summaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2009-12-11OMAP: omap_device: track latency in nanosecondsKevin Hilman2-6/+6
Rather than having to do a usecs = nsecs / NSECS_PER_USEC to track latency in usecs, just track it in nanoseconds. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-12-11OMAP: omap_device: fix nsec/usec conversion in latency calculationsKevin Hilman1-2/+2
Use usecs = nsecs / NSEC_PER_USEC; instead of usecs = nsecs * NSEC_PER_USEC; Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-12-11OMAP: hwmod: warn on missing clockdomainKevin Hilman1-0/+3
WARN if a clock/hwmod is missing a clockdomain association since resulting hwmod will not be able to correctly enable/disable clocks. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-12-11OMAP: omap_device: use read_persistent_clock() instead of getnstimeofday()Kevin Hilman1-4/+4
During suspend and resume, when omap_device deactivation and activation is happening, the timekeeping subsystem has likely already been suspended. Thus getnstimeofday() will fail and trigger a WARN(). Use read_persistent_clock() instead of getnstimeofday() to avoid this. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-12-11OMAP: omap_device: use UINT_MAX for default wakeup latency limitKevin Hilman1-1/+1
The _dev_wakeup_lat_limit field of struct omap_device is u32, so use UINT_MAX instead of INT_MAX for the default maximum. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-12-11OMAP: omap_device: add to_omap_device() macroKevin Hilman1-1/+3
Following the model of to_platform_device(), add to_omap_device() macro so a platform_device pointer can be converted into an omap_device pointer. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-12-11OMAP3 hwmod: drop most of the OCP_SYSCONFIG.CLOCKACTIVITY codePaul Walmsley1-83/+5
Earlier, the hwmod code had considered the OCP_SYSCONFIG.CLOCKACTIVITY bits to be incremental power saving bits, controlling internal IP block clock gates. This was a misapprehension. The CLOCKACTIVITY bits are used to indicate, in advance, which clocks will be cut when the module acknowledges an idle request. This enables the IP block to take whatever action is necessary to complete any in-progress work before asserting its IdleAck. In the current Linux-OMAP code, this implies that the clock framework should be changing module CLOCKACTIVITY bits as module clocks are enabled and disabled. We don't do that yet, but in the future, we should. This must wait until the clock tree is annotated with omap_hwmod pointers (or vice-versa). In the meantime, drop most of the hwmod code that controls CLOCKACTIVITY bits to avoid confusion. This patch has benefited from many illuminating discussions with (in alphabetical order) Benoît Cousson <b-cousson@ti.com>, Rajendra Nayak <rnayak@ti.com>, and Sebastien Sabatier <s-sabatier1@ti.com>. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Sebastien Sabatier <s-sabatier1@ti.com> Cc: Benoît Cousson <b-cousson@ti.com>
2009-12-11OMAP hwmod: add names to module MPU IRQ linesPaul Walmsley2-4/+19
Replace the existing u8 array of module MPU IRQ lines with a struct that includes a name - similar to the existing struct omap_hwmod_dma_info. Device drivers can then use platform_get_resource_byname() to retrieve specific IRQs without nasty dependencies on array ordering. Thanks to Benoît Cousson <b-cousson@ti.com> and Kevin Hilman <khilman@deeprootsystems.com> for feedback on this approach. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2009-12-11OMAP3 hwmod: Add automatic OCP_SYSCONFIG AUTOIDLE handlingPaul Walmsley2-3/+42
This patch fills in the OCP_SYSCONFIG.AUTOIDLE handling in the OMAP hwmod code. After this patch, the hwmod code will set the module AUTOIDLE bit (generally <module>.OCP_SYSCONFIG.AUTOIDLE) to 1 by default upon enable. If the hwmod flag HWMOD_NO_OCP_AUTOIDLE is set, AUTOIDLE will be set to 0 upon enable. Upon module disable, AUTOIDLE will be set to 1. Enabling module autoidle should save some power. The only reason to not set the OCP_SYSCONFIG.AUTOIDLE bit is if there is a bug in the module RTL, e.g., the MPUINTC block on OMAP3. Comments from Kevin Hilman <khilman@deeprootsystems.com> inspired this patch, and Kevin tested an earlier version of this patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-12-11OMAP3 hwmod: reprogram OCP_SYSCONFIG register after setting SOFTRESETPaul Walmsley1-5/+13
Reprogram the module's OCP_SYSCONFIG register after module reset (SOFTRESET = 1). This may not be needed, but the definition of the reset performed by the SOFTRESET bit is unclear. Kevin Hilman <khilman@deeprootsystems.com> tested an earlier version of this patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-12-11OMAP clock/hwmod: fix off-by-one errorsPaul Walmsley4-14/+31
Fix loop bailout off-by-one bugs reported by Juha Leppänen <juha_motorsportcom@luukku.com>. This second version incorporates comments from Russell King <linux@arm.linux.org.uk>. A new macro, 'omap_test_timeout', has been created, with cleaner code, and existing code has been converted to use it. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Juha Leppänen <juha_motorsportcom@luukku.com> Cc: Russell King <linux@arm.linux.org.uk>
2009-12-11OMAP3: PM: Fix for MPU power domain MEM BANK positionThara Gopinath3-1/+11
MPU power domain bank 0 bits are displayed in position of bank 1 in PWRSTS and PREPWRSTS registers. So read them from correct position Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-12-11OMAP3: SDRC: Place SDRC AC timing and MR changes in CORE DVFS SRAM code ↵Paul Walmsley2-2/+29
behind Kconfig The code that reprograms the SDRC memory controller during CORE DVFS, mach-omap2/sram34xx.S:omap3_sram_configure_core_dpll(), does not ensure that all L3 initiators are prevented from accessing the SDRAM before modifying the SDRC AC timing and MR registers. This can cause memory to be corrupted or cause the SDRC to enter an unpredictable state. This patch places that code behind a Kconfig option, CONFIG_OMAP3_SDRC_AC_TIMING for now, and adds a note explaining what is going on. Ideally the code can be added back in once supporting code is present to ensure that other initiators aren't touching the SDRAM. At the very least, these registers should be reprogrammable during kernel init to deal with buggy bootloaders. Users who know that all other system initiators will not be touching the SDRAM can also re-enable this Kconfig option. This is a modification of a patch originally written by Rajendra Nayak <rnayak@ti.com> (the original is at http://patchwork.kernel.org/patch/51927/). Rather than removing the code completely, this patch just comments it out. Thanks to Benoît Cousson <b-cousson@ti.com> and Christophe Sucur <c-sucur@ti.com> for explaining the technical basis for this and for explaining what can be done to make this path work in future code. Thanks to Richard Woodruff <r-woodruff2@ti.com>, Nishanth Menon <nm@ti.com>, and Olof Johansson <olof@lixom.net> for their comments. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Christophe Sucur <c-sucur@ti.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Nishanth Menon <nm@ti.com> Cc: Olof Johansson <olof@lixom.net>
2009-12-11OMAP2/3 powerdomain: return errors rather than returning the output of IS_ERR()Roel Kluin1-6/+6
IS_ERR returns only 1 or 0, and the functions return a negative error in other cases anyways. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-12-11OMAP powerdomain: rearrange struct powerdomain to save some memoryPaul Walmsley1-3/+3
This patch rearranges the order of structure members in struct powerdomain to avoid wasting memory due to alignment restrictions. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-12-11OMAP powerdomain/PM: use symbolic constants for the max number of power statesPaul Walmsley3-5/+7
Replace some bare constants with power states. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2009-12-11OMAP clockdomain/powerdomain: optimize out sleepdep code on OMAP24xxPaul Walmsley1-6/+6
OMAP24xx chips don't support software-configurable sleep dependencies. Test early for this so the compiler can redact the entire function body on OMAP24xx. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-12-11OMAP clockdomain/powerdomain: remove CONFIG_OMAP_DEBUG_{CLOCK,POWER}DOMAINPaul Walmsley3-49/+23
Avoid cluttering the Kconfig space with debug options that are rarely used. These can now be enabled and disabled by patching the "#undef DEBUG" in the source files with "#define DEBUG", conforming to the practice for the rest of the linux-omap code. Also, while we're here, some lines in plat-omap/Kconfig use sets of leading spaces when those lines should start with tabs. Convert most of them to use tabs. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com>
2009-12-11OMAP2/3 PRCM: don't export prm_*(), cm_*() functionsPaul Walmsley1-6/+0
Device drivers and loadable modules should not be calling these prm_* and cm_* functions, so stop exporting them. Only core code and device driver integration code (in arch/arm/*omap*) should call these functions. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-12-11OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.cPaul Walmsley8-1013/+1096
The OMAP1 clock code currently #includes a large .h file full of static data structures. Instead, define the data in a .c file. Russell King <linux@arm.linux.org.uk> proposed this new arrangement: http://marc.info/?l=linux-omap&m=125967425908895&w=2 This patch also deals with most of the flagrant checkpatch violations. While here, separate the mpu_rate data structures out into their own files, opp.h and opp_data.c. In the long run, these mpu_rate tables should be replaced with OPP code. Also includes a patch from Felipe Balbi <felipe.balbi@nokia.com> to mark omap1_clk_functions as __initdata to avoid a section warning: http://patchwork.kernel.org/patch/64366/ Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Felipe Balbi <felipe.balbi@nokia.com> Cc: Nishanth Menon <nm@ti.com>
2009-12-11OMAP1 clock: convert test in disable_unused() to use ENABLE_ON_INITPaul Walmsley2-12/+16
mach-omap1/clock.c:omap1_clk_disable_unused() contains a test that assumes that the clock structures are available in the file's namespace. After a following patch, this will no longer be the case. So we need to reimplement that test. It turns out that we already have a facility in the clock framework to handle this case - the ENABLE_ON_INIT flag - used on OMAP2/3. Remove the offending test and mark the clocks that it was intended to catch as ENABLE_ON_INIT. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-12-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds3-0/+130
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (122 commits) USB: mos7840: add device IDs for B&B electronics devices USB: ftdi_sio: add USB device ID's for B&B Electronics line USB: musb: musb_host: fix sparse warning USB: musb: musb_gadget: fix sparse warning USB: musb: omap2430: fix sparse warning USB: core: message: fix sparse warning USB: core: hub: fix sparse warning USB: core: fix sparse warning for static function USB: Added USB_ETH_RNDIS to use instead of CONFIG_USB_ETH_RNDIS USB: Check bandwidth when switching alt settings. USB: Refactor code to find alternate interface settings. USB: xhci: Fix command completion after a drop endpoint. USB: xhci: Make reverting an alt setting "unfailable". USB: usbtmc: Use usb_clear_halt() instead of custom code. USB: xhci: Add correct email and files to MAINTAINERS entry. USB: ehci-omap.c: introduce missing kfree USB: xhci-mem.c: introduce missing kfree USB: add remove_id sysfs attr for usb drivers USB: g_multi kconfig: fix depends and help text USB: option: add pid for ZTE ...
2009-12-11OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx*Paul Walmsley10-884/+1044
The OMAP2 clock code currently #includes a large .h file full of static data structures. Instead, define the data in a .c file. Russell King <linux@arm.linux.org.uk> proposed this new arrangement: http://marc.info/?l=linux-omap&m=125967425908895&w=2 This patch also deals with most of the flagrant checkpatch violations. While here, separate the prcm_config data structures out into their own files, opp2xxx.h and opp24{2,3}0_data.c, and only build in the OPP tables for the target device. This should save some memory. In the long run, these prcm_config tables should be replaced with OPP code. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Nishanth Menon <nm@ti.com>
2009-12-11OMAP3 clock: convert clock34xx.h to clock34xx_data.cPaul Walmsley8-3385/+3457
The OMAP3 clock code currently #includes a large .h file full of static data structures. Instead, define the data in a .c file. Russell King <linux@arm.linux.org.uk> proposed this new arrangement: http://marc.info/?l=linux-omap&m=125967425908895&w=2 Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Russell King <linux@arm.linux.org.uk>
2009-12-11OMAP2xxx clock: remove implicit dependency between rate CPU flag and ↵Paul Walmsley1-1/+4
clkdev_omap CPU flag cpu_mask is reused in the OMAP2xxx clock code to match against both the CPU-specific rate flags (e.g., RATE_IN_2420) and the OMAP clkdev integration code CPU flags (e.g., CK_242X). This means that any patch that renumbers the CK_* macros, as the next patch does, will probably break. This patch separates the clkdev_omap and clksel_rate CPU type detection flags so the CK_* macros can be renumbered freely. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-12-11OMAP2/3: move SDRC macros to mach-omap2/sdrc.hPaul Walmsley2-14/+16
clock34xx.c contains some macros which probably belong in mach-omap2/sdrc.h. Move those macros to mach-omap2/sdrc.h. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-12-11OMAP2 clock: APLL code shouldn't rely on static clocks in its local namespacePaul Walmsley2-14/+25
Similar to the previous patch, the APLL code relied on the presence of the static struct clks in its own namespace. The APLL code didn't use them for validation, however - it adjusted its own internal state depending on the struct clk * that called it. Now that static struct clks are leaving the clock24xx.c namespace, use a more durable method: split the omap2_clk_fixed_enable() function into omap2_clk_apll96_enable() and omap2_clk_apll54_enable(). They still share a disable function. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-12-11OMAP1/2/3 clock: remove paranoid checks in preparation for ↵Paul Walmsley3-30/+0
clock{,2xxx,3xxx}_data.c Some parts of the clock code took advantage of the fact that the statically allocated clock tree was in clock{,24xx,34xx}.c's local namespace to do some extra argument checks. These are overzealous and are more difficult to maintain when the clock tree is in a separate namespace, so, remove them. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-12-11USB: Add EHCI support for MX27 and MX31 based boardsDaniel Mack3-0/+130
The Freescale MX27 and MX31 SoCs have a EHCI controller onboard. The controller is capable of USB on the go. This patch adds a driver to support all three of them. Users have to pass details about serial interface configuration in the platform data. The USB OTG core used here is the ARC core, so the driver should be renamed and probably be merged with ehci-fsl.c eventually. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11fix broken aliasing checks for MAP_FIXED on sparc32, mips, arm and shAl Viro1-1/+2
We want addr - (pgoff << PAGE_SHIFT) consistently coloured... Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-11Unify sys_mmap*Al Viro2-31/+3
New helper - sys_mmap_pgoff(); switch syscalls to using it. Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-11arm: add arch_mmap_check(), get rid of sys_arm_mremap()Al Viro3-26/+4
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-10Merge branch 'for-linus' of git://gitorious.org/linux-omap-dss2/linuxLinus Torvalds14-433/+957
* 'for-linus' of git://gitorious.org/linux-omap-dss2/linux: MAINTAINERS: Add OMAP2/3 DSS and OMAPFB maintainer OMAP: SDP: Enable DSS2 for OMAP3 SDP board OMAP: DSS2: Taal DSI command mode panel driver OMAP: DSS2: Add generic and Sharp panel drivers OMAP: DSS2: omapfb driver OMAP: DSS2: DSI driver OMAP: DSS2: SDI driver OMAP: DSS2: RFBI driver OMAP: DSS2: Video encoder driver OMAP: DSS2: DPI driver OMAP: DSS2: DISPC OMAP: DSS2: Add more core files OMAP: DSS2: Display Subsystem Driver core OMAP: DSS2: Documentation for DSS2 OMAP: Add support for VRFB rotation engine OMAP: Add VRAM manager OMAP: OMAPFB: add omapdss device OMAP: OMAPFB: split omapfb.h OMAP2: Add funcs for writing SMS_ROT_* registers
2009-12-10HTC Dream: mmc compilation fixesPavel Machek1-0/+26
Add missing include for msm_sdcc compilation, and remove pwrsink support that is not mainline, yet. Signed-off-by: Pavel Machek <pavel@ucw.cz> [dwalker@codeaurora.org : fixed indent in mmc.h] Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2009-12-09Merge branch 'for-linus' of ↵Linus Torvalds6-4/+129
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (51 commits) Input: appletouch - give up maintainership Input: dm355evm_kbd - switch to using sparse keymap library Input: wistron_btns - switch to using sparse keymap library Input: add generic support for sparse keymaps Input: fix memory leak in force feedback core Input: wistron - remove identification strings from DMI table Input: psmouse - remove identification strings from DMI tables Input: atkbd - remove identification strings from DMI table Input: i8042 - remove identification strings from DMI tables DMI: allow omitting ident strings in DMI tables Input: psmouse - do not carry DMI data around Input: matrix-keypad - switch to using dev_pm_ops Input: keyboard - fix lack of locking when traversing handler->h_list Input: gpio_keys - scan gpio state at probe and resume time Input: keyboard - add locking around event handling Input: usbtouchscreen - add support for ET&T TC5UH touchscreen controller Input: xpad - add two new Xbox 360 devices Input: polled device - do not start polling if interval is zero Input: polled device - schedule first poll immediately Input: add S3C24XX touchscreen driver ...
2009-12-09Merge branch 's3c24xx-updates' of git://git.fluff.org/bjdooks/linuxLinus Torvalds4-4/+8
* 's3c24xx-updates' of git://git.fluff.org/bjdooks/linux: ARM: S3C24XX: DMA: Use valid index when accessing array ARM: S3C: move s3c_pwm_remove to .devexit.text ARM: S3C24XX: Export s3c24xx_set_fiq for modules. ARM: S3C: move s3c_adc_remove to .devexit.text
2009-12-09Merge branch 'for-linus' of ↵Linus Torvalds36-58/+23
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits) tree-wide: fix misspelling of "definition" in comments reiserfs: fix misspelling of "journaled" doc: Fix a typo in slub.txt. inotify: remove superfluous return code check hdlc: spelling fix in find_pvc() comment doc: fix regulator docs cut-and-pasteism mtd: Fix comment in Kconfig doc: Fix IRQ chip docs tree-wide: fix assorted typos all over the place drivers/ata/libata-sff.c: comment spelling fixes fix typos/grammos in Documentation/edac.txt sysctl: add missing comments fs/debugfs/inode.c: fix comment typos sgivwfb: Make use of ARRAY_SIZE. sky2: fix sky2_link_down copy/paste comment error tree-wide: fix typos "couter" -> "counter" tree-wide: fix typos "offest" -> "offset" fix kerneldoc for set_irq_msi() spidev: fix double "of of" in comment comment typo fix: sybsystem -> subsystem ...
2009-12-09Merge branch 'davinci-for-linus' of ↵Linus Torvalds47-1762/+3051
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci * 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: (69 commits) davinci: Initial support for Neuros OSD2 platform. davinci: remove unused variable in arch/arm/mach-davinci/board-sffsdr.c davinci: fix section mismatch warning in arch/arm/mach-davinci/board-dm646x-evm.c DaVinci: DM365: Enable DaVinci RTC support for DM365 EVM DA8xx/OMAP-L1xx: Add high speed SD/MMC capabilities davinci: DA8XX/OMAP-L1XX: enable cpuidle and regulator in defconfig davinci: DA850/OMAP-L138: avoid using separate initcall for initializing regulator davinci: DA850/OMAP-L138 EVM: register for cpuidle support davinci: DA8XX/OMAP-L1XX: add support for cpuidle driver register davinci: add CPU idle driver davinci: DA8XX/OMAP-L1XX: fix compiler warning davinci: DA850/OMAP-L138: eliminate static function declaration davinci: DA850/OMAP-L138 EVM: simplify configuration of emac in MII/RMII mode davinci: DA850/OMAP-L138 EVM: get rid of DA850_UI_EXP config option davinci: DA850/OMAP-L138 EVM: implement autodetect of RMII PHY davinci: DA830/OMAP-L137 EVM: do not configure NAND on UI card when MMC/SD is selected davinci: DA830/OMAP-L137 EVM: use runtime detection for UI card davinci: DA830/OMAP-L137 EVM: remove ifdefs inside da830_evm_init() davinci: DA830/OMAP-L137 EVM: fix warning with default config davinci: Add NAND support for DA830/OMAP-L137 EVM platform ...
2009-12-09OMAP: SDP: Enable DSS2 for OMAP3 SDP boardTomi Valkeinen2-19/+176
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com>
2009-12-09OMAP: DSS2: omapfb driverTomi Valkeinen1-1/+46
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2009-12-09OMAP: DSS2: Display Subsystem Driver coreTomi Valkeinen1-0/+575
The core files of DSS2. DSS2 commits are split a bit artificially to make the individual commits smaller, and DSS2 doesn't compile properly without the rest of the core commits. This shouldn't be a problem, as no configuration uses DSS2 yet. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2009-12-09OMAP: Add support for VRFB rotation engineTomi Valkeinen1-0/+50
VRFB rotation engine is a block in OMAP2/3 that offers 12 independent contexts that can be used for framebuffer rotation. Each context has a backend area of real memory, where it stores the pixels in undisclosed format. This memory is offered to users via 4 virtual memory areas, which see the same memory area in different rotation angles (0, 90, 180 and 270 degrees). Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2009-12-09OMAP: Add VRAM managerTomi Valkeinen3-0/+72
Add a Video RAM manager for OMAP 2 and 3 platforms. VRAM manager is used to allocate large continuous blocks of SDRAM or SRAM. The features VRAM manager has that are missing from dma_alloc_* functions are: - Support for OMAP2's SRAM - Allocate without ioremapping - Allocate at defined physical addresses - Allows larger VRAM area and larger allocations The upcoming DSS2 uses VRAM manager. VRAM area size can be defined in kernel config, board file or with kernel boot parameters. Board file definition overrides kernel config, and boot parameter overrides kernel config and board file. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2009-12-09OMAP: OMAPFB: add omapdss deviceTomi Valkeinen2-11/+11
The upcoming new display subsystem driver is divided to two devices, omapdss and omapfb, of which omapdss handles the actual hardware. This patch adds a dummy omapdss platform device for the current omapfb driver, which is then used to get the clocks. This will make it possible for the current and the new display drivers to co-exist. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com>
2009-12-09OMAP: OMAPFB: split omapfb.hTomi Valkeinen4-401/+3
Split arch/arm/plat-omap/include/mach/omapfb.h into two files: include/linux/omapfb.h - ioctls etc for userspace and some kernel stuff for board files drivers/video/omap/omapfb.h - for omapfb internal use This cleans up omapfb.h and also makes it easier for the upcoming new DSS driver to co-exist with the old driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com>
2009-12-09OMAP2: Add funcs for writing SMS_ROT_* registersTomi Valkeinen2-1/+24
SMS_ROT_* registers are used by VRFB rotation engine. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Paul Walmsley <paul@pwsan.com>
2009-12-08ARM: S3C24XX: DMA: Use valid index when accessing arrayRamax Lo1-2/+4
The DMA_CH_VALID bit used in the channel index should be masked out before using it to access the channel array. Signed-off-by: Ramax Lo <ramaxlo@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-08Merge branch 'for-2.6.33' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds1-0/+1
* 'for-2.6.33' of git://git.kernel.dk/linux-2.6-block: (113 commits) cfq-iosched: Do not access cfqq after freeing it block: include linux/err.h to use ERR_PTR cfq-iosched: use call_rcu() instead of doing grace period stall on queue exit blkio: Allow CFQ group IO scheduling even when CFQ is a module blkio: Implement dynamic io controlling policy registration blkio: Export some symbols from blkio as its user CFQ can be a module block: Fix io_context leak after failure of clone with CLONE_IO block: Fix io_context leak after clone with CLONE_IO cfq-iosched: make nonrot check logic consistent io controller: quick fix for blk-cgroup and modular CFQ cfq-iosched: move IO controller declerations to a header file cfq-iosched: fix compile problem with !CONFIG_CGROUP blkio: Documentation blkio: Wait on sync-noidle queue even if rq_noidle = 1 blkio: Implement group_isolation tunable blkio: Determine async workload length based on total number of queues blkio: Wait for cfq queue to get backlogged if group is empty blkio: Propagate cgroup weight updation to cfq groups blkio: Drop the reference to queue once the task changes cgroup blkio: Provide some isolation between groups ...
2009-12-08Merge branch 'omap-for-linus' of ↵Linus Torvalds248-2908/+18179
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (149 commits) arm: omap: Add omap3_defconfig AM35xx: Defconfig for AM3517 EVM board AM35xx: Add support for AM3517 EVM board omap: 3630sdp: defconfig creation omap: 3630sdp: introduce 3630 sdp board support omap3: Add defconfig for IGEP v2 board omap3: Add minimal IGEP v2 support omap3: Add CompuLab CM-T35 defconfig omap3: Add CompuLab CM-T35 board support omap3: rx51: Add wl1251 wlan driver support omap3: rx51: Add SDRAM init omap1: Add default kernel configuration for Herald omap1: Add board support and LCD for HTC Herald omap: zoom2: update defconfig for LL_DEBUG_NONE omap: zoom3: defconfig creation omap3: zoom: Introduce zoom3 board support omap3: zoom: Drop i2c-1 speed to 2400 omap3: zoom: rename zoom2 name to generic zoom omap3: zoom: split board file for software reuse omap3evm: MIgrate to smsc911x ethernet driver ... Fix trivial conflict (two unrelated config options added next to each other) in arch/arm/mach-omap2/Makefile
2009-12-08Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds417-4911/+23599
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (272 commits) Fix soc_common PCMCIA configuration ARM: 5827/1: SA1100: h3100/h3600: emit messages on failed gpio_request ARM: 5826/1: SA1100: h3100/h3600: always build htc-egpio driver ARM: 5825/1: SA1100: h3600: update defconfig ARM: 5824/1: SA1100: reuse h3600 PCMCIA driver on h3100 ARM: 5823/1: SA1100: h3100/h3600: add support for gpio-keys ARM: 5822/1: SA1100: h3100/h3600: clean up #includes ARM: 5821/1: SA1100: h3100/h3600: revise copyright boilerplates ARM: 5820/1: SA1100: h3100/h3600: split h3600.c ARM: 5819/1: SA1100: h3100/h3600: merge h3600.h and h3600_gpio.h into h3xxx.h ARM: 5818/1: SA1100: h3100/h3600: drop old GPIO definitions ARM: 5817/1: SA1100: h3100/h3600: configure all unused gpios as inputs ARM: 5816/1: SA1100: h3600: remove IRQ_GPIO_* definitions ARM: 5815/1: SA1100: h3100/h3600: remove now unused assign_h3600_egpio handlers ARM: 5814/1: SA1100: h3100/h3600: convert all users of assign_h3600_egpio to gpiolib ARM: 5813/1: SA1100: h3100/h3600: add htc-egpio driver ARM: 5812/1: SA1100: h3100/h3600: separate machine-specific LCD helpers ARM: 5811/2: pcmcia: convert sa1100_h3600 driver to gpiolib ARM: 5799/1: SA1100: h3600: stop setting direction for LCD pins ARM: 5798/1: SA1100: h3600: remove unused cruft from h3600.h ...
generated by cgit v1.2.3 (git 2.39.1) at 2025-04-26 06:34:16 +0000