summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/prm3xxx.c
AgeCommit message (Collapse)AuthorFilesLines
2019-06-28Merge tag 'armsoc-fixes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "A smaller batch of fixes, nothing that stands out as risky or scary. Mostly DTS tweaks for a few issues: - GPU fixlets for Meson - CPU idle fix for LS1028A - PWM interrupt fixes for i.MX6UL Also, enable a driver (FSL_EDMA) on arm64 defconfig, and a warning and two MAINTAINER tweaks" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: dts: imx6ul: fix PWM[1-4] interrupts ARM: omap2: remove incorrect __init annotation ARM: dts: gemini Fix up DNS-313 compatible string ARM: dts: Blank D-Link DIR-685 console arm64: defconfig: Enable FSL_EDMA driver arm64: dts: ls1028a: Fix CPU idle fail. MAINTAINERS: BCM53573: Add internal Broadcom mailing list MAINTAINERS: BCM2835: Add internal Broadcom mailing list ARM: dts: meson8b: fix the operating voltage of the Mali GPU ARM: dts: meson8b: drop undocumented property from the Mali GPU node ARM: dts: meson8: fix GPU interrupts and drop an undocumented property
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19ARM: omap2: remove incorrect __init annotationArnd Bergmann1-1/+1
omap3xxx_prm_enable_io_wakeup() is marked __init, but its caller is not, so we get a warning with clang-8: WARNING: vmlinux.o(.text+0x343c8): Section mismatch in reference from the function omap3xxx_prm_late_init() to the function .init.text:omap3xxx_prm_enable_io_wakeup() The function omap3xxx_prm_late_init() references the function __init omap3xxx_prm_enable_io_wakeup(). This is often because omap3xxx_prm_late_init lacks a __init annotation or the annotation of omap3xxx_prm_enable_io_wakeup is wrong. When building with gcc, omap3xxx_prm_enable_io_wakeup() is always inlined, so we never noticed in the past. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-10-10ARM: OMAP3: Remove legacy IRQ for PRMTony Lindgren1-4/+10
We have this coming from device tree and legacy booting is no longer needed. Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-15ARM: OMAP3+: PRM: fix of_irq_get() result checkSergei Shtylyov1-1/+1
of_irq_get() may return 0 as well as a nagative error number on failure (and never on success), however omap3xxx_prm_late_init() regards 0 as a valid IRQ -- fix this. Fixes: 1e037794f7f ("ARM: OMAP3+: PRM: register interrupt information from DT") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-06-29ARM: OMAP2+: Fix omap3 prm shared irqTony Lindgren1-6/+1
Shared interrupts with IRQ_NOAUTOEN got a warning added with commit 04c848d39879 ("genirq: Warn when IRQ_NOAUTOEN is used with shared interrupts"). Let's just drop the IRQ_NOAUTOEN use for omap3 PRM shared interrupt as it does not seem to cause any other issues based on my testing. We have moved a lot of the code to initialize later, and whatever problems the legacy booting had seem to be gone now with pinctrl driver and device tree based booting. Otherwise we will get: WARNING: CPU: 0 PID: 1 at kernel/irq/manage.c:1348 __setup_irq+0x5d0/0x64c [<c01b0260>] (__setup_irq) from [<c01b0480>] (request_threaded_irq+0xdc/0x188) [<c01b0480>] (request_threaded_irq) from [<c051c780>] (pcs_probe+0x6ec/0x8a4) [<c051c780>] (pcs_probe) from [<c05a84b8>] (platform_drv_probe+0x50/0xb0) [<c05a84b8>] (platform_drv_probe) from [<c05a6288>] (driver_probe_device+0x33c/0x478) Note that we also need to remove the related enable_irq() to avoid getting the following: WARNING: CPU: 0 PID: 1 at kernel/irq/manage.c:529 enable_irq+0x34/0x70 [<c01afa04>] (enable_irq) from [<c0c0f1fc>] (omap3_pm_init+0x118/0x3f8) [<c0c0f1fc>] (omap3_pm_init) from [<c0c0ae7c>] (am35xx_init_late+0x10/0x18) Cc: Kevin Hilman <khilman@baylibre.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-06-12Merge branch 'omap-for-v4.13/clkctrl' into omap-for-v4.13/soc-v4Tony Lindgren1-1/+1
2017-06-08ARM: OMAP2+: Remove unused legacy code for PRMTony Lindgren1-10/+7
We are now booting all mach-omap2 in device tree only mode. Any code that is only called in legacy boot mode where of_have_populated_dt() is not set is safe to remove now. Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-06-06ARM: OMAP2+: PRCM: store also physical addresses for instancesTero Kristo1-1/+1
In some cases the physical address info is needed, so store this under the existing cm*_base, prm_base and prcm_mpu_base variables. These are converted now to structs that contain both virtual and physical address base for the instance. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-11-07ARM: OMAP2+: PRM: initialize en_uart4_mask and grpsel_uart4_maskColin Ian King1-0/+3
In the case where has_uart4 is false, en_uart4_mask and grpsel_uart4_mask are not initialized and so any garbage value is being logically or'd into the write of PM_WKEN and OMAP3430_PM_MPUGRPSEL. Fix this by initializing these masks to zero. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-31ARM: OMAP2+: PRM: move SoC specific init calls within a generic APITero Kristo1-3/+1
This gets rid of need for some exported driver APIs, and simplifies the initialization of the PRM driver. Done in preparation to make PRM a separate driver. The init data is now also passed to the SoC specific implementations, allowing future expansion to add feature flags etc. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-03-27ARM: OMAP2+: PRM: determine PRM base address from device treeTero Kristo1-0/+5
There is no need to provide the PRM base address through a low-level API from the low-level IO init, as this information is available through DT. Re-routed the parsing function to be called from the PRM drivers also to simplify the implementation under io.c. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-03-25ARM: OMAP3+: PRM: add common APIs for prm_vp_check/clear_txdoneTero Kristo1-2/+4
PRM driver now only exports a generic API for clearing / checking VP txdone status. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-03-25ARM: OMAP2+: PRM: add generic API for clear_mod_irqsTero Kristo1-1/+2
OMAP2/3 now use generic API for the prm_clear_mod_irqs, the SoC specific implementation details are provided through prm_ll_data. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-03-25ARM: OMAP3: PRM: invert the wkst_mask for the prm_clear_mod_irqsTero Kristo1-4/+4
This makes the API the same as used with OMAP2, and makes it possible to implement a generic driver API for the functionality. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-02-19ARM: make of_device_ids constUwe Kleine-König1-1/+1
of_device_ids (i.e. compatible strings and the respective data) are not supposed to change at runtime. All functions working with of_device_ids provided by <linux/of.h> work with const of_device_ids. So mark the non-const structs in arch/arm as const, too. While at it also add some __initconst annotations. Acked-by: Jason Cooper <jason@lakedameon.net> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-10-27ARM: OMAP2+: PRM: provide generic API for system resetTero Kristo1-1/+2
This patch combines the various prm_warm_reset calls under a common API prm_reset_system, and adds the SoC specific implementation under prm_ll_data. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-10-27ARM: OMAP3+: PRM: add generic API for reconfiguring I/O chainTero Kristo1-11/+2
This adds a generic API for reconfiguring the I/O chain. The implementation will call the SoC specific function registered during init time. The SoC specific reconfigure functions are also made static, as they don't need to be accessed outside the PRM driver itself. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Tested-by: Nishanth Menon <nm@ti.com> [tony@atomide.com: updated for recent omap3 prcm fixes] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-10-27ARM: OMAP3: PRM: make PRCM interrupt handler related functions staticTero Kristo1-4/+9
These are not needed outside the PRM driver, so make them static and remove the prototypes from the public header. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-10-27ARM: OMAP2+: PRM: add generic API for checking hardreset statusTero Kristo1-0/+1
PRM driver now has a generic API for checking hardreset status. SoC specific support functions are registered through the prm_ll_data. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-10-27ARM: OMAP2+: PRM: add generic API for deasserting hardware resetTero Kristo1-0/+1
PRM driver now has a generic API for deasserting hardware resets. SoC specific support functions are registered through the prm_ll_data. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-10-27ARM: OMAP2+: PRM: add generic API for asserting hardware resetTero Kristo1-0/+1
PRM driver now has a generic API for asserting hardware resets. SoC specific support functions are registered through the prm_ll_data. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-10-08Merge tag 'soc-for-linus' of ↵Linus Torvalds1-0/+18
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Arnd Bergmann: "New and updated SoC support. Among the things new for this release are: - at91: Added support for the new SAMA5D4 SoC, following the earlier SAMA5D3 - bcm: Added support for BCM63XX family of DSL SoCs - hisi: Added support for HiP04 server-class SoC - meson: Initial support for the Amlogic Meson6 (aka 8726MX) platform - shmobile: added support for new r8a7794 (R-Car E2) automotive SoC Noteworthy changes to existing SoC support are: - imx: convert i.MX1 to device tree - omap: lots of power management work - omap: base support to enable moving to standard UART driver - shmobile: lots of progress for multiplatform support, still ongoing" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (171 commits) ARM: hisi: depend on ARCH_MULTI_V7 CNS3xxx: Fix debug UART. ARM: at91: fix nommu build regression ARM: meson: add basic support for MesonX SoCs ARM: meson: debug: add debug UART for earlyprintk support irq: Export handle_fasteoi_irq ARM: mediatek: Add earlyprintk support for mt6589 ARM: hisi: Fix platmcpm compilation when ARMv6 is selected ARM: debug: fix alphanumerical order on debug uarts ARM: at91: document Atmel SMART compatibles ARM: at91: add sama5d4 support to sama5_defconfig ARM: at91: dt: add device tree file for SAMA5D4ek board ARM: at91: dt: add device tree file for SAMA5D4 SoC ARM: at91: SAMA5D4 SoC detection code and low level routines ARM: at91: introduce basic SAMA5D4 support clk: at91: add a driver for the h32mx clock ARM: pxa3xx: provide specific platform_devices for all ssp ports ARM: pxa: ssp: provide platform_device_id for PXA3xx ARM: OMAP4+: Remove static iotable mappings for SRAM ARM: OMAP4+: Move SRAM data to DT ...
2014-09-16ARM: OMAP3: Fix I/O chain clock line assertion timed out errorTony Lindgren1-4/+35
We are getting "PRM: I/O chain clock line assertion timed out" errors on early omaps for device tree based booting. This is because we are unconditionally calling reconfigure_io_chain while legacy booting has omap3_has_io_chain_ctrl() checks in place in omap_hwmod.c. For device tree based booting, we are calling reconfigure_io_chain unconditionally from pinctrl framework. So we need to add a check for omap3_has_io_chain_ctrl() to avoid the errors for trying to access a register that does not exist. For es3.0, the documentation in "4.11.2 Device Off-Mode Configuration" just mentions PM_WKEN_WKUP[8] bit. For es3.1, there's a new chapter in documentation for "4.11.2.2 I/O Wake-Up Mechanism" that describes the PM_WKEN_WKUP[16] ST_IO_CHAIN bit. So PM_WKEN_WKUP[16] bit did not get added until in es3.1 probaly to fix issues with flakey wake-up events. We are doing proper checks for ST_IO_CHAIN already in id.c and with omap3_has_io_chain_ctrl(). For more information, see also commit b02b917211d5 ("ARM: OMAP3: PM: fix I/O wakeup and I/O chain clock control detection"). Let's fix the issue by selecting the right function during init for reconfigure_io_chain depending on the omap revision. For es3.0 and earlier we need to just toggle EN_IO. By doing this, we can move the check for omap3_has_io_chain_ctrl() from omap_hwmod.c to the init code in prm_3xxx.c. And then we can unconditionally call reconfigure_io_chain. Thanks to Paul Walmsley and Nishanth Menon for help with debugging the issue. Fixes: 30a69ef785e8 ("ARM: OMAP: Move DT wake-up event handling over to use pinctrl-single-omap") Cc: Kevin Hilman <khilman@kernel.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> Reviewed-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-08ARM: OMAP3+: PRM: register interrupt information from DTNishanth Menon1-0/+18
Allow the PRM interrupt information to be picked up from device tree. OMAP3 may use legacy boot and needs to be compatible with old dtbs (without interrupt populated), for these, we use the value which is pre-populated. Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2014-07-04ARM: OMAP3: control: isolate control module init to its own functionTero Kristo1-6/+0
Control module related PM initializations are now moved within control module driver. Done in preparation to isolate the code to its own driver. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2014-07-04ARM: OMAP3: PRM: move modem reset and iva2 idle to PRM driverTero Kristo1-0/+7
Done in preparation to move PRM into its own driver. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2014-07-04ARM: OMAP3: PRM: move PRM init code from PM core to the driverTero Kristo1-0/+90
Helps to isolate the PRM driver. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2014-07-04ARM: OMAP3: PRM: add API for saving PRM scratchpad contentsTero Kristo1-0/+9
This isolates the PRM register access within the PRM driver. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2014-07-04ARM: OMAP3: PRM: add API for checking and clearing cold reset statusTero Kristo1-0/+20
This isolates the PRM register access within the PRM driver. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2014-07-04ARM: OMAP3: PRM: move modem reset to PRM driverTero Kristo1-0/+15
This is a more proper isolation of the code. Done in preparation of making PRM an individual driver. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2014-07-04ARM: OMAP3: PRM: move iva reset to PRM driverTero Kristo1-0/+45
This is a more proper isolation of the code. Done in preparation of making PRM an individual driver. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2014-07-04ARM: OMAP3: PRM: move prcm wakeup helper to prm driverTero Kristo1-0/+53
Done in preparation to make the prm an individual driver. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2014-05-16Merge tag 'for-v3.16/prcm-cleanup-a' of ↵Tony Lindgren1-12/+10
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.16/prcm Some OMAP PRCM cleanup patches. These help prepare to convert the PRCM code into drivers. Basic build, boot, and PM test results are available here: http://www.pwsan.com/omap/testlogs/prcm-cleanup-v3.16/20140515213244/ Conflicts: arch/arm/mach-omap2/cm3xxx.c arch/arm/mach-omap2/cm44xx.c Also fixed up new section mismatch warnings.
2014-05-15ARM: OMAP3/4: PRM: add support of late_init call to prm_ll_opsTero Kristo1-4/+3
SoC specific late_init call is now registered during PRM init, and will be called automatically by PRM core. This helps to get rid of some redundant initcalls and cpu_is_X checks from the PRM code. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2014-05-15ARM: OMAP3/OMAP4: PRM: add prm_features flags and add IO wakeup under itTero Kristo1-1/+7
prm_features flag will contain SoC specific feature enabler flags. Initially IO wakeup is added under this. Helps to get rid of runtime cpu_is_X checks. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2014-05-15ARM: OMAP3/4: PRM: provide io chain reconfig function through irq setupTero Kristo1-0/+1
This helps to make the PRM registration modular, and also gets rid of a cpu type check done later. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2014-05-15ARM: OMAP2+: PRM: remove unnecessary cpu_is_XXX calls from prm_init / exitTero Kristo1-9/+1
Done in preparation to make PRM its own driver, as the cpu_is_XXX calls are not available outside mach-omap2 folder. The init functions are called only from cpu specific init chain, and thus don't need to double check against cpu type. The exit calls check against the data provided during init-time registration and thus don't need cpu check either. Signed-off-by: Tero Kristo <t-kristo@ti.com> [paul@pwsan.com: updated to apply] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2013-01-11ARM: OMAP2+: Use omap initcallsTony Lindgren1-1/+1
This way the initcalls don't run on other SoCs on multiplatform kernels. Otherwise we'll get something like this when booting on vexpress: omap_hwmod: _ensure_mpu_hwmod_is_setup: MPU initiator hwmod mpu not yet registered ... WARNING: at arch/arm/mach-omap2/pm.c:82 _init_omap_device+0x74/0x94() _init_omap_device: could not find omap_hwmod for mpu ... omap-dma-engine omap-dma-engine: OMAP DMA engine driver ... Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-03Merge tag 'omap-fixes-a2-for-v3.8-rc' of ↵Tony Lindgren1-3/+25
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.8-rc2/fixes Some OMAP PRCM and sparse fixes against v3.8-rc1. A basic set of test logs are available here: http://www.pwsan.com/omap/testlogs/prcm_fixes_b_3.8-rc/20130102120724/ The 3730 Beagle XM here has an intermittent failure mounting SD root, but the suspicion right now is that this is due to a failing SD card, rather than any change introduced by these patches. This second version includes a few changes requested by Tony Lindgren.
2013-01-02ARM: OMAP2/3: PRM: fix bogus OMAP2xxx powerstate return valuesPaul Walmsley1-3/+25
On OMAP2xxx chips, the register bitfields for the PM_PWSTCTRL_*.POWERSTATE and PM_PWSTST_*.LASTSTATEENTERED are different than those used on OMAP3/4. The order is reversed. So, for example, on OMAP2xxx, 0x0 indicates 'ON'; but on OMAP3/4, 0x0 indicates 'OFF'. Similarly, on OMAP2xxx, 0x3 indicates 'OFF', but on OMAP3/4, 0x3 indicates 'ON'. To fix this, we treat the OMAP3/4 values as the powerdomain API values, and create new low-level powerdomain functions for the OMAP2xxx chips which translate between the OMAP2xxx values and the OMAP3/4 values. Without this patch, the conversion of the OMAP2xxx PM code to the functional powerstate code results in a non-booting kernel. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-12-17ARM: OMAP2+: Drop plat/cpu.h for omap2plusTony Lindgren1-2/+1
The cpu_is_omap macros are now local to arch/arm/mach-omap2 in soc.h and plat/cpu.h can finally be dropped for omap2+. Thanks everybody for help with fixing the drivers. Note that we can now also remove the unused plat/cpu.h from smartreflex.c and isp.c as they will cause compile errors with ARCH_MULTIPLATFORM enabled. Cc: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Jean Pihet <jean.pihet@newoldbits.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-11-21ARM: OMAP2+: PRM: initialize some PRM functions earlyPaul Walmsley1-7/+10
Some PRM functions will need to be called by the hwmod code early in kernel init. To handle this, split the PRM initialization code into early and late phases. The early init is handled via mach-omap2/io.c, while the late init is handled by subsys_initcall(). Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-11-08ARM: OMAP2+: PRCM: remove obsolete prcm.[ch]Paul Walmsley1-1/+0
arch/arm/mach-omap2/prcm.c and arch/arm/plat-omap/include/plat/prcm.h are now completely unused and can be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Vaibhav Hiremath <hvaibhav@ti.com>
2012-11-08ARM: OMAP2/3: PRM: add SoC reset functions (using the CORE DPLL method)Paul Walmsley1-0/+15
Add SoC reset functions into the PRM code. These functions are based on code from mach-omap2/prcm.c. They reset the SoC using the CORE DPLL reset method (as opposed to one of the other two or three chip reset methods). Adding them here will facilitate their removal from arch/arm/mach-omap2/prcm.c. (prcm.c is deprecated.) Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Vaibhav Hiremath <hvaibhav@ti.com>
2012-10-21ARM: OMAP2+: PRM: create PRM reset source API for the watchdog timer driverPaul Walmsley1-0/+65
The OMAP watchdog timer driver needs to determine what caused the SoC to reset for its GETBOOTSTATUS ioctl. So, define a set of standard reset sources across OMAP SoCs. For OMAP2xxx, 3xxx, and 4xxx SoCs, define mappings from the SoC-specific reset source register bits to the standardized reset source IDs. Create SoC-specific PRM functions that read the appropriate per-SoC register and use the mapping to return the standardized reset bits. Register the SoC-specific PRM functions with the common PRM code via prm_register(). Create a function in the common PRM code, prm_read_reset_sources(), that calls the SoC-specific function, registered during boot. This patch does not yet handle some SoCs, such as AM33xx. Those SoCs were not handled by the code this will replace. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-10-21ARM: OMAP2+: powerdomain/PRM: move the low-level powerdomain functions into PRMPaul Walmsley1-1/+106
Move the low-level SoC-specific powerdomain control functions into prm*.c. For example, OMAP2xxx low-level powerdomain functions go into prm2xxx.c. Then remove the unnecessary powerdomain*xxx*.c files. The objective is to centralize low-level PRM register accesses into the prm*.[ch] files, and then to export an OMAP SoC-independent API to higher-level OMAP power management code. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21ARM: OMAP2+: PRM: split PRM functions into OMAP2, OMAP3-specific filesPaul Walmsley1-0/+233
Move OMAP3xxx-specific PRM functions & macros into prm3xxx.[ch] and OMAP2xxx-specific macros into prm2xxx.h. (prm2xxx.c will be created by a subsequent patch when it's needed.) Move basic PRM register access functions into static inline functions in prm2xxx_3xxx.h, leaving only OMAP2/3 hardreset functions in prm2xxx_3xxx.c. Also clarify the initcall function naming to reinforce that this code is specifically for the PRM IP block. This is in preparation for the upcoming powerdomain series and the upcoming move of this code to drivers/. Signed-off-by: Paul Walmsley <paul@pwsan.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-03 13:08:34 +0000