summaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2010-08-05[ARM] tegra: SMP supportColin Cross7-4/+420
Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Erik Gilling <konkers@android.com>
2010-08-05[ARM] tegra: Add clock supportColin Cross8-0/+2072
v2: fixes from Russell King: - include linux/io.h instead of asm/io.h - fix whitespace in Kconfig - Use spin_lock_init to initialize lock - Return -ENOSYS instead of BUG for unimplemented clock ops - Use proper return values in tegra2 clock ops additional changes: - Rename some clocks to match dev_ids - add rate propagation - add debugfs entries - add support for clock listed in clk_lookup under multiple dev_ids v3: - Replace per-clock locking with global clock lock - Autodetect clock state on init - Let clock dividers pick next lower possible frequency - Add support for clock init tables - Minor bug fixes - Fix checkpatch issues Signed-off-by: Colin Cross <ccross@android.com>
2010-08-05[ARM] tegra: Add IRQ supportErik Gilling3-0/+208
v2: fixes from Russell King - include linux/io.h instead of asm/io.h and mach/io.h Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Erik Gilling <konkers@android.com>
2010-08-05[ARM] tegra: initial tegra supportErik Gilling20-1/+923
v2: Fixes from Mike Rapoport - remove unused header files (mach/dma.h and mach/nand.h) - remove tegra 1 references from Makefile.boot v2: fixes from Russell King - remove mach/io.h include from mach/iomap.h - fix whitespace in Kconfig v2: from Colin Cross - fix invalid immediate in debug-macro.S v3: - allow selection of multiple boards Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Erik Gilling <konkers@android.com>
2010-08-04Merge branch 'for-next' of ↵Linus Torvalds10-18/+10
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (48 commits) Documentation: update broken web addresses. fix comment typo "choosed" -> "chosen" hostap:hostap_hw.c Fix typo in comment Fix spelling contorller -> controller in comments Kconfig.debug: FAIL_IO_TIMEOUT: typo Faul -> Fault fs/Kconfig: Fix typo Userpace -> Userspace Removing dead MACH_U300_BS26 drivers/infiniband: Remove unnecessary casts of private_data fs/ocfs2: Remove unnecessary casts of private_data libfc: use ARRAY_SIZE scsi: bfa: use ARRAY_SIZE drm: i915: use ARRAY_SIZE drm: drm_edid: use ARRAY_SIZE synclink: use ARRAY_SIZE block: cciss: use ARRAY_SIZE comment typo fixes: charater => character fix comment typos concerning "challenge" arm: plat-spear: fix typo in kerneldoc reiserfs: typo comment fix update email address ...
2010-08-04Merge branch 'for-linus' of ↵Linus Torvalds1-0/+43
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits) Input: adp5588-keypad - fix NULL dereference in adp5588_gpio_add() Input: cy8ctmg110 - capacitive touchscreen support Input: keyboard - also match braille-only keyboards Input: adp5588-keys - export unused GPIO pins Input: xpad - add product ID for Hori Fighting Stick EX2 Input: adxl34x - fix leak and use after free Input: samsung-keypad - Add samsung keypad driver Input: i8042 - reset keyboard controller wehen resuming from S2R Input: synaptics - set min/max for finger width Input: synaptics - only report width on hardware that supports it Input: evdev - signal that device is writable in evdev_poll() Input: mousedev - signal that device is writable in mousedev_poll() Input: change input handlers to use bool when possible Input: document the MT event slot protocol Input: introduce MT event slots Input: usbtouchscreen - implement reset_resume Input: usbtouchscreen - implement runtime power management Input: usbtouchscreen - implement basic suspend/resume Input: Add ATMEL QT602240 touchscreen driver Input: fix signedness warning in input_set_keycode() ...
2010-08-04Merge branch 'master' into for-nextJiri Kosina697-200711/+16762
2010-08-03Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds477-6260/+15546
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (291 commits) ARM: AMBA: Add pclk support to AMBA bus infrastructure ARM: 6278/2: fix regression in RealView after the introduction of pclk ARM: 6277/1: mach-shmobile: Allow users to select HZ, default to 128 ARM: 6276/1: mach-shmobile: remove duplicate NR_IRQS_LEGACY ARM: 6246/1: mmci: support larger MMCIDATALENGTH register ARM: 6245/1: mmci: enable hardware flow control on Ux500 variants ARM: 6244/1: mmci: add variant data and default MCICLOCK support ARM: 6243/1: mmci: pass power_mode to the translate_vdd callback ARM: 6274/1: add global control registers definition header file for nuc900 mx2_camera: fix type of dma buffer virtual address pointer mx2_camera: Add soc_camera support for i.MX25/i.MX27 arm/imx/gpio: add spinlock protection ARM: Add support for the LPC32XX arch ARM: LPC32XX: Arch config menu supoport and makefiles ARM: LPC32XX: Phytec 3250 platform support ARM: LPC32XX: Misc support functions ARM: LPC32XX: Serial support code ARM: LPC32XX: System suspend support ARM: LPC32XX: GPIO, timer, and IRQ drivers ARM: LPC32XX: Clock driver ...
2010-08-02Merge branch 'next' into for-linusDmitry Torokhov1-0/+43
2010-07-31Merge branch 'devel-stable' into develRussell King234-3489/+11814
Conflicts: arch/arm/kernel/entry-armv.S arch/arm/kernel/setup.c arch/arm/mm/init.c
2010-07-31Merge branch 'misc' into develRussell King49-295/+268
Conflicts: arch/arm/mm/init.c
2010-07-31Merge branches 'at91', 'ep93xx', 'kexec', 'iop', 'lmb', 'nomadik', 'nuc', ↵Russell King181-1223/+3456
'pl', 'spear' and 'versatile' into devel
2010-07-31Merge branch 'shmobile' into develRussell King19-38/+73
2010-07-31ARM: 6278/2: fix regression in RealView after the introduction of pclkLinus Walleij1-1/+1
The patch to add the apb_pclk to the AMBA/PrimeCell bus broke RealView, since the clockdevice is not registered at probe() time. This moves clock initialization to a core_initcall() [rmk:moved before the problematical commit to avoid bisect problems] Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-30Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds9-47/+66
* master.kernel.org:/home/rmk/linux-2.6-arm: cyber2000fb: fix console in truecolor modes cyber2000fb: fix machine hang on module load SA1111: Eliminate use after free ARM: Fix Versatile/Realview/VExpress MMC card detection sense ARM: 6279/1: highmem: fix SMP preemption bug in kmap_high_l1_vipt ARM: Add barriers to io{read,write}{8,16,32} accessors as well ARM: 6273/1: Add barriers to the I/O accessors if ARM_DMA_MEM_BUFFERABLE ARM: 6272/1: Convert L2x0 to use the IO relaxed operations ARM: 6271/1: Introduce *_relaxed() I/O accessors ARM: 6275/1: ux500: don't use writeb() in uncompress.h ARM: 6270/1: clean files in arch/arm/boot/compressed/ ARM: Fix csum_partial_copy_from_user()
2010-07-30SA1111: Eliminate use after freeJulia Lawall1-3/+2
__sa1111_remove always frees its argument, so the subsequent reference to sachip->saved_state represents a use after free. __sa1111_remove does not appear to use the saved_state field, so the patch simply frees it first. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression E,E2; @@ __sa1111_remove(E) ... ( E = E2 | * E ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-30ARM: Fix Versatile/Realview/VExpress MMC card detection senseRussell King2-2/+2
The MMC card detection sense has become really confused with negations at various levels, leading to some platforms not detecting inserted cards. Fix this by converting everything to positive logic throughout, thereby getting rid of these negations. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-30ARM: 6279/1: highmem: fix SMP preemption bug in kmap_high_l1_viptGary King1-5/+8
smp_processor_id() must not be called from a preemptible context (this is checked by CONFIG_DEBUG_PREEMPT). kmap_high_l1_vipt() was doing so. This lead to a problem where the wrong per_cpu kmap_high_l1_vipt_depth could be incremented, causing a BUG_ON(*depth <= 0); in kunmap_high_l1_vipt(). The solution is to move the call to smp_processor_id() after the call to preempt_disable(). Originally by: Andrew Howe <ahowe@nvidia.com> Signed-off-by: Gary King <gking@nvidia.com> Acked-by: Nicolas Pitre <nico.as.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-29ARM: 6277/1: mach-shmobile: Allow users to select HZ, default to 128Magnus Damm2-0/+13
Introduce SHMOBILE_TIMER_HZ for SH-Mobile. Allow users to select HZ on their system to minimize potential timer drift. Use 128 Hz as default to work well with the 32768 Hz RCLK. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-29ARM: 6276/1: mach-shmobile: remove duplicate NR_IRQS_LEGACYMagnus Damm1-1/+0
NR_IRQS_LEGACY is now defined in asm/irq.h, so drop it in mach/irqs.h. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-29Merge branch 'arm/booting' of git://git.pengutronix.de/git/ukl/linux-2.6 ↵Russell King10-79/+152
into devel-stable Conflicts: arch/arm/Kconfig
2010-07-29Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into ↵Russell King150-2893/+4570
devel-stable
2010-07-29Merge branch 'wells/lpc32xx-arch_v2' of git://git.lpclinux.com/linux-2.6-lpc ↵Russell King44-36/+4878
into devel-stable
2010-07-29ARM: Add barriers to io{read,write}{8,16,32} accessors as wellRussell King1-20/+18
The ioread/iowrite accessors also need barriers as they're used in place of readl/writel et.al. in portable drivers. Create __iormb() and __iowmb() which are conditionally defined to be barriers dependent on ARM_DMA_MEM_BUFFERABLE, and always use these macros in the accessors. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-29ARM: 6273/1: Add barriers to the I/O accessors if ARM_DMA_MEM_BUFFERABLECatalin Marinas1-0/+11
When the coherent DMA buffers are mapped as Normal Non-cacheable (ARM_DMA_MEM_BUFFERABLE enabled), buffer accesses are no longer ordered with Device memory accesses causing failures in device drivers that do not use the mandatory memory barriers before starting a DMA transfer. LKML discussions led to the conclusion that such barriers have to be added to the I/O accessors: http://thread.gmane.org/gmane.linux.kernel/683509/focus=686153 http://thread.gmane.org/gmane.linux.ide/46414 http://thread.gmane.org/gmane.linux.kernel.cross-arch/5250 This patch introduces a wmb() barrier to the write*() I/O accessors to handle the situations where Normal Non-cacheable writes are still in the processor (or L2 cache controller) write buffer before a DMA transfer command is issued. For the read*() accessors, a rmb() is introduced after the I/O to avoid speculative loads where the driver polls for a DMA transfer ready bit. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-29ARM: 6272/1: Convert L2x0 to use the IO relaxed operationsCatalin Marinas1-13/+13
This patch is in preparation for a subsequent patch which adds barriers to the I/O accessors. Since the mandatory barriers may do an L2 cache sync, this patch avoids a recursive call into l2x0_cache_sync() via the write*() accessors and wmb() and a call into l2x0_cache_sync() with the l2x0_lock held. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-29ARM: 6271/1: Introduce *_relaxed() I/O accessorsCatalin Marinas1-12/+17
This patch introduces readl*_relaxed()/write*_relaxed() as the main I/O accessors (when __mem_pci is defined). The standard read*()/write*() macros are now based on the relaxed accessors. This patch is in preparation for a subsequent patch which adds barriers to the I/O accessors. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-29ARM: 6275/1: ux500: don't use writeb() in uncompress.hRabin Vincent1-5/+5
Don't use writeb() in uncompress.h, to avoid the following build errors when the "Add barriers to the I/O accessors" series is applied. Use __raw_writeb() instead. arch/arm/boot/compressed/misc.o: In function `putc': arch/arm/mach-ux500/include/mach/uncompress.h:41: undefined reference to `outer_cache' Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-29ARM: 6274/1: add global control registers definition header file for nuc900wanzongshun1-0/+39
add global control registers definition header file for nuc900 Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-29ARM: 6270/1: clean files in arch/arm/boot/compressed/Magnus Damm1-0/+3
Update the compressed boot Makefile for ARM to remove files during clean. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-28Merge branch 'for-linus' of ↵Linus Torvalds1-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: davinci: da850/omap-l138 evm: account for DEFDCDC{2,3} being tied high regulator: tps6507x: allow driver to use DEFDCDC{2,3}_HIGH register wm8350-regulator: fix wm8350_register_regulator error handling ab3100: fix off-by-one value range checking for voltage selector
2010-07-28davinci: da850/omap-l138 evm: account for DEFDCDC{2,3} being tied highSekhar Nori1-0/+8
Per the da850/omap-l138 Beta EVM SOM schematic, the DEFDCDC2 and DEFDCDC3 lines are tied high. This leads to a 3.3V IO and 1.2V CVDD voltage. Pass the right platform data to the TPS6507x driver so it can operate on the DEFDCDC{2,3}_HIGH register to read and change voltage levels. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-28mx2_camera: Add soc_camera support for i.MX25/i.MX27Baruch Siach2-2/+48
This is the soc_camera support developed by Sascha Hauer for the i.MX27. Alan Carvalho de Assis modified the original driver to get it working on more recent kernels. I modified it further to add support for i.MX25. This driver has been tested on i.MX25 and i.MX27 based platforms. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-28arm/imx/gpio: add spinlock protectionBaruch Siach2-0/+9
The GPIO registers need protection from concurrent access for operations that are not atomic. Cc: stable@kernel.org Cc: Juergen Beisert <j.beisert@pengutronix.de> Cc: Daniel Mack <daniel@caiaq.de> Reported-by: rpkamiak@rockwellcollins.com Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-27ARM: Add support for the LPC32XX archKevin Wells2-0/+16
Add LPC32XX support in arch/arm/Kconfig and arch/arm/Makefile Signed-off-by: Kevin Wells <wellsk40@gmail.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-07-27ARM: LPC32XX: Arch config menu supoport and makefilesKevin Wells3-0/+45
Signed-off-by: Kevin Wells <wellsk40@gmail.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-07-27ARM: LPC32XX: Phytec 3250 platform supportKevin Wells1-0/+397
Platform support file for the PHY3250 mach id Signed-off-by: Kevin Wells <wellsk40@gmail.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-07-27ARM: LPC32XX: Misc support functionsKevin Wells2-0/+344
Misc support functions and prototypes used in the LPC32XX arch and platforms Signed-off-by: Kevin Wells <wellsk40@gmail.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-07-27ARM: LPC32XX: Serial support codeKevin Wells1-0/+190
Serial port setup support code Signed-off-by: Kevin Wells <wellsk40@gmail.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-07-27ARM: LPC32XX: System suspend supportKevin Wells2-0/+297
Support for system suspend and resume Signed-off-by: Kevin Wells <wellsk40@gmail.com>
2010-07-27ARM: LPC32XX: GPIO, timer, and IRQ driversKevin Wells3-0/+1060
Common drivers for the LPC32XX used on all platforms Signed-off-by: Kevin Wells <wellsk40@gmail.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-07-27ARM: LPC32XX: Clock driverKevin Wells2-0/+1175
Clock driver for the LPC32XX architecture Signed-off-by: Kevin Wells <wellsk40@gmail.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-07-27ARM: LPC32XX: Debug and IRQ macrosKevin Wells2-0/+78
Debug (printascii) and IRQ handler macros for the LPC32XX arch Signed-off-by: Kevin Wells <wellsk40@gmail.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-07-27ARM: LPC32XX: Initial arch header filesKevin Wells12-0/+1225
Header files for the LPC32xx arch Signed-off-by: Kevin Wells <wellsk40@gmail.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-07-27ARM: call machine_shutdown() from machine_halt(), etcRussell King3-9/+18
x86 calls machine_shutdown() from the various machine_*() calls which take the machine down ready for halting, restarting, etc, and uses this to bring the system safely to a point where those actions can be performed. Such actions are stopping the secondary CPUs. So, change the ARM implementation of these to reflect what x86 does. This solves kexec problems on ARM SMP platforms, where the secondary CPUs were left running across the kexec call. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: SMP: Always enable clock event broadcast supportRussell King3-3/+8
The TWD local timers are unable to wake up the CPU when it is placed into a low power mode, eg. C3. Therefore, we need to adapt things such that the TWD code can cope with this. We do this by always providing a broadcast tick function, and marking the fact that the TWD local timer will stop in low power modes. This means that when the CPU is placed into a low power mode, the core timer code marks this fact, and allows an IPI to be given to the core. Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de>
2010-07-27ARM: Factor out common code from cpu_proc_fin()Russell King26-124/+40
All implementations of cpu_proc_fin() start by disabling interrupts and then flush caches. Rather than have every processors proc_fin() implementation do this, move it out into generic code - and move the cache flush past setup_mm_for_reboot() (so it can benefit from having caches still enabled.) This allows cpu_proc_fin() to become independent of the L1/L2 cache types, and eventually move the L2 cache flushing into the L2 support code. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: 6268/1: ARMv6K and ARMv7 use fault statuses 3 and 6 as Access Flag faultKirill A. Shutemov2-2/+23
Statuses 3 (0b00011) and 6 (0x00110) of DFSR are Access Flags faults on ARMv6K and ARMv7. Let's patch fsr_info[] at runtime if we are on ARMv7 or later. Unfortunately, we don't have runtime check for 'K' extension, so we can't check for it. Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: 6256/1: Check arch version and modify fsr_info[] depends on it at runtimeKirill A. Shutemov1-5/+11
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: 6255/1: Workaround infinity loop in handling of translation faultsKirill A. Shutemov1-1/+10
On ARM one Linux PGD entry contains two hardware entries (see page tables layout in pgtable.h). We normally guarantee that we always fill both L1 entries. But create_mapping() doesn't follow the rule. It can create inidividual L1 entries, so here we have to call pmd_none() check in do_translation_fault() for the entry really corresponded to address, not for the first of pair. Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-14 03:41:35 +0000