summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-ux500/board-mop500-sdi.c
AgeCommit message (Collapse)AuthorFilesLines
2013-11-26ARM: ux500: Consolidate [A|D]B8500 platform dataLee Jones1-2/+0
Move the platform data from all these files into one, delete empty files and remove all references to them. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Purge SDI support for ATAG bootingLee Jones1-39/+0
It's time to remove all ATAG support from ux500 and rely solely on Device Tree booting. This patch is part of that endeavour. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Remove TC35892 Flexible IO Expander when booting ATAGsLee Jones1-12/+0
It's time to remove all ATAG support from ux500 and rely solely on Device Tree booting. This patch is part of that endeavour. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-02Merge tag 'drivers-for-linus' of ↵Linus Torvalds1-40/+16
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver specific changes from Arnd Bergmann: "These changes are all driver specific and cross over between arm-soc contents and some other subsystem, in these cases cpufreq, crypto, dma, pinctrl, mailbox and usb, and the subsystem owners agreed to have these changes merged through arm-soc. As we proceed to untangle the dependencies between platform code and driver code, the amount of changes in this category is fortunately shrinking, for 3.11 we have 16 branches here and 101 non-merge changesets, the majority of which are for the stedma40 dma engine driver used in the ux500 platform. Cleaning up that code touches multiple subsystems, but gets rid of the dependency in the end. The mailbox code moved out from mach-omap2 to drivers/mailbox is an intermediate step and is still omap specific at the moment. Patches exist to generalize the subsystem and add other drivers with the same API, but those did not make it for 3.11." * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (101 commits) crypto: ux500: use dmaengine_submit API crypto: ux500: use dmaengine_prep_slave_sg API crypto: ux500: use dmaengine_device_control API crypto: ux500/crypt: add missing __iomem qualifiers crypto: ux500/hash: add missing static qualifiers crypto: ux500/hash: use readl on iomem addresses dmaengine: ste_dma40: Declare memcpy config as static ARM: ux500: Remove mop500_snowball_ethernet_clock_enable() ARM: ux500: Correct the EN_3v3 regulator's on/off GPIO ARM: ux500: Provide a AB8500 GPIO Device Tree node gpio: rcar: fix gpio_rcar_of_table gpio-rcar: Remove #ifdef CONFIG_OF around OF-specific sections gpio-rcar: Reference core gpio documentation in the DT bindings clk: exynos5250: Add enum entries for divider clock of i2s1 and i2s2 ARM: dts: Update Samsung I2S documentation ARM: dts: add clock provider information for i2s controllers in Exynos5250 ARM: dts: add Exynos audio subsystem clock controller node clk: samsung: register audio subsystem clocks using common clock framework ARM: dts: use #include for all device trees for Samsung pinctrl: s3c24xx: use correct header for chained_irq functions ...
2013-06-04ARM: ux500: Replace ST-E's home-brew DMA direction definition with the ↵Lee Jones1-8/+8
generic one STEDMA40_*_TO_* direction definitions are identical in all but name to the pre-defined generic DMA_*_TO_* ones. Let's make things easy by not duplicating such things. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-27ARM: ux500: Enable support for UHS-I SD-cardsUlf Hansson1-1/+3
By setting the host capabilities MMC_CAP_UHS_SDR12|25 for the SD card device we enable support for UHS cards. The supported mode is SDR12 and SDR25. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-27ARM: ux500: Set eMMC and WLAN card slot as non-removableUlf Hansson1-1/+4
For several reasons, the mmc protocol layer expects devices being non-removable to use MMC_CAP_NONREMOVABLE, so then we adapt to this expectation. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-27ARM: ux500: Enable support for discard for MMC/SDUlf Hansson1-1/+4
By enabling MMC_CAP_ERASE for the SD/MMC devices the mmc block layer will now act on DISCARD requests. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-27ARM: ux500: Enable support for RPMB and Reliable Write for eMMCUlf Hansson1-4/+8
By adding MMC_CAP_CMD23 for the eMMC devices, we can support RPMB and Reliable Write. Additionally it will mean CMD12 will not be sent to end a successful data transfer. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-27ARM: ux500: Don't set plf ocr mask for SD/MMC deviceUlf Hansson1-2/+0
The mmci host driver overrides platform ocr mask when a vmmc regulator can be used. This is the case for sdi0(SD-card) and for sdi4(eMMC). Thus it is pointless of specifing these mask and why we do remove them. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-27ARM: ux500: Enable 100MHz for SD/SDIO/MMC devicesUlf Hansson1-4/+4
We are able to cope with an SDMMC clock of 100MHz so let's make use of the full frequency instead of the half. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-23ARM: ux500: Remove unused 'data_width' attributes from SDI DMA configsLee Jones1-16/+0
DMA configuration data is now allocated in the MMCI driver, so these are just ignored. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-23dmaengine: ste_dma40: Amalgamate DMA source and destination channel numbersLee Jones1-16/+8
Devices which utilise DMA use the same device numbers for transmitting and receiving. In this patch we encode the source and destination information into one single attribute. We can subsequently exploit the direction attribute to see which of the transfer directions are being described. This also lessens the burden on platform data. Cc: Dan Williams <djbw@fb.com> Cc: Per Forlin <per.forlin@stericsson.com> Cc: Rabin Vincent <rabin@rab.in> Acked-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-02Merge tag 'multiplatform-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC multiplatform updates from Olof Johansson: "More multiplatform enablement for ARM platforms. The ones converted in this branch are: - bcm2835 - cns3xxx - sirf - nomadik - msx - spear - tegra - ux500 We're getting close to having most of them converted! One of the larger platforms remaining is Samsung Exynos, and there are a bunch of supporting patches in this merge window for it. There was a patch in this branch to a early version of multiplatform conversion, but it ended up being reverted due to need of more bake time. The revert commit is part of the branch since it would have required rebasing multiple dependent branches and they were stable by then" * tag 'multiplatform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (70 commits) mmc: sdhci-s3c: Fix operation on non-single image Samsung platforms clocksource: nomadik-mtu: fix up clocksource/timer Revert "ARM: exynos: enable multiplatform support" ARM: SPEAr13xx: Fix typo "ARCH_HAVE_CPUFREQ" ARM: exynos: enable multiplatform support rtc: s3c: make header file local mtd: onenand/samsung: make regs-onenand.h file local thermal/exynos: remove unnecessary header inclusions mmc: sdhci-s3c: remove platform dependencies ARM: samsung: move mfc device definition to s5p-dev-mfc.c ARM: exynos: move debug-macro.S to include/debug/ ARM: exynos: prepare for sparse IRQ ARM: exynos: introduce EXYNOS_ATAGS symbol ARM: tegra: build assembly files with -march=armv7-a ARM: Push selects for TWD/SCU into machine entries ARM: ux500: build hotplug.o for ARMv7-a ARM: ux500: move to multiplatform ARM: ux500: make remaining headers local ARM: ux500: make irqs.h local to platform ARM: ux500: get rid of <mach/[hardware|db8500-regs].h> ...
2013-04-08ARM: ux500: make remaining headers localArnd Bergmann1-1/+1
mach/setup.h and mach/devices.h are only needed from inside of mach-ux500 now, so we can simply move them out of the include/mach directory. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-08ARM: ux500: get rid of <mach/[hardware|db8500-regs].h>Linus Walleij1-1/+1
This removes <mach/hardware.h> and <mach/db8500-regs.h> from the Ux500, merging them into the local include "db8500-regs.h" in mach-ux500. There is some impact outside the ux500 machine, but most of it is dealt with in earlier patches. Contains portions of a clean-up patch from Arnd Bergmann. Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-01ARM: ux500: Remove traces of the ios_handler from platform codeLee Jones1-52/+0
Now MMCI on/off functionality is using the regulator framework from the MMCI driver, there is no need to keep the ios_handler laying around, duplicating functionality. So we're removing it. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-05ARM: plat-nomadik: move DMA40 header to <linux/platform_data>Linus Walleij1-1/+1
This moves the DMA40 platform data header from <plat/ste_dma40.h> to <linux/platform_data/dma-ste-dma40.h> where is belongs. Cc: Dan Williams <djbw@fb.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Ola Lilja <ola.o.lilja@stericsson.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Andreas Westin <andreas.westin@stericsson.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-20ARM: ux500: Pass SDI DMA information though AUX_DATA to MMCILee Jones1-2/+2
There are four SDIs on the HREF, as opposed to the original two enabled on Snowball. To get them working we have to pass their DMA information in the same was as we need with the other two. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-07-13ARM: ux500: Enable Device Tree support mmci for SnowballLee Jones1-2/+2
Allow proper initialisation for MMC via the mmci driver for the Snowball low-cost development board using DT. At the moment we continue to use DMA setup from platform code. Once the DMA generic DT bindings have been completed we can then port the remainder over to DT. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-03-28Merge tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-15/+16
Pull "ARM: More SoC support updates" from Olof Johansson: "This branch contains a handful of updates of SoC base code that had dependencies on other external trees that have now been merged: * Support for the new EXYNOS5250 SoC from Samsung * SMP and power domain support for Tegra3 from NVIDIA * ux500 updates for exporting SoC information through sysfs" Fix up trivial merge conflicts as per Olof. * tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (30 commits) ARM: mach-shmobile: ap4evb: Reserve DMA memory for the frame buffer ARM: EXYNOS: Fix compilation error with mach-exynos4-dt board ARM: dts: add initial dts file for EXYNOS5250, SMDK5250 ARM: EXYNOS: add support device tree enabled board file for EXYNOS5 ARM: EXYNOS: add support ARCH_EXYNOS5 for EXYNOS5 SoCs ARM: EXYNOS: add support get_core_count() for EXYNOS5250 ARM: EXYNOS: support EINT for EXYNOS4 and EXYNOS5 ARM: EXYNOS: add interrupt definitions for EXYNOS5250 ARM: EXYNOS: add support for EXYNOS5250 SoC ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5 ARM: EXYNOS: add initial setup-i2c0 for EXYNOS5 ARM: EXYNOS: add clock part for EXYNOS5250 SoC ARM: EXYNOS: use exynos_init_uarts() instead of exynos4_init_uarts() ARM: EXYNOS: to declare static for mach-exynos/common.c ARM: EXYNOS: Add clkdev lookup entry for lcd clock ARM: dt: Explicitly configure all serial ports on Tegra Cardhu ARM: tegra: support for secondary cores on Tegra30 ARM: tegra: support for Tegra30 CPU powerdomains ARM: tegra: add support for Tegra30 powerdomains ARM: tegra: export tegra_powergate_is_powered() ...
2012-03-23Merge branch 'amba' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds1-13/+8
Pull #2 ARM updates from Russell King: "Further ARM AMBA primecell updates which aren't included directly in the previous commit. I wanted to keep these separate as they're touching stuff outside arch/arm/." * 'amba' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7362/1: AMBA: Add module_amba_driver() helper macro for amba_driver ARM: 7335/1: mach-u300: do away with MMC config files ARM: 7280/1: mmc: mmci: Cache MMCICLOCK and MMCIPOWER register ARM: 7309/1: realview: fix unconnected interrupts on EB11MP ARM: 7230/1: mmc: mmci: Fix PIO read for small SDIO packets ARM: 7227/1: mmc: mmci: Prepare for SDIO before setting up DMA job ARM: 7223/1: mmc: mmci: Fixup use of runtime PM and use autosuspend ARM: 7221/1: mmc: mmci: Change from using legacy suspend ARM: 7219/1: mmc: mmci: Change vdd_handler to a generic ios_handler ARM: 7218/1: mmc: mmci: Provide option to configure bus signal direction ARM: 7217/1: mmc: mmci: Put power register deviations in variant data ARM: 7216/1: mmc: mmci: Do not release spinlock in request_end ARM: 7215/1: mmc: mmci: Increase max_segs from 16 to 128
2012-02-13ARM: ux500: pass parent pointer to each platform deviceLee Jones1-15/+16
This patch provides a means for any device within ux500 platform code to allocate its own parent. This is particularly prudent with the introduction of /sys/devices/socX, as a device can now proclaim to be integral part of an SoC, rather than a more generic platform device. Latter patches make good use of this functionality. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-01-20mach-ux500: no MMC_CAP_SD_HIGHSPEED on SnowballPhilippe Langlais1-0/+2
MMC_CAP_SD_HIGHSPEED is not supported on Snowball board resulting on initialization errors. Cc: stable@kernel.org Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Fredrik Soderstedt <fredrik.soderstedt@stericsson.com> Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-01-20ARM: 7219/1: mmc: mmci: Change vdd_handler to a generic ios_handlerUlf Hansson1-13/+8
The purpose of the vdd_handler does not make sense. We remove it and use a generic approach instead. A new ios_handler is added, the purpose of which e.g. can be to control GPIO pins to a levelshifter. Previously the vdd_handler was also used for making additional changes to the power register bits. This option is superfluous and is therefore removed. Adaptaptions from the old vdd_handler to the new ios_handler is done for mach-ux500 board, which was the only one using the vdd_handler. This patch is based upon a patch from Sebastian Rasmussen. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sebastian Rasmussen <sebastian.rasmussen@stericsson.com> Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-19ARM: ux500: remove support for early silicon revisionsLinus Walleij1-34/+20
The DB8500 ED (Early Drop) and V1 are only available inside of ST-Ericsson or partners, we have actively replaced and scrapped these prototypes. All Nova products on the open market (such as the Snowball board) are based on V2 and later ASIC variants. So let us focus on supporting the silicon that will be used and delete this to get a clear overview. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-12-12ARM: ux500: add device sdi1 for SDIOStefan Nilsson XK1-0/+38
Adds device sdi1 for ST-Ericsson HREFv60 and later to enable the possiblity of using the onboard CW1200 chip for WLAN. Signed-off-by: Stefan Nilsson XK <stefan.xk.nilsson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-08-30mach-ux500: remove most of the ugly machine_is_*() callsLee Jones1-17/+35
Do more work in the per-machine init calls instead of customizing each init call. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-06-23mach-ux500: Add SDI support for snowball boardMathieu J. Poirier1-5/+14
With SDI support for the Snowball we can boot from the SD card. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
2011-06-21mach-ux500: correct MMC/SDI parametersLinus Walleij1-4/+6
We cannot clock the MMCI blocks more than 50 MHz. A bug prevented us from seeing the effect of actually driving them to 100 MHz, which indeed resulted failure, on the external SD card. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-06-21mach-ux500: fix HREFv60 regressionLinus Walleij1-8/+24
This fixes a regression on the HREFv60 ux500 hardware: the wrong level shifter was addressed in the MMCI vdd handler, trying to reconfigure an unclaimed GPIO pin. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2011-05-26ARM: 6830/1: mach-ux500: force PrimeCell revisionsLinus Walleij1-4/+12
The DB8500v2 and DB5500 has a fifth version of the "PL023" and PL180 blocks. However the ASIC engineers have forgot to bump the revision in the PrimeCell peripheral ID registers. Since the platform is aware of the actual silicon revision we need to hard-code the periphid from the platform, bumping the subrevision field to 1. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-03-14mach-ux500: basic HREFv60 support v2Linus Walleij1-9/+33
The HREFv60 variant of the MOP500 family of boards remove the external GPIO expander and route these pins back to some of the readily available internal GPIO pins instead. Based on a patch by Bibek Basu <bibek.basu@stericsson.com> for an internal kernel version. Cc: Bibek Basu <bibek.basu@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: add hrefv60 GPIO pinsBibek Basu1-58/+7
This will centralize all GPIO pin muxing for the different boards in the MOP500 family to a single file. It also kills off the deprecated support for the ED (Early Drop) ASIC, this should never be spotted in the open and ST-Ericsson have internally deprecated this hardware. Signed-off-by: Bibek Basu <bibek.basu@stericsson.com> [Rebasing and kill old ASIC support] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: config Ux500 PL011 PL022 PL180 for DMALinus Walleij1-0/+77
This will configure the platform data for the PL011, PL022 and PL180 (derivate) PrimeCells found in the Ux500 to use DMA with the generic DMA engine for DMA40. Signed-off-by: Per Forlin <per.forlin@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: fix inverted SD-card GPIO pinPhilippe Langlais1-2/+2
The levelshifter pins were set to inverted values, fix this up. Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2010-12-08ux500: minor revision to the eMMC/SD configLinus Walleij1-1/+10
A small fixup for the v1(.0) ASIC. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-08ux500: rework device registrationRabin Vincent1-7/+4
Change the Ux500 devices to be dynamically allocated and added by calling functions instead of referencing structures, thereby allowing 5500 and other derivatives' support to be added without having to duplicate structures, use fixup functions, or use compile-time macros. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-08ux500: use _cansleep GPIO functionsLinus Walleij1-2/+2
Similar to the patch to MMCI this silences similar messages from the platform code. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-08ux500: mop500: add TC35892 and MicroSD slot supportRabin Vincent1-0/+63
Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-09-02ARM: 6335/1: ux500: mop500: register eMMC devicesHanumath Prasad1-0/+91
Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Hanumath Prasad <hanumath.prasad@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-16 16:41:45 +0000