summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-mxs
AgeCommit message (Collapse)AuthorFilesLines
2013-05-07Merge tag 'dt-for-linus-2' of ↵Linus Torvalds1-170/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device tree updates (part 2) from Arnd Bergmann: "These are mostly new device tree bindings for existing drivers, as well as changes to the device tree source files to add support for those devices, and a couple of new boards, most notably Samsung's Exynos5 based Chromebook. The changes depend on earlier platform specific updates and touch the usual platforms: omap, exynos, tegra, mxs, mvebu and davinci." * tag 'dt-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (169 commits) ARM: exynos: dts: cros5250: add EC device ARM: dts: Add sbs-battery for exynos5250-snow ARM: dts: Add i2c-arbitrator bus for exynos5250-snow ARM: dts: add mshc controller node for Exynos4x12 SoCs ARM: dts: Add chip-id controller node on Exynos4/5 SoC ARM: EXYNOS: Create virtual I/O mapping for Chip-ID controller using device tree ARM: davinci: da850-evm: add SPI flash support ARM: davinci: da850: override SPI DT node device name ARM: davinci: da850: add SPI1 DT node spi/davinci: add DT binding documentation spi/davinci: no wildcards in DT compatible property ARM: dts: mvebu: Convert mvebu device tree files to 64 bits ARM: dts: mvebu: introduce internal-regs node ARM: dts: mvebu: Convert all the mvebu files to use the range property ARM: dts: mvebu: move all peripherals inside soc ARM: dts: mvebu: fix cpus section indentation ARM: davinci: da850: add EHRPWM & ECAP DT node ARM/dts: OMAP3: fix pinctrl-single configuration ARM: dts: Add OMAP3430 SDP NOR flash memory binding ARM: dts: Add NOR flash bindings for OMAP2420 H4 ...
2013-05-02Merge tag 'multiplatform-for-linus' of ↵Linus Torvalds9-139/+31
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC multiplatform updates from Olof Johansson: "More multiplatform enablement for ARM platforms. The ones converted in this branch are: - bcm2835 - cns3xxx - sirf - nomadik - msx - spear - tegra - ux500 We're getting close to having most of them converted! One of the larger platforms remaining is Samsung Exynos, and there are a bunch of supporting patches in this merge window for it. There was a patch in this branch to a early version of multiplatform conversion, but it ended up being reverted due to need of more bake time. The revert commit is part of the branch since it would have required rebasing multiple dependent branches and they were stable by then" * tag 'multiplatform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (70 commits) mmc: sdhci-s3c: Fix operation on non-single image Samsung platforms clocksource: nomadik-mtu: fix up clocksource/timer Revert "ARM: exynos: enable multiplatform support" ARM: SPEAr13xx: Fix typo "ARCH_HAVE_CPUFREQ" ARM: exynos: enable multiplatform support rtc: s3c: make header file local mtd: onenand/samsung: make regs-onenand.h file local thermal/exynos: remove unnecessary header inclusions mmc: sdhci-s3c: remove platform dependencies ARM: samsung: move mfc device definition to s5p-dev-mfc.c ARM: exynos: move debug-macro.S to include/debug/ ARM: exynos: prepare for sparse IRQ ARM: exynos: introduce EXYNOS_ATAGS symbol ARM: tegra: build assembly files with -march=armv7-a ARM: Push selects for TWD/SCU into machine entries ARM: ux500: build hotplug.o for ARMv7-a ARM: ux500: move to multiplatform ARM: ux500: make remaining headers local ARM: ux500: make irqs.h local to platform ARM: ux500: get rid of <mach/[hardware|db8500-regs].h> ...
2013-05-02Merge tag 'soc-for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "This branch contains part 1 of the platform updates for 3.10. Among the highlights: - Support for the new Atmel Cortex-A5 based platforms (SAMA5D3) - New support for CSR SiRFatlas6 SoCs - A handful of updates for NVidia T114 (a.k.a. Tegra 4) - A bunch of updates for the shmobile platforms - A handful of updates for davinci - A few updates for Qualcomm MSM - Plus a handful of other patches, defconfig updates, etc." * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (135 commits) ARM: tegra: pm: fix build error w/o PM_SLEEP ARM: davinci: ensure global variables are declared ARM: davinci: sram.c: fix incorrect type in assignment ARM: davinci: da8xx dt: make file local symbols static ARM: davinci: da8xx: add remoteproc support ARM: socfpga: Upgrade clk driver for socfpga to make use of dts clock entries ARM: socfpga: Add clock entries into device tree ARM: socfpga: Enable soft reset ARM: EXYNOS: replace cpumask by the corresponding macro ARM: EXYNOS: handle properly the return values ARM: EXYNOS: factor out the idle states ARM: OMAP4: Enable fix for Cortex-A9 erratas ARM: OMAP2+: Export SoC information to userspace ARM: OMAP2+: SoC name and revision unification ARM: OMAP2+: Move common part of late init into common function ARM: tegra: pm: remove duplicated include from pm.c ARM: davinci: da850: override mmc DT node device name ARM: davinci: da850: add mmc DT entries mmc: davinci_mmc: add DT support ARM: SAMSUNG: check processor type before cache restoration in resume ...
2013-04-04ARM: mxs: move display timing configurations into device treeShawn Guo1-158/+0
Move display timing configurations into device tree, so that the auxdata for mxsfb driver can be killed. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-04ARM: mxs: remove unneeded enet_out clk initializationShawn Guo1-12/+0
With fec driver taking care of enet_out clk, most of board setup do not need to enable enet_out clk. So remove them. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-04ARM: mxs: enable multiplatform buildShawn Guo5-109/+13
Remove files that are not needed by multiplatform build, and make necessary changes on Kconfig to enable multiplatform build. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-04ARM: mxs: rename debug-macro.S for multiplatform buildShawn Guo1-27/+0
Rename arch/arm/mach-mxs/include/mach/debug-macro.S to arch/arm/include/debug/mxs.S for multiplatform build. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-04ARM: mxs: call mxs_pm_init() as a machine_desc hookShawn Guo3-3/+18
The device_initcall is not a friend of multiplatform build. Call mxs_pm_init() as a machine_desc hook instead of device_initcall. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01ARM: mxs: remove unused headersShawn Guo5-533/+27
Most of the stuff in the headers are used nowhere now. Move a few things that are useful for mach-mxs.c into there and remove the headers. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01ARM: mxs: merge imx23 and imx28 into one machine_descShawn Guo1-30/+13
Most of the function hooks are same between imx23 and imx28 machine_desc, so merge them into one. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01ARM: mxs: remove common.hShawn Guo2-21/+1
All three remaining functions declared in common.h are implemented by clock driver. Create header include/linux/clk/mxs.h to contain them and remove common.h. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01ARM: mxs: move mxs_get_ocotp() into mach-mxs.cShawn Guo4-105/+76
All the users of mxs_get_ocotp() are in mach-mxs.c. Move the function into mach-mxs.c, make it a static function, and then remove ocotp.c. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01ARM: mxs: remove mm.cShawn Guo3-55/+1
The static mapping is used nowhere now. Hence mm.c can be removed completely. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01ARM: mxs: use debug_ll_io_init for low-level debugShawn Guo2-8/+6
The only user of the static mapping done in mx23_map_io and mx28_map_io is low-level debug now. Use debug_ll_io_init() instead, so that the static mapping is used nowhere and can be removed completely later. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01ARM: mxs: get ocotp base address from device treeShawn Guo1-1/+8
Instead of using the static definitions, get ocotp base address from device tree with mapping. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01ARM: mxs: remove system.cShawn Guo4-140/+38
There is no user of function mxs_reset_block() now. Let's move mxs_restart() into mach-mxs.c as a static function and remove system.c completely. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01ARM: mxs: get reset address from device treeShawn Guo1-19/+17
Instead of using static address definition, get reset address from device tree with mapping, so that core_initcall mxs_arch_reset_init() can be killed. The "rtc" clock code in mxs_arch_reset_init() seems to be zombie, since there is no clk lookup defined in clock driver at all. Remove it together. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01ARM: mxs: remove empty hardware.hShawn Guo2-24/+0
The hardware.h is an empty header and used nowhere now. Remmove it. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01ARM: mxs: Select ARM_CPU_SUSPENDFabio Estevam1-0/+2
Select ARM_CPU_SUSPEND so that suspend/resume can be tested on mxs platforms. Tested on a mx28evk board: $ echo enabled > /sys/devices/80000000.apb/80040000.apbx/80074000.serial/tty/ttyAMA0/power/wakeup $ echo mem > /sys/power/state [ 507.040000] PM: Syncing filesystems ... done. [ 507.060000] mmc0: card e624 removed [ 507.160000] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 507.180000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 507.200000] Suspending console(s) (use no_console_suspend to debug) (Then send any character via DUART to wakeup the system). [ 507.220000] PM: suspend of devices complete after 10.468 msecs [ 507.220000] PM: late suspend of devices complete after 3.531 msecs [ 507.230000] PM: noirq suspend of devices complete after 5.187 msecs [ 507.230000] PM: noirq resume of devices complete after 2.312 msecs [ 507.230000] PM: early resume of devices complete after 2.437 msecs [ 507.320000] PM: resume of devices complete after 81.312 msecs [ 507.360000] Restarting tasks ... done. [ 507.530000] mmc0: new SDHC card at address e624 [ 507.550000] mmcblk0: mmc0:e624 SU04G 3.69 GiB [ 507.560000] mmcblk0: p1 p2 p3 [ 509.240000] libphy: 800f0000.etherne:01 - Link is Down [ 511.240000] libphy: 800f0000.etherne:01 - Link is Up Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01ARM: mxs: remove unneeded mach-types.h inclusionShawn Guo1-1/+0
Remove the unneeded mach-types.h inclusion from mxs.h, which is a leftover from commit 845da6b (ARM: mxs: detect SoC by checking CHIPID register). Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01ARM: mxs: move icoll driver into drivers/irqchipShawn Guo4-134/+5
Move icoll.c into drivers/irqchip as irq-mxs.c, and along with the renaming, change the driver to use IRQCHIP_DECLARE. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01ARM: mxs: call stmp_reset_block() in icollShawn Guo1-2/+2
Call stmp_reset_block() rather than mxs_reset_block(), so that <mach/common.h> inclusion can be removed from icoll driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01ARM: mxs: get icoll base address from device treeShawn Guo1-2/+5
Rather than using the static definition, it gets icoll base address with mapping from device tree. As the result, <mach/mxs.h> inclusion can be removed from the driver now. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01ARM: mxs: move timer driver into drivers/clocksourceShawn Guo2-305/+1
Move mxs timer driver into drivers/clocksource as mxs_timer.c. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01ARM: mxs: select STMP_DEVICE and use it for timer codeShawn Guo1-9/+8
Select STMP_DEVICE and in timer code replace mxs_reset_block() with stmp_reset_block(), use STMP_OFFSET_REG_SET/CLR to replace __mxs_setl/clrl. As the result, <mach/mxs.h> and <mach/common.h> includsion can be removed from timer.c now. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01ARM: mxs: remove cpu_is_mx23() call from timer codeShawn Guo1-1/+2
Remove cpu_is_mx23() call from timer code by using of_device_is_compatible() instead. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01ARM: mxs: get timrot base address from device treeShawn Guo1-1/+5
Instead of using static defines, it gets timrot base address with mapping from device tree. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01ARM: mxs: look up timrot clock from device treeShawn Guo1-1/+1
Change call clk_get_sys() to of_clk_get() to look up timrot clock from device tree, so that the clk_register_clkdev() call for timrot can be saved in clock driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01ARM: mxs: use CLKSRC_OF helper to initialize timerShawn Guo3-9/+5
Select CLKSRC_OF and use clocksource_of_init() to initialize timer, so that the call to mxs_timer_init() in clock driver can be removed. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-19ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0Marek Vasut1-12/+12
The issue fixed by this patch manifests only then using X11 with mxsfb driver. The X11 will display either shifted image or otherwise distorted image on the LCD. The problem is that the X11 tries to reconfigure the framebuffer and along the way calls fb_ops.fb_set_par() with X11's desired configuration values. The field of particular interest is fb_info->var.sync which contains non-standard values if configured by kernel. These are either FB_SYNC_DATA_ENABLE_HIGH_ACT, FB_SYNC_DOTCLK_FAILING_ACT or both, depending on the platform configuration. Both of these values are defined in the include/linux/mxsfb.h file. The driver interprets these values and configures the LCD controller accordingly. Yet X11 only has access to the standard values for this field defined in include/uapi/linux/fb.h and thus, unlike kernel, omits these special values. This results in distorted image on the LCD. This patch moves these non-standard values into new field of the mxsfb_platform_data structure so the driver can in turn check this field instead of the video mode field for these specific portions. Moreover, this patch prefixes these values with MXSFB_SYNC_ prefix instead of FB_SYNC_ prefix to prevent confusion of subsequent users. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Linux ARM <linux-arm-kernel@lists.infradead.org> Cc: Linux FBDEV <linux-fbdev@vger.kernel.org> Cc: Lothar Waßmann <LW@karo-electronics.de> Cc: Sascha Hauer <kernel@pengutronix.de> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-07ARM: mxs: cfa10049: Fix fb initialisation functionMaxime Ripard1-5/+5
Commit 1fe42740 ("ARM: dts: mxs: Add the LCD to the 10049 board") seem to have been applied with some fuzzyness, and the framebuffer initialisation code for the CFA-10049 ended up in the CFA-10037 initialisation function. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-04ARM: mxs: ocotp: Fix sparse warningFabio Estevam1-0/+1
Include <mach/common.h> header to fix the following sparse warning: arch/arm/mach-mxs/ocotp.c:33:11: warning: symbol 'mxs_get_ocotp' was not declared. Should it be static? Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-04ARM: mxs: icoll: Fix sparse warningFabio Estevam1-1/+1
Fix the following sparse warning: arch/arm/mach-mxs/icoll.c:103:13: warning: symbol 'icoll_of_init' was not declared. Should it be static? Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-04ARM: mxs: mm: Fix sparse warningFabio Estevam1-0/+1
Include <mach/common.h> header to fix the following sparse warnings: arch/arm/mach-mxs/mm.c:43:13: warning: symbol 'mx23_map_io' was not declared. Should it be static? arch/arm/mach-mxs/mm.c:48:13: warning: symbol 'mx28_map_io' was not declared. Should it be static? Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-21Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-0/+30
Pull ARM SoC device tree conversions from Arnd Bergmann: "These are device tree conversions for a number of platforms, with the intention of turning code from board files into device tree descriptions. Notable changes are: - davinci bindings for pinctrl, MTD, RTC, watchdog and i2c - nomadik bindings for all devices, removing the board files - bcm2835 bindings for mmc and i2c - tegra bindings for hdmi, keyboard, audio, as well as some updates - at91 bindings for hardware ecc and for devices on RM9200 - mxs bindings for cfa100xx - sunxi support for Miniand Hackberry board" * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (72 commits) Revert "sunxi: a10-cubieboard: Add user LEDs to the device tree" Revert "sunxi: a13-olinuxino: Add user LED to the device tree" clk: tegra: initialise parent of uart clocks ARM: tegra: remove clock-frequency properties from serial nodes clk: tegra: fix driver to match DT binding clk: tegra: local arrays should be static clk: tegra: Add missing spinlock for hclk and pclk clk: tegra: Implement locking for super clock clk: tegra: fix wrong clock index between se to sata_cold sunxi: a13-olinuxino: Add user LED to the device tree ARM: davinci: da850 DT: add support for machine reboot ARM: davinci: da850: add wdt DT node ARM: davinci: da850: add DT node for I2C0 ARM: at91: at91sam9n12: add DT parameters to enable PMECC ARM: at91: at91sam9x5: add DT parameters to enable PMECC ARM: at91: add EMAC bindings to RM9200 DT ARM: at91: add SSC bindings to RM9200 DT ARM: at91: add MMC bindings to RM9200 DT ARM: at91: Animeo IP: enable watchdog support ARM: nomadik: fix OF compilation regression ...
2013-02-21Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-5/+7
Pull ARM SoC-specific updates from Arnd Bergmann: "This is a larger set of new functionality for the existing SoC families, including: - vt8500 gains support for new CPU cores, notably the Cortex-A9 based wm8850 - prima2 gains support for the "marco" SoC family, its SMP based cousin - tegra gains support for the new Tegra4 (Tegra114) family - socfpga now supports a newer version of the hardware including SMP - i.mx31 and bcm2835 are now using DT probing for their clocks - lots of updates for sh-mobile - OMAP updates for clocks, power management and USB - i.mx6q and tegra now support cpuidle - kirkwood now supports PCIe hot plugging - tegra clock support is updated - tegra USB PHY probing gets implemented diffently" * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (148 commits) ARM: prima2: remove duplicate v7_invalidate_l1 ARM: shmobile: r8a7779: Correct TMU clock support again ARM: prima2: fix __init section for cpu hotplug ARM: OMAP: Consolidate OMAP USB-HS platform data (part 3/3) ARM: OMAP: Consolidate OMAP USB-HS platform data (part 1/3) arm: socfpga: Add SMP support for actual socfpga harware arm: Add v7_invalidate_l1 to cache-v7.S arm: socfpga: Add entries to enable make dtbs socfpga arm: socfpga: Add new device tree source for actual socfpga HW ARM: tegra: sort Kconfig selects for Tegra114 ARM: tegra: enable ARCH_REQUIRE_GPIOLIB for Tegra114 ARM: tegra: Fix build error w/ ARCH_TEGRA_114_SOC w/o ARCH_TEGRA_3x_SOC ARM: tegra: Fix build error for gic update ARM: tegra: remove empty tegra_smp_init_cpus() ARM: shmobile: Register ARM architected timer ARM: MARCO: fix the build issue due to gic-vic-to-irqchip move ARM: shmobile: r8a7779: Correct TMU clock support ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles ARM: mxs: use apbx bus clock to drive the timers on timrotv2 ...
2013-02-09Merge tag 'mxs-dt-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Olof Johansson1-0/+30
into next/dt From Shawn Guo: mxs device tree changes for 3.9 - Mostly cfa100xx related device tree source updates * tag 'mxs-dt-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: mxs: dts: Add rotary encoder to the CFA-10049 ARM: mxs: dts: Add gpio-keys for the rotary to the CFA-10049 ARM: dts: mxs: Add the LCD to the 10049 board ARM: dts: mxs: Add muxing options for the third PWM ARM: dts: cfa10049: Change the SPI3 bus to spi-gpio ARM: mxs: dt: Add Crystalfontz CFA-10037 device tree support ARM: mxs: Enable touchscreen on m28evk ARM: dts: cfa10049: Add PCA9555 GPIO expander to the device tree
2013-02-09Merge tag 'mxs-soc-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Olof Johansson1-5/+7
into next/soc From Shawn Guo: mxs soc changes for 3.9 - A couple of optimization on timer - Some updates on mxs_defconfig * tag 'mxs-soc-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles ARM: mxs: use apbx bus clock to drive the timers on timrotv2 ARM: mxs: Update mxs_defconfig
2013-02-05Merge tag 'cleanup-decompwdog-3.9' of ↵Olof Johansson1-1/+0
git://git.linaro.org/people/shawnguo/linux-2.6 into next/cleanup From Shawn Guo: The series cleans up ARCH_HAS_DECOMP_WDOG and arch_decomp_wdog which are unused on ARM architecure. Samsung has some code setting up wdog in arch_decomp_wdog(). But since CONFIG_S3C_BOOT_WATCHDOG is defined nowhere, it will not run. Otherwise, system can not boot at all when wdog is set up but no one pats it. * tag 'cleanup-decompwdog-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: samsung: remove unused arch_decomp_wdog() code ARM: remove unused arch_decomp_wdog() ARM: decompress: remove unused ARCH_HAS_DECOMP_WDOG Signed-off-by: Olof Johansson <olof@lixom.net>
2013-02-05ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cyclesTorben Hohn1-1/+2
Signed-off-by: Torben Hohn <torbenh@linutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-05ARM: mxs: use apbx bus clock to drive the timers on timrotv2Torben Hohn1-4/+5
timer resolution of ~32us is pretty low. v2 has 32bits resolution, so we have quite some headroom, and can use the 24MHz clock. v1 has only 16bits, so we only increase v2. So we just exchange the timrot clock in imx28. On imx23 we have timrotv1 and everything stays the same. Signed-off-by: Torben Hohn <torbenh@linutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-29ARM: dts: mxs: Add the LCD to the 10049 boardMaxime Ripard1-0/+22
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-26ARM: mxs: dt: Add Crystalfontz CFA-10037 device tree supportMaxime Ripard1-0/+8
The CFA-10037 is another expansion board for the CFA-10036 module, with only a USB Host, a Ethernet device and a lot of gpios. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-14Merge branch 'clocksource/cleanup' into next/cleanupOlof Johansson1-19/+5
Clockevent cleanup series from Shawn Guo. Resolved move/change conflict in mach-pxa/time.c due to the sys_timer cleanup. * clocksource/cleanup: clocksource: use clockevents_config_and_register() where possible ARM: use clockevents_config_and_register() where possible clockevents: export clockevents_config_and_register for module use + sync to Linux 3.8-rc3 Signed-off-by: Olof Johansson <olof@lixom.net> Conflicts: arch/arm/mach-pxa/time.c
2013-01-14ARM: use clockevents_config_and_register() where possibleShawn Guo1-19/+5
The clockevent core is able to figure out the best mult and shift, calculate min_delta_ns and max_delta_ns, with the necessary info passed into clockevents_config_and_register(). Use this combined configure and register function where possible to make the codes less error prone and gain some positive diff stat. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Anton Vorontsov <cbouatmailru@gmail.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Tested-by: Roland Stigge <stigge@antcom.de> Acked-by: Eric Miao <eric.y.miao@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: David Brown <davidb@codeaurora.org> Tested-by: Tony Lindgren <tony@atomide.com> Acked-by: Barry Song <baohua.song@csr.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Tony Prisk <linux@prisktech.co.nz> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-11ARM: remove unused arch_decomp_wdog()Shawn Guo1-1/+0
With ARCH_HAS_DECOMP_WDOG removed from arch/arm/boot/compressed/decompress.c, all the arch_decomp_wdog() definition at platform level is unneeded. Remmove it. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Jason Cooper <jason@lakedaemon.net>
2012-12-24ARM: delete struct sys_timerStephen Warren1-10/+2
Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-12-18Merge branch 'next' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc update from Benjamin Herrenschmidt: "The main highlight is probably some base POWER8 support. There's more to come such as transactional memory support but that will wait for the next one. Overall it's pretty quiet, or rather I've been pretty poor at picking things up from patchwork and reviewing them this time around and Kumar no better on the FSL side it seems..." * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (73 commits) powerpc+of: Rename and fix OF reconfig notifier error inject module powerpc: mpc5200: Add a3m071 board support powerpc/512x: don't compile any platform DIU code if the DIU is not enabled powerpc/mpc52xx: use module_platform_driver macro powerpc+of: Export of_reconfig_notifier_[register,unregister] powerpc/dma/raidengine: add raidengine device powerpc/iommu/fsl: Add PAMU bypass enable register to ccsr_guts struct powerpc/mpc85xx: Change spin table to cached memory powerpc/fsl-pci: Add PCI controller ATMU PM support powerpc/86xx: fsl_pcibios_fixup_bus requires CONFIG_PCI drivers/virt: the Freescale hypervisor driver doesn't need to check MSR[GS] powerpc/85xx: p1022ds: Use NULL instead of 0 for pointers powerpc: Disable relocation on exceptions when kexecing powerpc: Enable relocation on during exceptions at boot powerpc: Move get_longbusy_msecs into hvcall.h and remove duplicate function powerpc: Add wrappers to enable/disable relocation on exceptions powerpc: Add set_mode hcall powerpc: Setup relocation on exceptions for bare metal systems powerpc: Move initial mfspr LPCR out of __init_LPCR powerpc: Add relocation on exception vector handlers ...
2012-11-20ARM: mxs: Add SchulerControl SPS1 DTS fileMarek Vasut1-0/+7
Add DTS file for this custom board. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-15powerpc+of: Rename the drivers/of prom_* functions to of_*Nathan Fontenot1-1/+1
Rename the prom_*_property routines of the generic OF code to of_*_property. This brings them in line with the naming used by the rest of the OF code. Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Acked-by: Geoff Levand <geoff@infradead.org> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-25 09:46:47 +0000