summaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2012-02-21ARM: make entry-macro.S depend on !MULTI_IRQ_HANDLERRob Herring1-1/+2
With the removal of disable_fiq on rpc and addition MULTI_IRQ_HANDLER, entry-macro.S is no longer needed for platforms that select MULTI_IRQ_HANDLER and the include of it can be conditional. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
2012-02-21ARM: rpc: make default fiq handler run-time installedRob Herring3-1/+23
Only rpc uses disable_fiq macro. Change it to a run-time installed default FIQ handler. The handler is installed before FIQ is enabled so the behavior should be unchanged. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Nicolas Pitre <nico@linaro.org>
2012-02-21ARM: make arch_ret_to_user macro optionalRob Herring2-1/+13
Only 3 platforms need arch_ret_to_user macro, so add ARCH_HAS_RET_TO_USER kconfig option and make iop13xx, iop32x and iop33x select it. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Nicolas Pitre <nico@linaro.org>
2012-02-07Merge tag 'fbdev-fixes-for-3.3-1' of git://github.com/schandinat/linux-2.6Linus Torvalds3-12/+28
fbdev fixes for 3.3 It includes: - compile fix for fsl-diu-fb - fix for a suspend/resume issue in atmel_lcdfb - fix for a suspend/resume issue in OMAP - workaround for a hardware bug to avoid physical damage in OMAP - really trivial dead code removal in intelfb * tag 'fbdev-fixes-for-3.3-1' of git://github.com/schandinat/linux-2.6: atmel_lcdfb: fix usage of CONTRAST_CTR in suspend/resume intelfb: remove some dead code drivers/video: compile fixes for fsl-diu-fb.c OMAPDSS: HDMI: PHY burnout fix OMAP: 4430SDP/Panda: add HDMI HPD gpio OMAP: 4430SDP/Panda: setup HDMI GPIO muxes OMAPDSS: remove wrong HDMI HPD muxing OMAP: 4430SDP/Panda: rename HPD GPIO to CT_CP_HPD OMAP: 4430SDP/Panda: use gpio_free_array to free HDMI gpios OMAPDSS: use sync versions of pm_runtime_put
2012-02-04Merge tag 'fixes-for-linus' of ↵Linus Torvalds23-1093/+105
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc arm-soc fixes for 3.3-rc * A series of OMAP regression fixes for merge window fallout * Two patches for Davinci, one removes some misdefined clocks, the other is a regression fix for merge window fallout * Two patches that makes Broadcom bcmring build again (and removes a bunch of unused code in the process) * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: bcmring: fix build failure in mach-bcmring/arch.c ARM: bcmring: remove unused DMA map code ARM: davinci: update mdio bus name ARM: OMAP2+: arch/arm/mach-omap2/smartreflex.c: add missing iounmap ARM: OMAP2+: arch/arm/mach-omap2/devices.c: introduce missing kfree ARM: OMAP: fix MMC2 loopback clock handling ARM: OMAP: fix erroneous mmc2 clock change on mmc3 setup ARM: OMAP2+: GPMC: fix device size setup ARM: OMAP2+: timer: Fix crash due to wrong arg to __omap_dm_timer_read_counter ARM: OMAP3: hwmod data: register dss hwmods after dss_core ARM: OMAP2/3: PRM: fix missing plat/irqs.h build breakage ARM: OMAP2+: io: fix compilation breakage on 2420-only configs ARM: OMAP4: hwmod data: Add names for DMIC memory address space ARM: OMAP3: hwmod data: add SYSC_HAS_ENAWAKEUP for dispc ARM: OMAP2+: hwmod data: split omap2/3 dispc hwmod class ARM: davinci: DA850: remove non-existing pll1_sysclk4-7 clocks ARM: OMAP2: fix regulator warnings ARM: OMAP2: fix omap3 touchbook kconfig warning i2c: OMAP: Fix OMAP1 build error
2012-02-04ARM: bcmring: fix build failure in mach-bcmring/arch.cPaul Gortmaker1-1/+1
Upstream commit d1fce9c115eeb93e01c01732dfe9a86cf76009cf "ARM: restart: bcmring: use new restart hook" breaks building of this platform, since what used to be the last field of the MACHINE_START/END block didn't have a trailing comma. Once another field was added below, we get: arch/arm/mach-bcmring/arch.c:198: error: request for member 'restart' in something not a structure or union Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Jiandong Zheng <jdzheng@broadcom.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-02-04ARM: bcmring: remove unused DMA map codeJD Zheng2-1008/+0
Remove BCMRING DMA map code which is no longer used. This also fixes a build error with dma.c introduced by bfcd2ea6a40b33270564d706396f1b514a988d3c. Signed-off-by: Jiandong Zheng <jdzheng@broadcom.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-02-04Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-0/+2
* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: i.MX SDMA: Fix burstsize settings ARM: mach-shmobile: both USB DMAC instances on sh7372 are slave-only dma: sh_dma: not all SH DMAC implementations support MEMCPY at_hdmac: bugfix for enabling channel irq dmaengine: fix missing 'cnt' in ?: in dmatest
2012-02-03Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds6-10/+46
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7314/1: kuser: consistently use usr_ret for returning from helpers ARM: 7302/1: Add TLB flushing for both entries in a PMD ARM: 7303/1: perf: add empty NODE event definitions for Cortex-A5 and Cortex-A15 ARM: 7308/1: vfp: flush thread hwstate before copying ptrace registers ARM: 7307/1: vfp: fix ptrace regset modification race ARM: 7306/1: vfp: flush thread hwstate before restoring context from sigframe Revert "ARM: 7304/1: ioremap: fix boundary check when reusing static mapping"
2012-02-03ARM: 7314/1: kuser: consistently use usr_ret for returning from helpersWill Deacon1-1/+1
__kuser_cmpxchg64 has a return path using bx lr to get back to the caller. This is actually ok since the code in question is predicated on CONFIG_CPU_32v6K, but for the sake of consistency using the usr_ret macro is probably better. Acked-by: Dave Martin <dave.martin@linaro.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-02ARM: 7302/1: Add TLB flushing for both entries in a PMDCatalin Marinas1-1/+9
Linux uses two PMD entries for a PTE with the classic page table format, covering 2MB range. However, the __pte_free_tlb() function only adds a single TLB flush corresponding to 1MB range covering 'addr'. On Cortex-A15, level 1 entries can be cached by the TLB independently of the level 2 entries and without additional flushing a PMD entry would be left pointing at the wrong PTE. The patch limits the TLB flushing range to two 4KB pages around the 1MB boundary within PMD. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-02ARM: 7303/1: perf: add empty NODE event definitions for Cortex-A5 and Cortex-A15Will Deacon1-0/+28
Commit 89d6c0b5 ("perf, arch: Add generic NODE cache events") added empty NODE event definitions for the ARM PMU implementations. This was merged along with Cortex-A5 and Cortex-A15 PMU support, so they missed out on the original patch. This patch adds the empty definitions to Cortex-A5 and Cortex-A15. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-02ARM: 7308/1: vfp: flush thread hwstate before copying ptrace registersWill Deacon1-1/+1
If we are context switched whilst copying into a thread's vfp_hard_struct then the partial copy may be corrupted by the VFP context switching code (see "ARM: vfp: flush thread hwstate before restoring context from sigframe"). This patch updates the ptrace VFP set code so that the thread state is flushed before the copy, therefore disabling VFP and preventing corruption from occurring. Cc: stable <stable@vger.kernel.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-02ARM: 7307/1: vfp: fix ptrace regset modification raceDave Martin1-2/+4
In a preemptible kernel, vfp_set() can be preempted, causing the hardware VFP context to be switched while the thread vfp state is being read and modified. This leads to a race condition which can cause the thread vfp state to become corrupted if lazy VFP context save occurs due to preemption in between the time thread->vfpstate is read and the time the modified state is written back. This may occur if preemption occurs during the execution of a ptrace() call which modifies the VFP register state of a thread. Such instances should be very rare in most realistic scenarios -- none has been reported, so far as I am aware. Only uniprocessor systems should be affected, since VFP context save is not currently lazy in SMP kernels. The problem was introduced by my earlier patch migrating to use regsets to implement ptrace. This patch does a vfp_sync_hwstate() before reading thread->vfpstate, to make sure that the thread's VFP state is not live in the hardware registers while the registers are modified. Thanks to Will Deacon for spotting this. Cc: stable <stable@vger.kernel.org> Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-02ARM: 7306/1: vfp: flush thread hwstate before restoring context from sigframeWill Deacon1-3/+2
Following execution of a signal handler, we currently restore the VFP context from the ucontext in the signal frame. This involves copying from the user stack into the current thread's vfp_hard_struct and then flushing the new data out to the hardware registers. This is problematic when using a preemptible kernel because we could be context switched whilst updating the vfp_hard_struct. If the current thread has made use of VFP since the last context switch, the VFP notifier will copy from the hardware registers into the vfp_hard_struct, overwriting any data that had been partially copied by the signal code. Disabling preemption across copy_from_user calls is a terrible idea, so instead we move the VFP thread flush *before* we update the vfp_hard_struct. Since the flushing is performed lazily, this has the effect of disabling VFP and clearing the CPU's VFP state pointer, therefore preventing the thread from being updated with stale data on the next context switch. Cc: stable <stable@vger.kernel.org> Tested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-02Revert "ARM: 7304/1: ioremap: fix boundary check when reusing static mapping"Russell King1-2/+1
This reverts commit 3c424f359898aff48c3d5bed608ac706f8a528c3. Joachim Eastwood reports: | "ARM: 7304/1: ioremap: fix boundary check when reusing static mapping" | Commit: 3c424f359898aff48c3d5bed608ac706f8a528c3 in Linus master | | Breaks booting on my custom AT91RM9200 board. | There isn't any error messages or anything that indicates what goes | wrong it just stops after; Uncompressing Linux... done, booting the | kernel. | | Reverting it makes my board boot again. and further debugging reveals: ioremap: pfn=fffff phys=fffff000 offset=400 size=1000 ioremap: area c3ffdfc0: phys_addr=200000 pfn=200 size=4000 ioremap: found: addr fef74000 => fed73000 => fed73400 Clearly, an area for pfn 0x200, 16K can't ever satisfy a request for pfn 0xfffff. This happens because the changed if statement becomes: if (0x00200 > 0xfffff || 0xfffff000 + 0x400 + 0x1000-1 > 0x00200000 + 0x4000-1) and therefore: if (0x00200 > 0xfffff || 0x000003ff > 0x00203fff) The if condition fails, and so we _believe_ that the SRAM mapping fits our request. Clearly that's totally bogus. Moreover, the original premise of the 'fix' patch was wrong: | The condition checking boundaries of the requested and existing | mappings didn't take in-page offset into consideration though, | which lead to obscure and hard to debug problems when requested | mapping crossed end of the static one. as the code immediately above this loop does: size = PAGE_ALIGN(offset + size); so 'size' already contains the requested offset into the page. So, revert the broken 'fix'. Acked-by: Nicolas Pitre <nico@linaro.org>
2012-02-01ARM: mach-shmobile: both USB DMAC instances on sh7372 are slave-onlyGuennadi Liakhovetski1-0/+2
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-01-29Merge branch 'fixes' of ↵Olof Johansson12-45/+97
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: arch/arm/mach-omap2/smartreflex.c: add missing iounmap ARM: OMAP2+: arch/arm/mach-omap2/devices.c: introduce missing kfree ARM: OMAP: fix MMC2 loopback clock handling ARM: OMAP: fix erroneous mmc2 clock change on mmc3 setup ARM: OMAP2+: GPMC: fix device size setup ARM: OMAP2+: timer: Fix crash due to wrong arg to __omap_dm_timer_read_counter ARM: OMAP3: hwmod data: register dss hwmods after dss_core ARM: OMAP2/3: PRM: fix missing plat/irqs.h build breakage ARM: OMAP2+: io: fix compilation breakage on 2420-only configs ARM: OMAP4: hwmod data: Add names for DMIC memory address space ARM: OMAP3: hwmod data: add SYSC_HAS_ENAWAKEUP for dispc ARM: OMAP2+: hwmod data: split omap2/3 dispc hwmod class ARM: OMAP2: fix regulator warnings ARM: OMAP2: fix omap3 touchbook kconfig warning i2c: OMAP: Fix OMAP1 build error
2012-01-29Merge branch 'fixes' of git://gitorious.org/linux-davinci/linux-davinci into ↵Olof Johansson8-39/+7
fixes * 'fixes' of git://gitorious.org/linux-davinci/linux-davinci: ARM: davinci: update mdio bus name ARM: davinci: DA850: remove non-existing pll1_sysclk4-7 clocks
2012-01-28Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds58-378/+208
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm: (31 commits) ARM: 7304/1: ioremap: fix boundary check when reusing static mapping ARM: 7301/1: Rename the T() macro to TUSER() to avoid namespace conflicts ARM: 7299/1: ftrace: clear zero bit in reported IPs for Thumb-2 ARM: 7298/1: realview: fix mapping of MPCore private memory region PCMCIA: fix sa1111 oops on remove ARM: 7288/1: mach-sa1100: add missing module_init() call ARM: 7297/1: smp_twd: make sure timer is stopped before registering it ARM: 7296/1: proc-v7.S: remove HARVARD_CACHE preprocessor guards ARM: 7295/1: cortex-a7: move proc_info out of !CONFIG_ARM_LPAE block ARM: 7293/1: logical_cpu_map: decouple CPU mapping from SMP ARM: 7291/1: cache: assume 64-byte L1 cachelines for ARMv7 CPUs ARM: 7290/1: vmlinux.lds.S: align the exception fixup table to a 4-byte boundary ARM: 7289/1: vmlinux.lds.S: do not hardcode cacheline size as 32 bytes MFD: ucb1x00-ts: fix resume failure MFD: ucb1x00-core: fix gpiolib direction_output handling MFD: ucb1x00-core: fix missing restore of io output data on resume MFD: mcp-core: fix mcp_priv() to be more type safe MFD: mcp-core: fix complaints from the genirq layer Revert "ARM: sa11x0: Implement autoloading of codec and codec pdata for mcp bus." Revert "ARM: sa1100: Refactor mcp-sa11x0 to use platform resources." ... Fix up conflict due to arch/arm/mach-mx5/Kconfig having been merged into mach-imx5 (commit 784a90c0a7d8: "ARM i.MX: Merge i.MX5 support into mach-imx"), but the ARM_L1_CACHE_SHIFT_6 entry was moved to be driven by the CPU_V7 logic from it in the old location in rmk's branch (commit a092f2b15399: "ARM: 7291/1: cache: assume 64-byte L1 cachelines for ARMv7 CPUs").
2012-01-28Merge tag 'fixes-for-linus' of ↵Linus Torvalds32-216/+163
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc arm-soc fixes for 3.3-rc: AT91 needed reset fixes which resulted in some minor code refactoring, it also adds a feature-removal for one of their platforms for 3.4. The USB patches have been acked by Greg K-H. i.MX and ux500 both have some minor fixes, nothing controversial. * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arch/arm/mach-imx/mach-mx53_ard.c: add missing iounmap ARM: imx: iomux-v1.h: Fix build error due to __init annotation ARM: at91: Fix at91sam9g45 and at91cap9 reset ARM: at91: make rstc soc independent ARM: at91: introduce AT91_SAM9_ALT_RESET to select the at91sam9 alternative reset ARM: at91: merge at91cap9_ddrsdr.h in at91sam9_ddrsdr.h ARM: at91: fix cap9 ddrsdr register ARM/USB: at91/ohci-at91: rename vbus_pin_inverted to vbus_pin_active_low USB: at91: fix clk_get error handling ARM: at91: removal of CAP9 SoC family ARM: at91: fix at91rm9200 soc subtype handling mach-ux500: no MMC_CAP_SD_HIGHSPEED on Snowball mach-ux500: enable ARM errata 764369 mach-ux500: do not override outer.inv_all mach-ux500: musb: now musb is always in OTG mode ARM: imx6: add missing twd_clk for imx6q clock
2012-01-27ARM: 7304/1: ioremap: fix boundary check when reusing static mappingPawel Moll1-1/+2
Since commit 576d2f2525612ecb5af029a76f21f22a3b82563d "ARM: add generic ioremap optimization by reusing static mappings" ioremap() is trying to reuse existing static mapping when possible. The condition checking boundaries of the requested and existing mappings didn't take in-page offset into consideration though, which lead to obscure and hard to debug problems when requested mapping crossed end of the static one. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-27ARM: davinci: update mdio bus nameSekhar Nori7-7/+7
Commit 5a05a8200a4359ef2bfe9094c137dee35cfdd516 ("davinci_emac: use an unique MDIO bus name") introduced during the v3.3 merge window updated the davinci mdio bus name to make it unique. Update the bus name in board files which use DaVinci MDIO bus to match the new name. Without this PHY is not detected with error like: PHY 0:01 not found net eth0: could not connect to phy 0:01 Tested on DM365 and DA850 EVMs. Cc: Florian Fainelli <florian@openwrt.org> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-01-26Merge branch 'imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6 into ↵Olof Johansson2-2/+4
fixes * 'imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6: arch/arm/mach-imx/mach-mx53_ard.c: add missing iounmap ARM: imx: iomux-v1.h: Fix build error due to __init annotation
2012-01-26Merge branch 'fixes-for-arm-soc' of ↵Olof Johansson4-47/+10
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into fixes * 'fixes-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: mach-ux500: no MMC_CAP_SD_HIGHSPEED on Snowball mach-ux500: enable ARM errata 764369 mach-ux500: do not override outer.inv_all mach-ux500: musb: now musb is always in OTG mode
2012-01-26Merge branch 'imx6/fixes' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Olof Johansson1-0/+11
into fixes * 'imx6/fixes' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: imx6: add missing twd_clk for imx6q clock
2012-01-26Merge branch 'omap_fixes_a_3.3rc' of git://git.pwsan.com/linux-2.6 into fixesTony Lindgren6-29/+75
2012-01-26ARM: OMAP2+: arch/arm/mach-omap2/smartreflex.c: add missing iounmapJulia Lawall1-1/+1
Add missing iounmap in error handling code, in a case where the function already preforms iounmap on some other execution path. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e; statement S,S1; int ret; @@ e = \(ioremap\|ioremap_nocache\)(...) ... when != iounmap(e) if (<+...e...+>) S ... when any when != iounmap(e) *if (...) { ... when != iounmap(e) return ...; } ... when any iounmap(e); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-01-26ARM: OMAP2+: arch/arm/mach-omap2/devices.c: introduce missing kfreeJulia Lawall1-0/+1
pdata needs to be freed before leaving the function in an error case. A simplified version of the semantic match that finds the problem is as follows: (http://coccinelle.lip6.fr) // <smpl> @r exists@ local idexpression x; statement S; identifier f1; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } x->f1 ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-01-26ARM: OMAP: fix MMC2 loopback clock handlingGrazvydas Ignotas1-4/+5
Currently MMC2 setup code can only enable loopback clock and relies on reset value for boards that need to have it disabled. This causes a problem with certain bootloaders that always enable that clock, resulting with unwanted bootloader dependencies. Fix this by making it disable the clock if board data says so. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-01-26ARM: OMAP: fix erroneous mmc2 clock change on mmc3 setupGrazvydas Ignotas1-4/+3
hsmmc23_before_set_reg() can set MMCSDIO2ADPCLKISEL bit, which enables internal clock for MMC2. Currently this function is also called by code handling MMC3, and if .internal_clock is set in platform data (by default it currently is), it will set MMCSDIO2ADPCLKISEL for MMC2 instead of MMC3 (MMC3 doesn't have such bit so nothing actually needs to be done). This breaks 2nd SD slot on pandora. Fix this by changing hsmmc23_before_set_reg() to only handle MMC2. Note that this removes .remux() call for MMC3, but no board currently needs it and it's also not called for MMC4 and MMC5. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-01-26ARM: OMAP2+: GPMC: fix device size setupYegor Yefremov1-0/+6
following statement can only change device size from 8-bit(0) to 16-bit(1), but not vice versa: regval |= GPMC_CONFIG1_DEVICESIZE(wval); so as this field has 1 reserved bit, that could be used in future, just clear both bits and then OR with the desired value Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-01-26ARM: OMAP2+: timer: Fix crash due to wrong arg to __omap_dm_timer_read_counterVaibhav Hiremath1-1/+1
Commit 2f0778af (ARM: 7205/2: sched_clock: allow sched_clock to be selected at runtime) had a typo for the case when CONFIG_OMAP_32K_TIMER is not set. In dmtimer_read_sched_clock(), wrong argument was getting passed to __omap_dm_timer_read_counter() function call; instead of "&clksrc", we were passing "clksrc.io_base", which results into kernel crash. To reproduce kernel crash, just disable the CONFIG_OMAP_32K_TIMER config option (and DEBUG_LL) and build/boot the kernel. This will use dmtimer as a kernel clocksource and lead to kernel crash during boot - [ 0.000000] OMAP clocksource: GPTIMER2 at 26000000 Hz [ 0.000000] sched_clock: 32 bits at 26MHz, resolution 38ns, wraps every 165191ms [ 0.000000] Unable to handle kernel paging request at virtual address 00030ef1 [ 0.000000] pgd = c0004000 [ 0.000000] [00030ef1] *pgd=00000000 [ 0.000000] Internal error: Oops: 5 [#1] SMP [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 Not tainted (3.3.0-rc1-11574-g0c76665-dirty #3) [ 0.000000] PC is at dmtimer_read_sched_clock+0x18/0x4c [ 0.000000] LR is at update_sched_clock+0x10/0x84 [ 0.000000] pc : [<c00243b8>] lr : [<c0018684>] psr: 200001d3 [ 0.000000] sp : c0641f38 ip : c0641e18 fp : 0000000a [ 0.000000] r10: 151c3303 r9 : 00000026 r8 : 76276259 [ 0.000000] r7 : 00028547 r6 : c065ac80 r5 : 431bde82 r4 : c0655968 [ 0.000000] r3 : 00030ef1 r2 : fb032000 r1 : 00000028 r0 : 00000001 Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-01-26Merge branch 'sa11x0-mcp-fixes' into fixesRussell King8-86/+3
2012-01-26arch/arm/mach-imx/mach-mx53_ard.c: add missing iounmapJulia Lawall1-1/+3
Add missing iounmap in error handling code, in a case where the function already preforms iounmap on some other execution path. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e; statement S,S1; int ret; @@ e = \(ioremap\|ioremap_nocache\)(...) ... when != iounmap(e) if (<+...e...+>) S ... when any when != iounmap(e) *if (...) { ... when != iounmap(e) return ...; } ... when any iounmap(e); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-01-26ARM: imx: iomux-v1.h: Fix build error due to __init annotationFabio Estevam1-1/+1
Fix the following build error found when building imx_v4_v5_defconfig: CC arch/arm/mach-imx/mach-imx27ipcam.o In file included from arch/arm/plat-mxc/include/mach/iomux-mx27.h:23, from arch/arm/mach-imx/mach-imx27ipcam.c:22: arch/arm/plat-mxc/include/mach/iomux-v1.h:99: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'imx_iomuxv1_init' Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-01-26OMAPDSS: HDMI: PHY burnout fixTomi Valkeinen2-0/+10
A hardware bug in the OMAP4 HDMI PHY causes physical damage to the board if the HDMI PHY is kept powered on when the cable is not connected. This patch solves the problem by adding hot-plug-detection into the HDMI IP driver. This is not a real HPD support in the sense that nobody else than the IP driver gets to know about the HPD events, but is only meant to fix the HW bug. The strategy is simple: If the display device is turned off by the user, the PHY power is set to OFF. When the display device is turned on by the user, the PHY power is set either to LDOON or TXON, depending on whether the HDMI cable is connected. The reason to avoid PHY OFF when the display device is on, but the cable is disconnected, is that when the PHY is turned OFF, the HDMI IP is not "ticking" and thus the DISPC does not receive pixel clock from the HDMI IP. This would, for example, prevent any VSYNCs from happening, and would thus affect the users of omapdss. By using LDOON when the cable is disconnected we'll avoid the HW bug, but keep the HDMI working as usual from the user's point of view. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-01-26OMAP: 4430SDP/Panda: add HDMI HPD gpioTomi Valkeinen2-0/+6
Both Panda and 4430SDP use GPIO 63 as HDMI hot-plug-detect. Configure this GPIO in the board files. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2012-01-26OMAP: 4430SDP/Panda: setup HDMI GPIO muxesTomi Valkeinen2-0/+6
The HDMI GPIO pins LS_OE and CT_CP_HPD are not currently configured. This patch configures them as output pins. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2012-01-26OMAPDSS: remove wrong HDMI HPD muxingTomi Valkeinen1-4/+0
"hdmi_hpd" pin is muxed to INPUT and PULLUP, but the pin is not currently used, and in the future when it is used, the pin is used as a GPIO and is board specific, not an OMAP4 wide thing. So remove the muxing for now. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2012-01-26OMAP: 4430SDP/Panda: rename HPD GPIO to CT_CP_HPDTomi Valkeinen2-4/+4
The GPIO 60 on 4430sdp and Panda is not HPD GPIO, as currently marked in the board files, but CT_CP_HPD, which is used to enable/disable HPD functionality. This patch renames the GPIO. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2012-01-26OMAP: 4430SDP/Panda: use gpio_free_array to free HDMI gpiosTomi Valkeinen2-4/+2
Instead of freeing the GPIOs individually, use gpio_free_array(). Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2012-01-25ARM: OMAP3: hwmod data: register dss hwmods after dss_coreIlya Yanok1-6/+24
dss_core has to be initialized before any other DSS hwmod. Currently this is broken as dss_core is listed in chip/revision specific hwmod lists while other DSS hwmods are listed in common list which is registered first. This patch moves DSS hwmods (except for dss_core) to the separate list which is registered last to ensure that dss_core is already registered. This solves the problem with BUG() in L3 interrupt handler on boards with DSS enabled in bootloader. The long-term fix to this is to ensure modules are set up in dependency order in the hwmod core code. CC: Tomi Valkeinen <tomi.valkeinen@ti.com> CC: Archit Taneja <archit@ti.com> CC: Paul Walmsley <paul@pwsan.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> [paul@pwsan.com: add notes that this is just a temporary workaround until hwmod dependencies are added] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-01-25ARM: OMAP2/3: PRM: fix missing plat/irqs.h build breakagePaul Walmsley1-0/+1
Commit 22f51371f8c35869ed850f46aa76b6cc2b502110 ("ARM: OMAP3: pm: use prcm chain handler") breaks the build on a 2420-only config, due to a missing include for plat/irqs.h: CC arch/arm/mach-omap2/prm2xxx_3xxx.o arch/arm/mach-omap2/prm2xxx_3xxx.c:41:11: error: 'INT_34XX_PRCM_MPU_IRQ' undeclared here (not in a function) Fix by explicitly including it. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Kevin Hilman <khilman@ti.com>
2012-01-25ARM: OMAP2+: io: fix compilation breakage on 2420-only configsPaul Walmsley1-1/+3
Commit 7b250aff1ce346b6c7bc0329a2350334d1c66525 ("ARM: OMAP: Avoid cpu_is_omapxxxx usage until map_io is done") breaks the build on a 2420-only config on v3.3-rc1: arch/arm/mach-omap2/built-in.o: In function `omap2430_init_early': arch/arm/mach-omap2/io.c:406: undefined reference to `omap2_set_globals_243x' arch/arm/mach-omap2/io.c:410: undefined reference to `omap243x_clockdomains_init' arch/arm/mach-omap2/io.c:411: undefined reference to `omap2430_hwmod_init' Fix by only compiling omap2420_init_early() when CONFIG_SOC_OMAP2420 is selected, and only compiling omap2430_init_early() when CONFIG_SOC_OMAP2430 is selected. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com>
2012-01-25ARM: OMAP4: hwmod data: Add names for DMIC memory address spacePeter Ujfalusi1-0/+2
To be able to get the memory resources by name from the DMIC driver (for MPU and for DMA). Without this patch, functionality that was working in 3.2 breaks in 3.3-rc1. This patch should have gone in as part of the 3.3 merge window, but was inadvertently missed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> [paul@pwsan.com: added commit message note] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-01-25ARM: OMAP3: hwmod data: add SYSC_HAS_ENAWAKEUP for dispcTomi Valkeinen1-1/+2
dispc's sysc_flags is missing SYSC_HAS_ENAWAKEUP flag. This seems to cause SYNC_LOST errors from the DSS when the power management is enabled. This patch adds the missing SYSC_HAS_ENAWAKEUP flag. Note that there are other flags missing also (clock activity, DSI's sysc flags), but as they are not critical, they will be fixed in the next merge window. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-01-25ARM: OMAP2+: hwmod data: split omap2/3 dispc hwmod classTomi Valkeinen3-22/+44
Currently OMAP2 and 3 share the same omap_hwmod_class and omap_hwmod_class_sysconfig for dispc. However, OMAP3 has sysconfig bits that OMAP2 doesn't have, so we need to split those structs into OMAP2 and OMAP3 specific versions. This patch only splits the structs, without changing the contents. This is a prerequisite for a subsequent fix. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> [paul@pwsan.com: added commit note] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-01-25ARM: 7301/1: Rename the T() macro to TUSER() to avoid namespace conflictsCatalin Marinas7-79/+79
This macro is used to generate unprivileged accesses (LDRT/STRT) to user space. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-25ARM: 7299/1: ftrace: clear zero bit in reported IPs for Thumb-2Rabin Vincent1-6/+9
The dynamic ftrace ops startup test currently fails on Thumb-2 kernels: Testing tracer function: PASSED Testing dynamic ftrace: PASSED Testing dynamic ftrace ops #1: (0 0 0 0 0) FAILED! This is because while the addresses in the mcount records do not have the zero bit set, the IP reported by the mcount call does have it set (because it is copied from the LR). This mismatch causes the ops filtering in ftrace_ops_list_func() to not call the relevant tracers. Fix this by clearing the zero bit before adjusting the LR for the mcount instruction size. Also, combine the mov+sub into a single sub instruction. Acked-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-15 08:05:04 +0000