summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-zynq/include
AgeCommit message (Collapse)AuthorFilesLines
2012-11-21ARM: zynq: Remove all unused mach headersMichal Simek3-62/+0
Remove empty unused mach/hardware.h. mach/irqs.h is unused because SPARSE_IRQ are ON by default. mach/timex.h is unused because of CONFIG_ARCH_MULTIPLATFORM. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Josh Cartwright <josh.cartwright@ni.com>
2012-11-21ARM: zynq: add support for ARCH_MULTIPLATFORMJosh Cartwright3-125/+0
The majority of changes are necessary to remove dependencies on header files within arch/arm/mach-zynq/include/mach: uncompress.h - Deleted. It is unused for ARCH_MULTIPLATFORM builds. uart.h: - Move uart definitions out of uart.h into debug/zynq.S, which is now the only user zynq_soc.h: - Move SCU address definitions into common.c. - Other #defines, such as PERIPHERAL_CLOCK_RATE, TTC0_BASE, etc, are unused and can be dropped Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Tested-by: Michal Simek <michal.simek@xilinx.com>
2012-11-21ARM: zynq: make use of debug_ll_io_init()Josh Cartwright1-36/+0
Convert low-level debugging routines to make use of debug_ll_io_init(). This is part of the preparation for ARCH_MULTIPLATFORM support for Zynq. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Tested-by: Michal Simek <michal.simek@xilinx.com>
2012-11-21ARM: zynq: remove TTC early mappingJosh Cartwright1-5/+1
Now that the TTC driver has proper support for DT bindings, it is not necessary for the registers to be mapped early. They will be mapped during clock initialization using of_iomap(). Remove the early mapping. In addition, remove the extraneous zynq_soc.h include from the timer driver. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Tested-by: Michal Simek <michal.simek@xilinx.com>
2012-11-07ARM: zynq: Allow UART1 to be used as DEBUG_LL console.Nick Bowler1-5/+11
The main UART on the Xilinx ZC702 board is UART1, located at address e0001000. Add a Kconfig option to select this device as the low-level debugging port. This allows the really early boot printouts to reach the USB serial adaptor on this board. For consistency's sake, add a choice entry for UART0 even though it is the the default if UART1 is not selected. Signed-off-by: Nick Bowler <nbowler@elliptictech.com> Tested-by: Josh Cartwright <josh.cartwright@ni.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
2012-10-29zynq: move static peripheral mappingsJosh Cartwright1-10/+15
Shifting them up into the vmalloc region prevents the following warning, when booting a zynq qemu target with more than 512mb of RAM: BUG: mapping for 0xe0000000 at 0xe0000000 out of vmalloc space In addition, it allows for reuse of these mappings when the proper drivers issue requests via ioremap(). There are currently unknown issues with the early uart mapping. For now, the uart will be mapped to a known working address. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Cc: John Linn <john.linn@xilinx.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Michal Simek <michal.simek@xilinx.com>
2012-10-29zynq: remove use of CLKDEV_LOOKUPJosh Cartwright1-32/+0
The Zynq support in mainline does not (yet) make use of any of the generic clk or clk lookup functionality. Remove what is upstream for now, until the out-of-tree implementation is in suitable form for merging. An important side effect of this patch is that it allows the building of a Zynq kernel without running into unresolved symbol problems: drivers/built-in.o: In function `amba_get_enable_pclk': clkdev.c:(.text+0x444): undefined reference to `clk_enable' drivers/built-in.o: In function `amba_remove': clkdev.c:(.text+0x488): undefined reference to `clk_disable' drivers/built-in.o: In function `amba_probe': clkdev.c:(.text+0x540): undefined reference to `clk_disable' drivers/built-in.o: In function `amba_device_add': clkdev.c:(.text+0x77c): undefined reference to `clk_disable' drivers/built-in.o: In function `enable_clock': clkdev.c:(.text+0x29738): undefined reference to `clk_enable' drivers/built-in.o: In function `disable_clock': clkdev.c:(.text+0x29778): undefined reference to `clk_disable' drivers/built-in.o: In function `__pm_clk_remove': clkdev.c:(.text+0x297f8): undefined reference to `clk_disable' drivers/built-in.o: In function `pm_clk_suspend': clkdev.c:(.text+0x29bc8): undefined reference to `clk_disable' drivers/built-in.o: In function `pm_clk_resume': clkdev.c:(.text+0x29c28): undefined reference to `clk_enable' make[2]: *** [vmlinux] Error 1 make[1]: *** [sub-make] Error 2 make: *** [all] Error 2 In addition, eliminate Zynq's "use" of the versatile platform, as it is no longer needed. As Nick Bowler points out: For the record, I think this was introduced by commit 56a34b03ff427 ("ARM: versatile: Make plat-versatile clock optional") which forgot to select PLAT_VERSATILE_CLOCK on Zynq. This is not all that surprising, because the fact that Zynq "uses" PLAT_VERSATILE is secretly hidden in the Makefile. Nevertheless, the only feature from versatile that Zynq needed was the clock support, so this patch should *also* delete the secret use of plat-versatile by removing this line from arch/arm/Makefile: plat-$(CONFIG_ARCH_ZYNQ) += versatile Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Cc: John Linn <john.linn@xilinx.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Michal Simek <michal.simek@xilinx.com>
2012-10-29zynq: use pl310 device tree bindingsJosh Cartwright1-4/+0
The Zynq has a PL310 L2 cache controller. Convert in-tree uses to using the device tree. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Cc: John Linn <john.linn@xilinx.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Michal Simek <michal.simek@xilinx.com>
2012-10-29zynq: use GIC device tree bindingsJosh Cartwright1-2/+0
The Zynq uses the cortex-a9-gic. This eliminates the need to hardcode register addresses. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Cc: John Linn <john.linn@xilinx.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Michal Simek <michal.simek@xilinx.com>
2012-03-06ARM: remove bunch of now unused mach/io.h filesRob Herring1-33/+0
Now that many platforms don't need mach/io.h, remove the unused ones. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org>
2012-02-22Merge branch 'entry-macro-cleanup' of git://sources.calxeda.com/kernel/linux ↵Russell King1-27/+0
into for-armsoc
2012-02-21ARM: remove disable_fiq and arch_ret_to_user macrosRob Herring1-27/+0
Now that most platforms don't need disable_fiq and arch_ret_to_user macros, we can remove the empty macros or empty entry-macro.S files. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Ryan Mallon <rmallon@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Shawn Guo <shawn.guo@linaro.org>
2012-01-20ARM: big removal of now unused arch_idle()Nicolas Pitre1-23/+0
When this is the only content remaining in mach/system.h then the whole file is removed. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-and-tested-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: David Brown <davidb@codeaurora.org> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2012-01-05Merge branch 'restart' into for-linusRussell King1-5/+0
Conflicts: arch/arm/mach-exynos/cpu.c The changes to arch/arm/mach-exynos/cpu.c were moved to mach-exynos/common.c.
2012-01-05ARM: restart: remove the now empty arch_reset()Russell King1-4/+0
Remove the now empty arch_reset() from all the mach/system.h includes, and remove its callsite. Remove arm_machine_restart() as this function no longer does anything useful. For samsung platforms, remove the include of mach/system-reset.h and plat/system-reset.h from their respective mach/system.h headers as these just define their arch_reset functions. As a result, the s3c2410 and plat-samsung system-reset.h files are no longer referenced, so remove these files entirely. Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: remove comments about adding code to arch_reset()Russell King1-1/+0
arch_reset() is deprecated; systems should hook into system restart via the 'restart' method in the platforms machine description record. Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-05Merge branch 'vmalloc' of git://git.linaro.org/people/nico/linux into ↵Russell King1-20/+0
devel-stable
2011-11-26ARM: big removal of now unused vmalloc.h filesNicolas Pitre1-20/+0
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-11-15ARM: zynq: convert to CONFIG_MULTI_IRQ_HANDLERMarc Zyngier1-3/+0
Convert the zynq platform to be using the gic_handle_irq function as its primary interrupt handler. Acked-by: John Linn <john.linn@xilinx.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2011-10-13ARM: mach-zynq: remove mach/memory.hNicolas Pitre1-22/+0
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-09-26ARM: add an extra temp register to the low level debugging addruart macroNicolas Pitre1-1/+1
Some platforms (like OMAP not to name it) are doing rather complicated hacks just to determine the base UART address to use. Let's give their addruart macro some slack by providing an extra work register which will allow for much needed cleanups. This is basically a no-op as this commit is only adding the extra argument to the macro but no one is using it yet. Signed-off-by: nicolas Pitre <nicolas.pitre@linaro.org> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-06-20ARM: Xilinx: Adding Xilinx board supportJohn Linn13-0/+387
The 1st board support is minimal to get a system up and running on the Xilinx platform. This platform reuses the clock implementation from plat-versatile, and it depends entirely on CONFIG_OF support. There is only one board support file which obtains all device information from a device tree dtb file which is passed to the kernel at boot time. Signed-off-by: John Linn <john.linn@xilinx.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-02 10:51:31 +0000