summaryrefslogtreecommitdiffstats
path: root/arch/arm/mm/cache-l2x0.c
AgeCommit message (Collapse)AuthorFilesLines
2010-07-29ARM: 6272/1: Convert L2x0 to use the IO relaxed operationsCatalin Marinas1-13/+13
This patch is in preparation for a subsequent patch which adds barriers to the I/O accessors. Since the mandatory barriers may do an L2 cache sync, this patch avoids a recursive call into l2x0_cache_sync() via the write*() accessors and wmb() and a call into l2x0_cache_sync() with the l2x0_lock held. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-09ARM: 6210/1: Do not rely on reset defaults of L2X0_AUX_CTRLSascha Hauer1-2/+3
On i.MX35 the L2X0_AUX_CTRL register does not have sensible reset default values. Allow them to be overwritten with the aux_val/aux_mask arguments passed to l2x0_init(). Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-17Merge branch 'devel-stable' into develRussell King1-0/+10
Conflicts: arch/arm/Kconfig arch/arm/include/asm/system.h arch/arm/mm/Kconfig
2010-05-15ARM: 6094/1: Extend cache-l2x0 to support the 16-way PL310Jason McMullan1-5/+34
The L310 cache controller's interface is almost identical to the L210. One major difference is that the PL310 can have up to 16 ways. This change uses the cache's part ID and the Associativity bits in the AUX_CTRL register to determine the number of ways. Also, this version prints out the CACHE_ID and AUX_CTRL registers. Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Jason S. McMullan <jason.mcmullan@netronome.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-25ARM: 5995/1: ARM: Add L2x0 outer_sync() support (3/4)Catalin Marinas1-0/+10
The L2x0 cache controllers need to explicitly drain their write buffer even for Normal Noncacheable memory accesses. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15ARM: 5919/1: ARM: L2 : Errata 588369: Clean & Invalidate do not invalidate ↵Santosh Shilimkar1-0/+36
clean lines This patch implements the work-around for the errata 588369.The secure API is used to alter L2 debug register because of trust-zone. This version updated with comments from Russell and Catalin and generated against 2.6.33-rc6 mainline kernel. Detail comments can be found: http://www.spinics.net/lists/linux-omap/msg23431.html Signed-off-by: Woodruff Richard <r-woodruff2@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15ARM: 5916/1: ARM: L2 : Add maintainace by line helper functionsSantosh Shilimkar1-10/+26
This patch adds the cache maintainance by line helper functions. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-14Merge branch 'pending-l2x0' into cacheRussell King1-21/+72
2009-12-14ARM: cache-l2x0: make better use of background cache handlingRussell King1-11/+23
There's no point having the hardware support background operations if we issue a cache operation, and then wait for it to complete before calculating the address of the next operation. We gain no advantage in the cache controller stalling the bus until completion. What we should be doing is using the 'wait' time productively by calculating the address of the next operation, and only then waiting for the previous operation to complete. This means that cache operations can occur in parallel with the CPU calculating the next address. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2009-12-14ARM: cache-l2x0: avoid taking spinlock for every iterationRussell King1-13/+52
Taking the spinlock for every iteration is very expensive; instead, batch iterations up into 4K blocks, releasing and reacquiring the spinlock between each block. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2009-12-03ARM: 5845/1: l2x0: check whether l2x0 already enabledSrinidhi Kasagar1-9/+16
If running in non-secure mode accessing some registers of l2x0 will fault. So check if l2x0 is already enabled, if so do not access those secure registers. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-06[ARM] Convert asm/io.h to linux/io.hRussell King1-1/+1
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-09-17[ARM] 4568/1: fix l2x0 cache invalidate handling of unaligned addressesRui Sousa1-1/+11
The l2x0_inv_range() function doesn't handle unaligned addresses correctly. It's necessary to clean the cache lines that are at the start and end of the invalidate range, if the addresses are not aligned, to prevent corruption of other data sharing the same cache line. Signed-off-by: Rui Sousa <rui.p.m.sousa@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-20[ARM] 4500/1: Add locking around the background L2x0 cache operationsCatalin Marinas1-0/+6
The background operations of the L2x0 cache controllers are aborted if another operation is issued on the same or different core. This patch protects the maintenance operation issuing/polling with a spinlock. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-11[ARM] 4135/1: Add support for the L210/L220 cache controllersCatalin Marinas1-0/+104
This patch adds the support for the L210/L220 (outer) cache controller. The cache range operations are done by index/way since L2 cache controller only accepts physical addresses. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-12 11:48:39 +0000