spi-sportScott Jiang1-2/+2
spi sport driver can support any gpio as its cs pin. Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-01-09blackfin: config: update macro SPI_BFIN in board fileSonic Zhang7-19/+19
Macro name for spi controller driver has been modified, so update default board file accordingly. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2011-11-14blackfin: Fixup export.h includesLars-Peter Clausen6-5/+6
Commit 8dc7a9c84 ("blackfin: Add export.h to files using EXPORT_SYMBOL/THIS_MODULE") inserted some of the include statements into sections protected by an unrelated #if CONFIG_... statement. This can cause, depending on the configuration used, warnings like this one: arch/blackfin/mach-bf537/boards/stamp.c:2940: warning: data definition has no type or storage class arch/blackfin/mach-bf537/boards/stamp.c:2940: warning: type defaults to ‘int’ in declaration of ‘EXPORT_SYMBOL’ arch/blackfin/mach-bf537/boards/stamp.c:2940: warning: parameter names (without types) in function declaration This patch fixes it by moving the includes out of the #if protected sections. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2011-11-14Blackfin: add serial TX IRQ in individual platform resourceSonic Zhang7-14/+84
The serial TX IRQ is not simply (RX IRQ + 1) on some Blackfin chips, so move the values to the platform resources. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2011-10-31blackfin: Add export.h to files using EXPORT_SYMBOL/THIS_MODULEPaul Gortmaker6-0/+6
These particular files were just assuming that module.h was somehow in the include paths. Give them the more minimalist header file explicitly. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-26Blackfin: irq: remove IRQF_DISABLEDYong Zhang4-4/+4
This flag is a NOOP and can be removed now. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Acked-by: Bob Liu <lliubbo@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-25Blackfin: boards: clean up i2c_board_infoMichael Hennerich1-28/+0
Remove i2c_board_info for driver that doesn't exist anymore. Delete irq_flags for drivers that don't use them anymore. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-25Blackfin: bf537-stamp: register ASoC EVAL-ADAU1373 board driverLars-Peter Clausen1-0/+12
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-25Blackfin: bf537-stamp: Register adav801 codec and ASoC machine driverLars-Peter Clausen1-3/+16
There is already an entry in the spi device table for the codec, but the modalias was wrong. Also the config symbol name for the codec is wrong, so this is fixed as well. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-25Blackfin: bf537-stamp: register adau1701 codec and asoc machine driverLars-Peter Clausen1-0/+17
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-25Blackfin: bf537-stamp: fix ad73311 codec config macroScott Jiang1-2/+2
SND_BF5XX_SOC is for machine drivers while SND_SOC is for codec drivers. Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-25Blackfin: bf537-stamp: fix ad1836 nameScott Jiang1-3/+3
The ASoC codec name is "ad1836" and not "ad183x" as the change to rename things ultimately did not get merged. Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23Blackfin: boards: fix pcm device nameScott Jiang1-6/+28
The pcm driver name has been changed, but the device name has not. Signed-off-by: Scott Jiang <scott.jiang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23Blackfin: update anomaly lists to latest public infoMike Frysinger1-11/+23
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23Blackfin: boards: clean up redundant/dead spi resourcesMike Frysinger7-247/+0
The default for the Blackfin SPI driver is 8 bits and dma disabled, so many of the bfin5xx_spi_chip resources are redundant. So punt those parts. Further, drivers should themselves be declaring 16 bit transfers, so for those that do, and for the ones which no longer do 16 bit transfers, drop the bfin5xx_spi_chip resources. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23Blackfin: net2272: move pin setup to boards filesMike Frysinger4-0/+102
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-28Blackfin: mach/bfin_serial_5xx.h: punt now-unused headerMike Frysinger1-79/+0
Now that the serial code has been unified in bfin_serial.h, and the Blackfin UART driver pushed its resources to the boards files, we don't need these headers anymore. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-27Merge git://git.infradead.org/mtd-2.6Linus Torvalds1-4/+0
* git://git.infradead.org/mtd-2.6: (97 commits) mtd: kill CONFIG_MTD_PARTITIONS mtd: remove add_mtd_partitions, add_mtd_device and friends mtd: convert remaining users to mtd_device_register() mtd: samsung onenand: convert to mtd_device_register() mtd: omap2 onenand: convert to mtd_device_register() mtd: txx9ndfmc: convert to mtd_device_register() mtd: tmio_nand: convert to mtd_device_register() mtd: socrates_nand: convert to mtd_device_register() mtd: sharpsl: convert to mtd_device_register() mtd: s3c2410 nand: convert to mtd_device_register() mtd: ppchameleonevb: convert to mtd_device_register() mtd: orion_nand: convert to mtd_device_register() mtd: omap2: convert to mtd_device_register() mtd: nomadik_nand: convert to mtd_device_register() mtd: ndfc: convert to mtd_device_register() mtd: mxc_nand: convert to mtd_device_register() mtd: mpc5121_nfc: convert to mtd_device_register() mtd: jz4740_nand: convert to mtd_device_register() mtd: h1910: convert to mtd_device_register() mtd: fsmc_nand: convert to mtd_device_register() ... Fixed up trivial conflicts in - drivers/mtd/maps/integrator-flash.c: removed in ARM tree - drivers/mtd/maps/physmap.c: addition of afs partition probe type clashing with removal of CONFIG_MTD_PARTITIONS
2011-05-25Blackfin: boards: update ASoC resources after machine driver overhaulScott Jiang1-9/+97
Now that the Blackfin machine drivers have been updated to the multicomponent support, update the resources to match. The pin settings are now a board issue and removed from the driver. Signed-off-by: Scott Jiang <scott.jiang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25Blackfin: update anomaly lists to latest public infoMike Frysinger1-2/+8
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25Blackfin: bf537: demux port H mask A and emac rx intsMike Frysinger2-7/+65
The BF537 SIC combines the gpio port H mask A interrupts with the emac rx interrupt, so we need to demux this in software. It also combines the gpio port H mask B and the emac tx interrupts, and the watchdog and port F mask B interrupts, but since we don't support mask B yet, just add the defines for now. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25Blackfin: move bf537-specific irq code out of common codeMike Frysinger2-0/+126
The SIC interrupt line muxing that the bf537 does is specific to this CPU (thankfully), so rip it out of the common code and move it to a bf537-specific file. This tidies up the common code significantly. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25Blackfin: bf533/bf537/bf561: convert to BFIN_IRQ helperMike Frysinger1-33/+33
This brings the parts in line with newer ones, and makes things easier to read at a glance. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25Blackfin: clean up style in irq definesMike Frysinger1-151/+152
These files had a lot of whitespace damage, mostly due to copying and pasting original files that had damage. The BF561 header also had a lot of unused CONFIG_DEF_xxx defines, so punt them all. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25Blackfin: unify core IRQ definitionsMike Frysinger1-38/+1
Start a new common IRQ header and move all of the CEC pieces there. This lets the individual part headers worry just about its SIC defines. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25mtd: bfin: convert to mtd_device_register()Jamie Iles1-4/+0
Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Cc: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-31Fix common misspellingsLucas De Marchi1-1/+1
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-18Blackfin: punt unused HDMA masksMike Frysinger1-18/+0
No code uses these, and the short define names are polluting the global namespace where they collide with things like common irq files. So just punt the damned things. If in the future we need HDMA support, we can make a standalone header for these things. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18Blackfin: use proper wrapper functions for modifying irq statusThomas Gleixner3-3/+3
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18Blackfin: dnp5370: drop MMC card detect supportAndreas Schallenberg1-20/+0
The board doesn't actually have a pin hooked up to do card detection, so punt the code for it. Signed-off-by: Andreas Schallenberg <Andreas.Schallenberg@3alitydigital.de> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-13Merge branch 'for-next' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) Documentation/trace/events.txt: Remove obsolete sched_signal_send. writeback: fix global_dirty_limits comment runtime -> real-time ppc: fix comment typo singal -> signal drivers: fix comment typo diable -> disable. m68k: fix comment typo diable -> disable. wireless: comment typo fix diable -> disable. media: comment typo fix diable -> disable. remove doc for obsolete dynamic-printk kernel-parameter remove extraneous 'is' from Documentation/iostats.txt Fix spelling milisec -> ms in snd_ps3 module parameter description Fix spelling mistakes in comments Revert conflicting V4L changes i7core_edac: fix typos in comments mm/rmap.c: fix comment sound, ca0106: Fix assignment to 'channel'. hrtimer: fix a typo in comment init/Kconfig: fix typo anon_inodes: fix wrong function name in comment fix comment typos concerning "consistent" poll: fix a typo in comment ... Fix up trivial conflicts in: - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c) - fs/ext4/ext4.h Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2011-01-10Blackfin: boards: add missing "static" to peripheral listsMike Frysinger6-25/+25
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: DNP5370: new board portAndreas Schallenberg3-0/+425
Signed-off-by: Andreas Schallenberg <Andreas.Schallenberg@3alitydigital.de> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: sport_uart resources: remove unused secondary RX/TX pinsSonic Zhang5-10/+10
The SPORT/UART driver doesn't use the secondary channel pins, so don't try and request them thus keeping other drivers from using them. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-28 20:19:40 +0000