summaryrefslogtreecommitdiffstats
path: root/arch/blackfin/kernel
AgeCommit message (Collapse)AuthorFilesLines
2014-01-25cramfs: take headers to fs/cramfsAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-11-15blackfin: adi gpio driver and pinctrl driver supportSonic Zhang2-135/+6
Remove gpio driver for new gpio controller on BF54x and BF60x. Build the bfin_gpio driver only when other BF5xx processors are selected. Replace the prefix of some gpio and peripheral functions with adi. add portmux platform data in machine portmux.h Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Steven Miao <realmz6@gmail.com>
2013-11-15Blackfin: bfin_gpio: Use proper mask for comparing pfuncSonic Zhang1-9/+14
For BF537_FAMILY, when offset != 1, the mask is 1. Thus add proper mask for comparing pfunc with function. Also has small refactor for better readability. In portmux_setup(), it looks odd having "pmux &= ~(3 << 1);" while in current code we do pmux |= (function << offset);. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2013-09-13blackfin: scb: Add system crossbar init code.Steven Miao1-0/+6
If SCB exists in select blackfin cpu, developer can change the SCB priority in kernel configuration. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Steven Miao <realmz6@gmail.com>
2013-07-14blackfin: delete __cpuinit usage from all blackfin filesPaul Gortmaker2-3/+3
The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) are flagged as __cpuinit -- so if we remove the __cpuinit from arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the arch/blackfin uses of the __cpuinit macros from all C files. Currently blackfin does not have any __CPUINIT used in assembly files. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Mike Frysinger <vapier@gentoo.org> Cc: Bob Liu <lliubbo@gmail.com> Cc: Sonic Zhang <sonic.zhang@analog.com> Cc: uclinux-dist-devel@blackfin.uclinux.org Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-07-09kgdb: blackfin: include irq_regs.h in kgdb.cSonic Zhang1-0/+1
The function definition of get_irq_regs() is moved to asm header irq_regs.h. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2013-05-10Merge tag 'for-linus' of git://github.com/realmz/blackfin-linuxLinus Torvalds4-10/+44
Pull blackfin updates from Steven Miao. * tag 'for-linus' of git://github.com/realmz/blackfin-linux: bfin cache: dcplb map: add 16M dcplb map for BF60x blackfin: smp: fix smp build after drop asm/system.h blackfin: fix bootup core clock and system clock display Platform Nand: Set the GPIO for NAND read as input blackfin: rename vmImage to uImage after we move to buildroot blackfin: twi: Remove bogus #endif bf609: rsi: Add bf609 rsi MMR macro and board platform data. blackfin: dmc: Improve DDR2 write through in DMC effict controller.
2013-05-09bfin cache: dcplb map: add 16M dcplb map for BF60xSteven Miao3-9/+43
use 16M data cplb map on BF60x to avoid too much dcplb miss overhead cleanup cplb info Signed-off-by: Steven Miao <realmz6@gmail.com>
2013-05-09blackfin: fix bootup core clock and system clock displayJames Cosin1-1/+1
From: James Cosin <jkosin@intcomgrp.com> fixes the number of digits to 6 after the decimal point to regain the significant 0s in the frequency after the decimal point. Signed-off-by: Steven Miao <realmz6@gmail.com>
2013-05-01Merge branch 'for-linus' of ↵Linus Torvalds1-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull VFS updates from Al Viro, Misc cleanups all over the place, mainly wrt /proc interfaces (switch create_proc_entry to proc_create(), get rid of the deprecated create_proc_read_entry() in favor of using proc_create_data() and seq_file etc). 7kloc removed. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits) don't bother with deferred freeing of fdtables proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h proc: Make the PROC_I() and PDE() macros internal to procfs proc: Supply a function to remove a proc entry by PDE take cgroup_open() and cpuset_open() to fs/proc/base.c ppc: Clean up scanlog ppc: Clean up rtas_flash driver somewhat hostap: proc: Use remove_proc_subtree() drm: proc: Use remove_proc_subtree() drm: proc: Use minor->index to label things, not PDE->name drm: Constify drm_proc_list[] zoran: Don't print proc_dir_entry data in debug reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show() proc: Supply an accessor for getting the data from a PDE's parent airo: Use remove_proc_subtree() rtl8192u: Don't need to save device proc dir PDE rtl8187se: Use a dir under /proc/net/r8180/ proc: Add proc_mkdir_data() proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h} proc: Move PDE_NET() to fs/proc/proc_net.c ...
2013-04-30dump_stack: unify debug information printed by show_regs()Tejun Heo1-0/+2
show_regs() is inherently arch-dependent but it does make sense to print generic debug information and some archs already do albeit in slightly different forms. This patch introduces a generic function to print debug information from show_regs() so that different archs print out the same information and it's much easier to modify what's printed. show_regs_print_info() prints out the same debug info as dump_stack() does plus task and thread_info pointers. * Archs which didn't print debug info now do. alpha, arc, blackfin, c6x, cris, frv, h8300, hexagon, ia64, m32r, metag, microblaze, mn10300, openrisc, parisc, score, sh64, sparc, um, xtensa * Already prints debug info. Replaced with show_regs_print_info(). The printed information is superset of what used to be there. arm, arm64, avr32, mips, powerpc, sh32, tile, unicore32, x86 * s390 is special in that it used to print arch-specific information along with generic debug info. Heiko and Martin think that the arch-specific extra isn't worth keeping s390 specfic implementation. Converted to use the generic version. Note that now all archs print the debug info before actual register dumps. An example BUG() dump follows. kernel BUG at /work/os/work/kernel/workqueue.c:4841! invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #7 Hardware name: empty empty/S3992, BIOS 080011 10/26/2007 task: ffff88007c85e040 ti: ffff88007c860000 task.ti: ffff88007c860000 RIP: 0010:[<ffffffff8234a07e>] [<ffffffff8234a07e>] init_workqueues+0x4/0x6 RSP: 0000:ffff88007c861ec8 EFLAGS: 00010246 RAX: ffff88007c861fd8 RBX: ffffffff824466a8 RCX: 0000000000000001 RDX: 0000000000000046 RSI: 0000000000000001 RDI: ffffffff8234a07a RBP: ffff88007c861ec8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff8234a07a R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88007dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffff88015f7ff000 CR3: 00000000021f1000 CR4: 00000000000007f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff88007c861ef8 ffffffff81000312 ffffffff824466a8 ffff88007c85e650 0000000000000003 0000000000000000 ffff88007c861f38 ffffffff82335e5d ffff88007c862080 ffffffff8223d8c0 ffff88007c862080 ffffffff81c47760 Call Trace: [<ffffffff81000312>] do_one_initcall+0x122/0x170 [<ffffffff82335e5d>] kernel_init_freeable+0x9b/0x1c8 [<ffffffff81c47760>] ? rest_init+0x140/0x140 [<ffffffff81c4776e>] kernel_init+0xe/0xf0 [<ffffffff81c6be9c>] ret_from_fork+0x7c/0xb0 [<ffffffff81c47760>] ? rest_init+0x140/0x140 ... v2: Typo fix in x86-32. v3: CPU number dropped from show_regs_print_info() as dump_stack_print_info() has been updated to print it. s390 specific implementation dropped as requested by s390 maintainers. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Chris Metcalf <cmetcalf@tilera.com> [tile bits] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon bits] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30dump_stack: consolidate dump_stack() implementations and unify their behaviorsTejun Heo1-0/+1
Both dump_stack() and show_stack() are currently implemented by each architecture. show_stack(NULL, NULL) dumps the backtrace for the current task as does dump_stack(). On some archs, dump_stack() prints extra information - pid, utsname and so on - in addition to the backtrace while the two are identical on other archs. The usages in arch-independent code of the two functions indicate show_stack(NULL, NULL) should print out bare backtrace while dump_stack() is used for debugging purposes when something went wrong, so it does make sense to print additional information on the task which triggered dump_stack(). There's no reason to require archs to implement two separate but mostly identical functions. It leads to unnecessary subtle information. This patch expands the dummy fallback dump_stack() implementation in lib/dump_stack.c such that it prints out debug information (taken from x86) and invokes show_stack(NULL, NULL) and drops arch-specific dump_stack() implementations in all archs except blackfin. Blackfin's dump_stack() does something wonky that I don't understand. Debug information can be printed separately by calling dump_stack_print_info() so that arch-specific dump_stack() implementation can still emit the same debug information. This is used in blackfin. This patch brings the following behavior changes. * On some archs, an extra level in backtrace for show_stack() could be printed. This is because the top frame was determined in dump_stack() on those archs while generic dump_stack() can't do that reliably. It can be compensated by inlining dump_stack() but not sure whether that'd be necessary. * Most archs didn't use to print debug info on dump_stack(). They do now. An example WARN dump follows. WARNING: at kernel/workqueue.c:4841 init_workqueues+0x35/0x505() Hardware name: empty Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #9 0000000000000009 ffff88007c861e08 ffffffff81c614dc ffff88007c861e48 ffffffff8108f50f ffffffff82228240 0000000000000040 ffffffff8234a03c 0000000000000000 0000000000000000 0000000000000000 ffff88007c861e58 Call Trace: [<ffffffff81c614dc>] dump_stack+0x19/0x1b [<ffffffff8108f50f>] warn_slowpath_common+0x7f/0xc0 [<ffffffff8108f56a>] warn_slowpath_null+0x1a/0x20 [<ffffffff8234a071>] init_workqueues+0x35/0x505 ... v2: CPU number added to the generic debug info as requested by s390 folks and dropped the s390 specific dump_stack(). This loses %ksp from the debug message which the maintainers think isn't important enough to keep the s390-specific dump_stack() implementation. dump_stack_print_info() is moved to kernel/printk.c from lib/dump_stack.c. Because linkage is per objecct file, dump_stack_print_info() living in the same lib file as generic dump_stack() means that archs which implement custom dump_stack() - at this point, only blackfin - can't use dump_stack_print_info() as that will bring in the generic version of dump_stack() too. v1 The v1 patch broke build on blackfin due to this issue. The build breakage was reported by Fengguang Wu. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390 bits] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon bits] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30Merge branch 'smp-hotplug-for-linus' of ↵Linus Torvalds1-26/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull SMP/hotplug changes from Ingo Molnar: "This is a pretty large, multi-arch series unifying and generalizing the various disjunct pieces of idle routines that architectures have historically copied from each other and have grown in random, wildly inconsistent and sometimes buggy directions: 101 files changed, 455 insertions(+), 1328 deletions(-) this went through a number of review and test iterations before it was committed, it was tested on various architectures, was exposed to linux-next for quite some time - nevertheless it might cause problems on architectures that don't read the mailing lists and don't regularly test linux-next. This cat herding excercise was motivated by the -rt kernel, and was brought to you by Thomas "the Whip" Gleixner." * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits) idle: Remove GENERIC_IDLE_LOOP config switch um: Use generic idle loop ia64: Make sure interrupts enabled when we "safe_halt()" sparc: Use generic idle loop idle: Remove unused ARCH_HAS_DEFAULT_IDLE bfin: Fix typo in arch_cpu_idle() xtensa: Use generic idle loop x86: Use generic idle loop unicore: Use generic idle loop tile: Use generic idle loop tile: Enter idle with preemption disabled sh: Use generic idle loop score: Use generic idle loop s390: Use generic idle loop powerpc: Use generic idle loop parisc: Use generic idle loop openrisc: Use generic idle loop mn10300: Use generic idle loop mips: Use generic idle loop microblaze: Use generic idle loop ...
2013-04-29early_printk: consolidate random copies of identical codeThomas Gleixner1-2/+0
The early console implementations are the same all over the place. Move the print function to kernel/printk and get rid of the copies. [akpm@linux-foundation.org: arch/mips/kernel/early_printk.c needs kernel.h for va_list] [paul.gortmaker@windriver.com: sh4: make the bios early console support depend on EARLY_PRINTK] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Richard Weinberger <richard@nod.at> Reviewed-by: Ingo Molnar <mingo@kernel.org> Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-10bfin: Fix typo in arch_cpu_idle()Ingo Molnar1-1/+1
Introduced by commit 25d67f860f3a ("bfin: Use generic idle loop"). Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-09procfs: new helper - PDE_DATA(inode)Al Viro1-3/+1
The only part of proc_dir_entry the code outside of fs/proc really cares about is PDE(inode)->data. Provide a helper for that; static inline for now, eventually will be moved to fs/proc, along with the knowledge of struct proc_dir_entry layout. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-08bfin: Use generic idle loopThomas Gleixner1-26/+6
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mike Frysinger <vapier@gentoo.org> Link: http://lkml.kernel.org/r/20130321215234.014923303@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-02-26Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs pile (part one) from Al Viro: "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent locking violations, etc. The most visible changes here are death of FS_REVAL_DOT (replaced with "has ->d_weak_revalidate()") and a new helper getting from struct file to inode. Some bits of preparation to xattr method interface changes. Misc patches by various people sent this cycle *and* ocfs2 fixes from several cycles ago that should've been upstream right then. PS: the next vfs pile will be xattr stuff." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits) saner proc_get_inode() calling conventions proc: avoid extra pde_put() in proc_fill_super() fs: change return values from -EACCES to -EPERM fs/exec.c: make bprm_mm_init() static ocfs2/dlm: use GFP_ATOMIC inside a spin_lock ocfs2: fix possible use-after-free with AIO ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero target: writev() on single-element vector is pointless export kernel_write(), convert open-coded instances fs: encode_fh: return FILEID_INVALID if invalid fid_type kill f_vfsmnt vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op nfsd: handle vfs_getattr errors in acl protocol switch vfs_getattr() to struct path default SET_PERSONALITY() in linux/elf.h ceph: prepopulate inodes only when request is aborted d_hash_and_lookup(): export, switch open-coded instances 9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate() 9p: split dropping the acls from v9fs_set_create_acl() ...
2013-02-25Merge tag 'pm+acpi-fixes-3.9-rc1' of ↵Linus Torvalds1-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: - Fixes for blackfin and microblaze build problems introduced by the removal of global pm_idle. From Lars-Peter Clausen. - OPP core build fix from Shawn Guo. - Error condition check fix for the new imx6q-cpufreq driver from Wei Yongjun. - Fix for an AER driver crash related to the lack of APEI initialization for acpi=off. From Rafael J Wysocki. - Fix for a USB breakage on Thinkpad T430 related to ACPI power resources and PCI wakeup from Rafael J. Wysocki. * tag 'pm+acpi-fixes-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / PM: Take unusual configurations of power resources into account imx6q-cpufreq: fix return value check in imx6q_cpufreq_probe() PM / OPP: fix condition for empty of_init_opp_table() ACPI / APEI: Fix crash in apei_hest_parse() for acpi=off microblaze idle: Fix compile error blackfin idle: Fix compile error
2013-02-23Merge branch 'for-linus' of ↵Linus Torvalds1-10/+2
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal Pull signal handling cleanups from Al Viro: "This is the first pile; another one will come a bit later and will contain SYSCALL_DEFINE-related patches. - a bunch of signal-related syscalls (both native and compat) unified. - a bunch of compat syscalls switched to COMPAT_SYSCALL_DEFINE (fixing several potential problems with missing argument validation, while we are at it) - a lot of now-pointless wrappers killed - a couple of architectures (cris and hexagon) forgot to save altstack settings into sigframe, even though they used the (uninitialized) values in sigreturn; fixed. - microblaze fixes for delivery of multiple signals arriving at once - saner set of helpers for signal delivery introduced, several architectures switched to using those." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: (143 commits) x86: convert to ksignal sparc: convert to ksignal arm: switch to struct ksignal * passing alpha: pass k_sigaction and siginfo_t using ksignal pointer burying unused conditionals make do_sigaltstack() static arm64: switch to generic old sigaction() (compat-only) arm64: switch to generic compat rt_sigaction() arm64: switch compat to generic old sigsuspend arm64: switch to generic compat rt_sigqueueinfo() arm64: switch to generic compat rt_sigpending() arm64: switch to generic compat rt_sigprocmask() arm64: switch to generic sigaltstack sparc: switch to generic old sigsuspend sparc: COMPAT_SYSCALL_DEFINE does all sign-extension as well as SYSCALL_DEFINE sparc: kill sign-extending wrappers for native syscalls kill sparc32_open() sparc: switch to use of generic old sigaction sparc: switch sys_compat_rt_sigaction() to COMPAT_SYSCALL_DEFINE mips: switch to generic sys_fork() and sys_clone() ...
2013-02-22Merge branch 'for-linus' of ↵Linus Torvalds2-22/+7
git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin Pull small blackfin update from Bob Liu. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin: blackfin: time-ts: Remove duplicate assignment blackfin: pm: fix build error blackfin: sync data in blackfin write buffer blackfin: use bitmap library functions blackfin: mem_init: update dmc config register
2013-02-22new helper: file_inode(file)Al Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-23blackfin idle: Fix compile errorLars-Peter Clausen1-3/+1
Commit 26bab0c ("blackfin idle: delete pm_idle") introduced the following compile error: arch/blackfin/kernel/process.c: In function ‘cpu_idle’: arch/blackfin/kernel/process.c:83: error: ‘idle’ undeclared (first use in this function) arch/blackfin/kernel/process.c:83: error: (Each undeclared identifier is reported only once arch/blackfin/kernel/process.c:83: error: for each function it appears in.) arch/blackfin/kernel/process.c:88: error: implicit declaration of function ‘idle’ This patch fixes it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-21Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-1/+5
Pull ARM SoC cleanups from Arnd Bergmann: "A large number of cleanups, all over the platforms. This is dominated largely by the Samsung platforms (s3c, s5p, exynos) and a few of the others moving code out of arch/arm into more appropriate subsystems. The clocksource and irqchip drivers are now abstracted to the point where platforms that are already cleaned up do not need to even specify the driver they use, it can all get configured from the device tree as we do for normal device drivers. The clocksource changes basically touch every single platform in the process. We further clean up the use of platform specific header files here, with the goal of turning more of the platforms over to being "multiplatform" enabled, which implies that they cannot expose their headers to architecture independent code any more. It is expected that no functional changes are part of the cleanup. The overall reduction in total code lines is mostly the result of removing broken and obsolete code." * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits) ARM: mvebu: correct gated clock documentation ARM: kirkwood: add missing include for nsa310 ARM: exynos: move exynos4210-combiner to drivers/irqchip mfd: db8500-prcmu: update resource passing drivers/db8500-cpufreq: delete dangling include ARM: at91: remove NEOCORE 926 board sunxi: Cleanup the reset code and add meaningful registers defines ARM: S3C24XX: header mach/regs-mem.h local ARM: S3C24XX: header mach/regs-power.h local ARM: S3C24XX: header mach/regs-s3c2412-mem.h local ARM: S3C24XX: Remove plat-s3c24xx directory in arch/arm/ ARM: S3C24XX: transform s3c2443 subirqs into new structure ARM: S3C24XX: modify s3c2443 irq init to initialize all irqs ARM: S3C24XX: move s3c2443 irq code to irq.c ARM: S3C24XX: transform s3c2416 irqs into new structure ARM: S3C24XX: modify s3c2416 irq init to initialize all irqs ARM: S3C24XX: move s3c2416 irq init to common irq code ARM: S3C24XX: Modify s3c_irq_wake to use the hwirq property ARM: S3C24XX: Move irq syscore-ops to irq-pm clocksource: always define CLOCKSOURCE_OF_DECLARE ...
2013-02-20blackfin: time-ts: Remove duplicate assignmentStephen Boyd1-6/+0
It seems that this assignment is done twice in a row. Remove the duplicate assignment. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Steven Miao <realmz6@gmail.com> Cc: trivial@kernel.org Signed-off-by: Bob Liu <lliubbo@gmail.com>
2013-02-20blackfin: use bitmap library functionsAkinobu Mita1-16/+7
The bitmap library provides more efficient functions than accessing individual bits with bitops. This uses bitmap_find_next_zero_area() to find a continuing zero area, and uses bitmap_set()/bitmap_clear() to set/clear specified bit area. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: uclinux-dist-devel@blackfin.uclinux.org Signed-off-by: Bob Liu <lliubbo@gmail.com>
2013-02-17blackfin idle: delete pm_idleLen Brown1-7/+0
pm_idle is dead code on blackfin. Signed-off-by: Len Brown <len.brown@intel.com> Cc: uclinux-dist-devel@blackfin.uclinux.org
2013-02-03blackfin: switch to generic sigaltstackAl Viro1-10/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-24time: convert arch_gettimeoffset to a pointerStephen Warren1-1/+5
Currently, whenever CONFIG_ARCH_USES_GETTIMEOFFSET is enabled, each arch core provides a single implementation of arch_gettimeoffset(). In many cases, different sub-architectures, different machines, or different timer providers exist, and so the arch ends up implementing arch_gettimeoffset() as a call-through-pointer anyway. Examples are ARM, Cris, M68K, and it's arguable that the remaining architectures, M32R and Blackfin, should be doing this anyway. Modify arch_gettimeoffset so that it itself is a function pointer, which the arch initializes. This will allow later changes to move the initialization of this function into individual machine support or timer drivers. This is particularly useful for code in drivers/clocksource which should rely on an arch-independant mechanism to register their implementation of arch_gettimeoffset(). This patch also converts the Cris architecture to set arch_gettimeoffset directly to the final implementation in time_init(), because Cris already had separate time_init() functions per sub-architecture. M68K and ARM are converted to set arch_gettimeoffset to the final implementation in later patches, because they already have function pointers in place for this purpose. Cc: Russell King <linux@arm.linux.org.uk> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Mikael Starvik <starvik@axis.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: John Stultz <johnstul@us.ibm.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-12-18Merge branch 'for-linus' of ↵Linus Torvalds1-2/+11
git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin Pull blackfin update from Bob Liu. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin: blackfin: SEC: clean up SEC interrupt initialization blackfin: kgdb: call generic_exec_single() directly blackfin: anomaly: add anomaly 16000030 for bf5xx Blackfin: dpmc: use module_platform_driver macro Blackfin: remove unused is_in_rom() Blackfin: remove unnecessary prototype for kobjsize() Blackfin: twi: Add missing __iomem annotation Blackfin: Annotate strnlen_user and strlen_user 'src' parameter with __user Blackfin: Annotate clear_user 'to' parameter with __user Blackfin: Add missing __user annotations to put_user Blackfin: Annotate strncpy_from_user src parameter with __user blackfin: Use Kbuild infrastructure for kvm_para.h UAPI: (Scripted) Disintegrate arch/blackfin/include/asm
2012-12-13blackfin: kgdb: call generic_exec_single() directlySonic Zhang1-2/+11
Current generic API smp_call_function_single() is changed to avoid raise IPI and call function in IPI handler on the same core which is necessary to support KGDB switch master core in SMP case, so call generic_exec_single() directly instead of smp_call_function_single(). Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-11-29flagday: kill pt_regs argument of do_fork()Al Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28flagday: don't pass regs to copy_thread()Al Viro1-3/+3
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28bfin: switch to generic vfork, get rid of pointless wrappersAl Viro3-53/+5
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-14blackfin: switch to generic sys_execve()Al Viro1-20/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-14blackfin: convert kernel_thread() and kernel_execve() to generic onesAl Viro2-52/+25
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-12vfs: define struct filename and have getname() return itJeff Layton1-2/+2
getname() is intended to copy pathname strings from userspace into a kernel buffer. The result is just a string in kernel space. It would however be quite helpful to be able to attach some ancillary info to the string. For instance, we could attach some audit-related info to reduce the amount of audit-related processing needed. When auditing is enabled, we could also call getname() on the string more than once and not need to recopy it from userspace. This patchset converts the getname()/putname() interfaces to return a struct instead of a string. For now, the struct just tracks the string in kernel space and the original userland pointer for it. Later, we'll add other information to the struct as it becomes convenient. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-12Merge branch 'for-linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal Pull pile 2 of execve and kernel_thread unification work from Al Viro: "Stuff in there: kernel_thread/kernel_execve/sys_execve conversions for several more architectures plus assorted signal fixes and cleanups. There'll be more (in particular, real fixes for the alpha do_notify_resume() irq mess)..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: (43 commits) alpha: don't open-code trace_report_syscall_{enter,exit} Uninclude linux/freezer.h m32r: trim masks avr32: trim masks tile: don't bother with SIGTRAP in setup_frame microblaze: don't bother with SIGTRAP in setup_rt_frame() mn10300: don't bother with SIGTRAP in setup_frame() frv: no need to raise SIGTRAP in setup_frame() x86: get rid of duplicate code in case of CONFIG_VM86 unicore32: remove pointless test h8300: trim _TIF_WORK_MASK parisc: decide whether to go to slow path (tracesys) based on thread flags parisc: don't bother looping in do_signal() parisc: fix double restarts bury the rest of TIF_IRET sanitize tsk_is_polling() bury _TIF_RESTORE_SIGMASK unicore32: unobfuscate _TIF_WORK_MASK mips: NOTIFY_RESUME is not needed in TIF masks mips: merge the identical "return from syscall" per-ABI code ... Conflicts: arch/arm/include/asm/thread_info.h
2012-10-08Blackfin: fix wrong place disabled irqSteven Miao1-1/+0
Shouldn't disable irq before send ipi. Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-10-08Blackfin: bfin_gpio: proc: fix return valueSteven Miao1-2/+2
Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-10-01Uninclude linux/freezer.hRichard Weinberger1-1/+0
This include is no longer needed. (seems to be a leftover from try_to_freeze()) Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-08-03Merge branch 'for-linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Make sys_atomic_cmpxchg_32 work on classic m68k m68k/apollo: Rename "timer" to "apollo_timer" zorro: Remove unused zorro_bus.devices m68k: Remove never used asm/shm.h m68k/sun3: Remove unselectable code in prom_init() m68k: Use asm-generic version of <asm/sections.h> m68k: Replace m68k-specific _[se]bss by generic __bss_{start,stop} mtd/uclinux: Use generic __bss_stop instead of _ebss m68knommu: Allow ColdFire CPUs to use unaligned accesses m68k: Remove five unused headers m68k: CPU32 does not support unaligned accesses m68k: Introduce config option CPU_HAS_NO_UNALIGNED m68k: delay, muldi3 - Use CONFIG_CPU_HAS_NO_MULDIV64 m68k: Move CPU_HAS_* config options m68k: Remove duplicate FPU config option m68knommu: Clean up printing of sections m68k: Use asm-generic version of <asm/types.h> m68k: Use Kbuild logic to import asm-generic headers
2012-07-30Merge branch 'for-3.6' of git://gitorious.org/linux-pwm/linux-pwmLinus Torvalds2-101/+0
Pull PWM subsystem from Thierry Reding: "The new PWM subsystem aims at collecting all implementations of the legacy PWM API and to eventually replace it completely. The subsystem has been in development for over half a year now and many drivers have already been converted. It has been in linux-next for a couple of weeks and there have been no major issues so I think it is ready for inclusion in your tree." Arnd Bergmann <arnd@arndb.de>: "Very much Ack on the new subsystem. It uses the interface declarations as the previously separate pwm drivers, so nothing changes for now in the drivers using it, although it enables us to change those more easily in the future if we want to. This work is also one of the missing pieces that are required to eventually build ARM kernels for multiple platforms, which is currently prohibited (amongs other things) by the fact that you cannot have more than one driver exporting the pwm functions." Tested-and-acked-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Philip, Avinash <avinashphilip@ti.com> # TI's AM33xx platforms Acked-By: Alexandre Pereira da Silva <aletes.xgr@gmail.com> # LPC32XX Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sachin Kamat <sachin.kamat@linaro.org> Fix up trivial conflicts with other cleanups and DT updates. * 'for-3.6' of git://gitorious.org/linux-pwm/linux-pwm: (36 commits) pwm: pwm-tiehrpwm: PWM driver support for EHRPWM pwm: pwm-tiecap: PWM driver support for ECAP APWM pwm: fix used-uninitialized warning in pwm_get() pwm: add lpc32xx PWM support pwm_backlight: pass correct brightness to callback pwm: Use pr_* functions in pwm-samsung.c file pwm: Convert pwm-samsung to use devm_* APIs pwm: Convert pwm-tegra to use devm_clk_get() pwm: pwm-mxs: Return proper error if pwmchip_remove() fails pwm: pwm-bfin: Return proper error if pwmchip_remove() fails pwm: pxa: Propagate pwmchip_remove() error pwm: Convert pwm-pxa to use devm_* APIs pwm: Convert pwm-vt8500 to use devm_* APIs pwm: Convert pwm-imx to use devm_* APIs pwm: Conflict with legacy PWM API pwm: pwm-mxs: add pinctrl support pwm: pwm-mxs: use devm_* managed functions pwm: pwm-mxs: use global reset function stmp_reset_block pwm: pwm-mxs: encode soc name in compatible string pwm: Take over maintainership of the PWM subsystem ...
2012-07-24blackfin: cplb-nompu: fix ROM cplb size for bf609-ezkitBob Liu1-0/+8
In user xip test, there is a cplb error when ROMKERNEL try to mount romfs using 'mount -t romfs /dev/mtdblock2 /mnt', becasue the CPLB setting is not correct. Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24bfin-dma: only use MDMA3 on bf609Steven Miao1-2/+2
Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24blackfin: Call sg_for_each to pass through the whole sg list.Sonic Zhang1-4/+6
Otherwise, chained sg list may be missed. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-02pwm: Move Blackfin PWM driver to PWM frameworkThierry Reding2-101/+0
This commit moves the Blackfin PWM driver to the drivers/pwm sub- directory and converts it to register with the new PWM framework. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-06-27mtd/uclinux: Use generic __bss_stop instead of _ebssGeert Uytterhoeven1-1/+0
The standard (see BSS_SECTION() in <asm-generic/vmlinux.lds.h> and <asm-generic/sections.h>) symbol for the end of BSS is __bss_stop. This allows to remove all local declarations that have been added to several architectures just to please CONFIG_MTD_UCLINUX. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Michal Simek <monstr@monstr.eu> Acked-by: Greg Ungerer <gerg@uclinux.org>
2012-06-05Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar. * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Remove NULL assignment of dattr_cur sched: Remove the last NULL entry from sched_feat_names sched: Make sched_feat_names const sched/rt: Fix SCHED_RR across cgroups sched: Move nr_cpus_allowed out of 'struct sched_rt_entity' sched: Make sure to not re-read variables after validation sched: Fix SD_OVERLAP sched: Don't try allocating memory from offline nodes sched/nohz: Fix rq->cpu_load calculations some more sched/x86: Use cpu_llc_shared_mask(cpu) for coregroup_mask
2012-06-01blackfin: check __get_user() return valueAl Viro1-16/+14
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>