summaryrefslogtreecommitdiffstats
path: root/arch/arm64
AgeCommit message (Collapse)AuthorFilesLines
2021-03-10arm64: mte: Map hotplugged memory as Normal TaggedCatalin Marinas3-2/+5
In a system supporting MTE, the linear map must allow reading/writing allocation tags by setting the memory type as Normal Tagged. Currently, this is only handled for memory present at boot. Hotplugged memory uses Normal non-Tagged memory. Introduce pgprot_mhp() for hotplugged memory and use it in add_memory_resource(). The arm64 code maps pgprot_mhp() to pgprot_tagged(). Note that ZONE_DEVICE memory should not be mapped as Tagged and therefore setting the memory type in arch_add_memory() is not feasible. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Fixes: 0178dc761368 ("arm64: mte: Use Normal Tagged attributes for the linear map") Reported-by: Patrick Daly <pdaly@codeaurora.org> Tested-by: Patrick Daly <pdaly@codeaurora.org> Link: https://lore.kernel.org/r/1614745263-27827-1-git-send-email-pdaly@codeaurora.org Cc: <stable@vger.kernel.org> # 5.10.x Cc: Will Deacon <will@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: David Hildenbrand <david@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Link: https://lore.kernel.org/r/20210309122601.5543-1-catalin.marinas@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2021-03-09KVM: arm64: Ensure I-cache isolation between vcpus of a same VMMarc Zyngier5-8/+15
It recently became apparent that the ARMv8 architecture has interesting rules regarding attributes being used when fetching instructions if the MMU is off at Stage-1. In this situation, the CPU is allowed to fetch from the PoC and allocate into the I-cache (unless the memory is mapped with the XN attribute at Stage-2). If we transpose this to vcpus sharing a single physical CPU, it is possible for a vcpu running with its MMU off to influence another vcpu running with its MMU on, as the latter is expected to fetch from the PoU (and self-patching code doesn't flush below that level). In order to solve this, reuse the vcpu-private TLB invalidation code to apply the same policy to the I-cache, nuking it every time the vcpu runs on a physical CPU that ran another vcpu of the same VM in the past. This involve renaming __kvm_tlb_flush_local_vmid() to __kvm_flush_cpu_context(), and inserting a local i-cache invalidation there. Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Will Deacon <will@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20210303164505.68492-1-maz@kernel.org
2021-03-09arm64: kasan: fix page_alloc tagging with DEBUG_VIRTUALAndrey Konovalov1-0/+5
When CONFIG_DEBUG_VIRTUAL is enabled, the default page_to_virt() macro implementation from include/linux/mm.h is used. That definition doesn't account for KASAN tags, which leads to no tags on page_alloc allocations. Provide an arm64-specific definition for page_to_virt() when CONFIG_DEBUG_VIRTUAL is enabled that takes care of KASAN tags. Fixes: 2813b9c02962 ("kasan, mm, arm64: tag non slab memory allocated via pagealloc") Cc: <stable@vger.kernel.org> Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/4b55b35202706223d3118230701c6a59749d9b72.1615219501.git.andreyknvl@google.com Signed-off-by: Will Deacon <will@kernel.org>
2021-03-09KVM: arm64: Don't use cbz/adr with external symbolsSami Tolvanen1-2/+4
allmodconfig + CONFIG_LTO_CLANG_THIN=y fails to build due to following linker errors: ld.lld: error: irqbypass.c:(function __guest_enter: .text+0x21CC): relocation R_AARCH64_CONDBR19 out of range: 2031220 is not in [-1048576, 1048575]; references hyp_panic >>> defined in vmlinux.o ld.lld: error: irqbypass.c:(function __guest_enter: .text+0x21E0): relocation R_AARCH64_ADR_PREL_LO21 out of range: 2031200 is not in [-1048576, 1048575]; references hyp_panic >>> defined in vmlinux.o This is because with LTO, the compiler ends up placing hyp_panic() more than 1MB away from __guest_enter(). Use an unconditional branch and adr_l instead to fix the issue. Link: https://github.com/ClangBuiltLinux/linux/issues/1317 Reported-by: Nathan Chancellor <nathan@kernel.org> Suggested-by: Marc Zyngier <maz@kernel.org> Suggested-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Will Deacon <will@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210305202124.3768527-1-samitolvanen@google.com
2021-03-08arm64/mm: Reorganize pfn_valid()Anshuman Khandual1-5/+16
There are multiple instances of pfn_to_section_nr() and __pfn_to_section() when CONFIG_SPARSEMEM is enabled. This can be optimized if memory section is fetched earlier. This replaces the open coded PFN and ADDR conversion with PFN_PHYS() and PHYS_PFN() helpers. While there, also add a comment. This does not cause any functional change. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/1614921898-4099-3-git-send-email-anshuman.khandual@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2021-03-08arm64/mm: Fix pfn_valid() for ZONE_DEVICE based memoryAnshuman Khandual1-0/+12
pfn_valid() validates a pfn but basically it checks for a valid struct page backing for that pfn. It should always return positive for memory ranges backed with struct page mapping. But currently pfn_valid() fails for all ZONE_DEVICE based memory types even though they have struct page mapping. pfn_valid() asserts that there is a memblock entry for a given pfn without MEMBLOCK_NOMAP flag being set. The problem with ZONE_DEVICE based memory is that they do not have memblock entries. Hence memblock_is_map_memory() will invariably fail via memblock_search() for a ZONE_DEVICE based address. This eventually fails pfn_valid() which is wrong. memblock_is_map_memory() needs to be skipped for such memory ranges. As ZONE_DEVICE memory gets hotplugged into the system via memremap_pages() called from a driver, their respective memory sections will not have SECTION_IS_EARLY set. Normal hotplug memory will never have MEMBLOCK_NOMAP set in their memblock regions. Because the flag MEMBLOCK_NOMAP was specifically designed and set for firmware reserved memory regions. memblock_is_map_memory() can just be skipped as its always going to be positive and that will be an optimization for the normal hotplug memory. Like ZONE_DEVICE based memory, all normal hotplugged memory too will not have SECTION_IS_EARLY set for their sections Skipping memblock_is_map_memory() for all non early memory sections would fix pfn_valid() problem for ZONE_DEVICE based memory and also improve its performance for normal hotplug memory as well. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Acked-by: David Hildenbrand <david@redhat.com> Fixes: 73b20c84d42d ("arm64: mm: implement pte_devmap support") Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/1614921898-4099-2-git-send-email-anshuman.khandual@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2021-03-08arm64/mm: Drop THP conditionality from FORCE_MAX_ZONEORDERAnshuman Khandual1-2/+2
Currently without THP being enabled, MAX_ORDER via FORCE_MAX_ZONEORDER gets reduced to 11, which falls below HUGETLB_PAGE_ORDER for certain 16K and 64K page size configurations. This is problematic which throws up the following warning during boot as pageblock_order via HUGETLB_PAGE_ORDER order exceeds MAX_ORDER. WARNING: CPU: 7 PID: 127 at mm/vmstat.c:1092 __fragmentation_index+0x58/0x70 Modules linked in: CPU: 7 PID: 127 Comm: kswapd0 Not tainted 5.12.0-rc1-00005-g0221e3101a1 #237 Hardware name: linux,dummy-virt (DT) pstate: 20400005 (nzCv daif +PAN -UAO -TCO BTYPE=--) pc : __fragmentation_index+0x58/0x70 lr : fragmentation_index+0x88/0xa8 sp : ffff800016ccfc00 x29: ffff800016ccfc00 x28: 0000000000000000 x27: ffff800011fd4000 x26: 0000000000000002 x25: ffff800016ccfda0 x24: 0000000000000002 x23: 0000000000000640 x22: ffff0005ffcb5b18 x21: 0000000000000002 x20: 000000000000000d x19: ffff0005ffcb3980 x18: 0000000000000004 x17: 0000000000000001 x16: 0000000000000019 x15: ffff800011ca7fb8 x14: 00000000000002b3 x13: 0000000000000000 x12: 00000000000005e0 x11: 0000000000000003 x10: 0000000000000080 x9 : ffff800011c93948 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000007000 x5 : 0000000000007944 x4 : 0000000000000032 x3 : 000000000000001c x2 : 000000000000000b x1 : ffff800016ccfc10 x0 : 000000000000000d Call trace: __fragmentation_index+0x58/0x70 compaction_suitable+0x58/0x78 wakeup_kcompactd+0x8c/0xd8 balance_pgdat+0x570/0x5d0 kswapd+0x1e0/0x388 kthread+0x154/0x158 ret_from_fork+0x10/0x30 This solves the problem via keeping FORCE_MAX_ZONEORDER unchanged with or without THP on 16K and 64K page size configurations, making sure that the HUGETLB_PAGE_ORDER (and pageblock_order) would never exceed MAX_ORDER. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/1614597914-28565-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2021-03-08arm64/mm: Drop redundant ARCH_WANT_HUGE_PMD_SHAREAnshuman Khandual1-2/+0
There is already an ARCH_WANT_HUGE_PMD_SHARE which is being selected for applicable configurations. Hence just drop the other redundant entry. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Link: https://lore.kernel.org/r/1614575192-21307-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2021-03-08arm64: Drop support for CMDLINE_EXTENDWill Deacon2-10/+1
The documented behaviour for CMDLINE_EXTEND is that the arguments from the bootloader are appended to the built-in kernel command line. This also matches the option parsing behaviour for the EFI stub and early ID register overrides. Bizarrely, the fdt behaviour is the other way around: appending the built-in command line to the bootloader arguments, resulting in a command-line that doesn't necessarily line-up with the parsing order and definitely doesn't line-up with the documented behaviour. As it turns out, there is a proposal [1] to replace CMDLINE_EXTEND with CMDLINE_PREPEND and CMDLINE_APPEND options which should hopefully make the intended behaviour much clearer. While we wait for those to land, drop CMDLINE_EXTEND for now as there appears to be little enthusiasm for changing the current FDT behaviour. [1] https://lore.kernel.org/lkml/20190319232448.45964-2-danielwa@cisco.com/ Cc: Max Uvarov <muvarov@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Doug Anderson <dianders@chromium.org> Cc: Tyler Hicks <tyhicks@linux.microsoft.com> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/CAL_JsqJX=TCCs7=gg486r9TN4NYscMTCLNfqJF9crskKPq-bTg@mail.gmail.com Link: https://lore.kernel.org/r/20210303134927.18975-3-will@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2021-03-08arm64: cpufeatures: Fix handling of CONFIG_CMDLINE for idreg overridesWill Deacon1-19/+25
The built-in kernel commandline (CONFIG_CMDLINE) can be configured in three different ways: 1. CMDLINE_FORCE: Use CONFIG_CMDLINE instead of any bootloader args 2. CMDLINE_EXTEND: Append the bootloader args to CONFIG_CMDLINE 3. CMDLINE_FROM_BOOTLOADER: Only use CONFIG_CMDLINE if there aren't any bootloader args. The early cmdline parsing to detect idreg overrides gets (2) and (3) slightly wrong: in the case of (2) the bootloader args are parsed first and in the case of (3) the CMDLINE is always parsed. Fix these issues by moving the bootargs parsing out into a helper function and following the same logic as that used by the EFI stub. Reviewed-by: Marc Zyngier <maz@kernel.org> Fixes: 33200303553d ("arm64: cpufeature: Add an early command-line cpufeature override facility") Link: https://lore.kernel.org/r/20210303134927.18975-2-will@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2021-03-06KVM: arm64: Fix range alignment when walking page tablesJia He1-0/+1
When walking the page tables at a given level, and if the start address for the range isn't aligned for that level, we propagate the misalignment on each iteration at that level. This results in the walker ignoring a number of entries (depending on the original misalignment) on each subsequent iteration. Properly aligning the address before the next iteration addresses this issue. Cc: stable@vger.kernel.org Reported-by: Howard Zhang <Howard.Zhang@arm.com> Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Jia He <justin.he@arm.com> Fixes: b1e57de62cfb ("KVM: arm64: Add stand-alone page-table walker infrastructure") [maz: rewrite commit message] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210303024225.2591-1-justin.he@arm.com Message-Id: <20210305185254.3730990-9-maz@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-06KVM: arm64: Workaround firmware wrongly advertising GICv2-on-v3 compatibilityMarc Zyngier2-4/+39
It looks like we have broken firmware out there that wrongly advertises a GICv2 compatibility interface, despite the CPUs not being able to deal with it. To work around this, check that the CPU initialising KVM is actually able to switch to MMIO instead of system registers, and use that as a precondition to enable GICv2 compatibility in KVM. Note that the detection happens on a single CPU. If the firmware is lying *and* that the CPUs are asymetric, all hope is lost anyway. Reported-by: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com> Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Message-Id: <20210305185254.3730990-8-maz@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-06KVM: arm64: Rename __vgic_v3_get_ich_vtr_el2() to __vgic_v3_get_gic_config()Marc Zyngier4-7/+14
As we are about to report a bit more information to the rest of the kernel, rename __vgic_v3_get_ich_vtr_el2() to the more explicit __vgic_v3_get_gic_config(). No functional change. Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Message-Id: <20210305185254.3730990-7-maz@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-06KVM: arm64: Don't access PMSELR_EL0/PMUSERENR_EL0 when no PMU is availableMarc Zyngier2-3/+9
When running under a nesting hypervisor, it isn't guaranteed that the virtual HW will include a PMU. In which case, let's not try to access the PMU registers in the world switch, as that'd be deadly. Reported-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com> Link: https://lore.kernel.org/r/20210209114844.3278746-3-maz@kernel.org Message-Id: <20210305185254.3730990-6-maz@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-06KVM: arm64: Turn kvm_arm_support_pmu_v3() into a static keyMarc Zyngier2-10/+10
We currently find out about the presence of a HW PMU (or the handling of that PMU by perf, which amounts to the same thing) in a fairly roundabout way, by checking the number of counters available to perf. That's good enough for now, but we will soon need to find about about that on paths where perf is out of reach (in the world switch). Instead, let's turn kvm_arm_support_pmu_v3() into a static key. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com> Link: https://lore.kernel.org/r/20210209114844.3278746-2-maz@kernel.org Message-Id: <20210305185254.3730990-5-maz@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-06KVM: arm64: Fix nVHE hyp panic host context restoreAndrew Scull3-10/+11
When panicking from the nVHE hyp and restoring the host context, x29 is expected to hold a pointer to the host context. This wasn't being done so fix it to make sure there's a valid pointer the host context being used. Rather than passing a boolean indicating whether or not the host context should be restored, instead pass the pointer to the host context. NULL is passed to indicate that no context should be restored. Fixes: a2e102e20fd6 ("KVM: arm64: nVHE: Handle hyp panics") Cc: stable@vger.kernel.org Signed-off-by: Andrew Scull <ascull@google.com> [maz: partial rewrite to fit 5.12-rc1] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210219122406.1337626-1-ascull@google.com Message-Id: <20210305185254.3730990-4-maz@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-06KVM: arm64: Avoid corrupting vCPU context register in guest exitWill Deacon1-1/+1
Commit 7db21530479f ("KVM: arm64: Restore hyp when panicking in guest context") tracks the currently running vCPU, clearing the pointer to NULL on exit from a guest. Unfortunately, the use of 'set_loaded_vcpu' clobbers x1 to point at the kvm_hyp_ctxt instead of the vCPU context, causing the subsequent RAS code to go off into the weeds when it saves the DISR assuming that the CPU context is embedded in a struct vCPU. Leave x1 alone and use x3 as a temporary register instead when clearing the vCPU on the guest exit path. Cc: Marc Zyngier <maz@kernel.org> Cc: Andrew Scull <ascull@google.com> Cc: <stable@vger.kernel.org> Fixes: 7db21530479f ("KVM: arm64: Restore hyp when panicking in guest context") Suggested-by: Quentin Perret <qperret@google.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210226181211.14542-1-will@kernel.org Message-Id: <20210305185254.3730990-3-maz@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-06KVM: arm64: nvhe: Save the SPE context earlySuzuki K Poulose3-3/+25
The nVHE KVM hyp drains and disables the SPE buffer, before entering the guest, as the EL1&0 translation regime is going to be loaded with that of the guest. But this operation is performed way too late, because : - The owning translation regime of the SPE buffer is transferred to EL2. (MDCR_EL2_E2PB == 0) - The guest Stage1 is loaded. Thus the flush could use the host EL1 virtual address, but use the EL2 translations instead of host EL1, for writing out any cached data. Fix this by moving the SPE buffer handling early enough. The restore path is doing the right thing. Fixes: 014c4c77aad7 ("KVM: arm64: Improve debug register save/restore flow") Cc: stable@vger.kernel.org Cc: Christoffer Dall <christoffer.dall@arm.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alexandru Elisei <alexandru.elisei@arm.com> Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210302120345.3102874-1-suzuki.poulose@arm.com Message-Id: <20210305185254.3730990-2-maz@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-27Merge tag 'io_uring-worker.v3-2021-02-25' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+1
Pull io_uring thread rewrite from Jens Axboe: "This converts the io-wq workers to be forked off the tasks in question instead of being kernel threads that assume various bits of the original task identity. This kills > 400 lines of code from io_uring/io-wq, and it's the worst part of the code. We've had several bugs in this area, and the worry is always that we could be missing some pieces for file types doing unusual things (recent /dev/tty example comes to mind, userfaultfd reads installing file descriptors is another fun one... - both of which need special handling, and I bet it's not the last weird oddity we'll find). With these identical workers, we can have full confidence that we're never missing anything. That, in itself, is a huge win. Outside of that, it's also more efficient since we're not wasting space and code on tracking state, or switching between different states. I'm sure we're going to find little things to patch up after this series, but testing has been pretty thorough, from the usual regression suite to production. Any issue that may crop up should be manageable. There's also a nice series of further reductions we can do on top of this, but I wanted to get the meat of it out sooner rather than later. The general worry here isn't that it's fundamentally broken. Most of the little issues we've found over the last week have been related to just changes in how thread startup/exit is done, since that's the main difference between using kthreads and these kinds of threads. In fact, if all goes according to plan, I want to get this into the 5.10 and 5.11 stable branches as well. That said, the changes outside of io_uring/io-wq are: - arch setup, simple one-liner to each arch copy_thread() implementation. - Removal of net and proc restrictions for io_uring, they are no longer needed or useful" * tag 'io_uring-worker.v3-2021-02-25' of git://git.kernel.dk/linux-block: (30 commits) io-wq: remove now unused IO_WQ_BIT_ERROR io_uring: fix SQPOLL thread handling over exec io-wq: improve manager/worker handling over exec io_uring: ensure SQPOLL startup is triggered before error shutdown io-wq: make buffered file write hashed work map per-ctx io-wq: fix race around io_worker grabbing io-wq: fix races around manager/worker creation and task exit io_uring: ensure io-wq context is always destroyed for tasks arch: ensure parisc/powerpc handle PF_IO_WORKER in copy_thread() io_uring: cleanup ->user usage io-wq: remove nr_process accounting io_uring: flag new native workers with IORING_FEAT_NATIVE_WORKERS net: remove cmsg restriction from io_uring based send/recvmsg calls Revert "proc: don't allow async path resolution of /proc/self components" Revert "proc: don't allow async path resolution of /proc/thread-self components" io_uring: move SQPOLL thread io-wq forked worker io-wq: make io_wq_fork_thread() available to other users io-wq: only remove worker from free_list, if it was there io_uring: remove io_identity io_uring: remove any grabbing of context ...
2021-02-26Merge tag 'riscv-for-linus-5.12-mw0' of ↵Linus Torvalds6-526/+4
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: "A handful of new RISC-V related patches for this merge window: - A check to ensure drivers are properly using uaccess. This isn't manifesting with any of the drivers I'm currently using, but may catch errors in new drivers. - Some preliminary support for the FU740, along with the HiFive Unleashed it will appear on. - NUMA support for RISC-V, which involves making the arm64 code generic. - Support for kasan on the vmalloc region. - A handful of new drivers for the Kendryte K210, along with the DT plumbing required to boot on a handful of K210-based boards. - Support for allocating ASIDs. - Preliminary support for kernels larger than 128MiB. - Various other improvements to our KASAN support, including the utilization of huge pages when allocating the KASAN regions. We may have already found a bug with the KASAN_VMALLOC code, but it's passing my tests. There's a fix in the works, but that will probably miss the merge window. * tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (75 commits) riscv: Improve kasan population by using hugepages when possible riscv: Improve kasan population function riscv: Use KASAN_SHADOW_INIT define for kasan memory initialization riscv: Improve kasan definitions riscv: Get rid of MAX_EARLY_MAPPING_SIZE soc: canaan: Sort the Makefile alphabetically riscv: Disable KSAN_SANITIZE for vDSO riscv: Remove unnecessary declaration riscv: Add Canaan Kendryte K210 SD card defconfig riscv: Update Canaan Kendryte K210 defconfig riscv: Add Kendryte KD233 board device tree riscv: Add SiPeed MAIXDUINO board device tree riscv: Add SiPeed MAIX GO board device tree riscv: Add SiPeed MAIX DOCK board device tree riscv: Add SiPeed MAIX BiT board device tree riscv: Update Canaan Kendryte K210 device tree dt-bindings: add resets property to dw-apb-timer dt-bindings: fix sifive gpio properties dt-bindings: update sifive uart compatible string dt-bindings: update sifive clint compatible string ...
2021-02-26Merge tag 'arm64-fixes' of ↵Linus Torvalds10-25/+42
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "The big one is a fix for the VHE enabling path during early boot, where the code enabling the MMU wasn't necessarily in the identity map of the new page-tables, resulting in a consistent crash with 64k pages. In fixing that, we noticed some missing barriers too, so we added those for the sake of architectural compliance. Other than that, just the usual merge window trickle. There'll be more to come, too. Summary: - Fix lockdep false alarm on resume-from-cpuidle path - Fix memory leak in kexec_file - Fix module linker script to work with GDB - Fix error code when trying to use uprobes with AArch32 instructions - Fix late VHE enabling with 64k pages - Add missing ISBs after TLB invalidation - Fix seccomp when tracing syscall -1 - Fix stacktrace return code at end of stack - Fix inconsistent whitespace for pointer return values - Fix compiler warnings when building with W=1" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: stacktrace: Report when we reach the end of the stack arm64: ptrace: Fix seccomp of traced syscall -1 (NO_SYSCALL) arm64: Add missing ISB after invalidating TLB in enter_vhe arm64: Add missing ISB after invalidating TLB in __primary_switch arm64: VHE: Enable EL2 MMU from the idmap KVM: arm64: make the hyp vector table entries local arm64/mm: Fixed some coding style issues arm64: uprobe: Return EOPNOTSUPP for AARCH32 instruction probing kexec: move machine_kexec_post_load() to public interface arm64 module: set plt* section addresses to 0x0 arm64: kexec_file: fix memory leakage in create_dtb() when fdt_open_into() fails arm64: spectre: Prevent lockdep splat on v4 mitigation enable path
2021-02-26arm64: kasan: simplify and inline MTE functionsAndrey Konovalov7-73/+60
This change provides a simpler implementation of mte_get_mem_tag(), mte_get_random_tag(), and mte_set_mem_tag_range(). Simplifications include removing system_supports_mte() checks as these functions are onlye called from KASAN runtime that had already checked system_supports_mte(). Besides that, size and address alignment checks are removed from mte_set_mem_tag_range(), as KASAN now does those. This change also moves these functions into the asm/mte-kasan.h header and implements mte_set_mem_tag_range() via inline assembly to avoid unnecessary functions calls. [vincenzo.frascino@arm.com: fix warning in mte_get_random_tag()] Link: https://lkml.kernel.org/r/20210211152208.23811-1-vincenzo.frascino@arm.com Link: https://lkml.kernel.org/r/a26121b294fdf76e369cb7a74351d1c03a908930.1612546384.git.andreyknvl@google.com Co-developed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26kfence: add test suiteMarco Elver1-1/+1
Add KFENCE test suite, testing various error detection scenarios. Makes use of KUnit for test organization. Since KFENCE's interface to obtain error reports is via the console, the test verifies that KFENCE outputs expected reports to the console. [elver@google.com: fix typo in test] Link: https://lkml.kernel.org/r/X9lHQExmHGvETxY4@elver.google.com [elver@google.com: show access type in report] Link: https://lkml.kernel.org/r/20210111091544.3287013-2-elver@google.com Link: https://lkml.kernel.org/r/20201103175841.3495947-9-elver@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Marco Elver <elver@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Co-developed-by: Alexander Potapenko <glider@google.com> Reviewed-by: Jann Horn <jannh@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christopher Lameter <cl@linux.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hillf Danton <hdanton@sina.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joern Engel <joern@purestorage.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: SeongJae Park <sjpark@amazon.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26kfence: use pt_regs to generate stack trace on faultsMarco Elver2-3/+1
Instead of removing the fault handling portion of the stack trace based on the fault handler's name, just use struct pt_regs directly. Change kfence_handle_page_fault() to take a struct pt_regs, and plumb it through to kfence_report_error() for out-of-bounds, use-after-free, or invalid access errors, where pt_regs is used to generate the stack trace. If the kernel is a DEBUG_KERNEL, also show registers for more information. Link: https://lkml.kernel.org/r/20201105092133.2075331-1-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Suggested-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jann Horn <jannh@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26arm64, kfence: enable KFENCE for ARM64Marco Elver4-1/+36
Add architecture specific implementation details for KFENCE and enable KFENCE for the arm64 architecture. In particular, this implements the required interface in <asm/kfence.h>. KFENCE requires that attributes for pages from its memory pool can individually be set. Therefore, force the entire linear map to be mapped at page granularity. Doing so may result in extra memory allocated for page tables in case rodata=full is not set; however, currently CONFIG_RODATA_FULL_DEFAULT_ENABLED=y is the default, and the common case is therefore not affected by this change. [elver@google.com: add missing copyright and description header] Link: https://lkml.kernel.org/r/20210118092159.145934-3-elver@google.com Link: https://lkml.kernel.org/r/20201103175841.3495947-4-elver@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Marco Elver <elver@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Co-developed-by: Alexander Potapenko <glider@google.com> Reviewed-by: Jann Horn <jannh@google.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christopher Lameter <cl@linux.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hillf Danton <hdanton@sina.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joern Engel <joern@purestorage.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: SeongJae Park <sjpark@amazon.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26arm64/mm: define arch_get_mappable_range()Anshuman Khandual1-8/+7
This overrides arch_get_mappable_range() on arm64 platform which will be used with recently added generic framework. It drops inside_linear_region() and subsequent check in arch_add_memory() which are no longer required. It also adds a VM_BUG_ON() check that would ensure that mhp_range_allowed() has already been called. Link: https://lkml.kernel.org/r/1612149902-7867-3-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pankaj Gupta <pankaj.gupta@cloud.ionos.com> Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: teawater <teawaterz@linux.alibaba.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Wei Yang <richard.weiyang@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-25Merge tag 'kbuild-v5.12' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Fix false-positive build warnings for ARCH=ia64 builds - Optimize dictionary size for module compression with xz - Check the compiler and linker versions in Kconfig - Fix misuse of extra-y - Support DWARF v5 debug info - Clamp SUBLEVEL to 255 because stable releases 4.4.x and 4.9.x exceeded the limit - Add generic syscall{tbl,hdr}.sh for cleanups across arches - Minor cleanups of genksyms - Minor cleanups of Kconfig * tag 'kbuild-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (38 commits) initramfs: Remove redundant dependency of RD_ZSTD on BLK_DEV_INITRD kbuild: remove deprecated 'always' and 'hostprogs-y/m' kbuild: parse C= and M= before changing the working directory kbuild: reuse this-makefile to define abs_srctree kconfig: unify rule of config, menuconfig, nconfig, gconfig, xconfig kconfig: omit --oldaskconfig option for 'make config' kconfig: fix 'invalid option' for help option kconfig: remove dead code in conf_askvalue() kconfig: clean up nested if-conditionals in check_conf() kconfig: Remove duplicate call to sym_get_string_value() Makefile: Remove # characters from compiler string Makefile: reuse CC_VERSION_TEXT kbuild: check the minimum linker version in Kconfig kbuild: remove ld-version macro scripts: add generic syscallhdr.sh scripts: add generic syscalltbl.sh arch: syscalls: remove $(srctree)/ prefix from syscall tables arch: syscalls: add missing FORCE and fix 'targets' to make if_changed work gen_compile_commands: prune some directories kbuild: simplify access to the kernel's version ...
2021-02-25arm64: stacktrace: Report when we reach the end of the stackMark Brown1-1/+1
Currently the arm64 unwinder code returns -EINVAL whenever it can't find the next stack frame, not distinguishing between cases where the stack has been corrupted or is otherwise in a state it shouldn't be and cases where we have reached the end of the stack. At the minute none of the callers care what error code is returned but this will be important for reliable stack trace which needs to be sure that the stack is intact. Change to return -ENOENT in the case where we reach the bottom of the stack. The error codes from this function are only used in kernel, this particular code is chosen as we are indicating that we know there is no frame there. Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20210224165037.24138-1-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2021-02-25arm64: ptrace: Fix seccomp of traced syscall -1 (NO_SYSCALL)Timothy E Baldwin1-1/+1
Since commit f086f67485c5 ("arm64: ptrace: add support for syscall emulation"), if system call number -1 is called and the process is being traced with PTRACE_SYSCALL, for example by strace, the seccomp check is skipped and -ENOSYS is returned unconditionally (unless altered by the tracer) rather than carrying out action specified in the seccomp filter. The consequence of this is that it is not possible to reliably strace a seccomp based implementation of a foreign system call interface in which r7/x8 is permitted to be -1 on entry to a system call. Also trace_sys_enter and audit_syscall_entry are skipped if a system call is skipped. Fix by removing the in_syscall(regs) check restoring the previous behaviour which is like AArch32, x86 (which uses generic code) and everything else. Cc: Oleg Nesterov <oleg@redhat.com> Cc: Catalin Marinas<catalin.marinas@arm.com> Cc: <stable@vger.kernel.org> Fixes: f086f67485c5 ("arm64: ptrace: add support for syscall emulation") Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Timothy E Baldwin <T.E.Baldwin99@members.leeds.ac.uk> Link: https://lore.kernel.org/r/90edd33b-6353-1228-791f-0336d94d5f8c@majoroak.me.uk Signed-off-by: Will Deacon <will@kernel.org>
2021-02-24Merge branch 'akpm' (patches from Andrew)Linus Torvalds4-6/+39
Merge misc updates from Andrew Morton: "A few small subsystems and some of MM. 172 patches. Subsystems affected by this patch series: hexagon, scripts, ntfs, ocfs2, vfs, and mm (slab-generic, slab, slub, debug, pagecache, swap, memcg, pagemap, mprotect, mremap, page-reporting, vmalloc, kasan, pagealloc, memory-failure, hugetlb, vmscan, z3fold, compaction, mempolicy, oom-kill, hugetlbfs, and migration)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (172 commits) mm/migrate: remove unneeded semicolons hugetlbfs: remove unneeded return value of hugetlb_vmtruncate() hugetlbfs: fix some comment typos hugetlbfs: correct some obsolete comments about inode i_mutex hugetlbfs: make hugepage size conversion more readable hugetlbfs: remove meaningless variable avoid_reserve hugetlbfs: correct obsolete function name in hugetlbfs_read_iter() hugetlbfs: use helper macro default_hstate in init_hugetlbfs_fs hugetlbfs: remove useless BUG_ON(!inode) in hugetlbfs_setattr() hugetlbfs: remove special hugetlbfs_set_page_dirty() mm/hugetlb: change hugetlb_reserve_pages() to type bool mm, oom: fix a comment in dump_task() mm/mempolicy: use helper range_in_vma() in queue_pages_test_walk() numa balancing: migrate on fault among multiple bound nodes mm, compaction: make fast_isolate_freepages() stay within zone mm/compaction: fix misbehaviors of fast_find_migrateblock() mm/compaction: correct deferral logic for proactive compaction mm/compaction: remove duplicated VM_BUG_ON_PAGE !PageLocked mm/compaction: remove rcu_read_lock during page compaction z3fold: simplify the zhdr initialization code in init_z3fold_page() ...
2021-02-24kasan, arm64: allow using KUnit tests with HW_TAGS modeAndrey Konovalov4-6/+39
On a high level, this patch allows running KUnit KASAN tests with the hardware tag-based KASAN mode. Internally, this change reenables tag checking at the end of each KASAN test that triggers a tag fault and leads to tag checking being disabled. Also simplify is_write calculation in report_tag_fault. With this patch KASAN tests are still failing for the hardware tag-based mode; fixes come in the next few patches. [andreyknvl@google.com: export HW_TAGS symbols for KUnit tests] Link: https://lkml.kernel.org/r/e7eeb252da408b08f0c81b950a55fb852f92000b.1613155970.git.andreyknvl@google.com Link: https://linux-review.googlesource.com/id/Id94dc9eccd33b23cda4950be408c27f879e474c8 Link: https://lkml.kernel.org/r/51b23112cf3fd62b8f8e9df81026fa2b15870501.1610733117.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24Merge tag 'char-misc-5.12-rc1' of ↵Linus Torvalds1-0/+11
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the large set of char/misc/whatever driver subsystem updates for 5.12-rc1. Over time it seems like this tree is collecting more and more tiny driver subsystems in one place, making it easier for those maintainers, which is why this is getting larger. Included in here are: - coresight driver updates - habannalabs driver updates - virtual acrn driver addition (proper acks from the x86 maintainers) - broadcom misc driver addition - speakup driver updates - soundwire driver updates - fpga driver updates - amba driver updates - mei driver updates - vfio driver updates - greybus driver updates - nvmeem driver updates - phy driver updates - mhi driver updates - interconnect driver udpates - fsl-mc bus driver updates - random driver fix - some small misc driver updates (rtsx, pvpanic, etc.) All of these have been in linux-next for a while, with the only reported issue being a merge conflict due to the dfl_device_id addition from the fpga subsystem in here" * tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (311 commits) spmi: spmi-pmic-arb: Fix hw_irq overflow Documentation: coresight: Add PID tracing description coresight: etm-perf: Support PID tracing for kernel at EL2 coresight: etm-perf: Clarify comment on perf options ACRN: update MAINTAINERS: mailing list is subscribers-only regmap: sdw-mbq: use MODULE_LICENSE("GPL") regmap: sdw: use no_pm routines for SoundWire 1.2 MBQ regmap: sdw: use _no_pm functions in regmap_read/write soundwire: intel: fix possible crash when no device is detected MAINTAINERS: replace my with email with replacements mhi: Fix double dma free uapi: map_to_7segment: Update example in documentation uio: uio_pci_generic: don't fail probe if pdev->irq equals to IRQ_NOTCONNECTED drivers/misc/vmw_vmci: restrict too big queue size in qp_host_alloc_queue firewire: replace tricky statement by two simple ones vme: make remove callback return void firmware: google: make coreboot driver's remove callback return void firmware: xilinx: Use explicit values for all enum values sample/acrn: Introduce a sample of HSM ioctl interface usage virt: acrn: Introduce an interface for Service VM to control vCPU ...
2021-02-24arm64: Add missing ISB after invalidating TLB in enter_vheMarc Zyngier1-0/+1
Although there has been a bit of back and forth on the subject, it appears that invalidating TLBs requires an ISB instruction after the TLBI/DSB sequence when FEAT_ETS is not implemented by the CPU. From the bible: | In an implementation that does not implement FEAT_ETS, a TLB | maintenance instruction executed by a PE, PEx, can complete at any | time after it is issued, but is only guaranteed to be finished for a | PE, PEx, after the execution of DSB by the PEx followed by a Context | synchronization event Add the missing ISB in enter_vhe(), just in case. Fixes: f359182291c7 ("arm64: Provide an 'upgrade to VHE' stub hypercall") Suggested-by: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20210224093738.3629662-4-maz@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2021-02-24arm64: Add missing ISB after invalidating TLB in __primary_switchMarc Zyngier1-0/+1
Although there has been a bit of back and forth on the subject, it appears that invalidating TLBs requires an ISB instruction when FEAT_ETS is not implemented by the CPU. From the bible: | In an implementation that does not implement FEAT_ETS, a TLB | maintenance instruction executed by a PE, PEx, can complete at any | time after it is issued, but is only guaranteed to be finished for a | PE, PEx, after the execution of DSB by the PEx followed by a Context | synchronization event Add the missing ISB in __primary_switch, just in case. Fixes: 3c5e9f238bc4 ("arm64: head.S: move KASLR processing out of __enable_mmu()") Suggested-by: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20210224093738.3629662-3-maz@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2021-02-24arm64: VHE: Enable EL2 MMU from the idmapMarc Zyngier1-13/+26
Enabling the MMU requires the write to SCTLR_ELx (and the ISB that follows) to live in some identity-mapped memory. Otherwise, the translation will result in something totally unexpected (either fetching the wrong instruction stream, or taking a fault of some sort). This is exactly what happens in mutate_to_vhe(), as this code lives in the .hyp.text section, which isn't identity-mapped. With the right configuration, this explodes badly. Extract the MMU-enabling part of mutate_to_vhe(), and move it to its own function that lives in the idmap. This ensures nothing bad happens. Fixes: f359182291c7 ("arm64: Provide an 'upgrade to VHE' stub hypercall") Reported-by: "kernelci.org bot" <bot@kernelci.org> Tested-by: Guillaume Tucker <guillaume.tucker@collabora.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210224093738.3629662-2-maz@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2021-02-24KVM: arm64: make the hyp vector table entries localJoey Gouly1-1/+1
Make the hyp vector table entries local functions so they are not accidentally referred to outside of this file. Using SYM_CODE_START_LOCAL matches the other vector tables (in hyp-stub.S, hibernate-asm.S and entry.S) Signed-off-by: Joey Gouly <joey.gouly@arm.com> Acked-by: Will Deacon <will@kernel.org> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210222164956.43514-1-joey.gouly@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2021-02-23Merge branch 'for-linus' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Jiri Kosina: - support for "Unified Battery" feature on Logitech devices from Filipe Laíns - power management improvements for intel-ish driver from Zhang Lixu - support for Goodix devices from Douglas Anderson - improved handling of generic HID keyboard in order to make it easier for userspace to figure out the details of the device, from Dmitry Torokhov - Playstation DualSense support from Roderick Colenbrander - other assorted small fixes and device ID additions. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (49 commits) HID: playstation: add DualSense player LED support. HID: playstation: add microphone mute support for DualSense. HID: playstation: add initial DualSense lightbar support. HID: wacom: Ignore attempts to overwrite the touch_max value from HID HID: playstation: fix array size comparison (off-by-one) HID: playstation: fix unused variable in ps_battery_get_property. HID: playstation: report DualSense hardware and firmware version. HID: playstation: add DualSense classic rumble support. HID: playstation: add DualSense Bluetooth support. HID: playstation: track devices in list. HID: playstation: add DualSense accelerometer and gyroscope support. HID: playstation: add DualSense touchpad support. HID: playstation: add DualSense battery support. HID: playstation: use DualSense MAC address as unique identifier. HID: playstation: initial DualSense USB support. HID: ite: Enable QUIRK_TOUCHPAD_ON_OFF_REPORT on Acer Aspire Switch 10E HID: Ignore battery for Elan touchscreen on HP Spectre X360 15-df0xxx HID: logitech-dj: add support for the new lightspeed connection iteration HID: intel-ish-hid: ipc: Add Tiger Lake H PCI device ID HID: logitech-dj: add support for keyboard events in eQUAD step 4 Gaming ...
2021-02-23Merge tag 'idmapped-mounts-v5.12' of ↵Linus Torvalds2-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull idmapped mounts from Christian Brauner: "This introduces idmapped mounts which has been in the making for some time. Simply put, different mounts can expose the same file or directory with different ownership. This initial implementation comes with ports for fat, ext4 and with Christoph's port for xfs with more filesystems being actively worked on by independent people and maintainers. Idmapping mounts handle a wide range of long standing use-cases. Here are just a few: - Idmapped mounts make it possible to easily share files between multiple users or multiple machines especially in complex scenarios. For example, idmapped mounts will be used in the implementation of portable home directories in systemd-homed.service(8) where they allow users to move their home directory to an external storage device and use it on multiple computers where they are assigned different uids and gids. This effectively makes it possible to assign random uids and gids at login time. - It is possible to share files from the host with unprivileged containers without having to change ownership permanently through chown(2). - It is possible to idmap a container's rootfs and without having to mangle every file. For example, Chromebooks use it to share the user's Download folder with their unprivileged containers in their Linux subsystem. - It is possible to share files between containers with non-overlapping idmappings. - Filesystem that lack a proper concept of ownership such as fat can use idmapped mounts to implement discretionary access (DAC) permission checking. - They allow users to efficiently changing ownership on a per-mount basis without having to (recursively) chown(2) all files. In contrast to chown (2) changing ownership of large sets of files is instantenous with idmapped mounts. This is especially useful when ownership of a whole root filesystem of a virtual machine or container is changed. With idmapped mounts a single syscall mount_setattr syscall will be sufficient to change the ownership of all files. - Idmapped mounts always take the current ownership into account as idmappings specify what a given uid or gid is supposed to be mapped to. This contrasts with the chown(2) syscall which cannot by itself take the current ownership of the files it changes into account. It simply changes the ownership to the specified uid and gid. This is especially problematic when recursively chown(2)ing a large set of files which is commong with the aforementioned portable home directory and container and vm scenario. - Idmapped mounts allow to change ownership locally, restricting it to specific mounts, and temporarily as the ownership changes only apply as long as the mount exists. Several userspace projects have either already put up patches and pull-requests for this feature or will do so should you decide to pull this: - systemd: In a wide variety of scenarios but especially right away in their implementation of portable home directories. https://systemd.io/HOME_DIRECTORY/ - container runtimes: containerd, runC, LXD:To share data between host and unprivileged containers, unprivileged and privileged containers, etc. The pull request for idmapped mounts support in containerd, the default Kubernetes runtime is already up for quite a while now: https://github.com/containerd/containerd/pull/4734 - The virtio-fs developers and several users have expressed interest in using this feature with virtual machines once virtio-fs is ported. - ChromeOS: Sharing host-directories with unprivileged containers. I've tightly synced with all those projects and all of those listed here have also expressed their need/desire for this feature on the mailing list. For more info on how people use this there's a bunch of talks about this too. Here's just two recent ones: https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdf https://fosdem.org/2021/schedule/event/containers_idmap/ This comes with an extensive xfstests suite covering both ext4 and xfs: https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts It covers truncation, creation, opening, xattrs, vfscaps, setid execution, setgid inheritance and more both with idmapped and non-idmapped mounts. It already helped to discover an unrelated xfs setgid inheritance bug which has since been fixed in mainline. It will be sent for inclusion with the xfstests project should you decide to merge this. In order to support per-mount idmappings vfsmounts are marked with user namespaces. The idmapping of the user namespace will be used to map the ids of vfs objects when they are accessed through that mount. By default all vfsmounts are marked with the initial user namespace. The initial user namespace is used to indicate that a mount is not idmapped. All operations behave as before and this is verified in the testsuite. Based on prior discussions we want to attach the whole user namespace and not just a dedicated idmapping struct. This allows us to reuse all the helpers that already exist for dealing with idmappings instead of introducing a whole new range of helpers. In addition, if we decide in the future that we are confident enough to enable unprivileged users to setup idmapped mounts the permission checking can take into account whether the caller is privileged in the user namespace the mount is currently marked with. The user namespace the mount will be marked with can be specified by passing a file descriptor refering to the user namespace as an argument to the new mount_setattr() syscall together with the new MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern of extensibility. The following conditions must be met in order to create an idmapped mount: - The caller must currently have the CAP_SYS_ADMIN capability in the user namespace the underlying filesystem has been mounted in. - The underlying filesystem must support idmapped mounts. - The mount must not already be idmapped. This also implies that the idmapping of a mount cannot be altered once it has been idmapped. - The mount must be a detached/anonymous mount, i.e. it must have been created by calling open_tree() with the OPEN_TREE_CLONE flag and it must not already have been visible in the filesystem. The last two points guarantee easier semantics for userspace and the kernel and make the implementation significantly simpler. By default vfsmounts are marked with the initial user namespace and no behavioral or performance changes are observed. The manpage with a detailed description can be found here: https://git.kernel.org/brauner/man-pages/c/1d7b902e2875a1ff342e036a9f866a995640aea8 In order to support idmapped mounts, filesystems need to be changed and mark themselves with the FS_ALLOW_IDMAP flag in fs_flags. The patches to convert individual filesystem are not very large or complicated overall as can be seen from the included fat, ext4, and xfs ports. Patches for other filesystems are actively worked on and will be sent out separately. The xfstestsuite can be used to verify that port has been done correctly. The mount_setattr() syscall is motivated independent of the idmapped mounts patches and it's been around since July 2019. One of the most valuable features of the new mount api is the ability to perform mounts based on file descriptors only. Together with the lookup restrictions available in the openat2() RESOLVE_* flag namespace which we added in v5.6 this is the first time we are close to hardened and race-free (e.g. symlinks) mounting and path resolution. While userspace has started porting to the new mount api to mount proper filesystems and create new bind-mounts it is currently not possible to change mount options of an already existing bind mount in the new mount api since the mount_setattr() syscall is missing. With the addition of the mount_setattr() syscall we remove this last restriction and userspace can now fully port to the new mount api, covering every use-case the old mount api could. We also add the crucial ability to recursively change mount options for a whole mount tree, both removing and adding mount options at the same time. This syscall has been requested multiple times by various people and projects. There is a simple tool available at https://github.com/brauner/mount-idmapped that allows to create idmapped mounts so people can play with this patch series. I'll add support for the regular mount binary should you decide to pull this in the following weeks: Here's an example to a simple idmapped mount of another user's home directory: u1001@f2-vm:/$ sudo ./mount --idmap both:1000:1001:1 /home/ubuntu/ /mnt u1001@f2-vm:/$ ls -al /home/ubuntu/ total 28 drwxr-xr-x 2 ubuntu ubuntu 4096 Oct 28 22:07 . drwxr-xr-x 4 root root 4096 Oct 28 04:00 .. -rw------- 1 ubuntu ubuntu 3154 Oct 28 22:12 .bash_history -rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout -rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc -rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile -rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful -rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo u1001@f2-vm:/$ ls -al /mnt/ total 28 drwxr-xr-x 2 u1001 u1001 4096 Oct 28 22:07 . drwxr-xr-x 29 root root 4096 Oct 28 22:01 .. -rw------- 1 u1001 u1001 3154 Oct 28 22:12 .bash_history -rw-r--r-- 1 u1001 u1001 220 Feb 25 2020 .bash_logout -rw-r--r-- 1 u1001 u1001 3771 Feb 25 2020 .bashrc -rw-r--r-- 1 u1001 u1001 807 Feb 25 2020 .profile -rw-r--r-- 1 u1001 u1001 0 Oct 16 16:11 .sudo_as_admin_successful -rw------- 1 u1001 u1001 1144 Oct 28 00:43 .viminfo u1001@f2-vm:/$ touch /mnt/my-file u1001@f2-vm:/$ setfacl -m u:1001:rwx /mnt/my-file u1001@f2-vm:/$ sudo setcap -n 1001 cap_net_raw+ep /mnt/my-file u1001@f2-vm:/$ ls -al /mnt/my-file -rw-rwxr--+ 1 u1001 u1001 0 Oct 28 22:14 /mnt/my-file u1001@f2-vm:/$ ls -al /home/ubuntu/my-file -rw-rwxr--+ 1 ubuntu ubuntu 0 Oct 28 22:14 /home/ubuntu/my-file u1001@f2-vm:/$ getfacl /mnt/my-file getfacl: Removing leading '/' from absolute path names # file: mnt/my-file # owner: u1001 # group: u1001 user::rw- user:u1001:rwx group::rw- mask::rwx other::r-- u1001@f2-vm:/$ getfacl /home/ubuntu/my-file getfacl: Removing leading '/' from absolute path names # file: home/ubuntu/my-file # owner: ubuntu # group: ubuntu user::rw- user:ubuntu:rwx group::rw- mask::rwx other::r--" * tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: (41 commits) xfs: remove the possibly unused mp variable in xfs_file_compat_ioctl xfs: support idmapped mounts ext4: support idmapped mounts fat: handle idmapped mounts tests: add mount_setattr() selftests fs: introduce MOUNT_ATTR_IDMAP fs: add mount_setattr() fs: add attr_flags_to_mnt_flags helper fs: split out functions to hold writers namespace: only take read lock in do_reconfigure_mnt() mount: make {lock,unlock}_mount_hash() static namespace: take lock_mount_hash() directly when changing flags nfs: do not export idmapped mounts overlayfs: do not mount on top of idmapped mounts ecryptfs: do not mount on top of idmapped mounts ima: handle idmapped mounts apparmor: handle idmapped mounts fs: make helpers idmap mount aware exec: handle idmapped mounts would_dump: handle idmapped mounts ...
2021-02-23Merge tag 'clang-lto-v5.12-rc1' of ↵Linus Torvalds2-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull clang LTO updates from Kees Cook: "Clang Link Time Optimization. This is built on the work done preparing for LTO by arm64 folks, tracing folks, etc. This includes the core changes as well as the remaining pieces for arm64 (LTO has been the default build method on Android for about 3 years now, as it is the prerequisite for the Control Flow Integrity protections). While x86 LTO enablement is done, it depends on some pending objtool clean-ups. It's possible that I'll send a "part 2" pull request for LTO that includes x86 support. For merge log posterity, and as detailed in commit dc5723b02e52 ("kbuild: add support for Clang LTO"), here is the lt;dr to do an LTO build: make LLVM=1 LLVM_IAS=1 defconfig scripts/config -e LTO_CLANG_THIN make LLVM=1 LLVM_IAS=1 (To do a cross-compile of arm64, add "CROSS_COMPILE=aarch64-linux-gnu-" and "ARCH=arm64" to the "make" command lines.) Summary: - Clang LTO build infrastructure and arm64-specific enablement (Sami Tolvanen) - Recursive build CC_FLAGS_LTO fix (Alexander Lobakin)" * tag 'clang-lto-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: kbuild: prevent CC_FLAGS_LTO self-bloating on recursive rebuilds arm64: allow LTO to be selected arm64: disable recordmcount with DYNAMIC_FTRACE_WITH_REGS arm64: vdso: disable LTO drivers/misc/lkdtm: disable LTO for rodata.o efi/libstub: disable LTO scripts/mod: disable LTO for empty.c modpost: lto: strip .lto from module names PCI: Fix PREL32 relocations for LTO init: lto: fix PREL32 relocations init: lto: ensure initcall ordering kbuild: lto: add a default list of used symbols kbuild: lto: merge module sections kbuild: lto: limit inlining kbuild: lto: fix module versioning kbuild: add support for Clang LTO tracing: move function tracer options to Kconfig
2021-02-23arm64/mm: Fixed some coding style issuesZhiyuan Dai1-3/+3
Adjust whitespace for fixmap_pXd() functions returning pointers for consistency with the kernel coding style. Signed-off-by: Zhiyuan Dai <daizhiyuan@phytium.com.cn> Link: https://lore.kernel.org/r/1613958231-5474-1-git-send-email-daizhiyuan@phytium.com.cn Signed-off-by: Will Deacon <will@kernel.org>
2021-02-23arm64: uprobe: Return EOPNOTSUPP for AARCH32 instruction probingHe Zhe1-1/+1
As stated in linux/errno.h, ENOTSUPP should never be seen by user programs. When we set up uprobe with 32-bit perf and arm64 kernel, we would see the following vague error without useful hint. The sys_perf_event_open() syscall returned with 524 (INTERNAL ERROR: strerror_r(524, [buf], 128)=22) Use EOPNOTSUPP instead to indicate such cases. Signed-off-by: He Zhe <zhe.he@windriver.com> Link: https://lore.kernel.org/r/20210223082535.48730-1-zhe.he@windriver.com Cc: <stable@vger.kernel.org> Signed-off-by: Will Deacon <will@kernel.org>
2021-02-23Merge branch 'for-5.12/i2c-hid' into for-linusJiri Kosina1-1/+2
- ACPI and OF support made more generic / decoupled. From Douglas Anderson - support for Goodix devices from Douglas Anderson
2021-02-22Merge tag 'regulator-v5.12' of ↵Linus Torvalds1-1/+8
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "Quite an active release for driver specific updates but very little going on at the subsystem level this time for the regulator API. Summary: - Overhaul of the Qualcomm LABIBB driver. - Allow use of regulator_sync_voltage() on coupled regulators. - Support for Action ATC260x, Mediatek DVSRC and MT6315, Qualcomm PCM8180/c and PM8009-1 and Richtek RT4831 - Removal of the AB3100 driver" * tag 'regulator-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (49 commits) regulator: bd718x7, bd71828, Fix dvs voltage levels regulator: pca9450: Add sd-vsel GPIO regulator: pca9450: Enable system reset on WDOG_B assertion regulator: pca9450: Add SD_VSEL GPIO for LDO5 regulator: qcom-rpmh: fix pm8009 ldo7 regulator: mt6315: Add support for MT6315 regulator regulator: document binding for MT6315 regulator regulator: dt-bindings: Document charger-supply for max8997 regulator: qcom-labibb: Use disable_irq_nosync from isr regulator: pf8x00: Fix typo for PF8200 chip name regulator: pf8x00: set ramp_delay for bucks regulator: core: Avoid debugfs: Directory ... already present! error regulator: pf8x00: Add suspend support regulator: Make regulator_sync_voltage() usable by coupled regulators regulator: s5m8767: Drop regulators OF node reference regulator: qcom-rpmh: Add pmc8180 and pmc8180c regulator: qcom-rpmh: Add pmc8180 and pmc8180c regulator: s5m8767: Fix reference count leak regulator: remove ab3100 driver regulator: axp20x: Fix reference cout leak ...
2021-02-21Merge branch 'linus' of ↵Linus Torvalds13-339/+345
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto update from Herbert Xu: "API: - Restrict crypto_cipher to internal API users only. Algorithms: - Add x86 aesni acceleration for cts. - Improve x86 aesni acceleration for xts. - Remove x86 acceleration of some uncommon algorithms. - Remove RIPE-MD, Tiger and Salsa20. - Remove tnepres. - Add ARM acceleration for BLAKE2s and BLAKE2b. Drivers: - Add Keem Bay OCS HCU driver. - Add Marvell OcteonTX2 CPT PF driver. - Remove PicoXcell driver. - Remove mediatek driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (154 commits) hwrng: timeriomem - Use device-managed registration API crypto: hisilicon/qm - fix printing format issue crypto: hisilicon/qm - do not reset hardware when CE happens crypto: hisilicon/qm - update irqflag crypto: hisilicon/qm - fix the value of 'QM_SQC_VFT_BASE_MASK_V2' crypto: hisilicon/qm - fix request missing error crypto: hisilicon/qm - removing driver after reset crypto: octeontx2 - fix -Wpointer-bool-conversion warning crypto: hisilicon/hpre - enable Elliptic curve cryptography crypto: hisilicon - PASID fixed on Kunpeng 930 crypto: hisilicon/qm - fix use of 'dma_map_single' crypto: hisilicon/hpre - tiny fix crypto: hisilicon/hpre - adapt the number of clusters crypto: cpt - remove casting dma_alloc_coherent crypto: keembay-ocs-aes - Fix 'q' assignment during CCM B0 generation crypto: xor - Fix typo of optimization hwrng: optee - Use device-managed registration API crypto: arm64/crc-t10dif - move NEON yield to C code crypto: arm64/aes-ce-mac - simplify NEON yield crypto: arm64/aes-neonbs - remove NEON yield calls ...
2021-02-21arch: setup PF_IO_WORKER threads like PF_KTHREADJens Axboe1-1/+1
PF_IO_WORKER are kernel threads too, but they aren't PF_KTHREAD in the sense that we don't assign ->set_child_tid with our own structure. Just ensure that every arch sets up the PF_IO_WORKER threads like kthreads in the arch implementation of copy_thread(). Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-21Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds31-224/+829
Pull KVM updates from Paolo Bonzini: "x86: - Support for userspace to emulate Xen hypercalls - Raise the maximum number of user memslots - Scalability improvements for the new MMU. Instead of the complex "fast page fault" logic that is used in mmu.c, tdp_mmu.c uses an rwlock so that page faults are concurrent, but the code that can run against page faults is limited. Right now only page faults take the lock for reading; in the future this will be extended to some cases of page table destruction. I hope to switch the default MMU around 5.12-rc3 (some testing was delayed due to Chinese New Year). - Cleanups for MAXPHYADDR checks - Use static calls for vendor-specific callbacks - On AMD, use VMLOAD/VMSAVE to save and restore host state - Stop using deprecated jump label APIs - Workaround for AMD erratum that made nested virtualization unreliable - Support for LBR emulation in the guest - Support for communicating bus lock vmexits to userspace - Add support for SEV attestation command - Miscellaneous cleanups PPC: - Support for second data watchpoint on POWER10 - Remove some complex workarounds for buggy early versions of POWER9 - Guest entry/exit fixes ARM64: - Make the nVHE EL2 object relocatable - Cleanups for concurrent translation faults hitting the same page - Support for the standard TRNG hypervisor call - A bunch of small PMU/Debug fixes - Simplification of the early init hypercall handling Non-KVM changes (with acks): - Detection of contended rwlocks (implemented only for qrwlocks, because KVM only needs it for x86) - Allow __DISABLE_EXPORTS from assembly code - Provide a saner follow_pfn replacements for modules" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (192 commits) KVM: x86/xen: Explicitly pad struct compat_vcpu_info to 64 bytes KVM: selftests: Don't bother mapping GVA for Xen shinfo test KVM: selftests: Fix hex vs. decimal snafu in Xen test KVM: selftests: Fix size of memslots created by Xen tests KVM: selftests: Ignore recently added Xen tests' build output KVM: selftests: Add missing header file needed by xAPIC IPI tests KVM: selftests: Add operand to vmsave/vmload/vmrun in svm.c KVM: SVM: Make symbol 'svm_gp_erratum_intercept' static locking/arch: Move qrwlock.h include after qspinlock.h KVM: PPC: Book3S HV: Fix host radix SLB optimisation with hash guests KVM: PPC: Book3S HV: Ensure radix guest has no SLB entries KVM: PPC: Don't always report hash MMU capability for P9 < DD2.2 KVM: PPC: Book3S HV: Save and restore FSCR in the P9 path KVM: PPC: remove unneeded semicolon KVM: PPC: Book3S HV: Use POWER9 SLBIA IH=6 variant to clear SLB KVM: PPC: Book3S HV: No need to clear radix host SLB before loading HPT guest KVM: PPC: Book3S HV: Fix radix guest SLB side channel KVM: PPC: Book3S HV: Remove support for running HPT guest on RPT host without mixed mode support KVM: PPC: Book3S HV: Introduce new capability for 2nd DAWR KVM: PPC: Book3S HV: Add infrastructure to support 2nd DAWR ...
2021-02-21Merge tag 'arm64-upstream' of ↵Linus Torvalds60-696/+1258
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: - vDSO build improvements including support for building with BSD. - Cleanup to the AMU support code and initialisation rework to support cpufreq drivers built as modules. - Removal of synthetic frame record from exception stack when entering the kernel from EL0. - Add support for the TRNG firmware call introduced by Arm spec DEN0098. - Cleanup and refactoring across the board. - Avoid calling arch_get_random_seed_long() from add_interrupt_randomness() - Perf and PMU updates including support for Cortex-A78 and the v8.3 SPE extensions. - Significant steps along the road to leaving the MMU enabled during kexec relocation. - Faultaround changes to initialise prefaulted PTEs as 'old' when hardware access-flag updates are supported, which drastically improves vmscan performance. - CPU errata updates for Cortex-A76 (#1463225) and Cortex-A55 (#1024718) - Preparatory work for yielding the vector unit at a finer granularity in the crypto code, which in turn will one day allow us to defer softirq processing when it is in use. - Support for overriding CPU ID register fields on the command-line. * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (85 commits) drivers/perf: Replace spin_lock_irqsave to spin_lock mm: filemap: Fix microblaze build failure with 'mmu_defconfig' arm64: Make CPU_BIG_ENDIAN depend on ld.bfd or ld.lld 13.0.0+ arm64: cpufeatures: Allow disabling of Pointer Auth from the command-line arm64: Defer enabling pointer authentication on boot core arm64: cpufeatures: Allow disabling of BTI from the command-line arm64: Move "nokaslr" over to the early cpufeature infrastructure KVM: arm64: Document HVC_VHE_RESTART stub hypercall arm64: Make kvm-arm.mode={nvhe, protected} an alias of id_aa64mmfr1.vh=0 arm64: Add an aliasing facility for the idreg override arm64: Honor VHE being disabled from the command-line arm64: Allow ID_AA64MMFR1_EL1.VH to be overridden from the command line arm64: cpufeature: Add an early command-line cpufeature override facility arm64: Extract early FDT mapping from kaslr_early_init() arm64: cpufeature: Use IDreg override in __read_sysreg_by_encoding() arm64: cpufeature: Add global feature override facility arm64: Move SCTLR_EL1 initialisation to EL-agnostic code arm64: Simplify init_el2_state to be non-VHE only arm64: Move VHE-specific SPE setup to mutate_to_vhe() arm64: Drop early setting of MDSCR_EL2.TPMS ...
2021-02-21Merge tag 'irq-core-2021-02-15' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "Updates for the irq subsystem: - The usual new irq chip driver (Realtek RTL83xx) - Removal of sirfsoc and tango irq chip drivers - Conversion of the sun6i chip support to hierarchical irq domains - The usual fixes, improvements and cleanups all over the place" * tag 'irq-core-2021-02-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/imx: IMX_INTMUX should not default to y, unconditionally irqchip/loongson-pch-msi: Use bitmap_zalloc() to allocate bitmap irqchip/csky-mpintc: Prevent selection on unsupported platforms irqchip: Add support for Realtek RTL838x/RTL839x interrupt controller dt-bindings: interrupt-controller: Add Realtek RTL838x/RTL839x support irqchip/ls-extirq: add IRQCHIP_SKIP_SET_WAKE to the irqchip flags genirq: Use new tasklet API for resend_tasklet dt-bindings: qcom,pdc: Add compatible for SM8350 dt-bindings: qcom,pdc: Add compatible for SM8250 irqchip/sun6i-r: Add wakeup support irqchip/sun6i-r: Use a stacked irqchip driver dt-bindings: irq: sun6i-r: Add a compatible for the H3 dt-bindings: irq: sun6i-r: Split the binding from sun7i-nmi irqchip/gic-v3: Fix typos in PMR/RPR SCR_EL3.FIQ handling explanation irqchip: Remove sirfsoc driver irqchip: Remove sigma tango driver
2021-02-21Merge branch 'work.elf-compat' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull ELF compat updates from Al Viro: "Sanitizing ELF compat support, especially for triarch architectures: - X32 handling cleaned up - MIPS64 uses compat_binfmt_elf.c both for O32 and N32 now - Kconfig side of things regularized Eventually I hope to have compat_binfmt_elf.c killed, with both native and compat built from fs/binfmt_elf.c, with -DELF_BITS={64,32} passed by kbuild, but that's a separate story - not included here" * 'work.elf-compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: get rid of COMPAT_ELF_EXEC_PAGESIZE compat_binfmt_elf: don't bother with undef of ELF_ARCH Kconfig: regularize selection of CONFIG_BINFMT_ELF mips compat: switch to compat_binfmt_elf.c mips: don't bother with ELF_CORE_EFLAGS mips compat: don't bother with ELF_ET_DYN_BASE mips: KVM_GUEST makes no sense for 64bit builds... mips: kill unused definitions in binfmt_elf[on]32.c mips binfmt_elf*32.c: use elfcore-compat.h x32: make X32, !IA32_EMULATION setups able to execute x32 binaries [amd64] clean PRSTATUS_SIZE/SET_PR_FPVALID up properly elf_prstatus: collect the common part (everything before pr_reg) into a struct binfmt_elf: partially sanitize PRSTATUS_SIZE and SET_PR_FPVALID
2021-02-20Merge tag 'usb-5.12-rc1' of ↵Linus Torvalds2-0/+103
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB and Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt driver changes for 5.12-rc1. It's been an active set of development in these subsystems for the past few months: - loads of typec features added for new hardware - xhci features and bugfixes - dwc3 features added for more hardware support - dwc2 fixes and new hardware support - cdns3 driver updates for more hardware support - gadget driver cleanups and minor fixes - usb-serial fixes, new driver, and more devices supported - thunderbolt feature additions for new hardware - lots of other tiny fixups and additions The chrome driver changes are in here as well, as they depended on some of the typec changes, and the maintainer acked them. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (300 commits) dt-bindings: usb: mediatek: musb: add mt8516 compatbile dt-bindings: usb: mtk-xhci: add compatible for mt2701 and mt7623 dt-bindings: usb: mtk-xhci: add optional assigned clock properties Documentation: connector: Update the description of sink-vdos usb: misc: usb3503: Fix logic in usb3503_init() dt-bindings: usb: usb-device: fix typo in required properties usb: Replace lkml.org links with lore dt-bindings: usb: dwc3: add description for rk3328 dt-bindings: usb: convert rockchip,dwc3.txt to yaml usb: quirks: add quirk to start video capture on ELMO L-12F document camera reliable USB: quirks: sort quirk entries USB: serial: drop bogus to_usb_serial_port() checks USB: serial: make remove callback return void USB: serial: drop if with an always false condition usb: gadget: Assign boolean values to a bool variable usb: typec: tcpm: Get Sink VDO from fwnode dt-bindings: connector: Add SVDM VDO properties usb: typec: displayport: Fill the negotiated SVDM Version in the header usb: typec: ucsi: Determine common SVDM Version usb: typec: tcpm: Determine common SVDM Version ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-25 02:51:19 +0000