summaryrefslogtreecommitdiffstats
path: root/arch/arm64/mm/context.c
AgeCommit message (Collapse)AuthorFilesLines
2020-03-31Merge tag 'arm64-upstream' of ↵Linus Torvalds1-2/+30
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: "The bulk is in-kernel pointer authentication, activity monitors and lots of asm symbol annotations. I also queued the sys_mremap() patch commenting the asymmetry in the address untagging. Summary: - In-kernel Pointer Authentication support (previously only offered to user space). - ARM Activity Monitors (AMU) extension support allowing better CPU utilisation numbers for the scheduler (frequency invariance). - Memory hot-remove support for arm64. - Lots of asm annotations (SYM_*) in preparation for the in-kernel Branch Target Identification (BTI) support. - arm64 perf updates: ARMv8.5-PMU 64-bit counters, refactoring the PMU init callbacks, support for new DT compatibles. - IPv6 header checksum optimisation. - Fixes: SDEI (software delegated exception interface) double-lock on hibernate with shared events. - Minor clean-ups and refactoring: cpu_ops accessor, cpu_do_switch_mm() converted to C, cpufeature finalisation helper. - sys_mremap() comment explaining the asymmetric address untagging behaviour" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (81 commits) mm/mremap: Add comment explaining the untagging behaviour of mremap() arm64: head: Convert install_el2_stub to SYM_INNER_LABEL arm64: Introduce get_cpu_ops() helper function arm64: Rename cpu_read_ops() to init_cpu_ops() arm64: Declare ACPI parking protocol CPU operation if needed arm64: move kimage_vaddr to .rodata arm64: use mov_q instead of literal ldr arm64: Kconfig: verify binutils support for ARM64_PTR_AUTH lkdtm: arm64: test kernel pointer authentication arm64: compile the kernel with ptrauth return address signing kconfig: Add support for 'as-option' arm64: suspend: restore the kernel ptrauth keys arm64: __show_regs: strip PAC from lr in printk arm64: unwind: strip PAC from kernel addresses arm64: mask PAC bits of __builtin_return_address arm64: initialize ptrauth keys for kernel booting task arm64: initialize and switch ptrauth kernel keys arm64: enable ptrauth earlier arm64: cpufeature: handle conflicts based on capability arm64: cpufeature: Move cpu capability helpers inside C file ...
2020-03-02arm64: context: Fix ASID limit in boot messagesJean-Philippe Brucker1-5/+15
Since commit f88f42f853a8 ("arm64: context: Free up kernel ASIDs if KPTI is not in use"), the NUM_USER_ASIDS macro doesn't correspond to the effective number of ASIDs when KPTI is enabled. Get an accurate number of available ASIDs in an arch_initcall, once we've discovered all CPUs' capabilities and know if we still need to halve the ASID space for KPTI. Fixes: f88f42f853a8 ("arm64: context: Free up kernel ASIDs if KPTI is not in use") Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Will Deacon <will@kernel.org>
2020-02-27arm64: mm: convert cpu_do_switch_mm() to CMark Rutland1-2/+30
There's no reason that cpu_do_switch_mm() needs to be written as an assembly function, and having it as a C function would make it easier to maintain. This patch converts cpu_do_switch_mm() to C, removing code that this change makes redundant (e.g. the mmid macro). Since the header comment was stale and the prototype now implies all the necessary information, this comment is removed. The 'pgd_phys' argument is made a phys_addr_t to match the return type of virt_to_phys(). At the same time, post_ttbr_update_workaround() is updated to use IS_ENABLED(), which allows the compiler to figure out it can elide calls for !CONFIG_CAVIUM_ERRATUM_27456 builds. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> [catalin.marinas@arm.com: change comments from asm-style to C-style] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-01-16arm64: context: Free up kernel ASIDs if KPTI is not in useVladimir Murzin1-8/+30
We can extend user ASID space if it turns out that system does not require KPTI. We start with kernel ASIDs reserved because CPU caps are not finalized yet and free them up lazily on the next rollover if we confirm than KPTI is not in use. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234Thomas Gleixner1-12/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 503 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-09arm64: mm: Drop the unused cpu parameterShaokun Zhang1-4/+4
Cpu parameter is never used in flush_context, remove it. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-09-18arm64: mm: Support Common Not Private translationsVladimir Murzin1-0/+3
Common Not Private (CNP) is a feature of ARMv8.2 extension which allows translation table entries to be shared between different PEs in the same inner shareable domain, so the hardware can use this fact to optimise the caching of such entries in the TLB. CNP occupies one bit in TTBRx_ELy and VTTBR_EL2, which advertises to the hardware that the translation table entries pointed to by this TTBR are the same as every PE in the same inner shareable domain for which the equivalent TTBR also has CNP bit set. In case CNP bit is set but TTBR does not point at the same translation table entries for a given ASID and VMID, then the system is mis-configured, so the results of translations are UNPREDICTABLE. For kernel we postpone setting CNP till all cpus are up and rely on cpufeature framework to 1) patch the code which is sensitive to CNP and 2) update TTBR1_EL1 with CNP bit set. TTBR1_EL1 can be reprogrammed as result of hibernation or cpuidle (via __enable_mmu). For these two cases we restore CnP bit via __cpu_suspend_exit(). There are a few cases we need to care of changes in TTBR0_EL1: - a switch to idmap - software emulated PAN we rule out latter via Kconfig options and for the former we make sure that CNP is set for non-zero ASIDs only. Reviewed-by: James Morse <james.morse@arm.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> [catalin.marinas@arm.com: default y for CONFIG_ARM64_CNP] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-1/+1
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-01-23arm64: Move BP hardening to check_and_switch_contextMarc Zyngier1-2/+3
We call arm64_apply_bp_hardening() from post_ttbr_update_workaround, which has the unexpected consequence of being triggered on every exception return to userspace when ARM64_SW_TTBR0_PAN is selected, even if no context switch actually occured. This is a bit suboptimal, and it would be more logical to only invalidate the branch predictor when we actually switch to a different mm. In order to solve this, move the call to arm64_apply_bp_hardening() into check_and_switch_context(), where we're guaranteed to pick a different mm context. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-01-08arm64: Add skeleton to harden the branch predictor against aliasing attacksWill Deacon1-0/+2
Aliasing attacks against CPU branch predictors can allow an attacker to redirect speculative control flow on some CPUs and potentially divulge information from one context to another. This patch adds initial skeleton code behind a new Kconfig option to enable implementation-specific mitigations against these attacks for CPUs that are affected. Co-developed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-01-08arm64: Move post_ttbr_update_workaround to C codeMarc Zyngier1-0/+9
We will soon need to invoke a CPU-specific function pointer after changing page tables, so move post_ttbr_update_workaround out into C code to make this possible. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-01-05arm64: asid: Do not replace active_asids if already 0Catalin Marinas1-8/+11
Under some uncommon timing conditions, a generation check and xchg(active_asids, A1) in check_and_switch_context() on P1 can race with an ASID roll-over on P2. If P2 has not seen the update to active_asids[P1], it can re-allocate A1 to a new task T2 on P2. P1 ends up waiting on the spinlock since the xchg() returned 0 while P2 can go through a second ASID roll-over with (T2,A1,G2) active on P2. This roll-over copies active_asids[P1] == A1,G1 into reserved_asids[P1] and active_asids[P2] == A1,G2 into reserved_asids[P2]. A subsequent scheduling of T1 on P1 and T2 on P2 would match reserved_asids and get their generation bumped to G3: P1 P2 -- -- TTBR0.BADDR = T0 TTBR0.ASID = A0 asid_generation = G1 check_and_switch_context(T1,A1,G1) generation match check_and_switch_context(T2,A0,G0) new_context() ASID roll-over asid_generation = G2 flush_context() active_asids[P1] = 0 asid_map[A1] = 0 reserved_asids[P1] = A0,G0 xchg(active_asids, A1) active_asids[P1] = A1,G1 xchg returns 0 spin_lock_irqsave() allocated ASID (T2,A1,G2) asid_map[A1] = 1 active_asids[P2] = A1,G2 ... check_and_switch_context(T3,A0,G0) new_context() ASID roll-over asid_generation = G3 flush_context() active_asids[P1] = 0 asid_map[A1] = 1 reserved_asids[P1] = A1,G1 reserved_asids[P2] = A1,G2 allocated ASID (T3,A2,G3) asid_map[A2] = 1 active_asids[P2] = A2,G3 new_context() check_update_reserved_asid(A1,G1) matches reserved_asid[P1] reserved_asid[P1] = A1,G3 updated T1 ASID to (T1,A1,G3) check_and_switch_context(T2,A1,G2) new_context() check_and_switch_context(A1,G2) matches reserved_asids[P2] reserved_asids[P2] = A1,G3 updated T2 ASID to (T2,A1,G3) At this point, we have two tasks, T1 and T2 both using ASID A1 with the latest generation G3. Any of them is allowed to be scheduled on the other CPU leading to two different tasks with the same ASID on the same CPU. This patch changes the xchg to cmpxchg so that the active_asids is only updated if non-zero to avoid a race with an ASID roll-over on a different CPU. The ASID allocation algorithm has been formally verified using the TLA+ model checker (see https://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/kernel-tla.git/tree/asidalloc.tla for the spec). Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-12-11arm64: mm: Allocate ASIDs in pairsWill Deacon1-8/+17
In preparation for separate kernel/user ASIDs, allocate them in pairs for each mm_struct. The bottom bit distinguishes the two: if it is set, then the ASID will map only userspace. Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Laura Abbott <labbott@redhat.com> Tested-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-12-11arm64: mm: Remove pre_ttbr0_update_workaround for Falkor erratum #E1003Will Deacon1-11/+0
The pre_ttbr0_update_workaround hook is called prior to context-switching TTBR0 because Falkor erratum E1003 can cause TLB allocation with the wrong ASID if both the ASID and the base address of the TTBR are updated at the same time. With the ASID sitting safely in TTBR1, we no longer update things atomically, so we can remove the pre_ttbr0_update_workaround macro as it's no longer required. The erratum infrastructure and documentation is left around for #E1003, as it will be required by the entry trampoline code in a future patch. Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Laura Abbott <labbott@redhat.com> Tested-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-12-01arm64: context: Fix comments and remove pointless smp_wmb()Will Deacon1-11/+12
The comments in the ASID allocator incorrectly hint at an MP-style idiom using the asid_generation and the active_asids array. In fact, the synchronisation is achieved using a combination of an xchg operation and a spinlock, so update the comments and remove the pointless smp_wmb(). Cc: James Morse <james.morse@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-11-28arm64: mm: cleanup stale AIVIVT referencesMark Rutland1-1/+4
Since commit: 155433cb365ee466 ("arm64: cache: Remove support for ASID-tagged VIVT I-caches") ... the kernel no longer cares about AIVIVT I-caches, as these were removed from the architecture. This patch removes the stale references to such I-caches. The comment in flush_context() is also updated to clarify when and where the TLB invalidation occurs. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-03-20arm64: cache: Remove support for ASID-tagged VIVT I-cachesWill Deacon1-3/+0
As a recent change to ARMv8, ASID-tagged VIVT I-caches are removed retrospectively from the architecture. Consequently, we don't need to support them in Linux either. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-02-10arm64: Work around Falkor erratum 1003Christopher Covington1-0/+11
The Qualcomm Datacenter Technologies Falkor v1 CPU may allocate TLB entries using an incorrect ASID when TTBRx_EL1 is being updated. When the erratum is triggered, page table entries using the new translation table base address (BADDR) will be allocated into the TLB using the old ASID. All circumstances leading to the incorrect ASID being cached in the TLB arise when software writes TTBRx_EL1[ASID] and TTBRx_EL1[BADDR], a memory operation is in the process of performing a translation using the specific TTBRx_EL1 being written, and the memory operation uses a translation table descriptor designated as non-global. EL2 and EL3 code changing the EL1&0 ASID is not subject to this erratum because hardware is prohibited from performing translations from an out-of-context translation regime. Consider the following pseudo code. write new BADDR and ASID values to TTBRx_EL1 Replacing the above sequence with the one below will ensure that no TLB entries with an incorrect ASID are used by software. write reserved value to TTBRx_EL1[ASID] ISB write new value to TTBRx_EL1[BADDR] ISB write new value to TTBRx_EL1[ASID] ISB When the above sequence is used, page table entries using the new BADDR value may still be incorrectly allocated into the TLB using the reserved ASID. Yet this will not reduce functionality, since TLB entries incorrectly tagged with the reserved ASID will never be hit by a later instruction. Based on work by Shanker Donthineni <shankerd@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Christopher Covington <cov@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-11-21arm64: Disable TTBR0_EL1 during normal kernel executionCatalin Marinas1-1/+6
When the TTBR0 PAN feature is enabled, the kernel entry points need to disable access to TTBR0_EL1. The PAN status of the interrupted context is stored as part of the saved pstate, reusing the PSR_PAN_BIT (22). Restoring access to TTBR0_EL1 is done on exception return if returning to user or returning to a context where PAN was disabled. Context switching via switch_mm() must defer the update of TTBR0_EL1 until a return to user or an explicit uaccess_enable() call. Special care needs to be taken for two cases where TTBR0_EL1 is set outside the normal kernel context switch operation: EFI run-time services (via efi_set_pgd) and CPU suspend (via cpu_(un)install_idmap). Code has been added to avoid deferred TTBR0_EL1 switching as in switch_mm() and restore the reserved TTBR0_EL1 when uninstalling the special TTBR0_EL1. User cache maintenance (user_cache_maint_handler and __flush_cache_user_range) needs the TTBR0_EL1 re-instated since the operations are performed by user virtual address. This patch also removes a stale comment on the switch_mm() function. Cc: Will Deacon <will.deacon@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-06-21arm64: update ASID limitJean-Philippe Brucker1-3/+6
During a rollover, we mark the active ASID on each CPU as reserved, before allocating a new ID for the task that caused the rollover. This means that with N CPUs, we can only guarantee the new task to obtain a valid ASID if we have at least N+1 ASIDs. Update this limit in the initcall check. Note that this restriction was introduced by commit 8e648066 on the arch/arm side, which disallow re-using the previously active ASID on the local CPU, as it would introduce a TLB race. In addition, we only dispose of NUM_USER_ASIDS-1, since ASID 0 is reserved. Add this restriction as well. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-04-15arm64: Add cpu_panic_kernel helperSuzuki K Poulose1-2/+1
During the activation of a secondary CPU, we could report serious configuration issues and hence request to crash the kernel. We do this for CPU ASID bit check now. We will need it also for handling mismatched exception levels for the CPUs with VHE. Hence, add a helper to do the same for reusability. Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-04arm64: make mrs_s prefixing implicit in read_cpuidMark Rutland1-1/+1
Commit 0f54b14e76f5302a ("arm64: cpufeature: Change read_cpuid() to use sysreg's mrs_s macro") changed read_cpuid to require a SYS_ prefix on register names, to allow manual assembly of registers unknown by the toolchain, using tables in sysreg.h. This interacts poorly with commit 42b55734030c1f72 ("efi/arm64: Check for h/w support before booting a >4 KB granular kernel"), which is curretly queued via the tip tree, and uses read_cpuid without a SYS_ prefix. Due to this, a build of next-20160304 fails if EFI and 64K pages are selected. To avoid this issue when trees are merged, move the required SYS_ prefixing into read_cpuid, and revert all of the updated callsites to pass plain register names. This effectively reverts the bulk of commit 0f54b14e76f5302a. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: James Morse <james.morse@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-02-25arm64: Rename cpuid_feature field extract routinesSuzuki K Poulose1-1/+1
Now that we have a clear understanding of the sign of a feature, rename the routines to reflect the sign, so that it is not misused. The cpuid_feature_extract_field() now accepts a 'sign' parameter. Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-02-25arm64: Ensure the secondary CPUs have safe ASIDBits sizeSuzuki K Poulose1-0/+18
Adds a hook for checking whether a secondary CPU has the features used already by the kernel during early boot, based on the boot CPU and plugs in the check for ASID size. The ID_AA64MMFR0_EL1:ASIDBits determines the size of the mm context id and is used in the early boot to make decisions. The value is picked up from the Boot CPU and cannot be delayed until other CPUs are up. If a secondary CPU has a smaller size than that of the Boot CPU, things will break horribly and the usual SANITY check is not good enough to prevent the system from crashing. So, crash the system with enough information. Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-02-25arm64: Add helper for extracting ASIDBitsSuzuki K Poulose1-13/+23
Add a helper to extract ASIDBits on the current cpu Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-02-18arm64: cpufeature: Change read_cpuid() to use sysreg's mrs_s macroJames Morse1-1/+1
Older assemblers may not have support for newer feature registers. To get round this, sysreg.h provides a 'mrs_s' macro that takes a register encoding and generates the raw instruction. Change read_cpuid() to use mrs_s in all cases so that new registers don't have to be a special case. Including sysreg.h means we need to move the include and definition of read_cpuid() after the #ifndef __ASSEMBLY__ to avoid syntax errors in vmlinux.lds. Signed-off-by: James Morse <james.morse@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-11-26arm64: mm: keep reserved ASIDs in sync with mm after multiple rolloversWill Deacon1-12/+26
Under some unusual context-switching patterns, it is possible to end up with multiple threads from the same mm running concurrently with different ASIDs: 1. CPU x schedules task t with mm p containing ASID a and generation g This task doesn't block and the CPU doesn't context switch. So: * per_cpu(active_asid, x) = {g,a} * p->context.id = {g,a} 2. Some other CPU generates an ASID rollover. The global generation is now (g + 1). CPU x is still running t, with no context switch and so per_cpu(reserved_asid, x) = {g,a} 3. CPU y schedules task t', which shares mm p with t. The generation mismatches, so we take the slowpath and hit the reserved ASID from CPU x. p is then updated so that p->context.id = {g + 1,a} 4. CPU y schedules some other task u, which has an mm != p. 5. Some other CPU generates *another* CPU rollover. The global generation is now (g + 2). CPU x is still running t, with no context switch and so per_cpu(reserved_asid, x) = {g,a}. 6. CPU y once again schedules task t', but now *fails* to hit the reserved ASID from CPU x because of the generation mismatch. This results in a new ASID being allocated, despite the fact that t is still running on CPU x with the same mm. Consequently, TLBIs (e.g. as a result of CoW) will not be synchronised between the two threads. This patch fixes the problem by updating all of the matching reserved ASIDs when we hit on the slowpath (i.e. in step 3 above). This keeps the reserved ASIDs in-sync with the mm and avoids the problem. Reported-by: Tony Thompson <anthony.thompson@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-10-07arm64: mm: kill mm_cpumask usageWill Deacon1-2/+0
mm_cpumask isn't actually used for anything on arm64, so remove all the code trying to keep it up-to-date. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-10-07arm64: switch_mm: simplify mm and CPU checksWill Deacon1-1/+1
switch_mm performs some checks to try and avoid entering the ASID allocator: (1) If we're switching to the init_mm (no user mappings), then simply set a reserved TTBR0 value with no page table (the zero page) (2) If prev == next *and* the mm_cpumask indicates that we've run on this CPU before, then we can skip the allocator. However, there is plenty of redundancy here. With the new ASID allocator, if prev == next, then we know that our ASID is valid and do not need to worry about re-allocation. Consequently, we can drop the mm_cpumask check in (2) and move the prev == next check before the init_mm check, since if prev == next == init_mm then there's nothing to do. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-10-07arm64: mm: rewrite ASID allocator and MM context-switching codeWill Deacon1-93/+145
Our current switch_mm implementation suffers from a number of problems: (1) The ASID allocator relies on IPIs to synchronise the CPUs on a rollover event (2) Because of (1), we cannot allocate ASIDs with interrupts disabled and therefore make use of a TIF_SWITCH_MM flag to postpone the actual switch to finish_arch_post_lock_switch (3) We run context switch with a reserved (invalid) TTBR0 value, even though the ASID and pgd are updated atomically (4) We take a global spinlock (cpu_asid_lock) during context-switch (5) We use h/w broadcast TLB operations when they are not required (e.g. in flush_context) This patch addresses these problems by rewriting the ASID algorithm to match the bitmap-based arch/arm/ implementation more closely. This in turn allows us to remove much of the complications surrounding switch_mm, including the ugly thread flag. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-10-07arm64: flush: use local TLB and I-cache invalidationWill Deacon1-2/+2
There are a number of places where a single CPU is running with a private page-table and we need to perform maintenance on the TLB and I-cache in order to ensure correctness, but do not require the operation to be broadcast to other CPUs. This patch adds local variants of tlb_flush_all and __flush_icache_all to support these use-cases and updates the callers respectively. __local_flush_icache_all also implies an isb, since it is intended to be used synchronously. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: David Daney <david.daney@cavium.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-07-27arm64: force CONFIG_SMP=y and remove redundant #ifdefsWill Deacon1-16/+0
Nobody seems to be producing !SMP systems anymore, so this is just becoming a source of kernel bugs, particularly if people want to use coherent DMA with non-shared pages. This patch forces CONFIG_SMP=y for arm64, removing a modest amount of code in the process. Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-06-12arm64: Do not attempt to use init_mm in reset_context()Catalin Marinas1-0/+8
After secondary CPU boot or hotplug, the active_mm of the idle thread is &init_mm. The init_mm.pgd (swapper_pg_dir) is only meant for TTBR1_EL1 and must not be set in TTBR0_EL1. Since when active_mm == &init_mm the TTBR0_EL1 is already set to the reserved value, there is no need to perform any context reset. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: <stable@vger.kernel.org>
2012-09-17arm64: Process managementCatalin Marinas1-0/+159
The patch adds support for thread creation and context switching. The context switching CPU specific code is introduced with the CPU support patch (part of the arch/arm64/mm/proc.S file). AArch64 supports ASID-tagged TLBs and the ASID can be either 8 or 16-bit wide (detectable via the ID_AA64AFR0_EL1 register). Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-08 13:46:57 +0000