summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-lpc32xx
AgeCommit message (Collapse)AuthorFilesLines
2022-08-18ARM: remove obsolete Makefile.boot infrastructureArnd Bergmann1-4/+0
There are a number of old Makefile.boot files that remain from the multiplatform conversion, and three that are still in use. These provide the "ZRELADDR", "PARAMS_PHYS" and "INITRD_PHYS" values that are platform specific. It turns out that we can generally just derive this from information that is available elsewhere: - ZRELADDR is normally detected at runtime with the CONFIG_AUTO_ZRELADDR flag, but also needed to be passed to for 'make uImage'. In a multiplatform kernel, one always has to pass this as the $(LOADADDR) variable, but in the StrongARM kernels we can derive it from the sum of $(CONFIG_PHYS_OFFSET) and $(TEXT_OFFSET) that are already known. - PARAMS_PHYS and INITRD_PHYS are only used for bootpImage, which in turn is only used for the pre-ATAGS 'param_struct' based boot interface on StrongARM based machines with old boot loaders. They can both be derived from CONFIG_PHYS_OFFSET and a machine specific offset for the initrd, so all of the logic for these can be part of arch/arm/boot/bootp/Makefile. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-06-10treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_56.RULE ↵Thomas Gleixner2-8/+4
(part 1) Based on the normalized pattern: this file is licensed under the terms of the gnu general public license version 2 this program is licensed as is without any warranty of any kind whether express or implied extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference. Reviewed-by: Allison Randal <allison@lohutok.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08ARM: rework endianess selectionArnd Bergmann1-0/+1
Choosing big-endian vs little-endian kernels in Kconfig has not worked correctly since the introduction of CONFIG_ARCH_MULTIPLATFORM a long time ago. The problems is that CONFIG_BIG_ENDIAN depends on ARCH_SUPPORTS_BIG_ENDIAN, which can set by any one platform in the config, but would actually have to be supported by all of them. This was mostly ok for ARMv6/ARMv7 builds, since these are BE8 and tend to just work aside from problems in nonportable device drivers. For ARMv4/v5 machines, CONFIG_BIG_ENDIAN and CONFIG_ARCH_MULTIPLATFORM were never set together, so this was disabled on all those machines except for IXP4xx. As IXP4xx can now become part of ARCH_MULTIPLATFORM, it seems better to formalize this logic: all ARMv4/v5 platforms get an explicit dependency on being either big-endian (ixp4xx) or little-endian (the rest). We may want to fix ixp4xx in the future to support both, but it does not work in LE mode at the moment. For the ARMv6/v7 platforms, there are two ways this could be handled a) allow both modes only for platforms selecting 'ARCH_SUPPORTS_BIG_ENDIAN' today, but only LE mode for the others, given that these were added intentionally at some point. b) allow both modes everwhere, given that it was already possible to build that way by e.g. selecting ARCH_VIRT, and that the list is not an accurate reflection of which platforms may or may not work. Out of these, I picked b) because it seemed slighly more logical to me. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-15ARM: lpc32xx: allow multiplatform buildArnd Bergmann2-48/+11
All preparation work is done, so the platform can finally be moved into ARCH_MULTIPLATFORM. This requires a small change to the defconfig file to enable the platform. Link: https://lore.kernel.org/r/20190809144043.476786-14-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-15ARM: lpc32xx: clean up header filesArnd Bergmann8-66/+21
All device drivers have stopped relying on mach/*.h headers, so move the remaining headers into arch/arm/mach-lpc32xx/lpc32xx.h to prepare for multiplatform builds. The mach/entry-macro.S file has been unused for a long time now and can simply get removed. Link: https://lore.kernel.org/r/20190809144043.476786-13-arnd@arndb.de Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-15serial: lpc32xx: allow compile testingArnd Bergmann1-0/+30
The lpc32xx_loopback_set() function in hte lpc32xx_hs driver is the one thing that relies on platform header files. Move that into the core platform code so we only need a variable declaration for it, and enable COMPILE_TEST building. Link: https://lore.kernel.org/r/20190809144043.476786-12-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-15net: lpc-enet: move phy setup into platform codeArnd Bergmann1-0/+12
Setting the phy mode requires touching a platform specific register, which prevents us from building the driver without its header files. Move it into a separate function in arch/arm/mach/lpc32xx to hide the core registers from the network driver. Link: https://lore.kernel.org/r/20190809144043.476786-8-arnd@arndb.de Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-15net: lpc-enet: factor out iram accessArnd Bergmann3-18/+7
The lpc_eth driver uses a platform specific method to find the internal sram. This prevents building it on other machines. Rework to only use one function call and keep the other platform internals where they belong. Ideally this would look up the sram location from DT, but as this is a rarely used driver, I want to keep the modifications to a minimum. Link: https://lore.kernel.org/r/20190809144043.476786-7-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner8-80/+8
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-19ARM: lpc32xx: use SPDX license identifierVladimir Zapolskiy1-10/+1
Replace GPLv2+ header with the SPDX identifier. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2019-04-19ARM: lpc32xx: remove platform data of SSP0 and SSP1 controllersVladimir Zapolskiy1-2/+0
Both controllers are described in lpc32xx.dtsi and there is no any specific platform data added in the platform file. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2019-04-19ARM: lpc32xx: remove redundant included headersVladimir Zapolskiy1-22/+2
While the majority of platform data was moved to device tree description the list of included header files remained untouched, the change cleans it up to an irreducible and observable subset. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2019-04-19ARM: lpc32xx: stop overwriting TEST_CLK_SELAlexandre Belloni1-5/+0
While the UDA1380 is described in some lpc3250 device trees, there is currently no real user of that codec. Anyway, if the codec needs a clock, it should take it explicitly. lpc3250_machine_init is called for all the lpc32xx machines and some are using test1_clk (for example to strobe an HW watchdog). Overwriting TEST_CLK_SEL prevents booting those platforms. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2019-02-03ARM: lpc32xx: remove platform data of ARM PL111 LCD controllerVladimir Zapolskiy1-77/+0
The auxilary platform data added for the LCD controller is not needed anymore, because the controller and a connected panel are properly described in Phytec phyCORE-LPC3250 board dts file. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2019-02-03ARM: lpc32xx: remove platform data of ARM PL180 SD/MMC controllerVladimir Zapolskiy1-7/+0
The auxilary platform data added for the SD/MMC controller is redundant, because it is obtained properly from its description in board dts files. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2019-02-03ARM: lpc32xx: Use kmemdup to replace duplicating its implementationzhong jiang1-5/+2
kmemdup is better than kmalloc() + memcpy(), and we do not like open code. So just use kmemdup instead. Signed-off-by: zhong jiang <zhongjiang@huawei.com> [vzapolskiy: resolved a merge conflict] Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2019-01-26ARM: lpc32xx: Delete an error message for a failed memory allocation in ↵Markus Elfring1-5/+1
lpc32xx_pm_enter() Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdf Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2017-05-24ARM/dmaengine: pl08x: pass reasonable memcpy settingsLinus Walleij1-0/+3
We cannot use bits from configuration registers as API between platforms and driver like this, abstract it out to two enums and mimic the stuff passed as device tree data. This is done to make it possible for the driver to generate the ccfg word on-the-fly so we can support more PL08x derivatives. Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-12-15Merge tag 'armsoc-soc' of ↵Linus Torvalds4-157/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "These are updates for platform specific code on 32-bit ARM machines, essentially anything that can not (yet) be expressed using DT files. Noteworthy changes include: - Added support for the TI DRA71x family of SoCs in mach-omap2, this is an new variant of the the DRA72x/DRA74x automotive infotainment chips we already supported for a while. - Added support for the ST STM32F746 SoC, the first Cortex-M7 based microcontroller we support, related to the smaller STM32F4 family. - Renesas adds support for r8a7743 and r8a7745 in mach-shmobile, see http://elinux.org/RZ-G - SMP is now supported on the OX820 platform - A lot of code in mach-omap2 gets removed as a follow-up to removing support for board files in the previous release - Davinci has some new work to improve USB support - For i.MX, the performance monitor now supports profiling the memory controller using 'perf'" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (95 commits) ARM: davinci: da830-evm: use gpio descriptor for mmc pins ARM: davinci: da850-evm: use gpio descriptor for mmc pins ARM: davinci: hawk: use gpio descriptor for mmc pins ARM: ARTPEC-6: add select MFD_SYSCON to MACH_ARTPEC6 ARM: davinci: da8xx: Fix ohci device name ARM: oxnas: Add OX820 config and makefile entry ARM: oxnas: Add OX820 SMP support ARM: davinci: PM: fix build when da850 not compiled in ARM: orion5x: remove legacy support of ls-chl ARM: integrator: drop EBI access use syscon ARM: BCM5301X: Add back handler ignoring external imprecise aborts ARM: davinci: PM: support da8xx DT platforms ARM: davinci: PM: cleanup: remove references to pdata ARM: davinci: PM: rework init, remove platform device ARM: Kconfig: Introduce MACH_STM32F746 flag ARM: mach-stm32: Add a new SOC - STM32F746 ARM: shmobile: document SK-RZG1E board ARM: shmobile: r8a7745: basic SoC support ARM: imx: mach-imx6ul: add imx6ull support ARM: zynq: Reserve correct amount of non-DMA RAM ...
2016-11-26ARM: lpc32xx: drop duplicate header device.hGeliang Tang1-1/+0
Drop duplicate header device.h from phy3250.c. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Reviewed-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-10-25ARM: lpc32xx: remove unused header file clock.hVladimir Zapolskiy2-39/+0
The removed clock.h file is a leftover after moving the platform to a common clock framework driver, it contains unused "struct clk" definition, which under circumstances may coalesce with a generic "struct clk" declaration for clock consumers. Also remove useless include of the removed local file from a single source file mach-lpc32xx/pm.c. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
2016-10-25ARM: lpc32xx: remove unused header file mach/irqs.hVladimir Zapolskiy2-118/+0
The removed LPC32xx mach/irqs.h file is not included in any source code, function declaration lpc32xx_init_irq() is also unused, remove them as leftovers after switching to a new interrupt controller driver. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
2016-06-23arm: use of_platform_default_populate() to populateKefeng Wang1-2/+1
Use helper of_platform_default_populate() in linux/of_platform when possible, instead of calling of_platform_populate() with the default match table. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Krzysztof Halasa <khalasa@piap.pl> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Roland Stigge <stigge@antcom.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Ray Jui <rjui@broadcom.com> Cc: Viresh Kumar <vireshk@kernel.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Rob Herring <robh@kernel.org> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-05-24ARM: lpc32xx: fix NR_IRQS confictArnd Bergmann1-1/+1
With the change to sparse IRQs, the lpc32xx platform gets a warning about conflicting macros: In file included from arch/arm/mach-lpc32xx/irq.c:31:0: arch/arm/mach-lpc32xx/include/mach/irqs.h:115:0: warning: "NR_IRQS" redefined #define NR_IRQS 96 arch/arm/include/asm/irq.h:9:0: note: this is the location of the previous definition #define NR_IRQS NR_IRQS_LEGACY One such instance was in the old irq driver that is now removed by the previous patch, but any other file including mach/irqs.h still has the issue. Since none of them use this constant, we can just remove the old definition. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 8cb17b5ed017 ("irqchip: Add LPC32xx interrupt controller driver")
2016-05-24ARM: lpc32xx: remove legacy irq controller driverVladimir Zapolskiy2-478/+1
New NXP LPC32xx irq chip driver is used instead of a legacy one. [this also fixes a harmless build warning about the NR_IRQS redefinition] Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-05-18Merge tag 'armsoc-soc' of ↵Linus Torvalds3-119/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "We get support for three new 32-bit SoC platforms this time. The amount of changes in arch/arm for any of them is miniscule, as all the interesting code is in device driver subsystems (irqchip, clk, pinctrl, ...) these days. I'm listing them here, as the addition of the Kconfig statement is the main relevant milestone for a new platform. In each case, some drivers are are shared with existing platforms, while other drivers are added for v4.7 as well, or come in a later release. - The Aspeed platform is probably the most interesting one, this is what most whitebox servers use as their baseboard management controller. We get support for the very common ast2400 and ast2500 SoCs. The OpenBMC project focuses on this chip, and the LWN article about their ELC 2016 presentation at https://lwn.net/Articles/683320/ triggered the submission, but the code comes from IBM's OpenPOWER team rather than the team at Facebook. There are still a lot more drivers that need to get added over time, and I hope both teams can work together on that. - OXNAS is an old platform for Network Attached Storage devices from Oxford Semiconductor. There are models with ARM10 (!) and ARM11MPCore cores, but for now, we only support the original ARM9 based versions. The product lineup was subsequently part of PLX, Avago and now the new Broadcom Ltd. https://wiki.openwrt.org/doc/hardware/soc/soc.oxnas has some more information. - V2M-MPS2 is a prototyping platform from ARM for their Cortex-M cores and is related to the existing Realview / Versatile Express lineup, but without MMU. We now support various NOMMU platforms, so adding a new one is fairly straightforward. http://infocenter.arm.com/help/topic/com.arm.doc.100112_0100_03_en/ has detailed information about the platform. Other noteworthy updates: - Work on LPC32xx has resumed, and Vladimir Zapolskiy and Sylvain Lemieux are now maintaining the platform. This is an older ARM9 based platform from NXP (not Freescale), but it remains in use in embedded markets. - Kevin Hilman is now co-maintaining the Amlogic Meson platform for both 32-bit and 64-bit ARM, and started contributing some patches. - As is often the case, work on the OMAP platforms makes up the bulk of the actual SoC code changes in arch/arm, but there isn't a lot of that either" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits) MAINTAINERS: ARM/Amlogic: add co-maintainer, misc. updates MAINTAINERS: add ARM/NXP LPC32XX SoC specific drivers to the section MAINTAINERS: add new maintainers of NXP LPC32xx SoC MAINTAINERS: move ARM/NXP LPC32xx record to ARM section arm: Add Aspeed machine ARM: lpc32xx: remove duplicate const on lpc32xx_auxdata_lookup ARM: lpc32xx: remove leftovers of legacy clock source and provider drivers ARM: lpc32xx: remove reboot header file ARM: dove: Remove CLK_IS_ROOT ARM: orion5x: Remove CLK_IS_ROOT ARM: mv78xx0: Remove CLK_IS_ROOT ARM: davinci: da850: use clk->set_parent for async3 ARM: davinci: Move clock init after ioremap. MAINTAINERS: Update ARM Versatile Express platform entry ARM: vexpress/mps2: introduce MPS2 platform MAINTAINERS: add maintainer entry for ARM/OXNAS platform ARM: Add new mach-oxnas irqchip: versatile-fpga: add new compatible for OX810SE SoC ARM: uniphier: correct the call order of of_node_put() MAINTAINERS: fix stale TI DaVinci entries ...
2016-05-11irqchip: Add LPC32xx interrupt controller driverVladimir Zapolskiy1-1/+0
The change adds improved support of NXP LPC32xx MIC, SIC1 and SIC2 interrupt controllers. This is a list of new features in comparison to the legacy driver: * irq types are taken from device tree settings, no more need to hardcode them, * old driver is based on irq_domain_add_legacy, which causes problems with handling MIC hardware interrupt 0 produced by SIC1, * there is one driver for MIC, SIC1 and SIC2, no more need to handle them separately, e.g. have two separate handlers for SIC1 and SIC2, * the driver does not have any dependencies on hardcoded register offsets, * the driver is much simpler for maintenance, * SPARSE_IRQS option is supported. Legacy LPC32xx interrupt controller driver was broken since commit 76ba59f8366f ("genirq: Add irq_domain-aware core IRQ handler"), which requires a private interrupt handler, otherwise any SIC1 generated interrupt (mapped to MIC hwirq 0) breaks the kernel with the message "unexpected IRQ trap at vector 00". The change disables compilation of a legacy driver found at arch/arm/mach-lpc32xx/irq.c, the file will be removed in a separate commit. Fixes: 76ba59f8366f ("genirq: Add irq_domain-aware core IRQ handler") Tested-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-04-28ARM: lpc32xx: remove duplicate const on lpc32xx_auxdata_lookupVladimir Zapolskiy1-1/+1
Remove redundant duplicate const, which is found by smatch: arch/arm/mach-lpc32xx/phy3250.c:162:42: warning: duplicate const Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2016-04-28ARM: lpc32xx: remove leftovers of legacy clock source and provider driversVladimir Zapolskiy2-117/+1
After switching the platform to common clock framework there is no more need to keep dead code in arch/arm/mach-lpc32xx, which glued legacy clock source and clock provider drivers, remove the leftovers. Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2016-04-28ARM: lpc32xx: remove reboot header fileSylvain Lemieux1-1/+0
The header file "reboot.h" is no longer needed, following the migration of the restart code into the pnx4008 watchdog. Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2016-03-20Merge tag 'armsoc-cleanup' of ↵Linus Torvalds5-1486/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Arnd Bergmann: "A few simple cleanups across multiple platforms, not much standing out: - lpc32xx removes its private implementation of the clk API, after generic code was merged in 4.5 - all unused Makefile.boot files get removed - a number of simplifications for shmobile - asm/clkdev.h gets replaced with the asm-generic version after all mach/clkdev.h implementations are gone" * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: shmobile: Kconfig: Get rid of old comment ARM: shmobile: Consolidate SCU mapping code arm: lpc32xx: remove direct control of GPIOs from shared mach file arm: lpc32xx: remove selected HAVE_IDE arm: lpc32xx: switch to common clock framework ARM: Use generic clkdev.h header ARM: plat-versatile: Remove unused clock.c file ARM: netx: remove redundant "depends on ARCH_NETX" ARM: integrator: remove redundant select in Kconfig ARM: drop unused Makefile.boot of Multiplatform SoCs ARM: mvebu: add missing of_node_put() ARM: shmobile: r8a7779: Remove remainings of removed SCU boot setup code ARM: shmobile: Typo s/MIPDR/MPIDR/ ARM: shmobile: Add includes providing forward declarations ARM: shmobile: rcar-gen2: Make rcar_gen2_dma_contiguous static ARM: mv78xx0: use "depends on" instead of "if" after prompt
2016-03-19Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds3-17/+0
Pull watchdog updates from Wim Van Sebroeck: - new drivers for: NI 903x/913x watchdog driver, WinSystems EBC-C384 watchdog timer and ARM SBSA watchdog driver - Support for NCT6102D devices - Improvements of the generic watchdog framework (improve restart handler, make set_timeout optional, introduce infrastructure triggered keepalives, ... - improvements on the pnx4008 watchdog driver - several smaller fixes and improvements * git://www.linux-watchdog.org/linux-watchdog: (28 commits) watchdog: Ensure that wdd is not dereferenced if NULL watchdog: imx2: Convert to use infrastructure triggered keepalives watchdog: dw_wdt: Convert to use watchdog infrastructure watchdog: Add support for minimum time between heartbeats watchdog: Make stop function optional watchdog: Introduce WDOG_HW_RUNNING flag watchdog: Introduce hardware maximum heartbeat in watchdog core watchdog: Make set_timeout function optional arm: lpc32xx: remove restart handler arm: lpc32xx: phy3250 remove restart hook watchdog: pnx4008: restart: support "cmd" from userspace watchdog: pnx4008: add support for soft reset watchdog: pnx4008: add restart handler watchdog: pnx4008: update logging during power-on watchdog: tangox_wdt: test clock rate to avoid division by 0 watchdog: atlas7_wdt: test clock rate to avoid division by 0 watchdog: s3c2410_wdt: Add max and min timeout values Watchdog: introduce ARM SBSA watchdog driver Documentation: add sbsa-gwdt driver documentation watchdog: Add watchdog timer support for the WinSystems EBC-C384 ...
2016-03-16arm: lpc32xx: remove restart handlerSylvain Lemieux2-16/+0
Remove the restart handler from "mach-lpc32xx"; this functionality is now available in the pnx4008 watchdog driver. Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-03-16arm: lpc32xx: phy3250 remove restart hookSylvain Lemieux1-1/+0
Remove the restart hook assignment from phy3250; this functionality is now managed by the pnx4008 watchdog driver. Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-03-09dma, mm/pat: Rename dma_*_writecombine() to dma_*_wc()Luis R. Rodriguez1-7/+6
Rename dma_*_writecombine() to dma_*_wc(), so that the naming is coherent across the various write-combining APIs. Keep the old names for compatibility for a while, these can be removed at a later time. A guard is left to enable backporting of the rename, and later remove of the old mapping defines seemlessly. Build tested successfully with allmodconfig. The following Coccinelle SmPL patch was used for this simple transformation: @ rename_dma_alloc_writecombine @ expression dev, size, dma_addr, gfp; @@ -dma_alloc_writecombine(dev, size, dma_addr, gfp) +dma_alloc_wc(dev, size, dma_addr, gfp) @ rename_dma_free_writecombine @ expression dev, size, cpu_addr, dma_addr; @@ -dma_free_writecombine(dev, size, cpu_addr, dma_addr) +dma_free_wc(dev, size, cpu_addr, dma_addr) @ rename_dma_mmap_writecombine @ expression dev, vma, cpu_addr, dma_addr, size; @@ -dma_mmap_writecombine(dev, vma, cpu_addr, dma_addr, size) +dma_mmap_wc(dev, vma, cpu_addr, dma_addr, size) We also keep the old names as compatibility helpers, and guard against their definition to make backporting easier. Generated-by: Coccinelle SmPL Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: airlied@linux.ie Cc: akpm@linux-foundation.org Cc: benh@kernel.crashing.org Cc: bhelgaas@google.com Cc: bp@suse.de Cc: dan.j.williams@intel.com Cc: daniel.vetter@ffwll.ch Cc: dhowells@redhat.com Cc: julia.lawall@lip6.fr Cc: konrad.wilk@oracle.com Cc: linux-fbdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: luto@amacapital.net Cc: mst@redhat.com Cc: tomi.valkeinen@ti.com Cc: toshi.kani@hp.com Cc: vinod.koul@intel.com Cc: xen-devel@lists.xensource.com Link: http://lkml.kernel.org/r/1453516462-4844-1-git-send-email-mcgrof@do-not-panic.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-11arm: lpc32xx: remove direct control of GPIOs from shared mach fileVladimir Zapolskiy1-52/+0
The change removes GPIO configuration and control of LCD, backlight and SD voltage regulators from the shared among all LPC32xx boards mach file, Phytec PHY3250 board should have the description of these regulators in its DTS file. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2016-02-11arm: lpc32xx: switch to common clock frameworkVladimir Zapolskiy5-1434/+1
The change switches NXP LPC32xx platforms to LPC32xx clock driver powered by common clock framework, this obsoletes mach-lpc32xx/clock.o legacy clock driver and thus it is removed. Legacy timer driver mach-lpc32xx/timer.o strictly depends on legacy clock support, but fortunately an existing LPC32xx clock source and clock event driver completely replaces it, and thus it can be removed as well. Noticeably platform UART driver directly operates on LPC32xx source control block registers, remove this dependency to avoid overlapping with common clock framework driver, also this guarantees that UART is working expectedly. Tested-by: Sylvain Lemieux <slemieux@tycoint.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2015-09-16genirq: Remove irq argument from irq flow handlersThomas Gleixner1-2/+2
Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-08-05Merge branch 'queue/irq/arm' of ↵Olof Johansson1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next/cleanup Merge "ARM: Interrupt cleanups and API change preparation" from Thomas Gleixner: The following patch series contains the following changes: - Consolidation of chained interrupt handler setup/removal - Switch to functions which avoid a redundant interrupt descriptor lookup - Preparation of interrupt flow handlers for the 'irq' argument removal * 'queue/irq/arm' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ARM/orion/gpio: Prepare gpio_irq_handler for irq argument removal ARM/pxa: Prepare balloon3_irq_handler for irq argument removal ARM/pxa: Prepare *_irq_handler for irq argument removal ARM/dove: Prepare pmu_irq_handler for irq argument removal ARM/sa1111: Prepare sa1111_irq_handler for irq argument removal ARM/locomo: Prepare locomo_handler for irq argument removal ARM, irq: Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc ARM/LPC32xx: Use irq_set_handler_locked() ARM/irq: Use access helper irq_data_get_affinity_mask() ARM/locomo: Consolidate chained IRQ handler install/remove ARM/orion: Consolidate chained IRQ handler install/remove Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-28ARM: kill off set_irq_flags usageRob Herring1-1/+1
set_irq_flags is ARM specific with custom flags which have genirq equivalents. Convert drivers to use the genirq interfaces directly, so we can kill off set_irq_flags. The translation of flags is as follows: IRQF_VALID -> !IRQ_NOREQUEST IRQF_PROBE -> !IRQ_NOPROBE IRQF_NOAUTOEN -> IRQ_NOAUTOEN For IRQs managed by an irqdomain, the irqdomain core code handles clearing and setting IRQ_NOREQUEST already, so there is no need to do this in .map() functions and we can simply remove the set_irq_flags calls. Some users also modify IRQ_NOPROBE and this has been maintained although it is not clear that is really needed. There appears to be a great deal of blind copy and paste of this code. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Imre Kaloz <kaloz@openwrt.org> Acked-by: Krzysztof Halasa <khalasa@piap.pl> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Roland Stigge <stigge@antcom.de> Cc: Tony Lindgren <tony@atomide.com> Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Simtec Linux Team <linux@simtec.co.uk> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-28ARM: appropriate __init annotation for const dataNicolas Pitre1-2/+2
Init data marked const should be annotated with __initconst for correctness and not __initdata. In some cases the array gathering references to that data has to be marked const as well. This fixes LTO builds that otherwise fail with section mismatch errors. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-17ARM/lpc32xx/timer: Migrate to new 'set-state' interfaceViresh Kumar1-26/+14
Migrate lpc32xx driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Cc: Roland Stigge <stigge@antcom.de> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2015-07-13ARM/LPC32xx: Use irq_set_handler_locked()Thomas Gleixner1-4/+4
Use irq_set_handler_locked() as it avoids a redundant lookup of the irq descriptor. Search and replacement was done with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: linux-arm-kernel@lists.infradead.org
2015-07-01Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "This contains: - a series of fixes for interrupt drivers to prevent a potential race when installing a chained interrupt handler - a fix for cpumask pointer misuse - a fix for using the wrong interrupt number from struct irq_data - removal of unused code and outdated comments - a few new helper functions which allow us to cleanup the interrupt handling code further in 4.3 I decided against doing the cleanup at the end of this merge window and rather do the preparatory steps for 4.3, so we can run the final ABI change at the end of the 4.3 merge window with less risk" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits) ARM/LPC32xx: Use irq not hwirq for __irq_set_handler_locked() genirq: Implement irq_set_handler_locked()/irq_set_chip_handler_name_locked() genirq: Introduce helper irq_desc_get_irq() genirq: Remove irq_node() genirq: Clean up outdated comments related to include/linux/irqdesc.h mn10300: Fix incorrect use of irq_data->affinity MIPS/ralink: Fix race in installing chained IRQ handler MIPS/pci: Fix race in installing chained IRQ handler MIPS/ath25: Fix race in installing chained IRQ handler MIPS/ath25: Fix race in installing chained IRQ handler m68k/psc: Fix race in installing chained IRQ handler avr32/at32ap: Fix race in installing chained IRQ handler sh/intc: Fix race in installing chained IRQ handler sh/intc: Fix potential race in installing chained IRQ handler pinctrl/sun4i: Fix race in installing chained IRQ handler pinctrl/samsung: Fix race in installing chained IRQ handler pinctrl/samsung: Fix race in installing chained IRQ handler pinctrl/exynos: Fix race in installing chained IRQ handler pinctrl/st: Fix race in installing chained IRQ handler pinctrl/adi2: Fix race in installing chained IRQ handler ...
2015-06-26ARM/LPC32xx: Use irq not hwirq for __irq_set_handler_locked()Thomas Gleixner1-4/+4
irq_data->hwirq is not guaranteed to be the same as irq_data->irq. It might be in that particular case, but it's wrong nevertheless. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Roland Stigge <stigge@antcom.de>
2015-05-06ARM: lpc32xx: convert to use clkdev_add_table()Russell King1-4/+1
We have always had an efficient way of registering a table of clock lookups - it's called clkdev_add_table(). However, some people seem to really love writing inefficient and unnecessary code. Convert LPC32xx to use the correct interface. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-09-10ARM: LPC32xx: Fix reset functionRoland Stigge1-23/+6
In the recent change to the reset function API (commit 7b6d864b48d95e6ea1df7df64475b9cb9616dcf9), the mode argument changed from a char to an enum. lpc23xx_restart() only handles REBOOT_SOFT and REBOOT_HARD, but the new kernel code emits REBOOT_COLD (0) on reboots now which leads to lpc32xx simply not rebooting (but halting). This patch fixes this by just resetting unconditionally as on other platforms (e.g. mach-bcm2835). Pulling lpc32xx_watchdog_reset() into lpc23xx_restart() since the while() in lpc23xx_restart() is part of the procedure anyway and lpc32xx_watchdog_reset() isn't used anywhere else anymore. Signed-off-by: Roland Stigge <stigge@antcom.de>
2014-06-02mmc: mmci: Enforce DMA configuration through DTUlf Hansson1-3/+0
Remove the option to provide DMA configuration as platform data, enforce it through DT. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Roland Stigge <stigge@antcom.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-04-05Merge tag 'cleanup-3.15' of ↵Linus Torvalds1-28/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Arnd Bergmann: "These cleanup patches are mainly move stuff around and should all be harmless. They are mainly split out so that other branches can be based on top to avoid conflicts. Notable changes are: - We finally remove all mach/timex.h, after CLOCK_TICK_RATE is no longer used (Uwe Kleine-König) - The Qualcomm MSM platform is split out into legacy mach-msm and new-style mach-qcom, to allow easier maintainance of the new hardware support without regressions (Kumar Gala) - A rework of some of the Kconfig logic to simplify multiplatform support (Rob Herring) - Samsung Exynos gets closer to supporting multiplatform (Sachin Kamat and others) - mach-bcm3528 gets merged into mach-bcm (Stephen Warren) - at91 gains some common clock framework support (Alexandre Belloni, Jean-Jacques Hiblot and other French people)" * tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (89 commits) ARM: hisi: select HAVE_ARM_SCU only for SMP ARM: efm32: allow uncompress debug output ARM: prima2: build reset code standalone ARM: at91: add PWM clock ARM: at91: move sam9261 SoC to common clk ARM: at91: prepare common clk transition for sam9261 SoC ARM: at91: updated the at91_dt_defconfig with support for the ADS7846 ARM: at91: dt: sam9261: Device Tree support for the at91sam9261ek ARM: at91: dt: defconfig: Added the sam9261 to the list of DT-enabled SOCs ARM: at91: dt: Add at91sam9261 dt SoC support ARM: at91: switch sam9rl to common clock framework ARM: at91/dt: define main clk frequency of at91sam9rlek ARM: at91/dt: define at91sam9rl clocks ARM: at91: prepare common clk transition for sam9rl SoCs ARM: at91: prepare sam9 dt boards transition to common clk ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs ARM: at91: Add at91sam9rl DT SoC support ARM: at91: prepare at91sam9rl DT transition ARM: at91/defconfig: refresh at91sam9260_9g20_defconfig ...