summaryrefslogtreecommitdiffstats
path: root/arch/arm64/boot/dts/freescale
AgeCommit message (Collapse)AuthorFilesLines
2017-11-15Merge tag 'pci-v4.15-changes' of ↵Linus Torvalds2-0/+106
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - detach driver before tearing down procfs/sysfs (Alex Williamson) - disable PCIe services during shutdown (Sinan Kaya) - fix ASPM oops on systems with no Root Ports (Ard Biesheuvel) - fix ASPM LTR_L1.2_THRESHOLD programming (Bjorn Helgaas) - fix ASPM Common_Mode_Restore_Time computation (Bjorn Helgaas) - fix portdrv MSI/MSI-X vector allocation (Dongdong Liu, Bjorn Helgaas) - report non-fatal AER errors only to the affected endpoint (Gabriele Paoloni) - distribute bus numbers, MMIO, and I/O space among hotplug bridges to allow more devices to be hot-added (Mika Westerberg) - fix pciehp races during initialization and surprise link down (Mika Westerberg) - handle surprise-removed devices in PME handling (Qiang) - support resizable BARs for large graphics devices (Christian König) - expose SR-IOV offset, stride, and VF device ID via sysfs (Filippo Sironi) - create SR-IOV virtfn/physfn sysfs links before attaching driver (Stuart Hayes) - fix SR-IOV "ARI Capable Hierarchy" restore issue (Tony Nguyen) - enforce Kconfig IOV/REALLOC dependency (Sascha El-Sharkawy) - avoid slot reset if bridge itself is broken (Jan Glauber) - clean up pci_reset_function() path (Jan H. Schönherr) - make pci_map_rom() fail if the option ROM is invalid (Changbin Du) - convert timers to timer_setup() (Kees Cook) - move PCI_QUIRKS to PCI bus Kconfig menu (Randy Dunlap) - constify pci_dev_type and intel_mid_pci_ops (Bhumika Goyal) - remove unnecessary pci_dev, pci_bus, resource, pcibios_set_master() declarations (Bjorn Helgaas) - fix endpoint framework overflows and BUG()s (Dan Carpenter) - fix endpoint framework issues (Kishon Vijay Abraham I) - avoid broken Cavium CN8xxx bus reset behavior (David Daney) - extend Cavium ACS capability quirks (Vadim Lomovtsev) - support Synopsys DesignWare RC in ECAM mode (Ard Biesheuvel) - turn off dra7xx clocks cleanly on shutdown (Keerthy) - fix Faraday probe error path (Wei Yongjun) - support HiSilicon STB SoC PCIe host controller (Jianguo Sun) - fix Hyper-V interrupt affinity issue (Dexuan Cui) - remove useless ACPI warning for Hyper-V pass-through devices (Vitaly Kuznetsov) - support multiple MSI on iProc (Sandor Bodo-Merle) - support Layerscape LS1012a and LS1046a PCIe host controllers (Hou Zhiqiang) - fix Layerscape default error response (Minghuan Lian) - support MSI on Tango host controller (Marc Gonzalez) - support Tegra186 PCIe host controller (Manikanta Maddireddy) - use generic accessors on Tegra when possible (Thierry Reding) - support V3 Semiconductor PCI host controller (Linus Walleij) * tag 'pci-v4.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (85 commits) PCI/ASPM: Add L1 Substates definitions PCI/ASPM: Reformat ASPM register definitions PCI/ASPM: Use correct capability pointer to program LTR_L1.2_THRESHOLD PCI/ASPM: Account for downstream device's Port Common_Mode_Restore_Time PCI: xgene: Rename xgene_pcie_probe_bridge() to xgene_pcie_probe() PCI: xilinx: Rename xilinx_pcie_link_is_up() to xilinx_pcie_link_up() PCI: altera: Rename altera_pcie_link_is_up() to altera_pcie_link_up() PCI: Fix kernel-doc build warning PCI: Fail pci_map_rom() if the option ROM is invalid PCI: Move pci_map_rom() error path PCI: Move PCI_QUIRKS to the PCI bus menu alpha/PCI: Make pdev_save_srm_config() static PCI: Remove unused declarations PCI: Remove redundant pci_dev, pci_bus, resource declarations PCI: Remove redundant pcibios_set_master() declarations PCI/PME: Handle invalid data when reading Root Status PCI: hv: Use effective affinity mask PCI: pciehp: Do not clear Presence Detect Changed during initialization PCI: pciehp: Fix race condition handling surprise link down PCI: Distribute available resources to hotplug-capable bridges ...
2017-11-14Merge tag 'devicetree-for-4.15' of ↵Linus Torvalds1-4/+0
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: "A bigger diffstat than usual with the kbuild changes and a tree wide fix in the binding documentation. Summary: - kbuild cleanups and improvements for dtbs - Code clean-up of overlay code and fixing for some long standing memory leak and race condition in applying overlays - Improvements to DT memory usage making sysfs/kobjects optional and skipping unflattening of disabled nodes. This is part of kernel tinification efforts. - Final piece of removing storing the full path for every DT node. The prerequisite conversion of printk's to use device_node format specifier happened in 4.14. - Sync with current upstream dtc. This brings additional checks to dtb compiling. - Binding doc tree wide removal of leading 0s from examples - RTC binding documentation adding missing devices and some consolidation of duplicated bindings - Vendor prefix documentation for nutsboard, Silicon Storage Technology, shimafuji, Tecon Microprocessor Technologies, DH electronics GmbH, Opal Kelly, and Next Thing" * tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits) dt-bindings: usb: add #phy-cells to usb-nop-xceiv dt-bindings: Remove leading zeros from bindings notation kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile .gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore .gitignore: sort normal pattern rules alphabetically dt-bindings: add vendor prefix for Next Thing Co. scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9 of: dynamic: fix memory leak related to properties of __of_node_dup of: overlay: make pr_err() string unique of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove of: overlay: remove unneeded check for NULL kbasename() of: overlay: remove a dependency on device node full_name of: overlay: simplify applying symbols from an overlay of: overlay: avoid race condition between applying multiple overlays of: overlay: loosen overly strict phandle clash check of: overlay: expand check of whether overlay changeset can be removed of: overlay: detect cases where device tree may become corrupt of: overlay: minor restructuring ...
2017-11-09kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.libMasahiro Yamada1-3/+0
If CONFIG_OF_ALL_DTBS is enabled, "make ARCH=arm64 dtbs" compiles each DTB twice; one from arch/arm64/boot/dts/*/Makefile and the other from the dtb-$(CONFIG_OF_ALL_DTBS) line in arch/arm64/boot/dts/Makefile. It could be a race problem when building DTBS in parallel. Another minor issue is CONFIG_OF_ALL_DTBS covers only *.dts in vendor sub-directories, so this broke when Broadcom added one more hierarchy in arch/arm64/boot/dts/broadcom/<soc>/. One idea to fix the issues in a clean way is to move DTB handling to Kbuild core scripts. Makefile.dtbinst already recognizes dtb-y natively, so it should not hurt to do so. Add $(dtb-y) to extra-y, and $(dtb-) as well if CONFIG_OF_ALL_DTBS is enabled. All clutter things in Makefiles go away. As a bonus clean-up, I also removed dts-dirs. Just use subdir-y directly to traverse sub-directories. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Arnd Bergmann <arnd@arndb.de> [robh: corrected BUILTIN_DTB to CONFIG_BUILTIN_DTB] Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-08kbuild: clean up *.dtb and *.dtb.S patterns from top-level MakefileMasahiro Yamada1-1/+0
We need to add "clean-files" in Makfiles to clean up DT blobs, but we often miss to do so. Since there are no source files that end with .dtb or .dtb.S, so we can clean-up those files from the top-level Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12arm64: dts: ls1046a: Add PCIe controller DT nodesHou Zhiqiang1-0/+75
LS1046a implements 3 PCIe 3.0 controllers. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Minghuan Lian <minghuan.Lian@nxp.com> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2017-10-12arm64: dts: ls1012a: Add PCIe controller DT nodeHou Zhiqiang1-0/+24
Add PCIe controller node for ls1012a platform. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Minghuan Lian <minghuan.Lian@nxp.com> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2017-10-12arm64: dts: ls1012a: Add MSI controller DT nodeHou Zhiqiang1-0/+7
Add MSI controller node for ls1012a platform. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Minghuan Lian <minghuan.Lian@nxp.com> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2017-09-10Merge tag 'armsoc-devicetree' of ↵Linus Torvalds11-26/+168
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM/arm64 Devicetree updates from Olof Johansson: "As usual, device tree updates is the bulk of our material in this merge window. This time around, 559 patches affecting both 32- and 64-bit platforms. Changes are too many to list individually, but some of the larger ones: New platform/SoC support: - Automotive: + Renesas R-Car D3 (R8A77995) + TI DT76x + MediaTek mt2712e - Communication-oriented: + Qualcomm IPQ8074 + Broadcom Stingray + Marvell Armada 8080 - Set top box: + Uniphier PXs3 Besides some vendor reference boards for the SoC above, there are also several new boards/machines: - TI AM335x Moxa UC-8100-ME-T open platform - TI AM57xx Beaglebone X15 Rev C - Microchip/Atmel sama5d27 SoM1 EK - Broadcom Raspberry Pi Zero W - Gemini-based D-Link DIR-685 router - Freescale i.MX6: + Toradex Apalis module + Apalis and Ixora carrier boards + Engicam GEAM6UL Starter Kit - Freescale i.MX53-based Beckhoff CX9020 Embedded PC - Mediatek mt7623-based BananaPi R2 - Several Allwinner-based single-board computers: + Cubietruck plus + Bananapi M3, M2M and M64 + NanoPi A64 + A64-OLinuXino + Pine64 - Rockchip RK3328 Pine64/Rock64 board support - Rockchip RK3399 boards: + RK3399 Sapphire module on Excavator carrier (RK3399 reference design) + Theobroma Systems RK3399-Q7 SoM - ZTE ZX296718 PCBOX Board" * tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (559 commits) ARM: dts: at91: at91sam9g45: add AC97 arm64: dts: marvell: mcbin: enable more networking ports arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node arm64: dts: marvell: add TX interrupts for PPv2.2 arm64: dts: uniphier: add PXs3 SoC support ARM: dts: uniphier: add pinctrl groups of ethernet phy mode ARM: dts: uniphier: fix size of sdctrl nodes ARM: dts: uniphier: add AIDET nodes arm64: dts: uniphier: fix size of sdctrl node arm64: dts: uniphier: add AIDET nodes Revert "ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Beelink X2" arm64: dts: uniphier: add reset controller node of analog amplifier arm64: dts: marvell: add Device Tree files for Armada-8KP arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM dt-bindings: add rk3399-q7 SoM ARM: dts: rockchip: enable usb for rv1108-evb ARM: dts: rockchip: add usb nodes for rv1108 SoCs dt-bindings: update grf-binding for rv1108 SoCs ARM: dts: aspeed-g4: fix AHB window size of the SMC controllers ...
2017-08-31arm64: dts: ls1046a: Add MSI dts nodeMinghuan Lian1-0/+31
LS1046a includes 3 MSI controllers. Each controller supports 128 interrupts. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-31arm64: dts: ls1043a: Share all MSIsMinghuan Lian1-3/+3
In order to maximize the use of MSI, a PCIe controller will share all MSI controllers. The patch changes "msi-parent" to refer to all MSI controller dts nodes. Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-31arm64: dts: ls1043a: Fix typo of MSI compatible stringMinghuan Lian1-3/+3
"1" should be replaced by "l". This is a typo. The patch is to fix it. Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-14arm64: dts: ls1088: Correction in Board name from "L1088A" to "LS1088A"Ashish Kumar1-1/+1
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-08-14arm64: dts: ls208xa: add cpu idle supportYuantian Tang3-0/+39
ls208xa supports another cpu idle state which is pw20 which saves more power when cpu is idle. It was implemented through psci firmware. Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-08-14arm64: dts: ls1088a: add cpu idle supportYuantian Tang1-0/+22
ls1088a supports another cpu idle state which is ph20 which saves more power when cpu is idle. It was implemented through psci firmware. Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-08-05arm64: dts: freescale: ls1088a: add crypto nodeHoria Geantă1-0/+43
LS1088A has a SEC v5.3 security engine. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-08-05arm64: dts: freescale: ls208xa: add crypto nodeHoria Geantă1-0/+41
LS208xA has a SEC v5.1 security engine. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-08-05arm64: dts: freescale: ls208xa: share aliases nodeHoria Geantă6-25/+5
aliases node is identical for all boards, thus move it to the common file ls208xa.dtsi. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-07-25arm64: dts: ls1012a: add USB host controller nodesRan Wang1-0/+17
LS1012A has one USB 3.0(DWC3) controller and one USB 2.0 controller. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-06-14arm64: dts: ls1088a: update sata nodeYuantian Tang1-2/+2
1. Remove ls1043a compatible string from node 2. Fix the sata ecc register address error Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-06-05arm64: dts: ls1012a: Add coreclkScott Wood1-2/+10
ls1012a has separate input root clocks for core PLLs versus the platform PLL, with the latter described as sysclk in the hw docs. Accordingly, update the clock-frequency in sysclk to 125M as platform input clock. Signed-off-by: Scott Wood <oss@buserror.net> Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-06-05arm64: dts: ls1046a: Add dis_rxdet_inp3_quirk property to USB3 nodeRan Wang1-0/+3
Add "dis_rxdet_inp3_quirk" boolean property to USB3 node. This property is used to disable rx detection in P3 PHY mode. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-06-05arm64: dts: ls208xa: disable SD UHS-I modes by default on RDByinbo.zhu1-4/+0
Currently SD UHS-I modes were enabled by default on LS208xARDB boards, but the new LS2088ARDB RevF board didn't support them any more since SDHC circuit had been reworked. This patch is to disable SD UHS-I modes by default in case of any issue on LS2088ARDB RevF Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com> Acked-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-05-25arm64: dts: ls1043a: Add generic compatible string for I2C EEPROMJavier Martinez Canillas1-2/+2
The at24 driver allows to register I2C EEPROM chips using different vendor and devices, but the I2C subsystem does not take the vendor into account when matching using the I2C table since it only has device entries. But when matching using an OF table, both the vendor and device has to be taken into account so the driver defines only a set of compatible strings using the "atmel" vendor as a generic fallback for compatible I2C devices. So add this generic fallback to the device node compatible string to make the device to match the driver using the OF device ID table. Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-05-21arm64: dts: add LS1046A DPAA FMan nodesMadalin Bucur4-1/+120
Add the DPAA 1.x FMan device tree nodes for LS1046A boards. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-05-21arm64: dts: add LS1043A DPAA FMan supportMadalin Bucur4-1/+132
Add the DPAA 1.x FMan device tree nodes for LS1043A boards. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-05-21arm64: dts: add DPAA FMan nodesMadalin Bucur9-0/+411
Add the DPAA 1.x FMan nodes for the ARM based platforms. Using separate files for each port as not all ports are used on all devices. Different numbering of ports is also possible on different devices. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-05-16arm64: dts: add LS1046A DPAA QBMan nodesMadalin Bucur1-0/+54
Add the QBMan device tree nodes for LS1046A devices. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-05-16arm64: dts: add LS1043A DPAA QBMan nodesMadalin Bucur1-0/+53
Add the DPAA 1.x QMan and BMan nodes in the LS1043A device tree. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-05-16arm64: dts: add DPAA QBMan portalsMadalin Bucur2-0/+151
Add the DPAA 1.x DPAA QMan and BMan portal nodes. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-05-15arm64: dts: ls1088a: Add TMU device tree supportYuantian Tang1-0/+88
Add nodes and properties for thermal management support. Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-05-15arm64: dts: ls1088a: update the sata nodeYuantian Tang1-1/+4
1. Sata ecc should be disabled due to a erratum. Provide the ecc register address for driver to use. 2. Enable dma coherence operation Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-05-15arm64: dts: Add flash node for ls1088a qds and rdbPrabhakar Kushwaha3-4/+40
LS1088AQDS consist of NOR, NAND and FPGA connected over IFC LS1088ARDB consist of NAND and FPGA connected over IFC. So add flash information in ifc node of device tree. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-05-15arm64: dts: ls1088a: add esdhc nodeYangbo Lu3-0/+20
Add esdhc node for ls1088a and enable it on both RDB and QDS boards. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-05-15arm64: dts: ls1012a: add eSDHC nodesYangbo Lu3-0/+46
There are two eSDHC controllers in LS1012A. This patch is to add eSDHC nodes for ls1012a dts. Also enable eSDHC for RDB/QDS boards. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-05-15arm64: dts: ls208xa: support SD UHS-I on RDB and eMMC HS200 on QDSYangbo Lu3-1/+6
This patch is to enable SD UHS-I mode on LS208xRDB and eMMC HS200 mode on LS208xQDS in dts. Also, the eSDHC peripheral clock must be used instead of platform clock to support these modes. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-05-15arm64: dts: ls1046a: support SD UHS-I and eMMC HS200 on RDBYangbo Lu2-2/+10
This patch is to enable SD UHS-I mode and eMMC HS200 mode on LS1046ARDB in dts. Also, the eSDHC peripheral clock must be used instead of platform clock to support these modes. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-05-15arm64: dts: Define big endian of IFC for LS1043a/LS1046aPrabhakar Kushwaha2-0/+2
Integrated flash controller present in LS1043A and LS1046A is big endian. So add big endian property in the devive tree. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-05-15arm64: dts: freescale: update the copyright claimsLi Yang20-20/+28
Update the copyright claims to comply with company policy. Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-03-29arm64: dts: Add support for FSL's LS1088A SoCHarninder Rai4-0/+507
LS1088A contains eight ARM v8 CortexA53 processor cores with 32 KB L1-D cache and 32 KB L1-I cache Features summary Eight 32-bit / 64-bit ARM v8 Cortex-A53 CPUs - Arranged as two clusters of four cores sharing a 1 MB L2 cache - Speed Up to 1.5 GHz - Support for cluster power-gating. Cache coherent interconnect (CCI-400) - Hardware-managed data coherency - Up to 700 MHz One 64-bit DDR4 SDRAM memory controller with ECC Data path acceleration architecture 2.0 (DPAA2) Three PCIe 3.0 controllers One serial ATA (SATA 3.0) controller Three high-speed USB 3.0 controllers with integrated PHY Following levels of DTSI/DTS files have been created for the LS1088A SoC family: - fsl-ls1088a.dtsi: DTS-Include file for NXP LS1088A SoC. - fsl-ls1088a-qds.dts: DTS file for NXP LS1088A QDS board. - fsl-ls1088a-rdb.dts: DTS file for NXP LS1088A RDB board Signed-off-by: Harninder Rai <harninder.rai@nxp.com> Signed-off-by: Ashish Kumar <ashish.kumar@nxp.com> Signed-off-by: Raghav Dogra <raghav.dogra@nxp.com>` Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-03-29arm64: dts: ls1012a: add crypto nodeHoria Geantă1-1/+99
LS1012A has a SEC v5.4 security engine. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-03-16arm64: dts: ls1012a: add thermal monitor nodeYuantian Tang1-0/+77
There is a thermal monitoring unit on ls1012a soc which can monitor and record the temperature of cores so that appropriate actions can be taken or alarm the user when the temperature exceeds a programmed temperature threshold. Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-03-14arm64: dts: updated sata node on ls1012a platformYuantian Tang4-1/+16
Updated sata node to add ecc register address and dma coherence property. Enable sata on ls1012a platforms as well. Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-03-08arm64: dts: added ecc register address to sata node on ls1046aTang Yuantian1-1/+3
For ls1046 sata, ecc should be disabled due to a erratum. Provide the ecc register address for driver to use. Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-03-08arm64: dts: added ecc register address to sata node on ls1043aTang Yuantian1-1/+3
For ls1043 sata, ecc should be disabled due to a erratum. Provide the ecc register address for driver to use. Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-03-07arm64: dts: freescale: ls2088a: Add DTS support for FSL's LS2088A SoCAbhimanyu Saini4-0/+295
This patch adds the device tree support for FSL LS2088A SoC based on ARMv8 architecture. Following levels of DTSI/DTS files have been created for the LS2088A SoC family: - fsl-ls2088a.dtsi: DTS-Include file for FSL LS2088A SoC. - fsl-ls2088a-qds.dts: DTS file for FSL LS2088A QDS board. - fsl-ls2088a-rdb.dts: DTS file for FSL LS2088A RDB board. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Ashish Kumar <ashish.kumar@nxp.com> Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-03-07arm64: dts: freescale: ls2080a: Split devicetree for code resuabilityAbhimanyu Saini6-1030/+1182
LS2088A and LS2080A are similar SoCs with a few differences like ARM cores etc. Reorganize the LS2080A device tree to move the common nodes to: - fsl-ls208xa.dtsi - fsl-ls208xa-rdb.dtsi - fsl-ls208xa-qds.dtsi Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Ashish Kumar <ashish.kumar@nxp.com> Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-10arm64: dts: ls1046a: Add TMU device tree supportJia Hongtao1-0/+80
Also add nodes and properties for thermal management support. Signed-off-by: Jia Hongtao <hongtao.jia@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-10arm64: dts: Add support for FSL's LS1012A SoCHarninder Rai5-0/+552
LS1012A features an advanced 64-bit ARM v8 CortexA53 processor with 32 KB of parity protected L1-I cache, 32 KB of ECC protected L1-D cache, as well as 256 KB of ECC protected L2 cache. Features summary One 64-bit ARM-v8 Cortex-A53 core with the following capabilities - Arranged as a cluster of one core supporting a 256 KB L2 cache with ECC protection - Speed up to 800 MHz - Parity-protected 32 KB L1 instruction cache and 32 KB L1 data cache - Neon SIMD engine - ARM v8 cryptography extensions One 16-bit DDR3L SDRAM memory controller ARM core-link CCI-400 cache coherent interconnect Cryptography acceleration (SEC) One Configurable x3 SerDes One PCI Express Gen2 controller, supporting x1 operation One serial ATA (SATA Gen 3.0) controller One USB 3.0/2.0 controller with integrated PHY Following levels of DTSI/DTS files have been created for the LS1012A SoC family: - fsl-ls1012a.dtsi: DTS-Include file for FSL LS1012A SoC. - fsl-ls1012a-frdm.dts: DTS file for FSL LS1012A FRDM board. - fsl-ls1012a-qds.dts: DTS file for FSL LS1012A QDS board. - fsl-ls1012a-rdb.dts: DTS file for FSL LS1012A RDB board. Signed-off-by: Harninder Rai <harninder.rai@nxp.com> Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-03arm64: dts: ls2080a-rdb: remove disable status of pca9547Meng Yi1-1/+0
pca9547 won't probed since its status property is disabled. while there are devices connected to it, we need remove status property to let ds3232 and adt7461 probed correctly. Signed-off-by: Meng Yi <meng.yi@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-01 08:46:02 +0000