summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2011-08-05OMAP2+: Kconfig: don't select PM in OMAP2PLUS_TYPICALKevin Hilman1-1/+0
CONFIG_PM is no longer a user-selectable Kconfig option. Rather it is automatically enabled if either CONFIG_SUSPEND or CONFIG_RUNTIME_PM is enabled, so having a 'select PM' here is redunant when 'select CONFIG_PM_RUNTIME' is present. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-07-05arm: omap3: cm-t35: add support for cm-t3730Igor Grinberg1-1/+5
cm-t3730 is basically the same board as cm-t35, but has AM/DM3730 SoC assembled and therefore some changes are required. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Mike Rapoport <mike@compulab.co.il> [tony@atomide.com: updated for init_irq cleanup as noted by khilman@ti.com] Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-05-17omap: drop board-igep0030.cMike Rapoport1-0/+1
since it is merged into board-igep0020.c Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-03-23Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-0/+1
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (35 commits) ARM: Update (and cut down) mach-types ARM: 6771/1: vexpress: add support for multiple core tiles ARM: 6797/1: hw_breakpoint: Fix newlines in WARNings ARM: 6751/1: vexpress: select applicable errata workarounds in Kconfig ARM: 6753/1: omap4: Enable ARM local timers with OMAP4430 es1.0 exception ARM: 6759/1: smp: Select local timers vs broadcast timer support runtime ARM: pgtable: add pud-level code ARM: 6673/1: LPAE: use phys_addr_t instead of unsigned long for start of membanks ARM: Use long long format when printing meminfo physical addresses ARM: integrator: add Integrator/CP sched_clock support ARM: realview/vexpress: consolidate SMP bringup code ARM: realview/vexpress: consolidate localtimer support ARM: integrator/versatile: consolidate FPGA IRQ handling code ARM: rationalize versatile family Kconfig/Makefile ARM: realview: remove old AMBA device DMA definitions ARM: versatile: remove old AMBA device DMA definitions ARM: vexpress: use new init_early for clock tree and sched_clock init ARM: realview: use new init_early for clock tree and sched_clock init ARM: versatile: use new init_early for clock tree and sched_clock init ARM: integrator: use new init_early for clock tree init ...
2011-03-20Merge branches 'fixes', 'pgt-next' and 'versatile' into develRussell King1-0/+1
2011-03-17Merge branch 'omap-for-linus' of ↵Linus Torvalds1-8/+20
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits) omap: zoom: host should not pull up wl1271's irq line arm: plat-omap: iommu: fix request_mem_region() error path OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430 omap4: mux: Remove duplicate mux modes omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected omap4: board-omap4panda: Initialise the serial pads omap3: board-3430sdp: Initialise the serial pads omap4: board-4430sdp: Initialise the serial pads omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init omap2+: mux: Remove the use of IDLE flag omap2+: Add separate list for dynamic pads to mux perf: add OMAP support for the new power events OMAP4: Add IVA OPP enteries. OMAP4: Update Voltage Rail Values for MPU, IVA and CORE OMAP4: Enable 800 MHz and 1 GHz MPU-OPP OMAP3+: OPP: Replace voltage values with Macros OMAP3: wdtimer: Fix CORE idle transition Watchdog: omap_wdt: add fine grain runtime-pm ... Fix up various conflicts in - arch/arm/mach-omap2/board-omap3evm.c - arch/arm/mach-omap2/clock3xxx_data.c - arch/arm/mach-omap2/usb-musb.c - arch/arm/plat-omap/include/plat/usb.h - drivers/usb/musb/musb_core.h
2011-03-09ARM: 6755/1: omap4: l2x0: Populate set_debug() function and enable Errata 727915Santosh Shilimkar1-0/+1
Populate the l2x0 set_debug function pointer with OMAP secure call and enable the PL310 Errata 727915 This patch has dependency on the earlier patch ARM: l2x0: Errata fix for flush by Way operation can cause data corruption Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-23ARM: 6753/1: omap4: Enable ARM local timers with OMAP4430 es1.0 exceptionSantosh Shilimkar1-0/+1
On OMAP4430 ES1.0 the local timers are gated by security. Enable the CONFIG_LOCAL_TIMERS for omap2plus build and handle the OMAP4430 es1.0 exception case. This patch has dependency on the first patch in this series. ARM: smp: Select local timers vs dummy timer support runtime Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-22omap: select REGULATOR_FIXED_VOLTAGE by default for panda and sdp4430Panduranga Mallireddy1-0/+2
Power to the wl12xx wlan device is controlled by a fixed regulator. Boards that have the wl12xx should select REGULATOR_FIXED_VOLTAGE. Signed-off-by: Panduranga Mallireddy <panduranga_mallireddy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-16Merge branches 'devel-cleanup', 'devel-board', 'devel-early-init' and ↵Tony Lindgren1-8/+18
'devel-ti816x' into omap-for-linus
2011-02-16TI816X: Create board support and enable build for TI816X EVMHemant Pedanekar1-0/+5
This patch adds minimal support and build configuration for TI816X EVM. Signed-off-by: Hemant Pedanekar <hemantp@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-16TI816X: Update common omap platform filesHemant Pedanekar1-0/+5
This patch updates the common platform files with TI816X support. The approach taken in this patch is to add TI816X as part of OMAP3 variant where the cpu class is considered as OMAP34XX and the type is TI816X. This means, both cpu_is_omap34xx() and cpu_is_ti816x() checks return success on TI816X. A kernel config option CONFIG_SOC_OMAPTI816X is added under OMAP3 to include support for TI816X build. Signed-off-by: Hemant Pedanekar <hemantp@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-01-27omap: Start using CONFIG_SOC_OMAPTony Lindgren1-8/+8
We want to have just CONFIG_ARCH_OMAP2, 3 and 4. The rest are nowadays just subcategories of these. Search and replace the following: ARCH_OMAP2420 SOC_OMAP2420 ARCH_OMAP2430 SOC_OMAP2430 ARCH_OMAP3430 SOC_OMAP3430 No functional changes. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Thomas Weber <weber@corscience.de> Acked-by: Sourav Poddar <sourav.poddar@ti.com>
2011-01-07Merge branch 'usb-next' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (144 commits) USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004) USB: serial: ftdi_sio: add support for TIOCSERGETLSR USB: ehci-mxc: Setup portsc register prior to accessing OTG viewport USB: atmel_usba_udc: fix freeing irq in usba_udc_remove() usb: ehci-omap: fix tll channel enable mask usb: ohci-omap3: fix trivial typo USB: gadget: ci13xxx: don't assume that PAGE_SIZE is 4096 USB: gadget: ci13xxx: fix complete() callback for no_interrupt rq's USB: gadget: update ci13xxx to work with g_ether USB: gadgets: ci13xxx: fix probing of compiled-in gadget drivers Revert "USB: musb: pm: don't rely fully on clock support" Revert "USB: musb: blackfin: pm: make it work" USB: uas: Use GFP_NOIO instead of GFP_KERNEL in I/O submission path USB: uas: Ensure we only bind to a UAS interface USB: uas: Rename sense pipe and sense urb to status pipe and status urb USB: uas: Use kzalloc instead of kmalloc USB: uas: Fix up the Sense IU usb: musb: core: kill unneeded #include's DA8xx: assign name to MUSB IRQ resource usb: gadget: g_ncm added ... Manually fix up trivial conflicts in USB Kconfig changes in: arch/arm/mach-omap2/Kconfig arch/sh/Kconfig drivers/usb/Kconfig drivers/usb/host/ehci-hcd.c and annoying chip clock data conflicts in: arch/arm/mach-omap2/clock3xxx_data.c arch/arm/mach-omap2/clock44xx_data.c
2010-12-21omap4: opp: add OPP table dataNishanth Menon1-0/+2
This patch adds OPP tables for OMAP4. New file has been added to keep the OMAP4 opp tables and the registration of these tables with the generic opp framework by OMAP SoC OPP interface. Based on: http://dev.omapzoom.org/?p=santosh/kernel-omap4-base.git;a=blob;f=arch/arm/mach-omap2/opp44xx_data.c;h=252e3d0cb6050a64f390b9311c1c4977d74f762a;hb=refs/heads/omap4_next Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21omap: opp: add OMAP3 OPP table data and common initNishanth Menon1-0/+2
Add OPP data for OMAP34xx and OMAP36xx and initialization functions to populate OPP tables based on current SoC. introduce an OMAP generic opp initialization routine which OMAP3 and OMAP4+ SoCs can use to register their OPP definitions. Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-20arm: mach-omap2: Kconfig: fix incorrect optionAaro Koskinen1-1/+1
There is no MFD config option, MFD_SUPPORT should be selected instead. This will prevent build errors when trying out different configurations. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-17omap: boards w/ wl12xx should select REGULATOR_FIXED_VOLTAGEOhad Ben-Cohen1-0/+3
Power to the wl12xx wlan device is controlled by a fixed regulator. Boards that have the wl12xx should select REGULATOR_FIXED_VOLTAGE so users will not be baffled. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-17Merge branch 'devel-board' into omap-for-linusTony Lindgren1-0/+6
2010-12-17arm: omap: add minimal support for RM-680Aaro Koskinen1-0/+6
Add minimal support for Nokia RM-680 board. Tested with omap2plus_defconfig. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> [tony@atomide.com: updated to remove omap_gpio_init Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-07omap: Don't select mux by default for each boardTony Lindgren1-4/+0
This should be only selected in CONFIG_ARCH_OMAP2PLUS_TYPICAL to make it easy to disable. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-11-30Merge branch 'ctrl-wip/mux-omap4-v4' of git://gitorious.org/omap-pm/linux ↵Tony Lindgren1-0/+10
into omap-for-linus
2010-11-30omap: AM3517/05: Add craneboard supportSrinath1-0/+5
Craneboard is a hardware development platform based on the Sitara AM3517 ARM Cortex - A8 microprocessor device. This is a low cost reference design. This patch adds basic board file. Detailed support will follow in subsequent patches. [1] http://www.ti.com/arm [2] http://www.mistralsolutions.com/products/craneboard.php Signed-off-by: Srinath <srinath@mistralsolutions.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-01arm: omap4: select USB_ARCH_HAS_EHCIAnand Gadiyar1-0/+1
The OMAP4 has an on-chip EHCI controller. Select USB_ARCH_HAS_EHCI to allow the EHCI driver to be built on OMAP4. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2010-11-17OMAP4: pandaboard: Select CBL & CBS package and initialize muxsricharan1-0/+2
The mux framework allows the change of pad configuration by drivers when needed. Prior to this the mux framework has to be initialised with all the mux parameters specific to the board. The mux init is already present in the board file for SDP. Adding the mux init for panda boards. Signed-off-by: sricharan <r.sricharan@ti.com> Acked-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-11-17OMAP4: sdp4430: Select CBS package for ES2Benoit Cousson1-0/+1
Select the CBS package if SDP4430 is enabled during config. Use the proper package (CBL or CBS) based on chip revision. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Anand Gadiyar <gadiyar@ti.com>
2010-11-17OMAP4: mux: Add CBS package data for OMAP4430 ES2Benoit Cousson1-0/+3
Please note that the full muxmodes are re-defined for ES2 instead of using the subset. There are 81 differences among 204 pins. The subset fixup will have to iterate over the whole list for each subset entry, which can lead to an important number of iteration. On the other hand, it will take much more memory at boot time. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Anand Gadiyar <gadiyar@ti.com>
2010-11-17OMAP4: sdp4430: Select CBL package for ES1 and initialize muxBenoit Cousson1-0/+1
Select the CBL package if SDP4430 is enabled during config. Initialize the mux framework during the board init. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2010-11-17OMAP4: mux: Add CBL package data for OMAP4430 ES1Benoit Cousson1-0/+3
Add data for OMAP4430 generated from HW pinout & register database. The data set is split in two partitions for both core and wkup. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2010-10-08OMAP2+: Kconfig: disallow builds for boards that don't use the ↵Paul Walmsley1-3/+3
currently-selected SoC Currently, if, for example, CONFIG_ARCH_OMAP2420 is not selected, OMAP2420 board files can still be included in the build. This results in link errors: arch/arm/mach-omap2/built-in.o: In function `omap_generic_map_io': .../arch/arm/mach-omap2/board-generic.c:51: undefined reference to `omap2_set_globals_242x' arch/arm/mach-omap2/built-in.o: In function `omap_h4_init': .../arch/arm/mach-omap2/board-h4.c:330: undefined reference to `omap2420_mux_init' arch/arm/mach-omap2/built-in.o: In function `omap_h4_map_io': .../arch/arm/mach-omap2/board-h4.c:373: undefined reference to `omap2_set_globals_242x' arch/arm/mach-omap2/built-in.o: In function `omap_apollon_init': .../arch/arm/mach-omap2/board-apollon.c:325: undefined reference to `omap2420_mux_init' arch/arm/mach-omap2/built-in.o: In function `omap_apollon_map_io': .../arch/arm/mach-omap2/board-apollon.c:353: undefined reference to `omap2_set_globals_242x' make: *** [.tmp_vmlinux1] Error 1 Fix this by making the boards depend on the Kconfig option for the specific SoC that they use. Also, while here, fix the mach-omap2/board-generic.c file to remove the dependency on OMAP2420. Charulatha Varadarajan <charu@ti.com> caught a typo - thanks Charu. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Charulatha Varadarajan <charu@ti.com>
2010-10-08omap3: Add minimal OMAP3 IGEP module supportEnric Balletbo i Serra1-0/+6
The OMAP3 IGEP module is a low-power, high performance production-ready system-on-module (SOM) based on TI's OMAP3 family. More about this board at www.igep.es. Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com> [tony@atomide.com: updated for the mmc changes and to be selected by default] Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-29OMAP: SERIAL: Enable omap-serial driver in KconfigGovindraj.R1-3/+8
Enable omap-serial driver in /mach-omap2/Kconfig and move 8250 driver selection for zoom boards. With omap-serial driver addition all omap-uarts can be handled with omap-serial driver. With addition of omap-serial driver console parameter needs be changed in bootargs from ttyS* should be replaced with ttyO* [O --> OMAP not ZERO] For example: ttyS0[UART1 on 3430SDP] changes to ttyO0. But with some boards that do not use omap-uart as console uart. we need to handle them with 8250 driver. Ex: ZOOM2/3. For zoom2/3 board we need to use 8250 serial driver and console parameter will remain ttyS0 which basically uses a Quad uart placed on the debug board connected through a gpio line. Signed-off-by: Govindraj.R <govindraj.raja@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-28ARM: OMAP3LOGIC: Adding LogicPD OMAP3 board supportTim Nordell1-0/+20
Adding support for LogicPD's OMAP 3530 LV SOM and OMAP 35x Torpedo board. Signed-off-by: Tim Nordell <tim.nordell@logicpd.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-27omap3: Introduce CompuLab CM-T3517 moduleIgor Grinberg1-0/+7
Add basic suppot, enable uart and led. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-20omap: Update and rename common defconfig for omap2plus devicesSantosh Shilimkar1-1/+3
This patch addresses below things - Renaming existing omap3_defconfig which has OMAP2, OMAP3 and OMAP4 builds enabled to more appropriate name 'omap2plus_defconfig' - L1 cache shift is suppose to be 5 on OMAP4 where as it is 6 on previous OMAPs. Keeping it to 5 is safer option for OMAP4 and previous OMAPs. For OMAP3 only build the shift would be still 6 - Enable needed Errata's for OMAP4 to work with DMA based device drivers CONFIG_PL310_ERRATA_588369=y CONFIG_ARM_ERRATA_720789=y - Enable the Micrel ethernet controller CONFIG_KS8851=y CONFIG_KS8851_MLL=y With above three changes, OMAP4 ethernet, mmc etc works reliably. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-08-02omap4: Add OMAP4 Panda SupportDavid Anders1-0/+5
Add initial support for the OMAP4 based Panda Board. Signed-off-by: David Anders <x0132446@ti.com> [tony@atomide.com: selected board by default in Kconfig] Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05omap2/3/4: Add Kconfig option to compile in typical omap featuresTony Lindgren1-0/+21
This produces a sane config that's suitable for using as the base for most omap2/3/4 boards. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05omap2/3/4: Select all omaps and boards by defaultTony Lindgren1-0/+28
Select all omaps and boards by default Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05omap2/3/4: Move Kconfig options to mach-omap2/KconfigTony Lindgren1-0/+18
Move omap2/3/4 specific Kconfig options to mach-omap2/Kconfig Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05omap: Make omap specific features appear under Kconfig menuTony Lindgren1-0/+7
This will make Kconfig look nicer for selecting omap processor type Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05omap: mux: Select POP package for 2430SDPTony Lindgren1-0/+1
Select POP package for 2430SDP Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05omap: mux: Select POP package for N8X0Tony Lindgren1-0/+1
Select POP package for N8X0 Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05omap: mux: Select POP package for ApollonTony Lindgren1-0/+1
Select POP package for Apollon Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05omap: mux: Select SIP package for H4Tony Lindgren1-0/+1
Select SIP package for H4 Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05omap: mux: Add data for 2420Tony Lindgren1-0/+6
Add data for 2420. Big thanks to Paul Walmsley <paul@pwsan.com> for generating usable mux data out of TRMs. Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20omap3: Add support for OMAP3Stalker boardsJason1-0/+6
Add support for OMAP3Stalker boards Signed-off-by: Jason Lam <lzg@ema-tech.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20omap2: select ARCH_OMAP_OTG for OMAP2430 SDPViral Mehta1-0/+1
Configuration for OMAP2430 should select ARCH_OMAP_OTG just like it is done for OMAP2420 Signed-off-by: Viral Mehta <viral.mehta@lntinfotech.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: Devkit8000: Add missing package selectionThomas Weber1-2/+4
Devkit8000 uses the CUS package for OMAP3530. This patch adds missing package selection for CUS and enables CONFIG_MUX. Replace whitespace with tab in Kconfig. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-19Add minimal support for DevKit8000Thomas Weber1-0/+4
These patches add board support for the Timll DevKit8000. The DevKit8000 is a beagle board clone from Timll, sold by armkits.com. The DevKit8000 has RS232 serial port, LCD, DVI-D, S-Video, Ethernet, SD/MMC, keyboard, camera, SPI, I2C, USB and JTAG interface. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-17omap3: Fix typo on IGEP v2 boardEnric Balletbo i Serra1-1/+1
Fix typo on IGEP v2 board Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-17 23:33:42 +0000