summaryrefslogtreecommitdiffstats
path: root/arch/arm64/configs
AgeCommit message (Collapse)AuthorFilesLines
2016-12-15Merge tag 'armsoc-arm64' of ↵Linus Torvalds1-2/+53
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC 64-bit updates from Arnd Bergmann: "Changes to platform code for 64-bit ARM platforms. We are not adding any new platforms that require code or Kconfig changes this time, so it's basically just defconfig changes to enable support for more drivers used on the existing platforms. This is mainly interesting for the Raspberry Pi 3, which should now work much better with the default build" * tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: defconfig: drop GPIO_SYSFS on multiplatforms arm64: defconfig: Do not lower CONFIG_LOG_BUF_SHIFT arm64: defconfig: allow rk3399-based boards to boot from mmc and usb arm64: defconfig: enable RK808 components arm64: defconfig: enable I2C and DW MMC controller on rockchip platform arm64: defconfig: Enable Tegra186 SoC ARM64: configs: Activate Internal PHY for Meson GXL arm64: qcom: enable GPIOLIB in Kconfig arm64: configs: enable configs for msm899(2/4) basic support ARM64: bcm2835: add thermal driver to default config ARM64: configs: Add Platform MHU in defconfig MAINTAINERS: Update Broadcom Vulcan maintainer email arm64: defconfig: enable EEPROM_AT25 config option arm64: Enable HIBERNATION in defconfig arm64: defconfig: Enable DRM DU and V4L2 FCP + VSP modules ARM64: defconfig: Enable MMC related configs arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig
2016-12-13Merge tag 'arm64-upstream' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - struct thread_info moved off-stack (also touching include/linux/thread_info.h and include/linux/restart_block.h) - cpus_have_cap() reworked to avoid __builtin_constant_p() for static key use (also touching drivers/irqchip/irq-gic-v3.c) - uprobes support (currently only for native 64-bit tasks) - Emulation of kernel Privileged Access Never (PAN) using TTBR0_EL1 switching to a reserved page table - CPU capacity information passing via DT or sysfs (used by the scheduler) - support for systems without FP/SIMD (IOW, kernel avoids touching these registers; there is no soft-float ABI, nor kernel emulation for AArch64 FP/SIMD) - handling of hardware watchpoint with unaligned addresses, varied lengths and offsets from base - use of the page table contiguous hint for kernel mappings - hugetlb fixes for sizes involving the contiguous hint - remove unnecessary I-cache invalidation in flush_cache_range() - CNTHCTL_EL2 access fix for CPUs with VHE support (ARMv8.1) - boot-time checks for writable+executable kernel mappings - simplify asm/opcodes.h and avoid including the 32-bit ARM counterpart and make the arm64 kernel headers self-consistent (Xen headers patch merged separately) - Workaround for broken .inst support in certain binutils versions * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (60 commits) arm64: Disable PAN on uaccess_enable() arm64: Work around broken .inst when defective gas is detected arm64: Add detection code for broken .inst support in binutils arm64: Remove reference to asm/opcodes.h arm64: Get rid of asm/opcodes.h arm64: smp: Prevent raw_smp_processor_id() recursion arm64: head.S: Fix CNTHCTL_EL2 access on VHE system arm64: Remove I-cache invalidation from flush_cache_range() arm64: Enable HIBERNATION in defconfig arm64: Enable CONFIG_ARM64_SW_TTBR0_PAN arm64: xen: Enable user access before a privcmd hvc call arm64: Handle faults caused by inadvertent user access with PAN enabled arm64: Disable TTBR0_EL1 during normal kernel execution arm64: Introduce uaccess_{disable,enable} functionality based on TTBR0_EL1 arm64: Factor out TTBR0_EL1 post-update workaround into a specific asm macro arm64: Factor out PAN enabling/disabling into separate uaccess_* macros arm64: Update the synchronous external abort fault description selftests: arm64: add test for unaligned/inexact watchpoint handling arm64: Allow hw watchpoint of length 3,5,6 and 7 arm64: hw_breakpoint: Handle inexact watchpoint addresses ...
2016-11-30Merge tag 'v4.10-rockchip-defconfig64' of ↵Arnd Bergmann1-0/+11
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/arm64 Pull "Rockchip defconfig64 changes for 4.10" from Heiko Stübner: 64bit defconfig changes to allow arm64 Rockchip socs to basically boot. * tag 'v4.10-rockchip-defconfig64' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: defconfig: allow rk3399-based boards to boot from mmc and usb arm64: defconfig: enable RK808 components arm64: defconfig: enable I2C and DW MMC controller on rockchip platform
2016-11-30arm64: defconfig: drop GPIO_SYSFS on multiplatformsLinus Walleij1-1/+0
The sysfs ABI to GPIO is marked obsolete and should not be encouraged. Users should be encouraged to switch to using the character device. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-11-30Merge tag 'arm-soc/for-4.10/defconfig-arm64' of ↵Arnd Bergmann1-0/+18
http://github.com/Broadcom/stblinux into next/arm64 Pull "Broadcom defconfig-arm64 changes for 4.10" from Florian Fainelli: This pull request contains Broadcom ARM64-based SoCs defconfig changes for 4.10, please pull the following changes: - Eric updates the ARMv8 defconfig to contain everything that is needed to run a 64-bit kernel on the Raspberry Pi 3 - Scott enables the standard AT25 EEPROM driver as module for the ARM64 defconfig - Martin enables the Raspberry Pi Thermal driver in the ARM64 defconfig * tag 'arm-soc/for-4.10/defconfig-arm64' of http://github.com/Broadcom/stblinux: ARM64: bcm2835: add thermal driver to default config arm64: defconfig: enable EEPROM_AT25 config option arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig
2016-11-30arm64: defconfig: Do not lower CONFIG_LOG_BUF_SHIFTGeert Uytterhoeven1-1/+0
The default value of 17 for CONFIG_LOG_BUF_SHIFT is much more suitable than 14. The latter easily leads to lost kernel messages on systems with only one CPU core. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2016-11-23arm64: Enable HIBERNATION in defconfigCatalin Marinas1-0/+1
This patch adds CONFIG_HIBERNATION to the arm64 defconfig. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-11-21Merge tag 'bcm2835-defconfig-64-next-2016-11-18' into defconfig-arm64/nextFlorian Fainelli1-0/+1
This pull enables the BCM2837 (Pi 3) thermal driver in the defconfig. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-11-18Merge tag 'tegra-for-4.10-arm64-defconfig' of ↵Olof Johansson1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/arm64 arm64: tegra: Default configuration updates for v4.10-rc1 Enable Tegra186 support. * tag 'tegra-for-4.10-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: defconfig: Enable Tegra186 SoC Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-18Merge tag 'amlogic-defconfig' of ↵Olof Johansson1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/arm64 Amlogic defconfig updates for v4.10 - enable I2C driver - enable SPI, watchdog and HW random as modules * tag 'amlogic-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM64: configs: Activate Internal PHY for Meson GXL ARM64: configs: Add Platform MHU in defconfig ARM64: defconfig: Enable MMC related configs Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-17Merge tag 'qcom-arm64-defconfig-for-4.10' of ↵Olof Johansson1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/arm64 Qualcomm ARM64 Based defconfig Updates for v4.10 * Enable defconfig options for MSM8992/8994 * tag 'qcom-arm64-defconfig-for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: arm64: configs: enable configs for msm899(2/4) basic support Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-17arm64: defconfig: allow rk3399-based boards to boot from mmc and usbHeiko Stuebner1-0/+5
Enable additional options necessary to boot rk3399-based boards to boot from either emmc or usb devices, like the arasan sdhci and its phy as well as the usb2 phy and general rockchip power-domain support. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-11-17arm64: defconfig: enable RK808 componentsAndy Yan1-0/+4
Many rockchip based arm64 boards use RK808 as PMIC, so enabe it here let the board bootup normally. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> [added rk808-rtc as module and rk808-clk output built in] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-11-17arm64: defconfig: enable I2C and DW MMC controller on rockchip platformAndy Yan1-0/+2
I2C and MMC are very basic modules for a board to bootup, as I2C always used to configure PMIC and MMC devices often used to store filesytem. So enable them here to let the rockchip based arm64 boards can bootup. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-11-15arm64: defconfig: Enable Tegra186 SoCJoseph Lo1-0/+1
Enable Tegra186 SoC. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-11-14ARM64: configs: Activate Internal PHY for Meson GXLNeil Armstrong1-0/+3
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-11-12arm64: configs: enable configs for msm899(2/4) basic supportJeremy McNicoll1-0/+2
Given the mimimal hardware support for msm899(2/4) currently. A few config options are needed to allow for continued development and booting. The following are needed for continued development and booting: -8994 pinctrl for serial support -Enable Global Glock Controller (gcc) Signed-off-by: Jeremy McNicoll <jeremymc@redhat.com> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-11-11ARM64: bcm2835: add thermal driver to default configMartin Sperl1-0/+1
Add the thermal driver for bcm2837 to list of compiled modules in the default config. Changelog: V7 -> V8: rebased Signed-off-by: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2016-11-07Merge tag 'renesas-arm64-defconfig-for-v4.10' of ↵Olof Johansson1-0/+14
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/arm64 Renesas ARM64 Based SoC Defconfig Updates for v4.10 * Enable R-Car DU and related drivers as modules in defconfig * tag 'renesas-arm64-defconfig-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: defconfig: Enable DRM DU and V4L2 FCP + VSP modules Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-07ARM64: configs: Add Platform MHU in defconfigNeil Armstrong1-0/+1
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-11-03arm64: defconfig: enable EEPROM_AT25 config optionScott Branden1-0/+1
Enable support for on board SPI EEPROM by setting CONFIG_EEPROM_AT25=m Signed-off-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-10-27arm64: Enable HIBERNATION in defconfigCatalin Marinas1-0/+1
This patch adds CONFIG_HIBERNATION to the arm64 defconfig. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-10-27arm64: defconfig: Enable DRM DU and V4L2 FCP + VSP modulesMagnus Damm1-0/+14
Extend the ARM64 defconfig to enable the DU DRM device as module together with required dependencies of V4L2 FCP and VSP modules. This enables VGA output on the r8a7795 Salvator-X board. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-10-20ARM64: defconfig: Enable MMC related configsNeil Armstrong1-0/+3
Enable MMC related defaults configs for MMC, PWM and PWM clock. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-10-19arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfigEric Anholt1-0/+16
Most of the drivers are included as modules, except for serial (needed for early console), WDT (required for reboot), and the dependency chain of RASPBERRYPI_POWER (which is currently not buildable as a module, but should be changed). Signed-off-by: Eric Anholt <eric@anholt.net>
2016-10-12arm64: xgene: defconfig: Enable Standby GPIOIyappan Subramanian1-0/+1
Enable CONFIG_GPIO_XGENE_SB. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Quan Nguyen <qnguyen@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19Merge tag 'zte-defconfig64-4.9' of ↵Arnd Bergmann1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/arm64 Pull "ZTE arm64 defconfig updates for 4.9" from Shawn Guo: - Enable ZTE ZX family support in arm64 defconfig * tag 'zte-defconfig64-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: defconfig: enable ZTE ZX related config
2016-09-16arm64: defconfig: enable ZTE ZX related configJun Nie1-0/+1
This patch enables the configuration for the ZTE ZX family. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-15Merge tag 'renesas-arm64-defconfig-for-v4.9' of ↵Arnd Bergmann1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/arm64 Pull "Renesas ARM64 Based SoC Defconfig Updates for v4.9" from Simon Horman: * Enable HSUSB and SDHI * tag 'renesas-arm64-defconfig-for-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: defconfig: Enable SDHI and GPIO_REGULATOR arm64: defconfig: Add Renesas R-Car HSUSB driver support as module
2016-09-15arm64: defconfig: enable common modules for power managementLeo Yan1-0/+3
Enable common modules for power management; one is to enable CPUFREQ_DT driver; the driver is used by many platforms by passing OPP table from device tree. Also enables thermal related drivers. Firstly we need enable configuration CPU_THERMAL for CPU cooling device driver, this will bind thermal zone with CPU cooling device; and enable 'power allocator' thermal governor. Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-09-15Merge tag 'mvebu-defconfig64-4.9-1' of git://git.infradead.org/linux-mvebu ↵Arnd Bergmann1-0/+2
into next/arm64 Pull "mvebu defconfig64 for 4.9 (part 1)" from Gregory CLEMENT: - add PCIe driver for Aardvark for Armada 3700 - enable xhci-platform for A7K/A8K * tag 'mvebu-defconfig64-4.9-1' of git://git.infradead.org/linux-mvebu: arm64: configs: enable PCIe driver for Aardvark arm64: defconfig: enable xhci-platform
2016-09-15Merge tag 'qcom-arm64-defconfig-for-4.9' of ↵Arnd Bergmann1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/arm64 Pull "Qualcomm ARM64 Based defconfig Updates for v4.9" from Andy Gross: * Enable defconfig options for QDF2432 * tag 'qcom-arm64-defconfig-for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: arm64: defconfig: Enable QDF2432 config options
2016-09-15arm64: defconfig: enable meson I2CKevin Hilman1-0/+1
Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-09-15arm64: defconfig: enable meson SPI as moduleKevin Hilman1-0/+1
Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-09-15arm64: defconfig: enable meson WDT as modulesKevin Hilman1-0/+2
Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-09-15arm64: defconfig: enable HW random as moduleKevin Hilman1-1/+0
drivers/char/hw_random/Kconfig has 'default m', so simply removing this entry from the defconfig will enable building HW random drivers as modules. Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-09-15Merge tag 'hisi-defconfig-for-4.9' of git://github.com/hisilicon/linux-hisi ↵Arnd Bergmann1-1/+15
into next/arm64 Pull "ARM64: hisilicon: defconfig updates for 4.9" from Wei Xu: - Enable hisilicon SAS and XGE for hip05 and hip06 - Enable drm, powerkey, bluetooth and adv7511/adv7533 for hikey - Add PINCTRL to HISI platform * tag 'hisi-defconfig-for-4.9' of git://github.com/hisilicon/linux-hisi: Kconfig: ARCH_HISI: Add PINCTRL to HISI platform arm64: defconfig: enable bluetooth supports as modules arm64: defconfig: enable CONFIG_INPUT_HISI_POWERKEY for HiKey arm64: defconfig: Enable HiSilicon kirin drm, adv7533 for HiKey arm64: defconfig: Enable Hisi SAS and HNS
2016-09-01arm64: defconfig: Enable SDHI and GPIO_REGULATORSimon Horman1-0/+2
This allows use of the SDHI SD/SDIO controller present on R-Car Gen3 SoCs and already enabled in the DT of the r8a7795/salvator-x (H3). Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-08-26arm64: configs: enable PCIe driver for AardvarkGregory CLEMENT1-0/+1
This patch enables the driver for the PCIe host controller found on the Marvell Armada 3700 ARM64 SoCs. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-08-24arm64: defconfig: enable bluetooth supports as modulesGuodong Xu1-0/+8
Enable the following items for bluetooth mouse and speaker which base on HCIUART. a) CONFIG_BT_HCIUART b) CONFIG_BT_HCIUART_LL c) CONFIG_BT_HIDP Enable bluetooth LED support. d) CONFIG_BT_LEDS Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-08-24arm64: defconfig: enable CONFIG_INPUT_HISI_POWERKEY for HiKeyGuodong Xu1-0/+1
Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-08-24arm64: defconfig: Enable HiSilicon kirin drm, adv7533 for HiKeyGuodong Xu1-0/+2
Enable HiSilicon kirin drm driver for HiKey: CONFIG_DRM_HISI_KIRIN Enable adv7511/adv7533 for HiKey: CONFIG_DRM_I2C_ADV7511 Build these components as modules. Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org> Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-08-24arm64: defconfig: Enable Hisi SAS and HNSKefeng Wang1-1/+4
Enable Hisi SAS and HNS config for D02/D03 board. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-08-23arm64: defconfig: Enable QDF2432 config optionsChristopher Covington1-0/+4
Now that ACPI is on in the defconfig, the time seems right to enable drivers for the SD/MMC, DMA, and pin control hardware described in the ACPI tables of the QDF2432 server platform. Signed-off-by: Christopher Covington <cov@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-08-12arm64: defconfig: enable CONFIG_LOCALVERSION_AUTOMasahiro Yamada1-1/+0
When CONFIG_LOCALVERSION_AUTO is disabled, the version string is just a tag name (or with a '+' appended if HEAD is not a tagged commit). During the development (and especially when git-bisecting), longer version string would be helpful to identify the commit we are running. This is a default y option, so drop the unset to enable it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-08-12arm64: defconfig: add options for virtualization and containersRiku Voipio1-6/+46
Enable options commonly needed by popular virtualization and container applications. Use modules when possible to avoid too much overhead for users not interested. - add namespace and cgroup options needed - add seccomp - optional, but enhances Qemu etc - bridge, nat, veth, macvtap and multicast for routing guests and containers - btfrs and overlayfs modules for container COW backends - while near it, make fuse a module instead of built-in. Generated with make saveconfig and dropping unrelated spurious change hunks while commiting. bloat-o-meter old-vmlinux vmlinux: add/remove: 905/390 grow/shrink: 767/229 up/down: 183513/-94861 (88652) .... Total: Before=10515408, After=10604060, chg +0.84% Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-08-11arm64: defconfig: Add Renesas R-Car HSUSB driver support as moduleYoshihiro Shimoda1-0/+2
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-08-08arm64: defconfig: enable xhci-platformThomas Petazzoni1-0/+1
Some ARM64 platforms (for example the Marvell Armada 7K/8K) use the generic XHCI platform driver, so it makes sense to enable CONFIG_USB_XHCI_PLATFORM=y in the defconfig to support XHCI on such platforms. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-08-01Merge tag 'armsoc-arm64' of ↵Linus Torvalds1-1/+48
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull 64-bit ARM SoC updates from Olof Johansson: "Changes to platform code for 64-bit ARM platforms. Nearly all of these are defconfig updates to enable new drivers or old drivers still used on these 64-bit platforms. Added platforms for this release are: - Broadcom BCM2837 - Renesas R8A7796" * tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits) arm64: remove duplicate PWM entry in defconfig arm64: Update default configuration arm64: defconfig: Enable more IP blocks for Exynos7 and Exynos5433 arm64: amlogic: select gxbb clk driver arm64: defconfig: Enable S2MPS11 clock and S3C RTC driver arm64: marvell: enable Armada 3700 clock drivers arm64: defconfig: enable msm8996 pinctrl support arm64: defconfig: Enable qcom msm8996 clk drivers arm: defconfig: Enable PM8941 pwr key arm64: defconfig: enable stmmac and realtek PHY as modules arm64: Kconfig: select PM{,_GENERIC_DOMAINS} for ARCH_VEXPRESS arm64: defconfig: enable SENSORS_ARM_SCPI arm64: defconfig: enable Generic on-chip SRAM driver arm64: configs: enable PCIe driver for Armada 7K/8K arm64: Add platform selection for BCM2835. arm64: defconfig: disable plain NEON implementation of AES arm64: Allow for different DMA and CPU bus offsets arm64: defconfig: enable Renesas R8A7796 SoC arm64: defconfig: Enable Cadence MACB/GEM support ARM64: Kconfig: Select the Amlogic Meson pin controller driver ...
2016-07-15arm64: remove duplicate PWM entry in defconfigArnd Bergmann1-1/+0
We merged two patches that both enabled CONFIG_PWM, leading to a harmless warning: arch/arm64/configs/defconfig:352:warning: override: reassigning to symbol PWM This removes one of the two identical lines to avoid the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 02:27:08 +0000