summaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2012-05-09OMAP: 4430SDP: Use common configuration for V1V8, V2V1 suppliesPeter Ujfalusi1-1/+3
These supplies going to be needed for the twl6040 driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09OMAP4: twl-common: Add twl6030 V1V8, V2V1 SMPS common configurationPeter Ujfalusi2-0/+45
V1V8 supply from twl6030 commonly used as VIO for the machine. V2V1 is adviced to supply the twl6040, and also to feed the twl6030's VCXIO_IN, and VDAC_IN inputs. Create the common regulator configurations for these regulators: Make the V2V1 as supply_regulator for VCXIO, VDAC. Add twl6040 (1-004b) as consumer for V1V8, and V2V1. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> [tony@atomide.com: updated for the pm regulator changes] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09ARM: OMAP: Mark Beagleboard-xM MMC bus as 4-bitRuss Dill1-1/+6
On Beagleboard-xM (all revisions) only MMC1_DAT0-MMC1_DAT3 are wired up. Tested on Beagleboard-xM Rev C1 and Beagleboard Rev B4. Signed-off-by: Russ Dill <Russ.Dill@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09Add MSUB support for the LogicPD OMAP3530 DevKitsAshwin Bihari1-1/+25
Add support for the OMAP3 MUSB OTG controller to the LogicPD OMAP3530 SOM-LV[1] and Torpedo[2] DevKits [1] - www.logicpd.com/products/system-on-modules/omap35x-som-lv/ [2] - www.logicpd.com/products/system-on-modules/omap35x-torpedo-som/ Signed-off-by: Ashwin Bihari <ashwin.bihari@logicpd.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09ARM: OMAP: rx51: Platform support for lis3lv02d accelerometerAmeya Palande1-1/+87
Platform support for lis3lv02d accelerometer Signed-off-by: Ameya Palande <ameya.palande@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09ARM: OMAP2+: craneboard: register emac deviceMans Rullgard1-0/+2
This adds the required am35xx_emac_init() call to the craneboard init function. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09ARM: OMAP4: board-omap4panda: Register platform device for HDMI audio codecRicardo Neri1-0/+6
Add platform device registratation for HDMI audio codec. This is to be able to transmit audio through the HDMI output featured in Pandaboard and PandaboardES boards. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09ARM: OMAP4: board-4430sdp: Register platform device for HDMI audio codecRicardo Neri1-0/+6
Add platform device registratation for HDMI audio codec. This is to be able to transmit audio through the HDMI output featured in SDP4430 and Blaze boards. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09ARM: OMAP: devices: Register platform devices for HDMI audioRicardo Neri1-0/+31
Add platform registration for the devices HDMI audio support. The omap-hdmi-audio-dai platform device is to be used by the ASoC HDMI CPU DAI driver. The omap-hdmi-audio platform device is to be used by the ASoC HDMI machine driver that links together the ASOC CPU DAI, ASoC plaform and ASoC codec drivers. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09ARM: OMAP3: igep0020: Add support for Micron NAND Flash storage memoryJavier Martinez Canillas1-43/+31
IGEP-based boards can have two different flash memories, a OneNAND or a NAND device. The boot configuration pins (sys_boot) are used to specify which memory is available. Also, this patch removes unnecesary code for registering the OneNAND. Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com> [tony@atomide.com: fixed up a minor checkpatch warning] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09ARM: OMAP2+: nand: Make board_onenand_init() visible to board codeJavier Martinez Canillas2-2/+13
board_onenand_init() and board_nand_init() initialization functions are used to initialize OneNAND and NAND memories respectively. But only board_nand_init() was visible to be used from board code. This patch makes possible to initialize a OneNAND flash memory within platform code. Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09ARM: OMAP3: cm-t35: add support for power offIgor Grinberg1-0/+5
Enable the power off feature of the TPS65930 on-board PMIC. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09ARM: OMAP: WiLink platform data for the PandaBoardMircea Gherzan1-2/+12
The "uim" deamon requires sysfs entries that are filled in using this platform data. Signed-off-by: Mircea Gherzan <mgherzan@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09ARM: OMAP2PLUS: Enable HIGHMEMSantosh Shilimkar1-0/+1
HIGMEM support in kernel is quite mature now and we have boards like ZOOM, PANDA, SDP where 1 GB memories are installed. With HIGHMEM disabled not all of the 1GB of RAM (only ~700MB) can be accessed. Hence, enable HIGMEM to make use of the entire memory. On the boards which doesn't have more than 768 MB memory, all the memory is directly mapped in "lowmem" and highmem isn't exercised. Hence, there should be no impact by enabling HIGHMEM for boards that do not need it. Tested on OMAP4460 Panda-ES. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Jon Hunter <jon-hunter@ti.com> Tested-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09ARM: OMAP: omap2plus_defconfig: Enable ehci-omap and sms95xx supportGovindraj.R1-0/+2
Boards like beagle and panda use ehci based smsc95xx lan chips one has to manually enable these supports to get nfs working on these boards. So keep these support enable by default. Signed-off-by: Govindraj.R <govindraj.raja@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-04-30Merge branch 'for_3.4/pm/smps-regulator' of ↵Tony Lindgren3-3/+166
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into pm-regulator Conflicts: arch/arm/mach-omap2/twl-common.c
2012-04-28Merge tag 'fixes-for-linus' of ↵Linus Torvalds19-140/+207
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Nothing controversial, just another batch of fixes: - Samsung/exynos fixes for more merge window fallout: build errors and warnings mostly, but also some clock/device setup issues on exynos4/5 - PXA bug and warning fixes related to gpio and pinmux - IRQ domain conversion bugfixes for U300 and MSM - A regulator setup fix for U300" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: PXA2xx: MFP: fix potential direction bug ARM: PXA2xx: MFP: fix bug with MFP_LPM_KEEP_OUTPUT arm/sa1100: fix sa1100-rtc memory resource ARM: pxa: fix gpio wakeup setting ARM: SAMSUNG: add missing MMC_CAP2_BROKEN_VOLTAGE capability ARM: EXYNOS: Fix compilation error when CONFIG_OF is not defined ARM: EXYNOS: Fix resource on dev-dwmci.c ARM: S3C24XX: Fix build warning for S3C2410_PM ARM: mini2440_defconfig: Fix build error ARM: msm: Fix gic irqdomain support ARM: EXYNOS: Fix incorrect initialization of GIC ARM: EXYNOS: use 'exynos4-sdhci' as device name for sdhci controllers ARM: u300: bump all IRQ numbers by one ARM: ux300: Fix unimplementable regulation constraints
2012-04-27Merge branch 'v3.4-samsung-fixes-3' of ↵Olof Johansson10-39/+78
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes * 'v3.4-samsung-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: SAMSUNG: add missing MMC_CAP2_BROKEN_VOLTAGE capability ARM: EXYNOS: Fix compilation error when CONFIG_OF is not defined ARM: EXYNOS: Fix resource on dev-dwmci.c ARM: S3C24XX: Fix build warning for S3C2410_PM ARM: mini2440_defconfig: Fix build error ARM: EXYNOS: Fix incorrect initialization of GIC ARM: EXYNOS: use 'exynos4-sdhci' as device name for sdhci controllers
2012-04-27Merge branch 'fixes' of git://github.com/hzhuang1/linux into fixesOlof Johansson4-4/+32
* 'fixes' of git://github.com/hzhuang1/linux: ARM: PXA2xx: MFP: fix potential direction bug ARM: PXA2xx: MFP: fix bug with MFP_LPM_KEEP_OUTPUT arm/sa1100: fix sa1100-rtc memory resource ARM: pxa: fix gpio wakeup setting
2012-04-27ARM: PXA2xx: MFP: fix potential direction bugIgor Grinberg1-0/+9
Pins configured as input and have MFP_LPM_DRIVE_* flag set, can have a wrong output value for some period of time (spike) during the suspend sequence. This can happen because the direction of the pins (GPDR) is set by software and the output level is set by hardware (PGSR) at a later stage. Fix the above potential bug by setting the output levels first. Also save the actual levels of the pins before the suspend and restore them after the resume, but before the direction settings take place, so the same bug as described above will not happen in the resume sequence. Reported-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Tested-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-04-27ARM: PXA2xx: MFP: fix bug with MFP_LPM_KEEP_OUTPUTIgor Grinberg2-2/+17
Pins that have MFP_LPM_KEEP_OUTPUT set and are configured for output must retain the output state in low power mode. Currently, the pin direction configuration is overrided with values in gpdr_lpm[] array and do not obey the MFP_LPM_KEEP_OUTPUT setting. Fix the above bug and add some documentation to clarify the MFP_LPM_KEEP_OUTPUT setting purpose. Reported-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Tested-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-04-27arm/sa1100: fix sa1100-rtc memory resourceDmitry Artamonow1-1/+1
DEFINE_RES_MEM() takes the size of resource as a second argument, not the end address. Passing end address leads to following error in runtime during device registration: sa1100-rtc: failed to claim resource 0 Fix it. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-04-27ARM: pxa: fix gpio wakeup settingRobert Jarzmik1-1/+5
In 3.3, gpio wakeup setting was broken. The call enable_irq_wake() didn't set up the PXA gpio registers (PWER, ...) anymore. Fix it at least for pxa27x. The driver doesn't seem to be used in pxa25x (weird ...), and the fix doesn't extend to pxa3xx and pxa95x (which don't have a gpio_set_wake() available). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-04-26Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds1-1/+1
Merge fixes from Andrew Morton: "13 fixes. The acerhdf patches aren't (really) fixes. But they've been stuck in my tree for up to two years, sent to Matthew multiple times and the developers are unhappy." * emailed from Andrew Morton <akpm@linux-foundation.org>: (13 patches) mm: fix NULL ptr dereference in move_pages mm: fix NULL ptr dereference in migrate_pages revert "proc: clear_refs: do not clear reserved pages" drivers/rtc/rtc-ds1307.c: fix BUG shown with lock debugging enabled arch/arm/mach-ux500/mbox-db5500.c: world-writable sysfs fifo file hugetlbfs: lockdep annotate root inode properly acerhdf: lowered default temp fanon/fanoff values acerhdf: add support for new hardware acerhdf: add support for Aspire 1410 BIOS v1.3314 fs/buffer.c: remove BUG() in possible but rare condition mm: fix up the vmscan stat in vmstat epoll: clear the tfile_check_list on -ELOOP mm/hugetlb: fix warning in alloc_huge_page/dequeue_huge_page_vma
2012-04-25Merge branch 'u300-fixes-for-arm-soc' of ↵Olof Johansson3-85/+80
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into fixes * 'u300-fixes-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: u300: bump all IRQ numbers by one ARM: ux300: Fix unimplementable regulation constraints
2012-04-25arch/arm/mach-ux500/mbox-db5500.c: world-writable sysfs fifo fileVasiliy Kulikov1-1/+1
Don't allow everybody to use a modem. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-25Merge branch 'msm-fix' of ↵Olof Johansson2-12/+17
git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm into fixes * 'msm-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm: ARM: msm: Fix gic irqdomain support
2012-04-24ARM: SAMSUNG: add missing MMC_CAP2_BROKEN_VOLTAGE capabilityMarek Szyprowski3-0/+4
Commit 6e8201f57c935 "mmc: core: add the capability for broken voltage" introduced a new quirk to indicate that MMC core should ignore voltage change errors reported by the regulators core. This is required to get SDHCI working on UniversalC210, NURI and GONI boards again after commit ceb6143b2df81c ("mmc: sdhci: fix vmmc handling"). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-04-24ARM: EXYNOS: Fix compilation error when CONFIG_OF is not definedTushar Behera1-0/+2
Fixed following compile time error. arch/arm/mach-exynos/common.c: In function 'exynos5_init_irq': arch/arm/mach-exynos/common.c:539:2: error: implicit declaration of function 'of_irq_init' arch/arm/mach-exynos/common.c:539:14: error: 'exynos4_dt_irq_match' undeclared (first use in this function) arch/arm/mach-exynos/common.c:539:14: note: each undeclared identifier is reported only once for each function it appears in Cc: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-04-24ARM: EXYNOS: Fix resource on dev-dwmci.cKukjin Kim1-10/+3
Should be EXYNOS4_IRQ_DWMCI instead of IRQ_DWMCI, and use DEFINE_RES_{MEM,IRQ}. Reported-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-04-24ARM: S3C24XX: Fix build warning for S3C2410_PMKukjin Kim1-4/+4
warning: (CPU_S3C2440 && CPU_S3C2442) selects S3C2410_PM which has unmet direct dependencies (ARCH_S3C24XX && CPU_S3C2410) warning: (CPU_S3C2440 && CPU_S3C2442) selects S3C2410_PM which has unmet direct dependencies (ARCH_S3C24XX && CPU_S3C2410) Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-04-24ARM: mini2440_defconfig: Fix build errorArnd Bergmann1-0/+2
This is needed to fix mini2440_defconfig after the platform files have been moved around. arm-none-linux-gnueabi-ld: no machine record defined arm-none-linux-gnueabi-ld: no machine record defined arm-none-linux-gnueabi-ld: no machine record defined make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-04-23ARM: msm: Fix gic irqdomain supportDavid Brown2-12/+17
As of commit 75294957be1dee7d22dd7d90bd31334ba410e836 Author: Grant Likely <grant.likely@secretlab.ca> Date: Tue Feb 14 14:06:57 2012 -0700 irq_domain: Remove 'new' irq_domain in favour of the ppc one the ARM gic controller uses proper irq domains. Fix the MSM gic initialization and DT so that it works again. Signed-off-by: David Brown <davidb@codeaurora.org> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2012-04-22Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds1-5/+1
Pull ARM fixes from Russell King: "Here's my usual Sunday push, just for one revert which PeterZ hollered about after last weeks push. Other than that, all seems strangely quiet as far as fixes go in non-platform ARM land at the moment." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: Revert "ARM: 7359/2: smp_twd: Only wait for reprogramming on active cpus"
2012-04-21Merge tag 'fixes-for-linus' of ↵Linus Torvalds24-147/+67
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull "ARM: SoC fixes" from Olof Johansson: * at91, ux500, imx, omap and bcmring: - at91 fixes for =m driver build issues, irqdomain fixes and config dependency fixes - ux500 kconfig dependency fixes and a smp wakeup bugfix - imx idle bugfix and build fix due to irq domain changes - omap uart pinmux fixes, softreset regression revert and misc fixes - bcmring build error regression fix * ux500 and imx had some small defconfig updates in this branch * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits) ARM: bcmring: fix UART declarations ARM: imx: Fix imx5 idle logic bug ARM: imx27-dt: Fix build due to removal of irq_domain_add_simple() ARM: imx_v4_v5_defconfig: Add support for CONFIG_REGULATOR_FIXED_VOLTAGE ARM: OMAP1: DMTIMER: fix broken timer clock source selection ARM: OMAP: serial: Fix the ocp smart idlemode handling bug ARM: OMAP2+: UART: Fix incorrect population of default uart pads ARM: OMAP: sram: fix BUG in dpll code for !PM case dmaengine: Kconfig: fix Atmel at_hdmac entry USB: gadget/at91_udc: add gpio_to_irq() function to vbus interrupt USB: ohci-at91: change annotations for probe/remove functions leds-atmel-pwm.c: Make pwmled_probe() __devinit ARM: at91: fix at91sam9261ek Ethernet dm9000 irq ARM: at91: fix rm9200ek flash size ARM: at91: remove empty at91_init_serial function ARM: at91: fix typo in at91_pmc_base assembly declaration ARM: at91: Export at91_matrix_base ARM: at91: Export at91_pmc_base ARM: at91: Export at91_ramc_base ARM: at91: Export at91_st_base ...
2012-04-20ARM: EXYNOS: Fix incorrect initialization of GICThomas Abraham1-1/+1
Use the of_irq_init() call to setup the gic which also properly registers the gic device node pointer with gic irq domain, without which all interrupt specifier translations for gic fail. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-04-20ARM: EXYNOS: use 'exynos4-sdhci' as device name for sdhci controllersThomas Abraham4-24/+62
With the addition of platform specific driver data in the sdhci driver for EXYNOS4 and EXYNOS5, the device name of sdhci controllers on EXYNOS4 and EXYNOS5 are changed accordingly. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> [kgene.kim@samsung.com: re-worked on top of v3.4-rc2] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-04-20ARM: u300: bump all IRQ numbers by oneLinus Walleij2-77/+79
Since the VIC was converted to use generic IRQ domains IRQ 0 is silently ignored. This IRQ is used on the U300 so we're missing it now. Bump all IRQ numbers by one since they are now decoupled from the hardware IRQ numbers. Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-20ARM: ux300: Fix unimplementable regulation constraintsMark Brown1-8/+1
It doesn't make sense to grant permission to change the status of a regulator that is also set as always on and similarly it doesn't make sense to allow a driver to change the voltage of a regulator which can only be set to a single voltage. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-19Revert "ARM: 7359/2: smp_twd: Only wait for reprogramming on active cpus"Russell King1-5/+1
This reverts commit 9f85550347f51c79a917b2aec04c90691c11e20a. Peter Zijlstra says: | Argh, how did that ever make it upstream, please drop. | | Russell, please make that go away upstream. | | Like I said, this is both completely the wrong way to solve, and you're | so not paying attention, see: | | 5fbd036b552f633abb394a319f7c62a5c86a9cd7 | 2baab4e90495ebc9826c93f79d74d6e60a828d24 | e3831edd59edf57ca11fc289f08961b20baf5146 | | What's even worse: | | git describe --contains 9f85550347f51c79a917b2aec04c90691c11e20a --match "v*" | v3.4-rc3~1^2~3 | | that nonsense got merged long after those other commits. Linus Walleij says: | My bad, was because the initial patch was submitted march 9th before | these fixes were merged: | http://marc.info/?l=linux-arm-kernel&m=133159655513844&w=2 | | It was pending for a while in Russell's patch tracker and I | rebased it to -rc2 without paying enough attention to recent | related scheduler fixes ... lesson learned. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-04-18Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixesOlof Johansson7-5/+10
Here is another fixes series for AT91 designed for 3.4-rc. We experienced some issues while compiling some drivers as modules: Joachim has corrected several of them. We may reduce this number of exported values by reworking some drivers, in the future. Some drivers are also modified here, I would like to keep them in the series as the modifications are really related with our recent move to irqdomains or simply related with compiler annotations. I keep dmaengine Kconfig modification in this "fixes" series. The DMA driver will not be available for 9x5 SoC family otherwise. * tag 'at91-fixes' of git://github.com/at91linux/linux-at91: dmaengine: Kconfig: fix Atmel at_hdmac entry USB: gadget/at91_udc: add gpio_to_irq() function to vbus interrupt USB: ohci-at91: change annotations for probe/remove functions leds-atmel-pwm.c: Make pwmled_probe() __devinit ARM: at91: fix at91sam9261ek Ethernet dm9000 irq ARM: at91: fix rm9200ek flash size ARM: at91: remove empty at91_init_serial function ARM: at91: fix typo in at91_pmc_base assembly declaration ARM: at91: Export at91_matrix_base ARM: at91: Export at91_pmc_base ARM: at91: Export at91_ramc_base ARM: at91: Export at91_st_base
2012-04-18Merge branch 'fixes-for-arm-soc-20120416' of ↵Olof Johansson3-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into fixes * 'fixes-for-arm-soc-20120416' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: ux500: update defconfig ARM: ux500: Fix unmet direct dependency ARM: ux500: wake secondary cpu via resched
2012-04-18Merge tag 'v3.4-rc3-imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6 ↵Olof Johansson3-3/+6
into fixes ARM i.MX misc fixes for -rc * tag 'v3.4-rc3-imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6: ARM: imx: Fix imx5 idle logic bug ARM: imx27-dt: Fix build due to removal of irq_domain_add_simple() ARM: imx_v4_v5_defconfig: Add support for CONFIG_REGULATOR_FIXED_VOLTAGE
2012-04-18Merge tag 'omap-fixes-for-v3.4-rc3' of ↵Olof Johansson10-131/+43
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fix regression for bad uart muxing and oops when PM is not set. Revert one softreset regression and few other minor fixes. * tag 'omap-fixes-for-v3.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP1: DMTIMER: fix broken timer clock source selection ARM: OMAP: serial: Fix the ocp smart idlemode handling bug ARM: OMAP2+: UART: Fix incorrect population of default uart pads ARM: OMAP: sram: fix BUG in dpll code for !PM case ARM: OMAP2/3: VENC hwmods: Remove OCPIF_SWSUP_IDLE flag from VENC slave interface ARM: OMAP2+: hwmod: Revert "ARM: OMAP2+: hwmod: Make omap_hwmod_softreset wait for reset status" ARM: OMAP2+: hwmod: add softreset delay field and OMAP4 data ARM: OMAP1: mux: add missing include
2012-04-18ARM: bcmring: fix UART declarationsPaul Gortmaker1-2/+2
This error appeared in the bcmring_defconfig build: CC arch/arm/mach-bcmring/core.o arch/arm/mach-bcmring/core.c:55: error: macro "AMBA_APB_DEVICE" requires 6 arguments, but only 5 given arch/arm/mach-bcmring/core.c:55: warning: type defaults to 'int' in declaration of 'AMBA_APB_DEVICE' arch/arm/mach-bcmring/core.c:56: error: macro "AMBA_APB_DEVICE" requires 6 arguments, but only 5 given arch/arm/mach-bcmring/core.c:56: warning: type defaults to 'int' in declaration of 'AMBA_APB_DEVICE' arch/arm/mach-bcmring/core.c:134: error: 'uartA_device' undeclared here (not in a function) arch/arm/mach-bcmring/core.c:135: error: 'uartB_device' undeclared here (not in a function) make[2]: *** [arch/arm/mach-bcmring/core.o] Error 1 It appeared as of commit 8ede1ae65e61282cddba39bde4142be3885a6f5a "ARM: amba: bcmring: use common amba device initializers" Note that in include/linux/amba/bus.h we have: #define AMBA_APB_DEVICE(name, busid, id, base, irqs, data) ... There is an a --> A case error in the busid and a missing zero placeholder for the id field. Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> [olof: reworded patch subject] Signed-off-by: Olof Johansson <olof@lixom.net>
2012-04-18ARM: imx: Fix imx5 idle logic bugRobert Lee1-1/+1
The imx5_idle() check of the tzic_eanble_wake() return value uses incorrect (inverted) logic causing all attempt to idle to fail. Signed-off-by: Robert Lee <rob.lee@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-18ARM: imx27-dt: Fix build due to removal of irq_domain_add_simple()Fabio Estevam1-2/+4
commit 6b783f7c (irq_domain: Remove irq_domain_add_simple() replaced irq_domain_add_simple with irq_domain_add_legacy() Implement this conversion so that imx27-dt can be built again. Reported-by: Chris Ball <cjb@laptop.org> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-18ARM: imx_v4_v5_defconfig: Add support for CONFIG_REGULATOR_FIXED_VOLTAGEFabio Estevam1-0/+1
Add support for CONFIG_REGULATOR_FIXED_VOLTAGE. Without this option the mx27_3ds cannot have the external Ethernet functional due to the need of smsc regulators. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-17ARM: OMAP1: DMTIMER: fix broken timer clock source selectionPaul Walmsley1-2/+2
DMTIMER source selection on OMAP1 is broken. omap1_dm_timer_set_src() tries to use __raw_{read,write}l() to read from and write to physical addresses, but those functions take virtual addresses. sparse caught this: arch/arm/mach-omap1/timer.c:50:13: warning: incorrect type in argument 1 (different base types) arch/arm/mach-omap1/timer.c:50:13: expected void const volatile [noderef] <asn:2>*<noident> arch/arm/mach-omap1/timer.c:50:13: got unsigned int arch/arm/mach-omap1/timer.c:52:9: warning: incorrect type in argument 1 (different base types) arch/arm/mach-omap1/timer.c:52:9: expected void const volatile [noderef] <asn:2>*<noident> arch/arm/mach-omap1/timer.c:52:9: got unsigned int Fix by using omap_{read,writel}(), just like the other users of the MOD_CONF_CTRL_1 register in the OMAP1 codebase. Of course, in the long term, removing omap_{read,write}l() is the appropriate thing to do; but this will take some work to do this cleanly. Looks like this was caused by 97933d6 (ARM: OMAP1: dmtimer: conversion to platform devices) that dangerously moved code and changed it in the same patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tarun Kanti DebBarma <tarun.kanti@ti.com> Cc: stable@vger.kernel.org [tony@atomide.com: updated comments to include the breaking commit] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-04-17ARM: OMAP: serial: Fix the ocp smart idlemode handling bugSantosh Shilimkar1-1/+7
The current serial UART code, while fidling with ocp idlemode bits, forget about the smart idle wakeup bit even if it is supported by UART IP block. This will lead to missing the module wakeup on OMAP's where the smart idle wakeup is supported. This was the root cause of the console sluggishness issue, I have been observing on OMAP4 devices and also can be potential reason for some other UART wakeup issues. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Kevin Hilman <khilman@ti.com> Acked-by: Govindraj.R <govindraj.raja@ti.com> Reviewed-by: Paul Walmsley <paul@pwsan.com> Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-02-06 10:36:00 +0000