summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-ux500/cpu.c
AgeCommit message (Collapse)AuthorFilesLines
2015-12-01ARM/clocksource: use automatic DT probing for ux500 PRCMULinus Walleij1-1/+0
The ARM core kernel already calls clocksource_of_init() so why go to all the trouble of locating and probing this node in the machine. CLOCKSOURCE_OF_DECLARE() will take care of it in the clocksource driver, and thus we can also get rid of the dangling header file <linux/clksrc-dbx500-prcmu.h> Suggested-by: Arnd Bergmann <arndb@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-09-01Merge branch 'irq-core-for-linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "This updated pull request does not contain the last few GIC related patches which were reported to cause a regression. There is a fix available, but I let it breed for a couple of days first. The irq departement provides: - new infrastructure to support non PCI based MSI interrupts - a couple of new irq chip drivers - the usual pile of fixlets and updates to irq chip drivers - preparatory changes for removal of the irq argument from interrupt flow handlers - preparatory changes to remove IRQF_VALID" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits) irqchip/imx-gpcv2: IMX GPCv2 driver for wakeup sources irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2 irqchip: Add documentation for the bcm2836 interrupt controller irqchip/bcm2835: Add support for being used as a second level controller irqchip/bcm2835: Refactor handle_IRQ() calls out of MAKE_HWIRQ PCI: xilinx: Fix typo in function name irqchip/gic: Ensure gic_cpu_if_up/down() programs correct GIC instance irqchip/gic: Only allow the primary GIC to set the CPU map PCI/MSI: pci-xgene-msi: Consolidate chained IRQ handler install/remove unicore32/irq: Prepare puv3_gpio_handler for irq argument removal tile/pci_gx: Prepare trio_handle_level_irq for irq argument removal m68k/irq: Prepare irq handlers for irq argument removal C6X/megamode-pic: Prepare megamod_irq_cascade for irq argument removal blackfin: Prepare irq handlers for irq argument removal arc/irq: Prepare idu_cascade_isr for irq argument removal sparc/irq: Use access helper irq_data_get_affinity_mask() sparc/irq: Use helper irq_data_get_irq_handler_data() parisc/irq: Use access helper irq_data_get_affinity_mask() mn10300/irq: Use access helper irq_data_get_affinity_mask() irqchip/i8259: Prepare i8259_irq_dispatch for irq argument removal ...
2015-08-24clk/ARM: move Ux500 PRCC bases to the device treeLinus Walleij1-15/+6
The base addresses for the Ux500 PRCC controllers are hardcoded, let's move them to the clock node in the device tree and delete the constants. Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Michael Turquette <mturquette@baylibre.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-27irqchip/gic: Remove redundant gic_set_irqchip_flagsSudeep Holla1-1/+0
Now that the GIC chip implementation enables IRQCHIP_SKIP_SET_WAKE and IRQCHIP_MASK_ON_SUSPEND by default, the platforms requiring them need not override the irqchip flags as before. This patch removes all the users of gic_set_irqchip_flags and the function itself. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Simon Horman <horms@verge.net.au> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1436971109-20189-2-git-send-email-sudeep.holla@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-05-18ARM: ux500: look up PRCMU resource from DTLinus Walleij1-7/+13
This removes the static map for the PRCMU in favor of looking up that resource from the device tree. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-15ARM: ux500: switch from gic_arch_extn to gic_set_irqchip_flagsMarc Zyngier1-1/+1
Instead of directly touching gic_arch_extn, which is about to be removed, use gic_set_irqchip_flags instead. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1426088737-15817-4-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-10ARM: ux500: Staticise ux500_soc_attrThierry Reding1-1/+1
This variable is not used outside of the file that it's declared in, so reduce the scope to the local file. Signed-off-by: Thierry Reding <treding@nvidia.com> [Also add const marker after suggestion from Lee Jones] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-28ARM: ux500: skip GIC CPU and dist address checksLinus Walleij1-10/+0
The Ux500 is initializing its IRQs from the device tree and does not need to figure out any static base addresses anymore, this is just dead code so delete it. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26ARM: ux500: Clean-up non-DT IRQ initialisationLee Jones1-16/+6
Decommission the non-DT boot path. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26ARM: ux500: Consolidate [A|D]B8500 platform dataLee Jones1-1/+0
Move the platform data from all these files into one, delete empty files and remove all references to them. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Purge UIB framework when booting with ATAGsLee Jones1-5/+0
It's time to remove all ATAG support from ux500 and rely solely on Device Tree booting. This patch is part of that endeavour. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Call appropriate clock initialisation based on DT or !DT bootingLee Jones1-3/+11
The ux500 platform will soon be converted to Device Tree only. When that happens the old clock initialisation will be ripped out. In the meantime however, we have to make a decision and call the appropriate initialisation code manually. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-19ARM: ux500: add restart support via prcmuFabio Baltieri1-0/+8
Add necessary code to restart ux500 based machines using prcmu_system_reset(). Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-06clk: ux500: Pass clock base adresses in initcall for u8540 and u9540Philippe Begnic1-2/+4
Align on u8500 version, pass clock base address in clk_init functions for u8540 and u9540. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Philippe Begnic <philippe.begnic@st.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-05-03Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds1-3/+2
Pull ARM updates from Russell King: "The major items included in here are: - MCPM, multi-cluster power management, part of the infrastructure required for ARMs big.LITTLE support. - A rework of the ARM KVM code to allow re-use by ARM64. - Error handling cleanups of the IS_ERR_OR_NULL() madness and fixes of that stuff for arch/arm - Preparatory patches for Cortex-M3 support from Uwe Kleine-König. There is also a set of three patches in here from Hugh/Catalin to address freeing of inappropriate page tables on LPAE. You already have these from akpm, but they were already part of my tree at the time he sent them, so unfortunately they'll end up with duplicate commits" * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (77 commits) ARM: EXYNOS: remove unnecessary use of IS_ERR_VALUE() ARM: IMX: remove unnecessary use of IS_ERR_VALUE() ARM: OMAP: use consistent error checking ARM: cleanup: OMAP hwmod error checking ARM: 7709/1: mcpm: Add explicit AFLAGS to support v6/v7 multiplatform kernels ARM: 7700/2: Make cpu_init() notrace ARM: 7702/1: Set the page table freeing ceiling to TASK_SIZE ARM: 7701/1: mm: Allow arch code to control the user page table ceiling ARM: 7703/1: Disable preemption in broadcast_tlb*_a15_erratum() ARM: mcpm: provide an interface to set the SMP ops at run time ARM: mcpm: generic SMP secondary bringup and hotplug support ARM: mcpm_head.S: vlock-based first man election ARM: mcpm: Add baremetal voting mutexes ARM: mcpm: introduce helpers for platform coherency exit/setup ARM: mcpm: introduce the CPU/cluster power API ARM: multi-cluster PM: secondary kernel entry code ARM: cacheflush: add synchronization helpers for mixed cache state accesses ARM: cpu hotplug: remove majority of cache flushing from platforms ARM: smp: flush L1 cache in cpu_die() ARM: tegra: remove tegra specific cpu_disable() ...
2013-05-02Merge branch 'cleanup' into for-linusRussell King1-3/+2
Conflicts: arch/arm/plat-omap/dmtimer.c
2013-04-08ARM: ux500: make remaining headers localArnd Bergmann1-2/+2
mach/setup.h and mach/devices.h are only needed from inside of mach-ux500 now, so we can simply move them out of the include/mach directory. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-08ARM: ux500: get rid of <mach/[hardware|db8500-regs].h>Linus Walleij1-1/+1
This removes <mach/hardware.h> and <mach/db8500-regs.h> from the Ux500, merging them into the local include "db8500-regs.h" in mach-ux500. There is some impact outside the ux500 machine, but most of it is dealt with in earlier patches. Contains portions of a clean-up patch from Arnd Bergmann. Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-08clk: ux500: pass clock base adresses in init callLinus Walleij1-2/+6
The ux500 clock driver was including <mach/db8500-regs.h> which will not work when building for multiplatform support since <mach/*> is going away. Pass the base adresses in the init call instead. Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Mike Turquette <mturquette@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-08ARM: ux500: move PM-related PRCMU functions to machineLinus Walleij1-0/+4
We are trying to decompose and decentralize the code in the DB8500 PRCMU out into subdrivers. The code moved in this patch concerns a group of functions used for decoupling and recoupling the IRQs from the GIC. During sleep and idle the Ux500 system will transfer all IRQ handling to the PRCMU using these functions. Basically we are left with the two alternatives of code placement as: - arch/arm/mach-ux500/pm.c - this because the code is closely related to the GIC, and takes ownership of some of the registers from the PRCMU related to this PM functionality. - drivers/mfd/db8500-prcmu-pm.c - because the code is affecting stuff in the PRCMU register range. But then this code needs to remap and handle GIC registers. This patch implementation is taking the first approach. Currently the cpuidle driver is the only piece of code using this set of functions, but it will later also be used by the suspend/resume code which is currently under review. The header file is moved to: <linux/platform_data/arm-ux500-pm.h> The function prototypes need to be placed in a globally visible header since the CPUidle code is planned to move out to drivers/cpuidle. Acked-by: Samuel Ortiz <sameo@linux.intel.com> Acked-by: Rickard Andersson <rickard.andersson@stericsson.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-08mfd: db8500-prcmu: get base address from resourceLinus Walleij1-2/+0
We cannot use a global variable stored in <mach/hardware.h> to find the base address of the PRCMU. The real resource is already there from the board, so use this to look up the base address instead. Currently the patch is kept minimal so as not to interfere with other work being done on refactoring this driver, but at a later point the defines using (prcmu_base + 0xnnn) need to be replaced by pure offset defined for (0xnnn) and the base inlined with the readl()/writel() and similar codepaths. Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-08mfd: prcmu: pass a base and size with the early initcallLinus Walleij1-6/+9
This patch will make an early remapping of the PRCMU, to be used when setting up the clocks, that will call down into parts of the PRCMU driver before it is probed. Going forward this will be removed like this: - The mailbox subsystem need to be merged. http://marc.info/?l=linux-kernel&m=136314559201983&w=2 - At this point the PRCMU clock code can be moved over to the ux500 clock driver in drivers/clk/ux500/* and maintained there in a decentralized manner. - This early initcall and PRCMU base parameters become part of the ux500_clk_init() call instead. Cc: Suman Anna <s-anna@ti.com> Cc: Loic Pallardy <loic.pallardy@st.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-24ARM: cleanup: soc_device_register() error checkingRussell King1-3/+2
soc_device_register() never returns NULL, it only ever returns an error pointer or a valid pointer. Use the right function (IS_ERR()) to check this. soc_device_to_device() only ever returns &soc_dev->dev, and so can never return an error or NULL if the pointer passed into it was valid, so there's no point checking its return. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-02-21Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-7/+4
Pull ARM SoC cleanups from Arnd Bergmann: "A large number of cleanups, all over the platforms. This is dominated largely by the Samsung platforms (s3c, s5p, exynos) and a few of the others moving code out of arch/arm into more appropriate subsystems. The clocksource and irqchip drivers are now abstracted to the point where platforms that are already cleaned up do not need to even specify the driver they use, it can all get configured from the device tree as we do for normal device drivers. The clocksource changes basically touch every single platform in the process. We further clean up the use of platform specific header files here, with the goal of turning more of the platforms over to being "multiplatform" enabled, which implies that they cannot expose their headers to architecture independent code any more. It is expected that no functional changes are part of the cleanup. The overall reduction in total code lines is mostly the result of removing broken and obsolete code." * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits) ARM: mvebu: correct gated clock documentation ARM: kirkwood: add missing include for nsa310 ARM: exynos: move exynos4210-combiner to drivers/irqchip mfd: db8500-prcmu: update resource passing drivers/db8500-cpufreq: delete dangling include ARM: at91: remove NEOCORE 926 board sunxi: Cleanup the reset code and add meaningful registers defines ARM: S3C24XX: header mach/regs-mem.h local ARM: S3C24XX: header mach/regs-power.h local ARM: S3C24XX: header mach/regs-s3c2412-mem.h local ARM: S3C24XX: Remove plat-s3c24xx directory in arch/arm/ ARM: S3C24XX: transform s3c2443 subirqs into new structure ARM: S3C24XX: modify s3c2443 irq init to initialize all irqs ARM: S3C24XX: move s3c2443 irq code to irq.c ARM: S3C24XX: transform s3c2416 irqs into new structure ARM: S3C24XX: modify s3c2416 irq init to initialize all irqs ARM: S3C24XX: move s3c2416 irq init to common irq code ARM: S3C24XX: Modify s3c_irq_wake to use the hwirq property ARM: S3C24XX: Move irq syscore-ops to irq-pm clocksource: always define CLOCKSOURCE_OF_DECLARE ...
2013-01-29Merge tag 'ux500-no-idh' of ↵Olof Johansson1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/cleanup From Linus Walleij: Removal of the <mach/id.h> include from ux500 - First an ACKed MFD patch deleting the only consumer of these cpu_is* functions outside of mach-ux500 - Introduce a new local cpu_is_u8580() in this patch set to avoid clashing with other patch sets. - Finally de-globalize <mach/id.h>. * tag 'ux500-no-idh' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: ux500: de-globalize <mach/id.h> ARM: ux500: Introduce cpu_is_u8580() mfd: prcmu: delete pin control helpers Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-29ARM: ux500: de-globalize <mach/id.h>Linus Walleij1-0/+1
This removes the file <mach/id.h> from the global kernel include scope, making it a pure mach-ux500 detail. All ASIC specifics needed by drivers shall henceforth be passed from either platform data or the device tree. Cc: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-24ARM: ux500: Fix u9540 booting issuesLee Jones1-4/+2
The u9540 stopped booting after the v3.7 merge window due to a lack of common clk support and early PRCMU initialisation. In this patch we rectify these issues, placing the u9540 development board back into a successfully booting state. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-12irqchip: Move ARM gic.h to include/linux/irqchip/arm-gic.hRob Herring1-1/+1
Now that we have GIC moved to drivers/irqchip and all GIC DT init for platforms using irqchip_init, move gic.h and update the remaining includes. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Anton Vorontsov <avorontsov@mvista.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Samuel Ortiz <sameo@linux.intel.com>
2013-01-12ARM: use common irqchip_init for GIC initRob Herring1-6/+2
Convert all GIC DT initialization over to use common irqchip_init function. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-11-01ARM: ux500: Fix initialisation order for UIBsLee Jones1-0/+3
An earlier change prevented User Interface Boards (UIBs) from being initialised on boards which did not support them. This change had the undesired effect of reordering the UIB initialisation calls with I2C registration. Here we ensure UIBs are only setup after all required infrastructure is already in place. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-10-25ARM: ux500: Fix build error relating to IRQCHIP_SKIP_SET_WAKELee Jones1-0/+1
This patch fixes the build error below: arch/arm/mach-ux500/cpu.c: In function ‘ux500_init_irq’: arch/arm/mach-ux500/cpu.c:55:2: error: invalid use of undefined type ‘struct irq_chip’ arch/arm/mach-ux500/cpu.c:55:24: error: ‘IRQCHIP_SKIP_SET_WAKE’ undeclared (first use in this function) arch/arm/mach-ux500/cpu.c:55:24: note: each undeclared identifier is reported only once for each function it appears in arch/arm/mach-ux500/cpu.c:55:48: error: ‘IRQCHIP_MASK_ON_SUSPEND’ undeclared (first use in this function) Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-10-01Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-1/+1
Pull ARM soc-specific updates from Olof Johansson: "Most notable here is probably the addition of basic support for the BCM2835, an SoC used in some of the Roku 2 players as well as the much-hyped Raspberry Pi, cleaned up and contributed by Stephen Warren. It's still early days on mainline support, with just the basics working. But it has to start somewhere! Beyond that there's some conversions of clock infrastructure on tegra to common clock, misc updates for several other platforms, and OMAP now has its own bus (under drivers/bus) to manage its devices through. This branch adds two new directories outside of arch/arm: drivers/irqchip for new irq controllers, and drivers/bus for the above OMAP bus. It's expected that some of the other platforms will migrate parts of their platforms to those directories over time as well." Fix up trivial conflicts with the clk infrastructure changes. * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (62 commits) ARM: shmobile: add new __iomem annotation for new code ARM: LPC32xx: Support GPI 28 ARM: LPC32xx: Platform update for devicetree completion of spi-pl022 ARM: LPC32xx: Board cleanup irqchip: fill in empty Kconfig ARM: SAMSUNG: Add check for NULL in clock interface ARM: EXYNOS: Put PCM, Slimbus, Spdif clocks to off state ARM: EXYNOS: Add bus clock for FIMD ARM: SAMSUNG: Fix HDMI related warnings ARM: S3C24XX: Add .get_rate callback for "camif-upll" clock ARM: EXYNOS: Fix incorrect help text ARM: EXYNOS: Turn off clocks for NAND, OneNAND and TSI controllers ARM: OMAP: AM33xx hwmod: fixup SPI after platform_data move MAINTAINERS: add an entry for the BCM2835 ARM sub-architecture ARM: bcm2835: instantiate console UART ARM: bcm2835: add stub clock driver ARM: bcm2835: add system timer ARM: bcm2835: add interrupt controller driver ARM: add infra-structure for BCM2835 and Raspberry Pi ARM: tegra20: add CPU hotplug support ...
2012-10-01Merge tag 'fixes-non-critical' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull non-critical ARM soc bug fixes from Olof Johansson: "These were submitted as bug fixes before v3.6 but not considered important enough to be included in it. Some of them cross over to cleanup territory as well, and aren't strictly bugfixes." * tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) ARM: nomadik: remove NAND_NO_READRDY use ARM: pxa: fix return value check in pxa2xx_drv_pcmcia_probe() ARM: SAMSUNG: Add missing variable declaration in s3c64xx_spi1_set_platdata() ARM: S3C24XX: removes unnecessary semicolon ARM: S3C24xx: delete double assignment ARM: EXYNOS: fix address for EXYNOS4 MDMA1 ARM: EXYNOS: fixed SYSMMU setup definition to mate parameter name ARM: ep93xx: Move ts72xx.h out of include/mach ARM: ep93xx: use __iomem pointers for MMIO ARM: msm: Fix early debug uart mapping on some memory configs ARM: msm: io: Change the default static iomappings to be shared ARM: msm: io: Remove 7x30 iomap region from 7x00 ARM: msm: Remove call to missing FPGA init on 8660 ARM: OMAP4: wakeupgen: remove duplicate AUXCOREBOOT* read/write ARM: OMAP4: wakeupgen: Fix the typo in AUXCOREBOOT register save dma: tegra: make data used as *of_device_id.data const can: mpc5xxx_can: make data used as *of_device_id.data const macintosh/mediabay: make data used as *of_device_id.data const i2c/mpc: make data used as *of_device_id.data const mfd/da9052: make i2c_device_id array const ...
2012-09-06ARM: ux500: Switch to use common clock frameworkUlf Hansson1-6/+8
Remove machine specific clock implementation and switch to use new common clock framework. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-08-22ARM: ux500: set proper GIC flagsLinus Walleij1-0/+2
The Ux500 will be able to wake up on any IRQ, so flag it with IRQCHIP_SKIP_SET_WAKE, and we want to mask off the IRQs when going to suspend to avoid transient effects so also flag this with IRQCHIP_MASK_ON_SUSPEND. Cc: Etienne Carriere <etienne.carriere@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-09ARM: ux500: reform Ux500 family namesLinus Walleij1-1/+1
Counting the U9540 and the new U8540 as a U8500 family member does not work. Instead, split the function in two: cpu_is_u8500_family() covering U8500 and U8520 cpu_is_ux540_family() covering U9540 and U8540 This works much better in practice. Update users to keep the same behaviour. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-26Merge tag 'cleanup-initcall' of ↵Linus Torvalds1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull sweeping late_initcall cleanup for arm-soc from Olof Johansson: "This is a patch series from Shawn Guo that moves from individual late_initcalls() to using a member in the machine structure to invoke a platform's late initcalls. This cleanup is a step in the move towards multiplatform kernels since it would reduce the need to check for compatible platforms in each and every initcall." Fix up trivial conflicts in arch/arm/mach-{exynos/mach-universal_c210.c, imx/mach-cpuimx51.c, omap2/board-generic.c} due to changes nearby (and, in the case of cpuimx51.c the board support being deleted) * tag 'cleanup-initcall' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: ux500: use machine specific hook for late init ARM: tegra: use machine specific hook for late init ARM: shmobile: use machine specific hook for late init ARM: sa1100: use machine specific hook for late init ARM: s3c64xx: use machine specific hook for late init ARM: prima2: use machine specific hook for late init ARM: pnx4008: use machine specific hook for late init ARM: omap2: use machine specific hook for late init ARM: omap1: use machine specific hook for late init ARM: msm: use machine specific hook for late init ARM: imx: use machine specific hook for late init ARM: exynos: use machine specific hook for late init ARM: ep93xx: use machine specific hook for late init ARM: davinci: use machine specific hook for late init ARM: provide a late_initcall hook for platform initialization
2012-05-22Merge tag 'pinctrl' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-0/+12
Pull arm soc-specific pinctrl changes from Olof Johansson: "With this, five platforms are moving to the relatively new pinctrl subsystem for their pin management, replacing the older soc specific in-kernel interfaces with common code. There is quite a bit of net addition of code for each platform being added to the pinctrl subsystem. But the payback comes later when adding new boards can be done by only providing new device trees instead." Fix up trivial conflicts in arch/arm/mach-ux500/{Makefile,board-mop500.c} * tag 'pinctrl' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (61 commits) mtd: nand: gpmi: fix compile error caused by pinctrl call ARM: PRIMA2: select PINCTRL and PINCTRL_SIRF in Kconfig ARM: nomadik: enable PINCTRL_NOMADIK where needed ARM: mxs: enable pinctrl support video: mxsfb: adopt pinctrl support ASoC: mxs-saif: adopt pinctrl support i2c: mxs: adopt pinctrl support mtd: nand: gpmi: adopt pinctrl support mmc: mxs-mmc: adopt pinctrl support serial: mxs-auart: adopt pinctrl support serial: amba-pl011: adopt pinctrl support spi/imx: adopt pinctrl support i2c: imx: adopt pinctrl support can: flexcan: adopt pinctrl support net: fec: adopt pinctrl support ARM: ux500: switch MSP to using pinctrl for pins ARM: ux500: alter MSP registration to return a device pointer ARM: ux500: switch to using pinctrl for uart0 ARM: ux500: delete custom pin control system ARM: ux500: switch over to Nomadik pinctrl driver ...
2012-05-14Merge branch 'ux500/delete-u5500' into next/socArnd Bergmann1-7/+1
Conflicts: arch/arm/mach-ux500/cache-l2x0.c arch/arm/mach-ux500/clock.c arch/arm/mach-ux500/cpu.c arch/arm/mach-ux500/mbox-db5500.c arch/arm/mach-ux500/platsmp.c arch/arm/mach-ux500/timer.c Resolve lots of identical conflicts between the removal of u5500 and the addition of u8540. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-08ARM: ux500: use machine specific hook for late initShawn Guo1-0/+6
Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-02ARM: ux500: delete U5500 supportLinus Walleij1-7/+1
This platform has been obsoleted and was only available inside of ST-Ericsson, no users of this code are left in the world. This deletes the core U5500 support entirely in the same manner as the obsoleted U8500 silicon was previously deleted. The cpu_is_u5500() macros that can read out the CPU ID is left until the next kernel cycle, this makes it possible to merge deletion of dependent drivers without breakage. This also has the upside of removing the mailbox driver which was our only driver that was outside the drivers/* hiearchy, now the machine directory only handles machines and nothing else. Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Rabin Vincent <rabin.vincent@stericsson.com> Cc: Jonas Aberg <jonas.aberg@stericsson.com> Cc: Per Forlin <per.forlin@stericsson.com> Cc: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-02ARM: ux500: core U9540 supportLinus Walleij1-2/+2
This adds support for the U9540 variant of the U8500 series. This is an application processor without internal modem. This is the most basic part with ASIC ID, CPU-related fixes, IRQ list, register ranges, timer, UART, and L2 cache setup. This is based on a patch by Michel Jaouen which was rewritten to fit with the latest 3.3 kernel. ChangeLog v1->v2: deleted the irqs-db9540.h file since we expect to migrate to using Device Tree for getting the IRQs to devices. ChangeLog v2->v3: introduced a fixed virtual offset for the ROM as suggested by Arnd Bergmann. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sebastien Pasdeloup <sebastien.pasdeloup-nonst@stericsson.com> Signed-off-by: Michel Jaouen <michel.jaouen@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-24drivers/gpio: gpio-nomadik: Add support for irqdomainsLee Jones1-0/+12
Add irq domain support to the gpio-nomadik GPIO driver. This enables its users to support dynamic IRQ assignment, which is requried by Device Tree. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-03-16ARM: ux500: Enable Cortex-A9 GIC (Generic Interrupt Controller) in Device TreeLee Jones1-1/+13
This enables the embedded GIC on all u8500 based hardware using DT. Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16Merge branch 'ux500/soc' into ux500/dtArnd Bergmann1-0/+75
2012-03-13ARM: ux500: convert to twd_local_timer_register() interfaceMarc Zyngier1-1/+0
Add support for the new smp_twd runtime registration interface to the ux500 platforms, and remove the old compile-time support. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-02-13ARM: ux500: export System-on-Chip information ux500 via sysfsLee Jones1-0/+75
Here we make use of the new System-On-Chip bus driver to export vital SoC information out to userspace via sysfs. This patch provides a data structure of strings to populate the base nodes found in: /sys/devices/soc[0|1|2|...]/[family|machine|revision|soc_id]. It also adds one more node as requested by ST-Ericsson. 'process' depicts the way in which the silicon was manufactured. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-11-03Merge branch 'for-next' of git://git.infradead.org/users/sameo/mfd-2.6Linus Torvalds1-1/+1
* 'for-next' of git://git.infradead.org/users/sameo/mfd-2.6: (80 commits) mfd: Fix missing abx500 header file updates mfd: Add missing <linux/io.h> include to intel_msic x86, mrst: add platform support for MSIC MFD driver mfd: Expose TurnOnStatus in ab8500 sysfs mfd: Remove support for early drop ab8500 chip mfd: Add support for ab8500 v3.3 mfd: Add ab8500 interrupt disable hook mfd: Convert db8500-prcmu panic() into pr_crit() mfd: Refactor db8500-prcmu request_clock() function mfd: Rename db8500-prcmu init function mfd: Fix db5500-prcmu defines mfd: db8500-prcmu voltage domain consumers additions mfd: db8500-prcmu reset code retrieval mfd: db8500-prcmu tweak for modem wakeup mfd: Add db8500-pcmu watchdog accessor functions for watchdog mfd: hwacc power state db8500-prcmu accessor mfd: Add db8500-prcmu accessors for PLL and SGA clock mfd: Move to the new db500 PRCMU API mfd: Create a common interface for dbx500 PRCMU drivers mfd: Initialize DB8500 PRCMU regs ... Fix up trivial conflicts in arch/arm/mach-imx/mach-mx31moboard.c arch/arm/mach-omap2/board-omap3beagle.c arch/arm/mach-u300/include/mach/irqs.h drivers/mfd/wm831x-spi.c
2011-10-31Merge branch 'stericsson/cleanup' into next/timerArnd Bergmann1-69/+0
The timer and cleanup branches from stericsson conflict, so I'm merging them here. Conflicts: arch/arm/mach-ux500/Makefile arch/arm/mach-ux500/cpu.c Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-24mfd: Move to the new db500 PRCMU APIMattias Nilsson1-1/+1
Now that we have a shared API between the DB8500 and DB5500 PRCMU's, switch to using this neutral API instead. We delete the parts of db8500-prcmu.h that is now PRCMU-neutral, and calls will be diverted to respective driver. Common registers are in dbx500-prcmu-regs.h and common accessors and defines in <linux/mfd/dbx500-prcmu.h> This way we get a a lot more abstraction and code reuse. Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-16 12:26:48 +0000