summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-orion5x
AgeCommit message (Collapse)AuthorFilesLines
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-1/+1
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-03-08ARM: orion5x: ts78xx: Remove unneeded variable retXu Wang1-2/+1
Remove unneeded variable ret used to store return value,just return 0. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2020-03-08ARM: orion5x: Drop unneeded select of PCI_DOMAINS_GENERICGeert Uytterhoeven1-2/+0
Support for Marvell Orion SoCs depends on ARCH_MULTI_V5, and thus on ARCH_MULTIPLATFORM. As the latter selects GENERIC_CLOCKEVENTS and USE_OF, there is no need for ARCH_ORION5X and ARCH_ORION5X_DT to select any of them. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Gregory Clement <gregory.clement@bootlin.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2019-08-14ARM: orion/mvebu: unify debug-ll virtual addressesArnd Bergmann1-2/+2
In a multiplatform configuration, enabling DEBUG_LL breaks booting on all platforms with incompatible settings. In case of the Marvell platforms of the Orion/MVEBU family, the physical addresses are all the same, we just map them at different virtual addresses, which makes it impossible to run a kernel with DEBUG_LL enabled on a combination of the merged mvebu and the legacy boardfile based platforms. This is easily solved by using the same virtual address everywhere. I picked the address that is already used by mach-mvebu for UART0: 0xfec12000. All these platforms have a 1MB region with their internal registers, almost always at physical address 0xf1000000, so I'm updating the iotable for that entry. In case of mach-dove, this is slightly trickier, as the existing mapping is 8MB and a second 8MB mapping is already at the 0xfec00000 address. I have verified from the datasheet that the last 7MB of the physical mapping are "reserved" and nothing in Linux tries to use it either. I'm putting this 1MB mapping at the same address as the others, and the second 8MB register area immediately before that. Link: https://lore.kernel.org/r/20190731195713.3150463-14-arnd@arndb.de Link: https://lore.kernel.org/linux-arm-kernel/87si3eb1z8.fsf@free-electrons.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner5-25/+5
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-15clk: Remove io.h from clk-provider.hStephen Boyd1-0/+1
Now that we've gotten rid of clk_readl() we can remove io.h from the clk-provider header and push out the io.h include to any code that isn't already including the io.h header but using things like readl/writel, etc. Found with this grep: git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \ xargs git grep -l \ -e '\<__iowrite32_copy\>' --or \ -e '\<__ioread32_copy\>' --or \ -e '\<__iowrite64_copy\>' --or \ -e '\<ioremap_page_range\>' --or \ -e '\<ioremap_huge_init\>' --or \ -e '\<arch_ioremap_pud_supported\>' --or \ -e '\<arch_ioremap_pmd_supported\>' --or \ -e '\<devm_ioport_map\>' --or \ -e '\<devm_ioport_unmap\>' --or \ -e '\<IOMEM_ERR_PTR\>' --or \ -e '\<devm_ioremap\>' --or \ -e '\<devm_ioremap_nocache\>' --or \ -e '\<devm_ioremap_wc\>' --or \ -e '\<devm_iounmap\>' --or \ -e '\<devm_ioremap_release\>' --or \ -e '\<devm_memremap\>' --or \ -e '\<devm_memunmap\>' --or \ -e '\<__devm_memremap_pages\>' --or \ -e '\<pci_remap_cfgspace\>' --or \ -e '\<arch_has_dev_port\>' --or \ -e '\<arch_phys_wc_add\>' --or \ -e '\<arch_phys_wc_del\>' --or \ -e '\<memremap\>' --or \ -e '\<memunmap\>' --or \ -e '\<arch_io_reserve_memtype_wc\>' --or \ -e '\<arch_io_free_memtype_wc\>' --or \ -e '\<__io_aw\>' --or \ -e '\<__io_pbw\>' --or \ -e '\<__io_paw\>' --or \ -e '\<__io_pbr\>' --or \ -e '\<__io_par\>' --or \ -e '\<__raw_readb\>' --or \ -e '\<__raw_readw\>' --or \ -e '\<__raw_readl\>' --or \ -e '\<__raw_readq\>' --or \ -e '\<__raw_writeb\>' --or \ -e '\<__raw_writew\>' --or \ -e '\<__raw_writel\>' --or \ -e '\<__raw_writeq\>' --or \ -e '\<readb\>' --or \ -e '\<readw\>' --or \ -e '\<readl\>' --or \ -e '\<readq\>' --or \ -e '\<writeb\>' --or \ -e '\<writew\>' --or \ -e '\<writel\>' --or \ -e '\<writeq\>' --or \ -e '\<readb_relaxed\>' --or \ -e '\<readw_relaxed\>' --or \ -e '\<readl_relaxed\>' --or \ -e '\<readq_relaxed\>' --or \ -e '\<writeb_relaxed\>' --or \ -e '\<writew_relaxed\>' --or \ -e '\<writel_relaxed\>' --or \ -e '\<writeq_relaxed\>' --or \ -e '\<readsb\>' --or \ -e '\<readsw\>' --or \ -e '\<readsl\>' --or \ -e '\<readsq\>' --or \ -e '\<writesb\>' --or \ -e '\<writesw\>' --or \ -e '\<writesl\>' --or \ -e '\<writesq\>' --or \ -e '\<inb\>' --or \ -e '\<inw\>' --or \ -e '\<inl\>' --or \ -e '\<outb\>' --or \ -e '\<outw\>' --or \ -e '\<outl\>' --or \ -e '\<inb_p\>' --or \ -e '\<inw_p\>' --or \ -e '\<inl_p\>' --or \ -e '\<outb_p\>' --or \ -e '\<outw_p\>' --or \ -e '\<outl_p\>' --or \ -e '\<insb\>' --or \ -e '\<insw\>' --or \ -e '\<insl\>' --or \ -e '\<outsb\>' --or \ -e '\<outsw\>' --or \ -e '\<outsl\>' --or \ -e '\<insb_p\>' --or \ -e '\<insw_p\>' --or \ -e '\<insl_p\>' --or \ -e '\<outsb_p\>' --or \ -e '\<outsw_p\>' --or \ -e '\<outsl_p\>' --or \ -e '\<ioread8\>' --or \ -e '\<ioread16\>' --or \ -e '\<ioread32\>' --or \ -e '\<ioread64\>' --or \ -e '\<iowrite8\>' --or \ -e '\<iowrite16\>' --or \ -e '\<iowrite32\>' --or \ -e '\<iowrite64\>' --or \ -e '\<ioread16be\>' --or \ -e '\<ioread32be\>' --or \ -e '\<ioread64be\>' --or \ -e '\<iowrite16be\>' --or \ -e '\<iowrite32be\>' --or \ -e '\<iowrite64be\>' --or \ -e '\<ioread8_rep\>' --or \ -e '\<ioread16_rep\>' --or \ -e '\<ioread32_rep\>' --or \ -e '\<ioread64_rep\>' --or \ -e '\<iowrite8_rep\>' --or \ -e '\<iowrite16_rep\>' --or \ -e '\<iowrite32_rep\>' --or \ -e '\<iowrite64_rep\>' --or \ -e '\<__io_virt\>' --or \ -e '\<pci_iounmap\>' --or \ -e '\<virt_to_phys\>' --or \ -e '\<phys_to_virt\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap\>' --or \ -e '\<__ioremap\>' --or \ -e '\<iounmap\>' --or \ -e '\<ioremap\>' --or \ -e '\<ioremap_nocache\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wt\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<xlate_dev_kmem_ptr\>' --or \ -e '\<xlate_dev_mem_ptr\>' --or \ -e '\<unxlate_dev_mem_ptr\>' --or \ -e '\<virt_to_bus\>' --or \ -e '\<bus_to_virt\>' --or \ -e '\<memset_io\>' --or \ -e '\<memcpy_fromio\>' --or \ -e '\<memcpy_toio\>' I also reordered a couple includes when they weren't alphabetical and removed clk.h from kona, replacing it with clk-provider.h because that driver doesn't use clk consumer APIs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: John Crispin <john@phrozen.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-17ARM: orion5x: Include platform_data/dsa.hFlorian Fainelli6-6/+6
Now that we have split the DSA platform data structures from the main net/dsa.h header file, include only the relevant header file. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23PCI: consolidate PCI config entry in drivers/pciChristoph Hellwig1-1/+1
There is no good reason to duplicate the PCI menu in every architecture. Instead provide a selectable HAVE_PCI symbol that indicates availability of PCI support, and a FORCE_PCI symbol to for PCI on and the handle the rest in drivers/pci. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Paul Burton <paul.burton@mips.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-10-03mtd: rawnand: Move platform_nand_xxx definitions out of rawnand.hBoris Brezillon1-2/+1
platform_nand_xxx definitions are just used by the plat_nand driver. Let's move those definitions out of the core/driver-agnostic rawnand.h header. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Create a legacy struct and move ->IO_ADDR_{R, W} thereBoris Brezillon1-3/+3
We regularly have new NAND controller drivers that are making use of fields/hooks that we want to get rid of but can't because of all the legacy drivers that we might break if we do. So, instead of removing those fields/hooks, let's move them to a sub-struct which is clearly documented as deprecated. We start with the ->IO_ADDR_{R,W] fields. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: plat_nand: Pass a nand_chip object to all platform_nand_ctrl hooksBoris Brezillon1-11/+7
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. In order to do that, we first need to update the platform_nand_ctrl hooks to take a nand_chip object instead of an mtd_info. We add temporary plat_nand_xxx() wrappers to the do the mtd -> chip conversion, but those will be dropped when patching nand_chip hooks to take a nand_chip object. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Krzysztof Halasa <khalasa@piap.pl> Acked-by: Paul Burton <paul.burton@mips.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-02-26ARM: orion5x: Revert commit 4904dbda41c8.David S. Miller3-10/+95
It is not valid for orion5x to use mac_pton(). First of all, the orion5x buffer is not NULL terminated. mac_pton() has no business operating on non-NULL terminated buffers because only the caller can know that this is valid and in what manner it is ok to parse this NULL'less buffer. Second of all, orion5x operates on an __iomem pointer, which cannot be dereferenced using normal C pointer operations. Accesses to such areas much be performed with the proper iomem accessors. Fixes: 4904dbda41c8 ("ARM: orion5x: use mac_pton() helper") Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-21treewide: setup_timer() -> timer_setup()Kees Cook1-2/+2
This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman5-0/+5
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-13mtd: nand: Rename nand.h into rawnand.hBoris Brezillon4-4/+4
We are planning to share more code between different NAND based devices (SPI NAND, OneNAND and raw NANDs), but before doing that we need to move the existing include/linux/mtd/nand.h file into include/linux/mtd/rawnand.h so we can later create a nand.h header containing all common structure and function prototypes. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Peter Pan <peterpandong@micron.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Acked-by: Wenyou Yang <wenyou.yang@microchip.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Han Xu <han.xu@nxp.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-By: Harvey Hunt <harveyhuntnexus@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Krzysztof Halasa <khalasa@piap.pl>
2017-06-28ARM/PCI: Convert PCI scan API to pci_scan_root_bus_bridge()Lorenzo Pieralisi2-9/+19
The introduction of pci_scan_root_bus_bridge() provides a PCI core API to scan a PCI root bus backed by an already initialized struct pci_host_bridge object, which simplifies the bus scan interface and makes the PCI scan root bus interface easier to generalize as members are added to the struct pci_host_bridge. Convert ARM bios32 code to pci_scan_root_bus_bridge() to improve the PCI root bus scanning interface. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> [bhelgaas: fold in warning fix from Arnd Bergmann <arnd@arndb.de>: http://lkml.kernel.org/r/20170621215323.3921382-1-arnd@arndb.de] [bhelgaas: set bridge->ops for mv78xx0] [bhelgaas: fold in fixes from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>: http://lkml.kernel.org/r/20170701135457.GB8977@red-moon] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Russell King <linux@armlinux.org.uk> Cc: Andrew Lunn <andrew@lunn.ch>
2017-03-30ARM: orion5x: only call into phylib when availableArnd Bergmann1-0/+1
Board code cannot call mdiobus_register_board_info() when phylib or mdio_device is a loadable module: arch/arm/plat-orion/common.o: In function `orion_ge00_switch_init': :(.init.text+0x474): undefined reference to `mdiobus_register_board_info' I had a number of ideas for how this could be solved, but after the MDIO code got split out from PHYLIB it has gotten too hard, so I'm basically giving up, and only call the mdiobus_register_board_info() function if the MDIO layer is built-in to avoid the link error. This is similar to how we handle PHY registration on other ARM platforms. Fixes: 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs") Fixes: 648ea0134069 ("net: phy: Allow pre-declaration of MDIO devices") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-02-27Merge tag 'rtc-4.11' of ↵Linus Torvalds1-61/+19
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Subsystem: - constify rtc_class_ops structures New driver: - STM32 Drivers: - armada38x: fix errata, Armada 7K/8K support - ds3232: fix wakeup support - gemini: DT support - m48t86: huge cleanup and platform_data removal - mcp795: alarm support - sun6i: proper oscillator handling - tegra: proper clock handling - tps65910: calibration support" * tag 'rtc-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (44 commits) rtc: ds3232: Call device_init_wakeup before device_register rtc: pcf2127: bulk read only date and time registers. rtc: armada38x: Add support for Armada 7K/8K rtc: armada38x: Prepare driver to manage different versions rtc: ds3232: Add regmap max_register definition. rtc: ds3232: Cleanup whitespace around register and bit definitions. rtc: m48t86: remove unused platform_data ARM: Orion5x: ts78xx: allow rtc-m48t86 to manage it's own resources ARM: Orion5x: ts78xx: remove RTC detection ARM: ep93xx: ts72xx: allow rtc-m48t86 to manage its own resources rtc: m48t86: verify that the RTC is actually present rtc: m48t86: add NVRAM support rtc: m48t86: allow driver to manage its resources rtc: m48t86: shorten register name defines bindings: rtc: correct wrong reference in required properties rtc: sun6i: Fix return value check in sun6i_rtc_clk_init() rtc: sun6i: extend test coverage rtc: sun6i: Fix compatibility with old DT binding rtc: snvs: add a missing write sync rtc: bq32000: add support to enable disable the trickle charge FET bypass ...
2017-02-21ARM: Orion5x: ts78xx: allow rtc-m48t86 to manage it's own resourcesH Hartley Sweeten1-22/+7
The rtc-m48t86 driver can now handle it's own resources and do the read/write operations internally. Pass the necessary resources to the driver and remove the m48t86_ops platform data. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-By: Alexander Clouter <alex+kernel@digriz.org.uk> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-02-21ARM: Orion5x: ts78xx: remove RTC detectionH Hartley Sweeten1-39/+12
The rtc-m48t86 driver now handles the RTC detection. Remove the redundant code from the platform. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-By: Alexander Clouter <alex+kernel@digriz.org.uk> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-02-09ARM: orion: remove unused wnr854t_switch_plat_dataArnd Bergmann1-5/+0
The other instances of this structure got removed along with the MDIO device change, but this one was left behind and needs to be removed as well: arch/arm/mach-orion5x/wnr854t-setup.c:109:44: error: 'wnr854t_switch_plat_data' defined but not used [-Werror=unused-variable] static struct dsa_platform_data __initdata wnr854t_switch_plat_data = { Fixes: 575e93f7b5e6 ("ARM: orion: Register DSA switch as a MDIO device") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07ARM: orion: Register DSA switch as a MDIO deviceFlorian Fainelli7-28/+8
Utilize the ability to pass board specific MDIO bus information towards a particular MDIO device thus allowing us to provide the per-port switch layout to the Marvell 88E6XXX switch driver. Since we would end-up with conflicting registration paths, do not register the "dsa" platform device anymore. Note that the MDIO devices registered by code in net/dsa/dsa2.c does not parse a dsa_platform_data, but directly take a dsa_chip_data (specific to a single switch chip), so we update the different call sites to pass this structure down to orion_ge00_switch_init(). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-19ARM: orion5x: remove legacy support of ls-chlAshley Hughes3-339/+0
This patch removes the legacy support of ls-chl which is converted to the device tree. [gregory.clement@free-electrons.com: removal extracted from a wider patch] Signed-off-by: Ashley Hughes <ashley.hughes@blueyonder.co.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-09-14ARM: orion5x: remove extraneous NO_IRQArnd Bergmann1-1/+0
rd88f6183ap-ge passes NO_IRQ as the interrupt line for its m25p80 NOR flash. However, this device never uses an interrupt and the driver doesn't care, so we can simply remove the deprecated constant here. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-09-14ARM: orion: simplify orion_ge00_switch_initArnd Bergmann7-15/+13
One of the last users of NO_IRQ on ARM is the switch initialization code on orion5x, which sometimes passes a GPIO based IRQ number. However, the driver doesn't actually use this number, and according to Andrew Lunn never will do it for non-DT based machines, so we can simply drop the irq argument. Simplifying it further, we can also drop the static platform_device and instead call platform_device_register_data(), which in turn lets us mark the platform_data structures as __initdata and slightly reduce the memory consumption. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-08-05Merge tag 'rtc-4.8' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "RTC for 4.8 Cleanups: - huge cleanup of rtc-generic and char/genrtc this allowed to cleanup rtc-cmos, rtc-sh, rtc-m68k, rtc-powerpc and rtc-parisc - move mn10300 to rtc-cmos Subsystem: - fix wakealarms after hibernate - multiples fixes for rctest - simplify implementations of .read_alarm New drivers: - Maxim MAX6916 Drivers: - ds1307: fix weekday - m41t80: add wakeup support - pcf85063: add support for PCF85063A variant - rv8803: extend i2c fix and other fixes - s35390a: fix alarm reading, this fixes instant reboot after shutdown for QNAP TS-41x - s3c: clock fixes" * tag 'rtc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (65 commits) rtc: rv8803: Clear V1F when setting the time rtc: rv8803: Stop the clock while setting the time rtc: rv8803: Always apply the I²C workaround rtc: rv8803: Fix read day of week rtc: rv8803: Remove the check for valid time rtc: rv8803: Kconfig: Indicate rx8900 support rtc: asm9260: remove .owner field for driver rtc: at91sam9: Fix missing spin_lock_init() rtc: m41t80: add suspend handlers for alarm IRQ rtc: m41t80: make it a real error message rtc: pcf85063: Add support for the PCF85063A device rtc: pcf85063: fix year range rtc: hym8563: in .read_alarm set .tm_sec to 0 to signal minute accuracy rtc: explicitly set tm_sec = 0 for drivers with minute accurancy rtc: s3c: Add s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq() rtc: s3c: Remove unnecessary call to disable already disabled clock rtc: abx80x: use devm_add_action_or_reset() rtc: m41t80: use devm_add_action_or_reset() rtc: fix a typo and reduce three empty lines to one rtc: s35390a: improve two comments in .set_alarm ...
2016-08-01Merge tag 'armsoc-cleanup' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "The cleanup branch keeps going down in size as we've completed a lot of the major legacy platform removals and conversions. A handful of changes this time around, some of the themes or larger sets are: - A bunch of i.MX cleanups around platform detection, init call cleanups - Misc fixes of missing/implicit includes - Removal of ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB" * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (40 commits) ARM: mps2: fix typo ARM: s3c64xx: avoid warning about 'struct device_node' bus: mvebu-mbus: make mvebu_mbus_syscore_ops static bus: mvebu-mbus: fix __iomem on register pointers ARM: tegra: Remove board_init_funcs array ARM: iop: Fix indentation ARM: imx: remove cpu_is_mx*() ARM: imx: remove last call to cpu_is_mx5* ARM: imx: rework mx27_pm_init() call ARM: imx: deconstruct mx3_idle ARM: imx: deconstruct mxc_rnga initialization ARM: imx: remove cpu_is_mx1 check ARM: i.MX: Do not explicitly call l2x0_of_init() ARM: i.MX: system.c: Tweak prefetch settings for performance ARM: i.MX: system.c: Replace magic numbers ARM: i.MX: system.c: Remove redundant errata 752271 code ARM: i.MX: system.c: Convert goto to if statement ARM: Kirkwood: fix kirkwood_pm_init() declaration/type ARM: Kirkwood: make kirkwood_disable_mbus_error_propagation() static ARM: orion5x: make orion5x_legacy_handle_irq static ...
2016-07-04Merge tag 'mvebu-cleanup-4.8-1' of git://git.infradead.org/linux-mvebu into ↵Olof Johansson1-1/+1
next/cleanup mvebu cleanup for 4.8 (part 1) Various warning fixes * tag 'mvebu-cleanup-4.8-1' of git://git.infradead.org/linux-mvebu: ARM: Kirkwood: fix kirkwood_pm_init() declaration/type ARM: Kirkwood: make kirkwood_disable_mbus_error_propagation() static ARM: orion5x: make orion5x_legacy_handle_irq static mvebu: add definition for coherency_base mvebu: make mvebu_armada375_smp_wa_init() static mvebu: fix missing include of common.h in cpu-reset.c mvebu: fix missing include of common.h in pm.c mvebu: fix missing includes in pmsu.c Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-27rtc: m48t86: move m48t86.h to platform_dataAlexandre Belloni1-1/+1
m48t86.h belongs to include/linux/platform_data/ Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Alexander Clouter <alex@digriz.org.uk> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-23arm: use of_platform_default_populate() to populateKefeng Wang1-2/+1
Use helper of_platform_default_populate() in linux/of_platform when possible, instead of calling of_platform_populate() with the default match table. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Krzysztof Halasa <khalasa@piap.pl> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Roland Stigge <stigge@antcom.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Ray Jui <rjui@broadcom.com> Cc: Viresh Kumar <vireshk@kernel.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Rob Herring <robh@kernel.org> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-06-16ARM: orion5x: make orion5x_legacy_handle_irq staticBen Dooks1-1/+1
The orion5x_legacy_handle_irq() is not used or declared outside of irq.c so make it static to avoid the following warning: arch/arm/mach-orion5x/irq.c:30:23: warning: symbol 'orion5x_legacy_handle_irq' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-06-03ARM: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIBLinus Walleij1-1/+1
This replaces: - "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB" as this can now be selected directly. - "select ARCH_WANT_OPTIONAL_GPIOLIB" with no dependency: GPIOLIB is now selectable by everyone, so we need not declare our intent to select it. When ordering the symbols the following rationale was used: if the selects were in alphabetical order, I moved select GPIOLIB to be in alphabetical order, but if the selects were not maintained in alphabetical order, I just replaced "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB". Cc: Michael Büsch <m@bues.ch> Cc: arm@kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-04-27ARM: orion5x: Remove CLK_IS_ROOTStephen Boyd1-2/+1
This flag is a no-op now (see commit 47b0eeb3dc8a "clk: Deprecate CLK_IS_ROOT", 2016-02-02) so remove it. Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-03-20Merge tag 'armsoc-cleanup' of ↵Linus Torvalds1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Arnd Bergmann: "A few simple cleanups across multiple platforms, not much standing out: - lpc32xx removes its private implementation of the clk API, after generic code was merged in 4.5 - all unused Makefile.boot files get removed - a number of simplifications for shmobile - asm/clkdev.h gets replaced with the asm-generic version after all mach/clkdev.h implementations are gone" * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: shmobile: Kconfig: Get rid of old comment ARM: shmobile: Consolidate SCU mapping code arm: lpc32xx: remove direct control of GPIOs from shared mach file arm: lpc32xx: remove selected HAVE_IDE arm: lpc32xx: switch to common clock framework ARM: Use generic clkdev.h header ARM: plat-versatile: Remove unused clock.c file ARM: netx: remove redundant "depends on ARCH_NETX" ARM: integrator: remove redundant select in Kconfig ARM: drop unused Makefile.boot of Multiplatform SoCs ARM: mvebu: add missing of_node_put() ARM: shmobile: r8a7779: Remove remainings of removed SCU boot setup code ARM: shmobile: Typo s/MIPDR/MPIDR/ ARM: shmobile: Add includes providing forward declarations ARM: shmobile: rcar-gen2: Make rcar_gen2_dma_contiguous static ARM: mv78xx0: use "depends on" instead of "if" after prompt
2016-02-25ARM: orion: only select I2C_BOARDINFO when using I2CArnd Bergmann1-9/+9
If we select I2C_BOARDINFO and I2C is disabled, we get a harmless Kconfig warning: warning: (MACH_DOVE_DB && MACH_DB88F5281 && MACH_RD88F5182 && MACH_RD88F5182_DT && MACH_KUROBOX_PRO && MACH_DNS323 && MACH_LINKSTATION_PRO && MACH_LINKSTATION_LSCHL && MACH_LINKSTATION_LS_HGL && MACH_NET2BIG) selects I2C_BOARDINFO which has unmet direct dependencies (I2C) Making the select itself conditional avoids the warning and makes the kernel slightly smaller as the compiler will be able to drop the unused board info. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-02-08ARM: drop unused Makefile.boot of Multiplatform SoCsMasahiro Yamada1-3/+0
The variable "MACHINE" is empty if CONFIG_ARCH_MULTIPLATFORM=y, so these Makefile.boot files are never included. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Michal Simek <michal.simek@xilinx.com> (for Zynq) Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-01-20Merge tag 'armsoc-multiplatform' of ↵Linus Torvalds34-141/+81
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC multiplatform code updates from Arnd Bergmann: "This branch is the culmination of 5 years of effort to bring the ARMv6 and ARMv7 platforms together such that they can all be enabled and boot the same kernel. It has been a tremendous amount of cleanup and refactoring by a huge number of people, and creation of several new (and major) subsystems to better abstract out all the platform details in an appropriate manner. The bulk of this branch is a large patchset from Arnd that brings several of the more minor and older platforms we have closer to multiplatform support. Among these are MMP, S3C64xx, Orion5x, mv78xx0 and realview Much of this is moving around header files from old mach directories, but there are also some cleanup patches of debug_ll (lowlevel debug per-platform options) and other parts. Linus Walleij also has some patchs to clean up the older ARM Realview platforms by finally introducing DT support, and Rob Herring has some for ARM Versatile which is now DT-only. Both of these platforms are now multiplatform. Finally, a couple of patches from Russell for Dove PMU, and a fix from Valentin Rothberg for Exynos ADC, which were rebased on top of the series to avoid conflicts" * tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits) ARM: realview: don't select SMP_ON_UP for UP builds ARM: s3c: simplify s3c_irqwake_{e,}intallow definition ARM: s3c64xx: fix pm-debug compilation iio: exynos-adc: fix irqf_oneshot.cocci warnings ARM: realview: build realview-dt SMP support only when used ARM: realview: select apropriate targets ARM: realview: clean up header files ARM: realview: make all header files local ARM: no longer make CPU targets visible separately ARM: integrator: use explicit core module options ARM: realview: enable multiplatform ARM: make default platform work for NOMMU ARM: debug-ll: move DEBUG_LL_UART_EFM32 to correct Kconfig location ARM: defconfig: use correct debug_ll settings ARM: versatile: convert to multi-platform ARM: versatile: merge mach code into a single file ARM: versatile: switch to DT only booting and remove legacy code ARM: versatile: add DT based PCI detection ARM: pxa: mark ezx structures as __maybe_unused ARM: pxa: mark raumfeld init functions as __maybe_unused ...
2016-01-13Merge tag 'for-linus-20160112' of git://git.infradead.org/linux-mtdLinus Torvalds1-3/+3
Pull MTD updates from Brian Norris: "Generic MTD: - populate the MTD device 'of_node' field (and get a proper 'of_node' symlink in sysfs) This yielded some new helper functions, and changes across a variety of drivers - partitioning cleanups, to prepare for better device-tree based partitioning in the future Eliminate a lot of boilerplate for drivers that want to use OF-based partition parsing The DT bindings for this didn't settle yet, so most non-cleanup portions are deferred for a future release NAND: - embed a struct mtd_info inside struct nand_chip This is really long overdue; too many drivers have to do the same silly boilerplate to allocate and link up two "independent" structs, when in fact, everyone is assuming there is an exact 1:1 relationship between a NAND chips struct and its underlying MTD. This aids improved helpers and should make certain abstractions easier in the future. Also causes a lot of churn, helped along by some automated code transformations - add more core support for detecting (and "correcting") bitflips in erased pages; requires opt-in by drivers, but at least we kill a few bad implementations and hopefully stave off future ones - pxa3xx_nand: cleanups, a few fixes, and PM improvements - new JZ4780 NAND driver SPI NOR: - provide default erase function, for controllers that just want to send the SECTOR_ERASE command directly - fix some module auto-loading issues with device tree ("jedec,spi-nor") - error handling fixes - new Mediatek QSPI flash driver Other: - cfi: force valid geometry Kconfig (finally!) This one used to trip up randconfigs occasionally, since bots aren't deterred by big scary "advanced configuration" menus More? Probably. See the commit logs" * tag 'for-linus-20160112' of git://git.infradead.org/linux-mtd: (168 commits) mtd: jz4780_nand: replace if/else blocks with switch/case mtd: nand: jz4780: Update ecc correction error codes mtd: nandsim: use nand_get_controller_data() mtd: jz4780_nand: remove useless mtd->priv = chip assignment staging: mt29f_spinand: make use of nand_set/get_controller_data() helpers mtd: nand: make use of nand_set/get_controller_data() helpers ARM: make use of nand_set/get_controller_data() helpers mtd: nand: add helpers to access ->priv mtd: nand: jz4780: driver for NAND devices on JZ4780 SoCs mtd: nand: jz4740: remove custom 'erased check' implementation mtd: nand: diskonchip: remove custom 'erased check' implementation mtd: nand: davinci: remove custom 'erased check' implementation mtd: nand: use nand_check_erased_ecc_chunk in default ECC read functions mtd: nand: return consistent error codes in ecc.correct() implementations doc: dt: mtd: new binding for jz4780-{nand,bch} mtd: cfi_cmdset_0001: fixing memory leak and handling failed kmalloc mtd: spi-nor: wait until lock/unlock operations are ready mtd: tests: consolidate kmalloc/memset 0 call to kzalloc jffs2: use to_delayed_work mtd: nand: assign reasonable default name for NAND drivers ...
2015-12-07ARM: nand: make use of mtd_to_nand() where appropriateBoris BREZILLON1-3/+3
mtd_to_nand() was recently introduced to avoid direct accesses to the mtd->priv field. Update all ARM specific implementations to use this helper. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-12-07ARM: orion5x: multiplatform supportArnd Bergmann3-50/+16
The orion5x platform is now ready to be enabled for multiplatform support, this patch does the switch over by modifying the Kconfig file, the defconfig and removing the last mach/*.h header that becomes obsolete with this. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-12-07ARM: orion5x: clean up mach/*.h headersArnd Bergmann31-55/+33
This is a simple move of all header files that are no longer included by anything else from the include/mach directory to the platform directory itself as preparation for multiplatform support. The mach/uncompress.h headers are left in place for now, and are mildly modified to be independent of the other headers. They will be removed entirely when ARCH_MULTIPLATFORM gets enabled and they become obsolete. Rather than updating the path names inside of the comments of each header, I delete those comments to avoid having to update them again, should they get moved or copied another time. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-12-07ARM: orion: use SPARSE_IRQ everywhereArnd Bergmann19-1/+21
As a preparation for multiplatform support, this moves all the code using plat-orion over to use sparse irq support, which is enabled implicitly for multiplatform. In particular, the hardcoded NR_IRQS macro gets replaced with a machine specific one that is set in the machine descriptor in order to set up a static mapping for all legacy interrupts. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-12-07ARM: orion: always use MULTI_IRQ_HANDLERArnd Bergmann2-36/+0
As a preparation for multiplatform support, this enables the MULTI_IRQ_HANDLER code unconditionally on dove and orion5x, and introduces the respective code on mv78xx0, which did not have it so far. The classic entry-macro.S files are removed as they are now obsolete. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-12-07ARM: orion: move watchdog setup to mach-orion5xArnd Bergmann1-1/+13
The watchdog device node is created in plat-orion/common.c but depends on the bridge address that is platform specific, so as a preparation for orion multiplatform support, we move it out of the common code into orion5x and dove. At the moment, dove does not use the watchdog, so I'm marking the function as __maybe_unused for the moment. The compiler will be able to compile out the device definition this way, and we can easily add it later. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-11-25ARM: orion5x: Fix legacy get_irqnr_and_baseNicolas Pitre1-1/+1
Commit 5be9fc23cd ("ARM: orion5x: fix legacy orion5x IRQ numbers") shifted IRQ numbers by one but didn't update the get_irqnr_and_base macro accordingly. This macro is involved when CONFIG_MULTI_IRQ_HANDLER is not defined. [jac: 5d6bed2a9c went in to v4.2, but was backported to v3.18] Signed-off-by: Nicolas Pitre <nico@linaro.org> Fixes: 5be9fc23cd ("ARM: orion5x: fix legacy orion5x IRQ numbers") Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-10-23ARM: orion5x: use mac_pton() helperAndy Shevchenko3-95/+10
Instead of custom approach let's use generic helper function. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Detlef Vollmann <dv@vollmann.ch> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Tested-by: Detlef Vollmann <dv@vollmann.ch> #on DNS-323 Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-09-01Merge tag 'armsoc-dt' of ↵Linus Torvalds3-284/+3
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Olof Johansson: "Ladies and gentlemen, we proudly announce to you the latest branch of ARM device tree contents for the mainline kernel. Come and see, come and see! No less than twentythree thousand lines of additions! Just imagine the joy you will have of using your mainline kernel on newly supported hardware such as Rockchip Chromebooks, Freescale i.MX6UL boards or UniPhier hardware! For those of you feeling less adventurous, added hardware support on platforms such as TI DM814x and Gumstix Overo platforms might be more of your liking. We've got something for everyone here! Ahem. Cough. So, anyway... This is the usual large batch of DT updates. Lots and lots of smaller changes, some of the larger ones to point out are: - Rockchip veyron (Chromebook) support, as well as several other new boards - DRM support on Atmel AT91SAM9N12EK - USB additions on some Allwinner platforms - Mediatek MT6580 support - Freescale i.MX6UL support - cleanups for Renesas shmobile platforms - lots of added devices on LPC18xx - lots of added devices and boards on UniPhier There's also some dependent code added here, in particular some branches that are primarily merged through the clock tree" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (389 commits) ARM: tegra: Add gpio-ranges property ARM: tegra: Fix AHB base address on Tegra20, Tegra30 and Tegra114 ARM: tegra: Add Tegra124 PMU support ARM: tegra: jetson-tk1: Add GK20A GPU DT node ARM: tegra: venice2: Add GK20A GPU DT node ARM: tegra: Add IOMMU node to GK20A ARM: tegra: Add CPU regulator to the Jetson TK1 device tree ARM: tegra: Add entries for cpufreq on Tegra124 ARM: tegra: Enable the DFLL on the Jetson TK1 ARM: tegra: Add the DFLL to Tegra124 device tree ARM: dts: zynq: Add devicetree entry for Xilinx Zynq reset controller. ARM: dts: UniPhier: fix PPI interrupt CPU mask of timer nodes ARM: dts: rockchip: correct regulator power states for suspend ARM: dts: rockchip: correct regulator PM properties ARM: dts: vexpress: Use assigned-clock-parents for sp810 pinctrl: tegra: Only set the gpio range if needed arm: boot: dts: am4372: add ARM timers and SCU nodes ARM: dts: AM4372: Add the am4372-rtc compatible string ARM: shmobile: r8a7794 dtsi: Add CPG/MSTP Clock Domain ARM: shmobile: r8a7793 dtsi: Add CPG/MSTP Clock Domain ...
2015-09-01Merge tag 'armsoc-cleanup' of ↵Linus Torvalds2-6/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "A large cleanup branch this release, with a healthy 10k negative line delta. Most of this is removal of legacy (non-DT) support of shmobile platforms. There is also removal of two non-DT platforms on OMAP, and the plat-samsung directory is cleaned out by moving most of the previously shared-location-but-not-actually-shared files from there to the appropriate mach directories instead. There are other sets of changes in here as well: - Rob Herring removed use of set_irq_flags under all platforms and moved to genirq alternatives - a series of timer API conversions to set-state interface - ep93xx, nomadik and ux500 cleanups from Linus Walleij - __init annotation fixes from Nicolas Pitre + a bunch of other changes that all add up to a nice set of cleanups" * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (108 commits) ARM/fb: ep93xx: switch framebuffer to use modedb only ARM: gemini: Setup timer3 as free running timer ARM: gemini: Use timer1 for clockevent ARM: gemini: Add missing register definitions for gemini timer ARM: ep93xx/timer: Migrate to new 'set-state' interface ARM: nomadik: push accelerometer down to boards ARM: nomadik: move l2x0 setup to device tree ARM: nomadik: selectively enable UART0 on boards ARM: nomadik: move hog code to use DT hogs ARM: shmobile: Fix mismerges ARM: ux500: simplify secondary CPU boot ARM: SAMSUNG: remove keypad-core header in plat-samsung ARM: SAMSUNG: local watchdog-reset header in mach-s3c64xx ARM: SAMSUNG: local onenand-core header in mach-s3c64xx ARM: SAMSUNG: local irq-uart header in mach-s3c64xx ARM: SAMSUNG: local backlight header in mach-s3c64xx ARM: SAMSUNG: local ata-core header in mach-s3c64xx ARM: SAMSUNG: local regs-usb-hsotg-phy header in mach-s3c64xx ARM: SAMSUNG: local spi-core header in mach-s3c24xx ARM: SAMSUNG: local nand-core header in mach-s3c24xx ...
2015-09-01Merge tag 'armsoc-fixes-nc' of ↵Linus Torvalds2-34/+34
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC non-urgent fixes from Olof Johansson: "We normally collect non-urgent fixes during the release cycle and queue them for the merge window. This time around the list is short (in part because some have gone in other branches). - Maintainers addition for bcm2835 - IRQ number fix for orion5x (been present since 3.18) - DT fix for display on exynos3250 - Exynos fix to use of IOMEM_ERR_PTR properly" * tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: orion5x: fix legacy orion5x IRQ numbers MAINTAINERS: Explicitly add linux-arm-kernel for bcm2835 MAINTAINERS: Add myself as a bcm2835 co-maintainer. ARM: EXYNOS: Use IOMEM_ERR_PTR when function returns iomem ARM: dts: fix clock-frequency of display timing0 for exynos3250-rinato