summaryrefslogtreecommitdiffstats
path: root/arch/arm/mm/proc-v6.S
AgeCommit message (Collapse)AuthorFilesLines
2012-07-09ARM: 7445/1: mm: update CONTEXTIDR register to contain PID of current processWill Deacon1-0/+6
This patch introduces a new Kconfig option which, when enabled, causes the kernel to write the PID of the current task into the PROCID field of the CONTEXTIDR on context switch. This is useful when analysing hardware trace, since writes to this register can be configured to emit an event into the trace stream. The thread notifier for writing the PID is deliberately kept separate from the ASID-writing code so that we can support newer processors using LPAE, where the ASID is stored in TTBR0. As such, the switch_mm code is updated to perform a read-modify-write sequence to ensure that we don't clobber the PID on CPUs using the classic 2-level page tables. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-06ARM: proc-*.S: place cpu_reset functions into .idmap.text sectionWill Deacon1-0/+3
The CPU reset functions disable the MMU and therefore must be executed with an identity mapping in place. This patch places the CPU reset functions into the .idmap.text section, causing the idmap code to include them as part of the identity mapping. Acked-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-09-20ARM: pm: no need to save/restore context ID registerRussell King1-17/+16
There is no need to save and restore the context ID register on ARMv6 and ARMv7 with a temporary page table as we write the context ID register when we switch back to the real page tables for the thread. Moreover, the temporary page tables do not contain any non-global mappings, so the context ID value should not be used. To be safe, initialize the register to a reserved context ID value. Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-20ARM: pm: only use preallocated page table during resumeRussell King1-15/+16
Only use the preallocated page table during the resume, not while suspending. This avoids the overhead of having to switch unnecessarily to the resume page table in the suspend path. Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-20ARM: pm: preallocate a page table for suspend/resumeRussell King1-6/+0
Preallocate a page table and setup an identity mapping for the MMU enable code. This means we don't have to "borrow" a page table to do this, avoiding complexities with L2 cache coherency. Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-15ARM: 7015/1: ARM errata: Possible cache data corruption with hit-under-miss ↵Catalin Marinas1-0/+16
enabled This patch is a workaround for the 364296 ARM1136 r0p2 erratum (possible cache data corruption with hit-under-miss enabled). It sets the undocumented bit 31 in the auxiliary control register and the FI bit in the control register, thus disabling hit-under-miss without putting the processor into full low interrupt latency mode. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-21ARM: Fix build errors caused by adding generic macrosRussell King1-3/+0
Commit 66a625a (ARM: mm: proc-macros: Add generic proc/cache/tlb struct definition macros) introduced build errors when PM_SLEEP is not enabled. The per-CPU do_suspend/do_resume functions are defined via the preprocessor to constant 0. However, the macros which use these were converted to assembly, resulting in undefined references to these functions. Fix that by moving the ! ifdef section into proc-macros.S and deleting it from all effected proc-*.S files. Acked-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-07ARM: proc: add definition of cpu_reset for ARMv6 and ARMv7 coresWill Deacon1-0/+5
This patch adds simple definitions of cpu_reset for ARMv6 and ARMv7 cores, which disable the MMU via the SCTLR. Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-07-07ARM: mm: proc-v6: Use the new processor struct macrosDave Martin1-29/+5
Signed-off-by: Dave Martin <dave.martin@linaro.org>
2011-05-26ARM: 6942/1: mm: make TTBR1 always point to swapper_pg_dir on ARMv6/7Catalin Marinas1-1/+3
This patch makes TTBR1 point to swapper_pg_dir so that global, kernel mappings can be used exclusively on v6 and v7 cores where they are needed. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-03ARM: PJ4: remove the ARMv6 compatible cache method entriesNicolas Pitre1-34/+0
The Marvell PJ4 is ARMv7 capable, so we don't support it in ARMv6 mode anymore. Signed-off-by: Nicolas Pitre <nico@fluxnic.net> Acked-by: Saeed Bishara <saeed.bishara@gmail.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2011-04-13Merge branch 'fix' of ↵Russell King1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into fixes
2011-04-02ARM: Make consolidated PM sleep code depend on PM_SLEEPRussell King1-1/+1
CONFIG_PM is now set whenever we support either runtime PM in addition to suspend and hibernate. This causes build errors when runtime PM is enabled on a platform, but the CPU does not have the appropriate support for suspend. So, switch this code to use CONFIG_PM_SLEEP rather than CONFIG_PM to allow runtime PM to be enabled without causing build errors. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-03-31Fix common misspellingsLucas De Marchi1-2/+2
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-02-22ARM: pm: add generic CPU suspend/resume supportRussell King1-0/+50
This adds core support for saving and restoring CPU coprocessor registers for suspend/resume support. This contains support for suspend with ARM920, ARM926, SA11x0, PXA25x, PXA27x, PXA3xx, V6 and V7 CPUs. Tested on Assabet and Tegra 2. Tested-by: Colin Cross <ccross@android.com> Tested-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-18Merge branch 'hotplug' into develRussell King1-1/+5
Conflicts: arch/arm/kernel/head-common.S
2010-10-08ARM: hotplug cpu: Keep processor information, startup code & ↵Russell King1-1/+5
__lookup_processor_type When hotplug CPU is enabled, we need to keep the list of supported CPUs, their setup functions, and __lookup_processor_type in place so that we can find and initialize secondary CPUs. Move these into the __CPUINIT section. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-04ARM: Allow SMP kernels to boot on UP systemsRussell King1-15/+28
UP systems do not implement all the instructions that SMP systems have, so in order to boot a SMP kernel on a UP system, we need to rewrite parts of the kernel. Do this using an 'alternatives' scheme, where the kernel code and data is modified prior to initialization to replace the SMP instructions, thereby rendering the problematical code ineffectual. We use the linker to generate a list of 32-bit word locations and their replacement values, and run through these replacements when we detect a UP system. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: Factor out common code from cpu_proc_fin()Russell King1-4/+1
All implementations of cpu_proc_fin() start by disabling interrupts and then flush caches. Rather than have every processors proc_fin() implementation do this, move it out into generic code - and move the cache flush past setup_mm_for_reboot() (so it can benefit from having caches still enabled.) This allows cpu_proc_fin() to become independent of the L1/L2 cache types, and eventually move the L2 cache flushing into the L2 support code. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-09ARM: 6207/1: Replace CONFIG_HAS_TLS_REG with HWCAP_TLS and check for it on V6Tony Lindgren1-2/+3
The TLS register is only available on ARM1136 r1p0 and later. Set HWCAP_TLS flags if hardware TLS is available and test for it if CONFIG_CPU_32v6K is not set for V6. Note that we set the TLS instruction in __kuser_get_tls dynamically as suggested by Jamie Lokier <jamie@shareable.org>. Also the __switch_to code is optimized out in most cases as suggested by Nicolas Pitre <nico@fluxnic.net>. Reviewed-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-19ARM: 5888/1: arm: Update comments in cacheflush.h and remove unnecessary V6 ↵Tony Lindgren1-2/+0
and V7 comments The comments in cacheflush.h should follow what's in struct cpu_cache_fns. The comments for V6 and V7 are unnecessary. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-07ARM: dove: fix the mm mmu flags of the pj4 procinfoSaeed Bishara1-3/+2
... to be the same as proc-v6 Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-11-27ARM: add base support for Marvell Dove SoCSaeed Bishara1-1/+32
The Marvell Dove (88AP510) is a high-performance, highly integrated, low power SoC with high-end ARM-compatible processor (known as PJ4), graphics processing unit, high-definition video decoding acceleration hardware, and a broad range of peripherals. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-11-02ARM: ensure initial page tables are setup for SMP systemsRussell King1-3/+4
Mapping the same memory using two different attributes (memory type, shareability, cacheability) is unpredictable. During boot, we encounter a situation when we're updating the kernel's page tables which can lead to dirty cache lines existing in the cache which are subsequently missed. This causes stack corruption, and therefore a crash. Therefore, ensure that the shared and cacheability settings matches the configuration that will be used later; this together with the restriction in early_cachepolicy() ensures that we won't create a mismatch during boot. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-02ARM: 5727/1: Pass IFSR register to do_PrefetchAbort()Kirill A. Shutemov1-1/+1
Instruction fault status register, IFSR, was introduced on ARMv6 to provide status information about the last insturction fault. It needed for proper prefetch abort handling. Now we have three prefetch abort model: * legacy - for CPUs before ARMv6. They doesn't provide neither IFSR nor IFAR. We simulate IFSR with section translation fault status for them to generalize code; * ARMv6 - provides IFSR, but not IFAR; * ARMv7 - provides both IFSR and IFAR. Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-30Add core support for ARMv6/v7 big-endianCatalin Marinas1-0/+3
Starting with ARMv6, the CPUs support the BE-8 variant of big-endian (byte-invariant). This patch adds the core support: - setting of the BE-8 mode via the CPSR.E register for both kernel and user threads - big-endian page table walking - REV used to rotate instructions read from memory during fault processing as they are still little-endian format - Kconfig and Makefile support for BE-8. The --be8 option must be passed to the final linking stage to convert the instructions to little-endian Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-04-27arm: Use __INIT macro instead of .text.init.Tim Abbott1-1/+2
arm is placing some code in the .text.init section, but it does not reference that section in its linker scripts. This change moves this code from the .text.init section to the .init.text section, which is presumably where it belongs. Signed-off-by: Tim Abbott <tabbott@mit.edu> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-10Modern processors may need to drain the WB before WFICatalin Marinas1-0/+2
Since WFI may cause the processor to enter a low-power mode, data may still be in the write buffer. This patch adds a DSB (or DWB) to the cpu_(v6|v7)_do_idle functions before the WFI. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-10-01[ARM] Don't include asm/elf.h in asm codeRussell King1-1/+1
asm code really wants asm/hwcap.h, so include that instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-01[ARM] Convert ARMv6 and ARMv7 to use new memory typesRussell King1-1/+3
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-01[ARM] Convert set_pte_ext implementions to macrosRussell King1-37/+1
There are actually only four separate implementations of set_pte_ext. Use assembler macros to insert code for these into the proc-*.S files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-24[ARM] fix 48d7927bdf071d05cf5d15b816cf06b0937cb84fCatalin Marinas1-1/+1
The proc-*.S files have the _prefetch_abort pointer placed at the end of the processor structure but the cpu-multi32.h defines it in the second position. The patch also fixes the support for XSC3 and the MMU-less CPUs (740, 7tdmi, 940, 946 and 9tdmi). Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-18RealView: Move the SCU initialisation out of __v6_setupCatalin Marinas1-14/+0
This patch moves the SCU initialisation from __v6_setup to the smp_prepare_cpus() function as it relies on platform-specific settings. Changes to get_core_count() are mainly for allowing cleaner code with the upcoming PB11MPCore patches. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-04-18Add a prefetch abort handlerPaul Brook1-0/+1
This patch adds a prefetch abort handler similar to the data abort one and renames the latter for consistency. Initial implementation by Paul Brook with some renaming by Catalin Marinas. Signed-off-by: Paul Brook <paul@codesourcery.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2007-02-15Merge Realview GIC codeRussell King1-3/+5
2007-02-15[ARM] 4109/2: Add support for the RealView/EB MPCore revC platformCatalin Marinas1-3/+5
The kernel originally supported revB only. This patch enables revC by default and adds a config option for building the kernel for the revB platform. Since the SCU base address was hard-coded in the proc-v6.S file (and only valid for RealView/EB revB), this patch also adds a more generic support for defining the SCU information. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-08[ARM] Always mark ARMv6 PTWs outer cacheableRussell King1-6/+8
Other platforms other than SMP may have an outer cache. For these, we also need to mark the page table walks outer cacheable. Since marking the walks always outer cacheable apparantly has no side effects, we might as well always mark them so. However, we continue to only mark PTWs shared if we have SMP enabled. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-13[ARM] Unuse another Linux PTE bitRussell King1-14/+16
L_PTE_ASID is not really required to be stored in every PTE, since we can identify it via the address passed to set_pte_at(). So, create set_pte_ext() which takes the address of the PTE to set, the Linux PTE value, and the additional CPU PTE bits which aren't encoded in the Linux PTE value. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-08[ARM] Formalise the ARMv6 processor name stringRussell King1-1/+1
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-08[ARM] Handle HWCAP_VFP in VFP support codeRussell King1-6/+1
Don't set HWCAP_VFP in the processor support file; not only does it depend on the processor features, but it also depends on the support code being present. Therefore, only set it if the support code detects that we have a VFP coprocessor attached. Also, move the VFP handling of the coprocessor access register into the VFP support code. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-30[ARM] Include asm/elf.h instead of asm/procinfo.hRussell King1-1/+1
These files want to provide/access ELF hwcap information, so should be including asm/elf.h rather than asm/procinfo.h Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-01Merge nommu branchRussell King1-9/+6
2006-06-29[ARM] Set bit 4 on section mappings correctly depending on CPURussell King1-0/+4
On some CPUs, bit 4 of section mappings means "update the cache when written to". On others, this bit is required to be one, and others it's required to be zero. Finally, on ARMv6 and above, setting it turns on "no execute" and prevents speculative prefetches. With all these combinations, no one value fits all CPUs, so we have to pick a value depending on the CPU type, and the area we're mapping. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29[ARM] nommu: provide a way for correct control register value selectionRussell King1-9/+6
Most MMU-based CPUs have a restriction on the setting of the data cache enable and mmu enable bits in the control register, whereby if the data cache is enabled, the MMU must also be enabled. Enabling the data cache without the MMU is an invalid combination. However, there are CPUs where the data cache can be enabled without the MMU. In order to allow these CPUs to take advantage of that, provide a method whereby each proc-*.S file defines the control regsiter value for use with nommu (with the MMU disabled.) Later on, when we add support for enabling the MMU on these devices, we can adjust the "crval" macro to also enable the data cache for nommu. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-28[ARM] nommu: Initial uCLinux support for MMU-based CPUsHyok S. Choi1-0/+7
In noMMU mode, various of functions which are defined in mm/proc-*.S is not valid or needed to be avoided. i.g. switch_mm is not needed, just returns and this makes the I & D caches are valid which shows great improvement of performance including task switching and IPC. Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-25[ARM] Remove partial non-v6 binutils compatibilityRussell King1-32/+0
proc-v6 contains some compatibility to be able to use the V6 "cps" instruction. However, the kernel makes use of this instruction elsewhere extensively, so there's no point keeping this compatibility anymore. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-27[ARM] proc-v6: mark page table walks outer-cacheable, shared. Enable NX.Russell King1-4/+12
Mark page table walks with outer-cacheable attribute, and enable no-execute in page tables. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] nommu: Move hardware page table definitions to pgtable-hwdef.hRussell King1-0/+1
Move the hardware PMD and PTE page table definitions from pgtable.h into pgtable-hwdef.h, and include pgtable-hwdef.h as necessary. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-07[ARM SMP] Add Realview MPcore SMP supportRussell King1-0/+18
Add SMP support for the MPcore tile fitted to the Realview ARM platform. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-07[ARM SMP] Add support for shared memory attributeRussell King1-1/+7
We need to set the shared memory attribute in the page tables on SMP systems to allow the cache coherency to operate. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 18:40:39 +0000