summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-pxa
AgeCommit message (Collapse)AuthorFilesLines
2016-03-29ARM: pxa: fix the number of DMA requestor linesRobert Jarzmik1-0/+1
The number of requestor lines was clamped to 0 for all pxa architectures in the requestor declaration. Fix this by using the value. Fixes: 72b195cb7162 ("ARM: pxa: add the number of DMA requestor lines") Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-03-20Merge tag 'armsoc-soc' of ↵Linus Torvalds13-49/+29
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "Newly added support for additional SoCs: - Axis Artpec-6 SoC family - Allwinner A83T SoC - Mediatek MT7623 - NXP i.MX6QP SoC - ST Microelectronics stm32f469 microcontroller New features: - SMP support for Mediatek mt2701 - Big-endian support for NXP i.MX - DaVinci now uses the new DMA engine dma_slave_map - OMAP now uses the new DMA engine dma_slave_map - earlyprintk support for palmchip uart on mach-tango - delay timer support for orion Other: - Exynos PMU driver moved out to drivers/soc/ - Various smaller updates for Renesas, Xilinx, PXA, AT91, OMAP, uniphier" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits) ARM: uniphier: rework SMP code to support new System Bus binding ARM: uniphier: add missing of_node_put() ARM: at91: avoid defining CONFIG_* symbols in source code ARM: DRA7: hwmod: Add data for eDMA tpcc, tptc0, tptc1 ARM: imx: Make reset_control_ops const ARM: imx: Do L2 errata only if the L2 cache isn't enabled ARM: imx: select ARM_CPU_SUSPEND only for imx6 dmaengine: pxa_dma: fix the maximum requestor line ARM: alpine: select the Alpine MSI controller driver ARM: pxa: add the number of DMA requestor lines dmaengine: mmp-pdma: add number of requestors dma: mmp_pdma: Add the #dma-requests DT property documentation ARM: OMAP2+: Add rtc hwmod configuration for ti81xx ARM: s3c24xx: Avoid warning for inb/outb ARM: zynq: Move early printk virtual address to vmalloc area ARM: DRA7: hwmod: Add custom reset handler for PCIeSS ARM: SAMSUNG: Remove unused register offset definition ARM: EXYNOS: Cleanup header files inclusion drivers: soc: samsung: Enable COMPILE_TEST MAINTAINERS: Add maintainers entry for drivers/soc/samsung ...
2016-03-17Merge branch 'for-linus' of ↵Linus Torvalds1-12/+31
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "The most notable item is addition of support for Synaptics RMI4 protocol which is native protocol for all current Synaptics devices (touchscreens, touchpads). In later releases we'll switch devices using HID and PS/2 protocol emulation to RMI4. You will also get: - BYD PS/2 touchpad protocol support for psmouse - MELFAS MIP4 Touchscreen driver - rotary encoder was moved away from legacy platform data and to generic device properties API, devm_* API, and can now handle encoders using more than 2 GPIOs - Cypress touchpad driver was switched to devm_* API and device properties - other assorted driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits) ARM: pxa/raumfeld: use PROPERTY_ENTRY_INTEGER to define props Input: synaptics-rmi4 - using logical instead of bitwise AND Input: powermate - fix oops with malicious USB descriptors Input: snvs_pwrkey - fix returned value check of syscon_regmap_lookup_by_phandle() MAINTAINERS: add devicetree bindings to Input Drivers section Input: synaptics-rmi4 - add device tree support to the SPI transport driver Input: synaptics-rmi4 - add SPI transport driver Input: synaptics-rmi4 - add support for F30 Input: synaptics-rmi4 - add support for F12 Input: synaptics-rmi4 - add device tree support for 2d sensors and F11 Input: synaptics-rmi4 - add support for 2D sensors and F11 Input: synaptics-rmi4 - add device tree support for RMI4 I2C devices Input: synaptics-rmi4 - add I2C transport driver Input: synaptics-rmi4 - add support for Synaptics RMI4 devices Input: ad7879 - add device tree support Input: ad7879 - fix default x/y axis assignment Input: ad7879 - move header to platform_data directory Input: ts4800 - add hardware dependency Input: cyapa - fix for losing events during device power transitions Input: sh_keysc - remove dependency on SUPERH ...
2016-03-15ARM: pxa/raumfeld: use PROPERTY_ENTRY_INTEGER to define propsArnd Bergmann1-11/+4
gcc-6.0 notices that the use of the property_entry in this file that was recently introduced cannot work right, as we initialize the wrong field: raumfeld.c:387:3: error: the address of 'raumfeld_rotary_encoder_steps' will always evaluate as 'true' [-Werror=address] DEV_PROP_U32, 1, &raumfeld_rotary_encoder_steps, }, ^~~~~~~~~~~~ raumfeld.c:389:3: error: the address of 'raumfeld_rotary_encoder_axis' will always evaluate as 'true' [-Werror=address] DEV_PROP_U32, 1, &raumfeld_rotary_encoder_axis, }, ^~~~~~~~~~~~ raumfeld.c:391:3: error: the address of 'raumfeld_rotary_encoder_relative_axis' will always evaluate as 'true' [-Werror=address] DEV_PROP_U32, 1, &raumfeld_rotary_encoder_relative_axis, }, ^~~~~~~~~~~~ The problem appears to stem from relying on an old definition of 'struct property', but it has changed several times since the code could have last been correct. This changes the code to use the PROPERTY_ENTRY_INTEGER() macro instead, which works fine for the current definition and is a safer way of doing the initialization. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: a9e340dce3c3 ("Input: rotary_encoder - move away from platform data structure") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-15Merge tag 'v4.5' into nextDmitry Torokhov115-199/+208
Merge with Linux 4.5 to get PROPERTY_ENTRY_INTEGER() that is needed to fix pxa/raumfeld rotary encoder properties.
2016-03-04usb: gadget: pxa25x_udc: move register definitions from archArnd Bergmann1-163/+0
ixp4xx and pxa25x both use this driver and provide a slightly different set of register definitions for it. Aside from that, the definition in the ixp4xx-regs.h header conflicts with the on in the pxa27x device driver when compile-testing that: In file included from ../drivers/usb/gadget/udc/pxa27x_udc.c:37:0: ../drivers/usb/gadget/udc/pxa27x_udc.h:26:0: warning: "UDCCR" redefined #define UDCCR 0x0000 /* UDC Control Register */ ^ In file included from ../arch/arm/mach-ixp4xx/include/mach/hardware.h:27:0, from ../arch/arm/mach-ixp4xx/include/mach/io.h:18, from ../arch/arm/include/asm/io.h:194, from ../include/linux/io.h:25, from ../include/linux/irq.h:24, from ../drivers/usb/gadget/udc/pxa27x_udc.c:23: ../arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h:415:0: note: this is the location of the previous definition #define UDCCR IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0000) This addresses both issues by moving all the definitions into the pxa25x_udc driver itself. It turns out the only difference between them was 'UDCCS_IO_ROF', and that could well be a mistake when it was incorrectly copied from pxa25x to ixp4xx. Acked-by: Krzysztof Halasa <khalasa@piap.pl> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-02Input: rotary_encoder - move away from platform data structureDmitry Torokhov1-8/+21
Drop support for platform data passed via a C-structure and switch to device properties instead, which should make the driver compatible with all platforms: OF, ACPI and static boards. Static boards should use property sets to communicate device parameters to the driver. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-02Input: rotary_encoder - convert to use gpiod APIDmitry Torokhov1-4/+17
Instead of using old GPIO API, let's switch to GPIOD API, which automatically handles polarity. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-02-26ARM: pxa: add the number of DMA requestor linesRobert Jarzmik4-4/+5
Declare the number of DMA requestor lines per platform : - for pxa25x: 40 requestor lines - for pxa27x: 75 requestor lines - for pxa3xx: 100 requestor lines This information will be used to activate the DMA flow control or not. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-02-20ARM: pxa: pxa3xx device-tree support cleanupRobert Jarzmik1-24/+0
Clocks, timer and several other drivers have well defined and working device-tree bindings. Clean-up the code to leave only the strict minimum. The final goal will be to remove the lookup array. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-02-01ARM: pxa: don't select RFKILL if CONFIG_NET is disabledArnd Bergmann1-1/+1
Bluetooth is only supported when network support is part of the kernel, so it is a bit pointless to build the tosa-bt support without networking. If we try anyway, we get a Kconfig warning: warning: (TOSA_BT && H1940BT) selects RFKILL which has unmet direct dependencies (NET) This adds a dependency on CONFIG_NET to avoid that case. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-02-01ARM: pxa: fix building without IWMMXTArnd Bergmann2-4/+8
When CONFIG_IWMMXT, the pxa3xx and pxa27x suspend/resume code emits some xscale specific instructions, which are rejected by the assembler, because gcc is built with -march=armv5 -mtune=xscale and passes that option to the assembler: /tmp/cciHumzr.s:553: Error: selected processor does not support ARM mode `mra r2,r3,acc0' /tmp/cciHumzr.s:605: Error: selected processor does not support ARM mode `mar acc0,r2,r3' make[3]: *** [arch/arm/mach-pxa/pxa3xx.o] Error 1 /tmp/cci5MUNu.s:326: Error: selected processor does not support ARM mode `mra r2,r3,acc0' /tmp/cci5MUNu.s:367: Error: selected processor does not support ARM mode `mar acc0,r2,r3' make[3]: *** [arch/arm/mach-pxa/pxa27x.o] Error 1 Overriding with -Wa,-march=xscale no longer works, so instead I'm adding an explict ".arch_extension" directive in all four inline assembly statements, which should work even if they end up in a different order in the assembly output. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-02-01ARM: pxa: move extern declarations to pm.hArnd Bergmann2-3/+3
When CONFIG_IWMMXT is disabled, we get a warning in pxa3xx.c: arch/arm/mach-pxa/pxa3xx.c: In function 'pxa3xx_cpu_pm_suspend': arch/arm/mach-pxa/pxa3xx.c:109:2: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement] It turns out that there is an 'extern' declaration in the middle of a function. For consistency, this moves the declaration and two others from the same file into pm.h. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-02-01ARM: pxa: don't select GPIO_SYSFS for MIOA701Arnd Bergmann1-1/+0
GPIO_SYSFS is a common kernel functionality, not something that a board specific Kconfig should have to worry about. In MIOA701, we get a warning about the select when CONFIG_SYSFS is disabled: warning: (MACH_MIOA701) selects GPIO_SYSFS which has unmet direct dependencies (GPIOLIB && SYSFS) This just removes the select and instead enables the symbol in the defconfig file. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-02-01ARM: pxa: mark unused eseries code as __maybe_unusedArnd Bergmann1-2/+2
Two variables in eseries.c are used on multiple platforms, but are not referenced when those are all disabled: eseries.c:60:31: warning: 'e7xx_gpio_vbus' defined but not used [-Wunused-variable] eseries.c:129:20: warning: 'eseries_register_clks' defined but not used [-Wunused-function] Marking them __maybe_unused is the nicest way to ensure that we never get the warning or end up with missing symbols if we get it wrong. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-02-01ARM: pxa: mark spitz_card_pwr_ctrl as __maybe_unusedArnd Bergmann1-1/+1
This function is only used when CONFIG_PCMCIA is enabled, otherwise we get a harmless warning: arch/arm/mach-pxa/spitz.c:204:13: warning: 'spitz_card_pwr_ctrl' defined but not used [-Wunused-function] Marking it as __maybe_unused keeps the logic simple and avoids the warning on randconfig builds. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-02-01ARM: pxa: define clock registers as __iomemArnd Bergmann4-9/+9
We should not dereference registers as pointers, so use readl/writel instead for these registers. The clock registers are accessed in multiple files, so we have to change them all at once. I stumbled over these registers while looking at something unrelated. There are in fact other registers with the same problem, but I did not try to address those at this point. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-01-20Merge tag 'armsoc-multiplatform' of ↵Linus Torvalds115-188/+197
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC multiplatform code updates from Arnd Bergmann: "This branch is the culmination of 5 years of effort to bring the ARMv6 and ARMv7 platforms together such that they can all be enabled and boot the same kernel. It has been a tremendous amount of cleanup and refactoring by a huge number of people, and creation of several new (and major) subsystems to better abstract out all the platform details in an appropriate manner. The bulk of this branch is a large patchset from Arnd that brings several of the more minor and older platforms we have closer to multiplatform support. Among these are MMP, S3C64xx, Orion5x, mv78xx0 and realview Much of this is moving around header files from old mach directories, but there are also some cleanup patches of debug_ll (lowlevel debug per-platform options) and other parts. Linus Walleij also has some patchs to clean up the older ARM Realview platforms by finally introducing DT support, and Rob Herring has some for ARM Versatile which is now DT-only. Both of these platforms are now multiplatform. Finally, a couple of patches from Russell for Dove PMU, and a fix from Valentin Rothberg for Exynos ADC, which were rebased on top of the series to avoid conflicts" * tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits) ARM: realview: don't select SMP_ON_UP for UP builds ARM: s3c: simplify s3c_irqwake_{e,}intallow definition ARM: s3c64xx: fix pm-debug compilation iio: exynos-adc: fix irqf_oneshot.cocci warnings ARM: realview: build realview-dt SMP support only when used ARM: realview: select apropriate targets ARM: realview: clean up header files ARM: realview: make all header files local ARM: no longer make CPU targets visible separately ARM: integrator: use explicit core module options ARM: realview: enable multiplatform ARM: make default platform work for NOMMU ARM: debug-ll: move DEBUG_LL_UART_EFM32 to correct Kconfig location ARM: defconfig: use correct debug_ll settings ARM: versatile: convert to multi-platform ARM: versatile: merge mach code into a single file ARM: versatile: switch to DT only booting and remove legacy code ARM: versatile: add DT based PCI detection ARM: pxa: mark ezx structures as __maybe_unused ARM: pxa: mark raumfeld init functions as __maybe_unused ...
2016-01-13Merge tag 'for-linus-20160112' of git://git.infradead.org/linux-mtdLinus Torvalds3-3/+3
Pull MTD updates from Brian Norris: "Generic MTD: - populate the MTD device 'of_node' field (and get a proper 'of_node' symlink in sysfs) This yielded some new helper functions, and changes across a variety of drivers - partitioning cleanups, to prepare for better device-tree based partitioning in the future Eliminate a lot of boilerplate for drivers that want to use OF-based partition parsing The DT bindings for this didn't settle yet, so most non-cleanup portions are deferred for a future release NAND: - embed a struct mtd_info inside struct nand_chip This is really long overdue; too many drivers have to do the same silly boilerplate to allocate and link up two "independent" structs, when in fact, everyone is assuming there is an exact 1:1 relationship between a NAND chips struct and its underlying MTD. This aids improved helpers and should make certain abstractions easier in the future. Also causes a lot of churn, helped along by some automated code transformations - add more core support for detecting (and "correcting") bitflips in erased pages; requires opt-in by drivers, but at least we kill a few bad implementations and hopefully stave off future ones - pxa3xx_nand: cleanups, a few fixes, and PM improvements - new JZ4780 NAND driver SPI NOR: - provide default erase function, for controllers that just want to send the SECTOR_ERASE command directly - fix some module auto-loading issues with device tree ("jedec,spi-nor") - error handling fixes - new Mediatek QSPI flash driver Other: - cfi: force valid geometry Kconfig (finally!) This one used to trip up randconfigs occasionally, since bots aren't deterred by big scary "advanced configuration" menus More? Probably. See the commit logs" * tag 'for-linus-20160112' of git://git.infradead.org/linux-mtd: (168 commits) mtd: jz4780_nand: replace if/else blocks with switch/case mtd: nand: jz4780: Update ecc correction error codes mtd: nandsim: use nand_get_controller_data() mtd: jz4780_nand: remove useless mtd->priv = chip assignment staging: mt29f_spinand: make use of nand_set/get_controller_data() helpers mtd: nand: make use of nand_set/get_controller_data() helpers ARM: make use of nand_set/get_controller_data() helpers mtd: nand: add helpers to access ->priv mtd: nand: jz4780: driver for NAND devices on JZ4780 SoCs mtd: nand: jz4740: remove custom 'erased check' implementation mtd: nand: diskonchip: remove custom 'erased check' implementation mtd: nand: davinci: remove custom 'erased check' implementation mtd: nand: use nand_check_erased_ecc_chunk in default ECC read functions mtd: nand: return consistent error codes in ecc.correct() implementations doc: dt: mtd: new binding for jz4780-{nand,bch} mtd: cfi_cmdset_0001: fixing memory leak and handling failed kmalloc mtd: spi-nor: wait until lock/unlock operations are ready mtd: tests: consolidate kmalloc/memset 0 call to kzalloc jffs2: use to_delayed_work mtd: nand: assign reasonable default name for NAND drivers ...
2016-01-11Merge branch 'patchwork' into v4l_for_linusMauro Carvalho Chehab7-8/+8
* patchwork: (204 commits) [media] rc: sunxi-cir: Initialize the spinlock properly [media] rtl2832: do not filter out slave TS null packets [media] rtl2832: print reg number on error case [media] rtl28xxu: return demod reg page from driver cache [media] coda: enable MPEG-2 ES decoding [media] coda: don't start streaming without queued buffers [media] coda: hook up vidioc_prepare_buf [media] coda: relax coda_jpeg_check_buffer for trailing bytes [media] coda: make to_coda_video_device static [media] s5p-mfc: remove volatile attribute from MFC register addresses [media] s5p-mfc: merge together s5p_mfc_hw_call and s5p_mfc_hw_call_void [media] s5p-mfc: use spinlock to protect MFC context [media] s5p-mfc: remove unnecessary callbacks [media] s5p-mfc: make queue cleanup code common [media] s5p-mfc: use one implementation of s5p_mfc_get_new_ctx [media] s5p-mfc: constify s5p_mfc_codec_ops structures [media] au8522: Avoid memory leak for device config data [media] ir-lirc-codec.c: don't leak lirc->drv-rbuf [media] uvcvideo: small cleanup in uvc_video_clock_update() [media] uvcvideo: Fix reading the current exposure value of UVC ...
2015-12-17Merge branch 'fixes' into next/multiplatformArnd Bergmann1-0/+5
The 'fixes' branch contains d5d4fdd86f57 ("irqchip/versatile-fpga: Fix PCI IRQ mapping on Versatile PB") that is required for booting the versatile platform prior to the rework in this branch, but including both causes a build-time error. I'm doing an evil merge here to pull in the fixes branch so we have that commit included but at the same time revert the trivial change. This gives us a bisectable history. * fixes: (22 commits) fsl-ifc: add missing include on ARM64 ls2080a/dts: Add little endian property for GPIO IP block dt-bindings: define little-endian property for QorIQ GPIO ARM64: dts: ls2080a: fix eSDHC endianness ARM: dts: vf610: use reset values for L2 cache latencies ARM: pxa: use PWM lookup table for all machines ARM: dts: berlin: add 2nd clock for BG2Q sdhci0 and sdhci1 ARM: dts: berlin: correct BG2Q's sdhci2 2nd clock ARM: dts: am4372: fix clock source for arm twd and global timers ARM: at91: fix pinctrl driver selection ARM: at91/dt: add always-on to 1.8V regulator ARM: dts: vf610: fix clock definition for SAI2 ARM: imx: clk-vf610: fix SAI clock tree ARM: ixp4xx: fix read{b,w,l} return types irqchip/versatile-fpga: Fix PCI IRQ mapping on Versatile PB ARM: OMAP2+: enable REGULATOR_FIXED_VOLTAGE ARM: dts: add dm816x missing spi DT dma handles ARM: dts: add dm816x missing #mbox-cells cpufreq: s3c24xx: Do not mark s3c2410_plls_add as __init bus: sunxi-rsb: unlock on error in sunxi_rsb_read() ...
2015-12-15ARM: pxa: mark ezx structures as __maybe_unusedArnd Bergmann1-5/+5
The ezx platform contains multiple machine descriptors, but not all of them use all of the data structures, and it's possible to disable all of the machines, which produces some harmless warnings: mach-pxa/ezx.c:53:26: warning: 'ezx_pwm_lookup' defined but not used [-Wunused-variable] mach-pxa/ezx.c:86:31: warning: 'ezx_fb_info_1' defined but not used [-Wunused-variable] mach-pxa/ezx.c:107:31: warning: 'ezx_fb_info_2' defined but not used [-Wunused-variable] mach-pxa/ezx.c:113:32: warning: 'ezx_devices' defined but not used [-Wunused-variable] mach-pxa/ezx.c:117:22: warning: 'ezx_pin_config' defined but not used [-Wunused-variable] This marks all those structures as __maybe_unused to avoid the warnings. Obviously a configuration that contains the ezx platform but no specific model is a bit silly, but it should not cause compile-time warnings. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-12-15ARM: pxa: mark raumfeld init functions as __maybe_unusedArnd Bergmann1-3/+3
The raumfeld.c file contains three similar machine definitions, each with their own init function. If one or more of them are disabled, we get compile-time warnings: arm/mach-pxa/raumfeld.c:1070:123: warning: 'raumfeld_connector_init' defined but not used [-Wunused-function] arm/mach-pxa/raumfeld.c:1082:123: warning: 'raumfeld_speaker_init' defined but not used [-Wunused-function] This marks the functions as __maybe_unused to avoid the warnings. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Daniel Mack <daniel@zonque.org>
2015-12-15ARM: pxa: cm-x2xx: avoid duplicate macro warningsArnd Bergmann1-0/+9
In an old commit, we worked around the duplicate definition of GPIO24_SSP1_SFRM in cm-x2xx.c, which includes files for both pxa25x and pxa27x. Apparently the problem has come back and we now have four additional duplicate symbols that cause warnings: In file included from /git/arm-soc/arch/arm/mach-pxa/pxa27x.h:7:0, from /git/arm-soc/arch/arm/mach-pxa/cm-x2xx.c:27: /git/arm-soc/arch/arm/mach-pxa/mfp-pxa27x.h:21:0: warning: "GPIO86_GPIO" redefined #define GPIO86_GPIO MFP_CFG_IN(GPIO86, AF0) This uses the same hack as before and undefines all symbols that are defined more than once. Fortunately, cm-x2xx does not need any of these. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-12-11ARM: pxa: use PWM lookup table for all machinesArnd Bergmann1-0/+5
The recent change to use a pwm lookup table for the ezx machines was incomplete and only changed the a780 model, but not the other ones in the same file. This adds the missing calls to pwm_add_table(). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: c3322022897c ("ARM: pxa: ezx: Use PWM lookup table") Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-12-07ARM: nand: make use of mtd_to_nand() where appropriateBoris BREZILLON3-3/+3
mtd_to_nand() was recently introduced to avoid direct accesses to the mtd->priv field. Update all ARM specific implementations to use this helper. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-12-01ARM: pxa: make more mach/*.h files localArnd Bergmann115-180/+180
Lots of header files are never included outside of a mach-pxa directory and do not need to be made visible in include/mach, so let's just move them all down one level. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-11-19ARM: pxa: palm: Fix typos in PWM lookup table codeThierry Reding2-2/+2
The patches that were applied to add PWM lookup tables for legacy boards were from v1 of the series instead of the revised v2 where the resulting build errors had already been fixed. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-11-19[media] move media platform data to linux/platform_data/mediaMauro Carvalho Chehab7-7/+7
Now that media has its own subdirectory inside platform_data, let's move the headers that are already there to such subdir. After moving those files, the references were adjusted using this script: MAIN_DIR="linux/platform_data/" PREV_DIR="linux/platform_data/" DIRS="media/" echo "Checking affected files" >&2 for i in $DIRS; do for j in $(find include/$MAIN_DIR/$i -type f -name '*.h'); do n=`basename $j` git grep -l $n done done|sort|uniq >files && ( echo "Handling files..." >&2; echo "for i in \$(cat files|grep -v Documentation); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo "perl -ne 's,(include [\\\"\\<])$PREV_DIR($i)([\\\"\\>]),\1$MAIN_DIR$j\2\3,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done"; ); echo "Handling documentation..." >&2; echo "for i in MAINTAINERS \$(cat files); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo " perl -ne 's,include/$PREV_DIR($i)\b,include/$MAIN_DIR$j\1,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done" ); ) >script && . ./script Suggested-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-17[media] include/media: split I2C headers from V4L2 coreMauro Carvalho Chehab1-1/+1
Currently, include/media is messy, as it contains both the V4L2 core headers and some driver-specific headers on the same place. That makes harder to identify what core headers should be documented and what headers belong to I2C drivers that are included only by bridge/main drivers that would require the functions provided by them. Let's move those i2c specific files to its own subdirectory. The files to move were produced via the following script: mkdir include/media/i2c (cd include/media; for i in *.h; do n=`echo $i|sed s/.h$/.c/`; if [ -e ../../drivers/media/i2c/$n ]; then echo $i; git mv $i i2c/; fi; done) (cd include/media; for i in *.h; do n=`echo $i|sed s/.h$/.c/`; if [ -e ../../drivers/media/*/i2c/$n ]; then echo $i; git mv $i i2c/; fi; done) for i in include/media/*.h; do n=`basename $i`; (for j in $(git grep -l $n); do dirname $j; done)|sort|uniq|grep -ve '^.$' > list; num=$(wc -l list|cut -d' ' -f1); if [ $num == 1 ]; then if [ "`grep i2c list`" != "" ]; then git mv $i include/media/i2c; fi; fi; done And the references corrected via this script: MAIN_DIR="media/" PREV_DIR="media/" DIRS="i2c/" echo "Checking affected files" >&2 for i in $DIRS; do for j in $(find include/$MAIN_DIR/$i -type f -name '*.h'); do n=`basename $j` git grep -l $n done done|sort|uniq >files && ( echo "Handling files..." >&2; echo "for i in \$(cat files|grep -v Documentation); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo "perl -ne 's,(include [\\\"\\<])$PREV_DIR($i)([\\\"\\>]),\1$MAIN_DIR$j\2\3,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done"; ); echo "Handling documentation..." >&2; echo "for i in MAINTAINERS \$(cat files); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo " perl -ne 's,include/$PREV_DIR($i)\b,include/$MAIN_DIR$j\1,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done" ); ) >script && . ./script Merged Sakari Ailus patch that moves smiapp.h to include/media/i2c. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2015-11-10Merge tag 'armsoc-cleanup' of ↵Linus Torvalds22-340/+608
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "Again we have a sizable (but not huge) cleanup branch with a net delta of about -3k lines. Main contents here is: - A bunch of development/cleanup of a few PXA boards - Removal of bockw platforms on shmobile, since the platform has now gone completely multiplatform. Whee! - move of the 32kHz timer on OMAP to a proper timesource - Misc cleanup of older OMAP material (incl removal of one board file) - Switch over to new common PWM lookup support for several platforms There's also a handful of other cleanups across the tree, but the above are the major pieces" * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (103 commits) ARM: OMAP3: hwmod data: Remove legacy mailbox data and addrs ARM: DRA7: hwmod data: Remove spinlock hwmod addrs ARM: OMAP4: hwmod data: Remove spinlock hwmod addrs ARM: DRA7/AM335x/AM437x: hwmod: Remove gpmc address space from hwmod data ARM: Remove __ref on hotplug cpu die path ARM: Remove open-coded version of IRQCHIP_DECLARE arm: omap2: board-generic: use omap4_local_timer_init for AM437x ARM: DRA7/AM335x/AM437x: hwmod: Remove elm address space from hwmod data ARM: OMAP: Remove duplicated operand in OR operation clocksource: ti-32k: make it depend on GENERIC_CLOCKSOURCE ARM: pxa: remove incorrect __init annotation on pxa27x_set_pwrmode ARM: pxa: raumfeld: make some variables static ARM: OMAP: Change all cpu_is_* occurences to soc_is_* for id.c ARM: OMAP2+: Rename cpu_is macros to soc_is arm: omap2: timer: limit hwmod usage to non-DT boots arm: omap2+: select 32k clocksource driver clocksource: add TI 32.768 Hz counter driver arm: omap2: timer: rename omap_sync32k_timer_init() arm: omap2: timer: always call clocksource_of_init() when DT arm: omap2: timer: move realtime_counter_init() around ...
2015-10-23Merge tag 'pxa-for-4.4' of https://github.com/rjarzmik/linux into next/cleanupOlof Johansson22-340/+608
This is the pxa changes for v4.4 cycle. This cycle is bigger than usual : - magician was greatly enhanced (new IPs discovered, ...) - almost all legacy board files have been updated to the new PWM API (mostly for backlight control) - some minor fixes in raumfeld, z2 and mioa701 * tag 'pxa-for-4.4' of https://github.com/rjarzmik/linux: (44 commits) ARM: pxa: remove incorrect __init annotation on pxa27x_set_pwrmode ARM: pxa: raumfeld: make some variables static ARM: pxa: magician: Remove pdata for pasic3-leds ARM: pxa: magician: Add support for PXA27x UDC ARM: pxa: magician: Add support for MAX1587A Vcore regulator ARM: pxa: magician: Change comments to be more informative ARM: pxa: magician: Move platform_add_devices() to the end of magician_init() ARM: pxa: magician: Add missing regulator for PWM backlight ARM: pxa: magician: Add debug message for backlight brightness function ARM: pxa: magician: Remove definition of the STUART port ARM: pxa: magician: Fix wrongly enabled USB host ports ARM: pxa: magician: Fix support for Intel Strata NOR Flash ARM: pxa: magician: Fix redundant GPIO request for pxaficp_ir ARM: pxa: magician: Fix platform data for both PXA27x I2C controllers ARM: pxa: magician: Fix and add charging detection functions ARM: pxa: magician: Optimize Samsung LCD refresh to 50Hz ARM: pxa: magician: Rename charger cable detection EGPIOs ARM: pxa: magician: Optimize powerup delays for Samsung LCD ARM: pxa: magician: Rename abstract LCD GPIOs ARM: pxa: magician: Add new discovered EGPIO pins ... Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-16ARM: pxa: remove incorrect __init annotation on pxa27x_set_pwrmodeArnd Bergmann2-2/+2
The z2 machine calls pxa27x_set_pwrmode() in order to power off the machine, but this function gets discarded early at boot because it is marked __init, as pointed out by kbuild: WARNING: vmlinux.o(.text+0x145c4): Section mismatch in reference from the function z2_power_off() to the function .init.text:pxa27x_set_pwrmode() The function z2_power_off() references the function __init pxa27x_set_pwrmode(). This is often because z2_power_off lacks a __init annotation or the annotation of pxa27x_set_pwrmode is wrong. This removes the __init section modifier to fix rebooting and the build error. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: ba4a90a6d86a ("ARM: pxa/z2: fix building error of pxa27x_cpu_suspend() no longer available") Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-16ARM: pxa: raumfeld: make some variables staticUwe Kleine-König1-5/+5
This fixes the following sparse warnings: arch/arm/mach-pxa/raumfeld.c:510:24: warning: symbol 'raumfeld_w1_gpio_device' was not declared. Should it be static? arch/arm/mach-pxa/raumfeld.c:632:31: warning: symbol 'raumfeld_spi_platform_data' was not declared. Should it be static? arch/arm/mach-pxa/raumfeld.c:851:28: warning: symbol 'audio_va_initdata' was not declared. Should it be static? arch/arm/mach-pxa/raumfeld.c:883:28: warning: symbol 'audio_dummy_initdata' was not declared. Should it be static? arch/arm/mach-pxa/raumfeld.c:931:28: warning: symbol 'max8660_v6_subdev_data' was not declared. Should it be static? Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: magician: Remove pdata for pasic3-ledsPetr Cvek1-42/+1
The pasic3-leds driver was never in vanilla kernel. Actual configuration data for a hypothetical driver does not describe hardware completely, so remove them. This patch prepare HTC Magician machine code to pasic3-leds driver addition. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Acked-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: magician: Add support for PXA27x UDCPetr Cvek1-0/+22
A PXA27x SoC supports USB device mode, this patch adds support for that. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Acked-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: magician: Add support for MAX1587A Vcore regulatorPetr Cvek1-0/+52
HTC Magician contains a MAX1587A voltage regulator for a Vcore supply. The Vcore regulation is required for a CPU speed switching. This patch adds declaration for the max1586 driver. Notice: - MAX1587A version does not support the V6 (USIM) output. - A boost resistor was directly measured for a board_id 0x3a. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: magician: Change comments to be more informativePetr Cvek1-13/+29
This patch changes the comments in the HTC Magician machine source code to better describe used devices and interfaces. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: magician: Move platform_add_devices() to the end of magician_init()Petr Cvek1-1/+2
This patch moves platform_add_devices() (standard declaration of devices) outside of the platform specific device declarations. Moving to the end of the magician_init() clarifies the source code (standard and specific declaration are not mixed). Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Acked-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: magician: Add missing regulator for PWM backlightPetr Cvek1-0/+13
Add a fake regulator, which is required for the correct initialization of the PWM backlight driver. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Acked-by: Philipp Zabel <philipp.zabel@gmail.com> [ added a missing include for fixed regulator ] Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: magician: Add debug message for backlight brightness functionPetr Cvek1-0/+1
Add a debug message for the backlight brightness function. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: magician: Remove definition of the STUART portPetr Cvek1-1/+0
Magician STUART port is connected to the infraport and used by the FICP driver. The FICP driver uses its own definition. Required for correct initialization of the pxaficp_ir driver after planned dmaengine conversion. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: magician: Fix wrongly enabled USB host portsPetr Cvek1-1/+3
USB host ports on the HTC Magician are wrongly enabled. Port 1 is for bluetooth and port 2 is for OTG (mux in the charger connector). Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: magician: Fix support for Intel Strata NOR FlashPetr Cvek1-0/+45
Old definition for the physmap-flash driver is incomplete: - Use of an EGPIO without previous request - Missing the MTD partitions This patch fixes it. Read functionality was tested on the machine with board_id 0x3a. Writing was not tested. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: magician: Fix redundant GPIO request for pxaficp_irPetr Cvek1-1/+1
The pxaficp_ir driver requests a power GPIO for the transceiver internally, so a global GPIO allocation in magician_init() is redundant. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: magician: Fix platform data for both PXA27x I2C controllersPetr Cvek1-2/+11
This patch changes fast_mode settings for the normal and power I2C controller on the HTC Magician machine. Connected device on the Power I2C: - MAX1587A: working in the fast mode Connected devices on the Normal I2C: - UDA1380: working in the fast mode - OV9640: bus became stuck in the fast mode The OV9640 is not using a standard I2C protocol, but an SCCB variant. Maybe it is not fully compatible in the fast mode. Therefore fast mode for normal I2C is disabled. If you not using the OV9640 then you can enable the fast mode for the UDA1380. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> [included Philipp Zabel's comment change] Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: magician: Fix and add charging detection functionsPetr Cvek1-7/+50
This patch fixes the charging detection functions for pda_power driver (according to newly discovered EGPIOs) and add NiCd backup accumulator charging support. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: magician: Optimize Samsung LCD refresh to 50HzPetr Cvek1-1/+1
Change the default Samsung LCD refresh from an unrealistic 117Hz to 50Hz as no video applications on the HTC Magician can work that fast. The optimalization lowers the RAM latency at least by 3%. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Acked-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: magician: Rename charger cable detection EGPIOsPetr Cvek2-7/+12
This patch renames EGPIOs, which are used for the charging cable presence and type detection. Old names did not correspond with an observed functionality (on board_id 0x3a). The behavior is not: - AC charger - USB charger - Cable detection , but: - AC/USB type - Cable detection1 - Cable detection2 This patch fixes a possible typo in the bit offset for the cable detection EGPIO declaration, too. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: magician: Optimize powerup delays for Samsung LCDPetr Cvek1-8/+6
Delays for the Samsung LCD are greater than needed. These values were extracted from a datasheet. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Acked-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 10:04:38 +0000