| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
More Qualcomm DTS updates for 6.2
This introduces support for the OnePlus One, on MSM8974Pro, and properly
marks other Pro devices as compatible thereof. Also on MSM8974, the
description of USB devices and their PHYs are cleaned up.
On the binding side compatibles for recently added ARM and ARM64 boards
are added.
* tag 'qcom-dts-for-6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (102 commits)
dt-bindings: arm: qcom: Add zombie
ARM: dts: qcom: msm8974: Add OnePlus One
dt-bindings: arm: qcom: Document oneplus,bacon device
ARM: dts: qcom: msm8974: clean up USB nodes
arm: dts: qcom: use qcom,msm8974pro for pro devices
dt-bindings: arm: qcom: split MSM8974 Pro and MSM8974
ARM: dts: qcom: align LED node names with dtschema
dt-bindings: arm: qcom: Document additional sa8540p device
dt-bindings: arm: qcom: Add Xperia 5 IV (PDX224)
dt-bindings: arm: qcom: Document msm8956 and msm8976 SoC and devices
dt-bindings: arm: add xiaomi,sagit board based on msm8998 chip
dt-bindings: arm: qcom: add sdm670 and pixel 3a compatible
dt-bindings: arm: cpus: add qcom kryo 360 compatible
ARM: dts: qcom-msm8960-cdp: align TLMM pin configuration with DT schema
ARM: dts: qcom-msm8960: use define for interrupt constants
dt-bindings: arm: qcom: Document SM6375 & Xperia 10 IV
ARM: dts: qcom-apq8060: align TLMM pin configuration with DT schema
ARM: dts: qcom: msm8226: Add MMCC node
dt-bindings: arm: qcom: Separate LTE/WIFI SKU for sc7280-evoker
dt-bindings: arm: qcom: Document QDU1000/QRU1000 SoCs and boards
...
Link: https://lore.kernel.org/r/20221207153201.3233015-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into soc/dt
SoCFPGA dts updates for v6.2, part 2
- Fix dtschema for LED node
- Fix dtschema for i2c-mux
* tag 'socfpga_dts_updates_for_v6.2_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: dts: socfpga: Fix pca9548 i2c-mux node name
ARM: dts: socfpga: align LED node names with dtschema
arm64: dts: altera: align LED node names with dtschema
Link: https://lore.kernel.org/r/20221206214006.590562-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
"make dtbs_check":
arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dtb: i2cswitch@70: $nodename:0: 'i2cswitch@70' does not match '^(i2c-?)?mux'
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dtb: i2cswitch@70: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@0', 'i2c@1', 'i2c@2', 'i2c@3', 'i2c@4', 'i2c@5', 'i2c@6', 'i2c@7' were unexpected)
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
Fix this by renaming the PCA9548 node to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
OnePlus One is a smartphone launched in 2014 and is based on the
Snapdragon 801 SoC (-AC variant).
Supported features:
* ADSP
* Charger
* Coincell charger
* Fuel gauge
* Internal storage
* Touchscreen
* UART
* USB
* Wifi/Bluetooth
Signed-off-by: Julian Goldsmith <julian@juliangoldsmith.com>
Co-developed-by: Oleg Chernovskiy <kanedias@keemail.me>
Signed-off-by: Oleg Chernovskiy <kanedias@keemail.me>
Co-developed-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221128172531.828660-2-luca@z3ntu.xyz
|
|
Rename "otg" label to "usb" to group it with other usb nodes and also
because "usb" makes more sense for a USB controller.
And now we can also better use the usb_hsX_phy labels instead of having
the ulpi -> phy@X structure in every dts.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221128171623.825572-1-luca@z3ntu.xyz
|
|
Use new qcom,msm8974pro compatible string instead of qcom,msm8974 to
clearly mark that the device is using the Pro version of the SoC.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221128131550.858724-2-dmitry.baryshkov@linaro.org
|
|
The node names should be generic and DT schema expects certain pattern:
qcom-ipq4018-ap120c-ac.dtb: leds: 'wlan2g', 'wlan5g' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221125144209.477328-2-krzysztof.kozlowski@linaro.org
|
|
The timer was missing the clock and reset like the other peripherals.
Add them to allow the timer to continue working after boot completes.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Link: https://lore.kernel.org/r/20221204005117.53452-2-doug@schmorgal.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt
Minor improvements in ARM DTS for v6.2, part two
Few cleanups which should not have any functional impact:
1. Trim addresses in "reg" to 8 digits.
2. Align LED node names with dtschema.
3. omap: echo: Use preferred enable-gpios property for LP5523 LED.
* tag 'dt-cleanup-6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
ARM: dts: sti: align LED node names with dtschema
ARM: dts: am335x: align LED node names with dtschema
ARM: dts: omap: echo: use preferred enable-gpios for LP5523 LED
ARM: dts: omap: align LED node names with dtschema
ARM: dts: logicpd: align LED node names with dtschema
ARM: dts: lpc32xx: trim addresses to 8 digits
ARM: dts: imx: trim addresses to 8 digits
ARM: dts: omap: trim addresses to 8 digits
Link: https://lore.kernel.org/r/20221204082909.5649-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The node names should be generic and DT schema expects certain pattern:
stih407-b2120.dtb: leds: 'green', 'red' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20221125144116.476877-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The node names should be generic and DT schema expects certain pattern:
am335x-baltos-ir2110.dtb: leds: 'app', 'power', 'wlan' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Acked-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20221125144118.476905-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The preferred name suffix for properties with single and multiple GPIOs
is "gpios". Linux GPIO core code supports both. Bindings are going to
expect the "gpios" one:
omap3-echo.dtb: lp5523A@32: 'enable-gpio' does not match any of the regexes: '^led@[0-8]$', '^multi-led@[0-8]$', 'pinctrl-[0-9]+'
Acked-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20221127203034.54092-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The node names should be generic and DT schema expects certain pattern:
omap3-beagle-ab4.dtb: leds: 'heartbeat', 'mmc', 'pmu_stat' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Acked-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20221127203034.54092-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The node names should be generic and DT schema expects certain pattern:
logicpd-torpedo-37xx-devkit.dtb: leds: 'user0' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Acked-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20221125144122.476962-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 6.2, please pull the following:
- Linus adds support for the D-Link DWL-8610AP which is based upon the
BCM53016 SoC and the D-Link DIR-890L routers
- Maxime resolves a long standing issue affecting Raspberry Pi devices
by switching entirely over to the VPU firmware clock provider rather
than mixing the "bare metal" clock driver and VPU
- Rafal corrects the description of the TP-Link router partitions to
use the "safeloader" partition parser
- Stefan fixes a number of invalid underscores in the bcm283x DTS files
and also moves the ACT LED into a separate DTS include file for better
re-use
- Krzysztof aligns the LEDs DT nodes to the proper schema format
- Pierre adds missing cache properties to various SoCs
* tag 'arm-soc/for-6.2/devicetree' of https://github.com/Broadcom/stblinux:
arm: dts: Update cache properties for broadcom
ARM: dts: broadcom: align LED node names with dtschema
ARM: dts: bcm283x: Move ACT LED into separate dtsi
ARM: dts: bcm283x: Fix underscores in node names
ARM: dts: BCM5301X: Correct description of TP-Link partitions
ARM: dts: bcm47094: Add devicetree for D-Link DIR-890L
dt-bindings: ARM: add bindings for the D-Link DIR-890L
ARM: dts: bcm2835-rpi: Use firmware clocks for display
ARM: dts: bcm283x: Remove bcm2835-rpi-common.dtsi from SoC DTSI
ARM: dts: bcm53016: Add devicetree for D-Link DWL-8610AP
dt-bindings: ARM: add bindings for the D-Link DWL-8610AP
Link: https://lore.kernel.org/r/20221129191755.542584-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/dt
Armv8 Juno/FVP updates for v6.2
Just few addtions including updates to cache information on various
platforms to align well with the bindings, addition of cache information
on FVP Rev C model, addition of SPE to Foundation model and updates to
LED node names.
* tag 'juno-updates-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
ARM: dts: vexpress: align LED node names with dtschema
arm64: dts: fvp: Add information about L1 and L2 caches
arm64: dts: fvp: Add SPE to Foundation FVP
arm64: dts: Update cache properties for Arm Ltd platforms
arm64: dts: juno: Add thermal critical trip points
Link: https://lore.kernel.org/r/20221129115111.2464233-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
TEMP/TO REMOVE"
This reverts commit fb4ce97d9c5daafe100a83670c697b92c9d1bb45.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Link: https://lore.kernel.org/r/20221128133339.25055-1-alexandre.torgue@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt
mvebu dt for 6.2 (part 1)
Fix assigned-addresses for every PCIe Root Port
Align LED node names with dtschema
Add a new kirkwood based board: Zyxel NSA310S
Fix compatible string for gpios for Armada 38x and 39x
Add interrupts for watchdog on Armada XP
Turris Omnia (Armada 385 based):
- Add switch port 6 node
- Add ethernet aliases
Switch to using gpiod API in pm-board code
* tag 'mvebu-dt-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: dts: armada-xp: add interrupts for watchdog
ARM: dts: armada: align LED node names with dtschema
ARM: mvebu: switch to using gpiod API in pm-board code
ARM: dts: armada-39x: Fix compatible string for gpios
ARM: dts: armada-38x: Fix compatible string for gpios
ARM: dts: turris-omnia: Add switch port 6 node
ARM: dts: turris-omnia: Add ethernet aliases
ARM: dts: armada-39x: Fix assigned-addresses for every PCIe Root Port
ARM: dts: armada-38x: Fix assigned-addresses for every PCIe Root Port
ARM: dts: armada-375: Fix assigned-addresses for every PCIe Root Port
ARM: dts: armada-xp: Fix assigned-addresses for every PCIe Root Port
ARM: dts: armada-370: Fix assigned-addresses for every PCIe Root Port
ARM: dts: dove: Fix assigned-addresses for every PCIe Root Port
ARM: dts: kirkwood: Add Zyxel NSA310S board
Link: https://lore.kernel.org/r/87cz979adf.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
AT91 DT for 6.2 #3
It contains:
- proper power rail description for SDMMC devices available on
SAMA7G5-EK
- OTP controller has been added for LAN966X devices
* tag 'at91-dt-6.2-3' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: lan966x: Add otp support
ARM: dts: at91: sama7g5ek: align power rails for sdmmc0/1
Link: https://lore.kernel.org/r/20221125140525.384928-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/dt
Devicetree related musb changes for omap3 for v6.2
Recent musb driver regressions eposed two issues for musb legacy
probing. The changes to use device_set_of_node_from_dev() confuse
the legacy interconnect code. And we now have to manually populate
the musb core irq resources.
The musb driver has a fix for these, but it's not a good long term
solution. To fix the issue properly, let's just update musb to
probe with ti-sysc interconnect driver with proper devicetree data.
This allows dropping most of the musb driver workaround later on.
And with these changes we have the omap2430 musb glue layer behaving
the same way for all the SoCs using it.
We need to patch the ti-sysc driver quirks, and add devicetree
data to make things work. And we want to drop the legacy data too
to avoid pointless warnings.
As we have a musb driver workaround, these changes are not needed as
fixes and can wait for the merge window.
* tag 'musb-for-v6.2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Drop legacy hwmod data for omap3 otg
ARM: dts: Update omap3 musb to probe with ti-sysc
bus: ti-sysc: Add otg quirk flags for omap3 musb
Link: https://lore.kernel.org/r/pull-1669364566-84575@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/dt
Devicetree fixes for omaps for v6.2
Two devicetree fixes for omaps. These fixes are not urgent and
can wait for the merge window:
- Fix up the node names and missing #pwm-cells property for
ti,omap-dmtimer-pwm to avoid warnings when the the related
yaml binding gets merged
- Fix TDA998x port addressing
* tag 'omap-for-v6.2/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Unify pwm-omap-dmtimer node names
ARM: dts: am335x: Fix TDA998x ports addressing
ARM: dts: am335x-pcm-953: Define fixed regulators in root node
Link: https://lore.kernel.org/r/pull-1669363695-856423@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The node names should be generic and DT schema expects certain pattern:
socfpga_arria5_socdk.dtb: leds: 'hps0', 'hps1', 'hps2', 'hps3' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
The DeviceTree Specification v0.3 specifies that the cache node
'compatible' and 'cache-level' properties are 'required'. Cf.
s3.8 Multi-level and Shared Cache Nodes
The 'cache-unified' property should be present if one of the
properties for unified cache is present ('cache-size', ...).
Update the Device Trees accordingly.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://lore.kernel.org/r/20221122163208.3810985-2-pierre.gondois@arm.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
The node names should be generic and DT schema expects certain pattern:
bcm4708-asus-rt-ac68u.dtb: leds: 'logo', 'power', 'usb2', 'usb3' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221125144128.477059-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
The first interrupt is for the regular watchdog timeout. Normally the
RSTOUT line will trigger a reset before this interrupt fires but on
systems with a non-standard reset it may still trigger.
The second interrupt is for a timer1 which is used as a pre-timeout for
the watchdog.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
The node names should be generic and DT schema expects certain pattern:
armada-370-seagate-personal-cloud.dtb: gpio-leds: 'red-sata0' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
This switches PM code to use the newer gpiod API instead of legacy
gpio API that we want to retire.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Armada 39x supports per CPU interrupts for gpios, like Armada XP.
So add compatible string "marvell,armadaxp-gpio" for Armada 39x GPIO nodes.
Driver gpio-mvebu.c which handles both pre-XP and XP variants already
provides support for per CPU interrupts on XP and newer variants.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: d81a914fc630 ("ARM: dts: mvebu: armada-39x: add missing nodes describing GPIO's")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Armada 38x supports per CPU interrupts for gpios, like Armada XP. Pre-XP
variants like Armada 370 do not support per CPU interrupts for gpios.
So change compatible string for Armada 38x from "marvell,armada-370-gpio"
which indicates pre-XP variant to "marvell,armadaxp-gpio" which indicates
XP variant or new.
Driver gpio-mvebu.c which handles both pre-XP and XP variants already
provides support for per CPU interrupts on XP and newer variants.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 7cb2acb3fbae ("ARM: dts: mvebu: Add PWM properties for armada-38x")
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Switch port 6 is connected to eth0, so add appropriate device tree node for it.
Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
This allows bootloader to correctly pass MAC addresses used by bootloader
to individual interfaces into kernel device tree.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.
Fixes: 538da83ddbea ("ARM: mvebu: add Device Tree files for Armada 39x SoC and board")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.
Fixes: 0d3d96ab0059 ("ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.
Fixes: 4de59085091f ("ARM: mvebu: add Device Tree description of the Armada 375 SoC")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.
Fixes: 9d8f44f02d4a ("arm: mvebu: add PCIe Device Tree informations for Armada XP")
Fixes: 12b69a599745 ("ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable")
Fixes: 2163e61c92d9 ("ARM: mvebu: fix second and third PCIe unit of Armada XP mv78260")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.
Fixes: a09a0b7c6ff1 ("arm: mvebu: add PCIe Device Tree informations for Armada 370")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.
Fixes: 74ecaa403a74 ("ARM: dove: add PCIe controllers to SoC DT")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Zyxel NSA310S is a NAS based on Marvell kirkwood SoC.
Specification:
- Processor Marvell 88F6702 1 GHz
- 256MB RAM
- 128MB NAND
- 1x GBE LAN port (PHY: Marvell 88E1318)
- 2x USB 2.0
- 1x SATA
- 3x button
- 7x leds
- serial on J1 connector (115200 8N1) (GND-NOPIN-RX-TX-VCC)
Tested-by: Tony Dinh <mibodhi@gmail.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Acked-by: Adam Baker <linux@baker-net.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
The node names should be generic and DT schema expects certain pattern.
vexpress-v2p-ca9.dtb: leds: 'user1', 'user2', 'user3', 'user4', 'user5', 'user6', 'user7', 'user8' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221125144112.476817-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Add OTP (one time programmable) support.
The both lan966x SocS (lan9662 and lan9668) have the same OTP IP.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220916194946.2869510-1-horatiu.vultur@microchip.com
|
|
On this board SDMMC0 has a 1.8 signaled eMMC device powered at
3.3V. Hence, correctly describe the connected rails from the PMIC.
SDMMC1 is connected to a voltage switch that can change from
3.3V to 1.8V by a hardware controlled pin.
However SDMMC1 at the moment works only in 3.3V mode (default speed,
no UHS-I modes), thus connect the signaling to the 3.3V rail.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
[claudiu.beznea: reshaped a bit the commit message]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20221124154610.246790-1-eugen.hristev@microchip.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into soc/dt
Nuvoton device tree updates for 6.2
- Update fix-partition syntax
- WPCM450 updates for SPI controller, clock, watchdog, serial
- GPIO line names for Supermicro X9SCI-LN4F BMC
* tag 'nuvoton-6.2-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: dts: nuvoton: wpcm450: Add missing aliases for serial0/serial1
ARM: dts: wpcm450: Enable watchdog by default
ARM: dts: wpcm450: Add clock controller node
ARM: dts: wpcm450-supermicro-x9sci-ln4f: Add SPI flash
ARM: dts: wpcm450: Add FIU SPI controller node
ARM: dts: nuvoton: Remove bogus unit addresses from fixed-partition nodes
ARM: dts: nuvoton,wpcm450-supermicro-x9sci-ln4f: Add GPIO line names
Link: https://lore.kernel.org/r/CACPK8XffL5_L5D_ZGQid0r4h0wfTc+XBGUO1-0QW7ErPPrrvEQ@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into soc/dt
ASPEED device tree updates for 6.2
- New machines
* IBM Bonnell AST2600 BMC, for a Power10 server
* Delta AHE-50DC AST1250 BMC, for a 1U Open19 power shelf
- Removed machines
* IBM Mihawk AST2500 BMC, a Power9 server similar to Witherspoon
- Fixes and updates for bletchley, mtjade/mtmitchell, rainier/everest
* tag 'aspeed-6.2-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: dts: aspeed: mtjade: Add SMPro nodes
ARM: dts: aspeed: mtjade,mtmitchell: Add BMC SSIF nodes
ARM: dts: aspeed: Add Delta AHE-50DC BMC
dt-bindings: arm: aspeed: document Delta AHE-50DC BMC
ARM: dts: aspeed: rainier: Fix pca9551 nodes
ARM: dts: aspeed: p10bmc: Add occ-hwmon nodes
ARM: dts: aspeed-g6: Add aliases for mdio nodes
ARM: dts: aspeed: Remove Mihawk
ARM: dts: aspeed: rainier,everest: Move reserved memory regions
ARM: dts: aspeed: Add IBM Bonnell system BMC devicetree
ARM: dts: aspeed: bletchley: Enable emmc and ehci1
ARM: dts: aspeed: bletchley: Update and fix gpio-line-names
ARM: dts: aspeed: bletchley: Update fusb302 nodes
ARM: dts: aspeed: bletchley: Bind presence-sledX pins via gpio-keys
ARM: dts: aspeed: bletchley: Disable GPIOV2 pull-down
ARM: dts: aspeed: bletchley: Change LED sys_log_id to active low
Link: https://lore.kernel.org/r/CACPK8Xfsc8BaL_qAgV+3Rk-AFcQoDVfTpMzHvq_rR-UYqwpNNQ@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
ARM: tegra: Device tree changes for v6.2-rc1
This fixes various minor issues in device trees that are flagged by the
DT validation tools.
* tag 'tegra-for-6.2-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Remove duplicate pin entry in pinmux
ARM: tegra: Remove unused interrupt-parent properties
ARM: tegra: Fix nvidia,io-reset properties
ARM: tegra: Add missing power-supply for panels
ARM: tegra: Fixup pinmux node names
ARM: tegra: Use correct compatible string for ASUS TF101 panel
Link: https://lore.kernel.org/r/20221119012025.3968358-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into soc/dt
SoCFPGA dts updates for v6.2
- Use the "clk-phase-sd-hs" property for SDMMC
- Remove the "clk-phase" fom the sdmmc_clk that is no longer used
- Clean dtschema for mmc node
- Increase NAND partition for Arria10
* tag 'socfpga_dts_updates_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: socfpga: Add clk-phase-sd-hs property to the sdmmc node
arm: dts: socfpga: Add clk-phase-sd-hs property to the sdmmc node
arm: dts: socfpga: remove "clk-phase" in sdmmc_clk
arm: dts: socfpga: align mmc node names with dtschema
ARM: dts: socfpga: arria10: Increase NAND boot partition size
Link: https://lore.kernel.org/r/20221121163259.341974-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
There is no reg property for pwm-omap-dmtimer.
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
With complete devicetree data available to probe with ti-sysc interconnect
target module driver, we can now drop the related SoC data.
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Tested-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can drop the legacy booting for the related musb driver if we update
the omap3 SoCs variants to boot using ti-sysc interconnect target module.
devicetree@vger.kernel.org
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Tested-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Fix addressing in the NXP TDA998x HDMI transmitters' subnodes:
- Add missing #{address,size}-cells properties to ports capsule,
- Add missing reg properties to port child nodes,
- Drop bogus unit addresses from endpoint grandchildren nodes.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Message-Id: <e9ac64d29bc18b3b394fd9a2abbfeafacc624f98.1669047037.git.geert+renesas@glider.be>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Without these, /chosen/stdout-path = "serial0:115200n8" does not work.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221008130822.1227104-1-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
