summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-pxa/pxa27x.c
AgeCommit message (Collapse)AuthorFilesLines
2022-05-07ARM: pxa: move mach/*.h to mach-pxa/Arnd Bergmann1-3/+3
None of the headers are included from outside of the mach-pxa directory, so move them all in there. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-19ARM: pxa: make addr-map.h header localArnd Bergmann1-1/+1
Drivers should not rely on the contents of this file, so move it into the platform directory directly. Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/lkml/87mudkmx8g.fsf@belgarion.home/
2022-04-19watchdog: sa1100: use platform device registrationArnd Bergmann1-1/+1
Rather than relying on machine specific headers to pass down the reboot status and the register locations, use resources and platform_data. Aside from this, keep the changes to a minimum. Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: linux-watchdog@vger.kernel.org Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-19ARM: pxa: split up mach/hardware.hArnd Bergmann1-1/+2
The mach/hardware.h is included in lots of places, and it provides three different things on pxa: - the cpu_is_pxa* macros - an indirect inclusion of mach/addr-map.h - the __REG() and io_pv2() helper macros Split it up into separate <linux/soc/pxa/cpu.h> and mach/pxa-regs.h headers, then change all the files that use mach/hardware.h to include the exact set of those three headers that they actually need, allowing for further more targeted cleanup. linux/soc/pxa/cpu.h can remain permanently exported and is now in a global location along with similar headers. pxa-regs.h and addr-map.h are only used in a very small number of drivers now and can be moved to arch/arm/mach-pxa/ directly when those drivers are to pass the necessary data as resources. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <linux@roeck-us.net> Acked-by: Mark Brown <broonie@kernel.org> Cc: linux-clk@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: linux-leds@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: linux-mtd@lists.infradead.org Cc: linux-rtc@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-fbdev@vger.kernel.org Cc: linux-watchdog@vger.kernel.org Cc: alsa-devel@alsa-project.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-19ARM: pxa: remove mach/dma.hArnd Bergmann1-1/+0
The file no longer contains anything useful, so remove it. Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-18ARM: pxa: add dma slave mapRobert Jarzmik1-1/+38
In order to remove the specific knowledge of the dma mapping from PXA drivers, add a default slave map for pxa architectures. This is the first step, and once all drivers are converted, pxad_filter_fn() will be made static, and the DMA resources removed from device.c. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reported-by: Arnd Bergmann <arnd@arndb.de>
2017-11-28ARM: pxa: move header file out of I2C realmWolfram Sang1-1/+1
include/linux/i2c is to be deprecated. Move this platform_data to the proper platform_data dir. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2017-02-28ARM: 8641/1: treewide: Replace uses of virt_to_phys with __pa_symbolFlorian Fainelli1-1/+1
All low-level PM/SMP code using virt_to_phys() should actually use __pa_symbol() against kernel symbols. Update code where relevant to move away from virt_to_phys(). Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-09-09ARM: pxa: remove irq init from dt machinesRobert Jarzmik1-3/+8
The init_irq and handle_irq can be declared through standard irqchip declaration and are not necessary in machine descriptions. This is another step towards the generic kernel for the pxa architecture. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Arnd Bergmann <arnd@arndb.de>
2016-08-09ARM: pxa: remove platform dma codeRobert Jarzmik1-3/+0
As the last pxa related driver was converted to dmaengine, it's time to kill the legacy dma code, which is not used anymore. This finishes the pxa dmaengine transition. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-02-26ARM: pxa: add the number of DMA requestor linesRobert Jarzmik1-1/+1
Declare the number of DMA requestor lines per platform : - for pxa25x: 40 requestor lines - for pxa27x: 75 requestor lines - for pxa3xx: 100 requestor lines This information will be used to activate the DMA flow control or not. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-02-01ARM: pxa: fix building without IWMMXTArnd Bergmann1-2/+4
When CONFIG_IWMMXT, the pxa3xx and pxa27x suspend/resume code emits some xscale specific instructions, which are rejected by the assembler, because gcc is built with -march=armv5 -mtune=xscale and passes that option to the assembler: /tmp/cciHumzr.s:553: Error: selected processor does not support ARM mode `mra r2,r3,acc0' /tmp/cciHumzr.s:605: Error: selected processor does not support ARM mode `mar acc0,r2,r3' make[3]: *** [arch/arm/mach-pxa/pxa3xx.o] Error 1 /tmp/cci5MUNu.s:326: Error: selected processor does not support ARM mode `mra r2,r3,acc0' /tmp/cci5MUNu.s:367: Error: selected processor does not support ARM mode `mar acc0,r2,r3' make[3]: *** [arch/arm/mach-pxa/pxa27x.o] Error 1 Overriding with -Wa,-march=xscale no longer works, so instead I'm adding an explict ".arch_extension" directive in all four inline assembly statements, which should work even if they end up in a different order in the assembly output. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-12-01ARM: pxa: make more mach/*.h files localArnd Bergmann1-2/+2
Lots of header files are never included outside of a mach-pxa directory and do not need to be made visible in include/mach, so let's just move them all down one level. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-16ARM: pxa: remove incorrect __init annotation on pxa27x_set_pwrmodeArnd Bergmann1-1/+1
The z2 machine calls pxa27x_set_pwrmode() in order to power off the machine, but this function gets discarded early at boot because it is marked __init, as pointed out by kbuild: WARNING: vmlinux.o(.text+0x145c4): Section mismatch in reference from the function z2_power_off() to the function .init.text:pxa27x_set_pwrmode() The function z2_power_off() references the function __init pxa27x_set_pwrmode(). This is often because z2_power_off lacks a __init annotation or the annotation of pxa27x_set_pwrmode is wrong. This removes the __init section modifier to fix rebooting and the build error. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: ba4a90a6d86a ("ARM: pxa/z2: fix building error of pxa27x_cpu_suspend() no longer available") Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-09-05rtc: pxa: convert to use shared sa1100 functionsRob Herring1-1/+0
Currently, the rtc-sa1100 and rtc-pxa drivers co-exist as rtc-pxa has a superset of functionality. Having 2 drivers sharing the same memory resource is not allowed by the driver model if resources are properly declared. This problem was avoided by not adding memory resources to the SA1100 RTC driver, but that prevents clean-up of the SA1100 driver. This commit converts the PXA RTC to use the exported SA1100 RTC functions. Now the sa1100-rtc and pxa-rtc devices are mutually exclusive, so we must remove the sa1100-rtc from pxa27x and pxa3xx. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Russell King <linux@arm.linux.org.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: linux-arm-kernel@lists.infradead.org Cc: rtc-linux@googlegroups.com Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-07-18ARM: pxa: transition to dmaengine phase 1Robert Jarzmik1-0/+1
In order to slowly transition pxa to dmaengine, the legacy code will now rely on dmaengine to request a channel. This implies that PXA architecture selects DMADEVICES and PXA_DMA, which is not pretty. Yet it enables PXA drivers to be ported one by one, with part of them using dmaengine, and the other part using the legacy code. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-05-12ARM: pxa: Transition pxa25x and pxa27x to clk frameworkRobert Jarzmik1-172/+2
Transition the PXA25x and PXA27x CPUs to the clock framework. This transition still enables legacy platforms to run without device tree as before, ie relying on platform data encoded in board specific files. The transition breaks the previous clocks activation of pin control (gpio11 and gpio12). Machine files should be amended to take that into account. This is the last step of clock framework transition for pxa25x and pxa27x, leaving only pxa3xx for further work. Reviewed-by: Michael Turquette <mturquette@linaro.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-05-12ARM: pxa: pxa27x skip default device initialization with DTRobert Jarzmik1-2/+6
When booting via DT, the default PXA devices must not have been probed before, otherwise the augmented information from the device tree is ignored. This is the twin commit of commit 82ce44d104dc ("ARM: pxa3xx: skip default device initialization when booting via DT"). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Daniel Mack <daniel@zonque.org>
2014-11-19arm: pxa: add device-tree irq init for pxa27xRobert Jarzmik1-0/+6
Add the initializer for irqs in a device-tree machine on a pxa27x. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-07-12ARM: pxa: pxa27x: Don't map IMEMC region staticallyLaurent Pinchart1-5/+0
The IMEMC mapping not only has no user, but maps a reserved memory space. It just wastes vmalloc space, remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-12ARM: pxa: Move UNCACHED_PHYS_0 mapping from generic.c to pxa2[57]x.cLaurent Pinchart1-0/+5
The UNCACHED_PHYS_0 mapping is only needed on PXA25x and PXA27x platforms. Move it to pxa25x.c and pxa27x.c to avoid wasting vmalloc space on PXA3xx. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-12ARM: pxa: Don't hardcode addresses and size in map_desc tablesLaurent Pinchart1-4/+4
The virtual address, physical address and size of all regions for which we create static mappings are defined in PXA headers. Replaced the hardcoded values with macros. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-11ARM: pxa: move PXA_GPIO_TO_IRQ macroHaojian Zhuang1-1/+2
Since PXA_GPIO_TO_IRQ() & MMP_GPIO_TO_IRQ() macro are depended on arch code, move them from gpio driver to platform driver instead. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-11ARM: pxa: remove cpu_is_xxx in gpio driverHaojian Zhuang1-2/+2
Avoid to use cpu_is_xxx() in pxa gpio driver. Use platform_device_id to identify the difference. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-21Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-0/+1
Pull ARM SoC board specific changes from Arnd Bergmann: "These updates are all for board specific code, including - defconfig updates for shmobile, davinci, bcm2835, imx, omap and tegra - SD/MMC and I2C support on bcm2835 (Raspberry PI) - minor updates for PXA - shmobile updates to GPIO usage in board files - More things in OMAP board files are moved over to device tree probing - Better support for audio devices on some OMAP platforms" * tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (55 commits) ARM: imx_v4_v5_defconfig: Add VPU support ARM: imx: configs: enable netfilter support ARM: OMAP2+: Fix twl section warnings related to omap_twl4030_audio_init ARM: OMAP2+: omap2plus_defconfig: enable omap1 rtc RX-51: Register twl4030-madc device RX-51: Add leds lp5523 names from Maemo 5 2.6.28 kernel ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers ARM: OMAP1: nokia770: enable CBUS/Retu ARM: OMAP2+: omap2plus_defconfig: enable CMA allocator ARM: OMAP2+: omap2plus_defconfig: enable TFP410 chip support ARM: OMAP3: igep0020: simplify GPIO LEDs dependencies ARM: OMAP2+: craneboard: support the TPS65910 PMU ARM: OMAP2+: craneboard: support NAND device ARM: OMAP3: cm-t3517: add MMC support ARM: OMAP2+: Remove apollon board support ARM: shmobile: armadillo800eva: set clock rates before timer init ARM: tegra: defconfig updates ARM: shmobile: mackerel: Use gpio_request_one() ARM: shmobile: kzm9g: Use gpio_request_one() ARM: shmobile: bonito: Use gpio_request_one() ...
2013-01-23ARM: pxa: pxa27x.c: add dummy SA1100 rtc clockAndrea Adami1-0/+1
Using pxa27x you could now build both RTC_DRV_PXA and RTC_DRV_SA1100. Make sure you don't use both together: link /dev/rtc0 or /dev/rtc1 to /dev/rtc according to your requirement. Signed-off-by: Andrea Adami <andrea.adami@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2013-01-08ALSA: pxa27x: rename pxa27x_assert_ac97reset()Mike Dunn1-6/+14
This patch does nothing functionally, it just gives the function a new name and modifies the prototype slightly in order to clarify what the function is doing (which is not necessarily asserting the reset). Some commentary also added. Tested on a palm treo 680 machine. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-08ALSA: pxa27x: fix ac97 warm resetMike Dunn1-2/+2
This patch fixes some code that implements a work-around to a hardware bug in the ac97 controller on the pxa27x. A bug in the controller's warm reset functionality requires that the mfp used by the controller as the AC97_nRESET line be temporarily reconfigured as a generic output gpio (AF0) and manually held high for the duration of the warm reset cycle. This is what was done in the original code, but it was broken long ago by commit fb1bf8cd ([ARM] pxa: introduce processor specific pxa27x_assert_ac97reset()) which changed the mfp to a GPIO input instead of a high output. The fix requires the ac97 controller to obtain the gpio via gpio_request_one(), with arguments that configure the gpio as an output initially driven high. Tested on a palm treo 680 machine. Reportedly, this broken code only prevents a warm reset on hardware that lacks a pull-up on the line, which appears to be the case for me. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-09-14ARM: pxa: move platform_data definitionsArnd Bergmann1-1/+1
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the pxa include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Paul Parsons <lost.distance@yahoo.com> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Acked-By: Stefan Schmidt <stefan@openezx.org> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: Harald Welte <laforge@openezx.org> Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Tomas Cech <sleep_walker@suse.cz> Cc: Sergey Lapin <slapin@ossfans.org> Cc: Jonathan Cameron <jic23@cam.ac.uk> Cc: Dan Williams <djbw@fb.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Liam Girdwood <lrg@ti.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: openezx-devel@lists.openezx.org
2012-04-27ARM: pxa: fix gpio wakeup settingRobert Jarzmik1-1/+5
In 3.3, gpio wakeup setting was broken. The call enable_irq_wake() didn't set up the PXA gpio registers (PWER, ...) anymore. Fix it at least for pxa27x. The driver doesn't seem to be used in pxa25x (weird ...), and the fix doesn't extend to pxa3xx and pxa95x (which don't have a gpio_set_wake() available). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-03-06ARM: pxa: remove duplicated registeration on pxa-gpioHaojian Zhuang1-1/+0
Both reboot (via reboot(RB_AUTOBOOT)) and suspend freeze on hx4700. Registration of pxa_gpio_syscore_ops is moved into pxa-gpio driver, but it still exists in arch-pxa directory. It resulsts failure on reboot and suspend. Now remove the registration code in arch-pxa. Reported-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-03-06ARM: pxa: add dummy clock for pxa25x and pxa27xHaojian Zhuang1-0/+1
gpio-pxa driver is shared among arch-pxa and arch-mmp. Clock is the essential component on pxa3xx/pxa95x and arch-mmp. So we need to define dummy clock in pxa25x/pxa27x instead. This regression was introduced by the commit "ARM: pxa: add dummy clock for sa1100-rtc", id a55b5adaf403c4d032e0871ad4ee3367782f4db6. Reported-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2012-02-16ARM: pxa: fix including linux/gpio.h twiceDanny Kukawka1-1/+0
arch/arm/mach-pxa/pxa27x.c included 'linux/gpio.h' twice, remove the duplicate. Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-01-19Revert "ARM: pxa: add dummy clock for sa1100-rtc"Russell King1-2/+0
This reverts commit 7557c175f60d8d40baf16b22caf79beadef8f081. This revert is necessary to revert the broken "RTC: sa1100: support sa1100, pxa and mmp soc families" change.
2011-12-28Merge branch 'drivers/rtc-sa1100' into next/driversArnd Bergmann1-0/+1
* drivers/rtc-sa1100: ARM: sa1100: clean up of the clock support ARM: pxa: add dummy clock for sa1100-rtc RTC: sa1100: support sa1100, pxa and mmp soc families RTC: sa1100: remove redundant code of setting alarm RTC: sa1100: Clean out ost register Conflicts: arch/arm/mach-pxa/pxa25x.c arch/arm/mach-pxa/pxa27x.c
2011-12-28ARM: pxa: add dummy clock for sa1100-rtcJett.Zhou1-0/+2
Now sa1100-rtc can support sa1100/pxa/mmp soc series, then we need add dummy clock for sa1100-rtc. Signed-off-by: Jett.Zhou <jtzhou@marvell.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-11-15ARM: pxa: add clk support in gpio driverHaojian Zhuang1-0/+1
Support clk in gpio driver. There's no gpio clock in PXA25x and PXA27x. So use dummy clk instead. And move the gpio edge initialization into gpio driver for arch-mmp. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2011-11-15ARM: pxa: change gpio to platform deviceHaojian Zhuang1-1/+2
Remove most gpio macros and change gpio driver to platform driver. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2011-11-14ARM: pxa: rename gpio_to_irq and irq_to_gpioHaojian Zhuang1-1/+1
Avoid to define gpio_to_irq() and irq_to_gpio() for potential name confliction since multiple architecture will be built together. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2011-10-31Merge branch 'depends/rmk/gpio' into next/fixesArnd Bergmann1-1/+2
This sorts out merge conflicts with the arm/gpio branch that already got merged into mainline Linux. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-08ARM: pxa: use correct __iomem annotationsArnd Bergmann1-1/+1
This tries to clear up the confusion between integers and iomem pointers in the marvell pxa platform. MMIO addresses are supposed to be __iomem* values, in order to let the Linux type checking work correctly. This patch moves the cast to __iomem as far back as possible, to the place where the MMIO virtual address windows are defined. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-10-01ARM: 7104/1: plat-pxa: break out GPIO driver specificsLinus Walleij1-0/+1
The <mach/gpio.h> file is included from upper directories and deal with generic GPIO and gpiolib stuff. Break out the platform and driver specific defines and functions into its own header file. Cc: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-08ARM: gpio: convert includes of mach/gpio.h and asm/gpio.h to linux/gpio.hRussell King1-1/+1
Convert arch/arm includes of mach/gpio.h and asm/gpio.h to linux/gpio.h before we start consolidating the individual platform implementations of the gpio header files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-06-24ARM: pm: hide 1st and 2nd arguments to cpu_suspend from platform codeRussell King1-2/+2
The first and second arguments shouldn't concern platform code, so hide them from each platforms caller. Tested-by: Kevin Hilman <khilman@ti.com> Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-06-24ARM: pm: pxa: move cpu_suspend into C codeRussell King1-1/+10
We don't need a veneer for cpu_suspend, it can be called directly from C code now. Move it into the PXA CPU suspend functions, along with the accumulator register saving/restoring. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-24ARM / PXA: Use struct syscore_ops for "core" power managementRafael J. Wysocki1-19/+6
Replace sysdev classes and struct sys_device objects used for "core" power management by the PXA platform code with struct syscore_ops objects that are simpler. This reduces the code size and the kernel memory footprint. It also is necessary for removing sysdevs entirely from the kernel in the future. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13ARM: pxa: convert incorrect IRQ_TO_IRQ() to irq_to_gpio()Eric Miao1-1/+1
This fixes the failure to register the IRQ_RTCAlrm alarm as a wakeup event. It is misinterpreted as a gpio irq not a PWER bitmask. Fixed this by converting the incorrect IRQ_TO_IRQ() to a correct version of irq_to_gpio(). Reported-by: Nick Bane <nickbane1@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-03-21ARM: pxa2xx: reorganize I2C filesSebastian Andrzej Siewior1-2/+1
This patch moves the platform data definition from arch/arm/plat-pxa/include/plat/i2c.h to include/linux/i2c/pxa-i2c.h so it can be accessed from x86 the same way as on ARM. This change should make no functional change to the PXA code. The move is verified by building the following defconfigs: cm_x2xx_defconfig corgi_defconfig em_x270_defconfig ezx_defconfig imote2_defconfig pxa3xx_defconfig spitz_defconfig zeus_defconfig raumfeld_defconfig magician_defconfig mmp2_defconfig pxa168_defconfig pxa910_defconfig Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-02-22ARM: pm: convert PXA to generic suspend/resume supportRussell King1-2/+2
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-16 22:49:00 +0000