summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-realview/include
AgeCommit message (Collapse)AuthorFilesLines
2012-02-07Merge tag 'v3.3-rc2' into depends/rmk/for-armsocOlof Johansson2-8/+12
There were conflicts between fixes going in after 3.3-rc1 and Russell's stable arm-soc base branch. Resolving it in the dependency branch so that each topic branch shares the same resolution. Conflicts: arch/arm/mach-at91/at91cap9.c arch/arm/mach-at91/at91sam9g45.c
2012-01-26Merge branch 'amba' into for-armsocRussell King1-1/+1
2012-01-25ARM: 7300/1: realview: fix definition of GPIO0 interrupt on PB1176 to match TRMWill Deacon1-1/+1
Currently, -1 is used as the GPIO0 interrupt on realview PB1176 and an AMBA device is registered with this parameter. With the pending NO_IRQ cleanup, this will lead to a warning at boot time, since -1 is obviously broken. This patch updates the interrupt used for GPIO0 to match that specified by the TRM. Unfortunately, it's not clear how to trigger this interrupt so we trust that the documentation is correct. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-25ARM: 7298/1: realview: fix mapping of MPCore private memory regionMarc Zyngier2-8/+12
Since commit 0536bdf33faf (ARM: move iotable mappings within the vmalloc region), the RealView PB11MP cannot boot anymore. This is caused by the way the mappings are described on this platform (define replaced by hex values for clarity): { /* GIC CPU interface mapping */ .virtual = IO_ADDRESS(0x1F000100), .pfn = __phys_to_pfn(0x1F000100), .length = SZ_4K, .type = MT_DEVICE, }, { /* GIC distributor mapping */ .virtual = IO_ADDRESS(0x1F001000), .pfn = __phys_to_pfn(0x1F001000), .length = SZ_4K, .type = MT_DEVICE, } The first mapping ends up reserving two pages, and clashes with the second one, which triggers a BUG_ON in vm_area_add_early(). In order to solve this problem, treat the MPCore private memory region (containing the SCU, the GIC and the TWD) as a single region, as described in the TRM: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0360f/CACGDJJC.html The EB11MP is converted the same way, even if it manages to avoid the problem. Tested on both PB11MP and EB11MP. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-20ARM: big removal of now unused arch_idle()Nicolas Pitre1-33/+0
When this is the only content remaining in mach/system.h then the whole file is removed. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-and-tested-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: David Brown <davidb@codeaurora.org> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2012-01-05Merge branch 'restart' into for-linusRussell King1-17/+0
Conflicts: arch/arm/mach-exynos/cpu.c The changes to arch/arm/mach-exynos/cpu.c were moved to mach-exynos/common.c.
2012-01-05ARM: restart: remove the now empty arch_reset()Russell King1-4/+0
Remove the now empty arch_reset() from all the mach/system.h includes, and remove its callsite. Remove arm_machine_restart() as this function no longer does anything useful. For samsung platforms, remove the include of mach/system-reset.h and plat/system-reset.h from their respective mach/system.h headers as these just define their arch_reset functions. As a result, the s3c2410 and plat-samsung system-reset.h files are no longer referenced, so remove these files entirely. Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: realview: use new restart hookRussell King1-13/+0
Hook these platforms restart code into the new restart hook rather than using arch_reset(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-05Merge branch 'vmalloc' of git://git.linaro.org/people/nico/linux into ↵Russell King1-21/+0
devel-stable
2011-11-26ARM: big removal of now unused vmalloc.h filesNicolas Pitre1-21/+0
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-11-15ARM: RealView: convert to CONFIG_MULTI_IRQ_HANDLERMarc Zyngier1-2/+0
Convert the RealView platforms to be using the gic_handle_irq function as their primary interrupt handler. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2011-11-01Merge branch 'next/cross-platform' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds1-15/+2
* 'next/cross-platform' of git://git.linaro.org/people/arnd/arm-soc: arm/imx: use Kconfig choice for low-level debug UART selection ARM: realview: use Kconfig choice for debug UART selection ARM: plat-samsung: use Kconfig choice for debug UART selection ARM: versatile: convert logical CPU numbers to physical numbers ARM: ux500: convert logical CPU numbers to physical numbers ARM: shmobile: convert logical CPU numbers to physical numbers ARM: msm: convert logical CPU numbers to physical numbers ARM: exynos4: convert logical CPU numbers to physical numbers Fix up trivial conflict (config DEBUG_S3C_UART move/split vs addition of ARM_KPROBES_TEST option) in arch/arm/Kconfig.debug
2011-10-28Merge branch 'devel-stable' of ↵Linus Torvalds1-1/+1
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'devel-stable' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (178 commits) ARM: 7139/1: fix compilation with CONFIG_ARM_ATAG_DTB_COMPAT and large TEXT_OFFSET ARM: gic, local timers: use the request_percpu_irq() interface ARM: gic: consolidate PPI handling ARM: switch from NO_MACH_MEMORY_H to NEED_MACH_MEMORY_H ARM: mach-s5p64x0: remove mach/memory.h ARM: mach-s3c64xx: remove mach/memory.h ARM: plat-mxc: remove mach/memory.h ARM: mach-prima2: remove mach/memory.h ARM: mach-zynq: remove mach/memory.h ARM: mach-bcmring: remove mach/memory.h ARM: mach-davinci: remove mach/memory.h ARM: mach-pxa: remove mach/memory.h ARM: mach-ixp4xx: remove mach/memory.h ARM: mach-h720x: remove mach/memory.h ARM: mach-vt8500: remove mach/memory.h ARM: mach-s5pc100: remove mach/memory.h ARM: mach-tegra: remove mach/memory.h ARM: plat-tcc: remove mach/memory.h ARM: mach-mmp: remove mach/memory.h ARM: mach-cns3xxx: remove mach/memory.h ... Fix up mostly pretty trivial conflicts in: - arch/arm/Kconfig - arch/arm/include/asm/localtimer.h - arch/arm/kernel/Makefile - arch/arm/mach-shmobile/board-ap4evb.c - arch/arm/mach-u300/core.c - arch/arm/mm/dma-mapping.c - arch/arm/mm/proc-v7.S - arch/arm/plat-omap/Kconfig largely due to some CONFIG option renaming (ie CONFIG_PM_SLEEP -> CONFIG_ARM_CPU_SUSPEND for the arm-specific suspend code etc) and addition of NEED_MACH_MEMORY_H next to HAVE_IDE.
2011-10-27Merge branch 'gpio' of ↵Linus Torvalds1-6/+1
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'gpio' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (43 commits) ARM: 7135/1: ep93xx: bring back missing <mach/gpio.h> ARM: 7104/1: plat-pxa: break out GPIO driver specifics ARM: 7103/1: plat-pxa: move PXA GPIO driver to GPIO subsystem ARM: 7042/3: mach-ep93xx: break out GPIO driver specifics ARM: 7101/1: arm/tegra: Replace <mach/gpio.h> with <mach/gpio-tegra.h> ARM: 7094/1: arm/tegra: Move EN_VDD_1V05_GPIO to board-harmony.h ARM: 7083/1: rewrite U300 GPIO to use gpiolib ARM: 7074/1: gpio: davinci: eliminate unused variable warnings ARM: 7063/1: Orion: gpio: add missing include of linux/types.h ARM: 7055/1: arm/tegra: mach/gpio.h: include linux/types.h to fix build ARM: 7054/1: arm/tegra: Delete custom gpio_to_irq, and irq_to_gpio ARM: 7053/1: gpio/tegra: Implement gpio_chip.to_irq ARM: 7052/1: gpio/tegra: Remove use of irq_to_gpio ARM: 7057/1: mach-pnx4008: rename GPIO header ARM: 7056/1: plat-nomadik: kill off <plat/gpio.h> ARM: 7050/1: mach-sa1100: delete irq_to_gpio() function ARM: 7049/1: mach-sa1100: move SA1100 GPIO driver to GPIO subsystem ARM: 7045/1: mach-lpc32xx: break out GPIO driver specifics ARM: 7044/1: mach-lpc32xx: move LPC32XX GPIO driver to GPIO subsystem ARM: 7043/1: mach-ixp2000: rename GPIO header ... Fix up trivial conflicts in arch/arm/mach-u300/Kconfig manually
2011-10-18Merge branch 'mach_memory_h' of git://git.linaro.org/people/nico/linux into ↵Russell King1-1/+1
devel-stable
2011-10-17ARM: realview: use Kconfig choice for debug UART selectionWill Deacon1-15/+2
Now that the DEBUG_LL UART can be selected by a Kconfig choice, simplify the #ifdefery in debug-macro.S and add entries to the top-level Kconfig.debug instead. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-10-17ARM: 6217/4: mach-realview: expose PB1176 ROM using physmap and map_romLinus Walleij1-0/+1
This exposes the PB1176 ROM if you compile in the MTD physmap mapping and also the map_rom chiptype. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-26ARM: add an extra temp register to the low level debugging addruart macroNicolas Pitre1-1/+1
Some platforms (like OMAP not to name it) are doing rather complicated hacks just to determine the base UART address to use. Let's give their addruart macro some slack by providing an extra work register which will allow for much needed cleanups. This is basically a no-op as this commit is only adding the extra argument to the macro but no one is using it yet. Signed-off-by: nicolas Pitre <nicolas.pitre@linaro.org> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-08-12ARM: realview: ensure visibility of writes during resetWill Deacon1-0/+1
The various reset routines in mach-realview rely on an FPGA to power-cycle the board after writing some magic runes to memory-mapped registers. This patch adds a dsb() following the writes, so that they become visible before we mdelay(1000) in the arch_reset code. Without this patch, the timeout would expire sporadically, causing the reset to fail. Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-12ARM: gpio: make trivial GPIOLIB implementation the defaultRussell King1-1/+1
Rather than marking the mach/gpio.h header files which want to use the trivial GPIOLIB implementation, mark those which do not want to use it instead. This means that by default, you get the trivial implementation and only have to do something extra if you need to. This should encourage the use of the trivial default implementation. As an additional bonus, several gpio.h header files become empty. Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Tested-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-12ARM: gpio: consolidate gpio_to_irqRussell King1-1/+0
Many of the gpio_to_irq implementations use the gpiolib version of this function. Provide the standard gpiolib gpio_to_irq() for everyone, but allow platforms to override it if they wish. Add the neccessary overrides for those platforms which do not use the standard definition. Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-12ARM: gpio: consolidate trivial gpiolib implementationsRussell King1-5/+1
Consolidate 24 trivial gpiolib implementions out of mach/gpio.h into asm/gpio.h. This is basically the include of asm-generic/gpio.h and the definition of gpio_get_value, gpio_set_value, and gpio_cansleep as described in Documentation/gpio.txt Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Tested-by: David Brown <davidb@codeaurora.org> Acked-by: David Brown <davidb@codeaurora.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-18ARM: mach-realview: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_sizeNicolas Pitre1-4/+0
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-05-23Merge branches 'consolidate-clksrc', 'consolidate-flash', ↵Russell King2-21/+2
'consolidate-generic', 'consolidate-smp', 'consolidate-stmp' and 'consolidate-zones' into consolidate
2011-05-23ARM: consolidate SMP cross call implementationRussell King1-14/+0
Rather than having each platform class provide a mach/smp.h header for smp_cross_call(), arrange for them to register the function with the core ARM SMP code instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-12ARM: 6870/1: The mandatory barrier rmb() must be a dsb() in for device accessesCatalin Marinas1-1/+1
Since mandatory barriers may be used (explicitly or implicitly via readl etc.) to ensure the ordering between Device and Normal memory accesses, a DMB is not enough. This patch converts it to a DSB. Cc: Colin Cross <ccross@android.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-12ARM: use ARM_DMA_ZONE_SIZE to adjust the zone sizesRussell King1-5/+1
Rather than each platform providing its own function to adjust the zone sizes, use the new ARM_DMA_ZONE_SIZE definition to perform this adjustment. This ensures that the actual DMA zone size and the ISA_DMA_THRESHOLD/MAX_DMA_ADDRESS definitions are consistent with each other, and moves this complexity out of the platform code. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-12ARM: Replace platform definition of ISA_DMA_THRESHOLD/MAX_DMA_ADDRESSRussell King1-2/+1
The values of ISA_DMA_THRESHOLD and MAX_DMA_ADDRESS are related; one is the physical/bus address, the other is the virtual address. Both need to be kept in step, so rather than having platforms define both, allow them to define a single macro which sets both of these macros appropraitely. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-17ARM: P2V: separate PHYS_OFFSET from platform definitionsRussell King1-2/+2
This uncouple PHYS_OFFSET from the platform definitions, thereby facilitating run-time computation of the physical memory offset. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Magnus Damm <damm@opensource.se> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Jiandong Zheng <jdzheng@broadcom.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-06Merge branch 'misc' into develRussell King1-3/+2
Conflicts: arch/arm/Kconfig arch/arm/common/Makefile arch/arm/kernel/Makefile arch/arm/kernel/smp.c
2010-12-20ARM: SMP: remove smp_mpidr.hRussell King1-1/+0
With "ARM: CPU hotplug: remove bug checks in platform_cpu_die()", we now do not use hard_smp_processor_id(), we no longer need to read the hardware processor ID. Remove the include providing this function. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-14ARM: GIC: private a standard get_irqnr_preamble assembler macroRussell King1-5/+0
Provide a standard get_irqnr_preamble assembler macro for platforms to use, which retrieves the base address of the GIC CPU interface from gic_cpu_base_addr. Allow platforms to override this by defining HAVE_GET_IRQNR_PREAMBLE. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-07ARM: 6477/1: Use shared GIC entry macros on RealviewMagnus Damm1-59/+1
Use the GIC demux code in asm/hardware/entry-macro-gic.S on the Realview subarchitecture. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-03ARM: SMP: pass an ipi number to smp_cross_call()Russell King1-2/+2
This allows us to use smp_cross_call() to trigger a number of different software generated interrupts, rather than combining them all on one SGI. Recover the SGI number via do_IPI. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-20arm: return both physical and virtual addresses from addruartJeremy Kerr1-6/+4
Rather than checking the MMU status in every instance of addruart, do it once in kernel/debug.S, and change the existing addruart macros to return both physical and virtual addresses. The main debug code can then select the appropriate address to use. This will also allow us to retreive the address of a uart for the MMU state that we're not current in. Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com> and Tony Lindgren <tony@atomide.com>, and fix for versatile express from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-10-04ARM: Provide common header for hard_smp_processor_id()Russell King1-9/+1
Provide a common header to read the SMP CPU number from the MPIDR. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-31Merge branches 'at91', 'ep93xx', 'kexec', 'iop', 'lmb', 'nomadik', 'nuc', ↵Russell King3-5/+5
'pl', 'spear' and 'versatile' into devel
2010-07-16ARM: Remove 'node' argument form arch_adjust_zones()Russell King1-4/+3
Since we no longer support discontigmem, node is always zero, so remove this argument. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-15ARM: 6227/1: PL022 SSP platform data for the RealViewsLinus Walleij1-1/+1
This adds platform data for the PL022 to the ARM RealView reference designs, adds the necessary clock definition and fixes a badly defined IRQ line on the PB1176. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-09ARM: 6204/1: Fixups for the RealView PB1176Linus Walleij1-0/+1
This is a number of basic fixes to the PB1176 that makes it tick properly: - Detect MMC insertion/removal even when PL061 GPIO is not compiled in. The register to read this status directly is removed on the PB1176. - Define the UART3 on the DevChip (where is actually is) and define the new UART4 serial port on the FPGA. - Also define the clocks for these two UARTs apropriately. - Remove the false notion that the PB1176 should have its CLCD on the ISSP, this is not the case, it is in the DevChip. - Remove the defintions and the previously commented-out PL081 DMAC. As confirmed by mail this was found to be broken on the PB1176 board and removed from the subsequent FPGA images. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-02ARM: 6201/1: RealView: Do not use outer_sync() on ARM11MPCore boards with L220Catalin Marinas1-0/+8
RealView boards with certain revisions of the L220 cache controller (ARM11* processors only) may have issues (hardware deadlock) with the recent changes to the mb() barrier implementation (DSB followed by an L2 cache sync). The patch redefines the RealView ARM11MPCore mandatory barriers without the outer_sync() call. Cc: <stable@kernel.org> Tested-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02ARM: Indirect round/set_rate operations through clk structureRussell King1-2/+2
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02ARM: 5890/1: Fix incorrect Realview board IRQs for L220 and PMUWill Deacon3-16/+7
In anticipation of PMU support for Realview boards, the IRQs defined for some of these boards need updating. This patch removes incorrect L220 IRQ definitions, corrects incorrect PMU IRQs and adds any missing IRQs that are required. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02ARM: Make Integrator/Versatile/Reaview VCO code similarRussell King1-1/+1
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02ARM: Realview/Versatile/Integrator: remove unused definitions from platform.hRussell King1-20/+0
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02ARM: Realview/Versatile/Integrator: separate out common clock codeRussell King1-0/+9
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-25Merge branch 'misc2' into develRussell King1-1/+1
2010-02-15ARM: 5928/1: Change type of VMALLOC_END to unsigned long.Fenkart/Bostandzhyan1-1/+1
Makes it consistent with VMALLOC_START Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-12ARM: 5910/1: ARM: Add tmp register for addruart and loadspTony Lindgren1-1/+1
Otherwise more complicated uart configuration won't be possible. We can use r1 for tmp register for both head.S and debug.S. NOTE: This patch depends on another patch to add the the tmp register into all debug-macro.S files. That can be done with: $ sed -i -e "s/addruart,rx|addruart, rx/addruart, rx, tmp/" arch/arm/*/include/*/debug-macro.S Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-11ARM: 5873/1: ARM: Fix the reset logic for ARM RealView boardsColin Tuckley2-3/+3
Extend the patch from Philby John to the other "RealView" boards. Rename the constants and offsets to reflect their actual functions. Cc: Philby John <pjohn@in.mvista.com> Signed-off-by: Colin Tuckley <colin.tuckley@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-15 23:10:48 +0000