summaryrefslogtreecommitdiffstats
path: root/arch/arm64
AgeCommit message (Collapse)AuthorFilesLines
2020-07-21arm64: dts: meson: add audio playback to odroid-c4Christian Hewitt1-0/+88
Add initial audio support limited to HDMI i2s. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20200718072532.8427-2-christianshewitt@gmail.com
2020-07-20arm64: dts: meson: update spifc node name on Khadas VIM3/VIM3LChristian Hewitt1-1/+1
The VIM3/VIM3L Boards use w25q128 not w25q32 - this is a cosmetic change only - the device probes fine with the current device-tree. Fixes: 0e1610e726d3 ("arm64: dts: khadas-vim3: add SPIFC controller node") Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20200718054505.4165-1-christianshewitt@gmail.com
2020-07-13arm64: dts: amlogic: Add the Ethernet "timing-adjustment" clockMartin Blumenstingl4-8/+14
Add the "timing-adjustment" clock now that we know how it is connected to the PRG_ETHERNET registers. It is used internally to generate the RGMII RX delay on the MAC side (if needed). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20200620162347.26159-1-martin.blumenstingl@googlemail.com
2020-07-13arm64: dts: meson-gx: Switch to the meson-ee-pwrc bindingsMartin Blumenstingl3-12/+20
The "amlogic,meson-gx-pwrc-vpu" binding only supports the VPU power domain, while actually there are more power domains behind that set of registers. Switch to the new bindings so we can add more power domains as needed. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20200620161211.23685-1-martin.blumenstingl@googlemail.com
2020-07-13arm64: dts: meson-khadas-vim3: add Khadas MCU nodesNeil Armstrong1-0/+23
Add the Khadas MCU node with active FAN thermal nodes for all the Khadas VIM3 variants. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Link: https://lore.kernel.org/r/20200713065931.19845-1-narmstrong@baylibre.com
2020-06-13Merge tag 'kbuild-v5.8-2' of ↵Linus Torvalds2-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - fix build rules in binderfs sample - fix build errors when Kbuild recurses to the top Makefile - covert '---help---' in Kconfig to 'help' * tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: treewide: replace '---help---' in Kconfig files with 'help' kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables samples: binderfs: really compile this sample and fix build issues
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada2-5/+5
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-12Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds13-102/+171
Pull more KVM updates from Paolo Bonzini: "The guest side of the asynchronous page fault work has been delayed to 5.9 in order to sync with Thomas's interrupt entry rework, but here's the rest of the KVM updates for this merge window. MIPS: - Loongson port PPC: - Fixes ARM: - Fixes x86: - KVM_SET_USER_MEMORY_REGION optimizations - Fixes - Selftest fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (62 commits) KVM: x86: do not pass poisoned hva to __kvm_set_memory_region KVM: selftests: fix sync_with_host() in smm_test KVM: async_pf: Inject 'page ready' event only if 'page not present' was previously injected KVM: async_pf: Cleanup kvm_setup_async_pf() kvm: i8254: remove redundant assignment to pointer s KVM: x86: respect singlestep when emulating instruction KVM: selftests: Don't probe KVM_CAP_HYPERV_ENLIGHTENED_VMCS when nested VMX is unsupported KVM: selftests: do not substitute SVM/VMX check with KVM_CAP_NESTED_STATE check KVM: nVMX: Consult only the "basic" exit reason when routing nested exit KVM: arm64: Move hyp_symbol_addr() to kvm_asm.h KVM: arm64: Synchronize sysreg state on injecting an AArch32 exception KVM: arm64: Make vcpu_cp1x() work on Big Endian hosts KVM: arm64: Remove host_cpu_context member from vcpu structure KVM: arm64: Stop sparse from moaning at __hyp_this_cpu_ptr KVM: arm64: Handle PtrAuth traps early KVM: x86: Unexport x86_fpu_cache and make it static KVM: selftests: Ignore KVM 5-level paging support for VM_MODE_PXXV48_4K KVM: arm64: Save the host's PtrAuth keys in non-preemptible context KVM: arm64: Stop save/restoring ACTLR_EL1 KVM: arm64: Add emulation for 32bit guests accessing ACTLR2 ...
2020-06-11Merge tag 'locking-urgent-2020-06-11' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull atomics rework from Thomas Gleixner: "Peter Zijlstras rework of atomics and fallbacks. This solves two problems: 1) Compilers uninline small atomic_* static inline functions which can expose them to instrumentation. 2) The instrumentation of atomic primitives was done at the architecture level while composites or fallbacks were provided at the generic level. As a result there are no uninstrumented variants of the fallbacks. Both issues were in the way of fully isolating fragile entry code pathes and especially the text poke int3 handler which is prone to an endless recursion problem when anything in that code path is about to be instrumented. This was always a problem, but got elevated due to the new batch mode updates of tracing. The solution is to mark the functions __always_inline and to flip the fallback and instrumentation so the non-instrumented variants are at the architecture level and the instrumentation is done in generic code. The latter introduces another fallback variant which will go away once all architectures have been moved over to arch_atomic_*" * tag 'locking-urgent-2020-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/atomics: Flip fallbacks and instrumentation asm-generic/atomic: Use __always_inline for fallback wrappers
2020-06-11Merge tag 'arm64-upstream' of ↵Linus Torvalds6-5/+28
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "arm64 fixes that came in during the merge window. There will probably be more to come, but it doesn't seem like it's worth me sitting on these in the meantime. - Fix SCS debug check to report max stack usage in bytes as advertised - Fix typo: CONFIG_FTRACE_WITH_REGS => CONFIG_DYNAMIC_FTRACE_WITH_REGS - Fix incorrect mask in HiSilicon L3C perf PMU driver - Fix compat vDSO compilation under some toolchain configurations - Fix false UBSAN warning from ACPI IORT parsing code - Fix booting under bootloaders that ignore TEXT_OFFSET - Annotate debug initcall function with '__init'" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: warn on incorrect placement of the kernel by the bootloader arm64: acpi: fix UBSAN warning arm64: vdso32: add CONFIG_THUMB2_COMPAT_VDSO drivers/perf: hisi: Fix wrong value for all counters enable arm64: ftrace: Change CONFIG_FTRACE_WITH_REGS to CONFIG_DYNAMIC_FTRACE_WITH_REGS arm64: debug: mark a function as __init to save some memory scs: Report SCS usage in bytes rather than number of entries
2020-06-11Merge tag 'kvmarm-fixes-5.8-1' of ↵Paolo Bonzini13-97/+171
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for Linux 5.8, take #1 * 32bit VM fixes: - Fix embarassing mapping issue between AArch32 CSSELR and AArch64 ACTLR - Add ACTLR2 support for AArch32 - Get rid of the useless ACTLR_EL1 save/restore - Fix CP14/15 accesses for AArch32 guests on BE hosts - Ensure that we don't loose any state when injecting a 32bit exception when running on a VHE host * 64bit VM fixes: - Fix PtrAuth host saving happening in preemptible contexts - Optimize PtrAuth lazy enable - Drop vcpu to cpu context pointer - Fix sparse warnings for HYP per-CPU accesses
2020-06-11arm64: warn on incorrect placement of the kernel by the bootloaderArd Biesheuvel2-1/+6
Commit cfa7ede20f133c ("arm64: set TEXT_OFFSET to 0x0 in preparation for removing it entirely") results in boot failures when booting kernels that are built without KASLR support on broken bootloaders that ignore the TEXT_OFFSET value passed via the header, and use the default of 0x80000 instead. To work around this, turn CONFIG_RELOCATABLE on by default, even if KASLR itself (CONFIG_RANDOMIZE_BASE) is turned off, and require CONFIG_EXPERT to be enabled to deviate from this. Then, emit a warning into the kernel log if we are not booting via the EFI stub (which is permitted to deviate from the placement restrictions) and the kernel base address is not placed according to the rules as laid out in Documentation/arm64/booting.rst. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20200611124330.252163-1-ardb@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2020-06-11locking/atomics: Flip fallbacks and instrumentationPeter Zijlstra1-3/+3
Currently instrumentation of atomic primitives is done at the architecture level, while composites or fallbacks are provided at the generic level. The result is that there are no uninstrumented variants of the fallbacks. Since there is now need of such variants to isolate text poke from any form of instrumentation invert this ordering. Doing this means moving the instrumentation into the generic code as well as having (for now) two variants of the fallbacks. Notes: - the various *cond_read* primitives are not proper fallbacks and got moved into linux/atomic.c. No arch_ variants are generated because the base primitives smp_cond_load*() are instrumented. - once all architectures are moved over to arch_atomic_ one of the fallback variants can be removed and some 2300 lines reclaimed. - atomic_{read,set}*() are no longer double-instrumented Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lkml.kernel.org/r/20200505134058.769149955@linutronix.de
2020-06-10Merge branch 'rwonce/rework' of ↵Linus Torvalds2-16/+20
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux Pull READ/WRITE_ONCE rework from Will Deacon: "This the READ_ONCE rework I've been working on for a while, which bumps the minimum GCC version and improves code-gen on arm64 when stack protector is enabled" [ Side note: I'm _really_ tempted to raise the minimum gcc version to 4.9, so that we can just say that we require _Generic() support. That would allow us to more cleanly handle a lot of the cases where we depend on very complex macros with 'sizeof' or __builtin_choose_expr() with __builtin_types_compatible_p() etc. This branch has a workaround for sparse not handling _Generic(), either, but that was already fixed in the sparse development branch, so it's really just gcc-4.9 that we'd require. - Linus ] * 'rwonce/rework' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux: compiler_types.h: Use unoptimized __unqual_scalar_typeof for sparse compiler_types.h: Optimize __unqual_scalar_typeof compilation time compiler.h: Enforce that READ_ONCE_NOCHECK() access size is sizeof(long) compiler-types.h: Include naked type in __pick_integer_type() match READ_ONCE: Fix comment describing 2x32-bit atomicity gcov: Remove old GCC 3.4 support arm64: barrier: Use '__unqual_scalar_typeof' for acquire/release macros locking/barriers: Use '__unqual_scalar_typeof' for load-acquire macros READ_ONCE: Drop pointer qualifiers when reading from scalar types READ_ONCE: Enforce atomicity for {READ,WRITE}_ONCE() memory accesses READ_ONCE: Simplify implementations of {READ,WRITE}_ONCE() arm64: csum: Disable KASAN for do_csum() fault_inject: Don't rely on "return value" from WRITE_ONCE() net: tls: Avoid assigning 'const' pointer to non-const pointer netfilter: Avoid assigning 'const' pointer to non-const pointer compiler/gcc: Raise minimum GCC version for kernel builds to 4.8
2020-06-10Merge tag 'clk-for-linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This time around we have four lines of diff in the core framework, removing a function that isn't used anymore. Otherwise the main new thing for the common clk framework is that it is selectable in the Kconfig language now. Hopefully this will let clk drivers and clk consumers be testable on more than the architectures that support the clk framework. The goal is to introduce some Kunit tests for the framework. Outside of the core framework we have the usual set of various driver updates and non-critical fixes. The dirstat shows that the new Baikal-T1 driver is the largest addition this time around in terms of lines of code. After that the x86 (Intel), Qualcomm, and Mediatek drivers introduce many lines to support new or upcoming SoCs. After that the dirstat shows the usual suspects working on their SoC support by fixing minor bugs, correcting data and converting some of their DT bindings to YAML. Core: - Allow the COMMON_CLK config to be selectable New Drivers: - Clk driver for Baikal-T1 SoCs - Mediatek MT6765 clock support - Support for Intel Agilex clks - Add support for X1830 and X1000 Ingenic SoC clk controllers - Add support for the new Renesas RZ/G1H (R8A7742) SoC - Add support for Qualcomm's MSM8939 Generic Clock Controller Updates: - Support IDT VersaClock 5P49V5925 - Bunch of updates for HSDK clock generation unit (CGU) driver - Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver - Enable supply regulators for GPU gdscs on Qualcomm SoCs - Add support for Si5342, Si5344 and Si5345 chips - Support custom flags in Xilinx zynq firmware - Various small fixes to the Xilinx clk driver - A single minor rounding fix for the legacy Allwinner clock support - A few patches from Abel Vesa as preparation of adding audiomix clock support on i.MX - A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and clk-pllv3 drivers - Drop dependency on ARM64 for i.MX8M clock driver, to support aarch32 mode on aarch64 hardware - A series from Peng Fan to improve i.MX8M clock drivers, using composite clock for core and bus clk slice - Set a better parent clock for flexcan on i.MX6UL to support CiA102 defined bit rates - A couple changes for EMC frequency scaling on Tegra210 - Support for CPU frequency scaling on Tegra20/Tegra30 - New clk gate for CSI test pattern generator on Tegra210 - Regression fixes for Samsung exynos542x and exynos5433 SoCs - Use of fallthrough; attribute for Samsung s3c24xx - Updates and fixup HDMI and video clocks on Meson8b - Fixup reset polarity on Meson8b - Fix GPU glitch free mux switch on Meson gx and g12 - A minor fix for the currently unused suspend/resume handling on Renesas RZ/A1 and RZ/A2 - Two more conversions of Renesas DT bindings to json-schema - Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (155 commits) clk: mediatek: Remove ifr{0,1}_cfg_regs structures clk: baikal-t1: remove redundant assignment to variable 'divider' clk: baikal-t1: fix spelling mistake "Uncompatible" -> "Incompatible" dt-bindings: clock: Add a missing include to MMP Audio Clock binding dt: Add bindings for IDT VersaClock 5P49V5925 clk: vc5: Add support for IDT VersaClock 5P49V6965 clk: Add Baikal-T1 CCU Dividers driver clk: Add Baikal-T1 CCU PLLs driver dt-bindings: clk: Add Baikal-T1 CCU Dividers binding dt-bindings: clk: Add Baikal-T1 CCU PLLs binding clk: mediatek: assign the initial value to clk_init_data of mtk_mux clk: mediatek: Add MT6765 clock support clk: mediatek: add mt6765 clock IDs dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC CLK: HSDK: CGU: add support for 148.5MHz clock CLK: HSDK: CGU: support PLL bypassing CLK: HSDK: CGU: check if PLL is bypassed first clk: clk-si5341: Add support for the Si5345 series ...
2020-06-10Merge branch 'kvm-arm64/ptrauth-fixes' into kvmarm-master/nextMarc Zyngier11-85/+111
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-06-10KVM: arm64: Move hyp_symbol_addr() to kvm_asm.hMarc Zyngier2-20/+20
Recent refactoring of the arm64 code make it awkward to have hyp_symbol_addr() in kvm_mmu.h. Instead, move it next to its main user, which is __hyp_this_cpu_ptr(). Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-06-10KVM: arm64: Synchronize sysreg state on injecting an AArch32 exceptionMarc Zyngier1-0/+28
On a VHE system, the EL1 state is left in the CPU most of the time, and only syncronized back to memory when vcpu_put() is called (most of the time on preemption). Which means that when injecting an exception, we'd better have a way to either: (1) write directly to the EL1 sysregs (2) synchronize the state back to memory, and do the changes there For an AArch64, we already do (1), so we are safe. Unfortunately, doing the same thing for AArch32 would be pretty invasive. Instead, we can easily implement (2) by calling the put/load architectural backends, and keep preemption disabled. We can then reload the state back into EL1. Cc: stable@vger.kernel.org Reported-by: James Morse <james.morse@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-06-10KVM: arm64: Make vcpu_cp1x() work on Big Endian hostsMarc Zyngier1-2/+4
AArch32 CP1x registers are overlayed on their AArch64 counterparts in the vcpu struct. This leads to an interesting problem as they are stored in their CPU-local format, and thus a CP1x register doesn't "hit" the lower 32bit portion of the AArch64 register on a BE host. To workaround this unfortunate situation, introduce a bias trick in the vcpu_cp1x() accessors which picks the correct half of the 64bit register. Cc: stable@vger.kernel.org Reported-by: James Morse <james.morse@arm.com> Tested-by: James Morse <james.morse@arm.com> Acked-by: James Morse <james.morse@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-06-10arm64: acpi: fix UBSAN warningNick Desaulniers1-2/+3
Will reported a UBSAN warning: UBSAN: null-ptr-deref in arch/arm64/kernel/smp.c:596:6 member access within null pointer of type 'struct acpi_madt_generic_interrupt' CPU: 0 PID: 0 Comm: swapper Not tainted 5.7.0-rc6-00124-g96bc42ff0a82 #1 Call trace: dump_backtrace+0x0/0x384 show_stack+0x28/0x38 dump_stack+0xec/0x174 handle_null_ptr_deref+0x134/0x174 __ubsan_handle_type_mismatch_v1+0x84/0xa4 acpi_parse_gic_cpu_interface+0x60/0xe8 acpi_parse_entries_array+0x288/0x498 acpi_table_parse_entries_array+0x178/0x1b4 acpi_table_parse_madt+0xa4/0x110 acpi_parse_and_init_cpus+0x38/0x100 smp_init_cpus+0x74/0x258 setup_arch+0x350/0x3ec start_kernel+0x98/0x6f4 This is from the use of the ACPI_OFFSET in arch/arm64/include/asm/acpi.h. Replace its use with offsetof from include/linux/stddef.h which should implement the same logic using __builtin_offsetof, so that UBSAN wont warn. Reported-by: Will Deacon <will@kernel.org> Suggested-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Jeremy Linton <jeremy.linton@arm.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/lkml/20200521100952.GA5360@willie-the-truck/ Link: https://lore.kernel.org/r/20200608203818.189423-1-ndesaulniers@google.com Signed-off-by: Will Deacon <will@kernel.org>
2020-06-10arm64: vdso32: add CONFIG_THUMB2_COMPAT_VDSONick Desaulniers2-0/+16
Allow the compat vdso (32b) to be compiled as either THUMB2 (default) or ARM. For THUMB2, the register r7 is reserved for the frame pointer, but code in arch/arm64/include/asm/vdso/compat_gettimeofday.h uses r7. Explicitly set -fomit-frame-pointer, since unwinding through interworked THUMB2 and ARM is unreliable anyways. See also how CONFIG_UNWINDER_FRAME_POINTER cannot be selected for CONFIG_THUMB2_KERNEL for ARCH=arm. This also helps toolchains that differ in their implicit value if the choice of -f{no-}omit-frame-pointer is left unspecified, to not error on the use of r7. 2019 Q4 ARM AAPCS seeks to standardize the use of r11 as the reserved frame pointer register, but no production compiler that can compile the Linux kernel currently implements this. We're actively discussing such a transition with ARM toolchain developers currently. Reported-by: Luis Lozano <llozano@google.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Manoj Gupta <manojgupta@google.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Stephen Boyd <swboyd@google.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Dave Martin <Dave.Martin@arm.com> Link: https://static.docs.arm.com/ihi0042/i/aapcs32.pdf Link: https://bugs.chromium.org/p/chromium/issues/detail?id=1084372 Link: https://lore.kernel.org/r/20200608205711.109418-1-ndesaulniers@google.com Signed-off-by: Will Deacon <will@kernel.org>
2020-06-09mmap locking API: convert mmap_sem call sites missed by coccinelleMichel Lespinasse1-7/+7
Convert the last few remaining mmap_sem rwsem calls to use the new mmap locking API. These were missed by coccinelle for some reason (I think coccinelle does not support some of the preprocessor constructs in these files ?) [akpm@linux-foundation.org: convert linux-next leftovers] [akpm@linux-foundation.org: more linux-next leftovers] [akpm@linux-foundation.org: more linux-next leftovers] Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-6-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09mmap locking API: use coccinelle to convert mmap_sem rwsem call sitesMichel Lespinasse3-10/+10
This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09mm: consolidate pte_index() and pte_offset_*() definitionsMike Rapoport4-29/+21
All architectures define pte_index() as (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1) and all architectures define pte_offset_kernel() as an entry in the array of PTEs indexed by the pte_index(). For the most architectures the pte_offset_kernel() implementation relies on the availability of pmd_page_vaddr() that converts a PMD entry value to the virtual address of the page containing PTEs array. Let's move x86 definitions of the PTE accessors to the generic place in <linux/pgtable.h> and then simply drop the respective definitions from the other architectures. The architectures that didn't provide pmd_page_vaddr() are updated to have that defined. The generic implementation of pte_offset_kernel() can be overridden by an architecture and alpha makes use of this because it has special ordering requirements for its version of pte_offset_kernel(). [rppt@linux.ibm.com: v2] Link: http://lkml.kernel.org/r/20200514170327.31389-11-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-12-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-13-rppt@kernel.org [akpm@linux-foundation.org: fix x86 warning] [sfr@canb.auug.org.au: fix powerpc build] Link: http://lkml.kernel.org/r/20200607153443.GB738695@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-10-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09mm: reorder includes after introduction of linux/pgtable.hMike Rapoport10-10/+9
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include of the latter in the middle of asm includes. Fix this up with the aid of the below script and manual adjustments here and there. import sys import re if len(sys.argv) is not 3: print "USAGE: %s <file> <header>" % (sys.argv[0]) sys.exit(1) hdr_to_move="#include <linux/%s>" % sys.argv[2] moved = False in_hdrs = False with open(sys.argv[1], "r") as f: lines = f.readlines() for _line in lines: line = _line.rstrip(' ') if line == hdr_to_move: continue if line.startswith("#include <linux/"): in_hdrs = True elif not moved and in_hdrs: moved = True print hdr_to_move print line Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09mm: introduce include/linux/pgtable.hMike Rapoport13-15/+13
The include/linux/pgtable.h is going to be the home of generic page table manipulation functions. Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and make the latter include asm/pgtable.h. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09mm: don't include asm/pgtable.h if linux/mm.h is already includedMike Rapoport7-7/+0
Patch series "mm: consolidate definitions of page table accessors", v2. The low level page table accessors (pXY_index(), pXY_offset()) are duplicated across all architectures and sometimes more than once. For instance, we have 31 definition of pgd_offset() for 25 supported architectures. Most of these definitions are actually identical and typically it boils down to, e.g. static inline unsigned long pmd_index(unsigned long address) { return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1); } static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address) { return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address); } These definitions can be shared among 90% of the arches provided XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined. For architectures that really need a custom version there is always possibility to override the generic version with the usual ifdefs magic. These patches introduce include/linux/pgtable.h that replaces include/asm-generic/pgtable.h and add the definitions of the page table accessors to the new header. This patch (of 12): The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the functions involving page table manipulations, e.g. pte_alloc() and pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h> in the files that include <linux/mm.h>. The include statements in such cases are remove with a simple loop: for f in $(git grep -l "include <linux/mm.h>") ; do sed -i -e '/include <asm\/pgtable.h>/ d' $f done Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Mike Rapoport <rppt@kernel.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09kernel: rename show_stack_loglvl() => show_stack()Dmitry Safonov1-7/+1
Now the last users of show_stack() got converted to use an explicit log level, show_stack_loglvl() can drop it's redundant suffix and become once again well known show_stack(). Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20200418201944.482088-51-dima@arista.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09arm64: add show_stack_loglvl()Dmitry Safonov1-2/+8
Currently, the log-level of show_stack() depends on a platform realization. It creates situations where the headers are printed with lower log level or higher than the stacktrace (depending on a platform or user). Furthermore, it forces the logic decision from user to an architecture side. In result, some users as sysrq/kdb/etc are doing tricks with temporary rising console_loglevel while printing their messages. And in result it not only may print unwanted messages from other CPUs, but also omit printing at all in the unlucky case where the printk() was deferred. Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier approach than introducing more printk buffers. Also, it will consolidate printings with headers. Introduce show_stack_loglvl(), that eventually will substitute show_stack(). [1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#u Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will@kernel.org> Link: http://lkml.kernel.org/r/20200418201944.482088-11-dima@arista.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09arm64: add loglvl to dump_backtrace()Dmitry Safonov3-9/+11
Currently, the log-level of show_stack() depends on a platform realization. It creates situations where the headers are printed with lower log level or higher than the stacktrace (depending on a platform or user). Furthermore, it forces the logic decision from user to an architecture side. In result, some users as sysrq/kdb/etc are doing tricks with temporary rising console_loglevel while printing their messages. And in result it not only may print unwanted messages from other CPUs, but also omit printing at all in the unlucky case where the printk() was deferred. Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier approach than introducing more printk buffers. Also, it will consolidate printings with headers. Add log level argument to dump_backtrace() as a preparation for introducing show_stack_loglvl(). [1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#u Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will@kernel.org> Link: http://lkml.kernel.org/r/20200418201944.482088-10-dima@arista.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09KVM: arm64: Remove host_cpu_context member from vcpu structureMarc Zyngier6-19/+11
For very long, we have kept this pointer back to the per-cpu host state, despite having working per-cpu accessors at EL2 for some time now. Recent investigations have shown that this pointer is easy to abuse in preemptible context, which is a sure sign that it would better be gone. Not to mention that a per-cpu pointer is faster to access at all times. Reported-by: Andrew Scull <ascull@google.com> Acked-by: Mark Rutland <mark.rutland@arm.com Reviewed-by: Andrew Scull <ascull@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-06-09KVM: arm64: Stop sparse from moaning at __hyp_this_cpu_ptrMarc Zyngier1-3/+10
Sparse complains that __hyp_this_cpu_ptr() returns something that is flagged noderef and not in the correct address space (both being the result of the __percpu annotation). Pretend that __hyp_this_cpu_ptr() knows what it is doing by forcefully casting the pointer with __kernel __force. Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-06-09KVM: arm64: Handle PtrAuth traps earlyMarc Zyngier4-38/+70
The current way we deal with PtrAuth is a bit heavy handed: - We forcefully save the host's keys on each vcpu_load() - Handling the PtrAuth trap forces us to go all the way back to the exit handling code to just set the HCR bits Overall, this is pretty cumbersome. A better approach would be to handle it the same way we deal with the FPSIMD registers: - On vcpu_load() disable PtrAuth for the guest - On first use, save the host's keys, enable PtrAuth in the guest Crucially, this can happen as a fixup, which is done very early on exit. We can then reenter the guest immediately without leaving the hypervisor role. Another thing is that it simplify the rest of the host handling: exiting all the way to the host means that the only possible outcome for this trap is to inject an UNDEF. Reviewed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-06-09KVM: arm64: Save the host's PtrAuth keys in non-preemptible contextMarc Zyngier3-24/+19
When using the PtrAuth feature in a guest, we need to save the host's keys before allowing the guest to program them. For that, we dump them in a per-CPU data structure (the so called host context). But both call sites that do this are in preemptible context, which may end up in disaster should the vcpu thread get preempted before reentering the guest. Instead, save the keys eagerly on each vcpu_load(). This has an increased overhead, but is at least safe. Cc: stable@vger.kernel.org Reviewed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-06-09KVM: arm64: Stop save/restoring ACTLR_EL1James Morse2-4/+0
KVM sets HCR_EL2.TACR via HCR_GUEST_FLAGS. This means ACTLR* accesses from the guest are always trapped, and always return the value in the sys_regs array. The guest can't change the value of these registers, so we are save restoring the reset value, which came from the host. Stop save/restoring this register. Keep the storage for this register in sys_regs[] as this is how the value is exposed to user-space, removing it would break migration. Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200529150656.7339-4-james.morse@arm.com
2020-06-09KVM: arm64: Add emulation for 32bit guests accessing ACTLR2James Morse1-0/+10
ACTLR_EL1 is a 64bit register while the 32bit ACTLR is obviously 32bit. For 32bit software, the extra bits are accessible via ACTLR2... which KVM doesn't emulate. Suggested-by: Marc Zyngier <maz@kernel.org> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200529150656.7339-3-james.morse@arm.com
2020-06-09KVM: arm64: Stop writing aarch32's CSSELR into ACTLRJames Morse1-2/+8
aarch32 has pairs of registers to access the high and low parts of 64bit registers. KVM has a union of 64bit sys_regs[] and 32bit copro[]. The 32bit accessors read the high or low part of the 64bit sys_reg[] value through the union. Both sys_reg_descs[] and cp15_regs[] list access_csselr() as the accessor for CSSELR{,_EL1}. access_csselr() is only aware of the 64bit sys_regs[], and expects r->reg to be 'CSSELR_EL1' in the enum, index 2 of the 64bit array. cp15_regs[] uses the 32bit copro[] alias of sys_regs[]. Here CSSELR is c0_CSSELR which is the same location in sys_reg[]. r->reg is 'c0_CSSELR', index 4 in the 32bit array. access_csselr() uses the 32bit r->reg value to access the 64bit array, so reads and write the wrong value. sys_regs[4], is ACTLR_EL1, which is subsequently save/restored when we enter the guest. ACTLR_EL1 is supposed to be read-only for the guest. This register only affects execution at EL1, and the host's value is restored before we return to host EL1. Convert the 32bit register index back to the 64bit version. Suggested-by: Marc Zyngier <maz@kernel.org> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200529150656.7339-2-james.morse@arm.com
2020-06-08Merge tag 'iommu-updates-v5.8' of ↵Linus Torvalds1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: "A big part of this is a change in how devices get connected to IOMMUs in the core code. It contains the change from the old add_device() / remove_device() to the new probe_device() / release_device() call-backs. As a result functionality that was previously in the IOMMU drivers has been moved to the IOMMU core code, including IOMMU group allocation for each device. The reason for this change was to get more robust allocation of default domains for the iommu groups. A couple of fixes were necessary after this was merged into the IOMMU tree, but there are no known bugs left. The last fix is applied on-top of the merge commit for the topic branches. Other than that change, we have: - Removal of the driver private domain handling in the Intel VT-d driver. This was fragile code and I am glad it is gone now. - More Intel VT-d updates from Lu Baolu: - Nested Shared Virtual Addressing (SVA) support to the Intel VT-d driver - Replacement of the Intel SVM interfaces to the common IOMMU SVA API - SVA Page Request draining support - ARM-SMMU Updates from Will: - Avoid mapping reserved MMIO space on SMMUv3, so that it can be claimed by the PMU driver - Use xarray to manage ASIDs on SMMUv3 - Reword confusing shutdown message - DT compatible string updates - Allow implementations to override the default domain type - A new IOMMU driver for the Allwinner Sun50i platform - Support for ATS gets disabled for untrusted devices (like Thunderbolt devices). This includes a PCI patch, acked by Bjorn. - Some cleanups to the AMD IOMMU driver to make more use of IOMMU core features. - Unification of some printk formats in the Intel and AMD IOMMU drivers and in the IOVA code. - Updates for DT bindings - A number of smaller fixes and cleanups. * tag 'iommu-updates-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (109 commits) iommu: Check for deferred attach in iommu_group_do_dma_attach() iommu/amd: Remove redundant devid checks iommu/amd: Store dev_data as device iommu private data iommu/amd: Merge private header files iommu/amd: Remove PD_DMA_OPS_MASK iommu/amd: Consolidate domain allocation/freeing iommu/amd: Free page-table in protection_domain_free() iommu/amd: Allocate page-table in protection_domain_init() iommu/amd: Let free_pagetable() not rely on domain->pt_root iommu/amd: Unexport get_dev_data() iommu/vt-d: Fix compile warning iommu/vt-d: Remove real DMA lookup in find_domain iommu/vt-d: Allocate domain info for real DMA sub-devices iommu/vt-d: Only clear real DMA device's context entries iommu: Remove iommu_sva_ops::mm_exit() uacce: Remove mm_exit() op iommu/sun50i: Constify sun50i_iommu_ops iommu/hyper-v: Constify hyperv_ir_domain_ops iommu/vt-d: Use pci_ats_supported() iommu/arm-smmu-v3: Use pci_ats_supported() ...
2020-06-08arm64: use asm-generic/cacheflush.hChristoph Hellwig1-41/+5
ARM64 needs almost no cache flushing routines of its own. Rely on asm-generic/cacheflush.h for the defaults. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Link: http://lkml.kernel.org/r/20200515143646.3857579-10-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-08arm64: ftrace: Change CONFIG_FTRACE_WITH_REGS to CONFIG_DYNAMIC_FTRACE_WITH_REGSJoe Perches1-1/+2
CONFIG_FTRACE_WITH_REGS does not exist as a Kconfig symbol. Fixes: 3b23e4991fb6 ("arm64: implement ftrace with regs") Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/b9b27f2233bd1fa31d72ff937beefdae0e2104e5.camel@perches.com Signed-off-by: Will Deacon <will@kernel.org>
2020-06-07Merge tag 'char-misc-5.8-rc1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the large set of char/misc driver patches for 5.8-rc1 Included in here are: - habanalabs driver updates, loads - mhi bus driver updates - extcon driver updates - clk driver updates (approved by the clock maintainer) - firmware driver updates - fpga driver updates - gnss driver updates - coresight driver updates - interconnect driver updates - parport driver updates (it's still alive!) - nvmem driver updates - soundwire driver updates - visorbus driver updates - w1 driver updates - various misc driver updates In short, loads of different driver subsystem updates along with the drivers as well. All have been in linux-next for a while with no reported issues" * tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits) habanalabs: correctly cast u64 to void* habanalabs: initialize variable to default value extcon: arizona: Fix runtime PM imbalance on error extcon: max14577: Add proper dt-compatible strings extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()' extcon: remove redundant assignment to variable idx w1: omap-hdq: print dev_err if irq flags are not cleared w1: omap-hdq: fix interrupt handling which did show spurious timeouts w1: omap-hdq: fix return value to be -1 if there is a timeout w1: omap-hdq: cleanup to add missing newline for some dev_dbg /dev/mem: Revoke mappings when a driver claims the region misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages() misc: xilinx-sdfec: cleanup return value in xsdfec_table_write() misc: xilinx-sdfec: improve get_user_pages_fast() error handling nvmem: qfprom: remove incorrect write support habanalabs: handle MMU cache invalidation timeout habanalabs: don't allow hard reset with open processes habanalabs: GAUDI does not support soft-reset habanalabs: add print for soft reset due to event habanalabs: improve MMU cache invalidation code ...
2020-06-07Merge tag 'usb-5.8-rc1' of ↵Linus Torvalds2-0/+12
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY driver updates from Greg KH: "Here are the large set of USB and PHY driver updates for 5.8-rc1. Nothing huge, just lots of little things: - USB gadget fixes and additions all over the place - new PHY drivers - PHY driver fixes and updates - XHCI driver updates - musb driver updates - more USB-serial driver ids added - various USB quirks added - thunderbolt minor updates and fixes - typec updates and additions All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (245 commits) usb: dwc3: meson-g12a: fix USB2 PHY initialization on G12A and A1 SoCs usb: dwc3: meson-g12a: fix error path when fetching the reset line fails Revert "dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings" Revert "dt-bindings: usb: qcom,dwc3: Add compatible for SC7180" Revert "dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver" USB: serial: ch341: fix lockup of devices with limited prescaler USB: serial: ch341: add basis for quirk detection CDC-ACM: heed quirk also in error handling USB: serial: option: add Telit LE910C1-EUX compositions usb: musb: Fix runtime PM imbalance on error usb: musb: jz4740: Prevent lockup when CONFIG_SMP is set usb: musb: mediatek: add reset FADDR to zero in reset interrupt handle usb: musb: use true for 'use_dma' usb: musb: start session in resume for host port usb: musb: return -ESHUTDOWN in urb when three-strikes error happened USB: serial: qcserial: add DW5816e QDL support thunderbolt: Add trivial .shutdown usb: dwc3: keystone: Turn on USB3 PHY before controller dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property dt-bindings: usb: convert keystone-usb.txt to YAML ...
2020-06-06Merge tag 'kbuild-v5.8' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - fix warnings in 'make clean' for ARCH=um, hexagon, h8300, unicore32 - ensure to rebuild all objects when the compiler is upgraded - exclude system headers from dependency tracking and fixdep processing - fix potential bit-size mismatch between the kernel and BPF user-mode helper - add the new syntax 'userprogs' to build user-space programs for the target architecture (the same arch as the kernel) - compile user-space sample code under samples/ for the target arch instead of the host arch - make headers_install fail if a CONFIG option is leaked to user-space - sanitize the output format of scripts/checkstack.pl - handle ARM 'push' instruction in scripts/checkstack.pl - error out before modpost if a module name conflict is found - error out when multiple directories are passed to M= because this feature is broken for a long time - add CONFIG_DEBUG_INFO_COMPRESSED to support compressed debug info - a lot of cleanups of modpost - dump vmlinux symbols out into vmlinux.symvers, and reuse it in the second pass of modpost - do not run the second pass of modpost if nothing in modules is updated - install modules.builtin(.modinfo) by 'make install' as well as by 'make modules_install' because it is useful even when CONFIG_MODULES=n - add new command line variables, GZIP, BZIP2, LZOP, LZMA, LZ4, and XZ to allow users to use alternatives such as pigz, pbzip2, etc. * tag 'kbuild-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (96 commits) kbuild: add variables for compression tools Makefile: install modules.builtin even if CONFIG_MODULES=n mksysmap: Fix the mismatch of '.L' symbols in System.map kbuild: doc: rename LDFLAGS to KBUILD_LDFLAGS modpost: change elf_info->size to size_t modpost: remove is_vmlinux() helper modpost: strip .o from modname before calling new_module() modpost: set have_vmlinux in new_module() modpost: remove mod->skip struct member modpost: add mod->is_vmlinux struct member modpost: remove is_vmlinux() call in check_for_{gpl_usage,unused}() modpost: remove mod->is_dot_o struct member modpost: move -d option in scripts/Makefile.modpost modpost: remove -s option modpost: remove get_next_text() and make {grab,release_}file static modpost: use read_text_file() and get_line() for reading text files modpost: avoid false-positive file open error modpost: fix potential mmap'ed file overrun in get_src_version() modpost: add read_text_file() and get_line() helpers modpost: do not call get_modinfo() for vmlinux(.o) ...
2020-06-06Merge tag 'pci-v5.8-changes' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Program MPS for RCiEP devices (Ashok Raj) - Fix pci_register_host_bridge() device_register() error handling (Rob Herring) - Fix pci_host_bridge struct device release/free handling (Rob Herring) Resource management: - Allow resizing BARs for devices on root bus (Ard Biesheuvel) Power management: - Reduce Thunderbolt resume time by working around devices that don't support DLL Link Active reporting (Mika Westerberg) - Work around a Pericom USB controller OHCI/EHCI PME# defect (Kai-Heng Feng) Virtualization: - Add ACS quirk for Intel Root Complex Integrated Endpoints (Ashok Raj) - Avoid FLR for AMD Starship USB 3.0 (Kevin Buettner) - Avoid FLR for AMD Matisse HD Audio & USB 3.0 (Marcos Scriven) Error handling: - Use only _OSC (not HEST FIRMWARE_FIRST) to determine AER ownership (Alexandru Gagniuc, Kuppuswamy Sathyanarayanan) - Reduce verbosity by logging only ACPI_NOTIFY_DISCONNECT_RECOVER events (Kuppuswamy Sathyanarayanan) - Don't enable AER by default in Kconfig (Bjorn Helgaas) Peer-to-peer DMA: - Add AMD Zen Raven and Renoir Root Ports to whitelist (Alex Deucher) ASPM: - Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges (Kai-Heng Feng) Endpoint framework: - Fix DMA channel release in test (Kunihiko Hayashi) - Add page size as argument to pci_epc_mem_init() (Lad Prabhakar) - Add support to handle multiple base for mapping outbound memory (Lad Prabhakar) Generic host bridge driver: - Support building as module (Rob Herring) - Eliminate pci_host_common_probe wrappers (Rob Herring) Amlogic Meson PCIe controller driver: - Don't use FAST_LINK_MODE to set up link (Marc Zyngier) Broadcom STB PCIe controller driver: - Disable ASPM L0s if 'aspm-no-l0s' in DT (Jim Quinlan) - Fix clk_put() error (Jim Quinlan) - Fix window register offset (Jim Quinlan) - Assert fundamental reset on initialization (Nicolas Saenz Julienne) - Add notify xHCI reset property (Nicolas Saenz Julienne) - Add init routine for Raspberry Pi 4 VL805 USB controller (Nicolas Saenz Julienne) - Sync with Raspberry Pi 4 firmware for VL805 initialization (Nicolas Saenz Julienne) Cadence PCIe controller driver: - Remove "cdns,max-outbound-regions" DT property (replaced by "ranges") (Kishon Vijay Abraham I) - Read 32-bit (not 16-bit) Vendor ID/Device ID property from DT (Kishon Vijay Abraham I) Marvell Aardvark PCIe controller driver: - Improve link training (Marek Behún) - Add PHY support (Marek Behún) - Add "phys", "max-link-speed", "reset-gpios" to dt-binding (Marek Behún) - Train link immediately after enabling training to work around detection issues with some cards (Pali Rohár) - Issue PERST via GPIO to work around detection issues (Pali Rohár) - Don't blindly enable ASPM L0s (Pali Rohár) - Replace custom macros by standard linux/pci_regs.h macros (Pali Rohár) Microsoft Hyper-V host bridge driver: - Fix probe failure path to release resource (Wei Hu) - Retry PCI bus D0 entry on invalid device state for kdump (Wei Hu) Renesas R-Car PCIe controller driver: - Fix incorrect programming of OB windows (Andrew Murray) - Add suspend/resume (Kazufumi Ikeda) - Rename pcie-rcar.c to pcie-rcar-host.c (Lad Prabhakar) - Add endpoint controller driver (Lad Prabhakar) - Fix PCIEPAMR mask calculation (Lad Prabhakar) - Add r8a77961 to DT binding (Yoshihiro Shimoda) Socionext UniPhier Pro5 controller driver: - Add endpoint controller driver (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Program outbound ATU upper limit register (Alan Mikhak) - Fix inner MSI IRQ domain registration (Marc Zyngier) Miscellaneous: - Check for platform_get_irq() failure consistently (negative return means failure) (Aman Sharma) - Fix several runtime PM get/put imbalances (Dinghao Liu) - Use flexible-array and struct_size() helpers for code cleanup (Gustavo A. R. Silva) - Update & fix issues in bridge emulation of PCIe registers (Jon Derrick) - Add macros for bridge window names (PCI_BRIDGE_IO_WINDOW, etc) (Krzysztof Wilczyński) - Work around Intel PCH MROMs that have invalid BARs (Xiaochun Lee)" * tag 'pci-v5.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (100 commits) PCI: uniphier: Add Socionext UniPhier Pro5 PCIe endpoint controller driver PCI: Add ACS quirk for Intel Root Complex Integrated Endpoints PCI/DPC: Print IRQ number used by port PCI/AER: Use "aer" variable for capability offset PCI/AER: Remove redundant dev->aer_cap checks PCI/AER: Remove redundant pci_is_pcie() checks PCI/AER: Remove HEST/FIRMWARE_FIRST parsing for AER ownership PCI: tegra: Fix runtime PM imbalance on error PCI: vmd: Filter resource type bits from shadow register PCI: tegra194: Fix runtime PM imbalance on error dt-bindings: PCI: Add UniPhier PCIe endpoint controller description PCI: hv: Use struct_size() helper PCI: Rename _DSM constants to align with spec PCI: Avoid FLR for AMD Starship USB 3.0 PCI: Avoid FLR for AMD Matisse HD Audio & USB 3.0 x86/PCI: Drop unused xen_register_pirq() gsi_override parameter PCI: dwc: Use private data pointer of "struct irq_domain" to get pcie_port PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link PCI: dwc: Fix inner MSI IRQ domain registration PCI: dwc: pci-dra7xx: Use devm_platform_ioremap_resource_byname() ...
2020-06-05Merge tag 'core_core_updates_for_5.8' of ↵Linus Torvalds1-1/+22
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull READ_IMPLIES_EXEC changes from Borislav Petkov: "Split the old READ_IMPLIES_EXEC workaround from executable PT_GNU_STACK now that toolchains long support PT_GNU_STACK marking and there's no need anymore to force modern programs into having all its user mappings executable instead of only the stack and the PROT_EXEC ones. Disable that automatic READ_IMPLIES_EXEC forcing on x86-64 and arm64. Add tables documenting how READ_IMPLIES_EXEC is handled on x86-64, arm and arm64. By Kees Cook" * tag 'core_core_updates_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: arm64/elf: Disable automatic READ_IMPLIES_EXEC for 64-bit address spaces arm32/64/elf: Split READ_IMPLIES_EXEC from executable PT_GNU_STACK arm32/64/elf: Add tables to document READ_IMPLIES_EXEC x86/elf: Disable automatic READ_IMPLIES_EXEC on 64-bit x86/elf: Split READ_IMPLIES_EXEC from executable PT_GNU_STACK x86/elf: Add table to document READ_IMPLIES_EXEC
2020-06-04Merge tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds226-2053/+12715
Pull ARM devicetree updates from Arnd Bergmann: "This is the set of device tree changes, mostly covering new hardware support, with 577 patches touching a little over 500 files. There are five new Arm SoCs supported in this release, all of them for existing SoC families: - Realtek RTD1195, RTD1395 and RTD1619 -- three SoCs used in both NAS devices and Android Set-top-box designs, along with the "Horseradish", "Lion Skin" and "Mjolnir" reference platforms; the Mele X1000 and Xnano X5 set-top-boxes and the Banana Pi BPi-M4 single-board computer. - Renesas RZ/G1H (r8a7742) -- a high-end 32-bit industrial SoC and the iW-RainboW-G21D-Qseven-RZG1H board/SoM - Rockchips RK3326 -- low-end 64-bit SoC along with the Odroid-GO Advance game console Newly added machines on already supported SoCs are: - AMLogic S905D based Smartlabs SML-5442TW TV box - AMLogic S905X3 based ODROID-C4 SBC - AMLogic S922XH based Beelink GT-King Pro TV box - Allwinner A20 based Olimex A20-OLinuXino-LIME-eMMC SBC - Aspeed ast2500 based BMCs in Facebook x86 "Yosemite V2" and YADRO OpenPower P9 "Nicole" - Marvell Kirkwood based Check Point L-50 router - Mediatek MT8173 based Elm/Hana Chromebook laptops - Microchip SAMA5D2 "Industrial Connectivity Platform" reference board - NXP i.MX8m based Beacon i.MX8m-Mini SoM development kit - Octavo OSDMP15x based Linux Automation MC-1 development board - Qualcomm SDM630 based Xiaomi Redmi Note 7 phone - Realtek RTD1295 based Xnano X5 TV Box - STMicroelectronics STM32MP1 based Stinger96 single-board computer and IoT Box - Samsung Exynos4210 based based Samsung Galaxy S2 phone - Socionext Uniphier based Akebi96 SBC - TI Keystone based K2G Evaluation board - TI am5729 based Beaglebone-AI development board Include device descriptions for additional hardware support in existing SoCs and machines based on all major SoC platforms: - AMlogic Meson - Allwinner sunxi - Arm Juno/VFP/Vexpress/Integrator - Broadcom bcm283x/bcm2711 - Hisilicon hi6220 - Marvell EBU - Mediatek MT27xx, MT76xx, MT81xx and MT67xx - Microchip SAMA5D2 - NXP i.MX6/i.MX7/i.MX8 and Layerscape - Nvidia Tegra - Qualcomm Snapdragon - Renesas r8a77961, r8a7791 - Rockchips RK32xx/RK33xx - ST-Ericsson ux500 - STMicroelectronics SMT32 - Samsung Exynos and S5PV210 - Socionext Uniphier - TI OMAP5/DRA7 and Keystone" * tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (564 commits) ARM: dts: keystone: Rename "msmram" node to "sram" arm: dts: mt2712: add uart APDMA to device tree arm64: dts: mt8183: add mmc node arm64: dts: mt2712: add ethernet device node arm64: tegra: Make the RTC a wakeup source on Jetson Nano and TX1 ARM: dts: mmp3: Add the fifth SD HCI ARM: dts: berlin*: Fix up the SDHCI node names ARM: dts: mmp3: Fix USB & USB PHY node names ARM: dts: mmp3: Fix L2 cache controller node name ARM: dts: mmp*: Fix up encoding of the /rtc interrupts property ARM: dts: pxa*: Fix up encoding of the /rtc interrupts property ARM: dts: pxa910: Fix the gpio interrupt cell number ARM: dts: pxa3xx: Fix up encoding of the /gpio interrupts property ARM: dts: pxa168: Fix the gpio interrupt cell number ARM: dts: pxa168: Add missing address/size cells to i2c nodes ARM: dts: dove: Fix interrupt controller node name ARM: dts: kirkwood: Fix interrupt controller node name arm64: dts: Add SC9863A emmc and sd card nodes arm64: dts: Add SC9863A clock nodes arm64: dts: mt6358: add PMIC MT6358 related nodes ...
2020-06-04Merge tag 'arm-drivers-5.8' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM/SoC driver updates from Arnd Bergmann: "These are updates to SoC specific drivers that did not have another subsystem maintainer tree to go through for some reason: - Some bus and memory drivers for the MIPS P5600 based Baikal-T1 SoC that is getting added through the MIPS tree. - There are new soc_device identification drivers for TI K3, Qualcomm MSM8939 - New reset controller drivers for NXP i.MX8MP, Renesas RZ/G1H, and Hisilicon hi6220 - The SCMI firmware interface can now work across ARM SMC/HVC as a transport. - Mediatek platforms now use a new driver for their "MMSYS" hardware block that controls clocks and some other aspects in behalf of the media and gpu drivers. - Some Tegra processors have improved power management support, including getting woken up by the PMIC and cluster power down during idle. - A new v4l staging driver for Tegra is added. - Cleanups and minor bugfixes for TI, NXP, Hisilicon, Mediatek, and Tegra" * tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (155 commits) clk: sprd: fix compile-testing bus: bt1-axi: Build the driver into the kernel bus: bt1-apb: Build the driver into the kernel bus: bt1-axi: Use sysfs_streq instead of strncmp bus: bt1-axi: Optimize the return points in the driver bus: bt1-apb: Use sysfs_streq instead of strncmp bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method bus: bt1-apb: Fix show/store callback identations bus: bt1-apb: Include linux/io.h dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding memory: Add Baikal-T1 L2-cache Control Block driver bus: Add Baikal-T1 APB-bus driver bus: Add Baikal-T1 AXI-bus driver dt-bindings: bus: Add Baikal-T1 APB-bus binding dt-bindings: bus: Add Baikal-T1 AXI-bus binding staging: tegra-video: fix V4L2 dependency tee: fix crypto select drivers: soc: ti: knav_qmss_queue: Make knav_gp_range_ops static soc: ti: add k3 platforms chipid module driver dt-bindings: soc: ti: add binding for k3 platforms chipid module ...
2020-06-04Merge tag 'arm-defconfig-5.8' of ↵Linus Torvalds1-1/+17
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM defconfig updates from Arnd Bergmann: "These are the usual updates to arm/arm64 defconfig files, enabling newly added drivers and addressing changes to Kconfig files" * tag 'arm-defconfig-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (22 commits) ARM: imx_v6_v7_defconfig: extend RN5T618 PMIC family support arm64: defconfig: enable Qualcomm IPA and RMNet modules arm64: defconfig: Add LEDS_TRIGGER_TIMER arm64: defconfig: Enable UACCE/PCI PASID/SEC2/HPRE configs arm64: defconfig: Enable Qualcomm SC7180 pinctrl and gcc arm64: defconfig: Remove QCOM_GLINK_SSR ARM: multi_v7_defconfig: Enable r8a7742 SoC ARM: shmobile: defconfig: Enable r8a7742 SoC arm64: defconfig: enable meson gx audio as module arm64: defconfig: Enable SM8250 GCC driver ARM: defconfig: u8500: Enable new drivers for ux500 arm64: defconfig: Enable CONFIG_PINCTRL_IMX8DXL by default arm64: configs: Enable sun50i cpufreq nvmem ARM: shmobile: defconfig: Refresh for v5.7-rc1 ARM: defconfig: u8500: Enable new drivers for samsung-golden ARM: configs: sunxi: Add sun8i analog codec arm64: defconfig: Enable Qualcomm CAMCC, CAMSS and CCI drivers ARM: configs: at91: sama5: enable MCP16502 regulator ARM: configs: at91: sama5: enable SAMA5D2_PIOBU ARM: exynos_defconfig: Compile MAC80211/CFG80211 as modules ...
2020-06-04Merge tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-3/+0
Pull ARM SoC updates from Arnd Bergmann: "One new platform gets added, the Realtek RTD1195, which is an older Cortex-a7 based relative of the RTD12xx chips that are already supported in arch/arm64. The platform may also be extended to support running 32-bit kernels on those 64-bit chips for memory-constrained machines. In the Renesas shmobile platform, we gain support for "RZ/G1H" or R8A7742, an eight-core chip based on Cortex-A15 and Cortex-A7 cores, originally released in 2016 as one of the last high-end 32-bit designs. There is ongoing cleanup for the integrator, tegra, imx, and omap2 platforms, with integrator getting very close to the goal of having zero code in arch/arm/, and omap2 moving more of the chip specifics from old board code into device tree files. The Versatile Express platform is made more modular, with built-in drivers now becoming loadable modules. This is part of a greater effort for the Android OS to have a common kernel binary for all platforms and any platform specific code in loadable modules. The PXA platform drops support for Compulab's pxa2xx boards that had rather unusual flash and PCI drivers but no known users remaining. All device drivers specific to those boards can now get removed as well. Across platforms, there is ongoing cleanup, with Geert and Rob revisiting some a lot of Kconfig options" * tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits) ARM: omap2: fix omap5_realtime_timer_init definition ARM: zynq: Don't select CONFIG_ICST ARM: OMAP2+: Fix regression for using local timer on non-SMP SoCs clk: versatile: Fix kconfig dependency on COMMON_CLK_VERSATILE ARM: davinci: fix build failure without I2C power: reset: vexpress: fix build issue power: vexpress: cleanup: use builtin_platform_driver power: vexpress: add suppress_bind_attrs to true Revert "ARM: vexpress: Don't select VEXPRESS_CONFIG" MAINTAINERS: pxa: remove Compulab arm/pxa support ARM: pxa: remove Compulab pxa2xx boards bus: arm-integrator-lm: Fix return value check in integrator_ap_lm_probe() soc: imx: move cpu code to drivers/soc/imx ARM: imx: move cpu definitions into a header ARM: imx: use device_initcall for imx_soc_device_init ARM: imx: pcm037: make pcm970_sja1000_platform_data static bus: ti-sysc: Timers no longer need legacy quirk handling ARM: OMAP2+: Drop old timer code for dmtimer and 32k counter ARM: dts: Configure system timers for omap2 ARM: dts: Configure system timers for ti81xx ...
2020-06-04Merge branch 'akpm' (patches from Andrew)Linus Torvalds13-104/+369
Merge yet more updates from Andrew Morton: - More MM work. 100ish more to go. Mike Rapoport's "mm: remove __ARCH_HAS_5LEVEL_HACK" series should fix the current ppc issue - Various other little subsystems * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (127 commits) lib/ubsan.c: fix gcc-10 warnings tools/testing/selftests/vm: remove duplicate headers selftests: vm: pkeys: fix multilib builds for x86 selftests: vm: pkeys: use the correct page size on powerpc selftests/vm/pkeys: override access right definitions on powerpc selftests/vm/pkeys: test correct behaviour of pkey-0 selftests/vm/pkeys: introduce a sub-page allocator selftests/vm/pkeys: detect write violation on a mapped access-denied-key page selftests/vm/pkeys: associate key on a mapped page and detect write violation selftests/vm/pkeys: associate key on a mapped page and detect access violation selftests/vm/pkeys: improve checks to determine pkey support selftests/vm/pkeys: fix assertion in test_pkey_alloc_exhaust() selftests/vm/pkeys: fix number of reserved powerpc pkeys selftests/vm/pkeys: introduce powerpc support selftests/vm/pkeys: introduce generic pkey abstractions selftests: vm: pkeys: use the correct huge page size selftests/vm/pkeys: fix alloc_random_pkey() to make it really random selftests/vm/pkeys: fix assertion in pkey_disable_set/clear() selftests/vm/pkeys: fix pkey_disable_clear() selftests: vm: pkeys: add helpers for pkey bits ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-12 21:22:44 +0000