summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-shmobile
AgeCommit message (Collapse)AuthorFilesLines
2011-07-25Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) fs: Merge split strings treewide: fix potentially dangerous trailing ';' in #defined values/expressions uwb: Fix misspelling of neighbourhood in comment net, netfilter: Remove redundant goto in ebt_ulog_packet trivial: don't touch files that are removed in the staging tree lib/vsprintf: replace link to Draft by final RFC number doc: Kconfig: `to be' -> `be' doc: Kconfig: Typo: square -> squared doc: Konfig: Documentation/power/{pm => apm-acpi}.txt drivers/net: static should be at beginning of declaration drivers/media: static should be at beginning of declaration drivers/i2c: static should be at beginning of declaration XTENSA: static should be at beginning of declaration SH: static should be at beginning of declaration MIPS: static should be at beginning of declaration ARM: static should be at beginning of declaration rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_check Update my e-mail address PCIe ASPM: forcedly -> forcibly gma500: push through device driver tree ... Fix up trivial conflicts: - arch/arm/mach-ep93xx/dma-m2p.c (deleted) - drivers/gpio/gpio-ep93xx.c (renamed and context nearby) - drivers/net/r8169.c (just context changes)
2011-07-24Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds3-5/+37
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (237 commits) ARM: 7004/1: fix traps.h compile warnings ARM: 6998/2: kernel: use proper memory barriers for bitops ARM: 6997/1: ep93xx: increase NR_BANKS to 16 for support of 128MB RAM ARM: Fix build errors caused by adding generic macros ARM: CPU hotplug: ensure we migrate all IRQs off a downed CPU ARM: CPU hotplug: pass in proper affinity mask on IRQ migration ARM: GIC: avoid routing interrupts to offline CPUs ARM: CPU hotplug: fix abuse of irqdesc->node ARM: 6981/2: mmci: adjust calculation of f_min ARM: 7000/1: LPAE: Use long long printk format for displaying the pud ARM: 6999/1: head, zImage: Always Enter the kernel in ARM state ARM: btc: avoid invalidating the branch target cache on kernel TLB maintanence ARM: ARM_DMA_ZONE_SIZE is no more ARM: mach-shark: move ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-sa1100: move ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-realview: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-pxa: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-ixp4xx: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-h720x: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-davinci: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ...
2011-07-22Merge branches 'btc', 'dma', 'entry', 'fixes', 'linker-layout', 'misc', ↵Russell King6-9/+41
'mmci', 'suspend' and 'vfp' into for-next
2011-07-14ARM / shmobile: Return -EBUSY from A4LC power off if A3RV is activeRafael J. Wysocki1-2/+1
Since the A4LC should only be powered off if the A3RV is off, make the A4LC's power down routine return -EBUSY if A3RV is not off to indicate to the core that it doesn't want to power off the domain in that case. This will cause the core to regard A4LC as active, so the pm_genpd_poweron() in pd_power_down_a3rv() is not necessary any more. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Magnus Damm <damm@opensource.se>
2011-07-14ARM / shmobile: Use genpd_queue_power_off_work()Rafael J. Wysocki1-1/+1
Make pd_power_down_a3rv() use genpd_queue_power_off_work() to queue up the powering off of the A4LC domain to avoid queuing it up when it is pending. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Magnus Damm <damm@opensource.se>
2011-07-13ARM / shmobile: Use pm_genpd_poweroff_unused()Rafael J. Wysocki3-18/+2
Make shmobile use pm_genpd_poweroff_unused() instead of the open-coded powering off PM domains without devices in use. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Magnus Damm <damm@opensource.se>
2011-07-11Merge branch 'master' into for-nextJiri Kosina5-74/+164
Sync with Linus' tree to be able to apply pending patches that are based on newer code already present upstream.
2011-07-11ARM: static should be at beginning of declarationJesper Juhl1-1/+1
Make sure that the 'static' keywork is at the beginning of declaration for arch/arm/mach-shmobile/board-ap4evb.c This gets rid of warnings like warning: ‘static’ is not at beginning of declaration when building with -Wold-style-declaration (and/or -Wextra which also enables it). Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-10ARM: mach-shmobile: sh7372 A3RV requires A4LCMagnus Damm1-3/+42
Add a power domain workaround for the VPU and A3RV on sh7372. The sh7372 data sheet mentions that the VPU is located in the A3RV power domain. The A3RV power domain is not related to A4LC in any way, but testing shows that unless A3RV _and_ A4LC are powered on the VPU test program will bomb out. This issue may be caused by a more or less undocumented dependency on the MERAM block that happens to be located in A4LC. So now we know that the out-of-reset requirement of the VPU is that the MERAM is powered on. This patch adds a workaround for A3RV to make sure A4LC is powered on - this so we can use the VPU even though the LCDCs are in blanking state and A4LC is supposed to be off. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-10ARM: mach-shmobile: sh7372 late pm domain offMagnus Damm1-0/+13
Add sh7372 specific code to power down unused pm domains. This should really be replaced by some generic PM core code IMO, but until that happens this patch makes sure we don't waste power by leaving unused power domains on. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-10ARM: mach-shmobile: Runtime PM late init callbackMagnus Damm2-0/+11
Add a mach-shmobile specific callback for SoC-specific code to hook into. By having the late_initcall() in a common place we can have multi-SoC/board support in the same kernel binary. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-10ARM: mach-shmobile: sh7372 D4 supportMagnus Damm3-0/+6
Add support for the sh7372 D4 power domain. This power domain contains the Coresight-ETM hardware block. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-10ARM: mach-shmobile: sh7372 A4MP supportKuninori Morimoto5-0/+10
Add support for the sh7372 A4MP power domain and hook up the FSI/SPU2 device. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-10ARM: mach-shmobile: sh7372: make sure that fsi is peripheral of spu2Kuninori Morimoto3-0/+3
FSI act as peripheral circuits of the SPU2. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-07ARM: 6993/1: platsmp: Allow secondary cpu hotplug with maxcpus=1Stephen Boyd1-5/+0
If an ARM system has multiple cpus in the same socket and the kernel is booted with maxcpus=1, secondary cpus are possible but not present due to how platform_smp_prepare_cpus() is called. Since most typical ARM processors don't actually support physical hotplug, initialize the present map to be equal to the possible map in generic ARM SMP code. Also, always call platform_smp_prepare_cpus() as long as max_cpus is non-zero (0 means no SMP) to allow platform code to do any SMP setup. After applying this patch it's possible to boot an ARM system with maxcpus=1 on the command line and then hotplug in secondary cpus via sysfs. This is more in line with how x86 does things. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: David Brown <davidb@codeaurora.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-02ARM: mach-shmobile: sh7372 A3SG supportMagnus Damm3-0/+6
Add support for the sh7372 A3SG power domain. This domain contains the SGX hardware block, but there is no open source driver available. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-02ARM: mach-shmobile: sh7372 A3RI supportMagnus Damm3-0/+6
Add support for the sh7372 A3RI power domain. This domain contains the ISP hardware block, but there is no driver available. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-02ARM: mach-shmobile: sh7372 A3RV supportMagnus Damm3-0/+8
Add support for the sh7372 A3RV power domain and hook up the VPU device. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-02ARM: mach-shmobile: sh7372 A4LC support for AP4EVBMagnus Damm3-1/+5
The AP4EVB board is also using a sh7372 SoC, so tie in A4LC support on that board as well. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-02ARM / shmobile: Support for I/O power domains for SH7372 (v9)Rafael J. Wysocki3-0/+130
Use the generic power domains support introduced by the previous patch to implement support for power domains on SH7372. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Paul Mundt <lethal@linux-sh.org>
2011-07-02PM: Rename clock management functionsRafael J. Wysocki1-3/+3
The common PM clock management functions may be used for system suspend/resume as well as for runtime PM, so rename them accordingly. Modify kerneldoc comments describing these functions and kernel messages printed by them, so that they refer to power management in general rather that to runtime PM. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-02PM / Domains: Rename struct dev_power_domain to struct dev_pm_domainRafael J. Wysocki1-4/+4
The naming convention used by commit 7538e3db6e015e890825fbd9f86599b (PM: Add support for device power domains), which introduced the struct dev_power_domain type for representing device power domains, evidently confuses some developers who tend to think that objects of this type must correspond to "power domains" as defined by hardware, which is not the case. Namely, at the kernel level, a struct dev_power_domain object can represent arbitrary set of devices that are mutually dependent power management-wise and need not belong to one hardware power domain. To avoid that confusion, rename struct dev_power_domain to struct dev_pm_domain and rename the related pointers in struct device and struct pm_clk_notifier_block from pwr_domain to pm_domain. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Kevin Hilman <khilman@ti.com>
2011-06-30ARM: mach-shmobile: make a struct in board-ap4evb.c staticGuennadi Liakhovetski1-1/+1
struct soc_camera_link imx074_link in board-ap4evb.c doesn't have to be global. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-29ARM: 6886/1: mmc, Add zboot from eSD support for SuperH Mobile ARMSimon Horman2-0/+37
This allows a ROM-able zImage to be written to eSD and for SuperH Mobile ARM to boot directly from the SDHI hardware block. This is achieved by the MaskROM loading the first portion of the image into MERAM and then jumping to it. This portion contains loader code which copies the entire image to SDRAM and jumps to it. From there the zImage boot code proceeds as normal, uncompressing the image into its final location and then jumping to it. Cc: Paul Mundt <lethal@linux-sh.org> Acked-by: Magnus Damm <magnus.damm@gmail.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-06-21ARM: mach-shmobile: ag5evm: consistently name sdhi info structuresSimon Horman1-2/+2
Name the SDHI1 instance sh_sdhi1_info to be consistent with sh_sdhi0_info. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-21ARM: mach-shmobile: mackerel: change usbhs devices orderKuninori Morimoto1-1/+1
USB1 can use IRQ interrupt and notify function for usbhs driver, but USB0 is using polling for it. The priority of usbhs devices order USB1 > USB0 is good idea Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Simon Horman <horms@verge.net.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-15ARM: mach-shmobile: mackerel: tidyup usbhs driver settingsKuninori Morimoto1-15/+6
- usb0 pipe is same as default. own pipe config is not needed - usb1 lost get_id function Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-14ARM: mach-shmobile: Correct SCIF port types for SH7367.Paul Mundt1-7/+7
While SH7377 and others were updated to properly use SCIFA/B port types, SH7367 was left behind. Fix it up accordingly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-14ARM: mach-shmobile: sh73a0 gic_arch_extn.irq_set_wake() fixMagnus Damm1-0/+6
Initialize ->irq_set_wake() in gic_arch_extn to unbreak wake up from the KEYSC device on AG5EVM in case of Suspend-to-RAM. Without this patch "echo mem > /sys/power/state" and a key press results in the following message on resume: WARNING: at kernel/irq/manage.c:507 irq_set_irq_wake+0x7c/0xd8() Unbalanced IRQ 103 wake disable Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-14ARM: mach-shmobile: Mackerel USB platform data updateMagnus Damm1-65/+160
This patch updates the board specific USB support code for the sh7372 Mackerel board. With this patch applied port CN22 is driven by the recently added renesas_usbhs driver using the first USB controller included in sh7372 aka USBHS0. Hotplugging of USBHS0 unfortunately has to be handled by software polling. The sh7372 SoC itself obviously supports hotplug notification by IRQ but on the Mackerel board this IRQ happens to be used for the touch screen. Also fix the pinmux configuration to avoid setting up unused pins and fix minor spelling errors. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-14ARM: mach-shmobile: AG5EVM SDHI1 platform data updateMagnus Damm1-3/+1
Add a flag for SDHI1 to enable SDIO IRQ, and remove DMA Engine slave id:s to disable DMA as a workaround. Tested on sh73a0/AG5EVM with a BCM4318-based SDIO card. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-02ARM: mach-shmobile: add DMAC clock definitions on SH7372Guennadi Liakhovetski1-0/+7
These definitions are needed to let the runtime PM subsystem turn off DMAC clocks, when it is suspended by the driver. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-26ARM: arch-shmobile: support SDHI card detection on mackerel, using a GPIOGuennadi Liakhovetski1-0/+20
On sh7372 the card-detection pin of SDHI0 can also produce interrupts, when configured as GPIO. Use this feature to power down SDHI0, when no card is plugged in. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-26Merge branch 'rmobile/fbdev' into rmobile-latestPaul Mundt2-0/+114
2011-05-25ARM: mach-shmobile: mackerel: add renesas_usbhs support for USB1Kuninori Morimoto1-1/+190
renesas_usbhs driver can use external interrupt mode (which come from USB-PHY) or autonomy mode (it use own interrupt) for detecting connection/disconnection when Function. And it will be power OFF while it has been disconnecting if external interrupt mode is selected. mackerel board has 2 USB ports. But we can not use external interrupt mode on CN22 USB0 port which is only for USB Function. IRQ7-PORT40 is already used by Touchscreen, and USB-PHY needs IRQ7-PORT167. It is impossible to use IRQ7 demux on mackerel. We can use external interrupt mode USB-Function on "USB1". USB1 can become Host by r8a66597, and become Function by renesas_usbhs. But don't select both drivers in same time. These 2 drivers are not supporting IRQ SHARD. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-25ARM: mach-shmobile: Correct the G4EVM SDHI0 I/O range.Paul Mundt1-1/+1
This obviously should have been 0xe6d500ff, fix it up accordingly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-25ARM: arch-shmobile: sh7372: add renesas_usbhs irq supportKuninori Morimoto1-0/+2
renesas_usbhs is remake version of r8a66597 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-25sh_mobile_meram: MERAM platform data for LCDCDamian2-0/+114
Based on the patch by Takanari Hayama <taki@igel.co.jp> Add the necessary platform data to add MERAM functionality to LCDC Includes platform data for both the AP4EVB and mackerel Signed-off-by: Damian Hobson-Garcia <dhobsong@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-25ARM: mach-shmobile: sh73a0: mark DMA slave ID 0 as invalidMagnus Damm1-0/+1
This makes it possible to leave DMA slave IDs in the platform data at default 0 value without hitting DMA channel allocation error paths. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-25ARM: mach-shmobile: mark DMA slave ID 0 as invalidGuennadi Liakhovetski1-0/+1
This makes it possible to leave DMA slave IDs in the platform data at default 0 value without hitting DMA channel allocation error paths. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-25ARM: mach-shmobile: Enable DMAEngine for SDHI on AG5EVMMagnus Damm1-0/+4
Add SDHI0 and SDHI1 slave ids for RX and TX to enable DMA Engine support for SDHI on the AG5EVM board. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-25ARM: mach-shmobile: Enable DMAEngine for MMCIF on AG5EVMMagnus Damm1-0/+9
Simply add MMCIF slave ids for RX and TX to enable DMA Engine support for the AG5EVM board. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-25ARM: mach-shmobile: sh73a0 DMA Engine support for SY-DMACMagnus Damm3-1/+277
Add SY-DMAC support via shdma.c to the sh73a0 SoC including slave ids, platform data and clock bindings. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-25ARM: mach-shmobile: Tidy up after SH7372 pm changes.Paul Mundt1-1/+1
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-25ARM: mach-shmobile: sh7372 Core Standby CPUIdleMagnus Damm1-2/+31
This patch ties in the previously added sh7372 sleep mode known as Core Standby together with the shared SH-Mobile ARM CPUIdle implementation. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-25ARM: mach-shmobile: CPUIdle supportMagnus Damm3-0/+96
This patch adds a shared SH-Mobile ARM specific CPUIdle implementation supporting WFI only at this point. It serves as a common point for late registration of the arch-specific CPUIdle code, and supports adding extra sleep modes using the callback shmobile_cpuidle_setup() together with shmobile_cpuidle_modes[]. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-25ARM: mach-shmobile: sh7372 Core Standby Suspend-to-RAMMagnus Damm6-0/+345
Add sh7372 Core Standby sleep mode support and tie it in with the shared SH-Mobile ARM suspend code. The Core Standby mode is the lightest sh7372-specific sleep mode, cutting power to the ARM core excluding the L2 cache. Any interrupt source can be used for wakeups. The low level portion of this code is based on the TI OMAP sleep code in sleep34xx.S, thanks to them. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-25ARM: mach-shmobile: Suspend-to-RAM supportMagnus Damm3-0/+51
This patch adds a simple Suspend-to-RAM implementation for SH-Mobile ARM. The struct shmobile_suspend_ops are kept global to allow cpu-specific code to override the callbacks if needed. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24ARM: switch mackerel to dynamically manage the platform cameraGuennadi Liakhovetski1-21/+7
Use soc_camera_platform helper functions to dynamically manage the camera device. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24ARM: mach-shmobile: Add SDHI support for AG5EVM and sh73a0Magnus Damm2-1/+118
Add SDHI0 and SDHI1 support to the AG5EVM board including platform data, pinmux configuration and clock bindings. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-05 06:29:21 +0000