summaryrefslogtreecommitdiffstats
path: root/arch/arm64/configs
AgeCommit message (Collapse)AuthorFilesLines
2021-11-03Merge tag 'defconfig-5.16' of ↵Linus Torvalds1-4/+23
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM defconfig updates from Arnd Bergmann: "These are the usual changes to enable newly added driver by default, and to do some housekeeping around changing Kconfig symbols" * tag 'defconfig-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (33 commits) arm64: defconfig: Enable Qualcomm LMH driver arm64: defconfig: Enable Qualcomm prima/pronto drivers arm64: defconfig: Enable Sleep stats driver arm64: defconfig: Visconti: Enable PCIe host controller ARM: configs: aspeed: Remove unused USB gadget devices ARM: config: aspeed: Enable Network Block Device ARM: configs: aspeed: Enable pstore and lockup detectors ARM: configs: aspeed: Enable commonly used drivers ARM: configs: aspeed: Disable IPV6 SIT device ARM: imx_v6_v7_defconfig: Enable HID I2C arm64: defconfig: Enable QTI SC7280 pinctrl, gcc and interconnect arm64: defconfig: Disable firmware sysfs fallback ARM: mvebu_v7_defconfig: rebuild default configuration ARM: mvebu_v7_defconfig: enable mtd physmap arm64: defconfig: Enable few Tegra210 based AHUB drivers arm64: defconfig: drop obsolete ARCH_* configs ARM: imx_v6_v7_defconfig: enable bpf syscall and cgroup bpf ARM: imx_v6_v7_defconfig: build imx sdma driver as module ARM: imx_v6_v7_defconfig: rebuild default configuration ARM: imx_v6_v7_defconfig: change snd soc tlv320aic3x to i2c variant ...
2021-10-28BackMerge tag 'v5.15-rc7' into drm-nextDave Airlie1-1/+0
The msm next tree is based on rc3, so let's just backmerge rc7 before pulling it in. Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-10-26Merge tag 'qcom-arm64-defconfig-for-5.16' of ↵Arnd Bergmann1-1/+10
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfigs Qualcomm ARM64 defconfig updates for v5.16 The major change here is the disabling of the firmware loades user space fallback, this is done as arm64 is the only platform with this flag enabled and as a result doesn't play nice with standard distributions. It then enables the new limits driver, which controls the hardware based thermal mitigation on a range of Qualcomm platforms. The prima/pronto WiFi and Bluetooth drivers are enabled to ensure these features works out of the box, now that the last details in the dts are landed. The new driver for acquiring sleep stats is enabled to facilitate the various efforts on getting these platforms into low power mode. Lastly the base SC7280 drivers needed to simply boot this platform are enabled. * tag 'qcom-arm64-defconfig-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: defconfig: Enable Qualcomm LMH driver arm64: defconfig: Enable Qualcomm prima/pronto drivers arm64: defconfig: Enable Sleep stats driver arm64: defconfig: Enable QTI SC7280 pinctrl, gcc and interconnect arm64: defconfig: Disable firmware sysfs fallback Link: https://lore.kernel.org/r/20211026134953.1204327-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-21arm64: defconfig: Enable Qualcomm LMH driverBjorn Andersson1-0/+1
With the introduction of LMH in '36c6581214c4 ("arm64: dts: qcom: sdm845: Add support for LMh node")' the CPUfreq gained a reference for the two interrupts from the LMh. This means that if the LMh driver isn't enabled CPUfreq will not probe and there's no frequency scaling. Enable LMh to make CPUfreq functional again on SDM845. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-By: Steev Klimaszewski <steev@kali.org> Reviewed-and-Tested-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Link: https://lore.kernel.org/r/20211017204036.2761122-1-bjorn.andersson@linaro.org
2021-10-21arm64: defconfig: Enable Qualcomm prima/pronto driversBjorn Andersson1-0/+5
The Qualcomm prima/pronto drivers consists of a remoteproc driver boot the combined WiFi and Bluetooth firmware on the related co-processor, a control driver to load calibration and settings firmware, the wcn36xx WiFi driver and the SMD based Bluetooth driver. Enable these in the defconfig to provide Bluetooth and WiFi on devices such as the Qualcomm Dragonboard 410c. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20211008192840.3593362-1-bjorn.andersson@linaro.org
2021-10-20Merge tag 'visconti-arm-defconfig-for-v5.16' of ↵Arnd Bergmann1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/iwamatsu/linux-visconti into arm/defconfigs Visconti defconfig updates for v5.16 - Enable Visconti's PCIe host controller in the ARM64 defconfig * tag 'visconti-arm-defconfig-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/iwamatsu/linux-visconti: arm64: defconfig: Visconti: Enable PCIe host controller Link: https://lore.kernel.org/r/YWoIf4xPoQtLhC3x@toshiba.co.jp Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-16arm64: defconfig: Enable Sleep stats driverMaulik Shah1-0/+1
Enable Sleep stats driver. The driver gives statistics for various low power modes on Qualcomm Technologies, Inc. (QTI) SoCs. Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1634107104-22197-4-git-send-email-mkshah@codeaurora.org
2021-10-16arm64: defconfig: Visconti: Enable PCIe host controllerNobuhiro Iwamatsu1-0/+1
Enable Visconti's PCIe host controller in the ARM64 defconfig. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Link: https://lore.kernel.org/r/20210907042340.1525711-1-nobuhiro1.iwamatsu@toshiba.co.jp Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
2021-10-14arm64: defconfig: Enable QTI SC7280 pinctrl, gcc and interconnectSai Prakash Ranjan1-0/+3
Enable the QTI SC7280 pinctrl, gcc and interconnect drivers required for kernel to boot to console. Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211007052812.3717-1-quic_saipraka@quicinc.com
2021-10-14arm64: defconfig: Disable firmware sysfs fallbackBjorn Andersson1-1/+0
Part of the enablement of SDMA on the IMX platforms, '7f4e4afa140c ("arm64: defconfig: Enable SDMA on i.mx8mq/8mm")' also enabled CONFIG_FW_LOADER_USER_HELPER_FALLBACK, to allow "firmware loaded by udev". Unfortunately having the fallback enabled does, due to the 60 second timeout, essentially requiring userspace to provide a firmware loader. But systemd dropped the support for this interface back in 2014 and because arm64 is the only architecture that has this enabled, there doesn't seem to be any standard solution available. Examples of this problem can be found in e.g. the ath10k driver, which with a standard distro can take about 10 minutes before wlan0 appears. The alternative to this patch would be to change these drivers to use firmware_request_direct(), to avoid the sysfs fallback. But that would prevent other systems, such as Android, to rely on a userspace firmware loader to pick the firmware from a non-standard place, with just a custom defconfig. This patch therefor attempts to align the arm64 defconfig will all other architectures in the upstream kernel. Cc: Robin Gong <yibin.gong@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Shawn Guo <shawnguo@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210930215300.60290-1-bjorn.andersson@linaro.org
2021-10-12Merge tag 'tegra-for-5.16-arm64-defconfig' of ↵Arnd Bergmann1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfigs arm64: tegra: Default configuration changes for v5.16-rc1 This enables drivers for the various audio processors found on Tegra210 and later. * tag 'tegra-for-5.16-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: defconfig: Enable few Tegra210 based AHUB drivers Link: https://lore.kernel.org/r/20211008201132.1678814-8-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-07arm64: defconfig: Enable few Tegra210 based AHUB driversSameer Pujar1-0/+5
Enable configs for following modules: * SFC (Sampling Frequency Converter) * MVC (Master Volume Control) * AMX (Audio Multiplexer) * ADX (Audio Demultiplexer) * Mixer These configs are used on Tegra186 and later SoCs as well. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-10-07arm64: defconfig: drop obsolete ARCH_* configsZenghui Yu1-3/+0
Per commit 4a9a1a5602d8 ("arm64: socfpga: merge Agilex and N5X into ARCH_INTEL_SOCFPGA") and commit 89d4f98ae90d ("ARM: remove zte zx platform"), they can be dropped from defconfig now. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-05drivers: bus: Delete CONFIG_SIMPLE_PM_BUSSaravana Kannan1-1/+0
The simple-pm-bus driver is mandatory for CONFIG_OF based platforms to work with fw_devlink. So, always compile it in for CONFIG_OF and delete the config since it's no longer necessary. Tested-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Damien Le Moal <damien.lemoal@wdc.com> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20210929000735.585237-3-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-28arm64: defconfig: Enable RZG2L_ADCLad Prabhakar1-0/+1
Enable ADC driver support for Renesas RZ/G2L based platforms. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20210927193551.22422-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-09-28arm64: defconfig: Enable SND_SOC_WM8978Biju Das1-0/+1
WM8978 audio CODEC is supported on RZ/G2L SMARC EVK. Enable it on arm64 defconfig as module. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20210920093905.10878-1-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-09-24arm64: defconfig: Enable SOUND_SOC_RZBiju Das1-0/+1
Enable sound driver support for Renesas RZ/G2L based platforms. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20210920093905.10878-2-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-09-24arm64: defconfig: Enable RZ_DMACBiju Das1-0/+1
Enable DMAC driver support for Renesas RZ/G2L based platforms. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20210920093605.8906-1-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-09-24arm64: defconfig: Add Renesas TPU as moduleWolfram Sang1-0/+1
For better build and test coverage. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20210915153143.25184-1-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-09-24arm64: defconfig: Enable RZ/G2L USBPHY control driverBiju Das1-0/+1
RZ/G2L SoC supports USBPHY control,so enable it in ARM64 defconfig. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20210812151808.7916-2-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-09-24arm64: defconfig: Enable RIICBiju Das1-0/+1
Enable RIIC driver support for Renesas RZ/G2L based platforms. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20210611165624.30749-6-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-09-20arm64: defconfig: Everyone who had PANEL_SIMPLE now gets PANEL_EDPDouglas Anderson1-0/+1
In the patch ("drm/panel-simple-edp: Split eDP panels out of panel-simple") we split the PANEL_SIMPLE driver in 2. Let's enable the new config. Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.6.Ied5c4da3ea36f8c49343176eda342027b6f19586@changeid
2021-08-04arm64: defconfig: Enable Qualcomm MSM8996 CPU clock driverBjorn Andersson1-0/+1
The MSM8996 supports CPU frequency scaling, so enable the clock driver for this. Acked-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210804193042.1155398-1-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-06-23Merge tag 'qcom-arm64-defconfig-for-5.14-1' of ↵Olof Johansson1-0/+2
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig Additional Qualcomm ARM64 defconfig udpate for v5.14 The Qualcomm Robotics RB3 Development Kit has a Renesas USB HUB on one of the PCIe busses, which requires the releated driver to be enabled to provide functional Ethernet and additional USB host ports. * tag 'qcom-arm64-defconfig-for-5.14-1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: defconfig: Enable renesas usb xhci pci host controller Link: https://lore.kernel.org/r/20210621165015.943060-1-bjorn.andersson@linaro.org Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-16Merge tag 'visconti-arm-defconfig-for-v5.14' of ↵Olof Johansson1-0/+2
https://git.kernel.org/pub/scm/linux/kernel/git/iwamatsu/linux-visconti into arm/defconfig Visconti defconfig updates for v5.14 - Enable Visconti's PWM in the ARM64 defconfig as a module. - Enable Visconti's GPIO in the ARM64 defconfig. * tag 'visconti-arm-defconfig-for-v5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/iwamatsu/linux-visconti: arm64: defconfig: Visconti: Enable GPIO arm64: defconfig: Visconti: Enable PWM Link: https://lore.kernel.org/r/20210615231232.pllzlqoamkmnsqq6@toshiba.co.jp Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-15arm64: defconfig: Enable renesas usb xhci pci host controllerVinod Koul1-0/+2
96Boards RB3 has a USB XHCI PCI Renesas host controller. This controller requires firmware to be loaded on its ROM/RAM, so enable the module CONFIG_USB_XHCI_PCI_RENESAS. This depends on CONFIG_USB_XHCI_PCI so enable that as well. Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20210615081749.3210344-1-vkoul@kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-06-15Merge tag 'qcom-arm64-defconfig-for-5.14' of ↵Olof Johansson1-0/+5
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig Qualcomm ARM64 defconfig udpates for v5.14 This enables VADC, audio codecs and Venus (video decoder) found on MSM8916 among others and the SM8350 interconnect provider driver. * tag 'qcom-arm64-defconfig-for-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: defconfig: add drivers needed for DragonBoard410c arm64: defconfig: qcom: enable interconnect for SM8350 Link: https://lore.kernel.org/r/20210614223704.393042-1-bjorn.andersson@linaro.org Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-15Merge tag 'samsung-defconfig-5.14' of ↵Olof Johansson1-0/+2
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/defconfig Samsung defconfig changes for v5.14 1. Enable Exynos Universal Flash Storage (UFS) driver for Exynos7 arm64 boards. 2. Restore framebuffer support in exynos_defconfig. * tag 'samsung-defconfig-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: exynos_defconfig: restore framebuffer support arm64: defconfig: Enable Exynos UFS driver Link: https://lore.kernel.org/r/20210614193309.20248-3-krzysztof.kozlowski@canonical.com Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-15Merge tag 'imx-defconfig-5.14' of ↵Olof Johansson1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig i.MX defconfig update for 5.14: - Enable LT8912B DRM bridge and Layerscape EDAC driver support in arm64 defconfig. - Enable WiFi ath10k SDIO driver in imx_v6_v7_defconfig. * tag 'imx-defconfig-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx_v6_v7_defconfig: Select the Wifi ath10k sdio driver arm64: defconfig: enable Layerscape EDAC driver arm64: defconfig: Enable LT8912B DRM bridge driver Link: https://lore.kernel.org/r/20210613082544.16067-6-shawnguo@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-15arm64: defconfig: Visconti: Enable GPIONobuhiro Iwamatsu1-0/+1
Enable Visconti's GPIO in the ARM64 defconfig. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
2021-06-15arm64: defconfig: Visconti: Enable PWMNobuhiro Iwamatsu1-0/+1
Enable Visconti's PWM in the ARM64 defconfig as a module. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
2021-06-14arm64: defconfig: add drivers needed for DragonBoard410cMarek Szyprowski1-0/+4
Add modules with drivers needed for DragonBoard410c board (arch/arm64/boot/dts/qcom/apq8016-sbc.dts). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20210528140625.6972-1-m.szyprowski@samsung.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-06-12Merge tag 'v5.13-next-defconfig' of ↵Olof Johansson1-1/+1
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/defconfig - Delete MTK_PMIC_WRAP added twice. - Set MMC_MTK as built-in to be able to boot from MMC device. * tag 'v5.13-next-defconfig' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm64: defconfig: Allow Mediatek boards to boot from the mmc arm64: defconfig: Do not override the MTK_PMIC_WRAP symbol Link: https://lore.kernel.org/r/ad6f7f4e-7e4d-08b9-8781-71bd78444929@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-10arm64: defconfig: Enable ARCH_R9A07G044Lad Prabhakar1-0/+1
Enable the Renesas RZ/G2L SoC variants in the ARM64 defconfig. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20210609153230.6967-6-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-06-02arm64: defconfig: Enable Exynos UFS driverAlim Akhtar1-0/+2
Enable the Exynos UFS controller and PHY configs. They need to be buildin to ensure UFS devices gets detected on exynos7 and its variant boards. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20210531170057.7730-1-alim.akhtar@samsung.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-05-31arm64: defconfig: qcom: enable interconnect for SM8350Vinod Koul1-0/+1
Enable the interconnect for SM8350 as a module Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20210510070725.3839459-1-vkoul@kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-25arm64: defconfig: Enable usb2_clksel for R-Car Gen3 and RZ/G2Adam Ford1-0/+1
There is a clock driver that's needed when using an external USB reference clock called usb2_clksel. Enable it in the defconfig. Signed-off-by: Adam Ford <aford173@gmail.com> Link: https://lore.kernel.org/r/20210513114617.30191-3-aford173@gmail.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-05-22arm64: defconfig: enable Layerscape EDAC driverMichael Walle1-0/+1
Most Layerscape SoCs support ECC error reporting for the memory controller. Enable the corresponding module. In particular, this will enable EDAC support on the Kontron sl28 board which comes with ECC memory. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-05-14arm64: defconfig: Allow Mediatek boards to boot from the mmcEnric Balletbo i Serra1-0/+1
Enable the MMC_MTK option necessary to boot Mediatek boards from the mmc. Booting from the mmc is the common method used for a bunch of boards, specially Chromebooks, to boot from. Hence this driver is built-in. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Link: https://lore.kernel.org/r/20210423075250.2616275-1-enric.balletbo@collabora.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-05-14arm64: defconfig: Do not override the MTK_PMIC_WRAP symbolEnric Balletbo i Serra1-1/+0
Commit 'fbbe38309d56 ("arm64: defconfig: Allow mt8173-based boards to boot from usb")' added the MTK_PMIC_WRAP config built-in. It needs to be built-in in order to be able to boot from USB or the MMC without needing a ramdisk, but that symbol was already defined as a module so now we are getting the following warning: arch/arm64/configs/defconfig:996:warning: override: reassigning to symbol MTK_PMIC_WRAP Remove the MTK_PMIC_WRAP=m from the defconfig to remove the error. Fixes: fbbe38309d56 ("arm64: defconfig: Allow mt8173-based boards to boot from usb") Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Link: https://lore.kernel.org/r/20210423075201.2616023-1-enric.balletbo@collabora.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-05-13arm64: defconfig: Enable LT8912B DRM bridge driverAdrien Grassein1-0/+1
This driver is used by the Nitrogen8 SBC. Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-04-26Merge tag 'arm-apple-m1-5.13' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM Apple M1 platform support from Arnd Bergmann: "The Apple M1 is the processor used it all current generation Apple Macintosh computers. Support for this platform so far is rudimentary, but it boots and can use framebuffer and serial console over a special USB cable. Support for several essential on-chip devices (USB, PCIe, IOMMU, NVMe) is work in progress but was not ready in time. A very detailed description of what works is in the commit message of commit 1bb2fd3880d4 ("Merge tag 'm1-soc-bringup-v5' [..]") and on the AsahiLinux wiki" Link: https://lore.kernel.org/linux-arm-kernel/bdb18e9f-fcd7-1e31-2224-19c0e5090706@marcan.st/ * tag 'arm-apple-m1-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: asm-generic/io.h: Unbork ioremap_np() declaration arm64: apple: Add initial Apple Mac mini (M1, 2020) devicetree dt-bindings: display: Add apple,simple-framebuffer arm64: Kconfig: Introduce CONFIG_ARCH_APPLE irqchip/apple-aic: Add support for the Apple Interrupt Controller dt-bindings: interrupt-controller: Add DT bindings for apple-aic arm64: Move ICH_ sysreg bits from arm-gic-v3.h to sysreg.h of/address: Add infrastructure to declare MMIO as non-posted asm-generic/io.h: implement pci_remap_cfgspace using ioremap_np arm64: Implement ioremap_np() to map MMIO as nGnRnE docs: driver-api: device-io: Document ioremap() variants & access funcs docs: driver-api: device-io: Document I/O access functions asm-generic/io.h: Add a non-posted variant of ioremap() arm64: arch_timer: Implement support for interrupt-names dt-bindings: timer: arm,arch_timer: Add interrupt-names support arm64: cputype: Add CPU implementor & types for the Apple M1 cores dt-bindings: arm: cpus: Add apple,firestorm & icestorm compatibles dt-bindings: arm: apple: Add bindings for Apple ARM platforms dt-bindings: vendor-prefixes: Add apple prefix
2021-04-26Merge tag 'arm-drivers-5.13' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "Updates for SoC specific drivers include a few subsystems that have their own maintainers but send them through the soc tree: TEE/OP-TEE: - Add tracepoints around calls to secure world Memory controller drivers: - Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms - Add debug statistics to Tegra20 memory controller - Update Tegra bindings and convert to dtschema ARM SCMI Firmware: - Support for modular SCMI protocols and vendor specific extensions - New SCMI IIO driver - Per-cpu DVFS The other driver changes are all from the platform maintainers directly and reflect the drivers that don't fit into any other subsystem as well as treewide changes for a particular platform. SoCFPGA: - Various cleanups contributed by Krzysztof Kozlowski Mediatek: - add MT8183 support to mutex driver - MMSYS: use per SoC array to describe the possible routing - add MMSYS support for MT8183 and MT8167 - add support for PMIC wrapper with integrated arbiter - add support for MT8192/MT6873 Tegra: - Bug fixes to PMC and clock drivers NXP/i.MX: - Update SCU power domain driver to keep console domain power on. - Add missing ADC1 power domain to SCU power domain driver. - Update comments for single global power domain in SCU power domain driver. - Add i.MX51/i.MX53 unique id support to i.MX SoC driver. NXP/FSL SoC driver updates for v5.13 - Add ACPI support for RCPM driver - Use generic io{read,write} for QE drivers after performance optimized for PowerPC - Fix QBMAN probe to cleanup HW states correctly for kexec - Various cleanup and style fix for QBMAN/QE/GUTS drivers OMAP: - Preparation to use devicetree for genpd - ti-sysc needs iorange check improved when the interconnect target module has no control registers listed - ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to avoid issues with missing resources and unnecessary deferred probe - ti-sysc debug option can now detect more devices - ti-sysc now warns if an old incomplete devicetree data is found as we now rely on it being complete for am3 and 4 - soc init code needs to check for prcm and prm nodes for omap4/5 and dra7 - omap-prm driver needs to enable autoidle retention support for omap4 - omap5 clocks are missing gpmc and ocmc clock registers - pci-dra7xx now needs to use builtin_platform_driver instead of using builtin_platform_driver_probe for deferred probe to work Raspberry Pi: - Fix-up all RPi firmware drivers so as for unbind to happen in an orderly fashion - Support for RPi's PoE hat PWM bus Qualcomm - Improved detection for SCM calling conventions - Support for OEM specific wifi firmware path - Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP" * tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits) soc: aspeed: fix a ternary sign expansion bug memory: mtk-smi: Add device-link between smi-larb and smi-common memory: samsung: exynos5422-dmc: handle clk_set_parent() failure memory: renesas-rpc-if: fix possible NULL pointer dereference of resource clk: socfpga: fix iomem pointer cast on 64-bit soc: aspeed: Adapt to new LPC device tree layout pinctrl: aspeed-g5: Adapt to new LPC device tree layout ipmi: kcs: aspeed: Adapt to new LPC DTS layout ARM: dts: Remove LPC BMC and Host partitions dt-bindings: aspeed-lpc: Remove LPC partitioning soc: fsl: enable acpi support in RCPM driver soc: qcom: mdt_loader: Detect truncated read of segments soc: qcom: mdt_loader: Validate that p_filesz < p_memsz soc: qcom: pdr: Fix error return code in pdr_register_listener firmware: qcom_scm: Fix kernel-doc function names to match firmware: qcom_scm: Suppress sysfs bind attributes firmware: qcom_scm: Workaround lack of "is available" call on SC7180 firmware: qcom_scm: Reduce locking section for __get_convention() firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers" ...
2021-04-26Merge tag 'arm-defconfig-5.13' of ↵Linus Torvalds1-1/+34
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM defconfig updates from Arnd Bergmann: "The usual set of defconfig updates, enabling newly added drivers. There are platform updates for at91, omap, ux500 and qcom platforms, and a number of changes to the arm64 defconfig" * tag 'arm-defconfig-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (34 commits) ARM: configs: qcom_defconfig: Reduce CMA size to 64MB ARM: configs: qcom_defconfig: Enable GLINK SMEM driver ARM: configs: qcom_defconfig: Enable SDX55 interconnect driver ARM: configs: qcom_defconfig: Enable Q6V5_PAS remoteproc driver ARM: configs: qcom_defconfig: Enable CPUFreq support ARM: configs: qcom_defconfig: Enable SDX55 A7 PLL and APCS clock driver ARM: configs: qcom_defconfig: Enable APCS IPC mailbox driver ARM: configs: Remove REGULATOR_USERSPACE_CONSUMER ARM: configs: ux500: Update for new drivers arm64: defconfig: Enable options to support panel display for Mediatek Chromebooks arm64: defconfig: Allow mt8173-based boards to boot from usb ARM: configs: at91: Modernize UBI defconfig part ARM: configs: at91: Add USB Video webcam class ARM: configs: at91: Add mtd tests as modules ARM: configs: at91: sama5: Add audio MIKROE PROTO board ARM: configs: at91: sama5: Enable LAN78XX as module ARM: configs: at91: sama5: PIOBU as built-in ARM: configs: at91: sama5: MCP16502 regulator as built-in ARM: configs: at91: sama5: enable the Hantro G1 engine ARM: configs: at91: sama5: update with savedefconfig ...
2021-04-08Merge tag 'qcom-arm64-defconfig-for-5.13' of ↵Arnd Bergmann1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig Qualcomm ARM64 defconfig udpate for 5.13 This enables the SM8350 TLMM and GCC drivers, needed to boot the platform. * tag 'qcom-arm64-defconfig-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: defconfig: Enable Qualcomm SM8350 TLMM and GCC Link: https://lore.kernel.org/r/20210404164841.712845-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-08arm64: Kconfig: Introduce CONFIG_ARCH_APPLEHector Martin1-0/+1
This adds a Kconfig option to toggle support for Apple ARM SoCs. At this time this targets the M1 and later "Apple Silicon" Mac SoCs. Signed-off-by: Hector Martin <marcan@marcan.st>
2021-04-01Merge tag 'v5.12-next-defconfig' of ↵Arnd Bergmann1-0/+15
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/defconfig Enable option to boot MediaTek based chromebook (mt8173 and mt8183) with defconfig * tag 'v5.12-next-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm64: defconfig: Enable options to support panel display for Mediatek Chromebooks arm64: defconfig: Allow mt8173-based boards to boot from usb Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-01Merge tag 'imx-defconfig-5.13' of ↵Arnd Bergmann1-1/+12
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig i.MX defconfig change for 5.13: It includes a number of arm64 defconfig update for i.MX8 devices support. The following ones might deserve some notes. - Although Hantro decoder driver are sitting in staging, people already find it's quite useful on i.MX8M devices. - i.MX PCIe driver has no option for module build. - REALTEK_PHY becomes a built-in driver, because it's used on quite some i.MX8 reference boards where people want to boot via NFS. * tag 'imx-defconfig-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: configs: enable FlexTimer alarm timer arm64: configs: Select REALTEK_PHY as built-in arm64: configs: Enable PCIe support for imx8mq boards arm64: defconfig: Enable the Hantro decoder arm64: defconfig: add imx8qm pinctrl support arm64: defconfig: Enable wm8960 audio driver. arm64: defconfig: Enable asoc simple mux arm64: defconfig: Enable devfreq support for i.MX8MQ Link: https://lore.kernel.org/r/20210331041019.31345-6-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-03-31arm64: defconfig: Enable options to support panel display for Mediatek ↵Enric Balletbo i Serra1-0/+8
Chromebooks There are some Mediatek based Chromebooks supported in the kernel. Enable the required config options to have the panel display working on both devices. This was tested on the ACER Chromebook R13 (MT8173) and the Lenovo Ideapad Duet (MT8183), but should also enable display support for similar devices. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org> Link: https://lore.kernel.org/r/20210331090659.4169966-2-enric.balletbo@collabora.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-03-31arm64: defconfig: Allow mt8173-based boards to boot from usbEnric Balletbo i Serra1-0/+7
Enable the option necessary to boot mt8173-based boards to boot from usb devices, like its phy and the regulators needed to have proper support. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org> Link: https://lore.kernel.org/r/20210331090659.4169966-1-enric.balletbo@collabora.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-30 16:53:12 +0000