summaryrefslogtreecommitdiffstats
path: root/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
AgeCommit message (Collapse)AuthorFilesLines
2022-11-07arm64: dts: qcom: qcs404-*: Fix up commentsKonrad Dybcio1-1/+3
Switch '//' comments to C-style /* */. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221107145522.6706-11-konrad.dybcio@linaro.org
2022-11-07arm64: dts: qcom: qcs404: align TLMM pin configuration with DT schemaKrzysztof Kozlowski1-30/+22
DT schema expects TLMM pin configuration nodes to be named with '-state' suffix and their optional children with '-pins' suffix. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221104161131.57719-1-krzysztof.kozlowski@linaro.org
2022-10-17arm64: dts: qcom: align RPM regulators node name with bindingsKrzysztof Kozlowski1-1/+1
Node names should be generic and new DT schema expects RPM regulators node to be just "regulators". Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220926092104.111449-3-krzysztof.kozlowski@linaro.org
2022-08-29arm64: dts: qcom: replace deprecated perst-gpio with perst-gpiosDmitry Baryshkov1-1/+1
Replace deprecated perst-gpio and wake-gpio properties with up-to-date perst-gpios and wake-gpios in the Qualcomm device trees. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220506152107.1527552-9-dmitry.baryshkov@linaro.org
2022-06-27arm64: dts: qcom: align PMIC GPIO pin configuration with DT schemaKrzysztof Kozlowski1-2/+2
DT schema expects PMIC GPIO pin configuration nodes to be named with '-state' suffix. Optional children should be either 'pinconf' or followed with '-pins' suffix. This fixes dtbs_check warnings like: sdm845-xiaomi-beryllium.dtb: gpios@c000: 'vol-up-active' does not match any of the regexes: '-state$', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220507194913.261121-6-krzysztof.kozlowski@linaro.org
2022-05-05arm64: dts: qcom: correct DWC3 node names and unit addressesKrzysztof Kozlowski1-3/+4
Align DWC3 USB node names with DT schema ("usb" is expected) and correct the unit addresses to match the "reg" property. This also implies overriding nodes by label, instead of full path. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220504131923.214367-7-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21Revert "arm64: dts: qcom: Harmonize DWC USB3 DT nodes name"Greg Kroah-Hartman1-1/+1
This reverts commit eb9b7bfd5954f5f6ac4d57313541dd0294660aad as it breaks working userspace implementations (i.e. Android systems) The device node name here is part of configfs, so it is a user-visable api that can not be changed. Reported-by: John Stultz <john.stultz@linaro.org> Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/CALAqxLX_FNvFndEDWtGbFPjSzuAbfqxQE07diBJFZtftwEJX5A@mail.gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-31arm64: dts: qcom: Harmonize DWC USB3 DT nodes nameSerge Semin1-1/+1
In accordance with the DWC USB3 bindings the corresponding node name is suppose to comply with the Generic USB HCD DT schema, which requires the USB nodes to have the name acceptable by the regexp: "^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly named. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210324204836.29668-8-Sergey.Semin@baikalelectronics.ru Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-09-13arm64: dts: qcom: replace status value "ok" by "okay"Adrian Schmutzler1-6/+6
While the DT parser recognizes "ok" as a valid value for the "status" property, it is actually mentioned nowhere. Use the proper value "okay" instead, as done in the majority of files already. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Link: https://lore.kernel.org/r/20200830200845.1771-1-freifunk@adrianschmutzler.de Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-13arm64: dts: qcom: qcs404-evb: Enable USB controllersBryan O'Donoghue1-0/+35
This patch enables the primary and secondary USB controllers on the qcs404-evb. Primary: The primary USB controller has - One USB3 SS PHY using gpio-usb-conn - One USB2 HS PHY in device mode only and no connector driver associated. Secondary: The second DWC3 controller which has one USB Hi-Speed PHY attached to it. Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-msm@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20200311191517.8221-7-bryan.odonoghue@linaro.org [bjorn: Dropped usb3 role switching and enabled vbus] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-13arm64: dts: qcom: qcs404-evb: Raise vreg_l12_3p3 minimum voltageBryan O'Donoghue1-1/+1
Rather than set the minimum microvolt for this regulator in the USB SS PHY driver, set it in the DTS. Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Andy Gross <agross@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-msm@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20200311191517.8221-6-bryan.odonoghue@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-13arm64: dts: qcom: qcs404-evb: Describe external VBUS regulatorBryan O'Donoghue1-0/+12
VBUS is supplied by an external regulator controlled by a GPIO pin. This patch models the regulator as regulator-usb3-vbus. Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-msm@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20200311191517.8221-5-bryan.odonoghue@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-13arm64: dts: qcom: qcs404-evb: Define USB ID pinBryan O'Donoghue1-0/+14
The USB ID pin is used to tell if a system is a Host or a Device. For our purposes we will bind this pin into gpio-usb-conn later. For now define the pin with its pinmux. Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-msm@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20200311191517.8221-4-bryan.odonoghue@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-13arm64: dts: qcom: qcs404-evb: Define VBUS pinsBryan O'Donoghue1-0/+22
Defines VBUS detect and VBUS boost for the QCS404 EVB. Detect: VBUS present/absent is presented to the SoC via a GPIO on the EVB. Define the pin mapping for later use by gpio-usb-conn. Boost: An external regulator is used to trigger VBUS on/off via GPIO. This patch defines the relevant GPIO in the EVB dts. Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-msm@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20200311191517.8221-3-bryan.odonoghue@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-03-11arm64: dts: qcom: qcs404: Enable CQE support for eMMCVeerabhadrarao Badiganti1-0/+1
Enabling CQE support for eMMC by supplying the correct reg name and flag which indicates CQE support. Also remove the redundant _mem suffix for reg names. Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Link: https://lore.kernel.org/r/1583946863-24308-1-git-send-email-vbadigan@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-01-07arm64: dts: qcom: qcs404-evb: Set vdd_apc regulator in high power modeNiklas Cassel1-0/+1
vdd_apc is the regulator that supplies the main CPU cluster. At sudden CPU load changes, we have noticed invalid page faults on addresses with all bits shifted, as well as on addresses with individual bits flipped. By putting the vdd_apc regulator in high power mode, the voltage drops during sudden load changes will be less severe, and we have not been able to reproduce the invalid page faults with the regulator in this mode. Fixes: 8faea8edbb35 ("arm64: dts: qcom: qcs404-evb: add spmi regulators") Cc: stable@vger.kernel.org Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20191014120920.12691-1-niklas.cassel@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-16arm64: dts: qcom: qcs404-evb: Mark WCSS clocks protectedBjorn Andersson1-1/+3
'7d0c76bdf227 ("clk: qcom: Add WCSS gcc clock control for QCS404")' introduces two new clocks to gcc. These are not used before clk_disable_unused() and as such the clock framework tries to disable them. But on the EVB these registers are only accessible through TrustZone, so these clocks must be marked as "protected" to prevent the clock code from touching them. Numerical values are used as the constants are not yet available in a common tree. Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Reported-by: Mark Brown <broonie@kernel.org> Reported-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-05arm64: dts: qcom: qcs404: Add wifi rails in QCS404 dt node for proxy votesGovind Singh1-0/+3
Add wifi regulators in qcs404 dt node for proxy vote. Proxy votes are required for handling driver recovery scenarios to prevent un-clocked register access during driver recovery. Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-06-19arm64: dts: qcom: qcs404-evb: fix vdd_apc supplyJorge Ramirez-Ortiz1-1/+1
The invalid definition in the supply causes the Qualcomm's EVB-1000 and EVB-4000 not to boot. Fix the boot issue by correctly defining the supply: vdd_s3 (namely "vdd_apc") is actually connected to vph_pwr. Reported-by: Niklas Cassel <niklas.cassel@linaro.org> Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <agross@kernel.org>
2019-06-17arm64: dts: qcom: qcs404-evb: Enable PCIeBjorn Andersson1-0/+26
Enable the PCIe PHY and controller found on the QCS404 EVB. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-05-29arm64: dts: qcom: qcs404-evb: Mark CDSP clocks protectedBjorn Andersson1-0/+7
With the Trustzone based CDSP remoteproc driver these clocks are controlled elsewhere and as they are not enabled by anything in Linux the clock framework will turn them off during lateinit. This results in issues either to later start the CDSP, using the Trustzone interface, or if the CDSP is already running it will crash. Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <agross@kernel.org>
2019-05-29arm64: dts: qcom: qcs404-evb: increase s3 max voltageNiklas Cassel1-1/+1
Increase s3 max voltage in accordance to QCS404 CPR Fusing Guide Rev 6.0 Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <agross@kernel.org>
2019-05-29arm64: dts: qcom: qcs404-evb: fix l3 min voltageNiklas Cassel1-1/+1
The current l3 min voltage level is not supported by the regulator (the voltage is not a multiple of the regulator step size), so a driver requesting this exact voltage would fail, see discussion in: https://patchwork.kernel.org/comment/22461199/ It was agreed upon to set a min voltage level that is a multiple of the regulator step size. There was actually a patch sent that did this: https://patchwork.kernel.org/patch/10819313/ However, the commit 331ab98f8c4a ("arm64: dts: qcom: qcs404: Fix voltages l3") that was applied is not identical to that patch. Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <agross@kernel.org>
2019-05-29arm64: dts: qcom: qcs404-evb: Fix typoVinod Koul1-2/+2
Fix the typo "dreive-strength" and use correct property drive-strength Fixes: 7241ab944da3 ("arm64: dts: qcom: qcs404: Add sdcc1 node") Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <agross@kernel.org>
2019-03-27arm64: dts: qcom: qcs404-evb: Enable uart3 and add BluetoothBjorn Andersson1-0/+45
Enable blsp1_uart3, define its pinconf and add the bluetooth node. It seems provisioning is lacking a valid BD address, preventing the interface from initializing, so provide a dummy for now. Tested-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-03-27arm64: dts: qcom: qcs404-evb: add spmi regulatorsJorge Ramirez-Ortiz1-0/+12
Define the EVB pms405_s3 supplies. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by: Khasim Syed Mohammed <khasim.mohammed@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-03-27arm64: dts: qcom: qcs404: Remove default setting of controlled-remotely for ↵Khasim Syed Mohammed1-0/+8
BAM DMA The property controlled-remotely should not be set by default for qcs-404 device, it should be set based on the secure boot options (TZ or ATF) preferred by the platform. Hence, the controlled-remotely property is moved to platform specific dts files. Signed-off-by: Khasim Syed Mohammed <khasim.mohammed@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-03-27arm64: dts: qcom: qcs404: Fix voltages l3Bjorn Andersson1-1/+1
PMS405 L3 is outside the acceptable range, causing PCIe to fail. Fix these. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Khasim Syed Mohammed <khasim.mohammed@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> [bjorn: Hunk fixing up S5 already applied, updated commit message] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-03-27arm64: dts: qcom: qcs404: Fix regulator supply namesBjorn Andersson1-14/+14
The regulator definition got their supply names cleaned up during upstreaming, so they no longer match the driver defined names. Update the supply names. Also fill out the missing voltage of SMPS 5. Fixes: 0b363f5b871c ("arm64: dts: qcom: qcs404: Add PMS405 RPM regulators") Reported-by: Nicolas Dechesne <nicolas.dechesne@linaro.org> Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-01-24arm64: dts: qcom: qcs404: Specify pinctrl state for UARTBjorn Andersson1-0/+14
BLSP1 UART2 is used as debug uart on the EVB development board, define pinmux state for the UART in the platform dtsi and pinconf state for it in the board dts. Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-01-14arm64: dts: qcom: qcs404: Add WCN3990 WLAN module device nodeGovind Singh1-0/+4
Add device node for the ath10k SNOC platform driver probe and add resources required for WCN3990 on qcs404 soc. Optional clock and regulator controls are not yet available in upstream, hence add them once available. Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-01-14arm64: dts: qcom: qcs404: sdcc1: enable HS400Jorge Ramirez-Ortiz1-0/+1
The controller can support EXT_CSD_CARD_TYPE_HS400_1_8V cards. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-18arm64: dts: qcom: qcs404: Add remoteproc nodesBjorn Andersson1-0/+12
Add the TrustZone based remoteproc nodes and their glink edges for adsp, cdsp and wcss. Enable them for EVB common DTS. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-18arm64: dts: qcom: qcs404: add spmi nodeVinod Koul1-0/+1
PMS405 is used in QCS405-EVB so include that with SPMI nodes Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-18arm64: dts: qcom: qcs404: Add sdcc1 nodeBjorn Andersson1-0/+64
Add the sdcc1 node and enable it for the QCS404-EVB. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-18arm64: dts: qcom: qcs404: Add PMS405 RPM regulatorsBjorn Andersson1-0/+97
Add the RPM regulators found in PMS405 which is used in qcs404-evb Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-18arm64: dts: qcom: qcs404-evb: add dts files for EVBsVinod Koul1-0/+14
QCS404 has two EVBs, EVB-1000 and EVB-4000. These boards are mostly similar with few differences in the peripherals used. So use a common qcs404-evb.dtsi which contains the common parts and use qcs404-evb-1000.dts and qcs404-evb-4000.dts for diffs Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-19 22:29:19 +0000