summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-imx/mm-imx27.c
AgeCommit message (Collapse)AuthorFilesLines
2012-07-01ARM: imx: remove unneeded mach/irq.h inclusionShawn Guo1-1/+0
Remove unneeded mach/irq.h inclusion from imx platform code. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Dong Aisheng <dong.aisheng@linaro.org>
2012-05-08ARM: imx: enable pinctrl dummy statesDong Aisheng1-0/+2
Enable pinctrl dummy states for imx platforms without pinctrl support. Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-03-06ARM: imx: convert audmux to a platform driverRichard Zhao1-0/+7
It coverts audmux to a platform driver, so that it can be moved into sound/soc/imx and adopt device tree support later. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-26Merge branch 'next/devel' of ↵Linus Torvalds1-0/+3
ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'next/devel' of ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (128 commits) ARM: S5P64X0: External Interrupt Support ARM: EXYNOS4: Enable MFC on Samsung NURI ARM: EXYNOS4: Enable MFC on universal_c210 ARM: S5PV210: Enable MFC on Goni ARM: S5P: Add support for MFC device ARM: EXYNOS4: Add support FIMD on SMDKC210 ARM: EXYNOS4: Add platform device and helper functions for FIMD ARM: EXYNOS4: Add resource definition for FIMD ARM: EXYNOS4: Change devname for FIMD clkdev ARM: SAMSUNG: Add IRQ_I2S0 definition ARM: SAMSUNG: Add platform device for idma ARM: EXYNOS4: Add more registers to be saved and restored for PM ARM: EXYNOS4: Add more register addresses of CMU ARM: EXYNOS4: Add platform device for dwmci driver ARM: EXYNOS4: configure rtc-s3c on NURI ARM: EXYNOS4: configure MAX8903 secondary charger on NURI ARM: EXYNOS4: configure ADC on NURI ARM: EXYNOS4: configure MAX17042 fuel gauge on NURI ARM: EXYNOS4: configure regulators and PMIC(MAX8997) on NURI ARM: EXYNOS4: Increase NR_IRQS for devices with more IRQs ... Fix up tons of silly conflicts: - arch/arm/mach-davinci/include/mach/psc.h - arch/arm/mach-exynos4/Kconfig - arch/arm/mach-exynos4/mach-smdkc210.c - arch/arm/mach-exynos4/pm.c - arch/arm/mach-imx/mm-imx1.c - arch/arm/mach-imx/mm-imx21.c - arch/arm/mach-imx/mm-imx25.c - arch/arm/mach-imx/mm-imx27.c - arch/arm/mach-imx/mm-imx31.c - arch/arm/mach-imx/mm-imx35.c - arch/arm/mach-mx5/mm.c - arch/arm/mach-s5pv210/mach-goni.c - arch/arm/mm/Kconfig
2011-07-08gpio/mxc: get rid of the uses of cpu_is_mx()Shawn Guo1-6/+7
The patch removes all the uses of cpu_is_mx(). Instead, it utilizes platform_device_id to distinguish the different gpio types, IMX1_GPIO on i.mx1, IMX21_GPIO on i.mx21 and i.mx27, IMX31_GPIO on all other i.mx SoCs. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-07ARM: mxc: clean up imx-dma device registrationShawn Guo1-0/+3
The patch follows the implementation of gpio-mxc device registration to break the concentrated imx-dma device registration into soc specific setup function. Then we can avoid the churn of "#ifdef" and the cpu_is_mx checking on such a long list, which makes no sense, considering more soc supports need to be added and we need to support single image for multiple socs in the long run. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: imx2: Fix GPIO iosizeFabio Estevam1-6/+6
On MX1, MX21 and MX27 each GPIO port has an address space of 256 bytes. Fix the iosize for these platforms. Tested on a mx27_3ds board that can boot fine after this change. Cc: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-06-06gpio/mxc: Change gpio-mxc into an upstanding gpio driverShawn Guo1-11/+10
The patch makes necessary changes on gpio-mxc as below to turn it into an upstanding gpio driver. * Add a list to save all mx2 ports references, so that mx2_gpio_irq_handler can walk through all interrupt status registers * Use readl/writel to replace mach-specific accessors __raw_readl/__raw_writel * Change mxc_gpio_init into mxc_gpio_probe function * Move "struct mxc_gpio_port" into gpio-mxc.c, as it needs not to be public at all, and also make some other cleanup on plat-mxc/include/mach/gpio.h at the same time And the patch then migrates mach-imx and mach-mx5 to the updated driver by adding corresponding platform devices. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-03-07ARM i.MX: iomux v1 initialization away from initcallSascha Hauer1-0/+3
This saves us from soc level dispatching in generic files Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM i.MX: Move gpio initialization to SoC specific filesSascha Hauer1-2/+11
This saves us from soc level dispatching in generic files Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-10ARM: imx: use .init_early to initialize cpu type and reset addressUwe Kleine-König1-2/+5
This used to be done in .map_io which is supposed to only setup the memory mapping. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-17ARM: imx: use MXxy_IO_P2V macros to setup static mappingsUwe Kleine-König1-18/+3
This makes less code rely on the virtual constants. To further simplify code and reduce the needed boilerplate when defining the static mappings a new helper macro is defined in mach/hardware.h. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-07-26imx: move gpio init after to irq initJason Wang1-1/+1
The commit 9a763bf "get rid of mxc_gpio_init" changed gpio_init and irq_init sequence. Usually we will call set_irq_chained_handler in gpio_init functions, this should be called after the irq_init called, otherwise the chained irq can't get propoer irq_chip and this irq will remain masked even we called set_irq_chained_handler. Signed-off-by: Jason Wang <jason77.wang@gmail.com> Tested-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-06-24ARM: imx: get rid of mxc_gpio_initUwe Kleine-König1-0/+3
This function is defined once for each imx family and so is in the way when compiling a kernel for more than one SoC. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-24ARM: imx: rename mach dir for mx21 and mx27 to mach-imxUwe Kleine-König1-0/+83
Finally all imx code should end up there, start with mach-mx2. While touching all files rename some files to use a hyphen instead of an underscore. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-03 05:31:10 +0000