summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-shmobile/include/mach/r8a7778.h
AgeCommit message (Collapse)AuthorFilesLines
2014-06-25ARM: shmobile: Move r8a7778.hGeert Uytterhoeven1-83/+0
Change location of r8a7778.h so it can be included as "r8a7778.h" instead of the old style <mach/r8a7778.h> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-12ARM: shmobile: r8a7778: add USB Func DMAEngine supportKuninori Morimoto1-0/+2
HPB-DMAC has 2 channel for USB Func (= D0/D1) D0 is used as Tx, D1 is used as Rx on this patch Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-12ARM: shmobile: r8a7778: camera-rcar header cleanupKuninori Morimoto1-1/+0
<linux/platform_data/camera-rcar.h> is needed on BockW, not setup-r8a7778.c Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-11ARM: shmobile: r8a7778: add SSIx DMAEngine supportKuninori Morimoto1-0/+18
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: r8a7778: add HPBIFx DMAEngine supportKuninori Morimoto1-0/+18
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-11Merge tag 'soc-for-linus' of ↵Linus Torvalds1-0/+11
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "New and updated SoC support. Among the things new for this release are: - More support for the AM33xx platforms from TI - Tegra 124 support, and some updates to older tegra families as well - imx cleanups and updates across the board - A rename of Broadcom's Mobile platforms which were introduced as ARCH_BCM, and turned out to be too broad a name. New name is ARCH_BCM_MOBILE. - A whole bunch of updates and fixes for integrator, making the platform code more modern and switches over to DT-only booting. - Support for two new Renesas shmobile chipsets. Next up for them is more work on consolidation instead of introduction of new non-multiplatform SoCs, we're all looking forward to that! - Misc cleanups for older Samsung platforms, some Allwinner updates, etc" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (159 commits) ARM: bcm281xx: Add ARCH_BCM_MOBILE to bcm config ARM: bcm_defconfig: Run "make savedefconfig" ARM: bcm281xx: Add ARCH Timers to config rename ARCH_BCM to ARCH_BCM_MOBILE (mach-bcm) ARM: vexpress: Enable platform-specific options in defconfig ARM: vexpress: Make defconfig work again ARM: sunxi: remove .init_time hooks ARM: imx: enable suspend for imx6sl ARM: imx: ensure dsm_request signal is not asserted when setting LPM ARM: imx6q: call WB and RBC configuration from imx6q_pm_enter() ARM: imx6q: move low-power code out of clock driver ARM: imx: drop extern with function prototypes in common.h ARM: imx: reset core along with enable/disable operation ARM: imx: do not return from imx_cpu_die() call ARM: imx_v6_v7_defconfig: Select CONFIG_PROVE_LOCKING ARM: imx_v6_v7_defconfig: Enable LEDS_GPIO related options ARM: mxs_defconfig: Turn off CONFIG_DEBUG_GPIO ARM: imx: replace imx6q_restart() with mxc_restart() ARM: mach-imx: mm-imx5: Retrieve iomuxc base address from dt ARM: mach-imx: mm-imx5: Retrieve tzic base address from dt ...
2013-10-08ARM: shmobile: r8a7778: split r8a7778_init_irq_extpin() for DTKuninori Morimoto1-0/+1
r8a7778 INTC needs IRL pin mode settings to determine behavior of IRQ0 - IRQ3, and r8a7778_init_irq_extpin() is controlling it via irlm parameter. But this function registers renesas_intc_irqpin driver if irlm was set, and this value depends on platform. This is not good for DT. This patch splits r8a7778_init_irq_extpin() function into "mode settings" and "funtion register" parts. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: r8a7778: add HPB-DMAC supportMax Filippov1-0/+8
Add HPB-DMAC platform device on R8A7778 SoC along with its slave and channel configurations (only for SDHI0 so far). Signed-off-by: Max Filippov <max.filippov@cogentembedded.com> [Sergei: moved *enum* declaring HPB-DMAC slave IDs from now removed <mach/dma.h> to <mach/r8a7778.h>, removed #include <mach/dma.h> from setup-r8a7778.c, removed SSI-related *enum* values and SSI-related data from hpb_dmae_slaves[] and hpb_dmae_channels[], moved the comments after the element initializers of hpb_dmae_channels[].] Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: r8a7778: add usb phy power control functionKuninori Morimoto1-0/+2
USB phy initialisation function is needed from not only USB Host but also USB Function too. This patch adds usb phy common control function. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-26ARM: shmobile: r8a7778: cleanup registration of sh_ethKuninori Morimoto1-1/+0
sh_eth driver which needs platform data at the time of registration is used from BockW only. Now, ARM/shmobile aims to support DT, and the C code base board support will be removed if DT support is completed. Current driver registration method which needs platform data and which is not shared complicates codes. This means legacy C code cleanup after DT supporting will be more complicated This patch registers it on board code as cleanup C code Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-26ARM: shmobile: r8a7778: cleanup registration of vinKuninori Morimoto1-2/+0
vin driver which needs platform data at the time of registration is used from BockW only. Now, ARM/shmobile aims to support DT, and the C code base board support will be removed if DT support is completed. Current driver registration method which needs platform data and which is not shared complicates codes. This means legacy C code cleanup after DT supporting will be more complicated This patch registers it on board code as cleanup C code Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-09Merge tag 'renesas-for-linus' of ↵Linus Torvalds1-8/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM Renesas SoC cleanup, refactoring and more SMP support from Kevin Hilman: "Lots of cleanup and refactoring and some SMP additions for Renesas platforms. Due to some inter-dependencies with other arm-soc branches, this Renesas stuff was separated out for sending after the other branches were merged. Highlights: - remove unused board support and cleanup of unused headers - refactoring of init and device registration - simplify IRQ initialization" * tag 'renesas-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (68 commits) ARM: shmobile: Per-CPU SMP boot / sleep code for SCU SoCs ARM: shmobile: Introduce per-CPU SMP boot / sleep code ARM: shmobile: Use shared SCU CPU Hotplug code on r8a7779 ARM: shmobile: Use shared SCU CPU Hotplug code on sh73a0 ARM: shmobile: Add shared SCU CPU Hotplug code ARM: shmobile: Use shared SCU SMP boot code on emev2 ARM: shmobile: Use shared SCU SMP boot code on r8a7779 ARM: shmobile: Use shared SCU SMP boot code on sh73a0 ARM: shmobile: Introduce shared SCU SMP boot code ARM: shmobile: sh73a0: Remove global GPIO_NR definition ARM: shmobile: kzm9d: remove nfsroot settings from bootargs ARM: shmobile: armadillo800eva: remove nfsroot settings from bootargs ARM: shmobile: r8a7779: move r8a7779_init_irq_xxx() to setup ARM: shmobile: r8a7740: move r8a7740_init_irq_of() to setup ARM: shmobile: bockw: add missing __initdata ARM: shmobile: r8a7790: add missing __initdata ARM: shmobile: r8a7779: add missing __initdata ARM: shmobile: Remove unused shmobile_init_time() ARM: shmobile: Use clocksource_of_init() on r8a7790 ARM: shmobile: Use default ->init_time() on KZM9G DT ref ...
2013-09-06Merge tag 'cleanup-for-linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "This branch contains code cleanups, moves and removals for 3.12. There's a large number of various cleanups, and a nice net removal of 13500 lines of code. Highlights worth mentioning are: - A series of patches from Stephen Boyd removing the ARM local timer API. - Move of Qualcomm MSM IOMMU code to drivers/iommu. - Samsung PWM driver cleanups from Tomasz Figa, removing legacy PWM driver and switching over to the drivers/pwm one. - Removal of some unusued auto-generated headers for OMAP2+ (PRM/CM). There's also a move of a header file out of include/linux/i2c/ to platform_data, where it really belongs. It touches mostly ARM platform code for include changes so we took it through our tree" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits) ARM: OMAP2+: Add back the define for AM33XX_RST_GLOBAL_WARM_SW_MASK gpio: (gpio-pca953x) move header to linux/platform_data/ arm: zynq: hotplug: Remove unreachable code ARM: SAMSUNG: Remove unnecessary exynos4_default_sdhci*() tegra: simplify use of devm_ioremap_resource ARM: SAMSUNG: Remove plat/regs-timer.h header ARM: SAMSUNG: Remove remaining uses of plat/regs-timer.h header ARM: SAMSUNG: Remove pwm-clock infrastructure ARM: SAMSUNG: Remove old PWM timer platform devices pwm: Remove superseded pwm-samsung-legacy driver ARM: SAMSUNG: Modify board files to use new PWM platform device ARM: SAMSUNG: Rework private data handling in dev-backlight pwm: Add new pwm-samsung driver ARM: mach-mvebu: remove redundant DT parsing and validation ARM: msm: Only compile io.c on platforms that use it iommu/msm: Move mach includes to iommu directory ARM: msm: Remove devices-iommu.c ARM: msm: Move mach/board.h contents to common.h ARM: msm: Migrate msm_timer to CLOCKSOURCE_OF_DECLARE ARM: msm: Remove TMR and TMR0 static mappings ...
2013-08-24[media] ARM: shmobile: r8a7778: add VIN supportVladimir Barinov1-0/+3
Add VIN clocks and platform devices on R8A7778 SoC; add function to register the VIN platform devices. [Sergei: added 'id' parameter check to r8a7778_add_vin_device(), used '*pdata' in *sizeof* operator, and added an empty line there; renamed some variables, annotated 'vin[01]_info' and vin[01]_resources[] as '__initdata'.] Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-06ARM: shmobile: r8a7778: cleanup registration of hspiKuninori Morimoto1-1/+0
sh-hspi driver which doesn't need platform data at the time of registration can be registerd on SoC. And, registering these drivers in the SoC code can avoid unwanted device numbering issue. (ex. the hspi2 device number will be spi.0 if hspi2 only registered) This patch registers it on SoC code as cleanup C code Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-08-06ARM: shmobile: r8a7778: cleanup registration of i2cKuninori Morimoto1-1/+0
i2c-rcar driver which doesn't need platform data at the time of registration can be registerd on SoC. And, registering these drivers in the SoC code can avoid unwanted device numbering issue. (ex. the i2c3 device number will be i2c.0 if i2c3 only registered) This patch registers it on SoC code as cleanup C code Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-08-06ARM: shmobile: r8a7778: cleanup registration of sdhiKuninori Morimoto1-2/+0
sdhi driver which needs platform data at the time of registration is used from BockW only. Now, ARM/shmobile aims to support DT, and the C code base board support will be removed if DT support is completed. Current driver registration method which needs platform data and which is not shared complicates codes. This means legacy C code cleanup after DT supporting will be more complicated This patch registers it on board code as cleanup C code Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-08-06ARM: shmobile: r8a7778: cleanup registration of usb phyKuninori Morimoto1-2/+0
usb phy driver which needs platform data at the time of registration is used from BockW only. Now, ARM/shmobile aims to support DT, and the C code base board support will be removed if DT support is completed. Current driver registration method which needs platform data and which is not shared complicates codes. This means legacy C code cleanup after DT supporting will be more complicated This patch registers it on board code as cleanup C code Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-08-06ARM: shmobile: r8a7778: cleanup registration of mmcifKuninori Morimoto1-2/+0
sh_mmcif driver which needs platform data at the time of registration is used from BockW only. Now, ARM/shmobile aims to support DT, and the C code base board support will be removed if DT support is completed. Current driver registration method which needs platform data and which is not shared complicates codes. This means legacy C code cleanup after DT supporting will be more complicated This patch registers it on board code as cleanup C code Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-26ARM: shmobile: bockw: add DT referenceKuninori Morimoto1-0/+1
This patch adds a sample DT-based Bock-W "reference" implementation. The use of platform-specific C-code should be avoided with this configuration as much as possible. This patch adds new r8a7778_add_dt_devices() which was same stance of r8a7790_add_dt_devices() Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: r8a7778: remove r8a7778_init_irq()Kuninori Morimoto1-1/+0
This patch removes r8a7778_init_irq(), since no-one is using it. And now, there is no reason to have r8a7778_init_irq_common(). r8a7778_init_irq_dt() includes it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-14Merge tag 'renesas-soc2-for-v3.11' of ↵Olof Johansson1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc From Simon Horman: Second Round of Renesas ARM-based SoC updates for v3.11 * Ether device name updates for r8a7778 and r8a7779 Sergei Shtylyov * Extended clock and driver coverage for r8a7778 by Goda-san and Morimoto-san * Extended clock and coverage for r8a73a4 and r8a7790 by Guennadi Liakhovetski * HSCIF support for r8a7790 by Ulrich Hecht * tag 'renesas-soc2-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: r8a7790: add clock definitions and aliases for MMCIF and SDHI ARM: shmobile: r8a73a4: add clock definitions and aliases for MMCIF and SDHI ARM: shmobile: r8a7778: add support MMC driver ARM: shmobile: r8a7778: add support HSPI driver ARM: shmobile: r8a7778: add support I2C driver ARM: shmobile: r8a7778: add support MMC clock ARM: shmobile: r8a7778: add support HSPI clock ARM: shmobile: r8a7778: add support I2C clock ARM: shmobile: r8a7790: HSCIF support ARM: shmobile: r8a7778: fix Ether device name ARM: shmobile: r8a7779: fix Ether device name Signed-off-by: Olof Johansson <olof@lixom.net> Conflicts: arch/arm/mach-shmobile/clock-r8a7778.c arch/arm/mach-shmobile/include/mach/r8a7778.h
2013-06-11ARM: shmobile: r8a7778: add support MMC driverKuninori Morimoto1-0/+2
Add a platform device for the r8a7778 MMC. Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-11ARM: shmobile: r8a7778: add support HSPI driverKuninori Morimoto1-0/+1
Add a platform device for the r8a7778 HSPI. Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-11ARM: shmobile: r8a7778: add support I2C driverKuninori Morimoto1-0/+2
Add a platform device for the r8a7778 I2C. Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-11ARM: shmobile: r8a7778: add USB supportSergei Shtylyov1-0/+3
Add USB clock and EHCI, OHCI, and USB PHY platform devices for R8A7778 SoC; add a function to register PHY device with board-specific platform data and register EHCI and OHCI platfrom devices from the init_late() board method. Also, don't forget to enable CONFIG_ARCH_HAS_[EO]HCI options for R8A7778 SoC in Kconfig... The patch has been tested on the BOCK-W board. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-11Merge branches 'heads/pinmux' and 'heads/soc' into phy-rcar-usb-baseSimon Horman1-0/+2
This branch acts as a base for adding USB support to r8A7778/BOCK-W and r8A7779/Marzen. It includes the soc branch to provide dependencies in the r8A7778 clock code. It includes pinmux to provide pinmux initialisation for Bock-W which is a dependency. Conflicts: arch/arm/mach-shmobile/Kconfig arch/arm/mach-shmobile/include/mach/r8a7778.h arch/arm/mach-shmobile/setup-r8a7778.c
2013-06-07ARM: shmobile: r8a7778: Register SDHI deviceKuninori Morimoto1-0/+2
This patch adds SDHI register function which needs id number (= 0/1/2) Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04ARM: shmobile: r8a7778: Register PFC deviceKuninori Morimoto1-0/+1
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-05ARM: shmobile: R8A7778: add Ether supportSergei Shtylyov1-0/+3
Add Ether clock and platform device for R8A7778 SoC; add a function to register this device with board-specific platform data. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-04ARM: shmobile: r8a7778: add r8a7778_init_irq_extpin()Kuninori Morimoto1-0/+1
This patch adds r8a7778_init_irq_extpin() for IRQ0 - IRQ3. But this patch doesn't enable DT settings on r8a7778.dts, because R8A7778 chip external IRQ depends on IRQ0 - IRQ3 pin encoding which came from platform board implementation. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-02ARM: shmobile: add R8A7778 basis supportKuninori Morimoto1-0/+28
Add initial support for the R8A7778 R-Car M1A SoC. No static virtual mappings are used, all the components make use of ioremap(). DT_MACHINE_START is still wrapped in CONFIG_USE_OF to match other mach-shmobile code. It is based on v1.0 datasheet Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 10:26:54 +0000