summaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2010-10-13ARM: shmobile: use device name for timer clocksMagnus Damm6-6/+3
Move SH-Mobile ARM systems over from the legacy "clk" member of struct sh_timer_config to using the device name and clkdev for clock matching. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-13ARM: shmobile: make AP4EVB MMCIF resource string consistentMagnus Damm1-1/+1
Just use MMCIF as name to match the sh7372 data sheet. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-13ARM: shmobile: break out sh7372 platform devicesMagnus Damm1-0/+6
This patch introduces sh7372_late_devices which should include all regular processor specific platform devices. Early platform devices for console and timers should be put on the sh7372_early_devices list, all other devices should be on sh7372_late_devices. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-06arm/shmobile: remove duplicated includeNicolas Kaiser1-1/+0
Remove duplicated include. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-16ARM: mach-shmobile: modify wrong array size of div6_reparent_clksKuninori Morimoto1-1/+1
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14ARM: mach-shmobile: ap4evb: modify touchpanel judgment conditionKuninori Morimoto1-3/+35
Current touchpanel had below 2 issues - LCDD2 pin which is needed for WVGA was changed to IRQ28_123 pin on ts_get_pendown_state - GPIO pull up on ts_init was disabled by gpio_request on ts_get_pendown_state. This mean the return value from gpio_get_value is untrusted. This patch solve these issues Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14ARM: mach-shmobile: add two more video modes for HDMIGuennadi Liakhovetski1-6/+35
Add video modes for 480p and SXGA (1280x1024). Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14fbdev: sh_mobile_lcdcfb: Support multiple video modes in platform dataGuennadi Liakhovetski1-41/+57
This is a preparation for HDMI hotplug support. This patch just moves all platform defined video modes for the sh_mobile_lcdcfb driver to separate arrays and switches all users to use element 0 of that array, so, this patch doesn't introduce any functional changes and as such should not cause any regressions. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14ARM: mach-shmobile: sh7372: modify INTCS tableKuninori Morimoto1-0/+28
Add ignored device name by comment-out in INTCS. And MSIOF which has been forgotten is added Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14ARM: mach-shmobile: pfc-sh7372: modify wrong commentKuninori Morimoto1-4/+4
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14ARM: mach-shmobile: Use evt2irq() for sh7372 DMACMagnus Damm1-12/+12
Use evt2irq() for DMAC resources on sh7372. This makes the code easier to read and also allows adjusting the INTC base offset without breaking platform data. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14ARM: mach-shmobile: Extend AP4EVB LCD commentsMagnus Damm1-2/+6
Extend dip switch comments for QHD and WVGA LCD panels on AP4EVB. Similar to the Ecovec comments. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14ARM: mach-shmobile: ap4evb: modify tsc2007 platform settingsKuninori Morimoto1-48/+3
This patch modify x_plate_ohms to correct value for tsc2007, and removed un-necessary ts_get_pendown_state(). gpio_pull_up() was removed also. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-10Merge branch 'at91-fixes-for-linus' of git://github.com/at91linux/linux-2.6-at91Linus Torvalds4-19/+36
* 'at91-fixes-for-linus' of git://github.com/at91linux/linux-2.6-at91: AT91: at91sam9261ek: remove C99 comments but keep information AT91: at91sam9261ek board: remove warnings related to use of SPI or SD/MMC AT91: dm9000 initialization update AT91: SAM9G45 - add a separate clock entry for every single TC block AT91: clock: peripheral clocks can have other parent than mck AT91: change dma resource index
2010-09-10AT91: at91sam9261ek: remove C99 comments but keep informationNicolas Ferre1-4/+2
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-09-10AT91: at91sam9261ek board: remove warnings related to use of SPI or SD/MMCNicolas Ferre1-11/+19
The sd/mmc data structure is not used if SPI is selected. The configuration of PIO on the board prevent from using both interfaces at the same time (board dependent). Remove the warnings at compilation time adding a preprocessor condition. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-09-10AT91: dm9000 initialization updateNicolas Ferre1-1/+2
Add information in dm9000 mac/phy chip initialization: - irq resource details - platform data details Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-09-09ARM: Update mach-typesRussell King1-2/+96
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-09ARM: Partially revert "Auto calculate ZRELADDR and provide option for ↵Russell King4-95/+10
exceptions" Partially revert e69edc7, which introduced automatic zreladdr support. The change in the way the manual definition is defined seems to be error and conflict prone. Go back to the original way we were handling this for the time being, while keeping the automatic zreladdr facility. Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-09Merge branch 'origin'Russell King1-0/+1
2010-09-09AT91: SAM9G45 - add a separate clock entry for every single TC blockFabian Godehardt2-5/+14
Without this patch you will not be able to register the first block because of the second association call on at91_add_device_tc(). Signed-off-by: Fabian Godehardt <fg@emlix.com> [nicolas.ferre@atmel.com: change tcb1_clk to fake child clock of tcb0_clk] Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-09-09AT91: clock: peripheral clocks can have other parent than mckNicolas Ferre1-1/+2
While registering clock allow to set parent clock other than mck. It is useful for clocks than can be seen as child clock of a peripheral. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Andrew Victor <linux@maxim.org.za>
2010-09-08ARM: Ensure PTE modifications via dma_alloc_coherent are visibleRussell King1-0/+2
Dave Hylands reports: | We've observed a problem with dma_alloc_writecombine when the system | is under heavy load (heavy bus traffic). We've managed to reduce the | problem to the following snippet, which is run from a kthread in a | continuous loop: | | void *virtAddr; | dma_addr_t physAddr; | unsigned int numBytes = 256; | | for (;;) { | virtAddr = dma_alloc_writecombine(NULL, | numBytes, &physAddr, GFP_KERNEL); | if (virtAddr == NULL) { | printk(KERN_ERR "Running out of memory\n"); | break; | } | | /* access DMA memory allocated */ | tmp = virtAddr; | *tmp = 0x77; | | /* free DMA memory */ | dma_free_writecombine(NULL, | numBytes, virtAddr, physAddr); | | ...sleep here... | } | | By itself, the code will run forever with no issues. However, as we | increase our bus traffic (typically using DMA) then the *tmp = 0x77 | line will eventually cause a page fault. If we add a small delay (a | few microseconds) before the *tmp = 0x77, then we don't see a page | fault, even under heavy load. A dsb() is required after modifying the PTE entries to ensure that they will always be visible. Add this dsb(). Reported-by: Dave Hylands <dhylands@gmail.com> Tested-by: Dave Hylands <dhylands@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-08ARM: 6359/1: ep93xx: move clock initialization earlierMika Westerberg1-1/+1
Commit 7cfe24947 ("ARM: AMBA: Add pclk support to AMBA bus infrastructure") changed AMBA bus to handle the PCLK automatically. However, in EP93xx clock initialization is arch_initcall which is done later than AMBA device identification. This causes amba_get_enable_pclk() to fail resulting device where UARTs are not functional. So change ep93xx_clock_init() to be postcore_initcall. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-08Revert "[ARM] pxa: remove now unnecessary dma_needs_bounce()"Russell King2-8/+8
This reverts commit 4fa5518, which causes a compilation regression for IXP4xx platforms. Reported-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-07AT91: change dma resource indexNicolas Ferre1-1/+1
Reported-by: Dan Liang <dan.liang@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-09-02ARM: 6352/1: perf: fix event validationWill Deacon1-2/+2
The validate_event function in the ARM perf events backend has the following problems: 1.) Events that are disabled count towards the cost. 2.) Events associated with other PMUs [for example, software events or breakpoints] do not count towards the cost, but do fail validation, causing the group to fail. This patch changes validate_event so that it ignores events in the PERF_EVENT_STATE_OFF state or that are scheduled for other PMUs. Reported-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Jamie Iles <jamie.iles@picochip.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-02ARM: 6344/1: Mark CPU_32v6K as depended on CPU_V7Catalin Marinas1-1/+1
CPU_32v6K is selected by CPU_V7 but it only depends on CPU_V6. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-01[ARM] tegra: Add ZRELADDR default for ARCH_TEGRAErik Gilling1-0/+1
fixes the warning: .config:369:warning: symbol value '' invalid for ZRELADDR and the prompt for ZRELADDR on make Signed-off-by: Erik Gilling <konkers@android.com>
2010-09-01Merge branch 'imx-for-2.6.36' of git://git.pengutronix.de/git/imx/linux-2.6Russell King9-33/+68
2010-09-01Merge branch 'fix' of ↵Russell King4-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2010-09-01Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/genesis-2.6Russell King5-20/+220
2010-09-01ARM: 6343/1: wire up fanotify and prlimit64 syscalls on ARMMikael Pettersson2-0/+6
The 2.6.36-rc kernel added three new system calls: fanotify_init, fanotify_mark, and prlimit64. This patch wires them up on ARM. The only non-trivial issue here is the u64 argument to sys_fanotify_mark(), but it is the 3rd argument and thus passed in r2/r3 in both kernel and user space, so it causes no problems. Tested with a 2.6.36-rc2 EABI kernel on an ixp4xx machine. Tested-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-01ARM: 6330/1: perf: reword comments relating to perf_event_do_pendingWill Deacon2-5/+5
This is purely a cosmetic change to the ARM perf backend because the current comments about the relationship between NMIs, interrupt context and perf_event_do_pending are misleading. This patch updates the comments so that they reflect what the code actually does (which is in line with other architectures). Acked-by: Jamie Iles <jamie.iles@picochip.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-30ARM: pxa: Make id const in pwm_probe()Uwe Kleine-König1-1/+1
This fixes the compiler warning: arch/arm/plat-pxa/pwm.c: In function 'pwm_probe': arch/arm/plat-pxa/pwm.c:179: warning: initialization discards qualifiers from pointer target type Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-30ARM: pxa: fix CI_HSYNC and CI_VSYNC MFP defines for pxa300Axel Lin1-2/+2
According to PXA3xx Processor Family Developer Manuall Vol1. section "Pin Descriptions and Control", PXA30x and PXA31x Processor Alternate Function Table shows the Alt FN 0 for GPIO51 is CI_HSYNC and for GPIO52 is CI_VSYNC. This patch fixes the MFP defines and also corrects the order of MFD defines. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-30ARM: pxa: remove __init from cpufreq_driver->init()Eric Miao2-2/+2
This is causing section mismatches when linking, as cpufreq_driver->init() is not supposed to be in init section. Reported-by: Tomáš 'Sleep_Walker' Čech <sleep_walker@suse.cz> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-28Merge branch 's5p-fixes-for-linus' of ↵Linus Torvalds14-62/+135
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung * 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: S5PV310: Fix on Secondary CPU startup ARM: S5PV310: Bug fix on uclk1 and sclk_pwm ARM: S5PV310: Fix missed uart clocks ARM: S5PV310: Should be clk_sclk_apll not clk_mout_apll ARM: S5PV310: Fix on PLL setting for S5PV310 ARM: S5PV310: Add CMU block for S5PV310 Clock ARM: S5PV310: Fix on typo irqs.h of S5PV310 ARM: S5PV310: Fix on default ZRELADDR of ARCH_S5PV310 ARM: S5PV310: Fix on GPIO base addresses ARM: SAMSUNG: Fix on build warning regarding VMALLOC_END type ARM: S5P: VMALLOC_END should be unsigned long
2010-08-28Merge branch 'for-linus' of git://android.git.kernel.org/kernel/tegraLinus Torvalds2-3/+1
* 'for-linus' of git://android.git.kernel.org/kernel/tegra: arm: tegra: VMALLOC_END should be unsigned long arm: tegra: fix compilation of board-harmony.c
2010-08-28Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds8-20/+20
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: OMAP3: PM: ensure IO wakeups are properly disabled omap: Fix omap_4430sdp_defconfig for make oldconfig omap: Use CONFIG_SMP for test_for_ipi and test_for_ltirq omap: Fix sev instruction usage for multi-omap OMAP3: Fix a cpu type check problem omap3: id: fix 3630 rev detection
2010-08-28Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: pxa27x_keypad - remove input_free_device() in pxa27x_keypad_remove() Input: mousedev - fix regression of inverting axes Input: uinput - add devname alias to allow module on-demand load Input: hil_kbd - fix compile error USB: drop tty argument from usb_serial_handle_sysrq_char() Input: sysrq - drop tty argument form handle_sysrq() Input: sysrq - drop tty argument from sysrq ops handlers
2010-08-27ARM: S5PV310: Fix on Secondary CPU startupChanghwan Youn4-2/+10
Following occurs on boot message without this patch. CPU1: processor failed to boot Brought up 1 CPUs SMP: Total of 1 processors activated... This patch adds SYSRAM mapping for fixing Secondary CPU startup. CPU1: Booted secondary processor Brought up 2 CPUs SMP: Total of 2 processors activated... Signed-off-by: Changhwan Youn <chaos.youn@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27ARM: S5PV310: Bug fix on uclk1 and sclk_pwmJongpill Lee2-8/+15
This patch fixes on enable and ctrlbit of uclk1 and sclk_pwm. Signed-off-by: Jongpill Lee <boyko.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27ARM: S5PV310: Fix missed uart clocksJongpill Lee1-7/+37
This patch adds missed uart clocks for S5PV310/S5PC210. Signed-off-by: Jongpill Lee <boyko.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27ARM: S5PV310: Should be clk_sclk_apll not clk_mout_apllJongpill Lee1-3/+12
This patch adds clk_sclk_apll so that fixes on clk_mout_apll. Signed-off-by: Jongpill Lee <boyko.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27ARM: S5PV310: Fix on PLL setting for S5PV310Jongpill Lee1-2/+2
This patch fixes on PLL setting for S5PV310/S5PC210. Signed-off-by: Jongpill Lee <boyko.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27ARM: S5PV310: Add CMU block for S5PV310 ClockKukjin Kim4-31/+38
This patch adds CMU block for S5PV310/S5PC210 clock. (CMU: Clock Management Unit) Of course, changed current clock addresses for it together. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27ARM: S5PV310: Fix on typo irqs.h of S5PV310Kukjin Kim1-4/+7
This patch fixes typo 'IRQ_WTD' in the irqs.h of S5PV310. And minor update comments. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27ARM: S5PV310: Fix on default ZRELADDR of ARCH_S5PV310Kukjin Kim1-1/+2
This patch adds default zreladdr of ARCH_S5PV310. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27ARM: S5PV310: Fix on GPIO base addressesKyungmin Park1-2/+10
The S5PV310/S5PC210 has following three GPIO base addresses. Part1 Base Address=0x11400000 Part2 Base Address=0x11000000 Part3 Base Address=0x03860000 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [kgene.kim@samsung.com: minor edit of title] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-09 12:36:37 +0000