summaryrefslogtreecommitdiffstats
path: root/arch/arm64/boot
AgeCommit message (Collapse)AuthorFilesLines
2021-11-03Merge tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds361-5380/+37780
Pull ARM SoC DT updates from Arnd Bergmann: "This is a rather large update for the ARM devicetree files, after a few quieter releases, with 775 total commits and 47 branches pulled into this one. There are 5 new SoC types plus some minor variations, and a total of 60 new machines, so I'm limiting the summary to the main noteworthy items: - Apple M1 gain support for PCI and pinctrl, getting a bit closer to a usable system out of the box. - Qualcomm gains support for Snapdragon 690 (aka SM6350) as well as SM7225, 11 new smartphones, and three additional Chromebooks, and improvements all over the place. - Samsung gains support for ExynosAutov9, an automotive version of their smartphone SoC, but otherwise no major changes. - Microchip adds the SAMA5D29 SoC in the SAMA5 family, and a number of improvements for the recently added SAMA7 family. The LAN966 SoC that was added in the platform code does not have dts files yet. Two board files are added for the older at91sam9g20 SoC - Aspeed supports two additional server boards using their AST2600 as BMC, and improves support for qemu models - Rockchip RK3566/RK3688 gets added, along with six new development boards using RK3328/RK3399/RK3566, and one Chromebook tablet. - Two NAS boxes are added using the ARMv4 based Gemini platform - One new board is added to the Intel Arria SoC FPGA family - Marvell adds one network switch based on Armada 381 and the new MOCHAbin 7040 development board - NXP adds support for the S32G2 automotive SoC, two imx6 based ebook readers, and three additional development boards, which is notably less than their usual additions, but they also gain improvements to their many existing boards - STmicroelectronics adds their stm32mp13 SoC family along with a reference board - Renesas adds new versions of their R-Car Gen3 SoCs and many updates for their older generations - Broadcom adds support for a number of Cisco Meraki wireless controllers, along with two new boards and other updates for BCM53xx/BCM47xx networking SoCs and the Raspberry Pi boards - Mediatek improves support for the MT81xx SoCs used in Chromebooks as well as the MT76xx networking SoCs - NVIDIA adds a number of cleanups and additional support for more hardware on the already supported machines - TI K3 adds support for three new boards along with cleanups - Toshiba adds one board for the Visconti family - Xilinx adds five new ZynqMP based machines - Amlogic support is added for the Radxa Zero and two Jethub home automation controllers, along with changes to other machines - Rob Herring continues his work on fixing dtc warnings all over the tree. - Minor updates for TI OMAP, Mstar, Allwinner/sunxi, Hisilicon, Ux500, Unisoc" * tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (720 commits) arm64: dts: apple: j274: Expose PCI node for the Ethernet MAC address arm64: dts: apple: t8103: Add root port interrupt routing arm64: dts: apple: t8103: Add PCIe DARTs arm64: apple: Add PCIe node arm64: apple: Add pinctrl nodes ARM: dts: arm: Update ICST clock nodes 'reg' and node names ARM: dts: arm: Update register-bit-led nodes 'reg' and node names arm64: dts: exynos: add chipid node for exynosautov9 SoC ARM: dts: qcom: fix typo in IPQ8064 thermal-sensor node Revert "arm64: dts: qcom: msm8916-asus-z00l: Add sensors" arm64: dts: qcom: ipq6018: Remove unused 'iface_clk' property from dma-controller node arm64: dts: qcom: ipq6018: Remove unused 'qcom,config-pipe-trust-reg' property arm64: dts: qcom: sm8350: Add CPU topology and idle-states arm64: dts: qcom: Drop unneeded extra device-specific includes arm64: dts: qcom: msm8916: Drop standalone smem node arm64: dts: qcom: Fix node name of rpm-msg-ram device nodes arm64: dts: qcom: msm8916-asus-z00l: Add sensors arm64: dts: qcom: msm8916-asus-z00l: Add SDCard arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen arm64: dts: qcom: sdm845-oneplus: remove devinfo-size from ramoops node ...
2021-10-27Merge tag 'asahi-soc-dt-5.16-v2' of https://github.com/AsahiLinux/linux into ↵Arnd Bergmann2-0/+230
arm/dt Apple SoC DT updates for 5.16. Adds pinctrl and PCIe nodes. * tag 'asahi-soc-dt-5.16-v2' of https://github.com/AsahiLinux/linux: arm64: dts: apple: j274: Expose PCI node for the Ethernet MAC address arm64: dts: apple: t8103: Add root port interrupt routing arm64: dts: apple: t8103: Add PCIe DARTs arm64: apple: Add PCIe node arm64: apple: Add pinctrl nodes Link: https://lore.kernel.org/r/6d41b29c-dafa-9b0e-d9ff-fe01eb6dce82@marcan.st Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-27arm64: dts: apple: j274: Expose PCI node for the Ethernet MAC addressMarc Zyngier1-0/+23
At the moment, all the Minis running Linux have the same MAC address (00:10:18:00:00:00), which is a bit annoying. Expose the PCI node corresponding to the Ethernet device, and declare a 'local-mac-address' property. The bootloader will update it (m1n1 already has the required feature). And if it doesn't, then the default value is already present in the DT. This relies on forcing the bus number for each port so that the endpoints connected to them are correctly numbered (and keeps dtc quiet). Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Hector Martin <marcan@marcan.st>
2021-10-27arm64: dts: apple: t8103: Add root port interrupt routingMarc Zyngier1-3/+30
Add the interrupt-map properties that are required for INTx signalling. Tested-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Hector Martin <marcan@marcan.st>
2021-10-27arm64: dts: apple: t8103: Add PCIe DARTsMarc Zyngier1-0/+30
PCIe on the Apple M1 (aka t8103) requires the use of IOMMUs (aka DARTs). Add the three instances that deal with the internal PCIe ports and route each port's traffic through its DART. Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Hector Martin <marcan@marcan.st>
2021-10-27arm64: apple: Add PCIe nodeMark Kettenis1-0/+63
Add node corresponding to the apcie,t8103 node in the Apple device tree for the Mac mini (M1, 2020). Power domain references and DART (IOMMU) references are left out at the moment and will be added once the appropriate bindings have been settled upon. Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210921183420.436-5-kettenis@openbsd.org Signed-off-by: Hector Martin <marcan@marcan.st>
2021-10-27arm64: apple: Add pinctrl nodesMark Kettenis1-0/+87
Add pinctrl nodes corresponding to the gpio,t8101 nodes in the Apple device tree for the Mac mini (M1, 2020). Clock references are left out at the moment and will be added once the appropriate bindings have been settled upon. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210520171310.772-3-mark.kettenis@xs4all.nl Signed-off-by: Hector Martin <marcan@marcan.st>
2021-10-26Merge tag 'qcom-arm64-for-5.16-2' of ↵Arnd Bergmann115-2256/+5729
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM64 DTS additional patches for v5.16 The RPM and RPMh sleep stats are introduced on a number of platforms, to aid the enablement of entering low power mode. The MSM8916 support receives some polishing touches, followed by introduction of the necessary pieces to use the DeviceTree on 32-bit variants of the MSM8916 platform, in particular to boot the secondary CPUs. Based on this support for the Samsung Galaxy S4 Mini Value Edition is introduced. The Asus Zenfone 2 Laser gained touchscreen, sensors and sdcard support. MSM8996 got support for the its crypto hardware and the Xiaomi Mi 5 gained a description of its LCD panel. The Trogdor device on SC7180 gained support for a second source eDP brigde, while SC7280 gains PCIe support and the newly introduced Herobrine device. Both MSM8916 and SDM845 has their standalong SMEM node dropped, in favour of the newly introduced support for specifying the compatible directly on the reserved-memory node. The SM7225 platform is introduced, as a derrivative of SM6350, initial support for the PM6350 PMIC and based on this the Fairphone 4 is introduced. The RB3 and RB5 devices gains msm-id and board-id, to allow the two DTBs to be baked into a single boot.img that can be booted on both devices. As the GDSC driver has been extended to properly describe the relationship between MMCX and MDSS_GDSC, the now deprecated mmcx regulator is removed from SM8250. SM8350 gained CPU topology, idle-states and fastrpc support. FastRPC was also added for SM8150 and the SA8155p ADP got a couple of remoteprocs enabled. Additionally a number of DT validation issues was corrected across the various platforms and devices. * tag 'qcom-arm64-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (77 commits) Revert "arm64: dts: qcom: msm8916-asus-z00l: Add sensors" arm64: dts: qcom: ipq6018: Remove unused 'iface_clk' property from dma-controller node arm64: dts: qcom: ipq6018: Remove unused 'qcom,config-pipe-trust-reg' property arm64: dts: qcom: sm8350: Add CPU topology and idle-states arm64: dts: qcom: Drop unneeded extra device-specific includes arm64: dts: qcom: msm8916: Drop standalone smem node arm64: dts: qcom: Fix node name of rpm-msg-ram device nodes arm64: dts: qcom: msm8916-asus-z00l: Add sensors arm64: dts: qcom: msm8916-asus-z00l: Add SDCard arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen arm64: dts: qcom: sdm845-oneplus: remove devinfo-size from ramoops node arm64: dts: qcom: sdm845: Fix Qualcomm crypto engine bus clock arm64: dts: qcom: msm8996: Add device tree entries to support crypto engine arm64: dts: qcom: msm8996: move clock-frequency from PN547 NFC to I2C bus arm64: dts: qcom: msm8916-asus-z00l: Add sensors arm64: dts: qcom: sdm630: Add disabled Venus support arm64: dts: qcom: pm660l: Remove board-specific WLED configuration arm64: dts: qcom: Move WLED num-strings from pmi8994 to sony-xperia-tone arm64: dts: qcom: pmi8994: Remove hardcoded linear WLED enabled-strings arm64: dts: qcom: pmi8994: Fix "eternal"->"external" typo in WLED node ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-26Merge tag 'samsung-dt64-5.16-2' of ↵Arnd Bergmann3-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM64 changes for v5.16, part two 1. Add chassis-type property. 2. Add ChipID node to ExynosAutov9 DTSI. * tag 'samsung-dt64-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: add chipid node for exynosautov9 SoC arm64: dts: exynos: add 'chassis-type' property Link: https://lore.kernel.org/r/20211026094709.75692-4-krzysztof.kozlowski@canonical.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-26ARM: dts: arm: Update register-bit-led nodes 'reg' and node namesRob Herring1-8/+19
Add a 'reg' entry for register-bit-led nodes on the Arm Ltd platforms. The 'reg' entry is the LED control register address. With this, the node name can be updated to use a generic node name, 'led', and a unit-address. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20211024232003.211484-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-26Merge tag 'qcom-arm64-fixes-for-5.15-2' of ↵Arnd Bergmann1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm ARM64 DTS one more fix for 5.15 This reverts a clock change in the Qualcomm RB5 devicetree which in some combinations of firmware and configuration causes the device to crash during boot. Data on an adjacent platform indicates that this is probably not be the root cause of the problem, but this resolves the regression seen on RB5 and will allow the SM8250 platform to boot v5.15. * tag 'qcom-arm64-fixes-for-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: Revert "arm64: dts: qcom: sm8250: remove bus clock from the mdss node for sm8250 target" Link: https://lore.kernel.org/r/20211025201213.1145348-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-26arm64: dts: exynos: add chipid node for exynosautov9 SoCChanho Park1-0/+5
It can be compatible with exynos850's chipid. The SoC has eight chipid registers that can be used for OTP. Cc: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Link: https://lore.kernel.org/r/20211021012017.158919-3-chanho61.park@samsung.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-10-25Revert "arm64: dts: qcom: sm8250: remove bus clock from the mdss node for ↵Amit Pundir1-1/+2
sm8250 target" This reverts commit 001ce9785c0674d913531345e86222c965fc8bf4. This upstream commit broke AOSP (post Android 12 merge) build on RB5. The device either silently crashes into USB crash mode after android boot animation or we see a blank blue screen with following dpu errors in dmesg: [ T444] hw recovery is not complete for ctl:3 [ T444] [drm:dpu_encoder_phys_vid_prepare_for_kickoff:539] [dpu error]enc31 intf1 ctl 3 reset failure: -22 [ T444] [drm:dpu_encoder_phys_vid_wait_for_commit_done:513] [dpu error]vblank timeout [ T444] [drm:dpu_kms_wait_for_commit_done:454] [dpu error]wait for commit done returned -110 [ C7] [drm:dpu_encoder_frame_done_timeout:2127] [dpu error]enc31 frame done timeout [ T444] [drm:dpu_encoder_phys_vid_wait_for_commit_done:513] [dpu error]vblank timeout [ T444] [drm:dpu_kms_wait_for_commit_done:454] [dpu error]wait for commit done returned -110 Fixes: 001ce9785c06 ("arm64: dts: qcom: sm8250: remove bus clock from the mdss node for sm8250 target") Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211014135410.4136412-1-dmitry.baryshkov@linaro.org
2021-10-24Revert "arm64: dts: qcom: msm8916-asus-z00l: Add sensors"Bjorn Andersson1-51/+0
I didn't notice that I already had applied this patch and while this builds fine one copy is enough. This reverts commit 22efef1ca05d2c96730060750d00205c49b8b39c. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-10-24arm64: dts: qcom: ipq6018: Remove unused 'iface_clk' property from ↵Bhupesh Sharma1-3/+2
dma-controller node 'iface_clk' clock is not used by the qcom, bam_dma driver, so remove the same from 'ipq6018' dts. This is a preparatory patch for subsequent patch in this series which converts the qcom_bam_dma device-tree binding into YAML format. Without this change, 'make dtbs_check' leads to the following error: $ arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dt.yaml: dma-controller@7984000: clock-names: ['iface_clk', 'bam_clk'] is too long Fix the same. Cc: Thara Gopinath <thara.gopinath@linaro.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211013105541.68045-4-bhupesh.sharma@linaro.org
2021-10-24arm64: dts: qcom: ipq6018: Remove unused 'qcom,config-pipe-trust-reg' propertyBhupesh Sharma1-1/+0
'qcom,config-pipe-trust-reg' property doesn't seem to be used by the qcom, bam_dma driver, so remove the same from 'ipq6018' dts. This is a preparatory patch for subsequent patch in this series which converts the qcom_bam_dma device-tree binding into YAML format. Without this change, 'make dtbs_check' leads to the following error: $ arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dt.yaml: dma-controller@704000: 'qcom,config-pipe-trust-reg' does not match any of the regexes: 'pinctrl-[0-9]+' Fix the same. Cc: Thara Gopinath <thara.gopinath@linaro.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211013105541.68045-3-bhupesh.sharma@linaro.org
2021-10-24arm64: dts: qcom: sm8350: Add CPU topology and idle-statesBjorn Andersson1-0/+141
Add CPU topology and define the idle states for the silver and gold cores as well as the cluster. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Link: https://lore.kernel.org/r/20210825221600.1498939-1-bjorn.andersson@linaro.org
2021-10-24arm64: dts: qcom: Drop unneeded extra device-specific includesStephan Gerhold8-1969/+1937
For some reason apq8016-sbc, apq8096-db820c, msm8916-mtp and msm8996-mtp were added as separate .dts and .dtsi files where the first only contains the model name and the latter contains most of the actual definitions. Perhaps this was done with the expectation that there would be other devices also making use of exactly the same. However, this has not been the case until now and it also seems unlikely in the future. Having the extra .dtsi only clutters the file list and provides little benefit. Move the contents of the .dtsi into the .dts file to make this consistent with most other devices that simply define everything in the .dts. There are no functional changes introduced by this patch: The compiled ".dtb"s are completely identical. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211018133656.32649-1-stephan@gerhold.net
2021-10-24arm64: dts: qcom: msm8916: Drop standalone smem nodeStephan Gerhold1-10/+5
SMEM can now be described directly in the reserved-memory. This is mainly meant for newer SoCs where there is only one SMEM region. However, even on older SoCs like MSM8916 there is clearly one main SMEM region (described by "memory-region") that holds the smem_header and one special extra region used only for data of the RPM ("qcom,rpm-msg-ram"). The definition in reserved-memory also looks cleaner for older SoCs, so make use of that in MSM8916 as well. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211018110009.30837-2-stephan@gerhold.net
2021-10-24arm64: dts: qcom: Fix node name of rpm-msg-ram device nodesStephan Gerhold7-7/+7
According to the new DT schema for qcom,rpm-msg-ram the node name should be sram@. memory@ is reserved for definition of physical RAM (usable by Linux). This fixes the following dtbs_check error on various device trees: memory@60000: 'device_type' is a required property From schema: dtschema/schemas/memory.yaml Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211018110009.30837-1-stephan@gerhold.net
2021-10-24arm64: dts: qcom: msm8916-asus-z00l: Add sensorsJ.R. Divya Antony1-0/+51
This device has MPU-6515 imu and Asahi Kasei AK09911 magnetometer, Add support for it. Signed-off-by: J.R. Divya Antony <d.antony.jr@gmail.com> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211012112735.2765-3-d.antony.jr@gmail.com
2021-10-24arm64: dts: qcom: msm8916-asus-z00l: Add SDCardJ.R. Divya Antony1-0/+33
Enable SDHCI (SD Card) Storage. Signed-off-by: J.R. Divya Antony <d.antony.jr@gmail.com> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211012112735.2765-2-d.antony.jr@gmail.com
2021-10-24arm64: dts: qcom: msm8916-asus-z00l: Add touchscreenJ.R. Divya Antony1-0/+41
Add support for touchscreen in this device. Signed-off-by: J.R. Divya Antony <d.antony.jr@gmail.com> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211012112735.2765-1-d.antony.jr@gmail.com
2021-10-24arm64: dts: qcom: sdm845-oneplus: remove devinfo-size from ramoops nodeDavid Heidelberg1-1/+0
This property doesn't exist in Linux kernel. Fixes: 288ef8a42612 ("arm64: dts: sdm845: add oneplus6/6t devices") Reviewed-by: Caleb Connolly <caleb@connolly.tech> Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211011200138.115688-1-david@ixit.cz
2021-10-24arm64: dts: qcom: sdm845: Fix Qualcomm crypto engine bus clockVladimir Zapolskiy1-1/+1
The change corrects the described bus clock of the QCE. Fixes: 3e482859f1ef ("dts: qcom: sdm845: Add dt entries to support crypto engine.") Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211011095534.1580406-1-vladimir.zapolskiy@linaro.org
2021-10-24arm64: dts: qcom: msm8996: Add device tree entries to support crypto engineVladimir Zapolskiy1-0/+22
The change adds description of Qualcomm crypto engine controller and BAM associated with it. The change is inspired by commit 3e482859f1ef ("dts: qcom: sdm845: Add dt entries to support crypto engine.") While performance of cryptographic algorithms executed on QCE is lower than e.g. ones tinkered for ARM NEON, the offloaded execution would make sense: # cryptsetup benchmark | grep aes aes-cbc 128b 71.0 MiB/s 71.9 MiB/s aes-cbc 256b 62.4 MiB/s 62.4 MiB/s aes-xts 256b 70.7 MiB/s 70.8 MiB/s aes-xts 512b 62.0 MiB/s 63.3 MiB/s Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Cc: Thara Gopinath <thara.gopinath@linaro.org> Acked-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211011094822.1580122-1-vladimir.zapolskiy@linaro.org
2021-10-24arm64: dts: qcom: msm8996: move clock-frequency from PN547 NFC to I2C busKrzysztof Kozlowski1-1/+1
Although the early NXP NCI NFC bindings required the clock-frequency property, it was never used by the driver and it is actually a property of I2C bus, not I2C slave. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211011073143.32645-1-krzysztof.kozlowski@canonical.com
2021-10-24arm64: dts: qcom: msm8916-asus-z00l: Add sensorsJ.R. Divya Antony1-0/+51
This device has MPU-6515 imu and Asahi Kasei AK09911 magnetometer. Add support for it. Signed-off-by: J.R. Divya Antony <d.antony.jr@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211010033750.15204-1-d.antony.jr@gmail.com
2021-10-24arm64: dts: qcom: sdm630: Add disabled Venus supportAngeloGioacchino Del Regno1-0/+51
Add support for the Venus video decoder/encoder but leave it disabled by default; it is expected to eventually get enabled in each machine specific DT, where required. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211008102119.268869-3-angelogioacchino.delregno@collabora.com
2021-10-24arm64: dts: qcom: pm660l: Remove board-specific WLED configurationMarijn Suijten1-7/+0
This string- and electrical configuration depend on the board and panel, and should hence not be defined generically for every user of pm660l. SoMainline will pick this configuration again when enabling WLED on the Sony Nile platform. Fixes: 7b56a804e58b ("arm64: dts: qcom: pm660l: Add WLED support") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211007213400.258371-14-marijn.suijten@somainline.org
2021-10-24arm64: dts: qcom: Move WLED num-strings from pmi8994 to sony-xperia-toneMarijn Suijten2-1/+1
The number of WLED strings used by a certain platform depend on the panel connected to that board and may not be the same for every user of pmi8994. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211007213400.258371-13-marijn.suijten@somainline.org
2021-10-24arm64: dts: qcom: pmi8994: Remove hardcoded linear WLED enabled-stringsMarijn Suijten1-2/+0
The driver now sets an appropriate default for WLED4 (and WLED5) just like WLED3 making this linear array from 0-3 redundant. In addition the driver is now able to parse arrays of variable length solving the "all four strings *have to* be defined" comment. Besides the driver will now warn when both properties are specified to prevent ambiguity: the length of the array is enough to imply a set number of strings. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211007213400.258371-12-marijn.suijten@somainline.org
2021-10-24arm64: dts: qcom: pmi8994: Fix "eternal"->"external" typo in WLED nodeMarijn Suijten1-1/+1
The property is named "qcom,external-pfet", as found by dt_binding_check: 'qcom,eternal-pfet' does not match any of the regexes Fixes: 37aa540cbd30 ("arm64: dts: qcom: pmi8994: Add WLED node") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211007213400.258371-11-marijn.suijten@somainline.org
2021-10-24arm64: dts: qcom: sc7280: Add HerobrineMatthias Kaehlcke3-0/+1427
Herobrine is a Chrome OS board/platform based on the QCA SC7280. Add a .dtsi for the platform parts and a .dts for the board specific bits. Currently the .dtsi has everything except the compatible strings, things will likely get shuffled around in the future as we learn more about the differences between boards. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211007140854.1.I70615769f27bbaf7e480419d0f660f802b1fea43@changeid
2021-10-24arm64: dts: qcom: sc7280: Add PCIe nodes for IDP boardPrasad Malisetty3-0/+66
Enable PCIe controller and PHY for sc7280 IDP board. Add specific NVMe GPIO entries for SKU1 and SKU2 support. Signed-off-by: Prasad Malisetty <pmaliset@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1633628923-25047-4-git-send-email-pmaliset@codeaurora.org
2021-10-24arm64: dts: qcom: sc7280: Add PCIe and PHY related nodesPrasad Malisetty1-0/+118
Add PCIe controller and PHY nodes for sc7280 SOC. Signed-off-by: Prasad Malisetty <pmaliset@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1633628923-25047-3-git-send-email-pmaliset@codeaurora.org
2021-10-24arm64: dts: qcom: msm8996: xiaomi-gemini: Enable JDI LCD panelRaffaele Tranquillini1-0/+33
This enables the JDI FHD_R63452 LCD panel used on Xiaomi Mi 5 Signed-off-by: Raffaele Tranquillini <raffaele.tranquillini@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210925113808.524749-1-raffaele.tranquillini@gmail.com
2021-10-24arm64: dts: qcom: Fix 'interrupt-map' parent address cellsRob Herring2-12/+12
The 'interrupt-map' in several QCom SoCs is malformed. The '#address-cells' size of the parent interrupt controller (the GIC) is not accounted for. Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: linux-arm-msm@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210928192210.1842377-1-robh@kernel.org
2021-10-24arm64: dts: qcom: ipq8074-hk01: Add dummy supply for QMP USB3 PHYShawn Guo1-0/+6
Per QMP PHY bindings schema, 'vdda-phy-supply' and 'vdda-phy-supply' are required for IPQ8074 QMP USB3 PHY. Since supplies are not added in DTS for this platform, add a dummy regulator as the supply to QMP USB3 PHY, so that dtbs_check stops complaining the missing supplies. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210929034253.24570-10-shawn.guo@linaro.org
2021-10-24arm64: dts: qcom: Fix IPQ8074 PCIe PHY nodesShawn Guo1-10/+36
IPQ8074 PCIe PHY nodes are broken in the many ways: - '#address-cells', '#size-cells' and 'ranges' are missing. - Child phy/lane node is missing, and the child properties like '#phy-cells' and 'clocks' are mistakenly put into parent node. - The clocks properties for parent node are missing. Fix them to get the nodes comply with the bindings schema. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210929034253.24570-9-shawn.guo@linaro.org
2021-10-24arm64: dts: qcom: msm8998-clamshell: Add missing vdda suppliesShawn Guo1-0/+2
'vdda-phy-supply' and 'vdda-pll-supply' are required properties. Add them to fix the dtbs_check warnings below. phy@1da7000: 'vdda-phy-supply' is a required property arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dt.yaml arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dt.yaml phy@1da7000: 'vdda-pll-supply' is a required property arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dt.yaml arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dt.yaml Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210929034253.24570-8-shawn.guo@linaro.org
2021-10-24arm64: dts: qcom: Drop reg-names from QMP PHY nodesShawn Guo3-3/+0
The 'reg-names' is not a supported/used property. Drop it from QMP PHY nodes to fix dtbs_check warnings like below. phy-wrapper@88e9000: 'reg-names' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/sm8350-hdk.dt.yaml arch/arm64/boot/dts/qcom/sm8350-mtp.dt.yaml Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210929034253.24570-7-shawn.guo@linaro.org
2021-10-24arm64: dts: qcom: Drop max-microamp and vddp-ref-clk properties from QMP PHYShawn Guo12-29/+0
The following properties are not supported and causing dtbs_check warnings. - vdda-phy-max-microamp - vdda-pll-max-microamp - vddp-ref-clk-max-microamp - vddp-ref-clk-always-on Drop them from QMP PHY nodes. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210929034253.24570-6-shawn.guo@linaro.org
2021-10-24arm64: dts: qcom: Correct QMP PHY child node nameShawn Guo8-25/+25
Many child nodes of QMP PHY are named without following bindings schema and causing dtbs_check warnings like below. phy@1c06000: 'lane@1c06800' does not match any of the regexes: '^phy@[0-9a-f]+$' arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dt.yaml arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dt.yaml arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dt.yaml arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dt.yaml Correct them to fix the warnings. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210929034253.24570-5-shawn.guo@linaro.org
2021-10-24arm64: dts: qcom: msm8996: Move '#clock-cells' to QMP PHY child nodeShawn Guo4-8/+5
'#clock-cells' is a required property of QMP PHY child node, not itself. Move it to fix the dtbs_check warnings. There are only '#clock-cells' removal from SM8350 QMP PHY nodes, because child nodes already have the property. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210929034253.24570-4-shawn.guo@linaro.org
2021-10-24arm64: dts: qcom: sc7280: Add 200MHz in qspi_opp_tableRajesh Patil1-0/+5
Add 200MHz OPP in qspi_opp_table Signed-off-by: Rajesh Patil <rajpat@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1632892123-11006-1-git-send-email-rajpat@codeaurora.org
2021-10-24arm64: dts: qcom: pmk8350: Make RTC disabled by default; enable on sc7280-idpDouglas Anderson3-0/+9
The RTC on the pmk8350 is not useful on all boards. Some boards may not provide backup power to the PMIC but might have another RTC on the board that does have backup power. In this case it's better to not use the RTC on the PMIC. At the moment, the only boards that includes this PMIC are sc7280-idp and sc7280-idp2. On sc7280-idp I'm not aware of any other RTCs, but sc7280-idp2 has a Chrome OS EC on it and this is intended to provide the RTC for the AP. Let's do what we normally do for hardware that's not used by all boards and set it to a default status of "disabled" and then enable it on the boards that need it. NOTE: for sc7280-idp it's _possible_ we might also want to add `allow-set-time;`. That could be the subject of a future patch if it is indeed true. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Satya Priya <skakit@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> [bjorn: Enable the RTC on the MTP as well] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210929153553.1.Ib44c2ac967833d7a3f51452d44d15b7b8d23c1f0@changeid
2021-10-24arm64: dts: qcom: ipq8074: Add QUP5 I2C nodeChukun Pan1-0/+15
Add node to support the QUP5 I2C controller inside of IPQ8074. It is exactly the same as QUP2 controllers. Some routers like ZTE MF269 use this bus. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211001145421.18302-1-amadeus@jmu.edu.cn
2021-10-23arm64: dts: qcom: qrb5165-rb5: Add msm-id and board-idAmit Pundir1-0/+2
Add qcom,msm-id and qcom,board-id for Robotics Board RB5. This will help us boot the device with newer Android boot image header versions, which package dtb separately instead of the default Image.gz-dtb (appended dtb) format. Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210930185742.117928-2-amit.pundir@linaro.org
2021-10-23arm64: dts: qcom: sdm845-db845c: Add msm-id and board-idAmit Pundir1-0/+2
Add qcom,msm-id and qcom,board-id for Dragonboard 845c. This will help us boot the device with newer Android boot image header versions, which package dtb separately instead of the default Image.gz-dtb (appended dtb) format. Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210930185742.117928-1-amit.pundir@linaro.org
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-01 08:21:13 +0000