summaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2019-02-19ARM: davinci: cp-intc: add the new config structures for da8xx SoCsBartosz Golaszewski2-0/+20
Add the new-style config structures for da8xx SoCs. They will be used once we make the cp-intc driver stop using davinci_soc_info. Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-02-19ARM: davinci: cp-intc: add a wrapper around cp_intc_init()Bartosz Golaszewski7-4/+16
We're going to extend the cp_intc_init() function with a config structure so we can drop the intc-related fields from davinci_soc_info. Once we do it, we won't be able to use this routine directly as the init_irq callback. Wrap the calls in additional helpers that don't take parameters and can be assigned to init_irq. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-02-19ARM: davinci: cp-intc: remove cp_intc.hBartosz Golaszewski7-63/+19
There's no need to have a local header for cp-intc. Move the only declaration for a public function to common.h. Move all register offsets into the driver source file and drop all unused defines. Make cp_intc_of_init() static. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-02-19irqchip: davinci-aintc: move the driver to drivers/irqchipBartosz Golaszewski3-171/+4
The aintc driver has now been cleaned up. Move it to drivers/irqchip where it belongs. There's no device-tree support for any dm* board so there's no IRQCHIP_OF_DECLARE() - there's only the exported init function called from machine code. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-02-19ARM: davinci: aintc: remove unnecessary includesBartosz Golaszewski1-4/+0
These includes are no longer required. Remove them. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-02-19ARM: davinci: aintc: remove the timer-specific irq_set_handler()Bartosz Golaszewski1-3/+0
I've been unable to figure out exactly why, but the IRQ_TINT1_TINT34 interrupt is being handled as level irq and it's configured in the irq chip driver instead of set by the irq_set_type() callback. Since this is probably some legacy hack for out-of-tree code - remove it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-02-19ARM: davinci: aintc: request memory region before remapping itBartosz Golaszewski1-0/+9
Add a missing call to request_mem_region() before calling ioremap() to make sure the region is not being used by anyone else. Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-02-19ARM: davinci: aintc: unify error handlingBartosz Golaszewski1-4/+14
Instead of dumping stack traces, just print a specific error message in aintc driver. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-02-19ARM: davinci: aintc: use the new config structureBartosz Golaszewski6-25/+24
Modify the aintc driver to take all its configuration from the new config structure. Stop referencing davinci_soc_info in any way. Move the declaration for davinci_aintc_init() to irq-davinci-aintc.h and make it take the new config structure as parameter. Convert all users to the new version. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-02-19ARM: davinci: aintc: use the new irqchip config structure in dm* SoCsBartosz Golaszewski4-0/+44
Add the new-style config structures for dm* SoCs. They will be used once we make the aintc driver stop using davinci_soc_info. Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-02-19ARM: davinci: aintc: use writel_relaxed()Bartosz Golaszewski1-1/+1
Raplace all calls to __raw_writel() with writel_relaxed(). It's safe to do as there's no endianness conversion being done in the code. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-02-19ARM: davinci: aintc: drop the 00 prefix from register offsetsBartosz Golaszewski1-11/+11
Since no offset goes past 0xff - let's drop the 00 prefix for better readability. While we're at it: convert all hex numbers to lower-case. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-02-19ARM: davinci: aintc: use a common prefix for symbols in the driverBartosz Golaszewski6-57/+60
In preparation for moving the driver to drivers/irqchip do some cleanup: use a common prefix for all symbols. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-02-19ARM: davinci: aintc: wrap davinci_irq_init() with a helperBartosz Golaszewski12-8/+32
We're going to extend the davinci_irq_init() function with a config structure so we can drop the intc-related fields from davinci_soc_info. Once we do it, we won't be able to use this routine directly as the init_irq callback. Wrap the calls in additional helpers that don't take parameters and can be assigned to init_irq. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-02-19ARM: davinci: aintc: drop GPL license boilerplateBartosz Golaszewski1-20/+6
Replace the GPLv2 or later license boilerplate with an SPDX identifier. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-02-19ARM: davinci: make irqs.h a local headerBartosz Golaszewski16-26/+30
The existence of irqs.h in mach-davinci/include/mach only makes sense without SPARSE_IRQ as it's then expected to define NR_IRQS and is included from asm/irq.h. As we now support SPARSE_IRQ, this header can be moved to mach-davinci and used as the source of HW interrupt numbers. While updating the includes in various files - also rearrange the headers by directory (linux/asm/mach). Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-02-19ARM: davinci: select SPARSE_IRQBartosz Golaszewski8-2/+9
Everything is in place now for SPARSE_IRQ. Select it and set DAVINCI_INTC_START to NR_IRQS. We now need to include mach/irqs.h in a couple places as it is no longer indirectly included after selecting SPARSE_IRQ. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-02-19ARM: davinci: wrap HW interrupt numbers with a macroBartosz Golaszewski13-239/+246
Once we select SPARSE_IRQ, the interrupt numbers defined in mach/irqs.h will only signify the hardware interrupt offsets, not the interrupt numbers seen by linux. Introduce a wrapper macro that translates the hwirq number to virtual numbers. For now it's just a dummy. Use that macro when specifying the interrupts in resources for platform devices. Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-02-19ARM: davinci: pull davinci_intc_base into the respective intc driversBartosz Golaszewski4-3/+3
davinci_intc_base is defined globally in common.c. Define separate local variables for the aintc and cp-intc drivers and remove the global one. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-02-19ARM: davinci: remove davinci_intc_typeBartosz Golaszewski11-14/+0
We now use the generic ARM irq handler on davinci. There are no more users that check davinci_intc_type. Remove the variable and all its references. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-02-19ARM: davinci: select GENERIC_IRQ_MULTI_HANDLERBartosz Golaszewski4-39/+52
In order to support SPARSE_IRQ we first need to make davinci use the generic irq handler for ARM. Translate the legacy assembly to C and put the irq handlers into their respective drivers (aintc and cp-intc). Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-02-19ARM: davinci: aintc: use irq domainBartosz Golaszewski1-8/+27
We need to create an irq domain if we want to select SPARSE_IRQ. The cp-intc driver already supports it, but aintc doesn't. Use the helpers provided by the generic irq chip abstraction. Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-02-19ARM: davinci: remove intc_host_map from davinci_soc_info structBartosz Golaszewski2-6/+0
The intc_host_map field in struct davinci_soc_info is not used by any board. Remove it as part of the interrupt support cleanup. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-02-12ARM: davinci: da830-evm: remove legacy usb helpersBartosz Golaszewski1-67/+0
The logic implemented by these routines now lives in the da8xx-ohci driver. Remove dead code. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-02-12ARM: davinci: omapl138-hawk: remove legacy usb helpersBartosz Golaszewski1-74/+1
The logic implemented by these routines now lives in the da8xx-ohci driver. Remove dead code. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-02-12ARM: davinci: da830-evm: use gpio lookup entries for usb gpiosBartosz Golaszewski1-0/+10
Add lookup entries for vbus and overcurrent gpios for da830-evm. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-02-12ARM: davinci: omapl138-hawk: use gpio lookup entries for usb gpiosBartosz Golaszewski1-0/+10
Add lookup entries for the vbus and overcurrent gpios for omapl138-hawk. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-02-08ARM: davinci: da850-evm: use GPIO hogs instead of the legacy APIBartosz Golaszewski1-8/+14
In order to drop the hard-coded GPIO base values from the davinci GPIO driver's platform data, we first need to get rid of all calls to the legacy GPIO functions. Convert the mdio configuration to hogging the relevant GPIO line in the da850-evm board file. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-01-10ARM: davinci: mityomapl138: use device properties for at24 eepromBartosz Golaszewski1-6/+6
We want to work towards phasing out the at24_platform_data structure. There are few users and its contents can be represented using generic device properties. Using device properties only will allow us to significantly simplify the at24 configuration code. Remove the at24_platform_data structure and replace it with an array of property entries. Drop the byte_len/size property, as the model name already implies the EEPROM's size. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-01-10ARM: davinci: mityomapl138: use nvmem notifiersBartosz Golaszewski1-3/+15
Stop using the at24_platform_data setup callback in favor of nvmem notifiers. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-01-10ARM: davinci: remove dead code related to MAC address readingBartosz Golaszewski1-15/+0
There are no more users of davinci_get_mac_addr(). Remove it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-01-10ARM: davinci: sffsdr: use device properties for at24 eepromBartosz Golaszewski1-6/+5
We want to work towards phasing out the at24_platform_data structure. There are few users and its contents can be represented using generic device properties. Using device properties only will allow us to significantly simplify the at24 configuration code. Remove the at24_platform_data structure and replace it with an array of property entries. Drop the byte_len/size property, as the model name already implies the EEPROM's size. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-01-10ARM: davinci: sffsdr: fix the at24 eeprom device nameBartosz Golaszewski1-1/+1
The currently used 24lc64 i2c device name doesn't match against any of the devices supported by the at24 driver. Change it to the closest compatible chip. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-01-10ARM: davinci: dm646x-evm: use device properties for at24 eepromBartosz Golaszewski1-8/+5
We want to work towards phasing out the at24_platform_data structure. There are few users and its contents can be represented using generic device properties. Using device properties only will allow us to significantly simplify the at24 configuration code. Remove the at24_platform_data structure and replace it with an array of property entries. Drop the byte_len/size property, as the model name already implies the EEPROM's size. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-01-10ARM: davinci: dm644x-evm: use device properties for at24 eepromBartosz Golaszewski1-8/+5
We want to work towards phasing out the at24_platform_data structure. There are few users and its contents can be represented using generic device properties. Using device properties only will allow us to significantly simplify the at24 configuration code. Remove the at24_platform_data structure and replace it with an array of property entries. Drop the byte_len/size property, as the model name already implies the EEPROM's size. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-01-10ARM: davinci: da830-evm: use device properties for at24 eepromBartosz Golaszewski1-8/+5
We want to work towards phasing out the at24_platform_data structure. There are few users and its contents can be represented using generic device properties. Using device properties only will allow us to significantly simplify the at24 configuration code. Remove the at24_platform_data structure and replace it with an array of property entries. Drop the byte_len/size property, as the model name already implies the EEPROM's size. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-01-10ARM: davinci: dm365-evm: use device properties for at24 eepromBartosz Golaszewski1-8/+5
We want to work towards phasing out the at24_platform_data structure. There are few users and its contents can be represented using generic device properties. Using device properties only will allow us to significantly simplify the at24 configuration code. Remove the at24_platform_data structure and replace it with an array of property entries. Drop the byte_len/size property, as the model name already implies the EEPROM's size. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-01-10ARM: davinci: mityomapl138: don't read the MAC address from machine codeBartosz Golaszewski1-8/+0
This is now done by the emac driver using a registered nvmem cell. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-01-10ARM: davinci: da850-evm: remove dead MTD codeBartosz Golaszewski1-28/+0
We no longer need to register the MTD notifier to read the MAC address as it's now being done in the emac driver. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-01-06Merge tag 'kbuild-v4.21-3' of ↵Linus Torvalds5-26/+3
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - improve boolinit.cocci and use_after_iter.cocci semantic patches - fix alignment for kallsyms - move 'asm goto' compiler test to Kconfig and clean up jump_label CONFIG option - generate asm-generic wrappers automatically if arch does not implement mandatory UAPI headers - remove redundant generic-y defines - misc cleanups * tag 'kbuild-v4.21-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: rename generated .*conf-cfg to *conf-cfg kbuild: remove unnecessary stubs for archheader and archscripts kbuild: use assignment instead of define ... endef for filechk_* rules arch: remove redundant UAPI generic-y defines kbuild: generate asm-generic wrappers if mandatory headers are missing arch: remove stale comments "UAPI Header export list" riscv: remove redundant kernel-space generic-y kbuild: change filechk to surround the given command with { } kbuild: remove redundant target cleaning on failure kbuild: clean up rule_dtc_dt_yaml kbuild: remove UIMAGE_IN and UIMAGE_OUT jump_label: move 'asm goto' support test to Kconfig kallsyms: lower alignment on ARM scripts: coccinelle: boolinit: drop warnings on named constants scripts: coccinelle: check for redeclaration kconfig: remove unused "file" field of yylval union nds32: remove redundant kernel-space generic-y nios2: remove unneeded HAS_DMA define
2019-01-05Merge tag 'pci-v4.21-changes' of ↵Linus Torvalds1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - Remove unused lists from ASPM pcie_link_state (Frederick Lawler) - Fix Broadcom CNB20LE host bridge unintended sign extension (Colin Ian King) - Expand Kconfig "PF" acronyms (Randy Dunlap) - Update MAINTAINERS for arch/x86/kernel/early-quirks.c (Bjorn Helgaas) - Add missing include to drivers/pci.h (Alexandru Gagniuc) - Override Synopsys USB 3.x HAPS device class so dwc3-haps can claim it instead of xhci (Thinh Nguyen) - Clean up P2PDMA documentation (Randy Dunlap) - Allow runtime PM even if driver doesn't supply callbacks (Jarkko Nikula) - Remove status check after submitting Switchtec MRPC Firmware Download commands to avoid Completion Timeouts (Kelvin Cao) - Set Switchtec coherent DMA mask to allow 64-bit DMA (Boris Glimcher) - Fix Switchtec SWITCHTEC_IOCTL_EVENT_IDX_ALL flag overwrite issue (Joey Zhang) - Enable write combining for Switchtec MRPC Input buffers (Kelvin Cao) - Add Switchtec MRPC DMA mode support (Wesley Sheng) - Skip VF scanning on powerpc, which does this in firmware (Sebastian Ott) - Add Amlogic Meson PCIe controller driver and DT bindings (Yue Wang) - Constify histb dw_pcie_host_ops structure (Julia Lawall) - Support multiple power domains for imx6 (Leonard Crestez) - Constify layerscape driver data (Stefan Agner) - Update imx6 Kconfig to allow imx6 PCIe in imx7 kernel (Trent Piepho) - Support armada8k GPIO reset (Baruch Siach) - Support suspend/resume support on imx6 (Leonard Crestez) - Don't hard-code DesignWare DBI/ATU offst (Stephen Warren) - Skip i.MX6 PHY setup on i.MX7D (Andrey Smirnov) - Remove Jianguo Sun from HiSilicon STB maintainers (Lorenzo Pieralisi) - Mask DesignWare interrupts instead of disabling them to avoid lost interrupts (Marc Zyngier) - Add locking when acking DesignWare interrupts (Marc Zyngier) - Ack DesignWare interrupts in the proper callbacks (Marc Zyngier) - Use devm resource parser in mediatek (Honghui Zhang) - Remove unused mediatek "num-lanes" DT property (Honghui Zhang) - Add UniPhier PCIe controller driver and DT bindings (Kunihiko Hayashi) - Enable MSI for imx6 downstream components (Richard Zhu) * tag 'pci-v4.21-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (40 commits) PCI: imx: Enable MSI from downstream components s390/pci: skip VF scanning PCI/IOV: Add flag so platforms can skip VF scanning PCI/IOV: Factor out sriov_add_vfs() PCI: uniphier: Add UniPhier PCIe host controller support dt-bindings: PCI: Add UniPhier PCIe host controller description PCI: amlogic: Add the Amlogic Meson PCIe controller driver dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller arm64: dts: mt7622: Remove un-used property for PCIe arm: dts: mt7623: Remove un-used property for PCIe dt-bindings: PCI: MediaTek: Remove un-used property PCI: mediatek: Remove un-used variant in struct mtk_pcie_port MAINTAINERS: Remove Jianguo Sun from HiSilicon STB DWC entry PCI: dwc: Don't hard-code DBI/ATU offset PCI: imx: Add imx6sx suspend/resume support PCI: armada8k: Add support for gpio controlled reset signal PCI: dwc: Adjust Kconfig to allow IMX6 PCIe host on IMX7 PCI: dwc: layerscape: Constify driver data PCI: imx: Add multi-pd support PCI: Override Synopsys USB 3.x HAPS device class ...
2019-01-06arch: remove redundant UAPI generic-y definesMasahiro Yamada1-17/+0
Now that Kbuild automatically creates asm-generic wrappers for missing mandatory headers, it is redundant to list the same headers in generic-y and mandatory-y. Suggested-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Sam Ravnborg <sam@ravnborg.org>
2019-01-06arch: remove stale comments "UAPI Header export list"Masahiro Yamada1-1/+0
These comments are leftovers of commit fcc8487d477a ("uapi: export all headers under uapi directories"). Prior to that commit, exported headers must be explicitly added to header-y. Now, all headers under the uapi/ directories are exported. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-06kbuild: remove redundant target cleaning on failureMasahiro Yamada3-4/+3
Since commit 9c2af1c7377a ("kbuild: add .DELETE_ON_ERROR special target"), the target file is automatically deleted on failure. The boilerplate code ... || { rm -f $@; false; } is unneeded. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-06jump_label: move 'asm goto' support test to KconfigMasahiro Yamada1-4/+0
Currently, CONFIG_JUMP_LABEL just means "I _want_ to use jump label". The jump label is controlled by HAVE_JUMP_LABEL, which is defined like this: #if defined(CC_HAVE_ASM_GOTO) && defined(CONFIG_JUMP_LABEL) # define HAVE_JUMP_LABEL #endif We can improve this by testing 'asm goto' support in Kconfig, then make JUMP_LABEL depend on CC_HAS_ASM_GOTO. Ugly #ifdef HAVE_JUMP_LABEL will go away, and CONFIG_JUMP_LABEL will match to the real kernel capability. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
2019-01-05Merge branch 'mount.part1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs mount API prep from Al Viro: "Mount API prereqs. Mostly that's LSM mount options cleanups. There are several minor fixes in there, but nothing earth-shattering (leaks on failure exits, mostly)" * 'mount.part1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (27 commits) mount_fs: suppress MAC on MS_SUBMOUNT as well as MS_KERNMOUNT smack: rewrite smack_sb_eat_lsm_opts() smack: get rid of match_token() smack: take the guts of smack_parse_opts_str() into a new helper LSM: new method: ->sb_add_mnt_opt() selinux: rewrite selinux_sb_eat_lsm_opts() selinux: regularize Opt_... names a bit selinux: switch away from match_token() selinux: new helper - selinux_add_opt() LSM: bury struct security_mnt_opts smack: switch to private smack_mnt_opts selinux: switch to private struct selinux_mnt_opts LSM: hide struct security_mnt_opts from any generic code selinux: kill selinux_sb_get_mnt_opts() LSM: turn sb_eat_lsm_opts() into a method nfs_remount(): don't leak, don't ignore LSM options quietly btrfs: sanitize security_mnt_opts use selinux; don't open-code a loop in sb_finish_set_opts() LSM: split ->sb_set_mnt_opts() out of ->sb_kern_mount() new helper: security_sb_eat_lsm_opts() ...
2019-01-05Merge tag 'armsoc-late' of ↵Linus Torvalds12-118/+229
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull more ARM SoC updates from Olof Johansson: "A few updates that we merged late but are low risk for regressions for other platforms (and a few other straggling patches): - I mis-tagged the 'drivers' branch, and missed 3 patches. Merged in here. They're for a driver for the PL353 SRAM controller and a build fix for the qualcomm scm driver. - A new platform, RDA Micro RDA8810PL (Cortex-A5 w/ integrated Vivante GPU, 256MB RAM, Wifi). This includes some acked platform-specific drivers (serial, etc). This also include DTs for two boards with this SoC, OrangePi 2G and OrangePi i86. - i.MX8 is another new platform (NXP, 4x Cortex-A53 + Cortex-M4, 4K video playback offload). This is the first i.MX 64-bit SoC. - Some minor updates to Samsung boards (adding a few peripherals in DTs). - Small rework for SMP bootup on STi platforms. - A couple of TEE driver fixes. - A couple of new config options (bcm2835 thermal, Uniphier MDMAC) enabled in defconfigs" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits) ARM: multi_v7_defconfig: enable CONFIG_UNIPHIER_MDMAC arm64: defconfig: Re-enable bcm2835-thermal driver MAINTAINERS: Add entry for RDA Micro SoC architecture tty: serial: Add RDA8810PL UART driver ARM: dts: rda8810pl: Add interrupt support for UART dt-bindings: serial: Document RDA Micro UART ARM: dts: rda8810pl: Add timer support ARM: dts: Add devicetree for OrangePi i96 board ARM: dts: Add devicetree for OrangePi 2G IoT board ARM: dts: Add devicetree for RDA8810PL SoC ARM: Prepare RDA8810PL SoC dt-bindings: arm: Document RDA8810PL and reference boards dt-bindings: Add RDA Micro vendor prefix ARM: sti: remove pen_release and boot_lock arm64: dts: exynos: Add Bluetooth chip to TM2(e) boards arm64: dts: imx8mq-evk: enable watchdog arm64: dts: imx8mq: add watchdog devices MAINTAINERS: add i.MX8 DT path to i.MX architecture arm64: add support for i.MX8M EVK board arm64: add basic DTS for i.MX8MQ ...
2019-01-05Merge tag 'for-4.21' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds48-593/+579
Pull ARM updates from Russell King: "Included in this update: - Florian Fainelli noticed that userspace segfaults caused by the lack of kernel-userspace helpers was hard to diagnose; we now issue a warning when userspace tries to use the helpers but the kernel has them disabled. - Ben Dooks wants compatibility for the old ATAG serial number with DT systems. - Some cleanup of assembly by Nicolas Pitre. - User accessors optimisation from Vincent Whitchurch. - More robust kdump on SMP systems from Yufen Wang. - Sebastian Andrzej Siewior noticed problems with the SMP "boot_lock" on RT kernels, and so we convert the Versatile series of platforms to use a raw spinlock instead, consolidating the Versatile implementation. We entirely remove the boot_lock on OMAP systems, where it's unnecessary. Further patches for other systems will be submitted for the following merge window. - Start switching old StrongARM-11x0 systems to use gpiolib rather than their private GPIO implementation - mostly PCMCIA bits. - ARM Kconfig cleanups. - Cleanup a mostly harmless mistake in the recent Spectre patch in 4.20 (which had the effect that data that can be placed into the init sections was incorrectly always placed in the rodata section)" * tag 'for-4.21' of git://git.armlinux.org.uk/~rmk/linux-arm: (25 commits) ARM: omap2: remove unnecessary boot_lock ARM: versatile: rename and comment SMP implementation ARM: versatile: convert boot_lock to raw ARM: vexpress/realview: consolidate immitation CPU hotplug ARM: fix the cockup in the previous patch ARM: sa1100/cerf: switch to using gpio_led_register_device() ARM: sa1100/assabet: switch to using gpio leds ARM: sa1100/assabet: add gpio keys support for right-hand two buttons ARM: sa1111: remove legacy GPIO interfaces pcmcia: sa1100*: remove redundant bvd1/bvd2 setting ARM: pxa/lubbock: switch PCMCIA to MAX1600 library ARM: pxa/mainstone: switch PCMCIA to MAX1600 library and gpiod APIs ARM: sa1100/neponset: switch PCMCIA to MAX1600 library and gpiod APIs ARM: sa1100/jornada720: switch PCMCIA to gpiod APIs pcmcia: add MAX1600 library ARM: sa1100: explicitly register sa11x0-pcmcia devices ARM: 8813/1: Make aligned 2-byte getuser()/putuser() atomic on ARMv6+ ARM: 8812/1: Optimise copy_{from/to}_user for !CPU_USE_DOMAINS ARM: 8811/1: always list both ldrd/strd registers explicitly ARM: 8808/1: kexec:offline panic_smp_self_stop CPU ...
2019-01-05Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-2/+2
Merge more updates from Andrew Morton: - procfs updates - various misc bits - lib/ updates - epoll updates - autofs - fatfs - a few more MM bits * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (58 commits) mm/page_io.c: fix polled swap page in checkpatch: add Co-developed-by to signature tags docs: fix Co-Developed-by docs drivers/base/platform.c: kmemleak ignore a known leak fs: don't open code lru_to_page() fs/: remove caller signal_pending branch predictions mm/: remove caller signal_pending branch predictions arch/arc/mm/fault.c: remove caller signal_pending_branch predictions kernel/sched/: remove caller signal_pending branch predictions kernel/locking/mutex.c: remove caller signal_pending branch predictions mm: select HAVE_MOVE_PMD on x86 for faster mremap mm: speed up mremap by 20x on large regions mm: treewide: remove unused address argument from pte_alloc functions initramfs: cleanup incomplete rootfs scripts/gdb: fix lx-version string output kernel/kcov.c: mark write_comp_data() as notrace kernel/sysctl: add panic_print into sysctl panic: add options to print system info when panic happens bfs: extra sanity checking and static inode bitmap exec: separate MM_ANONPAGES and RLIMIT_STACK accounting ...
2019-01-04Merge branch 'next/drivers' into next/lateOlof Johansson1-6/+17
Merge in a few missing patches from the pull request (my copy of the branch was behind the staged version in linux-next). * next/drivers: memory: pl353: Add driver for arm pl353 static memory controller dt-bindings: memory: Add pl353 smc controller devicetree binding information firmware: qcom: scm: fix compilation error when disabled Signed-off-by: Olof Johansson <olof@lixom.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-09 13:26:32 +0000