summaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2022-10-16Merge tag 'random-6.1-rc1-for-linus' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull more random number generator updates from Jason Donenfeld: "This time with some large scale treewide cleanups. The intent of this pull is to clean up the way callers fetch random integers. The current rules for doing this right are: - If you want a secure or an insecure random u64, use get_random_u64() - If you want a secure or an insecure random u32, use get_random_u32() The old function prandom_u32() has been deprecated for a while now and is just a wrapper around get_random_u32(). Same for get_random_int(). - If you want a secure or an insecure random u16, use get_random_u16() - If you want a secure or an insecure random u8, use get_random_u8() - If you want secure or insecure random bytes, use get_random_bytes(). The old function prandom_bytes() has been deprecated for a while now and has long been a wrapper around get_random_bytes() - If you want a non-uniform random u32, u16, or u8 bounded by a certain open interval maximum, use prandom_u32_max() I say "non-uniform", because it doesn't do any rejection sampling or divisions. Hence, it stays within the prandom_*() namespace, not the get_random_*() namespace. I'm currently investigating a "uniform" function for 6.2. We'll see what comes of that. By applying these rules uniformly, we get several benefits: - By using prandom_u32_max() with an upper-bound that the compiler can prove at compile-time is ≤65536 or ≤256, internally get_random_u16() or get_random_u8() is used, which wastes fewer batched random bytes, and hence has higher throughput. - By using prandom_u32_max() instead of %, when the upper-bound is not a constant, division is still avoided, because prandom_u32_max() uses a faster multiplication-based trick instead. - By using get_random_u16() or get_random_u8() in cases where the return value is intended to indeed be a u16 or a u8, we waste fewer batched random bytes, and hence have higher throughput. This series was originally done by hand while I was on an airplane without Internet. Later, Kees and I worked on retroactively figuring out what could be done with Coccinelle and what had to be done manually, and then we split things up based on that. So while this touches a lot of files, the actual amount of code that's hand fiddled is comfortably small" * tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: prandom: remove unused functions treewide: use get_random_bytes() when possible treewide: use get_random_u32() when possible treewide: use get_random_{u8,u16}() when possible, part 2 treewide: use get_random_{u8,u16}() when possible, part 1 treewide: use prandom_u32_max() when possible, part 2 treewide: use prandom_u32_max() when possible, part 1
2022-10-14Merge tag 'arm-fixes-6.1-1' of ↵Linus Torvalds4-11/+10
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "These are three fixes for build warnings that came in during the merge window" * tag 'arm-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: mmp: Make some symbols static ARM: spear6xx: Staticize few definitions clk: spear: Move prototype to accessible header
2022-10-12Merge tag 'mm-nonmm-stable-2022-10-11' of ↵Linus Torvalds2-7/+0
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - hfs and hfsplus kmap API modernization (Fabio Francesco) - make crash-kexec work properly when invoked from an NMI-time panic (Valentin Schneider) - ntfs bugfixes (Hawkins Jiawei) - improve IPC msg scalability by replacing atomic_t's with percpu counters (Jiebin Sun) - nilfs2 cleanups (Minghao Chi) - lots of other single patches all over the tree! * tag 'mm-nonmm-stable-2022-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (71 commits) include/linux/entry-common.h: remove has_signal comment of arch_do_signal_or_restart() prototype proc: test how it holds up with mapping'less process mailmap: update Frank Rowand email address ia64: mca: use strscpy() is more robust and safer init/Kconfig: fix unmet direct dependencies ia64: update config files nilfs2: replace WARN_ONs by nilfs_error for checkpoint acquisition failure fork: remove duplicate included header files init/main.c: remove unnecessary (void*) conversions proc: mark more files as permanent nilfs2: remove the unneeded result variable nilfs2: delete unnecessary checks before brelse() checkpatch: warn for non-standard fixes tag style usr/gen_init_cpio.c: remove unnecessary -1 values from int file ipc/msg: mitigate the lock contention with percpu counter percpu: add percpu_counter_add_local and percpu_counter_sub_local fs/ocfs2: fix repeated words in comments relay: use kvcalloc to alloc page array in relay_alloc_page_array proc: make config PROC_CHILDREN depend on PROC_FS fs: uninline inode_maybe_inc_iversion() ...
2022-10-11treewide: use get_random_{u8,u16}() when possible, part 1Jason A. Donenfeld1-1/+1
Rather than truncate a 32-bit value to a 16-bit value or an 8-bit value, simply use the get_random_{u8,u16}() functions, which are faster than wasting the additional bytes from a 32-bit value. This was done mechanically with this coccinelle script: @@ expression E; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; typedef __be16; typedef __le16; typedef u8; @@ ( - (get_random_u32() & 0xffff) + get_random_u16() | - (get_random_u32() & 0xff) + get_random_u8() | - (get_random_u32() % 65536) + get_random_u16() | - (get_random_u32() % 256) + get_random_u8() | - (get_random_u32() >> 16) + get_random_u16() | - (get_random_u32() >> 24) + get_random_u8() | - (u16)get_random_u32() + get_random_u16() | - (u8)get_random_u32() + get_random_u8() | - (__be16)get_random_u32() + (__be16)get_random_u16() | - (__le16)get_random_u32() + (__le16)get_random_u16() | - prandom_u32_max(65536) + get_random_u16() | - prandom_u32_max(256) + get_random_u8() | - E->inet_id = get_random_u32() + E->inet_id = get_random_u16() ) @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; identifier v; @@ - u16 v = get_random_u32(); + u16 v = get_random_u16(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u8; identifier v; @@ - u8 v = get_random_u32(); + u8 v = get_random_u8(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; u16 v; @@ - v = get_random_u32(); + v = get_random_u16(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u8; u8 v; @@ - v = get_random_u32(); + v = get_random_u8(); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Examine limits @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value < 256: coccinelle.RESULT = cocci.make_ident("get_random_u8") elif value < 65536: coccinelle.RESULT = cocci.make_ident("get_random_u16") else: print("Skipping large mask of %s" % (literal)) cocci.include_match(False) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; identifier add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + (RESULT() & LITERAL) Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11treewide: use prandom_u32_max() when possible, part 1Jason A. Donenfeld1-1/+1
Rather than incurring a division or requesting too many random bytes for the given range, use the prandom_u32_max() function, which only takes the minimum required bytes from the RNG and avoids divisions. This was done mechanically with this coccinelle script: @basic@ expression E; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u64; @@ ( - ((T)get_random_u32() % (E)) + prandom_u32_max(E) | - ((T)get_random_u32() & ((E) - 1)) + prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2) | - ((u64)(E) * get_random_u32() >> 32) + prandom_u32_max(E) | - ((T)get_random_u32() & ~PAGE_MASK) + prandom_u32_max(PAGE_SIZE) ) @multi_line@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; identifier RAND; expression E; @@ - RAND = get_random_u32(); ... when != RAND - RAND %= (E); + RAND = prandom_u32_max(E); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Add one to the literal. @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1: print("Skipping 0x%x for cleanup elsewhere" % (value)) cocci.include_match(False) elif value & (value + 1) != 0: print("Skipping 0x%x because it's not a power of two minus one" % (value)) cocci.include_match(False) elif literal.startswith('0x'): coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1)) else: coccinelle.RESULT = cocci.make_expr("%d" % (value + 1)) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; expression add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + prandom_u32_max(RESULT) @collapse_ret@ type T; identifier VAR; expression E; @@ { - T VAR; - VAR = (E); - return VAR; + return E; } @drop_var@ type T; identifier VAR; @@ { - T VAR; ... when != VAR } Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: KP Singh <kpsingh@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11Merge tag 'pinctrl-v6.1-1' of ↵Linus Torvalds1-15/+0
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "There is nothing exciting going on, no core changes, just a few drivers and cleanups. New drivers: - Cypress CY8C95x0 chip pin control support, along with an immediate cleanup - Mediatek MT8188 SoC pin control support - Qualcomm SM8450 and SC8280XP LPASS (low power audio subsystem) pin control support - Qualcomm PM7250, PM8450 - Rockchip RV1126 SoC pin control support Improvements: - Fix some missing pins in the Armada 37xx driver - Convert Broadcom and Nomadik drivers to use PINCTRL_PINGROUP() macro - Fix some GPIO irq_chips to be immutable - Massive Qualcomm device tree binding cleanup, with more to come" * tag 'pinctrl-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (119 commits) MAINTAINERS: adjust STARFIVE JH7100 PINCTRL DRIVER after file movement pinctrl: starfive: Rename "pinctrl-starfive" to "pinctrl-starfive-jh7100" pinctrl: Create subdirectory for StarFive drivers dt-bindings: pinctrl: st,stm32: Document interrupt-controller property dt-bindings: pinctrl: st,stm32: Document gpio-hog pattern property dt-bindings: pinctrl: st,stm32: Document gpio-line-names pinctrl: st: stop abusing of_get_named_gpio() pinctrl: wpcm450: Correct the fwnode_irq_get() return value check pinctrl: bcm: Remove unused struct bcm6328_pingroup pinctrl: qcom: restrict drivers per ARM/ARM64 pinctrl: bcm: ns: Remove redundant dev_err call gpio: rockchip: request GPIO mux to pinctrl when setting direction pinctrl: rockchip: add pinmux_ops.gpio_set_direction callback pinctrl: cy8c95x0: Align function names in cy8c95x0_pmxops pinctrl: cy8c95x0: Drop atomicity on operations on push_pull pinctrl: cy8c95x0: Lock register accesses in cy8c95x0_set_mux() pinctrl: sunxi: sun50i-h5: Switch to use dev_err_probe() helper pinctrl: stm32: Switch to use dev_err_probe() helper dt-bindings: qcom-pmic-gpio: Add PM7250B and PM8450 bindings pinctrl: qcom: spmi-gpio: Add compatible for PM7250B ...
2022-10-10Merge tag 'mm-stable-2022-10-08' of ↵Linus Torvalds7-7/+7
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Yu Zhao's Multi-Gen LRU patches are here. They've been under test in linux-next for a couple of months without, to my knowledge, any negative reports (or any positive ones, come to that). - Also the Maple Tree from Liam Howlett. An overlapping range-based tree for vmas. It it apparently slightly more efficient in its own right, but is mainly targeted at enabling work to reduce mmap_lock contention. Liam has identified a number of other tree users in the kernel which could be beneficially onverted to mapletrees. Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat at [1]. This has yet to be addressed due to Liam's unfortunately timed vacation. He is now back and we'll get this fixed up. - Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses clang-generated instrumentation to detect used-unintialized bugs down to the single bit level. KMSAN keeps finding bugs. New ones, as well as the legacy ones. - Yang Shi adds a userspace mechanism (madvise) to induce a collapse of memory into THPs. - Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to support file/shmem-backed pages. - userfaultfd updates from Axel Rasmussen - zsmalloc cleanups from Alexey Romanov - cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and memory-failure - Huang Ying adds enhancements to NUMA balancing memory tiering mode's page promotion, with a new way of detecting hot pages. - memcg updates from Shakeel Butt: charging optimizations and reduced memory consumption. - memcg cleanups from Kairui Song. - memcg fixes and cleanups from Johannes Weiner. - Vishal Moola provides more folio conversions - Zhang Yi removed ll_rw_block() :( - migration enhancements from Peter Xu - migration error-path bugfixes from Huang Ying - Aneesh Kumar added ability for a device driver to alter the memory tiering promotion paths. For optimizations by PMEM drivers, DRM drivers, etc. - vma merging improvements from Jakub Matěn. - NUMA hinting cleanups from David Hildenbrand. - xu xin added aditional userspace visibility into KSM merging activity. - THP & KSM code consolidation from Qi Zheng. - more folio work from Matthew Wilcox. - KASAN updates from Andrey Konovalov. - DAMON cleanups from Kaixu Xia. - DAMON work from SeongJae Park: fixes, cleanups. - hugetlb sysfs cleanups from Muchun Song. - Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core. Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1] * tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits) hugetlb: allocate vma lock for all sharable vmas hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer hugetlb: fix vma lock handling during split vma and range unmapping mglru: mm/vmscan.c: fix imprecise comments mm/mglru: don't sync disk for each aging cycle mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol mm: memcontrol: use do_memsw_account() in a few more places mm: memcontrol: deprecate swapaccounting=0 mode mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled mm/secretmem: remove reduntant return value mm/hugetlb: add available_huge_pages() func mm: remove unused inline functions from include/linux/mm_inline.h selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd selftests/vm: add thp collapse shmem testing selftests/vm: add thp collapse file and tmpfs testing selftests/vm: modularize thp collapse memory operations selftests/vm: dedup THP helpers mm/khugepaged: add tracepoint to hpage_collapse_scan_file() mm/madvise: add file and shmem support to MADV_COLLAPSE ...
2022-10-10Merge tag 'dma-mapping-6.1-2022-10-10' of ↵Linus Torvalds2-3/+8
git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - fix a regression in the ARM dma-direct conversion (Christoph Hellwig) - use memcpy_{from,to}_page (Fabio M. De Francesco) - cleanup the swiotlb MAINTAINERS entry (Lukas Bulwahn) - make SG table pool allocation less fragile (Masahiro Yamada) - don't panic on swiotlb initialization failure (Robin Murphy) * tag 'dma-mapping-6.1-2022-10-10' of git://git.infradead.org/users/hch/dma-mapping: ARM/dma-mapping: remove the dma_coherent member of struct dev_archdata ARM/dma-mappіng: don't override ->dma_coherent when set from a bus notifier lib/sg_pool: change module_init(sg_pool_init) to subsys_initcall MAINTAINERS: merge SWIOTLB SUBSYSTEM into DMA MAPPING HELPERS swiotlb: don't panic! swiotlb: replace kmap_atomic() with memcpy_{from,to}_page()
2022-10-10Merge tag 'v6.1-p1' of ↵Linus Torvalds9-93/+170
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Feed untrusted RNGs into /dev/random - Allow HWRNG sleeping to be more interruptible - Create lib/utils module - Setting private keys no longer required for akcipher - Remove tcrypt mode=1000 - Reorganised Kconfig entries Algorithms: - Load x86/sha512 based on CPU features - Add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher Drivers: - Add HACE crypto driver aspeed" * tag 'v6.1-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (124 commits) crypto: aspeed - Remove redundant dev_err call crypto: scatterwalk - Remove unused inline function scatterwalk_aligned() crypto: aead - Remove unused inline functions from aead crypto: bcm - Simplify obtain the name for cipher crypto: marvell/octeontx - use sysfs_emit() to instead of scnprintf() hwrng: core - start hwrng kthread also for untrusted sources crypto: zip - remove the unneeded result variable crypto: qat - add limit to linked list parsing crypto: octeontx2 - Remove the unneeded result variable crypto: ccp - Remove the unneeded result variable crypto: aspeed - Fix check for platform_get_irq() errors crypto: virtio - fix memory-leak crypto: cavium - prevent integer overflow loading firmware crypto: marvell/octeontx - prevent integer overflows crypto: aspeed - fix build error when only CRYPTO_DEV_ASPEED is enabled crypto: hisilicon/qm - fix the qos value initialization crypto: sun4i-ss - use DEFINE_SHOW_ATTRIBUTE to simplify sun4i_ss_debugfs crypto: tcrypt - add async speed test for aria cipher crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher crypto: aria - prepare generic module for optimized implementations ...
2022-10-10Merge tag 'kbuild-v6.1' of ↵Linus Torvalds2-5/+2
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Remove potentially incomplete targets when Kbuid is interrupted by SIGINT etc in case GNU Make may miss to do that when stderr is piped to another program. - Rewrite the single target build so it works more correctly. - Fix rpm-pkg builds with V=1. - List top-level subdirectories in ./Kbuild. - Ignore auto-generated __kstrtab_* and __kstrtabns_* symbols in kallsyms. - Avoid two different modules in lib/zstd/ having shared code, which potentially causes building the common code as build-in and modular back-and-forth. - Unify two modpost invocations to optimize the build process. - Remove head-y syntax in favor of linker scripts for placing particular sections in the head of vmlinux. - Bump the minimal GNU Make version to 3.82. - Clean up misc Makefiles and scripts. * tag 'kbuild-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (41 commits) docs: bump minimal GNU Make version to 3.82 ia64: simplify esi object addition in Makefile Revert "kbuild: Check if linker supports the -X option" kbuild: rebuild .vmlinux.export.o when its prerequisite is updated kbuild: move modules.builtin(.modinfo) rules to Makefile.vmlinux_o zstd: Fixing mixed module-builtin objects kallsyms: ignore __kstrtab_* and __kstrtabns_* symbols kallsyms: take the input file instead of reading stdin kallsyms: drop duplicated ignore patterns from kallsyms.c kbuild: reuse mksysmap output for kallsyms mksysmap: update comment about __crc_* kbuild: remove head-y syntax kbuild: use obj-y instead extra-y for objects placed at the head kbuild: hide error checker logs for V=1 builds kbuild: re-run modpost when it is updated kbuild: unify two modpost invocations kbuild: move vmlinux.o rule to the top Makefile kbuild: move .vmlinux.objs rule to Makefile.modpost kbuild: list sub-directories in ./Kbuild Makefile.compiler: replace cc-ifversion with compiler-specific macros ...
2022-10-10ARM: mmp: Make some symbols staticChen Lifu1-4/+4
These symbols pxa168_usb_phy_resources, pxa168_u2o_resources, pxa168_u2oehci_resources and pxa168_u2ootg_resources are not used outside of arch/arm/mach-mmp/devices.c, so mark them static. Fixes the following sparse warning: arch/arm/mach-mmp/devices.c:241:17: warning: symbol 'pxa168_usb_phy_resources' was not declared. Should it be static? arch/arm/mach-mmp/devices.c:262:17: warning: symbol 'pxa168_u2o_resources' was not declared. Should it be static? arch/arm/mach-mmp/devices.c:297:17: warning: symbol 'pxa168_u2oehci_resources' was not declared. Should it be static? arch/arm/mach-mmp/devices.c:324:17: warning: symbol 'pxa168_u2ootg_resources' was not declared. Should it be static? Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Chen Lifu <chenlifu@huawei.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-10ARM: spear6xx: Staticize few definitionsViresh Kumar1-4/+4
Fix warnings with clang like: arch/arm/mach-spear/spear6xx.c:365:13: warning: no previous prototype for function 'spear6xx_map_io' [-Wmissing-prototypes] by making few definitions static. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-10clk: spear: Move prototype to accessible headerViresh Kumar3-3/+2
Fixes the following W=1 kernel build warning(s): drivers/clk/spear/spear6xx_clock.c:116:13: warning: no previous prototype for function 'spear6xx_clk_init' [-Wmissing-prototypes] Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-09Merge tag 'efi-next-for-v6.1' of ↵Linus Torvalds3-2/+82
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI updates from Ard Biesheuvel: "A bit more going on than usual in the EFI subsystem. The main driver for this has been the introduction of the LoonArch architecture last cycle, which inspired some cleanup and refactoring of the EFI code. Another driver for EFI changes this cycle and in the future is confidential compute. The LoongArch architecture does not use either struct bootparams or DT natively [yet], and so passing information between the EFI stub and the core kernel using either of those is undesirable. And in general, overloading DT has been a source of issues on arm64, so using DT for this on new architectures is a to avoid for the time being (even if we might converge on something DT based for non-x86 architectures in the future). For this reason, in addition to the patch that enables EFI boot for LoongArch, there are a number of refactoring patches applied on top of which separate the DT bits from the generic EFI stub bits. These changes are on a separate topich branch that has been shared with the LoongArch maintainers, who will include it in their pull request as well. This is not ideal, but the best way to manage the conflicts without stalling LoongArch for another cycle. Another development inspired by LoongArch is the newly added support for EFI based decompressors. Instead of adding yet another arch-specific incarnation of this pattern for LoongArch, we are introducing an EFI app based on the existing EFI libstub infrastructure that encapulates the decompression code we use on other architectures, but in a way that is fully generic. This has been developed and tested in collaboration with distro and systemd folks, who are eager to start using this for systemd-boot and also for arm64 secure boot on Fedora. Note that the EFI zimage files this introduces can also be decompressed by non-EFI bootloaders if needed, as the image header describes the location of the payload inside the image, and the type of compression that was used. (Note that Fedora's arm64 GRUB is buggy [0] so you'll need a recent version or switch to systemd-boot in order to use this.) Finally, we are adding TPM measurement of the kernel command line provided by EFI. There is an oversight in the TCG spec which results in a blind spot for command line arguments passed to loaded images, which means that either the loader or the stub needs to take the measurement. Given the combinatorial explosion I am anticipating when it comes to firmware/bootloader stacks and firmware based attestation protocols (SEV-SNP, TDX, DICE, DRTM), it is good to set a baseline now when it comes to EFI measured boot, which is that the kernel measures the initrd and command line. Intermediate loaders can measure additional assets if needed, but with the baseline in place, we can deploy measured boot in a meaningful way even if you boot into Linux straight from the EFI firmware. Summary: - implement EFI boot support for LoongArch - implement generic EFI compressed boot support for arm64, RISC-V and LoongArch, none of which implement a decompressor today - measure the kernel command line into the TPM if measured boot is in effect - refactor the EFI stub code in order to isolate DT dependencies for architectures other than x86 - avoid calling SetVirtualAddressMap() on arm64 if the configured size of the VA space guarantees that doing so is unnecessary - move some ARM specific code out of the generic EFI source files - unmap kernel code from the x86 mixed mode 1:1 page tables" * tag 'efi-next-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (24 commits) efi/arm64: libstub: avoid SetVirtualAddressMap() when possible efi: zboot: create MemoryMapped() device path for the parent if needed efi: libstub: fix up the last remaining open coded boot service call efi/arm: libstub: move ARM specific code out of generic routines efi/libstub: measure EFI LoadOptions efi/libstub: refactor the initrd measuring functions efi/loongarch: libstub: remove dependency on flattened DT efi: libstub: install boot-time memory map as config table efi: libstub: remove DT dependency from generic stub efi: libstub: unify initrd loading between architectures efi: libstub: remove pointless goto kludge efi: libstub: simplify efi_get_memory_map() and struct efi_boot_memmap efi: libstub: avoid efi_get_memory_map() for allocating the virt map efi: libstub: drop pointless get_memory_map() call efi: libstub: fix type confusion for load_options_size arm64: efi: enable generic EFI compressed boot loongarch: efi: enable generic EFI compressed boot riscv: efi: enable generic EFI compressed boot efi/libstub: implement generic EFI zboot efi/libstub: move efi_system_table global var into separate object ...
2022-10-08Merge tag 'char-misc-6.1-rc1' of ↵Linus Torvalds2-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the large set of char/misc and other small driver subsystem changes for 6.1-rc1. Loads of different things in here: - IIO driver updates, additions, and changes. Probably the largest part of the diffstat - habanalabs driver update with support for new hardware and features, the second largest part of the diff. - fpga subsystem driver updates and additions - mhi subsystem updates - Coresight driver updates - gnss subsystem updates - extcon driver updates - icc subsystem updates - fsi subsystem updates - nvmem subsystem and driver updates - misc driver updates - speakup driver additions for new features - lots of tiny driver updates and cleanups All of these have been in the linux-next tree for a while with no reported issues" * tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits) w1: Split memcpy() of struct cn_msg flexible array spmi: pmic-arb: increase SPMI transaction timeout delay spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes spmi: pmic-arb: correct duplicate APID to PPID mapping logic spmi: pmic-arb: add support to dispatch interrupt based on IRQ status spmi: pmic-arb: check apid against limits before calling irq handler spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq spmi: pmic-arb: handle spurious interrupt spmi: pmic-arb: add a print in cleanup_irq drivers: spmi: Directly use ida_alloc()/free() MAINTAINERS: add TI ECAP driver info counter: ti-ecap-capture: capture driver support for ECAP Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items dt-bindings: counter: add ti,am62-ecap-capture.yaml counter: Introduce the COUNTER_COMP_ARRAY component type counter: Consolidate Counter extension sysfs attribute creation counter: Introduce the Count capture component counter: 104-quad-8: Add Signal polarity component counter: Introduce the Signal polarity component counter: interrupt-cnt: Implement watch_validate callback ...
2022-10-07Merge tag 'usb-6.1-rc1' of ↵Linus Torvalds7-15/+65
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt driver changes for 6.1-rc1. Nothing major in here, lots of little things with new devices supported and updates for a few drivers. Highlights include: - thunderbolt/USB4 devices supported a bit better than before, and some new ids to enable new hardware devices - USB gadget uvc updates for newer video formats and better v4l integration (the v4l portions were acked by those maintainers) - typec updates for tiny issues and more typec drivers for new chips. - xhci tiny updates for minor issues - big usb-serial ftdi_sio driver update to handle new devices better - lots of tiny dwc3 fixes and updates for the IP block that is showing up everywhere these days - dts updates for new devices being supported - other tiny janitorial and cleanups fixes for lots of different USB drivers. Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'usb-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits) usb: gadget: uvc: don't put item still in use usb: gadget: uvc: Fix argument to sizeof() in uvc_register_video() usb: host: ehci-exynos: switch to using gpiod API Revert "usb: dwc3: Don't switch OTG -> peripheral if extcon is present" Revert "USB: fixup for merge issue with "usb: dwc3: Don't switch OTG -> peripheral if extcon is present"" dt-bindings: usb: Convert FOTG210 to dt schema usb: mtu3: fix failed runtime suspend in host only mode USB: omap_udc: Fix spelling mistake: "tranceiver_ctrl" -> "transceiver_ctrl" usb: typec: ucsi_ccg: Disable UCSI ALT support on Tegra usb: typec: Replace custom implementation of device_match_fwnode() usb: typec: ucsi: Don't warn on probe deferral usb: add quirks for Lenovo OneLink+ Dock MAINTAINERS: switch dwc3 to Thinh usb: idmouse: fix an uninit-value in idmouse_open USB: PHY: JZ4770: Switch to use dev_err_probe() helper usb: phy: generic: Switch to use dev_err_probe() helper usb: ulpi: use DEFINE_SHOW_ATTRIBUTE to simplify ulpi_regs usb: cdns3: remove dead code usb: cdc-wdm: Use skb_put_data() instead of skb_put/memcpy pair usb: musb: sunxi: Switch to use dev_err_probe() helper ...
2022-10-07Merge tag 'tty-6.1-rc1' of ↵Linus Torvalds2-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big set of TTY and Serial driver updates for 6.1-rc1. Lots of cleanups in here, no real new functionality this time around, with the diffstat being that we removed more lines than we added! Included in here are: - termios unification cleanups from Al Viro, it's nice to finally get this work done - tty serial transmit cleanups in various drivers in preparation for more cleanup and unification in future releases (that work was not ready for this release) - n_gsm fixes and updates - ktermios cleanups and code reductions - dt bindings json conversions and updates for new devices - some serial driver updates for new devices - lots of other tiny cleanups and janitorial stuff. Full details in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (102 commits) serial: cpm_uart: Don't request IRQ too early for console port tty: serial: do unlock on a common path in altera_jtaguart_console_putc() tty: serial: unify TX space reads under altera_jtaguart_tx_space() tty: serial: use FIELD_GET() in lqasc_tx_ready() tty: serial: extend lqasc_tx_ready() to lqasc_console_putchar() tty: serial: allow pxa.c to be COMPILE_TESTed serial: stm32: Fix unused-variable warning tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMEL serial: 8250: Fix restoring termios speed after suspend serial: Deassert Transmit Enable on probe in driver-specific way serial: 8250_dma: Convert to use uart_xmit_advance() serial: 8250_omap: Convert to use uart_xmit_advance() MAINTAINERS: Solve warning regarding inexistent atmel-usart binding serial: stm32: Deassert Transmit Enable on ->rs485_config() serial: ar933x: Deassert Transmit Enable on ->rs485_config() tty: serial: atmel: Use FIELD_PREP/FIELD_GET tty: serial: atmel: Make the driver aware of the existence of GCLK tty: serial: atmel: Only divide Clock Divisor if the IP is USART tty: serial: atmel: Separate mode clearing between UART and USART dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock ...
2022-10-07Merge tag 'mfd-next-6.1' of ↵Linus Torvalds4-12/+3
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Frameworks: - Fix 'mfd_of_node_list' OF node entry resource leak New Drivers: - Add support for Ocelot VSC7512 Networking Chip - Add support for MediaTek MT6370 subPMIC - Add support for Richtek RT5120 (I2C) PMIC New Device Support: - Add support for Rockchip RV1126 and RK3588 to Syscon - Add support for Rockchip RK817 Battery Charger to RK808 - Add support for Silergy SY7636a Voltage Regulator to Simple MFD - Add support for Qualcomm PMP8074 PMIC to QCOM SPMI - Add support for Secure Update to Intel M10 BMC New Functionality: - Provide SSP type to Intel's LPSS (PCI) SPI driver Fix-ups: - Remove legacy / unused code; stmpe, intel_soc_pmic_crc, syscon - Unify / simplify; intel_soc_pmic_crc - Trivial reordering / spelling, etc; Makefile, twl-core - Convert to managed resources; intel_soc_pmic_crc - Use appropriate APIs; intel_soc_pmic_crc - strscpy() conversion; htc-i2cpld, lpc_ich, mfd-core - GPIOD conversion; htc-i2cpld, stmpe - Add missing header file includes; twl4030-irq - DT goodies; stmpe, mediatek,mt6370, x-powers,axp152, aspeed,ast2x00-scu, mediatek,mt8195-scpsys, qcom,spmi-pmic, syscon, qcom,tcsr, rockchip,rk817, sprd,ums512-glbreg, dlg,da9063 Bug Fixes: - Properly check return values; sm501, htc-i2cpld - Repair Two-Wire Bus Mode; da9062-core - Fix error handling; intel_soc_pmic_core, fsl-imx25-tsadc, lp8788, lp8788-irq" * tag 'mfd-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (60 commits) mfd: syscon: Remove repetition of the regmap_get_val_endian() mfd: ocelot-spi: Add missing MODULE_DEVICE_TABLE power: supply: Add charger driver for Rockchip RK817 dt-bindings: mfd: mt6370: Fix the indentation in the example mfd: da9061: Fix Failed to set Two-Wire Bus Mode. mfd: htc-i2cpld: Fix an IS_ERR() vs NULL bug in htcpld_core_probe() dt-bindings: mfd: qcom,tcsr: Drop simple-mfd from IPQ6018 mfd: sm501: Add check for platform_driver_register() dt-bindings: mfd: mediatek: Add scpsys compatible for mt8186 mfd: twl4030: Add missed linux/device.h header dt-bindings: mfd: dlg,da9063: Add missing regulator patterns dt-bindings: mfd: sprd: Add bindings for ums512 global registers mfd: intel_soc_pmic_chtdc_ti: Switch from __maybe_unused to pm_sleep_ptr() etc dt-bindings: mfd: syscon: Add rk3588 QoS register compatible mfd: stmpe: Switch to using gpiod API mfd: qcom-spmi-pmic: Add pm7250b compatible dt-bindings: mfd: Add missing (unevaluated|additional)Properties on child nodes mfd/omap1: htc-i2cpld: Convert to a pure GPIO driver mfd: intel-m10-bmc: Add d5005 bmc secure update driver dt-bindings: mfd: syscon: Drop ref from reg-io-width ...
2022-10-07Merge tag 'ata-6.1-rc1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ata updates from Damien Le Moal: - Print the timeout value for internal command failures due to a timeout (from Tomas) - Improve parameter names in ata_dev_set_feature() to clarify this function use (from Niklas) - Improve the ahci driver low power mode setting initialization to allow more flexibility for the user (from Rafael) - Several patches to remove redundant variables in libata-core, libata-eh and the pata_macio driver and to fix typos in comments (from Jinpeng, Shaomin, Ye) - Some code simplifications and macro renaming (for clarity) in various functions of libata-core (from me) - Add a missing check for a potential failure of sata_scr_read() in sata_print_link_status() (from Li) - Cleanup of libata Kconfig PATA_PLATFORM and PATA_OF_PLATFORM options (from Lukas) - Cleanups of ata dt-bindings and improvements of libahci_platform, ahci and libahci code (from Serge) - New driver for Synopsys AHCI SATA controllers, based of the generic ahci code (from Serge). One compilation warning fix is added for this driver (from me) - Several fixes to macros used to discover a drive capabilities to be consistent with the ACS specifications (from Niklas) - A couple of simplifcations to some libata functions, removing unnecessary arguments (from Niklas) - An improvements to libata-eh code to avoid unnecessary link reset when revalidating a drive after a failed command. In practice, this extra, unneeded reset, reset does not cause any arm beyond slightly slowing down error recovery (from Niklas) * tag 'ata-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (45 commits) ata: libata-eh: avoid needless hard reset when revalidating link ata: libata: drop superfluous ata_eh_analyze_tf() parameter ata: libata: drop superfluous ata_eh_request_sense() parameter ata: fix ata_id_has_dipm() ata: fix ata_id_has_ncq_autosense() ata: fix ata_id_has_devslp() ata: fix ata_id_sense_reporting_enabled() and ata_id_has_sense_reporting() ata: libata-eh: Remove the unneeded result variable ata: ahci_st: Enable compile test ata: ahci_st: Fix compilation warning MAINTAINERS: Add maintainers for DWC AHCI SATA driver ata: ahci-dwc: Add Baikal-T1 AHCI SATA interface support ata: ahci-dwc: Add platform-specific quirks support dt-bindings: ata: ahci: Add Baikal-T1 AHCI SATA controller DT schema ata: ahci: Add DWC AHCI SATA controller support ata: libahci_platform: Add function returning a clock-handle by id dt-bindings: ata: ahci: Add DWC AHCI SATA controller DT schema ata: ahci: Introduce firmware-specific caps initialization ata: ahci: Convert __ahci_port_base to accepting hpriv as arguments ata: libahci: Don't read AHCI version twice in the save-config method ...
2022-10-06Merge tag 'arm-soc-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds65-557/+259
Pull ARM SoC updates from Arnd Bergmann: "The main changes this time are for the organization of the Kconfig files, introducing per-vendor top-level options on arm64 to match those on arm32, and making the platform selection on arm32 more uniform, in particular for the remaining StrongARM platforms that still have a couple of special cases compared to the more recent ones. I also did a cleanup of the old Footbridge platform, which was the last holdout for the phys_to_dma()/dma_to_phys() interface that is now completely gone from arm32, completing work started by Christoph Hellwig" * tag 'arm-soc-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (21 commits) ARM: aspeed: Kconfig: Fix indentation ARM: Drop CMDLINE_* dependency on ATAGS ARM: Drop CMDLINE_FORCE dependency on !ARCH_MULTIPLATFORM ARM: s3c: remove orphan declarations from arch/arm/mach-s3c/devs.h pxa: Drop if with an always false condition ARM: orion: fix include path ARM: shmobile: Drop selecting SOC_BUS arm64: renesas: Drop selecting SOC_BUS ARM: disallow PCI with MMU=n again ARM: footbridge: remove custom DMA address handling MAINTAINERS: Add BCM4908 maintainer to BCMBCA entry ARM: footbridge: move isa-dma support into footbridge ARM: footbridge: remove leftover from personal-server ARM: footbridge: remove addin mode arm64: Kconfig.platforms: Group NXP platforms together arm64: Kconfig.platforms: Re-organized Broadcom menu ARM: make ARCH_MULTIPLATFORM user-visible ARM: fix XIP_KERNEL dependencies ARM: Kconfig: clean up platform selection ARM: simplify machdirs/platdirs handling ...
2022-10-06Merge tag 'arm-dt-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds231-1773/+5743
Pull ARM devicetree updates from Arnd Bergmann: "Most of the changes fall into one of three categories: adding support for additional devices on existing machines, cleaning up issues found by the ongoing conversion to machine-readable bindings, and addressing minor mistakes in the existing DT data. Across SoC vendors, Qualcomm and Freescale stick out as getting the most updates, which corresponds to their dominance in the mobile phone and embedded industrial markets, respectively. There are 636 non-merge changeset in this branch, which is a little lower than most times, but more importantly we only add 36 machine files, which is about half of what we had the past few releases. Eight new SoCs are added, but all of them are variations of already supported SoC families, and most of them come with one reference board design from the SoC vendor: - Mediatek MT8186 is a Chromebook/Tablet type SoC, similar to the MT65xx series of phone SoCs, with two Cortex-A76 and six Cortex-A55 cores. - TI AM62A is another member of the K3 family with Cortex-A53 cores, this one is targetted at Video/Vision processing for industrial and automotive applications. - NXP i.MX8DXL is another chip for this market in the ever-growing i.MX8 family, this one again with two Cortex-A35 cores. - Renesas R-Car H3Ne-1.7G (R8A779MB) and R-Car V3H2 (R8A77980A) are minor updates of R8A77951 and R8A77980, respectively. - Qualcomm IPQ8064-v2.0, IPQ8062 and IPQ8065 are all variants of the IPQ8064 chip, with minimally different features. The AMD Pensando Elba and Apple M1 Ultra SoC support was getting close this time, but in the end did not make the cut. The new machines based on existing SoC support are fairly uneventful: - Sony Xperia 1 IV is a fairly recent phone based on Qualcomm Snapdragon 8 Gen 1. - Three Samsung phones based on Snapdragon 410: Galaxy E5, E7 and Grand Max. These are added for both 32-bit and 64-bit kernels, as they originally shipped running 32-bit code. - Two new servers using AST2600 BMCs: AMD DaytonaX and Ampere Mt. Mitchell - Three new machines based on Rockchips RK3399 and RK3566: Anberic RG353P and RG503, Pine64 Pinephone Pro, Open AI Lab - Multiple NXP i.MX6/i.MX8 based boards: Kontron SL/BL i.MX8MM OSM-S, i.MX8MM Gateworks GW7904, MSC SM2S-IMX8PLUS SoM and carrier board - Two development boards in the Microchip AT91 family: SAMA5D3-EDS and lan966x-pcb8290. - Minor variants of existing boards using Amlogic, Broadcom, Marvell, Rockchips, Freescale Layerscape and Socionext Uniphier SoCs" * tag 'arm-dt-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (617 commits) Revert "ARM: dts: BCM5301X: Add basic PCI controller properties" ARM: dts: s5pv210: correct double "pins" in pinmux node ARM: dts: exynos: fix polarity of VBUS GPIO of Origen arm64: dts: exynos: fix polarity of "enable" line of NFC chip in TM2 arm64: dts: uniphier: Add L2 cache node arm64: dts: uniphier: Remove compatible "snps,dw-pcie" from pcie node arm64: dts: uniphier: Fix opp-table node name for LD20 arm64: dts: uniphier: Add USB-device support for PXs3 reference board arm64: dts: uniphier: Add ahci controller nodes for PXs3 arm64: dts: uniphier: Use GIC interrupt definitions arm64: dts: uniphier: Rename gpio-hog nodes arm64: dts: uniphier: Rename usb-glue node for USB3 to usb-controller arm64: dts: uniphier: Rename usb-phy node for USB2 to usb-controller arm64: dts: uniphier: Rename pvtctl node to thermal-sensor ARM: dts: uniphier: Remove compatible "snps,dw-pcie-ep" from pcie-ep node ARM: dts: uniphier: Move interrupt-parent property to each child node in uniphier-support-card ARM: dts: uniphier: Add ahci controller nodes for PXs2 ARM: dts: uniphier: Add ahci controller nodes for Pro4 ARM: dts: uniphier: Use GIC interrupt definitions ARM: dts: uniphier: Rename gpio-hog node ...
2022-10-06Merge tag 'arm-drivers-6.1' of ↵Linus Torvalds1-4/+0
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM driver updates from Arnd Bergmann: "The drivers branch for 6.1 is a bit larger than for most releases. Most of the changes come from SoC maintainers for the drivers/soc subsystem: - A new driver for error handling on the NVIDIA Tegra 'control backbone' bus. - A new driver for Qualcomm LLCC/DDR bandwidth measurement - New Rockchip rv1126 and rk3588 power domain drivers - DT binding updates for memory controllers, older Rockchip SoCs, various Mediatek devices, Qualcomm SCM firmware - Minor updates to Hisilicon LPC bus, the Allwinner SRAM driver, the Apple rtkit firmware driver, Tegra firmware - Minor updates for SoC drivers (Samsung, Mediatek, Renesas, Tegra, Qualcomm, Broadcom, NXP, ...) There are also some separate subsystem with downstream maintainers that merge updates this way: - Various updates and new drivers in the memory controller subsystem for Mediatek and Broadcom SoCs - Small set of changes in preparation to add support for FF-A v1.1 specification later, in the Arm FF-A firmware subsystem - debugfs support in the PSCI firmware subsystem" * tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (149 commits) ARM: remove check for CONFIG_DEBUG_LL_SER3 firmware/psci: Add debugfs support to ease debugging firmware/psci: Print a warning if PSCI doesn't accept PC mode dt-bindings: memory: snps,dw-umctl2-ddrc: Extend schema with IRQs/resets/clocks props dt-bindings: memory: snps,dw-umctl2-ddrc: Replace opencoded numbers with macros dt-bindings: memory: snps,dw-umctl2-ddrc: Use more descriptive device name dt-bindings: memory: synopsys,ddrc-ecc: Detach Zynq DDRC controller support soc: sunxi: sram: Add support for the D1 system control soc: sunxi: sram: Export the LDO control register soc: sunxi: sram: Save a pointer to the OF match data soc: sunxi: sram: Return void from the release function soc: apple: rtkit: Add apple_rtkit_poll soc: imx: add i.MX93 media blk ctrl driver soc: imx: add i.MX93 SRC power domain driver soc: imx: imx8m-blk-ctrl: Use genpd_xlate_onecell soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl soc: imx: add i.MX8MP HDMI blk ctrl HDCP/HRV_MWR soc: imx: add icc paths for i.MX8MP hsio/hdmi blk ctrl soc: imx: add icc paths for i.MX8MP media blk ctrl ...
2022-10-06Merge tag 'arm-defconfig-6.1' of ↵Linus Torvalds53-101/+123
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM defconfig updates from Arnd Bergmann: "As usual, we enable newly added device drivers in the various defconfig files. This time, there is also a larger cleanup series that just reorders symbols according to what 'make savedefconfig' outputs and then tracks down the most common removed or renamed symbols on top" * tag 'arm-defconfig-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (43 commits) ARM: config: aspeed_g5: Enable PECI ARM: configs: aspeed_g4: Remove appended DTB and ATAG ARM: configs: aspeed: Refresh defconfigs ARM: config: aspeed: Enable namespaces ARM: configs: aspeed_g4: Enable IPV6 options ARM: configs: aspeed_g4: Enable OCC and NBD drivers ARM: configs: aspeed_g5: Enable MCTP stack ARM: configs: aspeed_g5: Add PL2303 USB serial driver ARM: configs: aspeed_g5: Add TPM TIS I2C driver ARM: configs: aspeed_g5: Add mp5023 driver ARM: configs: aspeed: Add support for USB flash drives arm64: configs: Enable all PMUs provided by Arm arm64: defconfig: Enable Synopsys DWC MSHC driver arm64: defconfig: Enabled SC8180x configs arm64: defconfig: Make TEGRA186_GPC_DMA built-in arm64: tegra: Enable Tegra SPI & QSPI in deconfig arm64: defconfig: enable newer Qualcomm SoC sound drivers ARM: config: ixp4xx: Disable legacy EEPROM driver arm64: defconfig: Enable devfreq cooling device arm64: defconfig: enable ARCH_NXP ...
2022-10-06Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds11-37/+99
Pull ARM updates from Russell King: - Print an un-hashed userspace PC on undefined instruction exception - Disable FDPIC ABI - Remove redundant vfp_flush/release_thread functions - Use raw_cpu_* rather than this_cpu_* in handle_bad_stack() - Avoid needlessly long backtraces when show_regs() is called - Fix an issue with stack traces through call_with_stack() - Avoid stack traces saving a duplicate exception PC value - Pass a void pointer to virt_to_page() in DMA mapping code - Fix kasan maps for modules when CONFIG_KASAN_VMALLOC=n - Show FDT region and page table level names in kernel page tables dump * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9246/1: dump: show page table level name ARM: 9245/1: dump: show FDT region ARM: 9242/1: kasan: Only map modules if CONFIG_KASAN_VMALLOC=n ARM: 9240/1: dma-mapping: Pass (void *) to virt_to_page() ARM: 9234/1: stacktrace: Avoid duplicate saving of exception PC value ARM: 9233/1: stacktrace: Skip frame pointer boundary check for call_with_stack() ARM: 9224/1: Dump the stack traces based on the parameter 'regs' of show_regs() ARM: 9232/1: Replace this_cpu_* with raw_cpu_* in handle_bad_stack() ARM: 9228/1: vfp: kill vfp_flush/release_thread() ARM: 9226/1: disable FDPIC ABI ARM: 9221/1: traps: print un-hashed user pc on undefined instruction
2022-10-06ARM/dma-mapping: remove the dma_coherent member of struct dev_archdataChristoph Hellwig2-4/+1
Since commit ae626eb97376 ("ARM/dma-mapping: use dma-direct unconditionally") only the dma_coherent flag in struct device is used, so remove the now write only flag in struct dev_archdata. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-10-06ARM/dma-mappіng: don't override ->dma_coherent when set from a bus notifierChristoph Hellwig1-2/+10
Commit ae626eb97376 ("ARM/dma-mapping: use dma-direct unconditionally") caused a regression on the mvebu platform, wherein devices that are dma-coherent are marked as dma-noncoherent, because although mvebu_hwcc_notifier() after that commit still marks then as coherent, the arm_coherent_dma_ops() function, which is called later, overwrites this setting, since it is being called from drivers/of/device.c with coherency parameter determined by of_dma_is_coherent(), and the device-trees do not declare the 'dma-coherent' property. Fix this by defaulting never clearing the dma_coherent flag in arm_coherent_dma_ops(). Fixes: ae626eb97376 ("ARM/dma-mapping: use dma-direct unconditionally") Reported-by: Marek Behún <kabel@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Tested-by: Marek Behún <kabel@kernel.org>
2022-10-05Revert "ARM: dts: BCM5301X: Add basic PCI controller properties"Arnd Bergmann1-12/+0
Adding the #address-cells/#size-cells properties without also adding the other required properties for PCI nodes causes new build warnings from dtc that now show up everywhere, rather than just while verifying the yaml bindings: arch/arm/boot/dts/bcm5301x.dtsi:240.21-246.5: Warning (pci_bridge): /axi@18000000/pcie@12000: missing ranges for PCI bridge (or not a bridge) arch/arm/boot/dts/bcm5301x.dtsi:248.21-254.5: Warning (pci_bridge): /axi@18000000/pcie@13000: missing ranges for PCI bridge (or not a bridge) arch/arm/boot/dts/bcm5301x.dtsi:256.21-262.5: Warning (pci_bridge): /axi@18000000/pcie@14000: missing ranges for PCI bridge (or not a bridge) arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' Revert it for now. Fixes: 61dc1e3850a6 ("ARM: dts: BCM5301X: Add basic PCI controller properties") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-04Merge tag 'i2c-for-6.1-rc1' of ↵Linus Torvalds1-8/+4
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - 'remove' callback converted to return void. Big change with trivial fixes all over the tree. Other subsystems depending on this change have been asked to pull an immutable topic branch for this. - new driver for Microchip PCI1xxxx switch - heavy refactoring of the Mellanox BlueField driver - we prefer async probe in the i801 driver now - the rest is usual driver updates (support for more SoCs, some refactoring, some feature additions) * tag 'i2c-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (37 commits) i2c: pci1xxxx: prevent signed integer overflow i2c: acpi: Replace zero-length array with DECLARE_FLEX_ARRAY() helper i2c: i801: Prefer async probe i2c: designware-pci: Use standard pattern for memory allocation i2c: designware-pci: Group AMD NAVI quirk parts together i2c: microchip: pci1xxxx: Add driver for I2C host controller in multifunction endpoint of pci1xxxx switch docs: i2c: slave-interface: return errno when handle I2C_SLAVE_WRITE_REQUESTED i2c: mlxbf: remove device tree support i2c: mlxbf: support BlueField-3 SoC i2c: cadence: Add standard bus recovery support i2c: mlxbf: add multi slave functionality i2c: mlxbf: support lock mechanism macintosh/ams: Adapt declaration of ams_i2c_remove() to earlier change i2c: riic: Use devm_platform_ioremap_resource() i2c: mlxbf: remove IRQF_ONESHOT dt-bindings: i2c: rockchip: add rockchip,rk3128-i2c dt-bindings: i2c: renesas,rcar-i2c: Add r8a779g0 support i2c: tegra: Add GPCDMA support i2c: scmi: Convert to be a platform driver i2c: rk3x: Add rv1126 support ...
2022-10-04Merge tag 'samsung-dt-dt64-6.1-2' of ↵Arnd Bergmann3-4/+4
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM and ARM64 changes for v6.1 Late cleanup and fixes for Samsung DTS: 1. Fix polarity of pins: - enable GPIO of NFC chip in Exynos5433 TM2 boards, - vbus GPIO of EHCI in Exynos4412 Origen board. 2. Correct name of pin configuration nodes - redundant "pins" in the name (no functional impact). * tag 'samsung-dt-dt64-6.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: s5pv210: correct double "pins" in pinmux node ARM: dts: exynos: fix polarity of VBUS GPIO of Origen arm64: dts: exynos: fix polarity of "enable" line of NFC chip in TM2 Link: https://lore.kernel.org/r/20221003073916.12588-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-04Merge tag 'net-next-6.1' of ↵Linus Torvalds1-0/+18
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Introduce and use a single page frag cache for allocating small skb heads, clawing back the 10-20% performance regression in UDP flood test from previous fixes. - Run packets which already went thru HW coalescing thru SW GRO. This significantly improves TCP segment coalescing and simplifies deployments as different workloads benefit from HW or SW GRO. - Shrink the size of the base zero-copy send structure. - Move TCP init under a new slow / sleepable version of DO_ONCE(). BPF: - Add BPF-specific, any-context-safe memory allocator. - Add helpers/kfuncs for PKCS#7 signature verification from BPF programs. - Define a new map type and related helpers for user space -> kernel communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF). - Allow targeting BPF iterators to loop through resources of one task/thread. - Add ability to call selected destructive functions. Expose crash_kexec() to allow BPF to trigger a kernel dump. Use CAP_SYS_BOOT check on the loading process to judge permissions. - Enable BPF to collect custom hierarchical cgroup stats efficiently by integrating with the rstat framework. - Support struct arguments for trampoline based programs. Only structs with size <= 16B and x86 are supported. - Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping sockets (instead of just TCP and UDP sockets). - Add a helper for accessing CLOCK_TAI for time sensitive network related programs. - Support accessing network tunnel metadata's flags. - Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open. - Add support for writing to Netfilter's nf_conn:mark. Protocols: - WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation (MLO) work (802.11be, WiFi 7). - vsock: improve support for SO_RCVLOWAT. - SMC: support SO_REUSEPORT. - Netlink: define and document how to use netlink in a "modern" way. Support reporting missing attributes via extended ACK. - IPSec: support collect metadata mode for xfrm interfaces. - TCPv6: send consistent autoflowlabel in SYN_RECV state and RST packets. - TCP: introduce optional per-netns connection hash table to allow better isolation between namespaces (opt-in, at the cost of memory and cache pressure). - MPTCP: support TCP_FASTOPEN_CONNECT. - Add NEXT-C-SID support in Segment Routing (SRv6) End behavior. - Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets. - Open vSwitch: - Allow specifying ifindex of new interfaces. - Allow conntrack and metering in non-initial user namespace. - TLS: support the Korean ARIA-GCM crypto algorithm. - Remove DECnet support. Driver API: - Allow selecting the conduit interface used by each port in DSA switches, at runtime. - Ethernet Power Sourcing Equipment and Power Device support. - Add tc-taprio support for queueMaxSDU parameter, i.e. setting per traffic class max frame size for time-based packet schedules. - Support PHY rate matching - adapting between differing host-side and link-side speeds. - Introduce QUSGMII PHY mode and 1000BASE-KX interface mode. - Validate OF (device tree) nodes for DSA shared ports; make phylink-related properties mandatory on DSA and CPU ports. Enforcing more uniformity should allow transitioning to phylink. - Require that flash component name used during update matches one of the components for which version is reported by info_get(). - Remove "weight" argument from driver-facing NAPI API as much as possible. It's one of those magic knobs which seemed like a good idea at the time but is too indirect to use in practice. - Support offload of TLS connections with 256 bit keys. New hardware / drivers: - Ethernet: - Microchip KSZ9896 6-port Gigabit Ethernet Switch - Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs - Analog Devices ADIN1110 and ADIN2111 industrial single pair Ethernet (10BASE-T1L) MAC+PHY. - Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP). - Ethernet SFPs / modules: - RollBall / Hilink / Turris 10G copper SFPs - HALNy GPON module - WiFi: - CYW43439 SDIO chipset (brcmfmac) - CYW89459 PCIe chipset (brcmfmac) - BCM4378 on Apple platforms (brcmfmac) Drivers: - CAN: - gs_usb: HW timestamp support - Ethernet PHYs: - lan8814: cable diagnostics - Ethernet NICs: - Intel (100G): - implement control of FCS/CRC stripping - port splitting via devlink - L2TPv3 filtering offload - nVidia/Mellanox: - tunnel offload for sub-functions - MACSec offload, w/ Extended packet number and replay window offload - significantly restructure, and optimize the AF_XDP support, align the behavior with other vendors - Huawei: - configuring DSCP map for traffic class selection - querying standard FEC statistics - querying SerDes lane number via ethtool - Marvell/Cavium: - egress priority flow control - MACSec offload - AMD/SolarFlare: - PTP over IPv6 and raw Ethernet - small / embedded: - ax88772: convert to phylink (to support SFP cages) - altera: tse: convert to phylink - ftgmac100: support fixed link - enetc: standard Ethtool counters - macb: ZynqMP SGMII dynamic configuration support - tsnep: support multi-queue and use page pool - lan743x: Rx IP & TCP checksum offload - igc: add xdp frags support to ndo_xdp_xmit - Ethernet high-speed switches: - Marvell (prestera): - support SPAN port features (traffic mirroring) - nexthop object offloading - Microchip (sparx5): - multicast forwarding offload - QoS queuing offload (tc-mqprio, tc-tbf, tc-ets) - Ethernet embedded switches: - Marvell (mv88e6xxx): - support RGMII cmode - NXP (felix): - standardized ethtool counters - Microchip (lan966x): - QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets) - traffic policing and mirroring - link aggregation / bonding offload - QUSGMII PHY mode support - Qualcomm 802.11ax WiFi (ath11k): - cold boot calibration support on WCN6750 - support to connect to a non-transmit MBSSID AP profile - enable remain-on-channel support on WCN6750 - Wake-on-WLAN support for WCN6750 - support to provide transmit power from firmware via nl80211 - support to get power save duration for each client - spectral scan support for 160 MHz - MediaTek WiFi (mt76): - WiFi-to-Ethernet bridging offload for MT7986 chips - RealTek WiFi (rtw89): - P2P support" * tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits) eth: pse: add missing static inlines once: rename _SLOW to _SLEEPABLE net: pse-pd: add regulator based PSE driver dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller ethtool: add interface to interact with Ethernet Power Equipment net: mdiobus: search for PSE nodes by parsing PHY nodes. net: mdiobus: fwnode_mdiobus_register_phy() rework error handling net: add framework to support Ethernet PSE and PDs devices dt-bindings: net: phy: add PoDL PSE property net: marvell: prestera: Propagate nh state from hw to kernel net: marvell: prestera: Add neighbour cache accounting net: marvell: prestera: add stub handler neighbour events net: marvell: prestera: Add heplers to interact with fib_notifier_info net: marvell: prestera: Add length macros for prestera_ip_addr net: marvell: prestera: add delayed wq and flush wq on deinit net: marvell: prestera: Add strict cleanup of fib arbiter net: marvell: prestera: Add cleanup of allocated fib_nodes net: marvell: prestera: Add router nexthops ABI eth: octeon: fix build after netif_napi_add() changes net/mlx5: E-Switch, Return EBUSY if can't get mode lock ...
2022-10-04ARM: 9246/1: dump: show page table level nameWang Kefeng1-1/+5
ARM could have 3 page table level if ARM_LPAE enabled, or only 2 page table level, let's show the page table level name when dump. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-10-04ARM: 9245/1: dump: show FDT regionWang Kefeng1-1/+1
Since commit 7a1be318f579 ("ARM: 9012/1: move device tree mapping out of linear region"), FDT is placed between the end of the vmalloc region and the start of the fixmap region, let's show it in dump. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-10-04ARM: 9242/1: kasan: Only map modules if CONFIG_KASAN_VMALLOC=nAlex Sverdlin1-2/+7
In case CONFIG_KASAN_VMALLOC=y kasan_populate_vmalloc() allocates the shadow pages dynamically. But even worse is that kasan_release_vmalloc() releases them, which is not compatible with create_mapping() of MODULES_VADDR..MODULES_END range: BUG: Bad page state in process kworker/9:1 pfn:2068b page:e5e06160 refcount:0 mapcount:0 mapping:00000000 index:0x0 flags: 0x1000(reserved) raw: 00001000 e5e06164 e5e06164 00000000 00000000 00000000 ffffffff 00000000 page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set bad because of flags: 0x1000(reserved) Modules linked in: ip_tables CPU: 9 PID: 154 Comm: kworker/9:1 Not tainted 5.4.188-... #1 Hardware name: LSI Axxia AXM55XX Workqueue: events do_free_init unwind_backtrace show_stack dump_stack bad_page free_pcp_prepare free_unref_page kasan_depopulate_vmalloc_pte __apply_to_page_range apply_to_existing_page_range kasan_release_vmalloc __purge_vmap_area_lazy _vm_unmap_aliases.part.0 __vunmap do_free_init process_one_work worker_thread kthread Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-10-04ARM: 9240/1: dma-mapping: Pass (void *) to virt_to_page()Linus Walleij1-1/+1
Pointers to virtual memory functions are (void *) but the __dma_update_pte() function is passing an unsigned long. Fix this up by explicit cast. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-10-04ARM: 9234/1: stacktrace: Avoid duplicate saving of exception PC valueLi Huafei3-14/+37
Because an exception stack frame is not created in the exception entry, save_trace() does special handling for the exception PC, but this is only needed when CONFIG_FRAME_POINTER_UNWIND=y. When CONFIG_ARM_UNWIND=y, unwind annotations have been added to the exception entry and save_trace() will repeatedly save the exception PC: [0x7f000090] hrtimer_hander+0x8/0x10 [hrtimer] [0x8019ec50] __hrtimer_run_queues+0x18c/0x394 [0x8019f760] hrtimer_run_queues+0xbc/0xd0 [0x8019def0] update_process_times+0x34/0x80 [0x801ad2a4] tick_periodic+0x48/0xd0 [0x801ad3dc] tick_handle_periodic+0x1c/0x7c [0x8010f2e0] twd_handler+0x30/0x40 [0x80177620] handle_percpu_devid_irq+0xa0/0x23c [0x801718d0] generic_handle_domain_irq+0x24/0x34 [0x80502d28] gic_handle_irq+0x74/0x88 [0x8085817c] generic_handle_arch_irq+0x58/0x78 [0x80100ba8] __irq_svc+0x88/0xc8 [0x80108114] arch_cpu_idle+0x38/0x3c [0x80108114] arch_cpu_idle+0x38/0x3c <==== duplicate saved exception PC [0x80861bf8] default_idle_call+0x38/0x130 [0x8015d5cc] do_idle+0x150/0x214 [0x8015d978] cpu_startup_entry+0x18/0x1c [0x808589c0] rest_init+0xd8/0xdc [0x80c00a44] arch_post_acpi_subsys_init+0x0/0x8 We can move the special handling of the exception PC in save_trace() to the unwind_frame() of the frame pointer unwinder. Signed-off-by: Li Huafei <lihuafei1@huawei.com> Reviewed-by: Linus Waleij <linus.walleij@linaro.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-10-04ARM: 9233/1: stacktrace: Skip frame pointer boundary check for call_with_stack()Li Huafei2-7/+35
When using the frame pointer unwinder, it was found that the stack trace output of stack_trace_save() is incomplete if the stack contains call_with_stack(): [0x7f00002c] dump_stack_task+0x2c/0x90 [hrtimer] [0x7f0000a0] hrtimer_hander+0x10/0x18 [hrtimer] [0x801a67f0] __hrtimer_run_queues+0x1b0/0x3b4 [0x801a7350] hrtimer_run_queues+0xc4/0xd8 [0x801a597c] update_process_times+0x3c/0x88 [0x801b5a98] tick_periodic+0x50/0xd8 [0x801b5bf4] tick_handle_periodic+0x24/0x84 [0x8010ffc4] twd_handler+0x38/0x48 [0x8017d220] handle_percpu_devid_irq+0xa8/0x244 [0x80176e9c] generic_handle_domain_irq+0x2c/0x3c [0x8052e3a8] gic_handle_irq+0x7c/0x90 [0x808ab15c] generic_handle_arch_irq+0x60/0x80 [0x8051191c] call_with_stack+0x1c/0x20 For the frame pointer unwinder, unwind_frame() checks stackframe::fp by stackframe::sp. Since call_with_stack() switches the SP from one stack to another, stackframe::fp and stackframe: :sp will point to different stacks, so we can no longer check stackframe::fp by stackframe::sp. Skip checking stackframe::fp at this point to avoid this problem. Signed-off-by: Li Huafei <lihuafei1@huawei.com> Reviewed-by: Linus Waleij <linus.walleij@linaro.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-10-03Merge tag 'hardening-v6.1-rc1' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull kernel hardening updates from Kees Cook: "Most of the collected changes here are fixes across the tree for various hardening features (details noted below). The most notable new feature here is the addition of the memcpy() overflow warning (under CONFIG_FORTIFY_SOURCE), which is the next step on the path to killing the common class of "trivially detectable" buffer overflow conditions (i.e. on arrays with sizes known at compile time) that have resulted in many exploitable vulnerabilities over the years (e.g. BleedingTooth). This feature is expected to still have some undiscovered false positives. It's been in -next for a full development cycle and all the reported false positives have been fixed in their respective trees. All the known-bad code patterns we could find with Coccinelle are also either fixed in their respective trees or in flight. The commit message in commit 54d9469bc515 ("fortify: Add run-time WARN for cross-field memcpy()") for the feature has extensive details, but I'll repeat here that this is a warning _only_, and is not intended to actually block overflows (yet). The many patches fixing array sizes and struct members have been landing for several years now, and we're finally able to turn this on to find any remaining stragglers. Summary: Various fixes across several hardening areas: - loadpin: Fix verity target enforcement (Matthias Kaehlcke). - zero-call-used-regs: Add missing clobbers in paravirt (Bill Wendling). - CFI: clean up sparc function pointer type mismatches (Bart Van Assche). - Clang: Adjust compiler flag detection for various Clang changes (Sami Tolvanen, Kees Cook). - fortify: Fix warnings in arch-specific code in sh, ARM, and xen. Improvements to existing features: - testing: improve overflow KUnit test, introduce fortify KUnit test, add more coverage to LKDTM tests (Bart Van Assche, Kees Cook). - overflow: Relax overflow type checking for wider utility. New features: - string: Introduce strtomem() and strtomem_pad() to fill a gap in strncpy() replacement needs. - um: Enable FORTIFY_SOURCE support. - fortify: Enable run-time struct member memcpy() overflow warning" * tag 'hardening-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (27 commits) Makefile.extrawarn: Move -Wcast-function-type-strict to W=1 hardening: Remove Clang's enable flag for -ftrivial-auto-var-init=zero sparc: Unbreak the build x86/paravirt: add extra clobbers with ZERO_CALL_USED_REGS enabled x86/paravirt: clean up typos and grammaros fortify: Convert to struct vs member helpers fortify: Explicitly check bounds are compile-time constants x86/entry: Work around Clang __bdos() bug ARM: decompressor: Include .data.rel.ro.local fortify: Adjust KUnit test for modular build sh: machvec: Use char[] for section boundaries kunit/memcpy: Avoid pathological compile-time string size lib: Improve the is_signed_type() kunit test LoadPin: Require file with verity root digests to have a header dm: verity-loadpin: Only trust verity targets with enforcement LoadPin: Fix Kconfig doc about format of file with verity digests um: Enable FORTIFY_SOURCE lkdtm: Update tests for memcpy() run-time warnings fortify: Add run-time WARN for cross-field memcpy() fortify: Use SIZE_MAX instead of (size_t)-1 ...
2022-10-03Merge tag 'execve-v6.1-rc1' of ↵Linus Torvalds12-12/+0
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull execve updates from Kees Cook: "This removes a.out support globally; it has been disabled for a while now. - Remove a.out implementation globally (Eric W. Biederman) - Remove unused linux_binprm::taso member (Lukas Bulwahn)" * tag 'execve-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: binfmt: remove taso from linux_binprm struct a.out: Remove the a.out implementation
2022-10-03Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds3-1/+7
Pull ARM fixes from Russell King: "Three fixes for ARM: - unbreak the RiscPC build - fix wrong pg_level in page table dumper - make MT_MEMORY_RO really read-only with LPAE" * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9247/1: mm: set readonly for MT_MEMORY_RO with ARM_LPAE ARM: 9244/1: dump: Fix wrong pg_level in walk_pmd() ARM: 9243/1: riscpc: Unbreak the build
2022-10-02kbuild: remove head-y syntaxMasahiro Yamada1-3/+0
Kbuild puts the objects listed in head-y at the head of vmlinux. Conventionally, we do this for head*.S, which contains the kernel entry point. A counter approach is to control the section order by the linker script. Actually, the code marked as __HEAD goes into the ".head.text" section, which is placed before the normal ".text" section. I do not know if both of them are needed. From the build system perspective, head-y is not mandatory. If you can achieve the proper code placement by the linker script only, it would be cleaner. I collected the current head-y objects into head-object-list.txt. It is a whitelist. My hope is it will be reduced in the long run. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2022-10-02kbuild: use obj-y instead extra-y for objects placed at the headMasahiro Yamada1-2/+2
The objects placed at the head of vmlinux need special treatments: - arch/$(SRCARCH)/Makefile adds them to head-y in order to place them before other archives in the linker command line. - arch/$(SRCARCH)/kernel/Makefile adds them to extra-y instead of obj-y to avoid them going into built-in.a. This commit gets rid of the latter. Create vmlinux.a to collect all the objects that are unconditionally linked to vmlinux. The objects listed in head-y are moved to the head of vmlinux.a by using 'ar m'. With this, arch/$(SRCARCH)/kernel/Makefile can consistently use obj-y for builtin objects. There is no *.o that is directly linked to vmlinux. Drop unneeded code in scripts/clang-tools/gen_compile_commands.py. $(AR) mPi needs 'T' to workaround the llvm-ar bug. The fix was suggested by Nathan Chancellor [1]. [1]: https://lore.kernel.org/llvm/YyjjT5gQ2hGMH0ni@dev-arch.thelio-3990X/ Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2022-09-30ARM: dts: s5pv210: correct double "pins" in pinmux nodeKrzysztof Kozlowski2-3/+3
Drop second "pins" suffix from pin configuration/mux nodes. Link: https://lore.kernel.org/r/20220926125824.477920-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-09-30ARM: dts: exynos: fix polarity of VBUS GPIO of OrigenDmitry Torokhov1-1/+1
EHCI Oxynos (drivers/usb/host/ehci-exynos.c) drives VBUS GPIO high when trying to power up the bus, therefore the GPIO in DTS must be marked as "active high". This will be important when EHCI driver is converted to gpiod API that respects declared polarities. Fixes: 4e8991def565 ("ARM: dts: exynos: Enable AX88760 USB hub on Origen board") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20220927220504.3744878-1-dmitry.torokhov@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-09-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski8-13/+18
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28Merge branch 'uniphier/dt' into arm/dtArnd Bergmann13-136/+345
Updates from Kunihiko Hayashi via email: "Update devicetree sources for UniPhier armv8 SoCs to remove dtschema warnings, add support existing features that haven't yet been described, and replace constants with macros." * uniphier/dt: arm64: dts: uniphier: Add L2 cache node arm64: dts: uniphier: Remove compatible "snps,dw-pcie" from pcie node arm64: dts: uniphier: Fix opp-table node name for LD20 arm64: dts: uniphier: Add USB-device support for PXs3 reference board arm64: dts: uniphier: Add ahci controller nodes for PXs3 arm64: dts: uniphier: Use GIC interrupt definitions arm64: dts: uniphier: Rename gpio-hog nodes arm64: dts: uniphier: Rename usb-glue node for USB3 to usb-controller arm64: dts: uniphier: Rename usb-phy node for USB2 to usb-controller arm64: dts: uniphier: Rename pvtctl node to thermal-sensor ARM: dts: uniphier: Remove compatible "snps,dw-pcie-ep" from pcie-ep node ARM: dts: uniphier: Move interrupt-parent property to each child node in uniphier-support-card ARM: dts: uniphier: Add ahci controller nodes for PXs2 ARM: dts: uniphier: Add ahci controller nodes for Pro4 ARM: dts: uniphier: Use GIC interrupt definitions ARM: dts: uniphier: Rename gpio-hog node ARM: dts: uniphier: Rename usb-glue node for USB3 to usb-controller ARM: dts: uniphier: Rename usb-phy node for USB2 to usb-controller ARM: dts: uniphier: Rename pvtctl node to thermal-sensor
2022-09-28arm64: dts: uniphier: Add USB-device support for PXs3 reference boardKunihiko Hayashi1-0/+10
PXs3 reference board can change each USB port 0 and 1 to device mode with jumpers. Prepare devicetree sources for USB port 0 and 1. This specifies dr_mode, pinctrl, and some quirks and removes nodes for unused phys and vbus-supply properties. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/20220913042321.4817-8-hayashi.kunihiko@socionext.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-09-28ARM: dts: uniphier: Remove compatible "snps,dw-pcie-ep" from pcie-ep nodeKunihiko Hayashi1-2/+1
The generic platform driver pcie-designware-plat.c doesn't work for UniPhier PCIe endpoint controller, because the controller has some necessary initialization sequence for the controller-specific logic. Currently the controller doesn't use "snps,dw-pcie-ep" compatible, so this is no longer needed. Remove the compatible string from the pcie-ep node. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/20220913042249.4708-10-hayashi.kunihiko@socionext.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-09-28ARM: dts: uniphier: Move interrupt-parent property to each child node in ↵Kunihiko Hayashi1-1/+2
uniphier-support-card The dtschema warning: uniphier-ld11-ref.dt.yaml: system-bus@58c00000: 'interrupt-parent' does not match any of the regexes: '^.*@[1-5],[1-9a-f][0-9a-f]+$', 'pinctrl-[0-9]+' Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/20220913042249.4708-9-hayashi.kunihiko@socionext.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-09-28ARM: dts: uniphier: Add ahci controller nodes for PXs2Kunihiko Hayashi2-0/+44
Add ahci core controller and glue layer nodes including reset-controller and sata-phy. This supports for PXs2 and the boards without PXs2 vodka board that doesn't implement any SATA connectors. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/20220913042249.4708-8-hayashi.kunihiko@socionext.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-09-28ARM: dts: uniphier: Add ahci controller nodes for Pro4Kunihiko Hayashi3-0/+113
Add ahci controller, glue layer, and clock nodes for Pro4 SoC. The glue layer includes reset and phy, and the clock node is used for handling ahci clocks on SoC-glue. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/20220913042249.4708-7-hayashi.kunihiko@socionext.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-13 14:13:02 +0000