summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/cpuidle34xx.c
AgeCommit message (Collapse)AuthorFilesLines
2020-03-09ARM: OMAP2+: Handle errors for cpu_pmTony Lindgren1-2/+7
We need to check for errors when calling cpu_pm_enter() and cpu_cluster_pm_enter(). And we need to bail out on errors as otherwise we can enter a deeper idle state when not desired. I'm not aware of the lack of error handling causing issues yet, but we need this at least for blocking deeper idle states when a GPIO instance has pending interrupts. Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Ladislav Michl <ladis@linux-mips.org> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20200304225433.37336-2-tony@atomide.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-19ARM: OMAP3: Add cpuidle parameters table for omap3430Pali Rohár1-1/+68
Based on CPU type choose generic omap3 or omap3430 specific cpuidle parameters. Parameters for omap3430 were measured on Nokia N900 device and added by commit 5a1b1d3a9efa ("OMAP3: RX-51: Pass cpu idle parameters") which were later removed by commit 231900afba52 ("ARM: OMAP3: cpuidle - remove rx51 cpuidle parameters table") due to huge code complexity. This patch brings cpuidle parameters for omap3430 devices again, but uses simple condition based on CPU type. Fixes: 231900afba52 ("ARM: OMAP3: cpuidle - remove rx51 cpuidle parameters table") Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-12cpuidle: Invert CPUIDLE_FLAG_TIME_VALID logicDaniel Lezcano1-7/+0
The only place where the time is invalid is when the ACPI_CSTATE_FFH entry method is not set. Otherwise for all the drivers, the time can be correctly measured. Instead of duplicating the CPUIDLE_FLAG_TIME_VALID flag in all the drivers for all the states, just invert the logic by replacing it by the flag CPUIDLE_FLAG_TIME_INVALID, hence we can set this flag only for the acpi idle driver, remove the former flag from all the drivers and invert the logic with this flag in the different governor. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-05-02Merge tag 'cleanup-for-linus' of ↵Linus Torvalds1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanup from Olof Johansson: "Here is a collection of cleanup patches. Among the pieces that stand out are: - The deletion of h720x platforms - Split of at91 non-dt platforms to their own Kconfig file to keep them separate - General cleanups and refactoring of i.MX and MXS platforms - Some restructuring of clock tables for OMAP - Convertion of PMC driver for Tegra to dt-only - Some renames of sunxi -> sun4i (Allwinner A10) - ... plus a bunch of other stuff that I haven't mentioned" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (119 commits) ARM: i.MX: remove unused ARCH_* configs ARM i.MX53: remove platform ahci support ARM: sunxi: Rework the restart code irqchip: sunxi: Rename sunxi to sun4i irqchip: sunxi: Make use of the IRQCHIP_DECLARE macro clocksource: sunxi: Rename sunxi to sun4i clocksource: sunxi: make use of CLKSRC_OF clocksource: sunxi: Cleanup the timer code ARM: at91: remove trailing semicolon from macros ARM: at91/setup: fix trivial typos ARM: EXYNOS: remove "config EXYNOS_DEV_DRM" ARM: EXYNOS: change the name of USB ohci header ARM: SAMSUNG: Remove unnecessary code for dma ARM: S3C24XX: Remove unused GPIO drive strength register definitions ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2412 ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2410 ARM: S3C24XX: Removed unneeded dependency on ARCH_S3C24XX for boards ARM: SAMSUNG: Fix typo "CONFIG_SAMSUNG_DEV_RTC" ARM: S5P64X0: Fix typo "CONFIG_S5P64X0_SETUP_SDHCI" ...
2013-04-23ARM: OMAP3: cpuidle: use init/exit common routineDaniel Lezcano1-20/+2
Remove the duplicated code and use the cpuidle common code for initialization. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-23cpuidle: remove en_core_tk_irqen flagDaniel Lezcano1-1/+0
The en_core_tk_irqen flag is set in all the cpuidle driver which means it is not necessary to specify this flag. Remove the flag and the code related to it. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Kevin Hilman <khilman@linaro.org> # for mach-omap2/* Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-22ARM: OMAP3: remove cpuidle_wrap_enterDaniel Lezcano1-21/+9
In a previous commit the en_core_tk_irqen flag has been added but we missed the cpuidle_wrap_enter which was doing the job to measure the time for the 'omap3_enter_idle' function. Actually, I don't see any reason to use this wrapper in the code. In the better case, the time computation is not correctly done because of the different operations done in omap3_enter_idle_bm which were not taken into account before the en_core_tk_irqen flag was set. As the time is reflected for the state overridden by the omap3_enter_idle_bm, using the wrapper is pointless now, so removing it. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Kevin Hilman <khilman@linaro.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-09ARM: OMAP: CPUidle: Unregister drivere on device registration failureSantosh Shilimkar1-1/+5
If the CPUidle device registration fails for some reason, we should unregister the driver on error path. Fix the code accordingly. Also when at it, check of the driver registration failure too. Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-04-09ARM: omap3: cpuidle: enable time keepingDaniel Lezcano1-2/+3
The TIME_VALID flag is specified for the different states but the time residency computation is not done, no tk flag, no time computation in the idle function. Set the en_core_tk_irqen flag to activate it. Cc: stable@vger.kernel.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-03-28ARM: OMAP2+: PM: Remove bogus fiq_[enable/disable] tupleSantosh Shilimkar1-3/+0
On OMAP platform, FIQ is reserved for secure environment only. If at all the FIQ needs to be disabled, it involves going through security API call. Hence the local_fiq_[enable/disable]() in the OMAP code is bogus. On GP devices too, the fiq is disabled for non-secure software. So just get rid of it. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2013-01-29ARM: OMAP3xxx: CPUIdle: optimize __omap3_enter_idle()Paul Walmsley1-13/+22
Avoid programming the MPU and CORE powerdomain next-power-state registers if those powerdomains will never enter low-power states (e.g., the state that people refer to as "C1"). To avoid making assumptions about CPUIdle states based on their order in the list, use a flag to mark CPUIdle states that don't enter powerdomain low-power states. Avoid a previous-power-state register read on the MPU powerdomain unless we know that the MPU was supposed to go OFF during the last state transition. Previous-power-state register reads can be very expensive, so it's worth avoiding these when possible. Since the CORE_L3 clockdomain can't go inactive unless the MPU is active, there's little point blocking autoidle on the CORE_L3 clockdomain in "C1" state, since we've programmed the MPU clockdomain to stay active. Remove the unnecessary code. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2013-01-26ARM: OMAP3xxx: CPUIdle: simplify the PER next-state codePaul Walmsley1-22/+22
The OMAP3xxx CPUIdle driver contains some code to place a lower bound on the PER powerdomain's power state. Convert this code to a data-driven implementation to remove branches and to improve readability. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2012-12-15ARM: OMAP3/4: cpuidle: fix sparse and checkpatch warningsPaul Walmsley1-5/+9
Fix the following sparse warnings in the OMAP3/4 CPUIdle code: arch/arm/mach-omap2/cpuidle34xx.c:272:1: warning: symbol 'omap3_idle_dev' was not declared. Should it be static? arch/arm/mach-omap2/cpuidle34xx.c:274:23: warning: symbol 'omap3_idle_driver' was not declared. Should it be static? arch/arm/mach-omap2/cpuidle44xx.c:164:1: warning: symbol 'omap4_idle_dev' was not declared. Should it be static? arch/arm/mach-omap2/cpuidle44xx.c:166:23: warning: symbol 'omap4_idle_driver' was not declared. Should it be static? Also fix the following checkpatch warnings: WARNING: please, no space before tabs #44: FILE: arch/arm/mach-omap2/cpuidle34xx.c:105: +^I.name = ^I"omap3_idle",$ WARNING: please, no space before tabs #45: FILE: arch/arm/mach-omap2/cpuidle34xx.c:106: +^I.owner = ^ITHIS_MODULE,$ ERROR: code indent should use tabs where possible #211: FILE: arch/arm/mach-omap2/cpuidle44xx.c:74: + /* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */$ Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-11-08ARM: OMAP2+: PRCM: remove obsolete prcm.[ch]Paul Walmsley1-1/+0
arch/arm/mach-omap2/prcm.c and arch/arm/plat-omap/include/plat/prcm.h are now completely unused and can be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Vaibhav Hiremath <hvaibhav@ti.com>
2012-09-12ARM: OMAP2+: Prepare for irqs.h removalTony Lindgren1-1/+0
As the interrupts should only be defined in the platform_data, and eventually coming from device tree, there's no need to define them in header files. Let's remove the hardcoded references to irqs.h and fix up the includes so we don't rely on headers included in irqs.h. Note that we're defining OMAP_INTC_START as 0 to the interrupts. This will be needed when we enable SPARSE_IRQ. For some drivers we need to add #include <plat/cpu.h> for now until these drivers are fixed to remove cpu_is_omapxxxx() usage. While at it, sort som of the includes the standard way, and add the trailing commas where they are missing in the related data structures. Note that for drivers/staging/tidspbridge we just define things locally. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-07-23Merge tag 'pm' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-44/+27
Pull arm-soc power management changes from Arnd Bergmann: "These are various power management related changes, mainly concerning cpuidle on i.MX and OMAP, as well as a the move of the omap smartreflex driver to live in the power subsystem." Fix up conflicts in arch/arm/mach-{imx/mach-imx6q.c,omap2/prm2xxx_3xxx.h} * tag 'pm' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits) ARM: OMAP2+: PM: fix IRQ_NOAUTOEN removal by mis-merge ARM: OMAP2+: do not allow SmartReflex to be built as a module ARM: OMAP2: Use hwmod to initialize mmc for 2420 ARM: OMAP3: PM: cpuidle: optimize the clkdm idle latency in C1 state ARM: OMAP3: PM: cpuidle: optimize the PER latency in C1 state ARM: OMAP3: PM: cpuidle: default to C1 in next_valid_state ARM: OMAP3: PM: cleanup cam_pwrdm leftovers ARM: OMAP3: PM: call pre/post transition per powerdomain ARM: OMAP2+: powerdomain: allow pre/post transtion to be per pwrdm ARM: OMAP3: PM: Remove IO Daisychain control from cpuidle ARM: OMAP3PLUS: hwmod: reconfigure IO Daisychain during hwmod mux ARM: OMAP3+: PRM: Enable IO wake up ARM: OMAP4: PRM: Add IO Daisychain support ARM: OMAP3: PM: Move IO Daisychain function to omap3 prm file ARM: OMAP3: PM: correct enable/disable of daisy io chain ARM: OMAP2+: PRM: fix compile for OMAP4-only build W1: OMAP HDQ1W: use runtime PM ARM: OMAP2+: HDQ1W: use omap_device W1: OMAP HDQ1W: use 32-bit register accesses W1: OMAP HDQ1W: allow driver to be built on all OMAP2+ ...
2012-06-25ARM: OMAP3: PM: cpuidle: optimize the clkdm idle latency in C1 stateJean Pihet1-18/+4
For a power domain to idle all the clock domains in it must idle. This patch implements an optimization of the cpuidle code by denying and later allowing only the first registered clock domain of a power domain, and so optimizes the latency of the low power code. The functions _cpuidle_allow_idle and _cpuidle_deny_idle are not used anymore and so are removed. Signed-off-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-06-25ARM: OMAP3: PM: cpuidle: optimize the PER latency in C1 stateJean Pihet1-19/+22
One of the main contributors of the low power code latency is the PER power domain. To optimize the high-performance and low-latency C1 state, prevent any PER state which is lower than the CORE state in C1. Reported and suggested by Kevin Hilman. Reported-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-06-25ARM: OMAP3: PM: cpuidle: default to C1 in next_valid_stateJean Pihet1-7/+1
If the next state is no found in the next_valid_state function, fallback to the default value of C1 (which is state 0). This prevents the use of a bogus state -1 in the rest of the cpuidle code. Signed-off-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-06-19ARM: OMAP3/4: consolidate cpuidle MakefileDaniel Lezcano1-8/+0
The current Makefile compiles the cpuidle34xx.c and cpuidle44xx.c files even if the cpuidle option is not set in the kernel. This patch fixes this by creating a section in the Makefile where these files are compiled only if the CONFIG_CPU_IDLE option is set. This modification breaks an implicit dependency between CPU_IDLE and PM as they belong to the same block in the Makefile. This is fixed in the Kconfig by selecting explicitely PM is CPU_IDLE is set. The linux coding style recommend to use no-op functions in the headers when the subsystem is disabled instead of adding big section in C files. This patch fix this also. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-05-04ARM: OMAP3: cpuidle - check the powerdomain lookupDaniel Lezcano1-0/+3
At init time, check the powerdomains lookup is successful otherwise exit the cpuidle driver init function with -ENODEV like what is done for the omap3 cpuidle driver. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Jean Pihet <j-pihet@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-05-03ARM: OMAP3: cpuidle - set global variables staticDaniel Lezcano1-1/+1
struct powerdomain varialbes are all file local, make them static. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> [khilman@ti.com: update changelog, drop error check in fast path] Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-05-03ARM: OMAP3: set omap3_idle_data as staticDaniel Lezcano1-1/+1
Reduce the scope of the omap3_idle_data to the file as it is only used in cpuidle34xx.c. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-05-03ARM: OMAP3: cpuidle - simplify next_valid_stateDaniel Lezcano1-34/+19
Simplify the indentation by removing the useless 'else' statement. Remove the first loop for the 'idx' search as we have it already with the 'index' passed as parameter. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-05-03ARM: OMAP3: cpuidle - use omap3_idle_data directlyDaniel Lezcano1-57/+6
We are storing the 'omap3_idle_data' in the private data field of the cpuidle device. As we are using this variable only in this file, that does not really make sense. Let's use the global variable directly. As the table is initialized statically, let's remove the initialization at startup too. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-05-03ARM: OMAP3: define statically the omap3_idle_dataDaniel Lezcano1-5/+32
Initialize the omap3_idle_data array at compile time, that will allow to remove the initialization at boot time. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-05-03ARM: OMAP3: cpuidle - remove cpuidle_params_tableDaniel Lezcano1-25/+3
We do not longer need the ''cpuidle_params_table' array as we defined the states in the driver and we checked they are all valid. We also remove the structure definition as it is no longer used. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-05-03ARM: OMAP3: cpuidle - remove the 'valid' fieldDaniel Lezcano1-9/+2
With the previous changes all the states are valid, except the last state which is now handled at runtime by next_valid_state() based on the errata flags. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> [khilman@ti.com: minor changelog rework] Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-05-03ARM: OMAP3: cpuidle - remove errata check in the init functionDaniel Lezcano1-10/+0
The errata check is done in the next_valid_state function, no need to check that in the omap3_idle_init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-05-03ARM: OMAP3: define cpuidle staticallyDaniel Lezcano1-26/+60
Use the new cpuidle API and define in the driver the states. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-05-03ARM: OMAP3: cpuidle - remove rx51 cpuidle parameters tableDaniel Lezcano1-17/+0
As suggested, this table is an optimized version for rx51 and we remove it in order to consolidate the cpuidle code between omap3 and omap4, we remove this specific data definition which is used to override the default omap3 latencies but at the cost of extra code and complexity. In order to not lose the values which probably took time to be measured, the table is converted into a comment with an array description. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-03-21ARM: omap: Consolidate OMAP3 time keeping and irq enableRobert Lee1-25/+17
Use core cpuidle timekeeping and irqen wrapper and remove that handling from this code. Signed-off-by: Robert Lee <rob.lee@linaro.org> Reviewed-by: Kevin Hilman <khilman@ti.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Tested-by: Jean Pihet <j-pihet@ti.com> Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-12-16Merge branch 'for_3.3/uart/runtime-pm' of ↵Tony Lindgren1-6/+0
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into uart Conflicts: arch/arm/mach-omap2/pm34xx.c
2011-12-14ARM: OMAP2+: UART: Remove omap_uart_can_sleep and add pm_qosGovindraj.R1-6/+0
Omap_uart_can_sleep function blocks system wide low power state until uart is active remove this func and add qos requests to prevent MPU from transitioning. Keep qos request to default value which will allow MPU to transition and while uart baud rate is available calculate the latency value from the baudrate and use the same to hold constraint while uart clocks are enabled, and if uart is auto-idled the constraint is updated with default constraint value allowing MPU to transition. Qos requests are blocking notifier calls so put these requests to work queue, also the driver uses irq_safe version of runtime API's and callbacks can be called in interrupt disabled context. So to avoid warn on slow path warning while using qos update API's from runtime callbacks use the qos_work_queue. During bootup the runtime_resume call backs might not be called and runtime callback gets called only after uart is idled by setting the autosuspend timeout. So qos_request from runtime resume callback might not activated during boot if uart baudrate is calculated during bootup for console uart, so schedule the qos_work queue once we calc_latency while configuring the uart port. Flush and complete any pending qos jobs in work queue while suspending. Signed-off-by: Govindraj.R <govindraj.raja@ti.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> (for drivers/tty changes) Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-12-08ARM: OMAP3: CPUidle: Make use of CPU PM notifiersSantosh Shilimkar1-0/+15
Save VFP CPU context using CPU PM notifier chain. VFP context is lost when CPU hits OFF state. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Tested-by: Vishwanath BS <vishwanath.bs@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-12-05Merge branch 'for-rmk' of ↵Russell King1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into devel-stable Conflicts: arch/arm/common/gic.c arch/arm/plat-omap/include/plat/common.h
2011-12-05ARM: 7189/1: OMAP3: Fix build break in cpuidle34xx.c because of irq functionSantosh Shilimkar1-0/+1
Fix the below build break by including common.h arch/arm/mach-omap2/cpuidle34xx.c: In function 'omap3_enter_idle': arch/arm/mach-omap2/cpuidle34xx.c:117: error: implicit declaration of function 'omap_irq_pending' make[1]: *** [arch/arm/mach-omap2/cpuidle34xx.o] Error 1 make: *** [arch/arm/mach-omap2] Error 2 Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23Merge branch 'fixes-v3.2-rc2' into fixesTony Lindgren1-48/+85
2011-11-07ARM: OMAP3: CPUidle: include <linux/export.h>Kevin Hilman1-0/+1
The CPUidle use THIS_MODULE, so needs <linux/export.h> Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-06cpuidle: Single/Global registration of idle statesDeepthi Dharwar1-24/+49
This patch makes the cpuidle_states structure global (single copy) instead of per-cpu. The statistics needed on per-cpu basis by the governor are kept per-cpu. This simplifies the cpuidle subsystem as state registration is done by single cpu only. Having single copy of cpuidle_states saves memory. Rare case of asymmetric C-states can be handled within the cpuidle driver and architectures such as POWER do not have asymmetric C-states. Having single/global registration of all the idle states, dynamic C-state transitions on x86 are handled by the boot cpu. Here, the boot cpu would disable all the devices, re-populate the states and later enable all the devices, irrespective of the cpu that would receive the notification first. Reference: https://lkml.org/lkml/2011/4/25/83 Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: Trinabh Gupta <g.trinabh@gmail.com> Tested-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-06cpuidle: Split cpuidle_state structure and move per-cpu statistics fieldsDeepthi Dharwar1-6/+7
This is the first step towards global registration of cpuidle states. The statistics used primarily by the governor are per-cpu and have to be split from rest of the fields inside cpuidle_state, which would be made global i.e. single copy. The driver_data field is also per-cpu and moved. Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: Trinabh Gupta <g.trinabh@gmail.com> Tested-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-06cpuidle: Move dev->last_residency update to driver enter routine; remove ↵Deepthi Dharwar1-28/+39
dev->last_state Cpuidle governor only suggests the state to enter using the governor->select() interface, but allows the low level driver to override the recommended state. The actual entered state may be different because of software or hardware demotion. Software demotion is done by the back-end cpuidle driver and can be accounted correctly. Current cpuidle code uses last_state field to capture the actual state entered and based on that updates the statistics for the state entered. Ideally the driver enter routine should update the counters, and it should return the state actually entered rather than the time spent there. The generic cpuidle code should simply handle where the counters live in the sysfs namespace, not updating the counters. Reference: https://lkml.org/lkml/2011/3/25/52 Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: Trinabh Gupta <g.trinabh@gmail.com> Tested-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-05-20OMAP3: cpuidle: change the power domains modes determination logicJean Pihet1-34/+24
The achievable power modes of the power domains in cpuidle depends on the system wide 'enable_off_mode' knob in debugfs. Upon changing enable_off_mode, do not change the C-states 'valid' field but instead dynamically restrict the power modes when entering idle. The C-states 'valid' field is just used to enable/disable some C-states at init and shall not be changed later on. Signed-off-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-05-20OMAP3: cpuidle: code rework for improved readabilityJean Pihet1-33/+19
- fix single and multi-lines comments format - removed the omap3_idle_bm_check function and replaced the test in omap3_enter_idle_bm by the equivalent code - re-organize omap3_enter_idle_bm code path, assign local variables only when needed - reword some comments Signed-off-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-05-20OMAP3: cpuidle: re-organize the C-states dataJean Pihet1-204/+101
The current implementation defines an internal structure and a C-states array. Using those structures is redundant to the structs used by the cpuidle framework. This patch provides a clean-up of the internal struct, removes the internal C-states array, stores the data using the existing cpuidle per C-state struct and registers the mach specific data to cpuidle C-state driver_data (accessed using cpuidle_[gs]et_statedata). Also removes unused macros, fields and code and compacts the repeating code using an inline helper function. The result is more compact and more readable code as well as reduced data RAM usage. Also retain C1 as the only always valid C-state and system safe state. Signed-off-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-05-20OMAP3: clean-up mach specific cpuidle data structuresJean Pihet1-60/+43
- sleep_latency and wake_latency are not used, replace them by exit_latency which is used by cpuidle. exit_latency simply is the sum of sleep_latency and wake_latency, - replace threshold by target_residency, - changed the OMAP3 specific cpuidle code accordingly, - changed the OMAP3 board code accordingly. Signed-off-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-31Fix common misspellingsLucas De Marchi1-2/+2
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-11Merge branch 'integration-2.6.39-for-tony' of ↵Tony Lindgren1-2/+2
git://git.pwsan.com/linux-integration into omap-for-linus Conflicts: arch/arm/mach-omap2/pm34xx.c
2011-03-09omap3: cpuidle: Add description field to each C-state.Santosh Shilimkar1-0/+9
Add a description field to each idle C-state. This helps to give better data with PowerTop and one don't have to refer to the code to link what Cx means from system point of view while analysing PowerTop data. No functional change. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>