summaryrefslogtreecommitdiffstats
path: root/arch/avr32
AgeCommit message (Collapse)AuthorFilesLines
2007-03-16[PATCH] gpio_direction_output() needs an initial valueDavid Brownell1-1/+3
It's been pointed out that output GPIOs should have an initial value, to avoid signal glitching ... among other things, it can be some time before a driver is ready. This patch corrects that oversight, fixing - documentation - platforms supporting the GPIO interface - users of that call (just one for now, others are pending) There's only one user of this call for now since most platforms are still using non-generic GPIO setup code, which in most cases already couples the initial value with its "set output mode" request. Note that most platforms are clear about the hardware letting the output value be set before the pin direction is changed, but the s3c241x docs are vague on that topic ... so those chips might not avoid the glitches. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Andrew Victor <andrew@sanpeople.com> Acked-by: Milan Svoboda <msvoboda@ra.rockwell.com> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-07[AVR32] Don't use kmap() in flush_icache_page()Haavard Skinnemoen1-2/+1
flush_icache_page() can be called from atomic context, so we can't use kmap(). Use page_address() instead. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-03-07[AVR32] Fix bogus ti->flags manipulation in debug handlerHaavard Skinnemoen1-2/+2
We should OR in a bitmask, not a bit offset, into ti->flags. This might fix some strange behaviour when single stepping. Also, use set_ti_thread_flag() to manipulate the flags to avoid surprises in the future. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-03-07[AVR32] show_trace: Only walk valid stack addressesHaavard Skinnemoen1-23/+29
Terminate the frame pointer walk if (a) the address is outside the task's kernel stack or (b) if the frame pointer isn't monotonically increasing. Without this fix, show_trace() may enter an infinite loop, walking through random data anywhere in memory. Since any address within the kernel stack is guaranteed to be valid, we may eliminate the __get_user() calls as well. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-03-07[AVR32] at32_spi_setup_slaves should be __initHaavard Skinnemoen1-1/+1
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-03-05[PATCH] add CONFIG_GENERIC_GPIODavid Brownell1-0/+4
Most drivers using GPIOs already know they are running on a system that supports the generic GPIO calls, because of other platform dependencies. But the generic GPIO-based LED and input button drivers can't know that. So this patch adds a Kconfig hook, GENERIC_GPIO, to mark the platforms where <asm/gpio.h> will do the right thing. Currently that's a bunch of ARMs, and AVR32; more are on the way. It also fixes a dependency bug for the gpio button input driver; it was wrong to start with, now it covers all platforms with GENERIC_GPIO. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Richard Purdie <rpurdie@rpsys.net> Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Cc: <raph@8d.com> Cc: <msvoboda@ra.rockwell.com> Cc: pHilipp Zabel <philipp.zabel@gmail.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-19Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2-2/+2
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (117 commits) [ARM] 4058/2: iop32x: set ->broken_parity_status on n2100 onboard r8169 ports [ARM] 4140/1: AACI stability add ac97 timeout and retries [ARM] 4139/1: AACI record support [ARM] 4138/1: AACI: multiple channel support for IRQ handling [ARM] 4211/1: Provide a defconfig for ns9xxx [ARM] 4210/1: base for new machine type "NetSilicon NS9360" [ARM] 4222/1: S3C2443: Remove reference to missing S3C2443_PM [ARM] 4221/1: S3C2443: DMA support [ARM] 4220/1: S3C24XX: DMA system initialised from sysdev [ARM] 4219/1: S3C2443: DMA source definitions [ARM] 4218/1: S3C2412: fix CONFIG_CPU_S3C2412_ONLY wrt to S3C2443 [ARM] 4217/1: S3C24XX: remove the dma channel show at startup [ARM] 4090/2: avoid clash between PXA and SA1111 defines [ARM] 4216/1: add .gitignore entries for ARM specific files [ARM] 4214/2: S3C2410: Add Armzone QT2410 [ARM] 4215/1: s3c2410 usb device: per-platform vbus_draw [ARM] 4213/1: S3C2410 - Update definition of ADCTSC_XY_PST [ARM] 4098/1: ARM: rtc_lock only used with rtc_cmos [ARM] 4137/1: Add kexec support [ARM] 4201/1: SMP barriers pair needed for the secondary boot process ... Fix up conflict due to typedef removal in sound/arm/aaci.h
2007-02-16Merge branch 'for-linus' of git://www.atmel.no/~hskinnemoen/linux/kernel/avr32Linus Torvalds4-49/+132
* 'for-linus' of git://www.atmel.no/~hskinnemoen/linux/kernel/avr32: [AVR32] Use per-controller spi_board_info structures [AVR32] Warn, don't BUG if clk_disable is called too many times [AVR32] Make sure all genclocks have a parent [AVR32] Remove unnecessary sys_nfsservctl conditional [AVR32] Wire up the SysV IPC calls properly [AVR32] Define ioremap_nocache, ioport_map and ioport_unmap [AVR32] Fix prototypes for __raw_writesb and friends
2007-02-16[PATCH] clocksource: fixup is_continous changes on AVR32Thomas Gleixner1-1/+1
Fixup the is_contionous replacement by a flag field. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: john stultz <johnstul@us.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16[AVR32] Use per-controller spi_board_info structuresHaavard Skinnemoen2-23/+41
Set up one spi_board_info array per controller and pass this to at32_add_device_spi so that it can set up any GPIO pins for chip selects based on this information. Extracted from a patch by David Brownell and adapted slightly. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-02-16[AVR32] Warn, don't BUG if clk_disable is called too many timesHaavard Skinnemoen1-1/+5
Print a helpful warning along with a stack dump if clk_disable is called on a already-disabled clock. Remove the BUG_ON(). Extracted from a patch by David Brownell. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-02-16[AVR32] Make sure all genclocks have a parentHaavard Skinnemoen1-16/+73
Initialize the parent field of each generic clock by looking at the PM registers. This means that the genclock operations can always assume that the parent field is non-null, so they don't have to check. Also remove a few unnecessary BUG_ON()s. Extracted from a patch by David Brownell. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-02-16[AVR32] Remove unnecessary sys_nfsservctl conditionalHaavard Skinnemoen1-4/+0
kernel/sys_ni.c defines sys_nfsservctl as a weak alias for sys_ni_syscall, so it's always safe to include it in the system call table. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-02-16[AVR32] Wire up the SysV IPC calls properlyHaavard Skinnemoen1-5/+13
Wire up the individual sysvipc system calls and remove sys_ipc. Strictly speaking, this breaks the ABI, but since sys_ipc never worked anyway due to a silly bug, it isn't actually a regression. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-02-12[PATCH] mark struct file_operations const 2Arjan van de Ven1-1/+1
Many struct file_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. [akpm@osdl.org: sparc64 fix] Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] Dynamic kernel command-line: avr32Alon Bar-Lev1-3/+3
1. Rename saved_command_line into boot_command_line. 2. Set command_line as __initdata. Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] Consolidate default sched_clock()Alexey Dobriyan1-9/+0
Use attribute(weak). Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] disable init/initramfs.c: architecturesJean-Paul Saman1-0/+2
Update all arch/*/kernel/vmlinux.lds.S to not include space for initramfs when CONFIG_BLK_DEV_INITRAMFS is not selected. This saves another 4 kbytes on most platfoms (some reserve PAGE_SIZE for initramfs). Signed-off-by: Jean-Paul Saman <jean-paul.saman@nxp.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-09[AVR32] Add missing #include <linux/module.h>Haavard Skinnemoen1-0/+1
arch/avr32/kernel/cpu.c needs THIS_MODULE, so it must include linux/module.h. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-02-09[AVR32] Remove last remains of libgccHaavard Skinnemoen2-131/+0
Two libgcc headers were left around even though all the actual code borrowed from libgcc is gone. Delete them. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-02-09[AVR32] SPI platform code updateHaavard Skinnemoen4-36/+51
Move stuff in spi.c into ATSTK1002 board code and update SPI platform device definitions according to the new GPIO API. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-02-09[AVR32] Add PIOE device and reserve SDRAM pinsHaavard Skinnemoen2-0/+33
The PIOE device was left out before because it muxes SDRAM pins (and is therefore a bit dangerous to mess with) and because no existing drivers had any use for it. It is needed for CompactFlash, however, and now that we have a way to protect the SDRAM pins, it can be safely added. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-02-09[AVR32] Introduce at32_reserve_pin()Haavard Skinnemoen1-1/+22
at32_reserve_pin() can be used for reserving portmux pins without altering their configuration. Useful for e.g. SDRAM pins where we really don't want to change the bootloader-provided configuration. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-02-09[AVR32] Don't reset PIO state at bootupHaavard Skinnemoen1-3/+0
Leave the PIO lines as the bootloader left them. This allows us to use PIOE without disturbing the SDRAM muxing. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-02-09[AVR32] GPIO API implementationHaavard Skinnemoen3-16/+221
Arch-neutral GPIO calls for AVR32. GPIO IRQ support written by David Brownell. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-02-09[AVR32] Use ARRAY_SIZE macro when appropriateAhmed S. Darwish1-2/+2
A patch to use ARRAY_SIZE macro already defined in linux/kernel.h Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-02-09[AVR32] Fix incorrect invalidation of shared cachelinesDavid Brownell1-8/+24
Fix bug in dma_map_single(..., DMA_FROM_DEVICE) caused by incorrect invalidation of shared cachelines at the beginning and/or end of the specified buffer. Those shared cachelines need to be flushed, since they may hold valid data (which must not be discarded). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-02-09[AVR32] ext int fixesDavid Brownell1-19/+17
Bugfixes for external irq handler set_irq_type(): - If set_irq_type() can't set the type, don't change anything! - It's not OK to change the flow handler as part of set_irq_type(), among other issues that violates spinlock rules. Instead, we can call the relevant handler when we demux the external interrupts. - The external irq demux has no need to grab the spinlock. And in fact grabbing it that way was wrong, since that code might be pre-empted by an irq at a different priority level, and that code might then have tried to grab that spinlock... Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-02-09[AVR32] fix serial port setup on ATSTK1000David Brownell2-5/+15
Fixes to USART setup on the stk-1000 ... don't configure USART 2, since its TXD/RXD are used for INT-A and INT-B buttons; and configure USART 0 (for IRDA, and with corrected IRQ) iff SW2 has a non-default setting. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-02-09[AVR32] /proc/interrupts displayDavid Brownell1-0/+1
The /proc/interrupts file should also display the irq_chip associated with each irq ... e.g. INTC, EIM, GPIO. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-02-08[ARM] 4124/1: Rename mach-at91rm9200 and arch-at91rm9200 directoriesAndrew Victor2-2/+2
Now that Linux includes support for the Atmel AT91SAM9260 and AT91SAM9261 processors in addition to the original Atmel AT91RM9200 (with support for more AT91 processors pending), the "mach-at91rm9200" and "arch-at91rm9200" directories should be renamed to indicate their more generic nature. The following git commands should be run BEFORE applying this patch: git-mv arch/arm/mach-at91rm9200 arch/arm/mach-at91 git-mv include/asm-arm/arch-at91rm9200 include/asm-arm/arch-at91 Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-01-26[AVR32] Update ATSTK1000 defconfig: Enable macb by defaultHaavard Skinnemoen1-12/+27
Enable the Atmel MACB ethernet driver by default on ATSTK1000. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-01-26[AVR32] Export clear_page symbolHaavard Skinnemoen1-0/+1
Add missing EXPORT_SYMBOL(clear_page), allowing ext3 to be compiled as a module. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2006-12-11Merge branch 'for-linus' of git://www.atmel.no/~hskinnemoen/linux/kernel/avr32Linus Torvalds10-406/+287
* 'for-linus' of git://www.atmel.no/~hskinnemoen/linux/kernel/avr32: [AVR32] Add missing #include <linux/param.h> to delay.c [AVR32] Pass dev parameter to dma_cache_sync() [AVR32] Implement intc_get_pending() [AVR32] Don't include <asm/delay.h> [AVR32] Put the chip in "stop" mode when halting the system [AVR32] Set flow handler for external interrupts [AVR32] Remove unused file [AVR32] Remove mii_phy_addr and eth_addr from eth_platform_data [AVR32] Move ethernet tag parsing to board-specific code [AVR32] Add macb1 platform_device [AVR32] Portmux API update
2006-12-08[PATCH] LOG2: Implement a general integer log2 facility in the kernelDavid Howells1-0/+8
This facility provides three entry points: ilog2() Log base 2 of unsigned long ilog2_u32() Log base 2 of u32 ilog2_u64() Log base 2 of u64 These facilities can either be used inside functions on dynamic data: int do_something(long q) { ...; y = ilog2(x) ...; } Or can be used to statically initialise global variables with constant values: unsigned n = ilog2(27); When performing static initialisation, the compiler will report "error: initializer element is not constant" if asked to take a log of zero or of something not reducible to a constant. They treat negative numbers as unsigned. When not dealing with a constant, they fall back to using fls() which permits them to use arch-specific log calculation instructions - such as BSR on x86/x86_64 or SCAN on FRV - if available. [akpm@osdl.org: MMC fix] Signed-off-by: David Howells <dhowells@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David Howells <dhowells@redhat.com> Cc: Wojtek Kaniewski <wojtekka@toxygen.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08[AVR32] Add missing #include <linux/param.h> to delay.cHaavard Skinnemoen1-0/+1
__const_udelay() needs HZ, which is defined in <asm/param.h>. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2006-12-08[AVR32] Implement intc_get_pending()Haavard Skinnemoen1-0/+4
intc_get_pending() returns a bitmask with pending interrupts in a interrupt controller group (irq). This is used by the upcoming oprofile implementation for avr32 and may also be useful for chained interrupt controller drivers. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2006-12-08[AVR32] Don't include <asm/delay.h>Haavard Skinnemoen2-2/+1
Include <linux/delay.h> instead of <asm/delay.h> from a few places. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2006-12-08[AVR32] Put the chip in "stop" mode when halting the systemHaavard Skinnemoen1-0/+7
Make machine_halt() execute a sleep instruction to put the chip in "stop" mode when the system is halted. This switches off all clocks except the 32 kHz oscillator, which is needed for the RTC to keep ticking. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2006-12-08[AVR32] Set flow handler for external interruptsHaavard Skinnemoen1-2/+20
Make sure that the flow handler for external interrupts is updated whenever they type is changed. Also make sure that the defaults correspond with how the interrupt controller is configured. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2006-12-08[AVR32] Remove unused fileHaavard Skinnemoen1-289/+0
Remove arch/avr32/mach-at32ap/sm.c, which is not referenced by any Makefile. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2006-12-08[AVR32] Remove mii_phy_addr and eth_addr from eth_platform_dataHaavard Skinnemoen1-8/+57
The macb driver will probe for the PHY chip and read the mac address from the MACB registers, so we don't need them in eth_platform_data anymore. Since u-boot doesn't currently initialize the MACB registers with the mac addresses, the tag parsing code is kept but instead of sticking the information into eth_platform_data, it uses it to initialize the MACB registers (in case the boot loader didn't do it.) This code should be unnecessary at some point in the future. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2006-12-08[AVR32] Move ethernet tag parsing to board-specific codeHaavard Skinnemoen2-32/+23
By moving the ethernet tag parsing to the board-specific code we avoid the issue of figuring out which device we're supposed to attach the information to. The board specific code knows this because it's where the actual devices are instantiated. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2006-12-08[AVR32] Add macb1 platform_deviceHaavard Skinnemoen1-0/+38
Add platform_device definition and pio init code for the second ethernet controller in AT32AP7000. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2006-12-08[AVR32] Portmux API updateHaavard Skinnemoen2-83/+146
Rename portmux_set_func to at32_select_periph, add at32_select_gpio and add flags parameter to specify the initial state of the pins. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2006-12-07[PATCH] Pass struct dev pointer to dma_cache_sync()Ralf Baechle1-1/+1
Pass struct dev pointer to dma_cache_sync() dma_cache_sync() is ill-designed in that it does not have a struct device pointer argument which makes proper support for systems that consist of a mix of coherent and non-coherent DMA devices hard. Change dma_cache_sync to take a struct device pointer as first argument and fix all its callers to pass it. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] Add include/linux/freezer.h and move definitions from sched.hNigel Cunningham1-1/+1
Move process freezing functions from include/linux/sched.h to freezer.h, so that modifications to the freezer or the kernel configuration don't require recompiling just about everything. [akpm@osdl.org: fix ueagle driver] Signed-off-by: Nigel Cunningham <nigel@suspend2.net> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] avr32: fixup kprobes preemption handlingPaul Mundt1-0/+1
While working on SH kprobes, I noticed that avr32 got the preemption handling wrong in the no probe case. The idea is that upon entry of kprobe_handler() preemption is disabled outright across the life of the kprobe, only to be re-enabled in post_kprobe_handler(). However, in the event that the probe is never activated, there's never any chance of hitting the post probe handler, which allows for the current avr32 implementation to disable preemption indefinitely, as it's currently missing a re-enable when no probe is activated. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-06AVR32: Add missing return instruction in __raw_writesbHaavard Skinnemoen1-0/+2
__raw_writesb ends with a conditional branch, which is obviously wrong. It should return after the last loop terminates. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2006-11-06AVR32: Wire up sys_epoll_pwaitHaavard Skinnemoen2-0/+10
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-30 12:27:20 +0000