summaryrefslogtreecommitdiffstats
path: root/arch/arm/plat-s5p
AgeCommit message (Collapse)AuthorFilesLines
2012-03-15Merge branch 'samsung/soc' into next/soc2Arnd Bergmann2-6/+48
* samsung/soc: ARM: EXYNOS: fix cycle count for periodic mode of clock event timers ARM: EXYNOS: add support JPEG ARM: EXYNOS: Add DMC1, allow PPMU access for DMC ARM: SAMSUNG: Correct MIPI-CSIS io memory resource definition ARM: SAMSUNG: fix __init attribute on regarding s3c_set_platdata() ARM: SAMSUNG: Add __init attribute to samsung_bl_set() ARM: S5PV210: Add usb otg phy control ARM: S3C64XX: Add usb otg phy control ARM: EXYNOS: Enable l2 configuration through device tree ARM: EXYNOS: remove useless code to save/restore L2 ARM: EXYNOS: save L2 settings during bootup ARM: S5P: add L2 early resume code ARM: EXYNOS: Add support AFTR mode on EXYNOS4210 ARM: SAMSUNG: use spin_lock_irqsave() in clk_{enable,disable} ARM: S3C64XX: Define some additional always off clocks ARM: S3C64XX: Reduce residency requirement for cpuidle WFI mode ARM: SAMSUNG: Add a callback 'notify_after' for PWM backlight control ARM: SAMSUNG: add G2D to plat-s5p and mach-exynos ARM: S3C64XX: Gate some more clocks by default ARM: S3C64XX: Add basic cpuidle driver Conflicts: arch/arm/mach-exynos/clock.c arch/arm/mach-exynos/common.c This merges the earlier samsung support into the next/soc2 branch to resolve conflicts between commits in the earlier work and the exynos5 branch. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-14ARM: EXYNOS: add interrupt definitions for EXYNOS5250Kukjin Kim1-6/+19
This patch adds the interrupt definitions for EXYNOS5250 at <mach/irqs.h> file and it is needed for EXYNOS5250 SoC. As a note, for single zImage of EXYNOS4 and EXYNOS5, prefix of EXYNOS4_ and EXYNOS5_ has been added. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-03-14ARM: EXYNOS: add support for EXYNOS5250 SoCKukjin Kim1-2/+2
This patch add support for EXYNOS5250 SoC has two Cortex-A15 cores. Since actually, most codes in mach-exynos/ are used commonly for EXYNOS4 and EXYNOS5 the EXYNOS5/EXYNOS5250 has been implemented in mach-exynos/. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-03-14ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5Kukjin Kim2-1/+6
Actually, the base address of uart is different between EXYNOS4 and EXYNOS5 and this patch enables to support uart for EXYNOS4 and EXYNOS5 SoCs at runtime. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-03-14ARM: EXYNOS: add clock part for EXYNOS5250 SoCKukjin Kim1-0/+36
This patch adds clock-exynos5.c for EXYNOS5250 now and that can be used for other EXYNOS5 SoCs later. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-03-10ARM: EXYNOS: add support JPEGAndrzej Pietrasiewicz1-0/+5
This patch adds platform_device, clock, map for JPEG Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-03-09ARM: S5P: add L2 early resume codeAmit Daniel Kachhap1-6/+38
This patch adds code to resume L2 before MMU is enabled in suspend and cpuidle resume paths. s3c_cpu_resume is moved to the data section with appropriate comments. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Amit Daniel Kachhap <amit.kachhap@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-02-11ARM: SAMSUNG: add G2D to plat-s5p and mach-exynosKamil Debski1-0/+5
G2D is a 2D graphics accelerator engine present in the s5p family of Samsung SoCs. It is capable of bitblt and raster operations on images having dimensions of up to 8000x8000. Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-01-21ARM: SAMSUNG: use static declaration when it is not used in other filesKukjin Kim2-2/+2
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-01-07Merge branch 'driver-core-next' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core * 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (73 commits) arm: fix up some samsung merge sysdev conversion problems firmware: Fix an oops on reading fw_priv->fw in sysfs loading file Drivers:hv: Fix a bug in vmbus_driver_unregister() driver core: remove __must_check from device_create_file debugfs: add missing #ifdef HAS_IOMEM arm: time.h: remove device.h #include driver-core: remove sysdev.h usage. clockevents: remove sysdev.h arm: convert sysdev_class to a regular subsystem arm: leds: convert sysdev_class to a regular subsystem kobject: remove kset_find_obj_hinted() m86k: gpio - convert sysdev_class to a regular subsystem mips: txx9_sram - convert sysdev_class to a regular subsystem mips: 7segled - convert sysdev_class to a regular subsystem sh: dma - convert sysdev_class to a regular subsystem sh: intc - convert sysdev_class to a regular subsystem power: suspend - convert sysdev_class to a regular subsystem power: qe_ic - convert sysdev_class to a regular subsystem power: cmm - convert sysdev_class to a regular subsystem s390: time - convert sysdev_class to a regular subsystem ... Fix up conflicts with 'struct sysdev' removal from various platform drivers that got changed: - arch/arm/mach-exynos/cpu.c - arch/arm/mach-exynos/irq-eint.c - arch/arm/mach-s3c64xx/common.c - arch/arm/mach-s3c64xx/cpu.c - arch/arm/mach-s5p64x0/cpu.c - arch/arm/mach-s5pv210/common.c - arch/arm/plat-samsung/include/plat/cpu.h - arch/powerpc/kernel/sysfs.c and fix up cpu_is_hotpluggable() as per Greg in include/linux/cpu.h
2012-01-06Merge branch 'driver-core-next' into Linux 3.2Greg Kroah-Hartman2-2/+2
This resolves the conflict in the arch/arm/mach-s3c64xx/s3c6400.c file, and it fixes the build error in the arch/x86/kernel/microcode_core.c file, that the merge did not catch. The microcode_core.c patch was provided by Stephen Rothwell <sfr@canb.auug.org.au> who was invaluable in the merge issues involved with the large sysdev removal process in the driver-core tree. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-05Merge branch 'restart' into for-linusRussell King2-145/+0
Conflicts: arch/arm/mach-exynos/cpu.c The changes to arch/arm/mach-exynos/cpu.c were moved to mach-exynos/common.c.
2012-01-05Merge branch 'for-russell' of git://hansjkoch.de/git/linux-tcc into HEADRussell King1-0/+1
Conflicts: arch/arm/plat-omap/include/plat/common.h
2012-01-03ARM: 7257/1: EXYNOS: introduce arch/arm/mach-exynos/common.[ch]Kukjin Kim2-105/+0
This patch introduces common.[ch] which are used only in the arch/arm/mach-exynos/ directory. The common.c file merges the cpu.c, init.c, irq-combiner.c and irq-eint.c files which are used commonly on EXYNOS SoCs and the common.h file replaces with plat/exynos4.h file. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-23ARM: 7248/1: S5PV210: introduce arch/arm/mach-s5pv210/common.[ch]Kukjin Kim1-10/+0
This patch introduces common.[ch] which are used only in the arch/arm/mach-s5pv210/ directory. The common.c file merges the cpu.c and init.c which are used commonly on S5PCV210/S5PC100 SoC and the common.h local header file replaces with plat/s5pv210.h file. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-23ARM: 7247/1: S5PC100: introduce arch/arm/mach-s5pc100/common.[ch]Kukjin Kim1-10/+0
This patch introduces common.[ch] which are used only in the arch/arm/mach-s5pc100/ directory. The common.c file merges the cpu.c and init.c which are used commonly on S5PC100 SoC and the common.h local header file replaces with plat/s5pc100.h file. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-23ARM: 7246/1: S5P64X0: introduce arch/arm/mach-s5p64x0/common.[ch]Kukjin Kim1-20/+0
This patch introduces common.[ch] which are used only in the arch/arm/mach-s5p64x0/ directory. The common.c file merges the cpu.c, init.c and irq-eint.c files which are used commonly on S5P64X0 SoCs and the common.h local header file replaces with plat/s5p6440.h and plat/s5p6450.h files. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-21driver-core: remove sysdev.h usage.Kay Sievers2-2/+2
The sysdev.h file should not be needed by any in-kernel code, so remove the .h file from these random files that seem to still want to include it. The sysdev code will be going away soon, so this include needs to be removed no matter what. Cc: Jiandong Zheng <jdzheng@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: "Venkatesh Pallipadi Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
2011-12-18ARM: 7205/2: sched_clock: allow sched_clock to be selected at runtimeMarc Zyngier1-16/+3
sched_clock() is yet another blocker on the road to the single image. This patch implements an idea by Russell King: http://www.spinics.net/lists/linux-omap/msg49561.html Instead of asking the platform to implement both sched_clock() itself and the rollover callback, simply register a read() function, and let the ARM code care about sched_clock() itself, the conversion to ns and the rollover. sched_clock() uses this read() function as an indirection to the platform code. If the platform doesn't provide a read(), the code falls back to the jiffy counter (just like the default sched_clock). This allow some simplifications and possibly some footprint gain when multiple platforms are compiled in. Among the drawbacks, the removal of the *_fixed_sched_clock optimization which could negatively impact some platforms (sa1100, tegra, versatile and omap). Tested on 11MPCore, OMAP4 and Tegra. Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Colin Cross <ccross@android.com> Cc: Erik Gilling <konkers@android.com> Cc: Olof Johansson <olof@lixom.net> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Alessandro Rubini <rubini@unipv.it> Cc: STEricsson <STEricsson_nomadik_linux@list.st.com> Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Ben Dooks <ben-linux@fluff.org> Tested-by: Jamie Iles <jamie@jamieiles.com> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Krzysztof Halasa <khc@pm.waw.pl> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-05Merge branch 'for-rmk' of ↵Russell King1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into devel-stable Conflicts: arch/arm/common/gic.c arch/arm/plat-omap/include/plat/common.h
2011-11-17ARM: S5P: Fix export.h inclusionKukjin Kim1-0/+1
Commit 32aaeffbd4a7 ("Merge branch 'modsplit-Oct31 2011'...") breaks build like following and this fixes it to add inclusion <linux/export.h>. arch/arm/plat-s5p/sysmmu.c:302: error: 'THIS_MODULE' undeclared here (not in a function) Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-11-15ARM: gic: allow GIC to support non-banked setupsMarc Zyngier1-0/+1
The GIC support code is heavily using the fact that hardware implementations are exposing banked registers. Unfortunately, it looks like at least one GIC implementation (EXYNOS) offers both the distributor and the CPU interfaces at different addresses, depending on the CPU. This problem is solved by allowing the distributor and CPU interface addresses to be per-cpu variables for the platforms that require it. The EXYNOS code is updated not to mess with the GIC internals while handling interrupts, and struct gic_chip_data is back to being private. The DT binding for the gic is updated to allow an optional "cpu-offset" value, which is used to compute the various base addresses. Finally, a new config option (GIC_NON_BANKED) is used to control this feature, so the overhead is only present on kernels compiled with support for EXYNOS. Tested on Origen (EXYNOS4) and Panda (OMAP4). Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2011-11-06ARM: EXYNOS: Add ARCH_EXYNOS and reorganize arch/arm/mach-exynosKukjin Kim2-4/+4
The arch/arm/mach-exynos4 directory (CONFIG_ARCH_EXYNOS4) has made for plaforms based on EXYNOS4 SoCs. But since upcoming Samsung's SoCs such as EXYNOS5 (ARM Cortex A15) can reuse most codes in current mach-exynos4, one mach-exynos directory will be used for them. This patch changes to CONFIG_ARCH_EXYNOS (arch/arm/mach-exynos) but keeps original CONFIG_ARCH_EXYNOS4 in mach-exynos/Kconfig to avoid changing in driver side. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-11-05Merge branch 'next/cleanup3' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds33-1403/+78
* 'next/cleanup3' of git://git.linaro.org/people/arnd/arm-soc: (79 commits) ARM: SAMSUNG: Move fimc plat. device from board files to plat-samsung ARM: SAMSUNG: Cleanup resources by using macro ARM: SAMSUNG: Cleanup plat-samsung/devs.c and devs.h ARM: S5P: To merge devs.c files to one devs.c ARM: S3C64XX: To merge devs.c files to one devs.c ARM: S3C24XX: To merge s3c24xx devs.c files to one devs.c ARM: S5P64X0: Add Power Management support ARM: S5P: Make the sleep code common for S5P series SoCs ARM: S5P: Make the common S5P PM code conditionally compile ARM: SAMSUNG: Move S5P header files to plat-samsung ARM: SAMSUNG: Move S3C24XX header files to plat-samsung ARM: SAMSUNG: Moving each SoC support header files ARM: SAMSUNG: Consolidate plat/pll.h ARM: SAMSUNG: Consolidate plat/pwm-clock.h ARM: SAMSUNG: Cleanup mach/clkdev.h ARM: SAMSUNG: remove sdhci default configuration setup platform helper ARM: EXYNOS4: Add FIMC device on SMDKV310 board ARM: EXYNOS4: Add header file protection macros ARM: EXYNOS4: Add usb ehci device to the SMDKV310 ARM: S3C2443: Add hsspi-clock from pclk and rename S3C2443 hsspi sclk ... Fix up conflicts in - arch/arm/mach-exynos4/{Kconfig,clock.c} ARM_CPU_SUSPEND, various random device tables (gah!) - drivers/gpio/Makefile sa1100 gpio added, samsung gpio drivers merged
2011-11-01Merge branch 'next/board' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds3-18/+88
* 'next/board' of git://git.linaro.org/people/arnd/arm-soc: (34 commits) ep93xx: add support Vision EP9307 SoM ARM: mxs: Add initial support for DENX MX28 ARM: EXYNOS4: Add support SMDK4412 Board ARM: EXYNOS4: Add MCT support for EXYNOS4412 ARM: EXYNOS4: Add functions for gic interrupt handling ARM: EXYNOS4: Add support clock for EXYNOS4412 ARM: EXYNOS4: Add support new EXYNOS4412 SoC ARM: EXYNOS4: Add support MCT PPI for EXYNOS4212 ARM: EXYNOS4: Add support PPI in external GIC ARM: EXYNOS4: convert boot_params to atag_offset ixp4xx: support omicron ixp425 based boards ARM: EXYNOS4: Add support SMDK4212 Board ARM: EXYNOS4: Add support PM for EXYNOS4212 ARM: EXYNOS4: Add support clock for EXYNOS4212 ARM: EXYNOS4: Add support new EXYNOS4212 SoC at91: USB-A9G20 C01 & C11 board support at91: merge board USB-A9260 and USB-A9263 together at91: add support for RSIs EWS board ARM: SAMSUNG: Fix mask value for S5P64X0 CPU IDs ARM: SAMSUNG: Fix mask for S3C64xx CPU IDs ...
2011-11-01Merge branch 'next/cleanup' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds2-62/+0
* 'next/cleanup' of git://git.linaro.org/people/arnd/arm-soc: (125 commits) ARM: mach-mxs: fix machines' initializers order mmc: mxcmmc: explicitly includes mach/hardware.h arm/imx: explicitly includes mach/hardware.h in pm-imx27.c arm/imx: remove mx27_setup_weimcs() from mx27.h arm/imx: explicitly includes mach/hardware.h in mach-kzm_arm11_01.c arm/imx: remove mx31_setup_weimcs() from mx31.h ARM: tegra: devices.c should include devices.h ARM: tegra: cpu-tegra: unexport two functions ARM: tegra: cpu-tegra: sparse type fix ARM: tegra: dma: staticify some tables and functions ARM: tegra: tegra2_clocks: don't export some tables ARM: tegra: tegra_powergate_is_powered should be static ARM: tegra: tegra_rtc_read_ms should be static ARM: tegra: tegra_init_cache should be static ARM: tegra: pcie: 0 -> NULL changes ARM: tegra: pcie: include board.h ARM: tegra: pcie: don't cast __iomem pointers ARM: tegra: tegra2_clocks: 0 -> NULL changes ARM: tegra: tegra2_clocks: don't cast __iomem pointers ARM: tegra: timer: don't cast __iomem pointers ... Fix up trivial conflicts in arch/arm/mach-omap2/Makefile, arch/arm/mach-u300/{Makefile.boot,core.c} arch/arm/plat-{mxc,omap}/devices.c
2011-10-26Merge branch 'tty-next' of ↵Linus Torvalds4-142/+12
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty * 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits) TTY: serial_core: Fix crash if DCD drop during suspend tty/serial: atmel_serial: bootconsole removed from auto-enumerates Revert "TTY: call tty_driver_lookup_tty unconditionally" tty/serial: atmel_serial: add device tree support tty/serial: atmel_serial: auto-enumerate ports tty/serial: atmel_serial: whitespace and braces modifications tty/serial: atmel_serial: change platform_data variable name tty/serial: RS485 bindings for device tree TTY: call tty_driver_lookup_tty unconditionally TTY: pty, release tty in all ptmx_open fail paths TTY: make tty_add_file non-failing TTY: drop driver reference in tty_open fail path 8250_pci: Fix kernel panic when pch_uart is disabled h8300: drivers/serial/Kconfig was moved parport_pc: release IO region properly if unsupported ITE887x card is found tty: Support compat_ioctl get/set termios_locked hvc_console: display printk messages on console. TTY: snyclinkmp: forever loop in tx_load_dma_buffer() tty/n_gsm: avoid fifo overflow in gsm_dlci_data_output tty/n_gsm: fix a bug in gsm_dlci_data_output (adaption = 2 case) ... Fix up Conflicts in: - drivers/tty/serial/8250_pci.c Trivial conflict with removed duplicate device ID - drivers/tty/serial/atmel_serial.c Annoying silly conflict between "specify the port num via platform_data" and other changes to atmel_console_init
2011-10-21ARM: S5P: fix offset calculation on gpio-interruptMarek Szyprowski1-3/+3
Offsets of the irq controller registers were calculated correctly only for first GPIO bank. This patch fixes calculation of the register offsets for all GPIO banks. Reported-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-20Merge branch 'tegra/cleanup' into next/cleanupArnd Bergmann1-4/+5
2011-10-17Merge branch 'ep93xx/board' into next/boardArnd Bergmann1-4/+5
2011-10-06ARM: S5P: To merge devs.c files to one devs.cKukjin Kim14-664/+0
This patch moves regarding s5p dev files to one devs.c file in plat-samsung directory and this help to keep it more easily. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: S5P: Make the sleep code common for S5P series SoCsAbhilash Kesavan3-0/+56
The sleep code for S5PV210 and EXYNOS4 are identical; moreover S5p64X0 and S5PC100 for which support will be added soon can use the same procedure. Create a common sleep code in the plat-s5p directory so that it can be re-used. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: S5P: Make the common S5P PM code conditionally compileAbhilash Kesavan2-2/+7
Pave the way for adding PM support on S5P64X0, which is more similar to the S3C64XX series than the S5P series. Hence, the common pm code (containing dummy functions) should not be used for S5P64X0. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04Merge branch 'next-samsung-board-2' into next-samsung-devel-2Kukjin Kim1-0/+9
2011-10-04Merge branch 'next-samsung-cleanup-2' into next-samsung-devel-2Kukjin Kim18-933/+0
Conflicts: arch/arm/plat-s5p/include/plat/pll.h
2011-10-04Merge branch 'next-samsung-devel' into next-samsung-devel-2Kukjin Kim6-10/+186
Conflicts: arch/arm/mach-exynos4/clock.c arch/arm/mach-s3c2412/gpio.c arch/arm/mach-s5p64x0/dma.c arch/arm/mach-s5p64x0/gpiolib.c
2011-10-04Merge branch 'next-samsung-board' into next-samsung-devel-2Kukjin Kim3-18/+79
2011-10-04Merge branch 'next-samsung-cleanup' into next-samsung-devel-2Kukjin Kim2-62/+0
2011-10-04ARM: SAMSUNG: Move S5P header files to plat-samsungKukjin Kim12-547/+0
This patch moves header files from plat-s5p to plat-samsung to remove plat-s5p directory to make one plat-samsung directory for Samsung SoCs. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: SAMSUNG: Moving each SoC support header filesKukjin Kim5-172/+0
This patch moves SoC header files for supporting each SoCs to plat-samsung directory. This is required to make one plat- directory for Samsung SoCs. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: SAMSUNG: Consolidate plat/pll.hKukjin Kim1-152/+0
Removed - arch/arm/plat-s3c24xx/include/plat/pll.h - arch/arm/mach-s3c64xx/include/mach/pll.h - arch/arm/plat-s5p/include/plat/pll.h - arch/arm/plat-samsung/include/plat/pll6553x.h And created - arch/arm/plat-samsung/include/plat/pll.h Cc: Ben Dooks <ben-linux@fluff.org> [kgene.kim@samsung.com: changed title] [kgene.kim@samsung.com: fixed conflicts in plat-s5p/include/pll.h] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: S5P: add support for tv deviceTomasz Stanislawski4-2/+116
This patch adds all the resources for TV drivers and devices for Samsung Exynos4 and S5PV210 platforms. Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [m.szyprowski: squashed Exynos4 and S5PV210 patches and rewrote commit message] Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: SAMSUNG: add i2c hdmiphy controller definitionsTomasz Stanislawski3-0/+65
This patch adds hdmiphy dedicated i2c controller definitions. Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [m.szyprowski: renamed to i2c-hdmiphy and squashed Exynos4 and S5PV210 patches] Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04Merge branch 'next/topic-gpio-samsung' into next-samsung-develKukjin Kim2-8/+5
2011-10-04ARM: EXYNOS4: Add support new EXYNOS4412 SoCChanghwan Youn1-0/+9
This patch adds Samsung EXYNOS4412 SoC support. The EXYNOS4412 integrates a ARM Cortex A9 quad-core. Signed-off-by: Changhwan Youn <chaos.youn@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-09-26ARM: S5P: fix incorrect loop iterator usage on gpio-interruptMarek Szyprowski1-4/+5
Loop iterator value after terminating list_for_each_entry() is not NULL. This patch fixes incorrect iterator usage in GPIO interrupt code for SAMSUNG S5P platforms. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-09-21ARM: SAMSUNG: Remove useless Samsung GPIO related CONFIGsKukjin Kim1-3/+0
Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-09-21ARM: SAMSUNG: Update the name of regarding Samsung GPIOKukjin Kim1-5/+5
According to gpio-samsung.c, this patch updates the name of regarding Samsung GPIO. Basically the samsung_xxx prefix is used in gpio-samsung.c instead of s3c_xxx, because unified name can reduce its complexity. Note: some s3c_xxx stil remains because it is used widely. It will be updated next time. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-09-17Merge branch 'next/topic-plat-samsung-1' into next-samsung-cleanupKukjin Kim1-61/+0
2011-09-16ARM: SAMSUNG: Move map header file into plat-samsungKukjin Kim1-61/+0
This is required to work consolidation Samsung platform. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-07 15:25:57 +0000