summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-s5pv210
AgeCommit message (Collapse)AuthorFilesLines
2017-02-28Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds1-1/+1
Pull ARM updates from Russell King: - nommu updates from Afzal Mohammed cleaning up the vectors support - allow DMA memory "mapping" for nommu Benjamin Gaignard - fixing a correctness issue with R_ARM_PREL31 relocations in the module linker - add strlen() prototype for the decompressor - support for DEBUG_VIRTUAL from Florian Fainelli - adjusting memory bounds after memory reservations have been registered - unipher cache handling updates from Masahiro Yamada - initrd and Thumb Kconfig cleanups * 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (23 commits) ARM: mm: round the initrd reservation to page boundaries ARM: mm: clean up initrd initialisation ARM: mm: move initrd init code out of arm_memblock_init() ARM: 8655/1: improve NOMMU definition of pgprot_*() ARM: 8654/1: decompressor: add strlen prototype ARM: 8652/1: cache-uniphier: clean up active way setup code ARM: 8651/1: cache-uniphier: include <linux/errno.h> instead of <linux/types.h> ARM: 8650/1: module: handle negative R_ARM_PREL31 addends correctly ARM: 8649/2: nommu: remove Hivecs configuration is asm ARM: 8648/2: nommu: display vectors base ARM: 8647/2: nommu: dynamic exception base address setting ARM: 8646/1: mmu: decouple VECTORS_BASE from Kconfig ARM: 8644/1: Reduce "CPU: shutdown" message to debug level ARM: 8641/1: treewide: Replace uses of virt_to_phys with __pa_symbol ARM: 8640/1: Add support for CONFIG_DEBUG_VIRTUAL ARM: 8639/1: Define KERNEL_START and KERNEL_END ARM: 8638/1: mtd: lart: Rename partition defines to be prefixed with PART_ ARM: 8637/1: Adjust memory boundaries after reservations ARM: 8636/1: Cleanup sanity_check_meminfo ARM: add CPU_THUMB_CAPABLE to indicate possible Thumb support ...
2017-02-28ARM: 8641/1: treewide: Replace uses of virt_to_phys with __pa_symbolFlorian Fainelli1-1/+1
All low-level PM/SMP code using virt_to_phys() should actually use __pa_symbol() against kernel symbols. Update code where relevant to move away from virt_to_phys(). Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2017-01-26pinctrl: samsung: Move retention control from mach-s5pv210 to the pinctrl driverMarek Szyprowski2-11/+0
This patch moves pad retention control from S5PV210 machine code to Exynos pin controller driver. This helps to avoid possible ordering and logical dependencies between machine and pin control code. Till now it worked fine only because sys_ops for machine code and pin controller were called in registration order. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Tomasz Figa <tomasz.figa@gmail.com> For mach-s5pv210: Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-10ARM: don't include removed directoriesArnd Bergmann1-1/+1
Three platforms used to have header files in include/mach that are now all gone, but the removed directories are still being included, which leads to -Wmissing-include-dirs warnings. This removes the extra -I flags. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-06-03ARM: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIBLinus Walleij1-1/+1
This replaces: - "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB" as this can now be selected directly. - "select ARCH_WANT_OPTIONAL_GPIOLIB" with no dependency: GPIOLIB is now selectable by everyone, so we need not declare our intent to select it. When ordering the symbols the following rationale was used: if the selects were in alphabetical order, I moved select GPIOLIB to be in alphabetical order, but if the selects were not maintained in alphabetical order, I just replaced "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB". Cc: Michael Büsch <m@bues.ch> Cc: arm@kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-01ARM: use "depends on" for SoC configs instead of "if" after promptMasahiro Yamada1-1/+2
Many ARM sub-architectures use prompts followed by "if" conditional, but it is wrong. Please notice the difference between config ARCH_FOO bool "Foo SoCs" if ARCH_MULTI_V7 and config ARCH_FOO bool "Foo SoCs" depends on ARCH_MULTI_V7 These two are *not* equivalent! In the former statement, it is not ARCH_FOO, but its prompt that depends on ARCH_MULTI_V7. So, it is completely valid that ARCH_FOO is selected by another, but ARCH_MULTI_V7 is still disabled. As it is not unmet dependency, Kconfig never warns. This is probably not what you want. The former should be used only when you need to do so, and you really understand what you are doing. (In most cases, it should be wrong!) For enabling/disabling sub-architectures, the latter is always correct. As a good side effect, this commit fixes some entries over 80 columns (mach-imx, mach-integrator, mach-mbevu). [Arnd: I note that there is not really a bug here, according to the discussion that followed, but I can see value in being consistent and in making the lines shorter] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Jun Nie <jun.nie@linaro.org> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Krzysztof Halasa <khc@piap.pl> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-03-29ARM: 8326/1: s5pv210: move resume code to .text sectionArd Biesheuvel1-1/+1
This code calls cpu_resume() using a straight branch (b), so now that we have moved cpu_resume() back to .text, this should be moved there as well. Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-02-19ARM: make arrays containing machine compatible strings constUwe Kleine-König1-1/+1
The definition static const char *axxia_dt_match[] __initconst = { ... defines a changable array of constant strings. That is you must not do: *axxia_dt_match[0] = 'k'; but axxia_dt_match[0] = "different string"; is fine. So the annotation __initconst is wrong and yields a compiler error when other really const variables are added with __initconst. As the struct machine_desc member dt_compat is declared as const char *const *dt_compat; making the arrays const is the better alternative over changing all annotations to __initdata. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-10-14Merge branch 'kbuild' of ↵Linus Torvalds1-5/+0
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild changes from Michal Marek: - fix for handling dependencies of *-objs targets by Masahiro Yamada - lots of cleanups in the kbuild machinery, also by Masahiro - fixes for the kconfig build to use an UTF-8 capable ncurses library if possible and to build on not-so-standard installs - some more minor fixes * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kbuild: Do not reference *-n variables in the Makefile kbuild: simplify build, clean, modbuiltin shorthands kbuild: arm: Do not define "comma" twice kbuild: remove obj-n and lib-n handling kbuild: remove unnecessary variable initializaions kbuild: remove unnecessary "obj- := dummy.o" trick kbuild: handle C=... and M=... after entering into build directory kbuild: use $(Q) for sub-make target kbuild: fake the "Entering directory ..." message more simply kconfig/lxdialog: get ncurses CFLAGS with pkg-config kconfig: nconfig: fix multi-byte UTF handling kconfig: lxdialog: fix spelling kbuild: Make scripts executable kbuild: remove redundant clean-files from scripts/kconfig/Makefile kbuild: refactor script/kconfig/Makefile kbuild: handle the dependency of multi-objs hostprogs appropriately kbuild: handle multi-objs dependency appropriately
2014-10-02kbuild: remove unnecessary variable initializaionsMasahiro Yamada1-5/+0
Clearing obj-y, obj-m, obj-n, obj- in each Makefile is a useless habit. They are non-exported variables; therefore they are always empty whenever descending into each subdirectory. (Moreorver, obj-y and obj-m are also set to empty at the beginning of scripts/Makefile.build) Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Peter Foley <pefoley2@pefoley.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-08-18ARM: S5PV210: move <mach/regs-clock.h> into mach-s5pv210/Kukjin Kim3-5/+3
This moves <mach/regs-clock.h> into mach-s5pv210 so no more include/mach/ under mach-s5pv210. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Tomasz Figa <t.figa@samsung.com>
2014-07-19ARM: SAMSUNG: Remove remaining legacy codeTomasz Figa11-642/+1
After refactoring suspend/resume, which was last part with dependencies on legacy code, all Kconfig symbols related to Samsung ATAGS support can be deselected and more unused code removed. This includes most of s5p-* code as well, as s5pv210 was their last user. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-19ARM: S5PV210: Enable multi-platform build supportTomasz Figa3-26/+19
This makes it possible to enable the s5pv210 platform as part of a multiplatform kernel. Also redundant Kconfig options are removed. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-19ARM: S5PV210: Register cpufreq platform deviceTomasz Figa1-0/+1
Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-19ARM: S5PV210: move debug-macro.S into the common spaceTomasz Figa1-41/+0
Move debug-macro.S from mach/include to include/debug where all other common debug macros are. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-19ARM: S5PV210: Untie PM support from legacy codeTomasz Figa6-15/+141
This patch makes S5PV210 not rely on legacy suspend helpers in plat-samsung and implements platform suspend logic locally, similarly to Exynos. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-19ARM: S5PV210: Remove support for board filesTomasz Figa22-3563/+8
Since all in-tree boards have been moved to device tree, we can now drop legacy code and make mach-s5pv210 DT-only. This patch does it. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-19ARM: S5PV210: Add board file for boot using Device TreeMateusz Krawczuk3-1/+83
This patch adds board file that will be used to boot S5PV210/S5PC110-based boards using Device Tree. Signed-off-by: Mateusz Krawczuk <m.krawczuk@partner.samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [t.figa: Rebased and cleaned-up a bit.] Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-19ARM: SAMSUNG: Remove legacy clock codeTomasz Figa8-1446/+1
Since S5PV210 now has a complete clock driver using Common Clock Framework, there is no reason to keep the old code. Remove it together with the whole legacy Samsung-specific clock framework which no longer has any users. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-19ARM: S5PV210: Migrate clock handling to Common Clock FrameworkMateusz Krawczuk6-4/+38
This patch migrates the s5pv210 platform to use new clock driver using Common Clock Framework. Signed-off-by: Mateusz Krawczuk <m.krawczuk@partner.samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [t.figa: Rebased and fixed merge conflicts.] Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-06-17ARM: samsung: make SAMSUNG_DMADEV optionalArnd Bergmann1-1/+2
The only remaining driver using the samsung dmadev code is the broken samsung-ac97 sound driver. However, as found by Russell's autobuilder, the elaborate dependency chains around it cause problems with circular dependencies. This is an attempt to simplify those dependencies by making the SAMSUNG_DMADEV option user-selectable. I also try to keep the default settings for all related options unchanged, so we don't introduce any regressions against earlier testing on linux-next. In particular, all s3c64xx and s5p* platforms keep selecting the pl330 and pl08x drivers they require, but the select statement is now moved towards the main platform option, and it remains optional by unselecting CONFIG_DMADEVICES. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Kukjin Kim <kgene.kim@samsung.com>
2014-06-09Merge branch 'for-linus' of ↵Linus Torvalds1-8/+0
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "A big update to the Atmel touchscreen driver, devm support for polled input devices, several drivers have been converted to using managed resources, and assorted driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (87 commits) Input: synaptics - fix resolution for manually provided min/max Input: atmel_mxt_ts - fix invalid return from mxt_get_bootloader_version Input: max8997_haptic - add error handling for regulator and pwm Input: elantech - don't set bit 1 of reg_10 when the no_hw_res quirk is set Input: elantech - deal with clickpads reporting right button events Input: edt-ft5x06 - fix an i2c write for M09 support Input: omap-keypad - remove platform data support ARM: OMAP2+: remove unused omap4-keypad file and code Input: ab8500-ponkey - switch to using managed resources Input: max8925_onkey - switch to using managed resources Input: 88pm860x-ts - switch to using managed resources Input: 88pm860x_onkey - switch to using managed resources Input: intel-mid-touch - switch to using managed resources Input: wacom - process outbound for newer Cintiqs Input: wacom - set stylus_in_proximity when pen is in range DTS: ARM: OMAP3-N900: Add tsc2005 support Input: tsc2005 - add DT support Input: add common DT binding for touchscreens Input: jornada680_kbd - switch top using managed resources Input: adp5520-keys - switch to using managed resources ...
2014-05-26Input: atmel_mxt_ts - read screen config from chipNick Dyer1-3/+0
By reading the touchscreen configuration from the settings that the maXTouch chip is actually using, we can remove some platform data. The matrix size is not used for anything, and results in some rather confusing code to re-read it because it may change when configuration is downloaded, so don't print it out. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-23[media] ARM: S5PV210: Remove camera support from mach-goni.cSylwester Nawrocki1-51/+0
S5PV210 is going to get DT support, so we can remove the camera bits from the only board using camera on S5PV210. This allows to clean the exynos4-is driver by dropping code for non-dt platforms. This patch can be dropped if a patch removing the whole board file is applied first. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-18Input: atmel_mxt_ts - remove unnecessary platform dataNick Dyer1-5/+0
It is not necessary to download these values to the maXTouch chip on every probe, since they are stored in NVRAM. It makes life difficult when tuning the device to keep them in sync with the config array/file, and requires a new kernel build for minor tweaks. These parameters only represent a tiny subset of the available configuration options, tracking all of these options in platform data would be a endless task. In addition, different versions of maXTouch chips may have these values in different places or may not even have them at all. Having these values also makes life more complex for device tree and other platforms where having to define a static configuration isn't helpful. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-04-05Merge tag 'tags/cleanup2-3.15' of ↵Linus Torvalds1-28/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late cleanups from Arnd Bergmann: "These could not be part of the first cleanup branch, because they either came too late in the cycle, or they have dependencies on other branches. Important changes are: - The integrator platform is almost multiplatform capable after some reorganization (Linus Walleij) - Minor cleanups on Zynq (Michal Simek) - Lots of changes for Exynos and other Samsung platforms, including further preparations for multiplatform support and the clocks bindings are rearranged" * tag 'tags/cleanup2-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) devicetree: fix newly added exynos sata bindings ARM: EXYNOS: Fix compilation error in cpuidle.c ARM: S5P64X0: Explicitly include linux/serial_s3c.h in mach/pm-core.h ARM: EXYNOS: Remove hardware.h file ARM: SAMSUNG: Remove hardware.h inclusion ARM: S3C24XX: Remove invalid code from hardware.h dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock ARM: dts: Keep some essential LDOs enabled for arndale-octa board ARM: dts: Disable MDMA1 node for arndale-octa board ARM: S3C64XX: Fix build for implicit serial_s3c.h inclusion serial: s3c: Fix build of header without serial_core.h preinclusion ARM: EXYNOS: Allow wake-up using GIC interrupts ARM: EXYNOS: Stop using legacy Samsung PM code ARM: EXYNOS: Remove PM initcalls and useless indirection ARM: EXYNOS: Fix abuse of CONFIG_PM ARM: SAMSUNG: Move s3c_pm_check_* prototypes to plat/pm-common.h ARM: SAMSUNG: Move common save/restore helpers to separate file ARM: SAMSUNG: Move Samsung PM debug code into separate file ARM: SAMSUNG: Consolidate PM debug functions ARM: SAMSUNG: Use debug_ll_addr() to get UART base address ...
2014-04-05Merge tag 'cleanup-3.15' of ↵Linus Torvalds8-36/+7
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Arnd Bergmann: "These cleanup patches are mainly move stuff around and should all be harmless. They are mainly split out so that other branches can be based on top to avoid conflicts. Notable changes are: - We finally remove all mach/timex.h, after CLOCK_TICK_RATE is no longer used (Uwe Kleine-König) - The Qualcomm MSM platform is split out into legacy mach-msm and new-style mach-qcom, to allow easier maintainance of the new hardware support without regressions (Kumar Gala) - A rework of some of the Kconfig logic to simplify multiplatform support (Rob Herring) - Samsung Exynos gets closer to supporting multiplatform (Sachin Kamat and others) - mach-bcm3528 gets merged into mach-bcm (Stephen Warren) - at91 gains some common clock framework support (Alexandre Belloni, Jean-Jacques Hiblot and other French people)" * tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (89 commits) ARM: hisi: select HAVE_ARM_SCU only for SMP ARM: efm32: allow uncompress debug output ARM: prima2: build reset code standalone ARM: at91: add PWM clock ARM: at91: move sam9261 SoC to common clk ARM: at91: prepare common clk transition for sam9261 SoC ARM: at91: updated the at91_dt_defconfig with support for the ADS7846 ARM: at91: dt: sam9261: Device Tree support for the at91sam9261ek ARM: at91: dt: defconfig: Added the sam9261 to the list of DT-enabled SOCs ARM: at91: dt: Add at91sam9261 dt SoC support ARM: at91: switch sam9rl to common clock framework ARM: at91/dt: define main clk frequency of at91sam9rlek ARM: at91/dt: define at91sam9rl clocks ARM: at91: prepare common clk transition for sam9rl SoCs ARM: at91: prepare sam9 dt boards transition to common clk ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs ARM: at91: Add at91sam9rl DT SoC support ARM: at91: prepare at91sam9rl DT transition ARM: at91/defconfig: refresh at91sam9260_9g20_defconfig ...
2014-03-21ARM: s5pv210: enable IDE support in MACH_TORBRECKArnd Bergmann1-0/+1
Building MACH_TORBRECK by itself results in a build error because we try to reference the s3c_device_cfcon definition that is hidden inside CONFIG_SAMSUNG_DEV_IDE. This changes the Kconfig logic to ensure that option is enabled when we need it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org>
2014-03-11ARM: SAMSUNG: remove all custom uncompress.hHeiko Stuebner1-28/+0
All Samsung platforms now use the generic uncompress.h so all the custom ones can be removed. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-03-09Merge tag 'samsung-cleanup' of ↵Olof Johansson7-7/+7
http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup Samsung cleanup for v3.15 from Kukjin Kim: - Use generic uncompress.h for exynos and remove exynos <mach/uncompress.h> accordingly (other uncompress.h files will be removed) - move <plat/rtc-core.h> into s3c24xx <mach/rtc-core.h> - remove unused header files - cleanup exynos related non-DT stuffs - use inclusion <linux/serial_s3c.h> instead of <plat/regs-serial.h> - remove unneeded Kconfig entries: S3C24XX_GPIO_EXTRA64 and S3C24XX_GPIO_EXTRA128 - remove unneeded function s3c24xx_init_cpu() - remove obsolete s3c24xx <mach/tick.h> * tag 'samsung-cleanup' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Remove uncompress.h ARM: debug: Use generic uncompress.h for exynos ARM: S3C24XX: Move rtc-core.h from plat to mach ARM: EXYNOS: Remove unused header file from pm_domains.c ARM: SAMSUNG: Remove Exynos specific code from devs, s5p-pm-irq and pm-gpio.c ARM: SAMSUNG: Delete unused plat/regs-serial.h header file ARM: SAMSUNG: Replace inclusion of plat/regs-serial.h header file ARM: SAMSUNG: Remove platform dependency from samsung.S ARM: S3C24XX: get rid of unneeded selects ARM: SAMSUNG: remove unneeded s3c24xx_init_cpu() ARM: SAMSUNG: remove obsolete tick.h Signed-off-by: Olof Johansson <olof@lixom.net>
2014-02-14ARM: SAMSUNG: Replace inclusion of plat/regs-serial.h header fileTushar Behera7-7/+7
regs-serial.h only includes linux/serial_s3c.h. Include this header directly to remove unnecessary platform dependency. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> [broonie@linaro.org: Acked for S3C64XX related changes] Acked-by: Mark Brown <broonie@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-12-20ARM: drop <mach/timex.h> for !ARCH_MULTIPLATFORM, tooUwe Kleine-König1-29/+0
While <mach/timex.h> isn't used for multi-platform builds since long it still is for "normal" builds. As the previous patches fix all sites to not make use of this per-platform file, it can go now for good also for platforms that are not (yet) converted to multi-platform. While at it there are no users of CLOCK_TICK_RATE any more, so also drop the dummy #define. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2013-11-16Merge tag 'pwm/for-3.13-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm changes from Thierry Reding: "Mostly bug fixes and clean up. There is a new driver, which is actually moving a custom PWM driver from drivers/misc. The majority of the patches are enhancements to the device tree support in the pwm-backlight driver. Backlights can now additionally be powered using a regulator and enabled using a GPIO in addition to just the PWM input" * tag 'pwm/for-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (30 commits) Documentation/pwm: Update supported SoC name for pwm-samsung pwm: samsung: Fix kernel warning while unexporting a channel MAINTAINERS: Move PWM subsystem tree to kernel.org Documentation/pwm: Fix trivial typos pwm-backlight: Remove unused variable pwm_backlight: avoid short blank screen while doing hibernation pwm-backlight: Fix brightness adjustment pwm: add ep93xx PWM support pwm-backlight: Allow for non-increasing brightness levels pwm-backlight: Add power supply support pwm-backlight: Use new enable_gpio field unicore32: Initialize PWM backlight enable_gpio field ARM: shmobile: Initialize PWM backlight enable_gpio field ARM: SAMSUNG: Initialize PWM backlight enable_gpio field ARM: pxa: Initialize PWM backlight enable_gpio field ARM: OMAP: Initialize PWM backlight enable_gpio field pwm-backlight: Add optional enable GPIO pwm-backlight: Track enable state pwm-backlight: Refactor backlight power on/off pwm-backlight: Improve readability ...
2013-10-16ARM: Samsung: Remove the MIPI PHY setup codeSylwester Nawrocki1-4/+0
Generic PHY drivers are used to handle the MIPI CSIS and MIPI DSIM DPHYs so we can remove now unused code at arch/arm/plat-samsung. In case there is any board file for S5PV210 platforms using MIPI CSIS/DSIM (not any upstream currently) it should use the generic PHY API to bind the PHYs to respective PHY consumer drivers and a platform device for the PHY provider should be defined. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-16ARM: SAMSUNG: Initialize PWM backlight enable_gpio fieldThierry Reding1-0/+1
The GPIO API defines 0 as being a valid GPIO number, so this field needs to be initialized explicitly. Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-08-12ARM: SAMSUNG: Remove remaining uses of plat/regs-timer.h headerTomasz Figa1-10/+0
This patch removes remaining inclusions of plat/regs-timer.h as a preparation to remove the header. As a part of this, things like save and restore of PWM registers are removed from SoC-specific code, because it is handled in appropriate drivers now. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Mark Brown <broonie@linaro.org> Tested-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-08-12ARM: SAMSUNG: Remove pwm-clock infrastructureTomasz Figa1-1/+0
Since all the used PWM prescalers and dividers configuration has been moved to appropriate drivers, the pwm-clock infrastructure is now unused and so this patch removes it. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Mark Brown <broonie@linaro.org> Tested-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-08-12ARM: SAMSUNG: Modify board files to use new PWM platform deviceTomasz Figa1-2/+3
This patch modifies any board files using the legacy PWM device to use the new device instead. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Mark Brown <broonie@linaro.org> Tested-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-08-06ARM: SAMSUNG: Remove unused PWM timer IRQ chip codeTomasz Figa1-2/+0
As the need for an IRQ chip handling PWM timer interrupt chaining is gone now, this patch removes all the code made unnecessary. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Mark Brown <broonie@linaro.org> Tested-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-08-06ARM: SAMSUNG: Move all platforms to new clocksource driverTomasz Figa2-1/+17
This patch moves all Samsung platforms using PWM clocksource from legacy samsung-time to new samsung-pwm-timer driver. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Mark Brown <broonie@linaro.org> Tested-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-08-06ARM: SAMSUNG: Set PWM platform dataTomasz Figa1-0/+11
This patch adds PWM platform data needed for legacy (non-DT) platforms to handle SoC-specific bits of the PWM/timer block. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Mark Brown <broonie@linaro.org> Tested-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-08-06ARM: SAMSUNG: Unify base address definitions of timer blockTomasz Figa1-0/+1
This patch makes all defintions of timer block base address use the same prefix to allow using the common name to define platform device resource. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Mark Brown <broonie@linaro.org> Tested-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-07-10Merge tag 'mfd-3.11-1' of ↵Linus Torvalds2-12/+4
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next Pull MFD update from Samuel Ortiz: "For the 3.11 merge we only have one new MFD driver for the Kontron PLD. But we also have: - Support for the TPS659038 PMIC from the palmas driver. - Intel's Coleto Creek and Avoton SoCs support from the lpc_ich driver. - RTL8411B support from the rtsx driver. - More DT support for the Arizona, max8998, twl4030-power and the ti_am335x_tsadc drivers. - The SSBI driver move under MFD. - A conversion to the devm_* API for most of the MFD drivers. - The twl4030-power got split from twl-core into its own module. - A major ti_am335x_adc cleanup, leading to a proper DT support. - Our regular arizona and wm* updates and cleanups from the Wolfson folks. - A better error handling and initialization, and a regulator subdevice addition for the 88pm80x driver. - A bulk platform_set_drvdata() call removal that's no longer need since commit 0998d0631001 ("device-core: Ensure drvdata = NULL when no driver is bound") * tag 'mfd-3.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next: (102 commits) mfd: sec: Provide max_register to regmap mfd: wm8994: Remove duplicate check for active JACKDET MAINTAINERS: Add include directory to MFD file patterns mfd: sec: Remove fields not used since regmap conversion watchdog: Kontron PLD watchdog timer driver mfd: max8998: Add support for Device Tree regulator: max8998: Use arrays for specifying voltages in platform data mfd: max8998: Add irq domain support regulator: palmas: Add TPS659038 support mfd: Kontron PLD mfd driver mfd: palmas: Add TPS659038 PMIC support mfd: palmas: Add SMPS10_BOOST feature mfd: palmas: Check if irq is valid mfd: lpc_ich: iTCO_wdt patch for Intel Coleto Creek DeviceIDs mfd: twl-core: Change TWL6025 references to TWL6032 mfd: davinci_voicecodec: Fix build breakage mfd: vexpress: Make the driver optional for arm and arm64 mfd: htc-egpio: Use devm_ioremap_nocache() instead of ioremap_nocache() mfd: davinci_voicecodec: Convert to use devm_* APIs mfd: twl4030-power: Fix relocking on error ...
2013-07-09reboot: arm: change reboot_mode to use enum reboot_modeRobin Holt2-2/+4
Preparing to move the parsing of reboot= to generic kernel code forces the change in reboot_mode handling to use the enum. [akpm@linux-foundation.org: fix arch/arm/mach-socfpga/socfpga.c] Signed-off-by: Robin Holt <holt@sgi.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Russ Anderson <rja@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-30regulator: max8998: Use arrays for specifying voltages in platform dataTomasz Figa2-12/+4
This patch modifies the platform data of max8998 to use arrays for specifying predefined voltages of buck1 and buck2 instead of separate field for each voltage. This allows to simplify the code a bit and will help in adding support for Device Tree, which will be introduced in further patch. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Mark Brown <broonie@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-19ARM: SAMSUNG: Consolidate uncompress subroutineTushar Behera1-0/+2
For mach-exynos, uart_base is a pointer and the value is calculated in the machine folder. For other machines, uart_base is defined as a macro in platform directory. For symmetry, the uart_base macro definition is removed and the uart_base calculation is moved to specific machine folders. This would help us consolidating uncompress subroutine for s5p64x0. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-04Merge tag 'drivers-for-linus' of ↵Linus Torvalds6-16/+16
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver changes from Olof Johansson: "This is a rather large set of patches for device drivers that for one reason or another the subsystem maintainer preferred to get merged through the arm-soc tree. There are both new drivers as well as existing drivers that are getting converted from platform-specific code into standalone drivers using the appropriate subsystem specific interfaces. In particular, we can now have pinctrl, clk, clksource and irqchip drivers in one file per driver, without the need to call into platform specific interface, or to get called from platform specific code, as long as all information about the hardware is provided through a device tree. Most of the drivers we touch this time are for clocksource. Since now most of them are part of drivers/clocksource, I expect that we won't have to touch these again from arm-soc and can let the clocksource maintainers take care of these in the future. Another larger part of this series is specific to the exynos platform, which is seeing some significant effort in upstreaming and modernization of its device drivers this time around, which unfortunately is also the cause for the churn and a lot of the merge conflicts. There is one new subsystem that gets merged as part of this series: the reset controller interface, which is a very simple interface for taking devices on the SoC out of reset or back into reset. Patches to use this interface on i.MX follow later in this merge window, and we are going to have other platforms (at least tegra and sirf) get converted in 3.11. This will let us get rid of platform specific callbacks in a number of platform independent device drivers." * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (256 commits) irqchip: s3c24xx: add missing __init annotations ARM: dts: Disable the RTC by default on exynos5 clk: exynos5250: Fix parent clock for sclk_mmc{0,1,2,3} ARM: exynos: restore mach/regs-clock.h for exynos5 clocksource: exynos_mct: fix build error on non-DT pinctrl: vt8500: wmt: Fix checking return value of pinctrl_register() irqchip: vt8500: Convert arch-vt8500 to new irqchip infrastructure reset: NULL deref on allocation failure reset: Add reset controller API dt: describe base reset signal binding ARM: EXYNOS: Add arm-pmu DT binding for exynos421x ARM: EXYNOS: Add arm-pmu DT binding for exynos5250 ARM: EXYNOS: Enable PMUs for exynos4 irqchip: exynos-combiner: Correct combined IRQs for exynos4 irqchip: exynos-combiner: Add set_irq_affinity function for combiner_irq ARM: EXYNOS: fix compilation error introduced due to common clock migration clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3} clk: exynos4: export clocks required for fimc-is clk: samsung: Fix compilation error clk: tegra: fix enum tegra114_clk to match binding ...
2013-05-02Merge tag 'multiplatform-for-linus' of ↵Linus Torvalds2-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC multiplatform updates from Olof Johansson: "More multiplatform enablement for ARM platforms. The ones converted in this branch are: - bcm2835 - cns3xxx - sirf - nomadik - msx - spear - tegra - ux500 We're getting close to having most of them converted! One of the larger platforms remaining is Samsung Exynos, and there are a bunch of supporting patches in this merge window for it. There was a patch in this branch to a early version of multiplatform conversion, but it ended up being reverted due to need of more bake time. The revert commit is part of the branch since it would have required rebasing multiple dependent branches and they were stable by then" * tag 'multiplatform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (70 commits) mmc: sdhci-s3c: Fix operation on non-single image Samsung platforms clocksource: nomadik-mtu: fix up clocksource/timer Revert "ARM: exynos: enable multiplatform support" ARM: SPEAr13xx: Fix typo "ARCH_HAVE_CPUFREQ" ARM: exynos: enable multiplatform support rtc: s3c: make header file local mtd: onenand/samsung: make regs-onenand.h file local thermal/exynos: remove unnecessary header inclusions mmc: sdhci-s3c: remove platform dependencies ARM: samsung: move mfc device definition to s5p-dev-mfc.c ARM: exynos: move debug-macro.S to include/debug/ ARM: exynos: prepare for sparse IRQ ARM: exynos: introduce EXYNOS_ATAGS symbol ARM: tegra: build assembly files with -march=armv7-a ARM: Push selects for TWD/SCU into machine entries ARM: ux500: build hotplug.o for ARMv7-a ARM: ux500: move to multiplatform ARM: ux500: make remaining headers local ARM: ux500: make irqs.h local to platform ARM: ux500: get rid of <mach/[hardware|db8500-regs].h> ...
2013-05-02Merge tag 'cleanup-for-linus' of ↵Linus Torvalds1-9/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanup from Olof Johansson: "Here is a collection of cleanup patches. Among the pieces that stand out are: - The deletion of h720x platforms - Split of at91 non-dt platforms to their own Kconfig file to keep them separate - General cleanups and refactoring of i.MX and MXS platforms - Some restructuring of clock tables for OMAP - Convertion of PMC driver for Tegra to dt-only - Some renames of sunxi -> sun4i (Allwinner A10) - ... plus a bunch of other stuff that I haven't mentioned" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (119 commits) ARM: i.MX: remove unused ARCH_* configs ARM i.MX53: remove platform ahci support ARM: sunxi: Rework the restart code irqchip: sunxi: Rename sunxi to sun4i irqchip: sunxi: Make use of the IRQCHIP_DECLARE macro clocksource: sunxi: Rename sunxi to sun4i clocksource: sunxi: make use of CLKSRC_OF clocksource: sunxi: Cleanup the timer code ARM: at91: remove trailing semicolon from macros ARM: at91/setup: fix trivial typos ARM: EXYNOS: remove "config EXYNOS_DEV_DRM" ARM: EXYNOS: change the name of USB ohci header ARM: SAMSUNG: Remove unnecessary code for dma ARM: S3C24XX: Remove unused GPIO drive strength register definitions ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2412 ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2410 ARM: S3C24XX: Removed unneeded dependency on ARCH_S3C24XX for boards ARM: SAMSUNG: Fix typo "CONFIG_SAMSUNG_DEV_RTC" ARM: S5P64X0: Fix typo "CONFIG_S5P64X0_SETUP_SDHCI" ...
2013-04-19Merge branch 'samsung/exynos-multiplatform' into next/driversArnd Bergmann2-2/+1
Merging this into the next/drivers branch avoids a number of pointless conflicts with code changed here. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-25 12:51:25 +0000