summaryrefslogtreecommitdiffstats
path: root/arch/blackfin/kernel
AgeCommit message (Collapse)AuthorFilesLines
2008-02-13xtime_lock vs update_process_timesPeter Zijlstra1-3/+5
Commit d3d74453c34f8fd87674a8cf5b8a327c68f22e99 ("hrtimer: fixup the HRTIMER_CB_IRQSAFE_NO_SOFTIRQ fallback") broke several archs, and since only Russell bothered to merge the fix, and Greg to ACK his arch, I'm sending this for merger. I have confirmation that the Alpha bit results in a booting kernel. That leaves: blackfin, frv, sh and sparc untested. The deadlock in question was found by Russell: IRQ handle -> timer_tick() - xtime seqlock held for write -> update_process_times() -> run_local_timers() -> hrtimer_run_queues() -> hrtimer_get_softirq_time() - tries to get a read lock Now, Thomas assures me the fix is trivial, only do_timer() needs to be done under the xtime_lock, and update_process_times() can savely be removed from under it. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Greg Ungerer <gerg@uclinux.org> CC: Richard Henderson <rth@twiddle.net> CC: Bryan Wu <bryan.wu@analog.com> CC: David Howells <dhowells@redhat.com> CC: Paul Mundt <lethal@linux-sh.org> CC: William Irwin <wli@holomorphy.com> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-02[Blackfin] arch: Enable UART2 and UART3 for bf548Sonic Zhang1-0/+10
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-02-02[Blackfin] arch: fix building with mtd uclinux by putting the mtd_phys ↵Mike Frysinger1-3/+4
option into the function it actually gets used in Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-02-02[Blackfin] arch: simpler header and update datesMike Frysinger1-24/+5
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-02-02[Blackfin] arch: move the init sections to the end of memoryMike Frysinger3-27/+36
Move the init sections to the end of memory so that after they are free, run time memory is all continugous - this should help decrease memory fragementation. When doing this, we also pack some of the other sections a little closer together, to make sure we don't waste memory. To make this happen, we need to rename the .data.init_task section to .init_task.data, so it doesn't get picked up by the linker script glob. Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-02-02[Blackfin] arch: fix typo in printk messageMike Frysinger1-1/+1
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-02-02[Blackfin] arch: Fix BUG - Enable ISP1362 driver to work ok with BF561Michael Hennerich1-8/+10
This fixes a bug (zero pointer access) only seen on BF561, during USB Mass Storage/SCSI Host initialization. It appears to be related to registering a none existing CPU Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-02-09[Blackfin] arch: hook up set_irq_wake in Blackfin's irq codeMichael Hennerich1-12/+8
- Add support for irq_wake on system and gpio interrupts - Remove outdated kernel options - Add option to select default PM mode - Fix various places where SIC_IWRx was only handled partially Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-02-09[Blackfin] arch: add "memmap=nn[KMG]@ss[KMG]" and "memmap=nn[KMG]$ss[KMG]" ↵Yi Li1-114/+427
options to blackfin, based on arch/i386/kernel/e820.c Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-02-02[Blackfin] arch: error out if ANOMALY_05000263 applies while enabling the MPUMike Frysinger1-0/+4
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-02-08procfs: constify function pointer tablesJan Engelhardt1-1/+1
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Mike Frysinger <vapier@gentoo.org> Acked-By: David Howells <dhowells@redhat.com> Acked-by: Bryan Wu <bryan.wu@analog.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08aout: remove unnecessary inclusions of {asm, linux}/a.out.hDavid Howells1-1/+0
Remove now unnecessary inclusions of {asm,linux}/a.out.h. [akpm@linux-foundation.org: fix alpha build] Signed-off-by: David Howells <dhowells@redhat.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Introduce flags for reserve_bootmem()Bernhard Walle1-1/+1
This patchset adds a flags variable to reserve_bootmem() and uses the BOOTMEM_EXCLUSIVE flag in crashkernel reservation code to detect collisions between crashkernel area and already used memory. This patch: Change the reserve_bootmem() function to accept a new flag BOOTMEM_EXCLUSIVE. If that flag is set, the function returns with -EBUSY if the memory already has been reserved in the past. This is to avoid conflicts. Because that code runs before SMP initialisation, there's no race condition inside reserve_bootmem_core(). [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix powerpc build] Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: <linux-arch@vger.kernel.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-28all archs: consolidate init and exit sections in vmlinux.lds.hSam Ravnborg1-4/+4
This patch consolidate all definitions of .init.text, .init.data and .exit.text, .exit.data section definitions in the generic vmlinux.lds.h. This is a preparational patch - alone it does not buy us much good. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-27[Blackfin] arch: fix bug kernel boot message: memory information is not ↵Yi Li1-0/+1
reasonable Some of the information in kernel boot message is not reasonable. http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3846 - use _rambase as the start of kernel image. kernel is in the region [_rambase, _ramstart] - count in pages in per-cpu-page list as available memory - reserved memory now include: [0 - 4K] for bad pointer catching, memory reserved for abnormaly 05000263, memory reserved by kernel itself. Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-22[Blackfin] arch: Fix bug - kernel build with Debug option enabled fails to ↵Michael Hennerich1-0/+2
boot up writes to I/DMEM_CONTROL must be followed by SSYNC Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-22[Blackfin] arch: Add proper SW System Reset delay sequenceMichael Hennerich1-3/+12
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-22[Blackfin] arch: GPIO API cleanup and anomaly updateMichael Hennerich1-35/+28
- Add anomaly workaround for bfin_gpio_reset_spi0_ssel1 - Fix style - Update copyright - Remove BUG_ON checks for functions intended to be used only by arch support. GPIO users should only access using the generic GPIO API - Make all GPIO identifier unsigned int Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-22[Blackfin] arch: Fix BUG gpio_direction_output API is not compatitable with ↵Michael Hennerich1-13/+42
GENERIC_GPIO API interface signef-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-27[Blackfin] arch: Initial checkin of the memory protection support.Bernd Schmidt6-0/+653
Enable it with CONFIG_MPU. Signed-off-by: Bernd Schmidt <bernd.schmidt@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-22[Blackfin] arch: set_bfin_dma_config shouldnt set SYNC or RESTART by default ↵Michael Hennerich1-2/+2
- add argument or option Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-11[Blackfin] arch: move all code related to CPLB handling into a new ↵Bernd Schmidt7-1/+993
subdirectory under kernel/ Signed-off-by: Bernd Schmidt <bernd.schmidt@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-11[Blackfin] arch: print out list of modules if kernel is crashing and tell ↵Robin Getz1-1/+2
people if the kernel is tainted Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-10[Blackfin] arch: Don't oops_in_progress if single step is comming from the ↵Robin Getz1-2/+2
kernel Don't oops_in_progress if single step is comming from the kernel, which happens if a single step occurs after a exception cause. This fixes up the remaining issues in the toolchain bug. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-24[Blackfin] arch: Fix BUG - kernel sometimes would stuck with KEYBOARD_GPIO onMichael Hennerich1-0/+2
Make sure the SYSTEM reset completes before we issue the CORE reset Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-24[Blackfin] arch: Spelling fixesJoe Perches1-1/+1
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-24[Blackfin] arch: Fix gpio label handlingMichael Hennerich1-13/+18
early serial init also utilizes the peripheral request api - however at this point bfin_gpio_init didn't allocate memory for the labels. So we always have two zombies (allocated pin functions without labels) This happens before the initcalls - We now allocate memory statically. Define MAX_RESOURCES individually for each cpu. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-24[Blackfin] arch: add support for BF523/BF524/BF526Mike Frysinger1-0/+34
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-24[Blackfin] arch: scrub dead alive/idle LED codeMike Frysinger3-103/+0
if it does get re-added, it needs to be in the boards directory, not common code ... or it needs a re-implementation Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-23[Blackfin] arch: Clean up dump_bfin_memRobin Getz3-49/+86
Clean up dump_bfin_mem so that it will display content from the kernel, as well as l1 instruction, when deferred HW errors happen, print out the last frame info if it makes sense. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-24[Blackfin] arch: fix bug gdb testing on hardware has regressionRobin Getz1-7/+30
http://blackfin.uclinux.org/gf/project/toolchain/tracker/?action=TrackerItemEdit&tracker_item_id=3651 As Bernd predicted, this was only necessary because of other problems in the kenel - fixing those, and this is not necessary, so remove it. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-27[Blackfin] arch: fix bug - trap_tests fails to recover on some tests.Robin Getz1-8/+46
http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3719 When the CPLBs get a miss, we do: - find a victim in the HW table - remove the victim - find the replacement in the software table - put it into the HW table. If we can't find a replacement in the software table, we accidently leave a duplicate in the HW table. This patch ensures that duplicate is marked as not valid. What we should do is find the replacement in the software table, before we find a victim in the HW table - but its too late in the release cycle to do that much restructuring of this code. Rather that duplicate code, connect Hardware Errors (irq5) into trap_c, so user space processes get killed properly. The rest of irq_panic() can be moved into traps.c (later) There is still a small corner case that causes problems when a pheriperal interrupt goes off a single cycle before a user space hardware error. This causes a kernel panic, rather than the user space process being killed. But, this checkin makes things work in 99.9% of the cases, and is a vast improvement from what is there today (which fails 100% of the time). Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21Blackfin arch: split apart dump_bfin_regs and merge/remove show_regs from ↵Mike Frysinger3-53/+56
process.c, which was largely duplicated Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21Blackfin arch: fix bug when sending signals with the wrong PC, cause gdb get ↵Robin Getz1-6/+8
confused We need to send signals with the proper PC, or gdb gets confused, and lots of tests fail. This should fix that. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21Blackfin arch: Ensure we printk out strings with the proper loglevelRobin Getz1-15/+15
Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21Blackfin arch: cplb and map header file cleanupMike Frysinger1-16/+26
- remove duplicated defines for the BF561 - generalize L2 support (so that it works for BF54x) and mark it executable - add support for reading/executing the Boot ROM sections (since it has data/functions we may need at runtime) - and fixup names for each map Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21Blackfin arch: cleanup the cplb declaresMike Frysinger1-17/+10
- no need to declare their sizes in the common header - no need to tack on the section attribute as only the definition matters, not references Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21Blackfin arch: rename _return_from_exception to _bfin_return_from_exception ↵Mike Frysinger1-0/+1
and export it Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21Blackfin arch: move EXPORT_SYMBOL() to C files where the symbol is actually ↵Mike Frysinger1-3/+0
defined Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21Blackfin arch: export symbol get_dma_curr_desc_ptr for driver usageCliff Cai1-0/+1
Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-18Blackfin arch: cleanup kernel exception message, don't insult the customer.Robin Getz1-2/+2
Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-18Blackfin arch: fix bug kernel not to boot up with mtd filesystemsBernd Schmidt3-33/+24
Revert this patch: move the init sections to the end of memory, so that after they are free, run time memory is all continugous - this should help decrease memory fragementation. When doing this, we also pack some of the other sections a little closer together, to make sure we don't waste memory. To make this happen, we need to rename the .data.init_task section to .init_task.data, so it doesn't get picked up by the linker script glob. Since it causes the kernel not to boot up with mtd filesystems. Signed-off-by: Bernd Schmidt <bernd.schmidt@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-18Blackfin arch: print out modules that are loaded if we get a kernel oopsRobin Getz1-0/+1
Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-17Blackfin arch: Add assembly function insl_16Michael Hennerich1-0/+1
/* * CPUs often take a performance hit when accessing unaligned memory * locations. The actual performance hit varies, it can be small if the * hardware handles it or large if we have to take an exception and fix * it * in software. * * Since an ethernet header is 14 bytes network drivers often end up * with * the IP header at an unaligned offset. The IP header can be aligned by * shifting the start of the packet by 2 bytes. Drivers should do this * with: * * skb_reserve(NET_IP_ALIGN); * * The downside to this alignment of the IP header is that the DMA is * now * unaligned. On some architectures the cost of an unaligned DMA is high * and this cost outweighs the gains made by aligning the IP header. * * Since this trade off varies between architectures, we allow * NET_IP_ALIGN * to be overridden. */ This new function insl_16 allows to read form 32-bit IO and writes to 16-bit aligned memory. This is useful in above described scenario - In particular with the AXIS AX88180 Gigabit Ethernet MAC. Once the device is in 32-bit mode, reads from the RX FIFO always decrements 4bytes. While on the other side the destination address in SDRAM is always 16-bit aligned. If we use skb_reserve(0) the receive buffer is 32-bit aligned but later we hit a unaligned exception in the IP code. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-23Blackfin arch: use do_div() for the 64bit division as pointed out by BerndMike Frysinger1-2/+7
If you need a 64 bit divide in the kernel, use asm/div64.h. Revert the addition of udivdi3. Cc: Bernd Schmidt <bernd.schmidt@analog.com> Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-17Blackfin arch: unexport get_wchanAdrian Bunk1-1/+0
The only user of get_wchan I was able to find is the proc fs - and proc can't be built modular. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-18Blackfin arch: remove dump_thread()Adrian Bunk2-46/+0
The only user is the a.out support. It was therefore removed prior to the blackfin merge from all architectures not supporting a.out. Currently, Blackfin doesn't suppport a.out. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-15Blackfin arch: move the init sections to the end of memory to help decrease ↵Robin Getz3-24/+33
memory fragementation move the init sections to the end of memory, so that after they are free, run time memory is all continugous - this should help decrease memory fragementation. When doing this, we also pack some of the other sections a little closer together, to make sure we don't waste memory. To make this happen, we need to rename the .data.init_task section to .init_task.data, so it doesn't get picked up by the linker script glob. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-15Blackfin arch: fix bug cplbmgr.S does not exit properly on error conditionRobin Getz2-4/+4
https://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=1685 Ensure that cache/protection is turned back on when we get a fault, and ensure that the initial population of the CPLB tables are correct - that kernel is locked in CPLB tables Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-12Blackfin arch: fix bux - only reset the PC when necessary, otherwise gdb ↵Robin Getz1-2/+3
gets confused Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-01 08:08:55 +0000