summaryrefslogtreecommitdiffstats
path: root/arch/arm64
AgeCommit message (Collapse)AuthorFilesLines
2019-05-01arm64: ssbs: Don't treat CPUs with SSBS as unaffected by SSBWill Deacon1-4/+6
SSBS provides a relatively cheap mitigation for SSB, but it is still a mitigation and its presence does not indicate that the CPU is unaffected by the vulnerability. Tweak the mitigation logic so that we report the correct string in sysfs. Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-05-01arm64: enable generic CPU vulnerabilites supportMian Yousaf Kaukab1-0/+1
Enable CPU vulnerabilty show functions for spectre_v1, spectre_v2, meltdown and store-bypass. Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-05-01arm64: add sysfs vulnerability show for speculative store bypassJeremy Linton1-0/+42
Return status based on ssbd_state and __ssb_safe. If the mitigation is disabled, or the firmware isn't responding then return the expected machine state based on a whitelist of known good cores. Given a heterogeneous machine, the overall machine vulnerability defaults to safe but is reset to unsafe when we miss the whitelist and the firmware doesn't explicitly tell us the core is safe. In order to make that work we delay transitioning to vulnerable until we know the firmware isn't responding to avoid a case where we miss the whitelist, but the firmware goes ahead and reports the core is not vulnerable. If all the cores in the machine have SSBS, then __ssb_safe will remain true. Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-26arm64: Always enable ssb vulnerability detectionJeremy Linton2-8/+5
Ensure we are always able to detect whether or not the CPU is affected by SSB, so that we can later advertise this to userspace. Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> [will: Use IS_ENABLED instead of #ifdef] Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-26arm64: add sysfs vulnerability show for spectre-v2Jeremy Linton1-1/+26
Track whether all the cores in the machine are vulnerable to Spectre-v2, and whether all the vulnerable cores have been mitigated. We then expose this information to userspace via sysfs. Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-26arm64: Always enable spectre-v2 vulnerability detectionJeremy Linton1-7/+8
Ensure we are always able to detect whether or not the CPU is affected by Spectre-v2, so that we can later advertise this to userspace. Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-26arm64: Use firmware to detect CPUs that are not affected by Spectre-v2Marc Zyngier1-9/+23
The SMCCC ARCH_WORKAROUND_1 service can indicate that although the firmware knows about the Spectre-v2 mitigation, this particular CPU is not vulnerable, and it is thus not necessary to call the firmware on this CPU. Let's use this information to our benefit. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-26arm64: Advertise mitigation of Spectre-v2, or lack thereofMarc Zyngier1-53/+56
We currently have a list of CPUs affected by Spectre-v2, for which we check that the firmware implements ARCH_WORKAROUND_1. It turns out that not all firmwares do implement the required mitigation, and that we fail to let the user know about it. Instead, let's slightly revamp our checks, and rely on a whitelist of cores that are known to be non-vulnerable, and let the user know the status of the mitigation in the kernel log. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-26arm64: add sysfs vulnerability show for meltdownJeremy Linton1-14/+44
We implement page table isolation as a mitigation for meltdown. Report this to userspace via sysfs. Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-26arm64: Add sysfs vulnerability show for spectre-v1Mian Yousaf Kaukab1-0/+6
spectre-v1 has been mitigated and the mitigation is always active. Report this to userspace via sysfs Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-26arm64: Provide a command line to disable spectre_v2 mitigationJeremy Linton1-0/+13
There are various reasons, such as benchmarking, to disable spectrev2 mitigation on a machine. Provide a command-line option to do so. Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-03-31Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-3/+14
Pull KVM fixes from Paolo Bonzini: "A collection of x86 and ARM bugfixes, and some improvements to documentation. On top of this, a cleanup of kvm_para.h headers, which were exported by some architectures even though they not support KVM at all. This is responsible for all the Kbuild changes in the diffstat" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits) Documentation: kvm: clarify KVM_SET_USER_MEMORY_REGION KVM: doc: Document the life cycle of a VM and its resources KVM: selftests: complete IO before migrating guest state KVM: selftests: disable stack protector for all KVM tests KVM: selftests: explicitly disable PIE for tests KVM: selftests: assert on exit reason in CR4/cpuid sync test KVM: x86: update %rip after emulating IO x86/kvm/hyper-v: avoid spurious pending stimer on vCPU init kvm/x86: Move MSR_IA32_ARCH_CAPABILITIES to array emulated_msrs KVM: x86: Emulate MSR_IA32_ARCH_CAPABILITIES on AMD hosts kvm: don't redefine flags as something else kvm: mmu: Used range based flushing in slot_handle_level_range KVM: export <linux/kvm_para.h> and <asm/kvm_para.h> iif KVM is supported KVM: x86: remove check on nr_mmu_pages in kvm_arch_commit_memory_region() kvm: nVMX: Add a vmentry check for HOST_SYSENTER_ESP and HOST_SYSENTER_EIP fields KVM: SVM: Workaround errata#1096 (insn_len maybe zero on SMAP violation) KVM: Reject device ioctls from processes other than the VM's creator KVM: doc: Fix incorrect word ordering regarding supported use of APIs KVM: x86: fix handling of role.cr4_pae and rename it to 'gpte_size' KVM: nVMX: Do not inherit quadrant and invalid for the root shadow EPT ...
2019-03-29Merge tag 'arm64-fixes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Catalin Marinas: "Use memblock_alloc() instead of memblock_alloc_low() in request_standard_resources(), the latter being limited to the low 4G memory range on arm64" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: replace memblock_alloc_low with memblock_alloc
2019-03-28Merge tag 'kvmarm-fixes-for-5.1' of ↵Paolo Bonzini2-3/+14
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master KVM/ARM fixes for 5.1 - Fix THP handling in the presence of pre-existing PTEs - Honor request for PTE mappings even when THPs are available - GICv4 performance improvement - Take the srcu lock when writing to guest-controlled ITS data structures - Reset the virtual PMU in preemptible context - Various cleanups
2019-03-27arm64: replace memblock_alloc_low with memblock_allocChen Zhou1-1/+1
If we use "crashkernel=Y[@X]" and the start address is above 4G, the arm64 kdump capture kernel may call memblock_alloc_low() failure in request_standard_resources(). Replacing memblock_alloc_low() with memblock_alloc(). [ 0.000000] MEMBLOCK configuration: [ 0.000000] memory size = 0x0000000040650000 reserved size = 0x0000000004db7f39 [ 0.000000] memory.cnt = 0x6 [ 0.000000] memory[0x0] [0x00000000395f0000-0x000000003968ffff], 0x00000000000a0000 bytes on node 0 flags: 0x4 [ 0.000000] memory[0x1] [0x0000000039730000-0x000000003973ffff], 0x0000000000010000 bytes on node 0 flags: 0x4 [ 0.000000] memory[0x2] [0x0000000039780000-0x000000003986ffff], 0x00000000000f0000 bytes on node 0 flags: 0x4 [ 0.000000] memory[0x3] [0x0000000039890000-0x0000000039d0ffff], 0x0000000000480000 bytes on node 0 flags: 0x4 [ 0.000000] memory[0x4] [0x000000003ed00000-0x000000003ed2ffff], 0x0000000000030000 bytes on node 0 flags: 0x4 [ 0.000000] memory[0x5] [0x0000002040000000-0x000000207fffffff], 0x0000000040000000 bytes on node 0 flags: 0x0 [ 0.000000] reserved.cnt = 0x7 [ 0.000000] reserved[0x0] [0x0000002040080000-0x0000002041c4dfff], 0x0000000001bce000 bytes flags: 0x0 [ 0.000000] reserved[0x1] [0x0000002041c53000-0x0000002042c203f8], 0x0000000000fcd3f9 bytes flags: 0x0 [ 0.000000] reserved[0x2] [0x000000207da00000-0x000000207dbfffff], 0x0000000000200000 bytes flags: 0x0 [ 0.000000] reserved[0x3] [0x000000207ddef000-0x000000207fbfffff], 0x0000000001e11000 bytes flags: 0x0 [ 0.000000] reserved[0x4] [0x000000207fdf2b00-0x000000207fdfc03f], 0x0000000000009540 bytes flags: 0x0 [ 0.000000] reserved[0x5] [0x000000207fdfd000-0x000000207ffff3ff], 0x0000000000202400 bytes flags: 0x0 [ 0.000000] reserved[0x6] [0x000000207ffffe00-0x000000207fffffff], 0x0000000000000200 bytes flags: 0x0 [ 0.000000] Kernel panic - not syncing: request_standard_resources: Failed to allocate 384 bytes [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.1.0-next-20190321+ #4 [ 0.000000] Call trace: [ 0.000000] dump_backtrace+0x0/0x188 [ 0.000000] show_stack+0x24/0x30 [ 0.000000] dump_stack+0xa8/0xcc [ 0.000000] panic+0x14c/0x31c [ 0.000000] setup_arch+0x2b0/0x5e0 [ 0.000000] start_kernel+0x90/0x52c [ 0.000000] ---[ end Kernel panic - not syncing: request_standard_resources: Failed to allocate 384 bytes ]--- Link: https://www.spinics.net/lists/arm-kernel/msg715293.html Signed-off-by: Chen Zhou <chenzhou10@huawei.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-03-25arm64: tegra: Disable CQE Support for SDMMC4 on Tegra186Jonathan Hunter1-1/+0
Enabling CQE support on Tegra186 Jetson TX2 has introduced a regression that is causing accesses to the file-system on the eMMC to fail. Errors such as the following have been observed ... mmc2: running CQE recovery mmc2: mmc_select_hs400 failed, error -110 print_req_error: I/O error, dev mmcblk2, sector 8 flags 80700 mmc2: cqhci: CQE failed to exit halt state For now disable CQE support for Tegra186 until this issue is resolved. Fixes: dfd3cb6feb73 arm64: tegra: Add CQE Support for SDMMC4 Signed-off-by: Jonathan Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-03-25Merge tag 'arm-soc/for-5.1/soc-fixes' of ↵Arnd Bergmann1-0/+1
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM/ARM64-based SoCs fixes for 5.1, please pull the following: - Eric provides fixes for the bcm2835-pm driver: added missing depends on MFD_CORE for the ARM64 definition of ARCH_BCM2835, fixing error paths on initialization and fixing the PM_IMAGE_PERI power domain * tag 'arm-soc/for-5.1/soc-fixes' of https://github.com/Broadcom/stblinux: arm64: bcm2835: Add missing dependency on MFD_CORE. soc: bcm: bcm2835-pm: Fix error paths of initialization. soc: bcm: bcm2835-pm: Fix PM_IMAGE_PERI power domain support.
2019-03-25Merge tag 'renesas-fixes-for-v5.1' of ↵Arnd Bergmann2-8/+6
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/fixes Renesas ARM Based SoC Fixes for v5.1 R-Car Gen3 E3 (r8a77990) and RZ/G2E (r8a774c0) SoCs: * Correct SCIF5 DMA channels * tag 'renesas-fixes-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: dts: renesas: r8a774c0: Fix SCIF5 DMA channels arm64: dts: renesas: r8a77990: Fix SCIF5 DMA channels
2019-03-20arm64: remove obsolete selection of MULTI_IRQ_HANDLERMatthias Kaehlcke1-1/+0
The arm64 config selects MULTI_IRQ_HANDLER, which was renamed to GENERIC_IRQ_MULTI_HANDLER by commit 4c301f9b6a94 ("ARM: Convert to GENERIC_IRQ_MULTI_HANDLER"). The 'new' option is already selected, so just remove the obsolete entry. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-03-19KVM: arm/arm64: vgic-its: Take the srcu lock when writing to guest memoryMarc Zyngier1-0/+11
When halting a guest, QEMU flushes the virtual ITS caches, which amounts to writing to the various tables that the guest has allocated. When doing this, we fail to take the srcu lock, and the kernel shouts loudly if running a lockdep kernel: [ 69.680416] ============================= [ 69.680819] WARNING: suspicious RCU usage [ 69.681526] 5.1.0-rc1-00008-g600025238f51-dirty #18 Not tainted [ 69.682096] ----------------------------- [ 69.682501] ./include/linux/kvm_host.h:605 suspicious rcu_dereference_check() usage! [ 69.683225] [ 69.683225] other info that might help us debug this: [ 69.683225] [ 69.683975] [ 69.683975] rcu_scheduler_active = 2, debug_locks = 1 [ 69.684598] 6 locks held by qemu-system-aar/4097: [ 69.685059] #0: 0000000034196013 (&kvm->lock){+.+.}, at: vgic_its_set_attr+0x244/0x3a0 [ 69.686087] #1: 00000000f2ed935e (&its->its_lock){+.+.}, at: vgic_its_set_attr+0x250/0x3a0 [ 69.686919] #2: 000000005e71ea54 (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0 [ 69.687698] #3: 00000000c17e548d (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0 [ 69.688475] #4: 00000000ba386017 (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0 [ 69.689978] #5: 00000000c2c3c335 (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0 [ 69.690729] [ 69.690729] stack backtrace: [ 69.691151] CPU: 2 PID: 4097 Comm: qemu-system-aar Not tainted 5.1.0-rc1-00008-g600025238f51-dirty #18 [ 69.691984] Hardware name: rockchip evb_rk3399/evb_rk3399, BIOS 2019.04-rc3-00124-g2feec69fb1 03/15/2019 [ 69.692831] Call trace: [ 69.694072] lockdep_rcu_suspicious+0xcc/0x110 [ 69.694490] gfn_to_memslot+0x174/0x190 [ 69.694853] kvm_write_guest+0x50/0xb0 [ 69.695209] vgic_its_save_tables_v0+0x248/0x330 [ 69.695639] vgic_its_set_attr+0x298/0x3a0 [ 69.696024] kvm_device_ioctl_attr+0x9c/0xd8 [ 69.696424] kvm_device_ioctl+0x8c/0xf8 [ 69.696788] do_vfs_ioctl+0xc8/0x960 [ 69.697128] ksys_ioctl+0x8c/0xa0 [ 69.697445] __arm64_sys_ioctl+0x28/0x38 [ 69.697817] el0_svc_common+0xd8/0x138 [ 69.698173] el0_svc_handler+0x38/0x78 [ 69.698528] el0_svc+0x8/0xc The fix is to obviously take the srcu lock, just like we do on the read side of things since bf308242ab98. One wonders why this wasn't fixed at the same time, but hey... Fixes: bf308242ab98 ("KVM: arm/arm64: VGIC/ITS: protect kvm_read_guest() calls with SRCU lock") Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-03-19KVM: arm64: Reset the PMU in preemptible contextMarc Zyngier1-3/+3
We've become very cautious to now always reset the vcpu when nothing is loaded on the physical CPU. To do so, we now disable preemption and do a kvm_arch_vcpu_put() to make sure we have all the state in memory (and that it won't be loaded behind out back). This now causes issues with resetting the PMU, which calls into perf. Perf itself uses mutexes, which clashes with the lack of preemption. It is worth realizing that the PMU is fully emulated, and that no PMU state is ever loaded on the physical CPU. This means we can perfectly reset the PMU outside of the non-preemptible section. Fixes: e761a927bc9a ("KVM: arm/arm64: Reset the VCPU without preemption and vcpu state loaded") Reported-by: Julien Grall <julien.grall@arm.com> Tested-by: Julien Grall <julien.grall@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-03-19arm64: kpti: Whitelist HiSilicon Taishan v110 CPUsHanjun Guo1-0/+1
HiSilicon Taishan v110 CPUs didn't implement CSV3 field of the ID_AA64PFR0_EL1 and are not susceptible to Meltdown, so whitelist the MIDR in kpti_safe_list[] table. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Zhangshaokun <zhangshaokun@hisilicon.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-03-19arm64: Add MIDR encoding for HiSilicon Taishan CPUsHanjun Guo1-0/+4
Adding the MIDR encodings for HiSilicon Taishan v110 CPUs, which is used in Kunpeng ARM64 server SoCs. TSV110 is the abbreviation of Taishan v110. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Zhangshaokun <zhangshaokun@hisilicon.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-03-19arm64/stacktrace: Export save_stack_trace_regs()William Cohen1-0/+1
The ARM64 implements the save_stack_trace_regs function, but it is unusable for any diagnostic tooling compiled as a kernel module due the missing EXPORT_SYMBOL_GPL for the function. Export save_stack_trace_regs() to align with other architectures such as s390, openrisc, and powerpc. This is similar to the ARM64 export of save_stack_trace_tsk() added in git commit e27c7fa015d6. Signed-off-by: William Cohen <wcohen@redhat.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-03-19arm64: apply workaround on A64FX v1r0Mark Rutland1-1/+1
Fujitsu erratum 010001 applies to A64FX v0r0 and v1r0, and we try to handle either by masking MIDR with MIDR_FUJITSU_ERRATUM_010001_MASK before comparing it to MIDR_FUJITSU_ERRATUM_010001. Unfortunately, MIDR_FUJITSU_ERRATUM_010001 is constructed incorrectly using MIDR_VARIANT(), which is intended to extract the variant field from MIDR_EL1, rather than generate the field in-place. This results in MIDR_FUJITSU_ERRATUM_010001 being all-ones, and we only match A64FX v0r0. This patch uses MIDR_CPU_VAR_REV() to generate an in-place mask for the variant field, ensuring the we match both v0r0 and v1r0. Fixes: 3e32131abc311a5c ("arm64: Add workaround for Fujitsu A64FX erratum 010001") Reported-by: "Okamoto, Takayuki" <tokamoto@jp.fujitsu.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> [catalin.marinas@arm.com: fixed the patch author] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-03-19arm64: kprobes: Use arch_populate_kprobe_blacklist()Masami Hiramatsu1-19/+30
Use arch_populate_kprobe_blacklist() instead of arch_within_kprobe_blacklist() so that we can see the full blacklisted symbols under the debugfs. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> [catalin.marinas@arm.com: Add arch_populate_kprobe_blacklist() comment] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-03-19arm64: kprobes: Move exception_text check in blacklistMasami Hiramatsu1-4/+2
Move exception/irqentry text address check in blacklist, since those are symbol based rejection. If we prohibit probing on the symbols in exception_text, those should be blacklisted. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-03-19arm64: kprobes: Remove unneeded RODATA checkMasami Hiramatsu1-6/+0
Remove unneeded RODATA check from arch_prepare_kprobe(). Since check_kprobe_address_safe() already ensured that the probe address is in kernel text, we don't need to check whether the address in RODATA or not. That must be always false. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-03-19arm64: kprobes: Move extable address check into arch_prepare_kprobe()Masami Hiramatsu1-2/+5
Move extable address check into arch_prepare_kprobe() from arch_within_kprobe_blacklist(). The blacklist is exposed via debugfs as a list of symbols. The extable entries are smaller, so must be filtered out by arch_prepare_kprobe(). Acked-by: Will Deacon <will.deacon@arm.com> Reviewed-by: James Morse <james.morse@arm.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-03-18Merge tag 'tags/bcm2835-drivers-next-2019-03-12' into soc/fixesFlorian Fainelli1-0/+1
This pull request brings in a build fix for arm64 with bcm2835 enabled, and fixes the driver in the presence of -EPROBE_DEFER. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-03-17Merge tag 'kbuild-v5.1-2' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - add more Build-Depends to Debian source package - prefix header search paths with $(srctree)/ - make modpost show verbose section mismatch warnings - avoid hard-coded CROSS_COMPILE for h8300 - fix regression for Debian make-kpkg command - add semantic patch to detect missing put_device() - fix some warnings of 'make deb-pkg' - optimize NOSTDINC_FLAGS evaluation - add warnings about redundant generic-y - clean up Makefiles and scripts * tag 'kbuild-v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: remove stale lxdialog/.gitignore kbuild: force all architectures except um to include mandatory-y kbuild: warn redundant generic-y Revert "modsign: Abort modules_install when signing fails" kbuild: Make NOSTDINC_FLAGS a simply expanded variable kbuild: deb-pkg: avoid implicit effects coccinelle: semantic code search for missing put_device() kbuild: pkg: grep include/config/auto.conf instead of $KCONFIG_CONFIG kbuild: deb-pkg: introduce is_enabled and if_enabled_echo to builddeb kbuild: deb-pkg: add CONFIG_ prefix to kernel config options kbuild: add workaround for Debian make-kpkg kbuild: source include/config/auto.conf instead of ${KCONFIG_CONFIG} unicore32: simplify linker script generation for decompressor h8300: use cc-cross-prefix instead of hardcoding h8300-unknown-linux- kbuild: move archive command to scripts/Makefile.lib modpost: always show verbose warning for section mismatch ia64: prefix header search path with $(srctree)/ libfdt: prefix header search paths with $(srctree)/ deb-pkg: generate correct build dependencies
2019-03-17kbuild: force all architectures except um to include mandatory-yMasahiro Yamada1-1/+0
Currently, every arch/*/include/uapi/asm/Kbuild explicitly includes the common Kbuild.asm file. Factor out the duplicated include directives to scripts/Makefile.asm-generic so that no architecture would opt out of the mandatory-y mechanism. um is not forced to include mandatory-y since it is a very exceptional case which does not support UAPI. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-15Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds11-85/+188
Pull KVM updates from Paolo Bonzini: "ARM: - some cleanups - direct physical timer assignment - cache sanitization for 32-bit guests s390: - interrupt cleanup - introduction of the Guest Information Block - preparation for processor subfunctions in cpu models PPC: - bug fixes and improvements, especially related to machine checks and protection keys x86: - many, many cleanups, including removing a bunch of MMU code for unnecessary optimizations - AVIC fixes Generic: - memcg accounting" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (147 commits) kvm: vmx: fix formatting of a comment KVM: doc: Document the life cycle of a VM and its resources MAINTAINERS: Add KVM selftests to existing KVM entry Revert "KVM/MMU: Flush tlb directly in the kvm_zap_gfn_range()" KVM: PPC: Book3S: Add count cache flush parameters to kvmppc_get_cpu_char() KVM: PPC: Fix compilation when KVM is not enabled KVM: Minor cleanups for kvm_main.c KVM: s390: add debug logging for cpu model subfunctions KVM: s390: implement subfunction processor calls arm64: KVM: Fix architecturally invalid reset value for FPEXC32_EL2 KVM: arm/arm64: Remove unused timer variable KVM: PPC: Book3S: Improve KVM reference counting KVM: PPC: Book3S HV: Fix build failure without IOMMU support Revert "KVM: Eliminate extra function calls in kvm_get_dirty_log_protect()" x86: kvmguest: use TSC clocksource if invariant TSC is exposed KVM: Never start grow vCPU halt_poll_ns from value below halt_poll_ns_grow_start KVM: Expose the initial start value in grow_halt_poll_ns() as a module parameter KVM: grow_halt_poll_ns() should never shrink vCPU halt_poll_ns KVM: x86/mmu: Consolidate kvm_mmu_zap_all() and kvm_mmu_zap_mmio_sptes() KVM: x86/mmu: WARN if zapping a MMIO spte results in zapping children ...
2019-03-12arm64: bcm2835: Add missing dependency on MFD_CORE.Eric Anholt1-0/+1
When adding the MFD dependency for power domains and WDT in bcm2835, I added it only on the arm32 side and missed it for arm64. Fixes: 5e6acc3e678e ("bcm2835-pm: Move bcm2835-watchdog's DT probe to an MFD.") Signed-off-by: Eric Anholt <eric@anholt.net> Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
2019-03-12treewide: add checks for the return value of memblock_alloc*()Mike Rapoport2-3/+15
Add check for the return value of memblock_alloc*() functions and call panic() in case of error. The panic message repeats the one used by panicing memblock allocators with adjustment of parameters to include only relevant ones. The replacement was mostly automated with semantic patches like the one below with manual massaging of format strings. @@ expression ptr, size, align; @@ ptr = memblock_alloc(size, align); + if (!ptr) + panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, size, align); [anders.roxell@linaro.org: use '%pa' with 'phys_addr_t' type] Link: http://lkml.kernel.org/r/20190131161046.21886-1-anders.roxell@linaro.org [rppt@linux.ibm.com: fix format strings for panics after memblock_alloc] Link: http://lkml.kernel.org/r/1548950940-15145-1-git-send-email-rppt@linux.ibm.com [rppt@linux.ibm.com: don't panic if the allocation in sparse_buffer_init fails] Link: http://lkml.kernel.org/r/20190131074018.GD28876@rapoport-lnx [akpm@linux-foundation.org: fix xtensa printk warning] Link: http://lkml.kernel.org/r/1548057848-15136-20-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Reviewed-by: Guo Ren <ren_guo@c-sky.com> [c-sky] Acked-by: Paul Burton <paul.burton@mips.com> [MIPS] Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [s390] Reviewed-by: Juergen Gross <jgross@suse.com> [Xen] Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12memblock: memblock_phys_alloc(): don't panicMike Rapoport1-0/+2
Make the memblock_phys_alloc() function an inline wrapper for memblock_phys_alloc_range() and update the memblock_phys_alloc() callers to check the returned value and panic in case of error. Link: http://lkml.kernel.org/r/1548057848-15136-8-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12memblock: memblock_phys_alloc_try_nid(): don't panicMike Rapoport1-0/+4
The memblock_phys_alloc_try_nid() function tries to allocate memory from the requested node and then falls back to allocation from any node in the system. The memblock_alloc_base() fallback used by this function panics if the allocation fails. Replace the memblock_alloc_base() fallback with the direct call to memblock_alloc_range_nid() and update the memblock_phys_alloc_try_nid() callers to check the returned value and panic in case of error. Link: http://lkml.kernel.org/r/1548057848-15136-7-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-11Merge tag 'pinctrl-v5.1-1' of ↵Linus Torvalds1-0/+629
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is a calm cycle, not much happened this time around: not even much incremental development. Some three new drivers, that is all. No core changes. New drivers: - NXP (ex Freescale) i.MX 8QM driver. - NXP (ex Freescale) i.MX 8MM driver. - AT91 SAM9X60 subdriver. Improvements: - Support for external interrups (EINT) on Mediatek virtual GPIOs. - Make BCM2835 pin config fully generic. - Lots of Renesas SH-PFC incremental improvements" * tag 'pinctrl-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (70 commits) pinctrl: imx: fix scu link errors dt-bindings: pinctrl: Document the i.MX50 IOMUXC binding pinctrl: qcom: spmi-gpio: Reorder debug print pinctrl: nomadik: fix possible object reference leak pinctrl: stm32: return error upon hwspinlock failure pinctrl: stm32: fix memory leak issue pinctrl: sh-pfc: r8a77965: Add DRIF pins, groups and functions pinctrl: sh-pfc: r8a77965: Add TMU pins, groups and functions pinctrl: sh-pfc: Validate fixed-size field widths at build time pinctrl: sh-pfc: sh73a0: Fix fsic_spdif pin groups pinctrl: sh-pfc: r8a7792: Fix vin1_data18_b pin group pinctrl: sh-pfc: r8a7791: Fix scifb2_data_c pin group pinctrl: sh-pfc: emev2: Add missing pinmux functions pinctrl: sunxi: Support I/O bias voltage setting on A80 pinctrl: ingenic: Add LCD pins for the JZ4725B SoC pinctrl: samsung: Remove legacy API for handling external wakeup interrupts mask pinctrl: bcm2835: Direct GPIO config changes to generic pinctrl pinctrl: bcm2835: declare pin config as generic pinctrl: qcom: qcs404: Drop unused UFS_RESET macro dt-bindings: add documentation for slew rate ...
2019-03-10Merge tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds2-11/+2
Pull DMA mapping updates from Christoph Hellwig: - add debugfs support for dumping dma-debug information (Corentin Labbe) - Kconfig cleanups (Andy Shevchenko and me) - debugfs cleanups (Greg Kroah-Hartman) - improve dma_map_resource and use it in the media code - arch_setup_dma_ops / arch_teardown_dma_ops cleanups - various small cleanups and improvements for the per-device coherent allocator - make the DMA mask an upper bound and don't fail "too large" dma mask in the remaning two architectures - this will allow big driver cleanups in the following merge windows * tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mapping: (21 commits) Documentation/DMA-API-HOWTO: update dma_mask sections sparc64/pci_sun4v: allow large DMA masks sparc64/iommu: allow large DMA masks sparc64: refactor the ali DMA quirk ccio: allow large DMA masks dma-mapping: remove the DMA_MEMORY_EXCLUSIVE flag dma-mapping: remove dma_mark_declared_memory_occupied dma-mapping: move CONFIG_DMA_CMA to kernel/dma/Kconfig dma-mapping: improve selection of dma_declare_coherent availability dma-mapping: remove an incorrect __iommem annotation of: select OF_RESERVED_MEM automatically device.h: dma_mem is only needed for HAVE_GENERIC_DMA_COHERENT mfd/sm501: depend on HAS_DMA dma-mapping: add a kconfig symbol for arch_teardown_dma_ops availability dma-mapping: add a kconfig symbol for arch_setup_dma_ops availability dma-mapping: move debug configuration options to kernel/dma dma-debug: add dumping facility via debugfs dma: debug: no need to check return value of debugfs_create functions videobuf2: replace a layering violation with dma_map_resource dma-mapping: don't BUG when calling dma_map_resource on RAM ...
2019-03-10Merge tag 'arm64-upstream' of ↵Linus Torvalds45-214/+775
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - Pseudo NMI support for arm64 using GICv3 interrupt priorities - uaccess macros clean-up (unsafe user accessors also merged but reverted, waiting for objtool support on arm64) - ptrace regsets for Pointer Authentication (ARMv8.3) key management - inX() ordering w.r.t. delay() on arm64 and riscv (acks in place by the riscv maintainers) - arm64/perf updates: PMU bindings converted to json-schema, unused variable and misleading comment removed - arm64/debug fixes to ensure checking of the triggering exception level and to avoid the propagation of the UNKNOWN FAR value into the si_code for debug signals - Workaround for Fujitsu A64FX erratum 010001 - lib/raid6 ARM NEON optimisations - NR_CPUS now defaults to 256 on arm64 - Minor clean-ups (documentation/comments, Kconfig warning, unused asm-offsets, clang warnings) - MAINTAINERS update for list information to the ARM64 ACPI entry * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits) arm64: mmu: drop paging_init comments arm64: debug: Ensure debug handlers check triggering exception level arm64: debug: Don't propagate UNKNOWN FAR into si_code for debug signals Revert "arm64: uaccess: Implement unsafe accessors" arm64: avoid clang warning about self-assignment arm64: Kconfig.platforms: fix warning unmet direct dependencies lib/raid6: arm: optimize away a mask operation in NEON recovery routine lib/raid6: use vdupq_n_u8 to avoid endianness warnings arm64: io: Hook up __io_par() for inX() ordering riscv: io: Update __io_[p]ar() macros to take an argument asm-generic/io: Pass result of I/O accessor to __io_[p]ar() arm64: Add workaround for Fujitsu A64FX erratum 010001 arm64: Rename get_thread_info() arm64: Remove documentation about TIF_USEDFPU arm64: irqflags: Fix clang build warnings arm64: Enable the support of pseudo-NMIs arm64: Skip irqflags tracing for NMI in IRQs disabled context arm64: Skip preemption when exiting an NMI arm64: Handle serror in NMI context irqchip/gic-v3: Allow interrupts to be set as pseudo-NMI ...
2019-03-09Merge tag 'pci-v5.1-changes' of ↵Linus Torvalds1-1/+33
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - Use match_string() instead of reimplementing it (Andy Shevchenko) - Enable SERR# forwarding for all bridges (Bharat Kumar Gogada) - Use Latency Tolerance Reporting if already enabled by platform (Bjorn Helgaas) - Save/restore LTR info for suspend/resume (Bjorn Helgaas) - Fix DPC use of uninitialized data (Dongdong Liu) - Probe bridge window attributes only once at enumeration-time to fix device accesses during rescan (Bjorn Helgaas) - Return BAR size (not "size -1 ") from pci_size() to simplify code (Du Changbin) - Use config header type (not class code) identify bridges more reliably (Honghui Zhang) - Work around Intel Denverton incorrect Trace Hub BAR size reporting (Alexander Shishkin) - Reorder pciehp cached state/hardware state updates to avoid missed interrupts (Mika Westerberg) - Turn ibmphp semaphores into completions or mutexes (Arnd Bergmann) - Mark expected switch fall-through (Mathieu Malaterre) - Use of_node_name_eq() for node name comparisons (Rob Herring) - Add ACS and pciehp quirks for HXT SD4800 (Shunyong Yang) - Consolidate Rohm Vendor ID definitions (Andy Shevchenko) - Use u32 (not __u32) for things not exposed to userspace (Logan Gunthorpe) - Fix locking semantics of bus and slot reset interfaces (Alex Williamson) - Update PCIEPORTBUS Kconfig help text (Hou Zhiqiang) - Allow portdrv to claim subtractive decode Ports so PCIe services will work for them (Honghui Zhang) - Report PCIe links that become degraded at run-time (Alexandru Gagniuc) - Blacklist Gigabyte X299 Root Port power management to fix Thunderbolt hotplug (Mika Westerberg) - Revert runtime PM suspend/resume callbacks that broke PME on network cable plug (Mika Westerberg) - Disable Data Link State Changed interrupts to prevent wakeup immediately after suspend (Mika Westerberg) - Extend altera to support Stratix 10 (Ley Foon Tan) - Allow building altera driver on ARM64 (Ley Foon Tan) - Replace Douglas with Tom Joseph as Cadence PCI host/endpoint maintainer (Lorenzo Pieralisi) - Add DT support for R-Car RZ/G2E (R8A774C0) (Fabrizio Castro) - Add dra72x/dra74x/dra76x SoC compatible strings (Kishon Vijay Abraham I) - Enable x2 mode support for dra72x/dra74x/dra76x SoC (Kishon Vijay Abraham I) - Configure dra7xx PHY to PCIe mode (Kishon Vijay Abraham I) - Simplify dwc (remove unnecessary header includes, name variables consistently, reduce inverted logic, etc) (Gustavo Pimentel) - Add i.MX8MQ support (Andrey Smirnov) - Add message to help debug dwc MSI-X mask bit errors (Gustavo Pimentel) - Work around imx7d PCIe PLL erratum (Trent Piepho) - Don't assert qcom reset GPIO during probe (Bjorn Andersson) - Skip dwc MSI init if MSIs have been disabled (Lucas Stach) - Use memcpy_fromio()/memcpy_toio() instead of plain memcpy() in PCI endpoint framework (Wen Yang) - Add interface to discover supported endpoint features to replace a bitfield that wasn't flexible enough (Kishon Vijay Abraham I) - Implement the new supported-feature interface for designware-plat, dra7xx, rockchip, cadence (Kishon Vijay Abraham I) - Fix issues with 64-bit BAR in endpoints (Kishon Vijay Abraham I) - Add layerscape endpoint mode support (Xiaowei Bao) - Remove duplicate struct hv_vp_set in favor of struct hv_vpset (Maya Nakamura) - Rework hv_irq_unmask() to use cpumask_to_vpset() instead of open-coded reimplementation (Maya Nakamura) - Align Hyper-V struct retarget_msi_interrupt arguments (Maya Nakamura) - Fix mediatek MMIO size computation to enable full size of available MMIO space (Honghui Zhang) - Fix mediatek DMA window size computation to allow endpoint DMA access to full DRAM address range (Honghui Zhang) - Fix mvebu prefetchable BAR regression caused by common bridge emulation that assumed all bridges had prefetchable windows (Thomas Petazzoni) - Make advk_pci_bridge_emul_ops static (Wei Yongjun) - Configure MPS settings for VMD root ports (Jon Derrick) * tag 'pci-v5.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (92 commits) PCI: Update PCIEPORTBUS Kconfig help text PCI: Fix "try" semantics of bus and slot reset PCI/LINK: Report degraded links via link bandwidth notification dt-bindings: PCI: altera: Add altr,pcie-root-port-2.0 PCI: altera: Enable driver on ARM64 PCI: altera: Add Stratix 10 PCIe support PCI/PME: Fix possible use-after-free on remove PCI: aardvark: Make symbol 'advk_pci_bridge_emul_ops' static PCI: dwc: skip MSI init if MSIs have been explicitly disabled PCI: hv: Refactor hv_irq_unmask() to use cpumask_to_vpset() PCI: hv: Replace hv_vp_set with hv_vpset PCI: hv: Add __aligned(8) to struct retarget_msi_interrupt PCI: mediatek: Enlarge PCIe2AHB window size to support 4GB DRAM PCI: mediatek: Fix memory mapped IO range size computation PCI: dwc: Remove superfluous shifting in definitions PCI: dwc: Make use of GENMASK/FIELD_PREP PCI: dwc: Make use of BIT() in constant definitions PCI: dwc: Share code for dw_pcie_rd/wr_other_conf() PCI: dwc: Make use of IS_ALIGNED() PCI: imx6: Add code to request/control "pcie_aux" clock for i.MX8MQ ...
2019-03-08Merge tag 'gpio-v5.1-1' of ↵Linus Torvalds4-54/+8
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v5.1 cycle: Core changes: - The big change this time around is the irqchip handling in the qualcomm pin controllers, closely coupled with the gpiochip. This rework, in a classic fall-between-the-chairs fashion has been sidestepped for too long. The Qualcomm IRQchips using the SPMI and SSBI transport mechanisms have been rewritten to use hierarchical irqchip. This creates the base from which I intend to gradually pull support for hierarchical irqchips into the gpiolib irqchip helpers to cut down on duplicate code. We have too many hacks in the kernel because people have been working around the missing hierarchical irqchip for years, and once it was there, noone understood it for a while. We are now slowly adapting to using it. This is why this pull requests include changes to MFD, SPMI, IRQchip core and some ARM Device Trees pertaining to the Qualcomm chip family. Since Qualcomm have so many chips and such large deployments it is paramount that this platform gets this right, and now it (hopefully) does. - Core support for pull-up and pull-down configuration, also from the device tree. When a simple GPIO chip supports an "off or on" pull-up or pull-down resistor, we provide a way to set this up using machine descriptors or device tree. If more elaborate control of pull up/down (such as resistance shunt setting) is required, drivers should be phased over to use pin control. We do not yet provide a userspace ABI for this pull up-down setting but I suspect the makers are going to ask for it soon enough. PCA953x is the first user of this new API. - The GPIO mockup driver has been revamped after some discussion improving the IRQ simulator in the process. The idea is to make it possible to use the mockup for both testing and virtual prototyping, e.g. when you do not yet have a GPIO expander to play with but really want to get something to develop code around before hardware is available. It's neat. The blackbox testing usecase is currently making its way into kernelci. - ACPI GPIO core preserves non direction flags when updating flags. - A new device core helper for devm_platform_ioremap_resource() is funneled through the GPIO tree with Greg's ACK. New drivers: - TQ-Systems QTMX86 GPIO controllers (using port-mapped I/O) - Gateworks PLD GPIO driver (vaccumed up from OpenWrt) - AMD G-Series PCH (Platform Controller Hub) GPIO driver. - Fintek F81804 & F81966 subvariants. - PCA953x now supports NXP PCAL6416. Driver improvements: - IRQ support on the Nintendo Wii (Hollywood) GPIO. - get_direction() support for the MVEBU driver. - Set the right output level on SAMA5D2. - Drop the unused irq trigger setting on the Spreadtrum driver. - Wakeup support for PCA953x. - A slew of cleanups in the various Intel drivers" * tag 'gpio-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (110 commits) gpio: gpio-omap: fix level interrupt idling gpio: amd-fch: Set proper output level for direction_output x86: apuv2: remove unused variable gpio: pca953x: Use PCA_LATCH_INT platform/x86: fix PCENGINES_APU2 Kconfig warning gpio: pca953x: Fix dereference of irq data in shutdown gpio: amd-fch: Fix type error found by sparse gpio: amd-fch: Drop const from resource gpio: mxc: add check to return defer probe if clock tree NOT ready gpio: ftgpio: Register per-instance irqchip gpio: ixp4xx: Add DT bindings x86: pcengines apuv2 gpio/leds/keys platform driver gpio: AMD G-Series PCH gpio driver drivers: depend on HAS_IOMEM for devm_platform_ioremap_resource() gpio: tqmx86: Set proper output level for direction_output gpio: sprd: Change to use SoC compatible string gpio: sprd: Use SoC compatible string instead of wildcard string gpio: of: Handle both enable-gpio{,s} gpio: of: Restrict enable-gpio quirk to regulator-gpio gpio: davinci: use devm_platform_ioremap_resource() ...
2019-03-06Merge tag 'sound-5.1-rc1' of ↵Linus Torvalds3-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "We had again a busy development cycle with many new drivers as well as lots of core improvements / cleanups. Let's go for highlights: ALSA core: - PCM locking scheme was refactored for reducing a global rwlock - PCM suspend is handled in the device type PM ops now; lots of explicit calls were reduced by this action - Cleanups about PCM buffer preallocation calls - Kill NULL device object in memory allocations - Lots of procfs API cleanups ASoC core: - Support for only powering up channels that are actively being used - Cleanups / fixes of topology API ASoC drivers: - MediaTek BTCVSD for a Bluetooth radio chip, which is the first such driver we've had upstream! - Quite a few improvements to simplify the generic card drivers, especially the merge of the SCU cards into the main generic drivers - Lots of fixes for probing on Intel systems to follow more standard styles - A big refresh and cleanup of the Samsung drivers - New drivers: Asahi Kasei Microdevices AK4497, Cirrus Logic CS4341 and CS35L26, Google ChromeOS embedded controllers, Ingenic JZ4725B, MediaTek BTCVSD, MT8183 and MT6358, NXP MICFIL, Rockchip RK3328, Spreadtrum DMA controllers, Qualcomm WCD9335, Xilinx S/PDIF and PCM formatters ALSA drivers: - Improvements of Tegra HD-audio controller driver for supporting new chips - HD-audio codec quirks for ALC294 S4 resume, ASUS laptop, Chrome headset button support and Dell workstations - Improved DSD support on USB-audio - Quirk for MOTU MicroBook II USB-audio - Support for Fireface UCX support and Solid State Logic Duende Classic/Mini" * tag 'sound-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (461 commits) ALSA: usb-audio: Add quirk for MOTU MicroBook II ASoC: stm32: i2s: skip useless write in slave mode ASoC: stm32: i2s: fix race condition in irq handler ASoC: stm32: i2s: remove useless callback ASoC: stm32: i2s: fix dma configuration ASoC: stm32: i2s: fix stream count management ASoC: stm32: i2s: fix 16 bit format support ASoC: stm32: i2s: fix IRQ clearing ASoC: qcom: Kconfig: fix dependency for sdm845 ASoC: Intel: Boards: Add Maxim98373 support ASoC: rsnd: gen: fix SSI9 4/5/6/7 busif related register address ALSA: firewire-motu: fix construction of PCM frame for capture direction ALSA: bebob: use more identical mod_alias for Saffire Pro 10 I/O against Liquid Saffire 56 ALSA: hda: Extend i915 component bind timeout ASoC: wm_adsp: Improve logging messages ASoC: wm_adsp: Add support for multiple compressed buffers ASoC: wm_adsp: Refactor compress stream initialisation ASoC: wm_adsp: Reorder some functions for improved clarity ASoC: wm_adsp: Factor out stripping padding from ADSP data ASoC: cs35l36: Fix an IS_ERR() vs NULL checking bug ...
2019-03-06Merge tag 'acpi-5.1-rc1' of ↵Linus Torvalds7-23/+70
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These are ACPICA updates including ACPI 6.3 support among other things, APEI updates including the ARM Software Delegated Exception Interface (SDEI) support, ACPI EC driver fixes and cleanups and other assorted improvements. Specifics: - Update the ACPICA code in the kernel to upstream revision 20190215 including ACPI 6.3 support and more: * New predefined methods: _NBS, _NCH, _NIC, _NIH, and _NIG (Erik Schmauss). * Update of the PCC Identifier structure in PDTT (Erik Schmauss). * Support for new Generic Affinity Structure subtable in SRAT (Erik Schmauss). * New PCC operation region support (Erik Schmauss). * Support for GICC statistical profiling for MADT (Erik Schmauss). * New Error Disconnect Recover notification support (Erik Schmauss). * New PPTT Processor Structure Flags fields support (Erik Schmauss). * ACPI 6.3 HMAT updates (Erik Schmauss). * GTDT Revision 3 support (Erik Schmauss). * Legacy module-level code (MLC) support removal (Erik Schmauss). * Update/clarification of messages for control method failures (Bob Moore). * Warning on creation of a zero-length opregion (Bob Moore). * acpiexec option to dump extra info for memory leaks (Bob Moore). * More ACPI error to firmware error conversions (Bob Moore). * Debugger fix (Bob Moore). * Copyrights update (Bob Moore) - Clean up sleep states support code in ACPICA (Christoph Hellwig) - Rework in_nmi() handling in the APEI code and add suppor for the ARM Software Delegated Exception Interface (SDEI) to it (James Morse) - Fix possible out-of-bounds accesses in BERT-related core (Ross Lagerwall) - Fix the APEI code parsing HEST that includes a Deferred Machine Check subtable (Yazen Ghannam) - Use DEFINE_DEBUGFS_ATTRIBUTE for APEI-related debugfs files (YueHaibing) - Switch the APEI ERST code to the new generic UUID API (Andy Shevchenko) - Update the MAINTAINERS entry for APEI (Borislav Petkov) - Fix and clean up the ACPI EC driver (Rafael Wysocki, Zhang Rui) - Fix DMI checks handling in the ACPI backlight driver and add the "Lunch Box" chassis-type check to it (Hans de Goede) - Add support for using ACPI table overrides included in built-in initrd images (Shunyong Yang) - Update ACPI device enumeration to treat the PWM2 device as "always present" on Lenovo Yoga Book (Yauhen Kharuzhy) - Fix up the enumeration of device objects with the PRP0001 device ID (Andy Shevchenko) - Clean up PPTT parsing error messages (John Garry) - Clean up debugfs files creation handling (Greg Kroah-Hartman, Rafael Wysocki) - Clean up the ACPI DPTF Makefile (Masahiro Yamada)" * tag 'acpi-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits) ACPI / bus: Respect PRP0001 when retrieving device match data ACPICA: Update version to 20190215 ACPI/ACPICA: Trivial: fix spelling mistakes and fix whitespace formatting ACPICA: ACPI 6.3: add GTDT Revision 3 support ACPICA: ACPI 6.3: HMAT updates ACPICA: ACPI 6.3: PPTT add additional fields in Processor Structure Flags ACPICA: ACPI 6.3: add Error Disconnect Recover Notification value ACPICA: ACPI 6.3: MADT: add support for statistical profiling in GICC ACPICA: ACPI 6.3: add PCC operation region support for AML interpreter efi: cper: Fix possible out-of-bounds access ACPI: APEI: Fix possible out-of-bounds access to BERT region ACPICA: ACPI 6.3: SRAT: add Generic Affinity Structure subtable ACPICA: ACPI 6.3: Add Trigger order to PCC Identifier structure in PDTT ACPICA: ACPI 6.3: Adding predefined methods _NBS, _NCH, _NIC, _NIH, and _NIG ACPICA: Update/clarify messages for control method failures ACPICA: Debugger: Fix possible fault with the "test objects" command ACPICA: Interpreter: Emit warning for creation of a zero-length op region ACPICA: Remove legacy module-level code support ACPI / x86: Make PWM2 device always present at Lenovo Yoga Book ACPI / video: Extend chassis-type detection with a "Lunch Box" check ..
2019-03-06Merge branch 'akpm' (patches from Andrew)Linus Torvalds7-34/+31
Merge misc updates from Andrew Morton: - a few misc things - ocfs2 updates - most of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (159 commits) tools/testing/selftests/proc/proc-self-syscall.c: remove duplicate include proc: more robust bulk read test proc: test /proc/*/maps, smaps, smaps_rollup, statm proc: use seq_puts() everywhere proc: read kernel cpu stat pointer once proc: remove unused argument in proc_pid_lookup() fs/proc/thread_self.c: code cleanup for proc_setup_thread_self() fs/proc/self.c: code cleanup for proc_setup_self() proc: return exit code 4 for skipped tests mm,mremap: bail out earlier in mremap_to under map pressure mm/sparse: fix a bad comparison mm/memory.c: do_fault: avoid usage of stale vm_area_struct writeback: fix inode cgroup switching comment mm/huge_memory.c: fix "orig_pud" set but not used mm/hotplug: fix an imbalance with DEBUG_PAGEALLOC mm/memcontrol.c: fix bad line in comment mm/cma.c: cma_declare_contiguous: correct err handling mm/page_ext.c: fix an imbalance with kmemleak mm/compaction: pass pgdat to too_many_isolated() instead of zone mm: remove zone_lru_lock() function, access ->lru_lock directly ...
2019-03-06Merge tag 'armsoc-newsoc' of ↵Linus Torvalds5-0/+178
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM new SoC family support from Arnd Bergmann: "Two new SoC families are added this time. Sugaya Taichi submitted support for the Milbeaut SoC family from Socionext and explains: "SC2000 is a SoC of the Milbeaut series. equipped with a DSP optimized for computer vision. It also features advanced functionalities such as 360-degree, real-time spherical stitching with multi cameras, image stabilization for without mechanical gimbals, and rolling shutter correction. More detail is below: https://www.socionext.com/en/products/assp/milbeaut/SC2000.html" Interestingly, this one has a history dating back to older chips made by Socionext and previously Matsushita/Panasonic based on their own mn10300 CPU architecture that was removed from the kernel last year. Manivannan Sadhasivam adds support for another SoC family, this is the Bitmain BM1880 chip used in the Sophon Edge TPU developer board. The chip is intended for Deep Learning applications, and comes with dual-core Arm Cortex-A53 to run Linux as well as a RISC-V microcontroller core to control the tensor unit. For the moment, the TPU is not accessible in mainline Linux, so we treat it as a generic Arm SoC. More information is available at https://www.sophon.ai/" * tag 'armsoc-newsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: multi_v7_defconfig: add ARCH_MILBEAUT and ARCH_MILBEAUT_M10V ARM: configs: Add Milbeaut M10V defconfig ARM: dts: milbeaut: Add device tree set for the Milbeaut M10V board clocksource/drivers/timer-milbeaut: Introduce timer for Milbeaut SoCs dt-bindings: timer: Add Milbeaut M10V timer description ARM: milbeaut: Add basic support for Milbeaut m10v SoC dt-bindings: Add documentation for Milbeaut SoCs dt-bindings: arm: Add SMP enable-method for Milbeaut dt-bindings: sram: milbeaut: Add binding for Milbeaut smp-sram MAINTAINERS: Add entry for Bitmain SoC platform arm64: dts: bitmain: Add Sophon Egde board support arm64: dts: bitmain: Add BM1880 SoC support arm64: Add ARCH_BITMAIN platform dt-bindings: arm: Document Bitmain BM1880 SoC
2019-03-06Merge tag 'armsoc-defconfig' of ↵Linus Torvalds1-1/+31
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC defconfig updates from Arnd Bergmann: "We regenerated the defconfig files for samsung, shmobile, lpc18xx, lpc32xx, omap2, and nhk8815. Lots of additional drivers added on samsung and nhk8815, as well as the new pl110 driver on all machines that have it. The remaining changes are mostly to enable newly added drivers, and in case of imx8mq together with the SoC getting merged" * tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits) ARM: spear3xx_defconfig: Activate PL111 DRM driver ARM: nhk8815_defconfig: Add new options ARM: nhk8815_defconfig: Update defconfig ARM: pxa: remove CONFIG_SND_PXA2XX_AC97 in pxa_defconfig ARM: defconfig: integrator: Switch to DRM arm64: defconfig: Add IMX2+ watchdog arm64: defconfig: Enable PFUZE100 regulator arm64: defconfig: enable NXP FlexSPI driver arm64: defconfig: Add i.MX8MQ boot necessary configs arm64: defconfig: add imx8qxp support arm64: defconfig: add i.MX system controller RTC support arm64: defconfig: Enable Tegra TCU arm64: defconfig: Enable MAX8973 regulator ARM: socfpga_defconfig: enable BLK_DEV_LOOP config option ARM: defconfig: lpc32xx: enable DRM simple panel driver ARM: defconfig: lpc32xx: enable fixed voltage regulator support arm64: defconfig: Enable SUN6I Camera sensor interface arm64: defconfig: Enable I2C_GPIO ARM: omap2plus_defconfig: Update for moved options ARM: omap2plus_defconfig: Update for dropped options ...
2019-03-06Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds182-1117/+12034
Pull ARM SoC device tree updates from Arnd Bergmann: "This is a smaller update than the past few times, but with just over 500 non-merge changesets still dwarfes the rest of the SoC tree. Three new SoC platforms get added, each one a follow-up to an existing product, and added here in combination with a reference platform: - Renesas RZ/A2M (R7S9210) 32-bit Cortex-A9 Real-time imaging processor: https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rza/rza2m.html - Renesas RZ/G2E (r8a774c0) 64-bit Cortex-A53 SoC "for Rich Graphics Applications": https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rzg/rzg2e.html - NXP i.MX8QuadXPlus 64-bit Cortex-A35 SoC: https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/i.mx-applications-processors/i.mx-8-processors/i.mx-8x-family-arm-cortex-a35-3d-graphics-4k-video-dsp-error-correcting-code-on-ddr:i.MX8X These are actual commercial products we now support with an in-kernel device tree source file: - Bosch Guardian is a product made by Bosch Power Tools GmbH, based on the Texas Instruments AM335x chip - Winterland IceBoard is a Texas Instruments AM3874 based machine used in telescopes at the south pole and elsewhere, see commit d031773169df2 for some pointers: - Inspur on5263m5 is an x86 server platform with an Aspeed ast2500 baseboard management controller. This is for running on the BMC. - Zodiac Digital Tapping Unit, apparently a kind of ethernet switch used in airplanes. - Phicomm K3 is a WiFi router based on Broadcom bcm47094 - Methode Electronics uDPU FTTdp distribution point unit - X96 Max, a generic TV box based on Amlogic G12a (S905X2) - NVIDIA Shield TV (Darcy) based on Tegra210 And then there are several new SBC, evaluation, development or modular systems that we add: - Three new Rockchips rk3399 based boards: - FriendlyElec NanoPC-T4 and NanoPi M4 - Radxa ROCK Pi 4 - Five new i.MX6 family SoM modules and boards for industrial products: - Logic PD i.MX6QD SoM and evaluation baseboad - Y Soft IOTA Draco/Hydra/Ursa family boards based on i.MX6DL - Phytec phyCORE i.MX6 UltraLite SoM and evaluation module - MYIR Tech MYD-LPC4357 development based on the NXP lpc4357 microcontroller - Chameleon96, an Intel/Altera Cyclone5 based FPGA development system in 96boards form factor - Arm Fixed Virtual Platforms(FVP) Base RevC, a purely virtual platform for corresponding to the latest "fast model" - Another Raspberry Pi variant: Model 3 A+, supported both in 32-bit and 64-bit mode. - Oxalis Evalkit V100 based on NXP Layerscape LS1012a, in 96Boards enterprise form factor - Elgin RV1108 R1 development board based on 32-bit Rockchips RV1108 For already supported boards and SoCs, we often add support for new devices after merging the drivers. This time, the largest changes include updates for - STMicroelectronics stm32mp1, which was now formally launched last week - Qualcomm Snapdragon 845, a high-end phone and low-end laptop chip - Action Semi S700 - TI AM654x, their recently merged 64-bit SoC from the OMAP family - Various Amlogic Meson SoCs - Mediatek MT2712 - NVIDIA Tegra186 and Tegra210 - The ancient NXP lpc32xx family - Samsung s5pv210, used in some older mobile phones Many other chips see smaller updates and bugfixes beyond that" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (506 commits) ARM: dts: exynos: Fix max voltage for buck8 regulator on Odroid XU3/XU4 dt-bindings: net: ti: deprecate cpsw-phy-sel bindings ARM: dts: am335x: switch to use phy-gmii-sel ARM: dts: am4372: switch to use phy-gmii-sel ARM: dts: dm814x: switch to use phy-gmii-sel ARM: dts: dra7: switch to use phy-gmii-sel arch: arm: dts: kirkwood-rd88f6281: Remove disabled marvell,dsa reference ARM: dts: exynos: Add support for secondary DAI to Odroid XU4 ARM: dts: exynos: Add support for secondary DAI to Odroid XU3 ARM: dts: exynos: Disable ARM PMU on Odroid XU3-lite ARM: dts: exynos: Add stdout path property to Arndale board ARM: dts: exynos: Add minimal clkout parameters to Exynos3250 PMU ARM: dts: exynos: Enable ADC on Odroid HC1 arm64: dts: sprd: Remove wildcard compatible string arm64: dts: sprd: Add SC27XX fuel gauge device arm64: dts: sprd: Add SC2731 charger device arm64: dts: sprd: Add ADC calibration support arm64: dts: sprd: Remove PMIC INTC irq trigger type arm64: dts: rockchip: Enable tsadc device on rock960 ARM: dts: rockchip: add chosen node on veyron devices ...
2019-03-06Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-2/+7
Pull ARM SoC platform updates from Arnd Bergmann: "The APM X-Gene platform is now maintained by folks from Ampere computing that took over the product line a while ago, this gets reflected in the MAINTAINERS file. Cleanups continue on the older mach-davinci and mach-pxa platform, to get them to be more like the modern ones. For pxa, we now remove the Raumfeld platform code as it now works with device tree based booting. i.MX adds a couple new features for the i.MX7ULP SoC Mediatek gains support for a new SoC: MT7629 is a new wireless router platform, following MT7623. Aside from those, there are the usual minor cleanups and bugfixes across several platforms" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (49 commits) MAINTAINERS: Update Ampere email address usb: ohci-da8xx: remove unused callbacks from platform data ARM: davinci: da830-evm: remove legacy usb helpers ARM: davinci: omapl138-hawk: remove legacy usb helpers usb: ohci-da8xx: add vbus and overcurrent gpios ARM: davinci: da830-evm: use gpio lookup entries for usb gpios ARM: davinci: omapl138-hawk: use gpio lookup entries for usb gpios usb: ohci-da8xx: add a helper pointer to &pdev->dev usb: ohci-da8xx: add a new line after local variables arm64: meson: enable g12a clock controller MAINTAINERS: Add entry for uDPU board ARM: davinci: da850-evm: use GPIO hogs instead of the legacy API arm: mediatek: add MT7629 smp bring up code Revert "ARM: mediatek: add MT7623a smp bringup code" dt-bindings: soc: fix typo of MT8173 power dt-bindings ARM: meson: remove COMMON_CLK_AMLOGIC selection arm64: meson: remove COMMON_CLK_AMLOGIC selection ARM: lpc32xx: remove platform data of ARM PL111 LCD controller ARM: lpc32xx: remove platform data of ARM PL180 SD/MMC controller ARM: lpc32xx: Use kmemdup to replace duplicating its implementation ...
2019-03-06Merge branch 'locking-core-for-linus' of ↵Linus Torvalds5-186/+193
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: "The biggest part of this tree is the new auto-generated atomics API wrappers by Mark Rutland. The primary motivation was to allow instrumentation without uglifying the primary source code. The linecount increase comes from adding the auto-generated files to the Git space as well: include/asm-generic/atomic-instrumented.h | 1689 ++++++++++++++++-- include/asm-generic/atomic-long.h | 1174 ++++++++++--- include/linux/atomic-fallback.h | 2295 +++++++++++++++++++++++++ include/linux/atomic.h | 1241 +------------ I preferred this approach, so that the full call stack of the (already complex) locking APIs is still fully visible in 'git grep'. But if this is excessive we could certainly hide them. There's a separate build-time mechanism to determine whether the headers are out of date (they should never be stale if we do our job right). Anyway, nothing from this should be visible to regular kernel developers. Other changes: - Add support for dynamic keys, which removes a source of false positives in the workqueue code, among other things (Bart Van Assche) - Updates to tools/memory-model (Andrea Parri, Paul E. McKenney) - qspinlock, wake_q and lockdep micro-optimizations (Waiman Long) - misc other updates and enhancements" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (48 commits) locking/lockdep: Shrink struct lock_class_key locking/lockdep: Add module_param to enable consistency checks lockdep/lib/tests: Test dynamic key registration lockdep/lib/tests: Fix run_tests.sh kernel/workqueue: Use dynamic lockdep keys for workqueues locking/lockdep: Add support for dynamic keys locking/lockdep: Verify whether lock objects are small enough to be used as class keys locking/lockdep: Check data structure consistency locking/lockdep: Reuse lock chains that have been freed locking/lockdep: Fix a comment in add_chain_cache() locking/lockdep: Introduce lockdep_next_lockchain() and lock_chain_count() locking/lockdep: Reuse list entries that are no longer in use locking/lockdep: Free lock classes that are no longer in use locking/lockdep: Update two outdated comments locking/lockdep: Make it easy to detect whether or not inside a selftest locking/lockdep: Split lockdep_free_key_range() and lockdep_reset_lock() locking/lockdep: Initialize the locks_before and locks_after lists earlier locking/lockdep: Make zap_class() remove all matching lock order entries locking/lockdep: Reorder struct lock_class members locking/lockdep: Avoid that add_chain_cache() adds an invalid chain to the cache ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-21 13:20:17 +0000