Age | Commit message (Collapse) | Author | Files | Lines |
|
Pull ARM SoC device tree updates from Arnd Bergmann:
"This is a smaller update than the past few times, but with just over
500 non-merge changesets still dwarfes the rest of the SoC tree.
Three new SoC platforms get added, each one a follow-up to an existing
product, and added here in combination with a reference platform:
- Renesas RZ/A2M (R7S9210) 32-bit Cortex-A9 Real-time imaging
processor:
https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rza/rza2m.html
- Renesas RZ/G2E (r8a774c0) 64-bit Cortex-A53 SoC "for Rich Graphics
Applications":
https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rzg/rzg2e.html
- NXP i.MX8QuadXPlus 64-bit Cortex-A35 SoC:
https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/i.mx-applications-processors/i.mx-8-processors/i.mx-8x-family-arm-cortex-a35-3d-graphics-4k-video-dsp-error-correcting-code-on-ddr:i.MX8X
These are actual commercial products we now support with an in-kernel
device tree source file:
- Bosch Guardian is a product made by Bosch Power Tools GmbH, based
on the Texas Instruments AM335x chip
- Winterland IceBoard is a Texas Instruments AM3874 based machine
used in telescopes at the south pole and elsewhere, see commit
d031773169df2 for some pointers:
- Inspur on5263m5 is an x86 server platform with an Aspeed ast2500
baseboard management controller. This is for running on the BMC.
- Zodiac Digital Tapping Unit, apparently a kind of ethernet switch
used in airplanes.
- Phicomm K3 is a WiFi router based on Broadcom bcm47094
- Methode Electronics uDPU FTTdp distribution point unit
- X96 Max, a generic TV box based on Amlogic G12a (S905X2)
- NVIDIA Shield TV (Darcy) based on Tegra210
And then there are several new SBC, evaluation, development or modular
systems that we add:
- Three new Rockchips rk3399 based boards:
- FriendlyElec NanoPC-T4 and NanoPi M4
- Radxa ROCK Pi 4
- Five new i.MX6 family SoM modules and boards for industrial
products:
- Logic PD i.MX6QD SoM and evaluation baseboad
- Y Soft IOTA Draco/Hydra/Ursa family boards based on i.MX6DL
- Phytec phyCORE i.MX6 UltraLite SoM and evaluation module
- MYIR Tech MYD-LPC4357 development based on the NXP lpc4357
microcontroller
- Chameleon96, an Intel/Altera Cyclone5 based FPGA development system
in 96boards form factor
- Arm Fixed Virtual Platforms(FVP) Base RevC, a purely virtual
platform for corresponding to the latest "fast model"
- Another Raspberry Pi variant: Model 3 A+, supported both in 32-bit
and 64-bit mode.
- Oxalis Evalkit V100 based on NXP Layerscape LS1012a, in 96Boards
enterprise form factor
- Elgin RV1108 R1 development board based on 32-bit Rockchips RV1108
For already supported boards and SoCs, we often add support for new
devices after merging the drivers. This time, the largest changes
include updates for
- STMicroelectronics stm32mp1, which was now formally launched last
week
- Qualcomm Snapdragon 845, a high-end phone and low-end laptop chip
- Action Semi S700
- TI AM654x, their recently merged 64-bit SoC from the OMAP family
- Various Amlogic Meson SoCs
- Mediatek MT2712
- NVIDIA Tegra186 and Tegra210
- The ancient NXP lpc32xx family
- Samsung s5pv210, used in some older mobile phones
Many other chips see smaller updates and bugfixes beyond that"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (506 commits)
ARM: dts: exynos: Fix max voltage for buck8 regulator on Odroid XU3/XU4
dt-bindings: net: ti: deprecate cpsw-phy-sel bindings
ARM: dts: am335x: switch to use phy-gmii-sel
ARM: dts: am4372: switch to use phy-gmii-sel
ARM: dts: dm814x: switch to use phy-gmii-sel
ARM: dts: dra7: switch to use phy-gmii-sel
arch: arm: dts: kirkwood-rd88f6281: Remove disabled marvell,dsa reference
ARM: dts: exynos: Add support for secondary DAI to Odroid XU4
ARM: dts: exynos: Add support for secondary DAI to Odroid XU3
ARM: dts: exynos: Disable ARM PMU on Odroid XU3-lite
ARM: dts: exynos: Add stdout path property to Arndale board
ARM: dts: exynos: Add minimal clkout parameters to Exynos3250 PMU
ARM: dts: exynos: Enable ADC on Odroid HC1
arm64: dts: sprd: Remove wildcard compatible string
arm64: dts: sprd: Add SC27XX fuel gauge device
arm64: dts: sprd: Add SC2731 charger device
arm64: dts: sprd: Add ADC calibration support
arm64: dts: sprd: Remove PMIC INTC irq trigger type
arm64: dts: rockchip: Enable tsadc device on rock960
ARM: dts: rockchip: add chosen node on veyron devices
...
|
|
Pull networking updates from David Miller:
"Here we go, another merge window full of networking and #ebpf changes:
1) Snoop DHCPACKS in batman-adv to learn MAC/IP pairs in the DHCP
range without dealing with floods of ARP traffic, from Linus
Lüssing.
2) Throttle buffered multicast packet transmission in mt76, from
Felix Fietkau.
3) Support adaptive interrupt moderation in ice, from Brett Creeley.
4) A lot of struct_size conversions, from Gustavo A. R. Silva.
5) Add peek/push/pop commands to bpftool, as well as bash completion,
from Stanislav Fomichev.
6) Optimize sk_msg_clone(), from Vakul Garg.
7) Add SO_BINDTOIFINDEX, from David Herrmann.
8) Be more conservative with local resends due to local congestion,
from Yuchung Cheng.
9) Allow vetoing of unsupported VXLAN FDBs, from Petr Machata.
10) Add health buffer support to devlink, from Eran Ben Elisha.
11) Add TXQ scheduling API to mac80211, from Toke Høiland-Jørgensen.
12) Add statistics to basic packet scheduler filter, from Cong Wang.
13) Add GRE tunnel support for mlxsw Spectrum-2, from Nir Dotan.
14) Lots of new IP tunneling forwarding tests, also from Nir Dotan.
15) Add 3ad stats to bonding, from Nikolay Aleksandrov.
16) Lots of probing improvements for bpftool, from Quentin Monnet.
17) Various nfp drive #ebpf JIT improvements from Jakub Kicinski.
18) Allow #ebpf programs to access gso_segs from skb shared info, from
Eric Dumazet.
19) Add sock_diag support for AF_XDP sockets, from Björn Töpel.
20) Support 22260 iwlwifi devices, from Luca Coelho.
21) Use rbtree for ipv6 defragmentation, from Peter Oskolkov.
22) Add JMP32 instruction class support to #ebpf, from Jiong Wang.
23) Add spinlock support to #ebpf, from Alexei Starovoitov.
24) Support 256-bit keys and TLS 1.3 in ktls, from Dave Watson.
25) Add device infomation API to devlink, from Jakub Kicinski.
26) Add new timestamping socket options which are y2038 safe, from
Deepa Dinamani.
27) Add RX checksum offloading for various sh_eth chips, from Sergei
Shtylyov.
28) Flow offload infrastructure, from Pablo Neira Ayuso.
29) Numerous cleanups, improvements, and bug fixes to the PHY layer
and many drivers from Heiner Kallweit.
30) Lots of changes to try and make packet scheduler classifiers run
lockless as much as possible, from Vlad Buslov.
31) Support BCM957504 chip in bnxt_en driver, from Erik Burrows.
32) Add concurrency tests to tc-tests infrastructure, from Vlad
Buslov.
33) Add hwmon support to aquantia, from Heiner Kallweit.
34) Allow 64-bit values for SO_MAX_PACING_RATE, from Eric Dumazet.
And I would be remiss if I didn't thank the various major networking
subsystem maintainers for integrating much of this work before I even
saw it. Alexei Starovoitov, Daniel Borkmann, Pablo Neira Ayuso,
Johannes Berg, Kalle Valo, and many others. Thank you!"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2207 commits)
net/sched: avoid unused-label warning
net: ignore sysctl_devconf_inherit_init_net without SYSCTL
phy: mdio-mux: fix Kconfig dependencies
net: phy: use phy_modify_mmd_changed in genphy_c45_an_config_aneg
net: dsa: mv88e6xxx: add call to mv88e6xxx_ports_cmode_init to probe for new DSA framework
selftest/net: Remove duplicate header
sky2: Disable MSI on Dell Inspiron 1545 and Gateway P-79
net/mlx5e: Update tx reporter status in case channels were successfully opened
devlink: Add support for direct reporter health state update
devlink: Update reporter state to error even if recover aborted
sctp: call iov_iter_revert() after sending ABORT
team: Free BPF filter when unregistering netdev
ip6mr: Do not call __IP6_INC_STATS() from preemptible context
isdn: mISDN: Fix potential NULL pointer dereference of kzalloc
net: dsa: mv88e6xxx: support in-band signalling on SGMII ports with external PHYs
cxgb4/chtls: Prefix adapter flags with CXGB4
net-sysfs: Switch to bitmap_zalloc()
mellanox: Switch to bitmap_zalloc()
bpf: add test cases for non-pointer sanitiation logic
mlxsw: i2c: Extend initialization by querying resources data
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Johan Hedberg says:
====================
pull request: bluetooth-next 2019-03-02
Here's one more bluetooth-next pull request for the 5.1 kernel:
- Added support for MediaTek MT7663U and MT7668U UART devices
- Cleanups & fixes to the hci_qca driver
- Fixed wakeup pin behavior for QCA6174A controller
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
RDB board
The LS1028A RDB board features an Atheros PHY connected over
SGMII to the ENETC PF0 (or Port0). ENETC Port1 (PF1) has no
external connection on this board, so it can be disabled for now.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The LS1028A SoC features a PCI Integrated Endpoint Root Complex
(IERC) defining several integrated PCI devices, including the ENETC
ethernet controller integrated endpoints (IEPs). The IERC implements
ECAM (Enhanced Configuration Access Mechanism) to provide access
to the PCIe config space of the IEPs. This means the the IEPs
(including ENETC) do not support the standard PCIe BARs, instead
the Enhanced Allocation (EA) capability structures in the ECAM space
are used to fix the base addresses in the system, and the PCI
subsystem uses these structures for device enumeration and discovery.
The "ranges" entries contain basic information from these EA capabily
structures required by the kernel for device enumeration.
The current patch also enables the first 2 ENETC PFs (Physiscal
Functions) and the associated VFs (Virtual Functions), 2 VFs for
each PF. Each of these ENETC PFs has an external ethernet port
on the LS1028A SoC.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/fixes
Qualcomm ARM64 Fixes for 5.0-rc8
* Fix TZ memory area size to avoid crashes during boot
* tag 'qcom-fixes-for-5.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
arm64: dts: qcom: msm8998: Extend TZ reserved memory area
|
|
Currently, we don't coordinate BT USB activity with our handling of the
BT out-of-band wake pin, and instead just use gpio-keys. That causes
problems because we have no way of distinguishing wake activity due to a
BT device (e.g., mouse) vs. the BT controller (e.g., re-configuring wake
mask before suspend). This can cause spurious wake events just because
we, for instance, try to reconfigure the host controller's event mask
before suspending.
We can avoid these synchronization problems by handling the BT wake pin
directly in the btusb driver -- for all activity up until BT controller
suspend(), we simply listen to normal USB activity (e.g., to know the
difference between device and host activity); once we're really ready to
suspend the host controller, there should be no more host activity, and
only *then* do we unmask the GPIO interrupt.
This is already supported by btusb; we just need to describe the wake
pin in the right node.
We list 2 compatible properties, since both PID/VID pairs show up on
Scarlet devices, and they're both essentially identical QCA6174A-based
modules.
Also note that the polarity was wrong before: Qualcomm implemented WAKE
as active high, not active low. We only got away with this because
gpio-keys always reconfigured us as bi-directional edge-triggered.
Finally, we have an external pull-up and a level-shifter on this line
(we didn't notice Qualcomm's polarity in the initial design), so we
can't do pull-down. Switch to pull-none.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
My console locks up as soon as Linux writes to [88800000,88f00000[
AFAIU, that memory area is reserved for trustzone.
Extend TZ reserved memory range, to prevent Linux from stepping on
trustzone's toes.
Cc: stable@vger.kernel.org # 4.20+
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Fixes: c7833949564ec ("arm64: dts: qcom: msm8998: Add smem related nodes")
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
arm/fixes
mvebu fixes for 5.0 (part 2)
Fix PHY reset signal on clearfog gt 8K (Armada 8040 based)
Fix NAND description on Armada XP boards which was broken since a few
release
* tag 'mvebu-fixes-5.0-2' of git://git.infradead.org/linux-mvebu:
arm64: dts: clearfog-gt-8k: fix SGMII PHY reset signal
ARM: dts: armada-xp: fix Armada XP boards NAND description
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions into arm/dt
Actions ARM64 DT changes for v5.1:
- Add interrupt properties to S900 pinctrl node
- Add Reset controller support for S700
- Add Reset controller support for S900
- Add pinctrl support for S700
- Add I2C support for S700
- Enable I2C0 and I2C1 for s700-cubieboard7
* tag 'actions-arm64-dt-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions:
arm64: dts: actions: s700-cubieboard7: Enable I2C0 and I2C1
arm64: dts: actions: s700: Add I2C controller nodes
arm64: dts: actions: Add pinctrl node for Actions Semi S700
arm64: dts: actions: Add Reset Controller support for S900 SoC
arm64: dts: actions: Add Reset Controller support for S700 SoC
arm64: dts: actions: Add interrupt properties to pinctrl node for S900
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The PHY reset signal goes to mpp43 on CP0.
Fixes: babc5544c293 ("arm64: dts: clearfog-gt-8k: 1G eth PHY reset signal")
Reported-by: Denis Odintsov <oversun@me.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Remove wildcard compatible string.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add Spreadtrum SC27XX fuel gauge device node to calculate the
battery capacity.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add charger device node and related battery node for SC2731 PMIC.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This patch adds phandles to the calibration cells provided by the Efuse
device, which is used to calibrate the ADC channel scales.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The Spreadtrum PMIC INTC controller has no registers to set trigger type,
since it is always high level trigger as default. So remove its child
devices' irq trigger type setting and change #interrupt-cells to 1.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
rockpro64 regulator improvements, rock960 improvements (tsadc, wifi, hdmi
audio), nanopi4 bluetooth support and rk3328-roc-cc gmac improvement.
* tag 'v5.1-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Enable tsadc device on rock960
arm64: dts: rockchip: Add on-board WiFi/BT support for Rock960 boards
arm64: dts: rockchip: fix rk3328-roc-cc gmac2io stability issues
arm64: dts: rockchip: rockpro64 dts add usb regulator
arm64: dts: rockchip: rockpro64 dts remove unused lcd-reset pinmux
arm64: dts: rockchip: rockpro64 dts make regulator more readable
arm64: dts: rockchip: Add nanopi4 bluetooth
arm64: dts: rockchip: enable mali power supply on rk3399-rockpro64
arm64: dts: rockchip: Enable HDMI audio devices on rk3399-rock960
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Enable the thermal sensor. This device also provides
temperature shutdown protection. The shutdown value is
set at 110C, as tested by the vendor.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add pinctrl definitions for Actions Semiconductor S700 I2C controllers.
Pinctrl definitions are only available for I2C0, I2C1 and I2C2.
Enable I2C0 (PMIC), I2C1 (gyro, touchscreen) in cubieboard7.
Signed-off-by: Parthiban Nallathambi <pn@denx.de>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Add I2C controller nodes for Actions Semiconductor S700 SoC.
Signed-off-by: Parthiban Nallathambi <pn@denx.de>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Add pinctrl nodes for Actions Semi S700 SoC
Signed-off-by: Parthiban Nallathambi <pn@denx.de>
Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Add reset controller property and bindings header for the
Actions Semi S900 SoC DTS.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Add reset controller property and bindings header for the
Actions Semi S700 SoC DTS.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Add interrupt properties to pinctrl node for Actions Semi S900 SoC.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/dt
Qualcomm ARM64 Updates for v5.1
* Add thermal trip points to cpufreq
* Add SDM845 IOMMU info for SDHC, USB, and WLAN
* Fix MSM8916 clock cell argument
* tag 'qcom-arm64-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
arm64: dts: sdm845: Fixup dependency on RPMPD includes
arm64: dts: sdm845: Add clocks and iommus to WCN3990 WLAN node
arm64: dts: qcom: sdm845: Define iommus for USB controllers
arm64: dts: qcom: sdm845: Define IOMMU for sdhc 2
arm64: dts: sdm845: wireup the thermal trip points to cpufreq
arm64: dts: msm8916: remove bogus argument to the cpu clock
[arnd: I've pulled the earlier branch again after an update, this
adds the stuff listed above, and fixes a build error from the missing
dependency, as I requested]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into HEAD
AM654x SoC updates for v5.1 (part 2)
Contains a few DT updates on top of part 1 of the pull:
- MSMC RAM support (on-chip SRAM)
- Main system control module support
- USB support
- ADC support
There is an extra dt-binding update included, which has been acked
by Rob.
* tag 'am654-for-v5.1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux:
arm64: dts: ti: k3-am65-mcu: Add ADC nodes
dt-bindings: input: ti-tsc-adc: Add new compatible for AM654 SoCs
arm64: dts: ti: k3-am654-base-board: enable USB1
arm64: dts: ti: k3-am6: add USB support
arm64: dts: ti: am654: Add Main System Control Module node
arm64: dts: ti: k3-am65: Add MSMC RAM node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This patch fixes a dependency issue with the RPMPD dt bindings. This
temporarily removes the include file and adds hardcoded values for the
OPPs until the other changes full land. This will be addressed in 5.2.
Fixes: 5b6f186f0abb ("arm64: dts: sdm845: Add rpmh powercontroller node")
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into arm/dt
UniPhier ARM64 SoC DT updates for v5.1
- Add PCI Express controller nodes
* tag 'uniphier-dt64-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
arm64: dts: uniphier: sort labels in the same order as in dtsi
arm64: dts: uniphier: Add PCIe host controller and PHY nodes
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
arm/dt
arm64: dts: zynqmp: DT changes for v5.1
- Extend timeout for wifi to power up on Ultra96
* tag 'zynqmp-dt-for-v5.1' of https://github.com/Xilinx/linux-xlnx:
arm64: dts: zcu100-revC: Give wifi some time after power-on
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm64 device tree changes for 5.1:
- Add initial i.MX8QXP SoC and MEK board support.
- Various device additions to i.MX8MQ SoC and EVK board support:
RTC, QuadSPI, PMU, ECSPI, PWM, GPC power domain, USB etc.
- Use generic node name for m25p80 flash on layerscape devices.
- Add num-viewport property for layerscape PCIe devices, and
incr-burst-type-adjustment for USB3 devices.
- Add LS1012AX based Oxalis board support.
- Add fsl-mc, FlexSPI device and dma-ranges property for LX2160A SoC.
- Add SMMU device and missing dma-coherent property in fsl-mc for
LS1088 SoC.
* tag 'imx-dt64-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (30 commits)
arm64: dts: imx8mq: specify dma-ranges
arm64: dts: imx8mq: Add ARM PMU node
arm64: dts: imx8mq: Add RTC support
arm64: dts: imx8mq-evk: Enable the QuadSPI controller
arm64: dts: imx8mq: Add QuadSPI controller
arm64: dts: imx8mq: Add ECSPI support
arm64: dts: imx8mq-evk: Add fsl,magic-packet property
arm64: dts: imx8mq-evk: add missing MDIO / PHY nodes
arm64: dts: imx8mq-evk: enable USB nodes for USB3 host
arm64: dts: imx8mq: add USB nodes
arm64: dts: imx8mq: properly describe IRQ hierarchy
arm64: dts: lx2160a: update fspi node
arm64: dts: freescale: Add devicetree for Oxalis
arm64: dts: lx2160a: add FlexSPI node property
arm64: dts: imx8qxp: Fix MU4_INT number
arm64: dts: imx8mq: add GPC power domains
arm64: dts: imx8mq: Add pwm device nodes
arm64: dts: imx: add i.MX8QXP system controller RTC support
arm64: dts: imx: add imx8qxp mek support
arm64: dts: imx: add imx8qxp support
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt
arm64: dts: Amlogic updates for v5.1
- new board: G12a-based x96 max
- G12a: add peripheral clock controller and clock measure support
- s400: fix SD/eMMC max rate issues
- s400: audio: add sp/dif in support
- GX: support simplefb
* tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: dts: meson: add g12a x96 max board
dt-bindings: arm: amlogic: add amediatech x96-max bindings
arm64: dts: meson: g12a: add peripheral clock controller
arm64: dts: meson: g12a: add clk measure support
arm64: dts: meson: axg: add clk measure support
arm64: dts: meson: fix g12a buses
arm64: dts: meson-axg: add efuse device
arm64: dts: meson: s400: fix emmc maximum rate
arm64: dts: meson: s400: enable sdr104 on sdio
arm64: dts: meson-gx: add support for simplefb
dt-bindings: meson: add specific simplefb bindings
arm64: dts: meson-gx: Add canvas provider node to the vpu
arm64: dts: meson-axg: s400: add spdifin to the sound card
arm64: dts: meson-axg: s400: add spdif-dir codec
arm64: dts: meson-axg: add spdifin
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
mvebu dt64 for 5.1 (part 1)
- Interrupt support to Armada 7K/8K thermal nodes
- Armada 37xx related patches allowing to enable suspend to RAM
(USB2, USB3, PCIe, SATA, DSA)
- uDPU board support (Armada-3720 based):single-port FTTdp
distribution point unit
- Fixes for EspressoBin Ethernet support when using U-Boot mainline
- cleanup for partitions under flashes nodes
* tag 'mvebu-dt64-5.1-1' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: armada-37xx: link USB hosts with their PHYs
arm64: dts: marvell: armada-3720-espressobin: declare SATA PHY property
arm64: dts: marvell: armada-3720-espressobin: declare PCIe PHY
arm64: dts: marvell: armada-37xx: declare the COMPHY node
arm64: dts: marvell: Remove unnecessary #address-cells/#size-cells under flashes
arm64: dts: armada-3720-espressobin: Set mv88e6341 cpu port as RGMII-ID
arm64: dts: armada-3720-espressobin: Configure RGMII and SMI pins
arm64: dts: marvell: Add device tree for uDPU board
arm64: dts: marvell: armada-3720-espressobin: declare PCIe warm reset pin
arm64: dts: marvell: armada-37xx: declare PCIe reset pin
arm64: dts: marvell: armada-37xx: declare USB2 UTMI PHYs
arm64: dts: marvell: armada-37xx: fix USB2 memory region
arm64: dts: marvell: armada-37xx: declare SATA clock
arm64: dts: marvell: armada-37xx: fix SATA node scope
arm64: dts: marvell: add interrupt support to cp110 thermal node
arm64: dts: marvell: add interrupt support to ap806 thermal node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt
mt2712:
Add device nodes for usb3, iommu, smi, i2c, spi, pwm,
mmc, NAND flash and PCIe
mt6797:
add pinctrl node
enable uart pins on x20 board
enable uart pins on EVB
mt7622:
Add all CPUs to the cooling maps
mt7623a:
Remove unused binding description
mt7629:
Add binding description for the SoC and the BananaPi
based on this chip
mt8173:
Add all CPUs to the cooling maps
mt8183:
Add binding description for the SoC
* tag 'v5.0-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
dt-bindings: arm: mediatek: add support for MT7622 BPI-R64 and MT7629 RFB
dt-bindings: arm: mediatek: remove unused "mediatek, mt7623a"
dt-bindings: arm: Add bindings for Mediatek MT8183 SoC Platform
arm64: dts: add pcie nodes for MT2712
arm64: dts: add nand nodes for MT2712
arm64: dts: add mmc nodes for MT2712
arm64: dts: add pwm nodes for MT2712
arm64: dts: add spi nodes for MT2712
arm64: dts: add i2c nodes for MT2712
arm64: dts: add iommu/smi nodes for MT2712
arm64: dts: Add USB3 related nodes for MT2712
ARM64: dts: mediatek: Add all CPUs in cooling maps
arm64: dts: Add uart for mt6797 EVB
arm64: dts: mediatek: x20: Add pinmux support for UART1
arm64: dts: mediatek: mt6797: Add pinctrl support
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
arm64: tegra: Device tree changes for v5.1-rc1
This contains a couple of fixes to existing device trees, enables CPU
frequency scaling on various Tegra210 boards, enables the TCU as debug
serial port on Jetson Xavier, adds various improvements for SDMMC on
Tegra210, Tegra186 and Tegra194 boards and finally adds initial support
for the NVIDIA Shield TV.
* tag 'tegra-for-5.1-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (25 commits)
arm64: tegra: Update compatible for Tegra186 I2C
arm64: tegra: Update compatible for Tegra210 I2C
arm64: tegra: Support 200 MHz for SDMMC on Tegra194
arm64: tegra: Add CQE Support for SDMMC4
arm64: tegra: Add SDMMC auto-calibration settings
arm64: tegra: Mark TCU as primary serial port on Tegra194 P2888
arm64: tegra: Add nodes for TCU on Tegra194
arm64: tegra: Enable DFLL clock on Smaug
arm64: tegra: Add CPU power rail regulator on Smaug
arm64: tegra: Enable DFLL clock on Jetson TX1
arm64: tegra: Add pinmux for PWM-based DFLL support on P2597
arm64: tegra: Add CPU clocks on Tegra210
arm64: tegra: Add DFLL clock on Tegra210
arm64: tegra: p2771-0000: Use TEGRA186_ prefix for GPIO names
arm64: tegra: p3310: Use TEGRA186_ prefix for GPIO names
arm64: tegra: p2597: Sort nodes by unit-address
arm64: tegra: p2972: Sort nodes properly
arm64: tegra: Add regulators for Tegra210 Darcy
arm64: tegra: Add pinmux for Darcy board
arm64: tegra: Add gpio-keys nodes for Darcy
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt
Second Round of Renesas ARM64 Based SoC DT Updates for v5.1
* R-Car Gen3 SoC based Salvator-X, Salvator-XS and ULCB boards
- Enable HS400 support for eMMC
* R-Car E3 (r7a77990) SoC
- Add OPPs table for cpu devices
* RZ/G2E (r8a774c0) SoC
- Describe TMU, CMT, SDHI devices in DT
- Describe pincontrol support for SCIF2 device in DT
- Add OPPs table for cpu devices
* RZ/G2E (r8a774c0) based EK874 board and CAT875 sub-board,
and CAT874 board
- Initial support
* tag 'renesas-arm64-dt2-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: dts: renesas: cat875: Enable PCIe support
arm64: dts: renesas: r8a774c0-cat874: Add pciec0 support
arm64: dts: renesas: r8a774c0: Add TMU device nodes
arm64: dts: renesas: r8a774c0: Add CMT device nodes
arm64: dts: renesas: r8a774c0: Add OPPs table for cpu devices
arm64: dts: renesas: r8a77990: Add OPPs table for cpu devices
arm64: dts: renesas: enable HS400 on R-Car Gen3
arm64: dts: renesas: cat875: Add ethernet support
arm64: dts: renesas: r8a774c0-cat874: Add uSD support
arm64: dts: renesas: r8a774c0-cat874: Add pincontrol support to scif2
arm64: dts: renesas: Add Si-Linux EK874 board support
arm64: dts: renesas: Add Si-Linux CAT874 board support
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Allwinner arm64 DT changes for 5.1, take 2
Our usual round of DT changes for the arm64 Allwinner SoCs:
- Enabling of the various power supplies on most a64 boards
- H6 SRAM controller support
- A64 CSI support
* tag 'sunxi-dt64-for-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: a64: Enable PMIC power supplies on various boards
arm64: dts: allwinner: a64: teres-i: enable power supplies
arm64: dts: allwinner: h6: Add support for the SRAM C1 section
dt-bindings: sram: sunxi: Add compatible for the H6 SRAM C1
arm64: dts: allwinner: a64: Add A64 CSI controller
arm64: dts: allwinner: h6: Move GIC device node fix base address ordering
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Allwinner H3 and H5 changes for 5.1
Our usual round of DT changes shared between arm and arm64.
We have a bunch of changes for board, improving the eMMC support on the H5
variant of the All-H3-CC, enabling HDMI and reworking the CSI driver.
* tag 'sunxi-h3-h5-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h5: libretech-all-h3-cc: Mark eMMC HS-DDR 3.3V capable
ARM: dts: sunxi: h3/h5: Drop A31 fallback compatible for CSI controller
ARM: dts: sun8i-h3: nanopi-m1-plus: enable HDMI
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt
SoCFPGA DTS updates for v5.1
- Add SMMU node for Stratix10
- Add vendor prefix fo Novtech
- Add a new 96Boards Chameleon96 board that uses a Cyclone5 SoCFPGA
- Add missing reset properties for all IP on Cyclone5 and Arria10
* tag 'socfpga_dts_for_v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: dts: socfpga: update more missing reset properties
ARM: dts: socfpga: update missing reset property peripherals
ARM: dts: Add support for 96Boards Chameleon96 board
dt-bindings: vendor-prefixes: Add Novtech Vendor Prefix
arm64: dts: stratix10: Add Stratix10 SMMU support
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into arm/dt
ARM64: DT: Hisilicon SoCs DT updates for 5.1
* Hi6220 SoC and related boards:
- Add DMA entries to enable DMA for Bluetooth transfers
- Add power-on delay to make wifi stable
- Revert HS200 mode to avoid eMMC controller resets and block read failures
* Hi3660 SoC and related boards:
- Fix SD card detection via setting cd-gpios correctly
* Hi3798 SoC and related boards:
- Fix malformed SPDX license identifier
* tag 'hisi-arm64-dt-for-5.1v2' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hikey: Revert "Enable HS200 mode on eMMC"
arm64: dts: hikey: Give wifi some time after power-on
arm64: dts: hi3798cv200: fix malformed SPDX license identifier
arm64: dts: hikey960: fix SDcard detection
arm64: dts: hikey: Add DMA entries for Bluetooth UART
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/dt
Qualcomm ARM64 Updates for v5.1
* Add MSM8998 RPMCC, I2C, and USB related nodes
* Add MSM8996 rpmpd node
* Fix typo in MSM8996 pin definitions
* Disable MSM8996 VFE smmu to fix security violation
* Add I2C, SPI, rpmcc, uart, and WCN3990 wlan nodes on QCS404
* Enable SDCC1 HS400 support on QCS404
* Add a multitude of nodes on SDM845:
SD, UFS, USB, LPASS, SCM, QSPI, PDC, DPU, videocc, GPU, RPMh
bus interconnect, WCN3990 WLAN
* Add gpio ranges to SDM845 TLMM
* Fix regulator load on sdcard on MSM8998-mtp board
* tag 'qcom-arm64-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (41 commits)
arm64: dts: sdm845: Add interconnect provider DT nodes
arm64: dts: qcom: msm8996: Disabled VFE SMMU
arm64: dts: qcom: qcs404: Add rpmcc node
arm64: dts: qcom: msm8998: Add rpmcc node
arm64: dts: qcom: msm8998: Add USB-related nodes
arm64: dts: qcom: qcs404: Add QUP I2C and SPI nodes
arm64: dts: qcom: qcs404: Define remaining UARTs
arm64: dts: qcom: qcs404: Specify pinctrl state for UART
arm64: dts: qcom: sdm845: Fix lpasscc reg
arm64: dts: qcom: sdm845: Remove the duplicate header inclusion
arm64: dts: qcom: sdm845: Add reserve-memory nodes
arm64: dts: qcom: sdm845: Add gpio-ranges to TLMM node
arm64: dts: qcom: sdm845: Extend ranges and describe DMA space
arm64: dts: qcom: sdm845: Increase address and size cells for soc
arm64: dts: sdm845: Add rpmh powercontroller node
arm64: dts: msm8996: Add rpmpd device node
arm64: dts: sdm845: Add WCN3990 WLAN module device node
arm64: dts: qcom: sdm845: Add PDC Global reset driver node
arm64: dts: qcom: sdm845: Add SCM DT node
arm64: dts: qcom: sdm845: Fix pcs_misc region address for UNI PHY
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree updates
for 5.1, please pull the following:
- Stefan adds support for the Raspberry Pi 3 A+ by using the same
mechanism of creating a symbolic reference to the ARM 32-bit DTS file
* tag 'arm-soc/for-5.1/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: Add reference to RPi 3 A+
ARM: dts: add Raspberry Pi 3 A+
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
New boards are the Rock Pi 4, NanoPC-T4 and NanoPi-M4, with the last
two being part of a family and sharing bigger parts of the devicetree.
rk3328 got sound-related upgrades and a wider patch drops mmc display-wp
fields from nodes which shouldn't use it.
* tag 'v5.1-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: clean up the abuse of disable-wp
arm64: dts: rockchip: 'Fix' nanopi4 uSD card detect
arm64: dts: rockchip: Add NanoPC-T4 IR receiver
arm64: dts: rockchip: Refine nanopi4 differences
arm64: dts: rockchip: Add DT for NanoPi M4
arm64: dts: rockchip: add ROCK Pi 4 DTS support
arm64: dts: rockchip: Add devicetree for NanoPC-T4
arm64: dts: rockchip: enable analog audio node for rock64
arm64: dts: rockchip: move rk3328 #sound-dai-cells to the soc dtsi
arm64: dts: rockchip: add rk3328 ACODEC node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into arm/dt
AM65x DT changes for v5.1. Includes:
- EMMC support for am654-evm board
* tag 'am654-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux:
arm64: dts: ti: k3-am654-base-board: Add eMMC Support
arm64: dts: ti: k3-am654: Add Support for eMMC host controller
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.0, 3rd round:
It contains a fix for i.MX8MQ EVK board device tree, which makes the
broken eMMC support work as expected.
* tag 'imx-fixes-5.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mq: Fix boot from eMMC
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Fix for new dtc graph warnings and a regulator fix for rock64.
* tag 'v5.0-rockchip-dts64fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: enable usb-host regulators at boot on rk3328-rock64
arm64: dts: rockchip: fix graph_port warning on rk3399 bob kevin and excavator
|
|
Add on-board WiFi/BT support for Rock960 boards such as Rock960 based
on AP6356S and Ficus based on AP6354 wireless modules.
Firmwares for the respective boards are available here:
http://people.linaro.org/~manivannan.sadhasivam/rock960_wifi/
http://people.linaro.org/~manivannan.sadhasivam/ficus_wifi/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
This patch is a port of the fix from
commit 73e42e186699 ("arm64: dts: rockchip: fix rock64 gmac2io stability
issues")
As per that patch, enabling thresh dma mode force disables checksuming.
This is necessary as tx checksuming does not work with packets larger
than 1498.
The rk3328-roc-cc board exhibits tx stability issues with large packets
similar to rock64's issues. This patch resolves that issue.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
vcc5v0_host and vcc5v0_typec is supplied by vcc5v0_usb and not vcc5v0_sys.
add node for vcc5v0_usb fixed regulator.
Signed-off-by: Akash Gajjar <Akash_Gajjar@mentor.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
lcd panel pinmux is unused and the pin actually for something different,
so removing it.
Signed-off-by: Akash Gajjar <Akash_Gajjar@mentor.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
rename dc12, vcc_sys, vcc1v8_pmu regulators and make it more redable as per the
schematic of rk3399-rockpro64.
Signed-off-by: Akash Gajjar <Akash_Gajjar@mentor.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|