summaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2012-08-31ARM: Kirkwood: Fix 'SZ_1M' undeclared here for db88f6281-bp-setup.cAndrew Lunn1-0/+1
Linux-next has failed to compile for kirkwood since 23 August with: arch/arm/mach-kirkwood/db88f6281-bp-setup.c:29: error: 'SZ_1M' undeclared here (not in a function) arch/arm/mach-kirkwood/db88f6281-bp-setup.c:33: error: 'SZ_4M' undeclared here (not in a function) Add missing <linux/sizes.h> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-08-31ARM: shmobile: mackerel: fixup usb module orderKuninori Morimoto1-1/+2
renesas_usbhs driver can play role as both Host and Gadget. In case of Gadget, it requires not only renesas_usbhs but also usb gadget module (like g_ether). So, renesas_usbhs driver calls usb_add_gadget_udc() on probe time. Because of this behavior, Host port plays also Gadget role if kernel has both Host/Gadget support. In mackerel case, from 0ada2da51800a4914887a9bcf22d563be80e50be (ARM: mach-shmobile: mackerel: use renesas_usbhs instead of r8a66597_hcd) usb0 plays Gadget role, and usb1 plays Host role, and current mackerel board probes as usb1 -> usb0. Thus, 1st installed usb gadget module (like g_ether) will be assigned to usb1 (= usb Host port), and 2nd module to usb0 (= usb Gadget port). It is very confusable for user. This patch fixup usb modes probing order as usb0 -> usb1. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-08-31ARM: shmobile: armadillo800eva: fixup: sound card detection orderKuninori Morimoto1-1/+1
Since armadillo800eva has 2 sound cards, and had reversed deferred probe order issue, it was purposely registered in reverse order. But it was solved by 1d29cfa57471a5e4b8a7c2a7433eeba170d3ad92 (driver core: fixup reversed deferred probe order) armadillo800eva board is expecting that FSI-WM8978 is the 1st, and FSI-HDMI is the 2nd sound card. This patch fixes it up Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-08-30ARM: OMAP: Config fix for omap3-touchbook boardRadek Pilar2-2/+3
Fix inconsistency between mach-types and CONFIG_ name that prevents touchbook board from booting. Signed-off-by: Radek Pilar <mrkva@mrkva.eu> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-08-30ARM: OMAP: sram: skip the first 16K on OMAP3 HSAaro Koskinen1-3/+6
In some OMAP3 HS devices (at least Nokia N9 and N950), the public SRAM seems to conflict with secure portition of SRAM. When booting the 3.6-rc3 kernel (and also earlier) on these devices, the kernel gets tainted with tons of the following warnings: [ 6.894348] In-band Error seen by MPU at address 0 [...] [ 6.894378] WARNING: at arch/arm/mach-omap2/omap_l3_smx.c:162 Fix this by skipping the first 16K of the public SRAM. (Note that the mapping could not be changed, as it resulted in secure monitor call failure in save_secure_sram().) This will leave 12K SRAM available that should be still sufficient. The patch has been boot tested with vanilla 3.6-rc3 on N900, N950 and N9. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-08-30ARM: OMAP: sram: fix OMAP4 errata handlingAaro Koskinen1-0/+2
OMAP4-specific code should be executed only if we are running on OMAP4. Otherwise it may break multi-OMAP kernels. Found by reading the code. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-08-30ARM: OMAP: timer: obey the !CONFIG_OMAP_32K_TIMERIgor Grinberg1-0/+7
Currently, omap2_sync32k_clocksource_init() function initializes the 32K timer as the system clock source regardless of the CONFIG_OMAP_32K_TIMER setting. Fix this by providing a default implementation for !CONFIG_OMAP_32K_TIMER case. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Reviewed-by: Paul Walmsley <paul@pwsan.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-08-30ARM: shmobile: marzen: fixup smsc911x id for regulatorKuninori Morimoto1-1/+1
dummy_supplies for smsc911x are registered as "smsc911x". smsc911x driver needs id = -1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-08-28ARM: dma-mapping: IOMMU allocates pages from atomic_pool with GFP_ATOMICHiroshi Doyu1-0/+36
Make use of the same atomic pool as DMA does, and skip a kernel page mapping which can involve sleep'able operations at allocating a kernel page table. Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-08-28ARM: dma-mapping: Introduce __atomic_get_pages() for __iommu_get_pages()Hiroshi Doyu1-0/+12
Support atomic allocation in __iommu_get_pages(). Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> [moved __atomic_get_pages() under #ifdef CONFIG_ARM_DMA_USE_IOMMU to avoid unused fuction warning for no-IOMMU case] Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-08-28ARM: dma-mapping: Refactor out to introduce __in_atomic_poolHiroshi Doyu1-6/+20
Check the given range("start", "size") is included in "atomic_pool" or not. Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-08-28ARM: dma-mapping: atomic_pool with struct page **pagesHiroshi Doyu1-3/+14
struct page **pages is necessary to align with non atomic path in __iommu_get_pages(). atomic_pool() has the intialized **pages instead of just *page. Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-08-28ARM: Kirkwood: increase atomic coherent pool sizeMarek Szyprowski1-0/+7
The default 256 KiB coherent pool may be too small for some of the Kirkwood devices, so increase it to make sure that devices will be able to allocate their buffers with GFP_ATOMIC flag. Suggested-by: Josh Coombs <josh.coombs@gmail.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Jason Cooper <jason@lakedaemon.net>
2012-08-28ARM: DMA-Mapping: print warning when atomic coherent allocation failsMarek Szyprowski1-0/+4
Print a loud warning when system runs out of memory from atomic DMA coherent pool to let users notice the potential problem. Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-08-28ARM: DMA-Mapping: add function for setting coherent pool size from platform codeMarek Szyprowski2-1/+25
Some platforms might require to increase atomic coherent pool to make sure that their device will be able to allocate all their buffers from atomic context. This function can be also used to decrease atomic coherent pool size if coherent allocations are not used for the given sub-platform. Suggested-by: Josh Coombs <josh.coombs@gmail.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-08-28ARM: relax conditions required for enabling Contiguous Memory AllocatorMarek Szyprowski1-1/+1
Contiguous Memory Allocator requires only paging and MMU enabled not particular CPU architectures, so there is no need for strict dependency on CPU type. This enables to use CMA on some older ARM v5 systems which also might need large contiguous blocks for the multimedia processing hw modules. Reported-by: Prabhakar Lad <prabhakar.lad@ti.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Prabhakar Lad <prabhakar.lad@ti.com>
2012-08-27Merge branch 'armadillo800eva' of ↵Olof Johansson1-5/+6
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes * 'armadillo800eva' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: mach-shmobile: armadillo800eva: Enable power button as wakeup source ARM: mach-shmobile: armadillo800eva: Fix GPIO buttons descriptions
2012-08-27Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixesOlof Johansson8-8/+42
Fixes for AT91 related to: - move to sparse IRQ: some drivers were forgotten - a DTS typo - the delay for removal of old at91_mci driver * tag 'at91-fixes' of git://github.com/at91linux/linux-at91: ARM: at91/feature-removal-schedule: delay at91_mci removal ARM: at91/dts: remove partial parameter in at91sam9g25ek.dts ARM: at91/clock: fix PLLA overclock warning ARM: at91: fix rtc-at91sam9 irq issue due to sparse irq support ARM: at91: fix system timer irq issue due to sparse irq support
2012-08-27Merge branch 'fixes' of ↵Olof Johansson1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas into fixes * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas: ARM: shmobile: sh73a0: fixup RELOC_BASE of intca_irq_pins_desc
2012-08-25Merge tag 'fixes-3.6-rc3' of ↵Linus Torvalds45-96/+161
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull arm-soc fixes from Arnd Bergmann: "Bug fixes for various ARM platforms. About half of these are for OMAP and submitted before but did not make it into v3.6-rc2." * tag 'fixes-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits) ARM: ux500: don't select LEDS_GPIO for snowball ARM: imx: build i.MX6 functions only when needed ARM: imx: select CPU_FREQ_TABLE when needed ARM: imx: fix ksz9021rn_phy_fixup ARM: imx: build pm-imx5 code only when PM is enabled ARM: omap: allow building omap44xx without SMP ARM: dts: imx51-babbage: fix esdhc cd/wp properties ARM: imx6: spin the cpu until hardware takes it down ARM: ux500: Ensure probing of Audio devices when Device Tree is enabled ARM: ux500: Fix merge error, no matching driver name for 'snd_soc_u8500' ARM i.MX6q: Add virtual 1/3.5 dividers in the LDB clock path ARM: Kirkwood: fix Makefile.boot ARM: Kirkwood: Fix iconnect leds ARM: Orion: Set eth packet size csum offload limit ARM: mv78xx0: fix win_cfg_base prototype ARM: OMAP: dmtimers: Fix locking issue in omap_dm_timer_request*() ARM: mmp: fix potential NULL dereference ARM: OMAP4: Register the OPP table only for 4430 device cpufreq: OMAP: Handle missing frequency table on SMP systems ARM: OMAP4: sleep: Save the complete used register stack frame ...
2012-08-25ARM: 7499/1: mm: Fix vmalloc overlap check for !HIGHMEMJonathan Austin1-2/+2
With !HIGHMEM, sanity_check_meminfo checks for banks that completely or partially overlap the vmalloc region. The test for partial overlap checks __va(bank->start + bank->size) > vmalloc_min. This is not appropriate if there is a non-linear translation between virtual and physical addresses, as bank->start + bank->size is actually in the bank following the one being interrogated. In most cases, even when using SPARSEMEM, this is not problematic as the subsequent bank will start at a higher va than the one in question. However if the physical to virtual address conversion is not monotonic increasing, the incorrect test could result in a bank not being truncated when it should be. This patch ensures we perform the va-pa conversion on memory from the bank we are interested in, not the following one. Reported-by: ??? (Steve) <zhanzhenbo@gmail.com> Signed-off-by: Jonathan Austin <jonathan.austin@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-08-25ARM: 7503/1: mm: only flush both pmd entries for classic MMUWill Deacon1-0/+4
LPAE does not use two pmd entries for a pte, so the additional tlb flushing is not required. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-08-25ARM: 7502/1: contextidr: avoid using bfi instruction during notifierWill Deacon1-3/+4
The bfi instruction is not available on ARMv6, so instead use an and/orr sequence in the contextidr_notifier. This gets rid of the assembler error: Assembler messages: Error: selected processor does not support ARM mode `bfi r3,r2,#0,#8' Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-08-25ARM: 7501/1: decompressor: reset ttbcr for VMSA ARMv7 coresWill Deacon1-0/+4
When enabling the MMU for ARMv7 CPUs, the decompressor does not touch the ttbcr register, assuming that it will be zeroed (N == 0, EAE == 0). Given that only EAE is defined as 0 for non-secure copies of the register (and a bootloader such as kexec may leave it set to 1 anyway), we should ensure that we reset the register ourselves before turning on the MMU. This patch zeroes TTBCR.EAE and TTBCR.N prior to enabling the MMU for ARMv7 cores in the decompressor, configuring us exclusively for 32-bit translation tables via TTBR0. Cc: <stable@vger.kernel.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Matthew Leach <matthew.leach@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-08-25ARM: 7497/1: hw_breakpoint: allow single-byte watchpoints on all addressesWill Deacon1-3/+4
Breakpoint validation currently fails for single-byte watchpoints on addresses ending in 11b. There is no reason to forbid such a watchpoint, so extend the validation code to allow it. Cc: Ulrich Weigand <Ulrich.Weigand@de.ibm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-08-25ARM: 7496/1: hw_breakpoint: don't rely on dfsr to show watchpoint access typeWill Deacon1-15/+40
From ARM debug architecture v7.1 onwards, a watchpoint exception causes the DFAR to be updated with the faulting data address. However, DFSR.WnR takes an UNKNOWN value and therefore cannot be used in general to determine the access type that triggered the watchpoint. This patch forbids watchpoints without an overflow handler from specifying a specific access type (load/store). Those with overflow handlers must be able to handle false positives potentially triggered by a watchpoint of a different access type on the same address. For SIGTRAP-based handlers (i.e. ptrace), this should have no impact. Cc: <stable@vger.kernel.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-08-25ARM: Fix ioremap() of address zeroRussell King2-2/+5
Murali Nalajala reports a regression that ioremapping address zero results in an oops dump: Unable to handle kernel paging request at virtual address fa200000 pgd = d4f80000 [fa200000] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 Tainted: G W (3.4.0-g3b5f728-00009-g638207a #13) PC is at msm_pm_config_rst_vector_before_pc+0x8/0x30 LR is at msm_pm_boot_config_before_pc+0x18/0x20 pc : [<c0078f84>] lr : [<c007903c>] psr: a0000093 sp : c0837ef0 ip : cfe00000 fp : 0000000d r10: da7efc17 r9 : 225c4278 r8 : 00000006 r7 : 0003c000 r6 : c085c824 r5 : 00000001 r4 : fa101000 r3 : fa200000 r2 : c095080c r1 : 002250fc r0 : 00000000 Flags: NzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 25180059 DAC: 00000015 [<c0078f84>] (msm_pm_config_rst_vector_before_pc+0x8/0x30) from [<c007903c>] (msm_pm_boot_config_before_pc+0x18/0x20) [<c007903c>] (msm_pm_boot_config_before_pc+0x18/0x20) from [<c007a55c>] (msm_pm_power_collapse+0x410/0xb04) [<c007a55c>] (msm_pm_power_collapse+0x410/0xb04) from [<c007b17c>] (arch_idle+0x294/0x3e0) [<c007b17c>] (arch_idle+0x294/0x3e0) from [<c000eed8>] (default_idle+0x18/0x2c) [<c000eed8>] (default_idle+0x18/0x2c) from [<c000f254>] (cpu_idle+0x90/0xe4) [<c000f254>] (cpu_idle+0x90/0xe4) from [<c057231c>] (rest_init+0x88/0xa0) [<c057231c>] (rest_init+0x88/0xa0) from [<c07ff890>] (start_kernel+0x3a8/0x40c) Code: c0704256 e12fff1e e59f2020 e5923000 (e5930000) This is caused by the 'reserved' entries which we insert (see 19b52abe3c5d7 - ARM: 7438/1: fill possible PMD empty section gaps) which get matched for physical address zero. Resolve this by marking these reserved entries with a different flag. Cc: <stable@vger.kernel.org> Tested-by: Murali Nalajala <mnalajal@codeaurora.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-08-25ARM: mach-shmobile: armadillo800eva: Enable power button as wakeup sourceLaurent Pinchart1-2/+3
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-08-25ARM: mach-shmobile: armadillo800eva: Fix GPIO buttons descriptionsLaurent Pinchart1-4/+4
The GPIO buttons are named SW3, SW4, SW5 and SW6 on the board silkscreen. Update the buttons descriptions accordingly. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-08-23Merge branch 'randconfig/mach' into fixesArnd Bergmann8-10/+12
Small platform specific bug fixes for problems found in randconfig builds. * randconfig/mach: ARM: ux500: don't select LEDS_GPIO for snowball ARM: imx: build i.MX6 functions only when needed ARM: imx: select CPU_FREQ_TABLE when needed ARM: imx: fix ksz9021rn_phy_fixup ARM: imx: build pm-imx5 code only when PM is enabled ARM: omap: allow building omap44xx without SMP Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-08-23ARM: ux500: don't select LEDS_GPIO for snowballArnd Bergmann2-1/+1
Using 'select' in Kconfig is hard, a platform cannot just enable a driver without also making sure that its subsystem is there. Also, there is no actual code dependency between the platform and the gpio leds driver. Without this patch, building without LEDS_CLASS esults in: drivers/built-in.o: In function `create_gpio_led.part.2': governor_userspace.c:(.devinit.text+0x5a58): undefined reference to `led_classdev_register' drivers/built-in.o: In function `gpio_led_remove': governor_userspace.c:(.devexit.text+0x6b8): undefined reference to `led_classdev_unregister' This reverts 8733f53c6 "ARM: ux500: Kconfig: Compile in leds-gpio support for Snowball" that introduced the regression and did not provide a helpful explanation. In order to leave the GPIO LED code still present in normal builds, this also enables the symbol in u8500_defconfig, in addition to the other LED drivers that are already selected there. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Lee Jones <lee.jones@linaro.org>
2012-08-23ARM: imx: build i.MX6 functions only when neededArnd Bergmann2-4/+3
The head-v7.S contains a call to the generic cpu_suspend function, which is only available when selected by the i.MX6 code. As pointed out by Shawn Guo, i.MX5 does not actually use any functions defined in head-v7.S. It is also needed only for the i.MX6 power management code and for the SMP code, so we can restrict building this file to situations in which at least one of those two is present. Finally, other platforms with a similar file call it headsmp.S, so we can rename it to the same for consistency. Without this patch, building imx5 standalone results in: arch/arm/mach-imx/built-in.o: In function `v7_cpu_resume': arch/arm/mach-imx/head-v7.S:104: undefined reference to `cpu_resume' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Eric Miao <eric.miao@linaro.org> Cc: stable@vger.kernel.org
2012-08-23ARM: imx: select CPU_FREQ_TABLE when neededArnd Bergmann1-0/+1
The i.MX cpufreq implementation uses the CPU_FREQ_TABLE helpers, so it needs to select that code to be built. This problem has apparently existed since the i.MX cpufreq code was first merged in v2.6.37. Building IMX without CPU_FREQ_TABLE results in: arch/arm/plat-mxc/built-in.o: In function `mxc_cpufreq_exit': arch/arm/plat-mxc/cpufreq.c:173: undefined reference to `cpufreq_frequency_table_put_attr' arch/arm/plat-mxc/built-in.o: In function `mxc_set_target': arch/arm/plat-mxc/cpufreq.c:84: undefined reference to `cpufreq_frequency_table_target' arch/arm/plat-mxc/built-in.o: In function `mxc_verify_speed': arch/arm/plat-mxc/cpufreq.c:65: undefined reference to `cpufreq_frequency_table_verify' arch/arm/plat-mxc/built-in.o: In function `mxc_cpufreq_init': arch/arm/plat-mxc/cpufreq.c:154: undefined reference to `cpufreq_frequency_table_cpuinfo' arch/arm/plat-mxc/cpufreq.c:162: undefined reference to `cpufreq_frequency_table_get_attr' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Yong Shen <yong.shen@linaro.org> Cc: stable@vger.kernel.org
2012-08-23ARM: imx: fix ksz9021rn_phy_fixupArnd Bergmann1-2/+2
The ksz9021rn_phy_fixup and mx6q_sabrelite functions try to set up an ethernet phy if they can. They do check whether phylib is enabled, but unfortunately the functions can only be called from platform code if phylib is builtin, not if it is a module Without this patch, building with a modular phylib results in: arch/arm/mach-imx/mach-imx6q.c: In function 'imx6q_sabrelite_init': arch/arm/mach-imx/mach-imx6q.c:120:5: error: 'ksz9021rn_phy_fixup' undeclared (first use in this function) arch/arm/mach-imx/mach-imx6q.c:120:5: note: each undeclared identifier is reported only once for each function it appears in The bug was originally reported by Artem Bityutskiy but only partially fixed in ef441806 "ARM: imx6q: register phy fixup only when CONFIG_PHYLIB is enabled". Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: Sascha Hauer <s.hauer@pengutronix.de>
2012-08-23ARM: imx: build pm-imx5 code only when PM is enabledArnd Bergmann1-1/+2
This moves the imx5 pm code out of the list of unconditionally compiled files for imx5, mirroring what we already do for imx6 and how it was done before the code was move from mach-mx5 to mach-imx in v3.3. Without this patch, building with CONFIG_PM disabled results in: arch/arm/mach-imx/pm-imx5.c:202:116: error: redefinition of 'imx51_pm_init' arch/arm/mach-imx/include/mach-imx/common.h:154:91: note: previous definition of 'imx51_pm_init' was here arch/arm/mach-imx/pm-imx5.c:209:116: error: redefinition of 'imx53_pm_init' arch/arm/mach-imx/include/mach-imx/common.h:155:91: note: previous definition of 'imx53_pm_init' was here Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: stable@vger.kernel.org
2012-08-23ARM: omap: allow building omap44xx without SMPArnd Bergmann2-2/+3
The new omap4 cpuidle implementation currently requires ARCH_NEEDS_CPU_IDLE_COUPLED, which only works on SMP. This patch makes it possible to build a non-SMP kernel for that platform. This is not normally desired for end-users but can be useful for testing. Without this patch, building rand-0y2jSKT results in: drivers/cpuidle/coupled.c: In function 'cpuidle_coupled_poke': drivers/cpuidle/coupled.c:317:3: error: implicit declaration of function '__smp_call_function_single' [-Werror=implicit-function-declaration] It's not clear if this patch is the best solution for the problem at hand. I have made sure that we can now build the kernel in all configurations, but that does not mean it will actually work on an OMAP44xx. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Tony Lindgren <tony@atomide.com>
2012-08-23Merge tag 'ux500-fixes-v3.6-rc2' of ↵Arnd Bergmann2-5/+9
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into fixes From Linus Walleij <linus.walleij@linaro.org>: Here are two audio fixes for the ux500 found by Lee Jones. * tag 'ux500-fixes-v3.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: ux500: Ensure probing of Audio devices when Device Tree is enabled ARM: ux500: Fix merge error, no matching driver name for 'snd_soc_u8500' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-08-23Merge branch 'v3.6-samsung-fixes-1' of ↵Arnd Bergmann7-4/+62
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes From Kukjin Kim <kgene.kim@samsung.com>: For HDMI, already HDMI support for EXYNOS in mainline kernel is broken because its configuration moved to platform data but regarding platform data didn't support yet. And others are for fix warnings. * 'v3.6-samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Set HDMI platform data in Origen board ARM: EXYNOS: Set HDMI platform data in SMDKV310 ARM: SAMSUNG: Add API to set platform data for s5p-tv driver ARM: SAMSUNG: Set HDMI platform data for Exynos4x12 SoCs ARM: Samsung: Make uart_save static in pm.c file ARM: S3C24XX: Fix s3c2410_dma_enqueue parameters ARM: S3C24XX: Add missing DMACH_DT_PROP Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-08-23Merge branch 'imx/fixes-for-3.6' of ↵Arnd Bergmann8-31/+40
git://git.linaro.org/people/shawnguo/linux-2.6 into fixes * 'imx/fixes-for-3.6' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: dts: imx51-babbage: fix esdhc cd/wp properties ARM: imx6: spin the cpu until hardware takes it down ARM i.MX6q: Add virtual 1/3.5 dividers in the LDB clock path Also updates to Linux 3.6-rc2 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-08-23ARM: dts: imx51-babbage: fix esdhc cd/wp propertiesShawn Guo1-2/+2
The binding doc and dts use properties "fsl,{cd,wp}-internal" while esdhc driver uses "fsl,{cd,wp}-controller". Fix binding doc and dts to get them match driver code. Reported-by: Chris Ball <cjb@laptop.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: <stable@vger.kernel.org> Acked-by: Chris Ball <cjb@laptop.org>
2012-08-23ARM: imx6: spin the cpu until hardware takes it downShawn Guo1-20/+3
Though commit 602bf40 (ARM: imx6: exit coherency when shutting down a cpu) improves the stability of imx6q cpu hotplug a lot, there are still hangs seen with a more stressful hotplug testing. It's expected that once imx_enable_cpu(cpu, false) is called, the cpu will be taken down by hardware immediately, and the code after that will not get any chance to execute. However, this is not always the case from the testing. The cpu could possibly be alive for a few cycles before hardware actually takes it down. So rather than letting cpu execute some code that could cause a hang in these cycles, let's make the cpu spin there and wait for hardware to take it down. Cc: <stable@vger.kernel.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-23ARM: at91/dts: remove partial parameter in at91sam9g25ek.dtsBo Shen1-1/+1
Remove the malformed "mem=" bootargs parameter in at91sam9g25ek.dts Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-08-23ARM: at91/clock: fix PLLA overclock warningNicolas Ferre1-0/+12
Fix PLLA overclock warning in relation with datasheet numbers. Add new > 240 MHz and > 210 MHz SoC categories. Reported-by: Jiri Prchal <jiri.prchal@aksignal.cz> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-08-23ARM: at91: fix rtc-at91sam9 irq issue due to sparse irq supportLudovic Desroches5-6/+28
AT91_ID_SYS as virq is incorrect because of spare irq support which introduces NR_IRQS_LEGACY offset. It modifies rtc-at91sam9 driver in order to get irq from resources. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-08-23ARM: at91: fix system timer irq issue due to sparse irq supportLudovic Desroches1-1/+1
AT91_ID_SYS as virq is incorrect because of spare irq support which introduces NR_IRQS_LEGACY offset. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Tested-by: Joachim Eastwood <joachim.eastwood@jotron.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-08-22ARM: shmobile: sh73a0: fixup RELOC_BASE of intca_irq_pins_descKuninori Morimoto1-2/+2
sh73a0 :: intca_irq_pins_desc irq table had conflict from irq 552 to irq 557 before. But the second controller was simply trampling the first one by way of the -EEXIST case from irq_alloc_desc_at(). But now, we have irqdomain support from 1d6a21b0a672fb29b01ccf397d478e0541e17716 (sh: intc: initial irqdomain support) The irqdomain code has simply tightened down the sanity checks and error path. So, sh73a0 CPU board got some WARNING when booting now. This patch fixup RELOC_BASE to solve this issue. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-08-18Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds12-34/+869
Pull ARM fixes from Russell King: "The largest thing in this set of changes is bringing back some of the ARMv3 code to fix a compile problem noticed on RiscPC, which we still support, even though we only support ARMv4 there. (The reason is that the system bus doesn't support ARMv4 half-word accesses, so we need the ARMv3 library code for this platform.) The rest are all quite minor fixes." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7490/1: Drop duplicate select for GENERIC_IRQ_PROBE ARM: Bring back ARMv3 IO and user access code ARM: 7489/1: errata: fix workaround for erratum #720789 on UP systems ARM: 7488/1: mm: use 5 bits for swapfile type encoding ARM: 7487/1: mm: avoid setting nG bit for user mappings that aren't present ARM: 7486/1: sched_clock: update epoch_cyc on resume ARM: 7484/1: Don't enable GENERIC_LOCKBREAK with ticket spinlocks ARM: 7483/1: vfp: only advertise VFPv4 in hwcaps if CONFIG_VFPv3 is enabled ARM: 7482/1: topology: fix section mismatch warning for init_cpu_topology
2012-08-17ARM: ux500: Ensure probing of Audio devices when Device Tree is enabledLee Jones1-0/+4
Previous attempts to add platform probing of the Audio related devices only call from non-DT initialisation functions. This patch extends that functionality to the Device Tree related ones too. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-17ARM: ux500: Fix merge error, no matching driver name for 'snd_soc_u8500'Lee Jones1-5/+5
The platform attempts to register platform device 'snd_soc_u8500' which doesn't actually exist. Here we change the reference to the correct one 'snd_soc_mop500'. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-17ARM i.MX6q: Add virtual 1/3.5 dividers in the LDB clock pathPhilipp Zabel1-3/+5
The ldb_di[01]_podf is implemented as a clk-divider that divides by 1 or 2. In reality, the ldb_di[01]_ipu_div dividers divide by either 3.5 or 7. Adding a fixed factor of 1/3.5 fixes their children's clock rates. This should probably be converted to rate table based dividers, once available. Cc: <stable@vger.kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>