summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-ux500
AgeCommit message (Collapse)AuthorFilesLines
2019-11-11mfd: db8500-prcmu: Support U8420-sysclk firmwareLinus Walleij1-1/+1
There is a distinct version of the Ux500 U8420 variant with "sysclk", as can be seen from the vendor code that didn't make it upstream, this firmware lacks the ULPPLL (ultra-low power phase locked loop) which in effect means that the timer clock is instead wired to the 32768 Hz always-on clock. This has some repercussions when enabling the timer clock as the code as it stands will disable the timer clock on these platforms (lacking the so-called "doze mode") and obtaining the wrong rate of the timer clock. The timer frequency is of course needed very early in the boot, and as a consequence, we need to shuffle around the early PRCMU init code: whereas in the past we did not need to look up the PRCMU firmware version in the early init, but now we need to know the version before the core system timers are registered so we restructure the platform callbacks to the PRCMU so as not to take any arguments and instead look up the resources it needs directly from the device tree when initializing. As we do not yet support any platforms using this firmware it is not a regression, but as PostmarketOS is starting to support products with this firmware we need to fix this up. The low rate of 32kHz also makes the MTU timer unsuitable as delay timer but this needs to be fixed in a separate patch. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-07-23ARM: ux500: Stop populating the PRCMU devices earlyLinus Walleij1-1/+0
The PRCMU devices are getting populated from the MFD driver and that is enough for them to come up. We already have an early quirk for the things that need to happen really early and the PRCMU timer that need to be registered really early will find its own node just fine as the timer/clocksource subsystem looks through the whole device tree for compatible nodes. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner2-9/+2
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 194Thomas Gleixner4-7/+4
Based on 1 normalized pattern(s): license terms gnu general public license gpl version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 161 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528170027.447718015@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-04ARM: ux500: Cut down Kconfig optionsLinus Walleij1-39/+11
These systems are not plentiful and do not have any strict memory constraints. Cut down the configurability and select what is needed for all of them so they simply boot, keeping only the UX500_SOC_DB8500 symbol which is used elsewhere in the kernel for now, but default it to y. Cc: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-04ARM: ux500: Drop U8540/9540 supportLinus Walleij3-21/+2
The U8540 was an evolved version of the U8500, but it was never mass produced or put into products, only reference designs exist. The upstream support was never completed and it is unlikely that this will happen so drop the support for now to simplify maintenance of the U8500. Cc: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-07ARM: ux500: Fix PMU IRQ regressionLinus Walleij1-0/+3
Commit 2b05f6ae1ee5 ("ARM: ux500: remove PMU IRQ bouncer") deleted some code to bounce and work around the weird PMU IRQs in the DB8500 ASIC, but did a semantic mistake: since the auxdata was now unused, the call to of_platform_populate() was removed, but this does not work: the default platform population will only kick in if .init_machine() is assigned NULL, and since the U8540 was still using the callback that was not the case. Fix this by reinstating the call to of_platform_populate(), but pass NULL as auxdata. Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Fixes: 2b05f6ae1ee5 ("ARM: ux500: remove PMU IRQ bouncer") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-02-20ARM: ux500: remove PMU IRQ bouncerMark Rutland1-35/+0
The ux500 PMU IRQ bouncer is getting in the way of some fundametnal changes to the ARM PMU driver, and it's the only special case that exists today. Let's remove it. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-19ARM: ux500: Fix regression while init PM domainsUlf Hansson2-4/+4
The commit afece3ab9a36 ("PM / Domains: Add time accounting to various genpd states") causes a boot regression for ux500. The problem occurs when the ux500 machine code calls pm_genpd_init(), which since the above change triggers a call to ktime_get(). More precisely, because ux500 initializes PM domains in the init_IRQ() phase of the boot, timekeeping has not yet been initialized. Fix the problem by moving the initialization of the PM domains to after timekeeping has been initialized. Fixes: afece3ab9a36 ("PM / Domains: Add time accounting to various genpd..") Cc: Thara Gopinath <thara.gopinath@linaro.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-07-27drivers/perf: arm_pmu: Request PMU SPIs with IRQF_PER_CPUWill Deacon1-0/+1
Since the PMU register interface is banked per CPU, CPU PMU interrrupts cannot be handled by a CPU other than the one with the PMU asserting the interrupt. This means that migrating PMU SPIs, as we do during a CPU hotplug operation doesn't make any sense and can lead to the IRQ being disabled entirely if we route a spurious IRQ to the new affinity target. This has been observed in practice on AMD Seattle, where CPUs on the non-boot cluster appear to take a spurious PMU IRQ when coming online, which is routed to CPU0 where it cannot be handled. This patch passes IRQF_PERCPU for PMU SPIs and forcefully sets their affinity prior to requesting them, ensuring that they cannot be migrated during hotplug events. This interacts badly with the DB8500 erratum workaround that ping-pongs the interrupt affinity from the handler, so we avoid passing IRQF_PERCPU in that case by allowing the IRQ flags to be overridden in the platdata. Fixes: 3cf7ee98b848 ("drivers/perf: arm_pmu: move irq request/free into probe") Cc: Mark Rutland <mark.rutland@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-03-03Merge tag 'armsoc-late' of ↵Linus Torvalds5-60/+7
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late DT updates from Arnd Bergmann: "These updates have been kept in a separate branch mostly because they rely on updates to the respective clk drivers to keep the shared header files in sync. This includes two branches for arm64 dt updates, both following up on earlier changes for the same platforms that are already merged: Samsung: - add USB3 support in Exynos7 - minor PM related updates Amlogic: - new machines: WeTek Set-top-boxes - various devices added to DT There are also a couple of bugfixes that trickled in since the start of the merge window: - The moxart_defconfig was not building the intended platform - CPU-hotplug was broken on ux500 - Coresight was broken on Juno (never worked)" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits) ARM: deconfig: fix the moxart defconfig ARM: ux500: resume the second core properly arm64: dts: juno: update definition for programmable replicator arm64: dts: exynos: Add regulators for Vbus and Vbus-Boost arm64: dts: exynos: Add USB 3.0 controller node for Exynos7 arm64: dts: exynos: Use macros for pinctrl configuration on Exynos7 pinctrl: dt-bindings: samsung: Add Exynos7 specific pinctrl macro definitions arm64: dts: exynos: Add initial configuration for DISP clocks for TM2/TM2e ARM64: dts: meson-gxbb-p200: add ADC laddered keys ARM64: dts: meson: meson-gx: add the SAR ADC ARM64: dts: meson-gxl: add the pwm_ao_b pin ARM64: dts: meson-gx: add the missing pwm_AO_ab node clk: gxbb: fix CLKID_ETH defined twice ARM64: dts: meson-gxl: rename Nexbox A95x for consistency clk: gxbb: add the SAR ADC clocks and expose them dt-bindings: amlogic: Add WeTek boards ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play dt-bindings: vendor-prefix: Add wetek vendor prefix ARM64: dts: meson-gxm: Rename q200 and q201 DT files for consistency ARM64: dts: meson-gx: Add HDMI HPD/DDC pinctrl nodes ...
2017-03-02ARM: ux500: resume the second core properlyLinus Walleij5-60/+7
The pen hold/release scheme was copied over to Ux500 from the ARM reference designs like most of these at the time. It is not needed at all, and was mostly removed in commit c00def71efd9 "ARM: ux500: simplify secondary CPU boot". However on the suspend/resume path and hot plug/unplug of CPUs, the .cpu_die() callback was still waiting for the pen to be released which made it spin forever and the second core never come back online after suspend/resume. Fix this by simply replacing the strange custom .cpu_die() with a oneline wfi() just like e.g. the qcom platform does. This fixes the issue and makes the second core come up properly after suspend/resume. As a side effect, this rids us of the completely surplus local setup.h and hotplug.c files, and we just compile this into platsmp.c with everything else SMP. Cc: stable@vger.kernel.org Fixes: c00def71efd9 ("ARM: ux500: simplify secondary CPU boot") Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-02-28Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds1-1/+1
Pull ARM updates from Russell King: - nommu updates from Afzal Mohammed cleaning up the vectors support - allow DMA memory "mapping" for nommu Benjamin Gaignard - fixing a correctness issue with R_ARM_PREL31 relocations in the module linker - add strlen() prototype for the decompressor - support for DEBUG_VIRTUAL from Florian Fainelli - adjusting memory bounds after memory reservations have been registered - unipher cache handling updates from Masahiro Yamada - initrd and Thumb Kconfig cleanups * 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (23 commits) ARM: mm: round the initrd reservation to page boundaries ARM: mm: clean up initrd initialisation ARM: mm: move initrd init code out of arm_memblock_init() ARM: 8655/1: improve NOMMU definition of pgprot_*() ARM: 8654/1: decompressor: add strlen prototype ARM: 8652/1: cache-uniphier: clean up active way setup code ARM: 8651/1: cache-uniphier: include <linux/errno.h> instead of <linux/types.h> ARM: 8650/1: module: handle negative R_ARM_PREL31 addends correctly ARM: 8649/2: nommu: remove Hivecs configuration is asm ARM: 8648/2: nommu: display vectors base ARM: 8647/2: nommu: dynamic exception base address setting ARM: 8646/1: mmu: decouple VECTORS_BASE from Kconfig ARM: 8644/1: Reduce "CPU: shutdown" message to debug level ARM: 8641/1: treewide: Replace uses of virt_to_phys with __pa_symbol ARM: 8640/1: Add support for CONFIG_DEBUG_VIRTUAL ARM: 8639/1: Define KERNEL_START and KERNEL_END ARM: 8638/1: mtd: lart: Rename partition defines to be prefixed with PART_ ARM: 8637/1: Adjust memory boundaries after reservations ARM: 8636/1: Cleanup sanity_check_meminfo ARM: add CPU_THUMB_CAPABLE to indicate possible Thumb support ...
2017-02-28ARM: 8641/1: treewide: Replace uses of virt_to_phys with __pa_symbolFlorian Fainelli1-1/+1
All low-level PM/SMP code using virt_to_phys() should actually use __pa_symbol() against kernel symbols. Update code where relevant to move away from virt_to_phys(). Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2017-02-23Merge tag 'armsoc-soc' of ↵Linus Torvalds6-223/+19
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "In the SoC branch we normally collect classic arch/arm/mach-* contents, i.e. C code changes for SoC platforms. This release cycle the diffstat is quite nice, in that we're removing 3x the amount of code that's being added. The main reason for this is that there's a removal of camera drivers for Freescale i.MX chips (driver was removed so the device registration isn't needed any more). There's also removal of display initialization code for OMAP that is no longer needed. The rest are mostly minor tweaks and cleanups; constification on Samsung platforms, cleanup of ux500 platform data, purge of other unused platform data/device seutp on i.MX and other good stuff. New SoC support this cycle is for two Allwinner platforms, H2+ and V3s" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (55 commits) ARM: ux500: remove deleted file from Makefile ARM: ep93xx: Disable TS-72xx watchdog before uncompressing ARM: ux500: cut some platform data MAINTAINERS: Update for the current location of the bcm2835 tree. ARM: davinci: remove BUG_ON() from da850_register_sata() ARM: davinci: da850: model the SATA refclk ARM: davinci: da850: add con_id for the SATA clock ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for SATA arm: mvebu: support for SMP on 98DX3336 SoC dt-bindings: video: exynos7-decon: Remove obsolete samsung,power-domain property soc: dove: constify reset_control_ops structures ARM: mv78xx0: fix possible PCI buffer overflow MAINTAINERS: transfer maintainership for the EZX platform ARM: shmobile: rcar-gen2: Add more register documentation ARM: tegra: paz00: Fix __initdata placement ARM: OMAP: clock: Remove unused mpurate cmdline option ARM: davinci: add skeleton for pdata-quirks arm: sunxi: add support for V3s SoC ARM: OMAP2+: omap_hwmod: Add support for earlycon arm: hisi: drop extern hip01_cpu_die ...
2017-02-07ARM: ux500: remove deleted file from MakefileOlof Johansson1-1/+0
Cleanup removed the file, but Makefile was overlooked. Purge there too. Fixes: 4b483ed0be8b ('ARM: ux500: cut some platform data') Signed-off-by: Olof Johansson <olof@lixom.net>
2017-02-07ARM: ux500: cut some platform dataLinus Walleij4-195/+0
This platform data is revoked: the drivers are getting the DMA configuration from the device tree, it has been done like that since the DMA support was merged and this data has not been used since. The remaining auxdata is also unused. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-01-12ARM: ux500: remove duplicated include from cpu-db8500.cWei Yongjun1-1/+0
Remove duplicated include. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-12ARM: ux500: simplify secondary bootLinus Walleij1-26/+19
Inline the wakeup_secondary() static function, and keep the backupram remapping around: it is reused when resuming from suspend so no point in remapping it every time. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-12ARM: ux500: fix prcmu_is_cpu_in_wfi() calculationArnd Bergmann1-2/+2
This function clearly never worked and always returns true, as pointed out by gcc-7: arch/arm/mach-ux500/pm.c: In function 'prcmu_is_cpu_in_wfi': arch/arm/mach-ux500/pm.c:137:212: error: ?: using integer constants in boolean context, the expression will always evaluate to 'true' [-Werror=int-in-bool-context] With the added braces, the condition actually makes sense. Fixes: 34fe6f107eab ("mfd : Check if the other db8500 core is in WFI") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-01Merge tag 'armsoc-drivers' of ↵Linus Torvalds10-1632/+90
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs. A slew of changes this release cycle. The reset driver tree, that we merge through arm-soc for historical reasons, is also sizable this time around. Among the changes: - clps711x: Treewide changes to compatible strings, merged here for simplicity. - Qualcomm: SCM firmware driver cleanups, move to platform driver - ux500: Major cleanups, removal of old mach-specific infrastructure. - Atmel external bus memory driver - Move of brcmstb platform to the rest of bcm - PMC driver updates for tegra, various fixes and improvements - Samsung platform driver updates to support 64-bit Exynos platforms - Reset controller cleanups moving to devm_reset_controller_register() APIs - Reset controller driver for Amlogic Meson - Reset controller driver for Hisilicon hi6220 - ARM SCPI power domain support" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (100 commits) ARM: ux500: consolidate base platform files ARM: ux500: move soc_id driver to drivers/soc ARM: ux500: call ux500_setup_id later ARM: ux500: consolidate soc_device code in id.c ARM: ux500: remove cpu_is_u* helpers ARM: ux500: use CLK_OF_DECLARE() ARM: ux500: move l2x0 init to .init_irq mfd: db8500 stop passing around platform data ASoC: ab8500-codec: remove platform data based probe ARM: ux500: move ab8500_regulator_plat_data into driver ARM: ux500: remove unused regulator data soc: raspberrypi-power: add CONFIG_OF dependency firmware: scpi: add CONFIG_OF dependency video: clps711x-fb: Changing the compatibility string to match with the smallest supported chip input: clps711x-keypad: Changing the compatibility string to match with the smallest supported chip pwm: clps711x: Changing the compatibility string to match with the smallest supported chip serial: clps711x: Changing the compatibility string to match with the smallest supported chip irqchip: clps711x: Changing the compatibility string to match with the smallest supported chip clocksource: clps711x: Changing the compatibility string to match with the smallest supported chip clk: clps711x: Changing the compatibility string to match with the smallest supported chip ...
2016-07-12ARM: ux500: consolidate base platform filesArnd Bergmann5-139/+88
The cpu.c and cache-l2x0.c files hold only two or three simple functions each, and they are all called from the machine descriptors, so we can just move them all into the same file for simplicity and consistency. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-12ARM: ux500: move soc_id driver to drivers/socArnd Bergmann4-220/+3
As the ux500 id code is basically a standalone driver, we can move it out of the arch code into drivers/soc/ux500. This is a user-visible change, as it moves all the devices in sysfs from /sys/devices/soc0/ to /sys/devices/ and leaves the soc0 node as a separate device. Originally the idea was to put all on-chip devices under the soc node, and ux500 was the first platform to have this device, but later platforms almost all didn't follow that pattern, so this makes the platform do the same thing as everyone else. Since the platform is really obsolete now, I am optimistic that nothing will break after moving the devices around. As the SoC driver no longer has access to the private header files, I'm changing the code to instead look up the address of the backupram from devicetree, which is a good idea anyway. Finally, having a separate Kconfig symbol means the driver is now optional and could even be a loadable module rather than always being built-in if we allowed that for soc_device. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [Fixup mising Makefile, fixup BB_UID_BASE to fc0] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-12ARM: ux500: call ux500_setup_id laterArnd Bergmann2-21/+10
ux500_setup_id is currently called from u8500_map_io(), which is really early, but nothing relies on the ID any more, other than a printk message that is not really all that important to have early during boot. If we move the call to ux500_setup_id() into ux500_soc_device_init(), that file becomes usuable almost entirely standalone, and we can kill off the u8500_map_io() callback as it just does the default debug_ll_io_init() now. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-12ARM: ux500: consolidate soc_device code in id.cArnd Bergmann7-144/+107
Nothing else uses the global dbx500_asic_id structure, so we can merge the two small files that reference it into one. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-12ARM: ux500: remove cpu_is_u* helpersArnd Bergmann1-107/+0
These functions are all unused now and can be removed. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-12ARM: ux500: use CLK_OF_DECLARE()Arnd Bergmann1-12/+0
The ux500 DT support predates the CLK_OF_DECLARE macro and calls directly into the clk driver from platform code. Converting this to CLK_OF_DECLARE makes the code much nicer and similar to how modern platforms do it today. It also removes the last user of cpu_is_u8500_family() etc. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-12ARM: ux500: move l2x0 init to .init_irqArnd Bergmann4-8/+7
The generic IRQ init function also enables the l2 cache implicitly when the machine descriptor sets an .l2c_aux_mask. Let's use that on ux500 and remove the ux500_l2x0_init() along with the cpu_is_u8500_family checks. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-12mfd: db8500 stop passing around platform dataArnd Bergmann2-16/+2
Except for the constant DB8500_PRCMU_FW_VERSION_OFFSET number, nothing is ever passed through the platform data and used in a driver, so we can simply stop passing it around. Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-12ARM: ux500: move ab8500_regulator_plat_data into driverArnd Bergmann4-485/+1
There is only one instance of ab8500_regulator_platform_data, and it's safe to assume we won't ever merge another one, so it's rather pointless to pass it through multiple levels of platform data pointers. This moves the structure and everything referenced by it into the driver that uses it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-12ARM: ux500: remove unused regulator dataArnd Bergmann2-608/+0
Most of the board-mop500-regulators.c file is never referenced and can simply be removed. Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-03ARM: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIBLinus Walleij1-1/+1
This replaces: - "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB" as this can now be selected directly. - "select ARCH_WANT_OPTIONAL_GPIOLIB" with no dependency: GPIOLIB is now selectable by everyone, so we need not declare our intent to select it. When ordering the symbols the following rationale was used: if the selects were in alphabetical order, I moved select GPIOLIB to be in alphabetical order, but if the selects were not maintained in alphabetical order, I just replaced "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB". Cc: Michael Büsch <m@bues.ch> Cc: arm@kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-03-20Merge tag 'armsoc-cleanup' of ↵Linus Torvalds1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Arnd Bergmann: "A few simple cleanups across multiple platforms, not much standing out: - lpc32xx removes its private implementation of the clk API, after generic code was merged in 4.5 - all unused Makefile.boot files get removed - a number of simplifications for shmobile - asm/clkdev.h gets replaced with the asm-generic version after all mach/clkdev.h implementations are gone" * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: shmobile: Kconfig: Get rid of old comment ARM: shmobile: Consolidate SCU mapping code arm: lpc32xx: remove direct control of GPIOs from shared mach file arm: lpc32xx: remove selected HAVE_IDE arm: lpc32xx: switch to common clock framework ARM: Use generic clkdev.h header ARM: plat-versatile: Remove unused clock.c file ARM: netx: remove redundant "depends on ARCH_NETX" ARM: integrator: remove redundant select in Kconfig ARM: drop unused Makefile.boot of Multiplatform SoCs ARM: mvebu: add missing of_node_put() ARM: shmobile: r8a7779: Remove remainings of removed SCU boot setup code ARM: shmobile: Typo s/MIPDR/MPIDR/ ARM: shmobile: Add includes providing forward declarations ARM: shmobile: rcar-gen2: Make rcar_gen2_dma_contiguous static ARM: mv78xx0: use "depends on" instead of "if" after prompt
2016-02-26ARM: ux500: fix ureachable iounmap()Linus Walleij1-1/+3
The code was executing a return with a pointer before reaching iounmap(). Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-02-08ARM: drop unused Makefile.boot of Multiplatform SoCsMasahiro Yamada1-3/+0
The variable "MACHINE" is empty if CONFIG_ARCH_MULTIPLATFORM=y, so these Makefile.boot files are never included. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Michal Simek <michal.simek@xilinx.com> (for Zynq) Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-01-20Merge tag 'armsoc-cleanup' of ↵Linus Torvalds7-58/+4
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "A smallish number of general cleanup commits this release cycle. Some of these are minor tweaks: - shmobile change of binding for their GIC (using arm,pl390 now) - ARCH_RENESAS introduction - Misc other renesas updates There's also a couple of treewide commits from Masahiro Yamada cleaning up const/__initconst for SMP operation structs and a switch to using "depends on" instead of if-constructs on most of the Kconfig platform targets" * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: staging: board: armadillo800eva: Use "arm,pl390" staging: board: kzm9d: Use "arm,pl390" ARM: shmobile: r8a7778 dtsi: Use "arm,pl390" for GIC ARM: shmobile: emev2 dtsi: Use "arm,pl390" for GIC ARM: shmobile: r8a7740 dtsi: Use "arm,pl390" for GIC ARM: shmobile: r7s72100 dtsi: Use "arm,pl390" for GIC ARM: use "depends on" for SoC configs instead of "if" after prompt ARM/clocksource: use automatic DT probing for ux500 PRCMU ARM: use const and __initconst for smp_operations ARM: hisi: do not export smp_operations structures ARM: mvebu: remove unused mach/gpio.h ARM: shmobile: Remove legacy mach/irqs.h ARM: shmobile: Introduce ARCH_RENESAS MAINTAINERS: Remove link to oss.renesas.com which is closed
2015-12-15clocksource/drivers/prcmu: Fix Kconfig and add COMPILE_TEST optionDaniel Lezcano1-0/+1
Let the platform's Kconfig to select the clock instead of having a reverse dependency from the driver to the platform options. Add the COMPILE_TEST option for the compilation test coverage. This change is debatable as the option itself in the Kconfig allows to select the driver for the platform or not. This change will make the prcmu timer always selected. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-01ARM: use "depends on" for SoC configs instead of "if" after promptMasahiro Yamada1-2/+2
Many ARM sub-architectures use prompts followed by "if" conditional, but it is wrong. Please notice the difference between config ARCH_FOO bool "Foo SoCs" if ARCH_MULTI_V7 and config ARCH_FOO bool "Foo SoCs" depends on ARCH_MULTI_V7 These two are *not* equivalent! In the former statement, it is not ARCH_FOO, but its prompt that depends on ARCH_MULTI_V7. So, it is completely valid that ARCH_FOO is selected by another, but ARCH_MULTI_V7 is still disabled. As it is not unmet dependency, Kconfig never warns. This is probably not what you want. The former should be used only when you need to do so, and you really understand what you are doing. (In most cases, it should be wrong!) For enabling/disabling sub-architectures, the latter is always correct. As a good side effect, this commit fixes some entries over 80 columns (mach-imx, mach-integrator, mach-mbevu). [Arnd: I note that there is not really a bug here, according to the discussion that followed, but I can see value in being consistent and in making the lines shorter] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Jun Nie <jun.nie@linaro.org> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Krzysztof Halasa <khc@piap.pl> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-01ARM/clocksource: use automatic DT probing for ux500 PRCMULinus Walleij5-55/+1
The ARM core kernel already calls clocksource_of_init() so why go to all the trouble of locating and probing this node in the machine. CLOCKSOURCE_OF_DECLARE() will take care of it in the clocksource driver, and thus we can also get rid of the dangling header file <linux/clksrc-dbx500-prcmu.h> Suggested-by: Arnd Bergmann <arndb@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-01ARM: use const and __initconst for smp_operationsMasahiro Yamada1-1/+1
These smp_operations structures are not over-written, so add "const" qualifier and replace __initdata with __initconst. Also, add "static" where it is possible. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> # qcom part Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Wei Xu <xuwei5@hisilicon.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-11-10Merge tag 'armsoc-cleanup' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "Again we have a sizable (but not huge) cleanup branch with a net delta of about -3k lines. Main contents here is: - A bunch of development/cleanup of a few PXA boards - Removal of bockw platforms on shmobile, since the platform has now gone completely multiplatform. Whee! - move of the 32kHz timer on OMAP to a proper timesource - Misc cleanup of older OMAP material (incl removal of one board file) - Switch over to new common PWM lookup support for several platforms There's also a handful of other cleanups across the tree, but the above are the major pieces" * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (103 commits) ARM: OMAP3: hwmod data: Remove legacy mailbox data and addrs ARM: DRA7: hwmod data: Remove spinlock hwmod addrs ARM: OMAP4: hwmod data: Remove spinlock hwmod addrs ARM: DRA7/AM335x/AM437x: hwmod: Remove gpmc address space from hwmod data ARM: Remove __ref on hotplug cpu die path ARM: Remove open-coded version of IRQCHIP_DECLARE arm: omap2: board-generic: use omap4_local_timer_init for AM437x ARM: DRA7/AM335x/AM437x: hwmod: Remove elm address space from hwmod data ARM: OMAP: Remove duplicated operand in OR operation clocksource: ti-32k: make it depend on GENERIC_CLOCKSOURCE ARM: pxa: remove incorrect __init annotation on pxa27x_set_pwrmode ARM: pxa: raumfeld: make some variables static ARM: OMAP: Change all cpu_is_* occurences to soc_is_* for id.c ARM: OMAP2+: Rename cpu_is macros to soc_is arm: omap2: timer: limit hwmod usage to non-DT boots arm: omap2+: select 32k clocksource driver clocksource: add TI 32.768 Hz counter driver arm: omap2: timer: rename omap_sync32k_timer_init() arm: omap2: timer: always call clocksource_of_init() when DT arm: omap2: timer: move realtime_counter_init() around ...
2015-10-22ARM: Remove __ref on hotplug cpu die pathStephen Boyd1-1/+1
Now that __cpuinit has been removed, the __ref markings on these functions are useless. Remove them. This also reduces the size of the multi_v7_defconfig image: $ size before after text data bss dec hex filename 12683578 1470996 348904 14503478 dd4e36 before 12683274 1470996 348904 14503174 dd4d06 after presumably because now we don't have to jump to code in the .ref.text section and/or the noinline marking is removed. Cc: Shiraz Hashim <shiraz.linux.kernel@gmail.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: <linux-omap@vger.kernel.org> Cc: <linux-arm-msm@vger.kernel.org> Cc: <spear-devel@list.st.com> Cc: <linux-tegra@vger.kernel.org> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Barry Song <baohua@kernel.org> Acked-by: Andy Gross <agross@codeaurora.org> Acked-by: Viresh Kumar <vireshk@kernel.org> Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-01clocksource: cosmetic: Drop OF 'dependency' from symbolsMarc Zyngier1-1/+1
Seeing the 'of' characters in a symbol that is being called from ACPI seems to freak out people. So let's do a bit of pointless renaming so that these folks do feel at home. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-09-03Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds2-1/+2
Pull ARM development updates from Russell King: "Included in this update: - moving PSCI code from ARM64/ARM to drivers/ - removal of some architecture internals from global kernel view - addition of software based "privileged no access" support using the old domains register to turn off the ability for kernel loads/stores to access userspace. Only the proper accessors will be usable. - addition of early fixup support for early console - re-addition (and reimplementation) of OMAP special interconnect barrier - removal of finish_arch_switch() - only expose cpuX/online in sysfs if hotpluggable - a number of code cleanups" * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (41 commits) ARM: software-based priviledged-no-access support ARM: entry: provide uaccess assembly macro hooks ARM: entry: get rid of multiple macro definitions ARM: 8421/1: smp: Collapse arch_cpu_idle_dead() into cpu_die() ARM: uaccess: provide uaccess_save_and_enable() and uaccess_restore() ARM: mm: improve do_ldrd_abort macro ARM: entry: ensure that IRQs are enabled when calling syscall_trace_exit() ARM: entry: efficiency cleanups ARM: entry: get rid of asm_trace_hardirqs_on_cond ARM: uaccess: simplify user access assembly ARM: domains: remove DOMAIN_TABLE ARM: domains: keep vectors in separate domain ARM: domains: get rid of manager mode for user domain ARM: domains: move initial domain setting value to asm/domains.h ARM: domains: provide domain_mask() ARM: domains: switch to keeping domain value in register ARM: 8419/1: dma-mapping: harmonize definition of DMA_ERROR_CODE ARM: 8417/1: refactor bitops functions with BIT_MASK() and BIT_WORD() ARM: 8416/1: Feroceon: use of_iomap() to map register base ARM: 8415/1: early fixmap support for earlycon ...
2015-09-03Merge branch 'devel-stable' into for-linusRussell King1-1/+1
Conflicts: drivers/perf/arm_pmu.c
2015-09-01Merge branch 'irq-core-for-linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "This updated pull request does not contain the last few GIC related patches which were reported to cause a regression. There is a fix available, but I let it breed for a couple of days first. The irq departement provides: - new infrastructure to support non PCI based MSI interrupts - a couple of new irq chip drivers - the usual pile of fixlets and updates to irq chip drivers - preparatory changes for removal of the irq argument from interrupt flow handlers - preparatory changes to remove IRQF_VALID" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits) irqchip/imx-gpcv2: IMX GPCv2 driver for wakeup sources irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2 irqchip: Add documentation for the bcm2836 interrupt controller irqchip/bcm2835: Add support for being used as a second level controller irqchip/bcm2835: Refactor handle_IRQ() calls out of MAKE_HWIRQ PCI: xilinx: Fix typo in function name irqchip/gic: Ensure gic_cpu_if_up/down() programs correct GIC instance irqchip/gic: Only allow the primary GIC to set the CPU map PCI/MSI: pci-xgene-msi: Consolidate chained IRQ handler install/remove unicore32/irq: Prepare puv3_gpio_handler for irq argument removal tile/pci_gx: Prepare trio_handle_level_irq for irq argument removal m68k/irq: Prepare irq handlers for irq argument removal C6X/megamode-pic: Prepare megamod_irq_cascade for irq argument removal blackfin: Prepare irq handlers for irq argument removal arc/irq: Prepare idu_cascade_isr for irq argument removal sparc/irq: Use access helper irq_data_get_affinity_mask() sparc/irq: Use helper irq_data_get_irq_handler_data() parisc/irq: Use access helper irq_data_get_affinity_mask() mn10300/irq: Use access helper irq_data_get_affinity_mask() irqchip/i8259: Prepare i8259_irq_dispatch for irq argument removal ...
2015-09-01Merge tag 'armsoc-cleanup' of ↵Linus Torvalds5-133/+40
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "A large cleanup branch this release, with a healthy 10k negative line delta. Most of this is removal of legacy (non-DT) support of shmobile platforms. There is also removal of two non-DT platforms on OMAP, and the plat-samsung directory is cleaned out by moving most of the previously shared-location-but-not-actually-shared files from there to the appropriate mach directories instead. There are other sets of changes in here as well: - Rob Herring removed use of set_irq_flags under all platforms and moved to genirq alternatives - a series of timer API conversions to set-state interface - ep93xx, nomadik and ux500 cleanups from Linus Walleij - __init annotation fixes from Nicolas Pitre + a bunch of other changes that all add up to a nice set of cleanups" * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (108 commits) ARM/fb: ep93xx: switch framebuffer to use modedb only ARM: gemini: Setup timer3 as free running timer ARM: gemini: Use timer1 for clockevent ARM: gemini: Add missing register definitions for gemini timer ARM: ep93xx/timer: Migrate to new 'set-state' interface ARM: nomadik: push accelerometer down to boards ARM: nomadik: move l2x0 setup to device tree ARM: nomadik: selectively enable UART0 on boards ARM: nomadik: move hog code to use DT hogs ARM: shmobile: Fix mismerges ARM: ux500: simplify secondary CPU boot ARM: SAMSUNG: remove keypad-core header in plat-samsung ARM: SAMSUNG: local watchdog-reset header in mach-s3c64xx ARM: SAMSUNG: local onenand-core header in mach-s3c64xx ARM: SAMSUNG: local irq-uart header in mach-s3c64xx ARM: SAMSUNG: local backlight header in mach-s3c64xx ARM: SAMSUNG: local ata-core header in mach-s3c64xx ARM: SAMSUNG: local regs-usb-hsotg-phy header in mach-s3c64xx ARM: SAMSUNG: local spi-core header in mach-s3c24xx ARM: SAMSUNG: local nand-core header in mach-s3c24xx ...
2015-08-24clk/ARM: move Ux500 PRCC bases to the device treeLinus Walleij1-15/+6
The base addresses for the Ux500 PRCC controllers are hardcoded, let's move them to the clock node in the device tree and delete the constants. Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Michael Turquette <mturquette@baylibre.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>